Related
guys yesterday i flashed my sgy with creed2.5 and then with MerrukTechnology Kernel v1 and was stuck at boot screen but Version 0.7.50 RC 20 booted up but the above result was a failure with hybrid 2.1 ????
try with chocodigitals rom...............i tried it worked for me...
i think that rom had touch screen problems
Works on any ROM. The final version's out. Try the final version. Boot loops are LESS likely.
i tried that on creeds but was stuck at boot screen
Try the 7.50 version and NOT 8.0.
karthik_316 said:
try with chocodigitals rom...............i tried it worked for me...
Click to expand...
Click to collapse
Which version of Chobits Digitalis are you using, and which version of the kernel did you use?
Sent from my GT-S5360 using XDA
i tried this on 1.2 but su and rebooting problem when i install some apps.
raolemo said:
Try the 7.50 version and NOT 8.0.
Click to expand...
Click to collapse
i tried kerenal v1 final on my creed 2.1 but it lagss like hellllllll
any solution guyzzzz
kimbaduds said:
i tried this on 1.2 but su and rebooting problem when i install some apps.
Click to expand...
Click to collapse
have u tried version 0.7 rc 20 i think it is the most stable version working with custom roms
i think hybrid v3 has latest kerenal support but it still has bugs so it is currently reuploaded .waitng till further developement
hope it helped.... cheers
guys kerenal v1 works like charm with chocobit v 1.4b2 no problom at all but all my apps in sd card are lost but no worry had a backup
Will creeds rom work ?
Sent from my GT-S5360 using XDA App
murtz3841 said:
Will creeds rom work ?
Sent from my GT-S5360 using XDA App
Click to expand...
Click to collapse
Kerenal v0.7rc 20 is working good but not v 1 final (still has some bugss....)
try v0.7 it u can overclock to 900mhz
hope this helps
will repencis work with meruk?
talwarrokzz said:
guys kerenal v1 works like charm with chocobit v 1.4b2 no problom at all but all my apps in sd card are lost but no worry had a backup
Click to expand...
Click to collapse
hey do u think it all worked on chobit v1?? and what procedure do u used to flash meruk kernal v1 cwm or odin?
vEget7 said:
hey do u think it all worked on chobit v1?? and what procedure do u used to flash meruk kernal v1 cwm or odin?
Click to expand...
Click to collapse
Yup it worked pereft for me bro
did u tried the one below
http://forum.xda-
developers.com/
showpost.php?
p=24259340&postcount=
1610
initialy had superuser problems but after unrooting and rooting my phone again it worked
if u still have problems try version 0.7 RC 20 (NO SUPER USER Problems)
HOPE THIS HELPS U
talwarrokzz said:
Yup it worked pereft for me bro
did u tried the one below
http://forum.xda-
developers.com/
showpost.php?
p=24259340&postcount=
1610
initialy had superuser problems but after unrooting and rooting my phone again it worked
if u still have problems try version 0.7 RC 20 (NO SUPER USER Problems)
HOPE THIS HELPS U
Click to expand...
Click to collapse
bro in the thread u give it says "Extract system.zip to root of your sdcard - flash the kernel - wipe - reboot - reboot recovery - install ext4.zip and he we go"
in my red highlight shud i flash it using odin? bcoz i don't even try to flash via odin,hehe..
vEget7 said:
bro in the thread u give it says "Extract system.zip to root of your sdcard - flash the kernel - wipe - reboot - reboot recovery - install ext4.zip and he we go"
in my red highlight shud i flash it using odin? bcoz i don't even try to flash via odin,hehe..
Click to expand...
Click to collapse
use cwm
here is the link
http://forum.xda-developers.com/showthread.php?t=1552889
hope it helps if so do press thanks
talwarrokzz said:
use cwm
here is the link
http://forum.xda-developers.com/showthread.php?t=1552889
hope it helps if so do press thanks
Click to expand...
Click to collapse
did u used it?? hehe, bcoz in merruk kernel thread ronnie give a instruction to flash it via mai77 cmw,so what is the most prefered to used? mai77 cwm or faqbly cwm? b4 i give my thanks.. sori bro,i want 2 b more clear.. hehe..
vEget7 said:
did u used it?? hehe, bcoz in merruk kernel thread ronnie give a instruction to flash it via mai77 cmw,so what is the most prefered to used? mai77 cwm or faqbly cwm? b4 i give my thanks.. sori bro,i want 2 b more clear.. hehe..
Click to expand...
Click to collapse
both ways are good (i used faqbly meathod from the start so had made all bootable kerenals and used them) use the one whose instruction u find easy and best
because i dont want to damage your phone by forcing u to use my way buddy
its just your choice
Main thread + features + install instructions + dev support
(Also linked in the Q&A thread under DevDB)
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version by Phil can be found here:
HTC One Verizon (m7vzw)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/m7vzw
Up-to-date host maintained and compiled by @PonsAsinorem
http://goo.im/devs/PonsAsinorem/m7vzw/recovery/philz
http://d-h.st/users/PonsAsinorem/?fld_id=34223#files
Click to expand...
Click to collapse
XDA:DevDB Information
[m7vzw] PhilZ Touch - Advanced Clockworkmod, Tool/Utility for the Verizon HTC One
Contributors
PonsAsinorem, Phil3759
Version Information
Status: Stable
Created 2014-03-25
Last Updated 2014-07-12
Phil3759 said:
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Click to expand...
Click to collapse
Can this be installed through Flashify?
Sent from my HTC6500LVW using XDA Premium HD app
mchief298 said:
Can this be installed through Flashify?
Sent from my HTC6500LVW using XDA Premium HD app
Click to expand...
Click to collapse
I'm sure it could be, once there is a live link.
Unless it works and Mediafire just hates me....
Thanks for this Philz, was hoping for it.
santod040 said:
I'm sure it could be, once there is a live link.
Unless it works and Mediafire just hates me....
Thanks for this Philz, was hoping for it.
Click to expand...
Click to collapse
It's there and every time I download and install it, my phone hangs at booting recovery then resets..
Sent from my HTC6500LVW using XDA Premium HD app
mchief298 said:
It's there and every time I download and install it, my phone hangs at booting recovery then resets..
Sent from my HTC6500LVW using XDA Premium HD app
Click to expand...
Click to collapse
Yes it is, thanks.
IE wasn't showing any files at all.
Firefox loaded it up no problem.
I will test it out on my end later tonight and report back whether I get the same results or not.
mchief298 said:
It's there and every time I download and install it, my phone hangs at booting recovery then resets..
Sent from my HTC6500LVW using XDA Premium HD app
Click to expand...
Click to collapse
Same Here:crying:
mchief298 said:
It's there and every time I download and install it, my phone hangs at booting recovery then resets..
Sent from my HTC6500LVW using XDA Premium HD app
Click to expand...
Click to collapse
Yep, same here. Tried installing via flashboot. Can't wait to give this a spin, once it's working.
Has anyone got the img to flash successfully? Tried via fastboot 3 times with no luck. It looks cool any tips?
Didn't work here on flashify or my new computer using fastboot
Sent from my HTC One M7 using XDA Premium 4
upload a stock recovery or boot.img please
I use prebuilt kernels for you
That way I can fix it
Phil3759 said:
upload a stock recovery or boot.img please
I use prebuilt kernels for you
That way I can fix it
Click to expand...
Click to collapse
You can find it here. 2nd post.
http://forum.xda-developers.com/showthread.php?t=2485319
:good:
Phil3759 said:
upload a stock recovery or boot.img please
I use prebuilt kernels for you
That way I can fix it
Click to expand...
Click to collapse
Androcles said:
You can find it here. 2nd post.
http://forum.xda-developers.com/showthread.php?t=2485319
Click to expand...
Click to collapse
I do not have our latest 4.3 based one posted seperately though, since I include stock in the firmware and made the 4.3 kernel in the stock rom insecure.
But you can simply grab the full 4.3 firmware zip I have posted there, or I can upload just the Boot.img if needed.
Thanks for the quick fix...
santod040 said:
:good:
I do not have our latest 4.3 based one posted seperately though, since I include stock in the firmware and made the 4.3 kernel in the stock rom insecure.
But you can simply grab the full 4.3 firmware zip I have posted there, or I can upload just the Boot.img if needed.
Thanks for the quick fix...
Click to expand...
Click to collapse
Please upload the boot.img only + texfat.ko file in /system/lib/modules THAT WORKS WITH THAT KERNEL. It is important that they match
Phil3759 said:
Please upload the boot.img only + texfat.ko file in /system/lib/modules THAT WORKS WITH THAT KERNEL. It is important that they match
Click to expand...
Click to collapse
No problem, here you go.
Thanks again!
I just updated the m7vzw version
Please download again and try it
It is repacked with stock kernel you provided and proper ramdisk offset / cmdline
Phil3759 said:
I just updated the m7vzw version
Please download again and try it
It is repacked with stock kernel you provided and proper ramdisk offset / cmdline
Click to expand...
Click to collapse
Just flashed using Flashify, booted up into your recovery just fine. Thank you.
Sent from my One using Tapatalk
Phil3759 said:
I just updated the m7vzw version
Please download again and try it
It is repacked with stock kernel you provided and proper ramdisk offset / cmdline
Click to expand...
Click to collapse
Thanks! All set now. :good:
Working here!
Sent from my HTC6500LVW using XDA Premium HD app
Thanks to all for the prompt support
This way things can be fixed quickly
Any dev around knows if compiling exfat Samsung modules with your kernel ends up in a Crash?
That way I no longer need the stock kernels, even that they seem good for now
Just used to to make a backup and flash a new rom and had no problems at all. I gotta say this is the best recovery I have ever used, reminds me a lot of ext4 recovery on my thunderbolt, but much prettier and useful. Thanks!
guys please help me out as i'm new member i cannot post it in concern thread., i have tried to flash DN3 v4.1 BETA2 with philz recovery 5.15 and my installer ends like this (attached image of my device) it doesn't even run aroma installer and after reboot of installation i just stuck with samsung boot animation for a long time more than 20 mins..
First of all you have to update can to version 6.19.3.
When choosing install zip you have to check that the old binary is allowed to be updated. Than it should work.
Here you go for the right post!
http://forum.xda-developers.com/showthread.php?p=51078746
Otherwise you can use twrp instead of PhilZ. It's working properly on 4.4 Roms!
Sent from my GT-N7100 using XDA Premium 4 mobile app
GaneshMJ said:
guys please help me out as i'm new member i cannot post it in concern thread., i have tried to flash DN3 v4.1 BETA2 with philz recovery 5.15 and my installer ends like this (attached image of my device) it doesn't even run aroma installer and after reboot of installation i just stuck with samsung boot animation for a long time more than 20 mins..
Click to expand...
Click to collapse
Mephistd said:
First of all you have to update can to version 6.19.3.
When choosing install zip you have to check that the old binary is allowed to be updated. Than it should work.
Here you go for the right post!
http://forum.xda-developers.com/showthread.php?p=51078746
Otherwise you can use twrp instead of PhilZ. It's working properly on 4.4 Roms!
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I agree it's best to flash the ROM via twrp 2.6.3.2 and under "wipe" go to advanced and then select the first 4 options to wipe and then re install the ROM ,also you wont get that "(x) update old binary" message when using TWRP,also v4.x of DN3 rom is NOT aroma
singhpratik87 said:
I agree it's best to flash the ROM via twrp 2.6.3.2 and under "wipe" go to advanced and then select the first 4 options to wipe and then re install the ROM ,also you wont get that "(x) update old binary" message when using TWRP,also v4.x of DN3 rom is NOT aroma
Click to expand...
Click to collapse
I was able to flash the ROM via twrp latest version and I always wipe the way you said. However the ROM doesn't boot up.. Its just stuck at Samsung logo. Waited like 15 min. I have tried more than one 4.4.2 ROM but they don't boot.. I don't know why..
Sent from my GT-N7100 using Tapatalk
Mohammed779 said:
I was able to flash the ROM via twrp latest version and I always wipe the way you said. However the ROM doesn't boot up.. Its just stuck at Samsung logo. Waited like 15 min. I have tried more than one 4.4.2 ROM but they don't boot.. I don't know why..
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Which rom are you coming from? And which other 4.4.2 ROM have you tried apart from DN3?
Sent from my GT-N7100 using Tapatalk
singhpratik87 said:
Which rom are you coming from? And which other 4.4.2 ROM have you tried apart from DN3?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2672758
I tried coming from both 4.3 Samsung based ROMs and 4.4.2 CM based.
Mohammed779 said:
http://forum.xda-developers.com/showthread.php?t=2672758
I tried coming from both 4.3 Samsung based ROMs and 4.4.2 CM based.
Click to expand...
Click to collapse
Try re installing DN3 V4.1 again via clean wipe ,users in that thread have reported it flashed for them after 2-3 attempts,if it still doesn't boot for you report this in that thread and someone would be able to help you
Anyone has link to newest PhilZ?
Sent from my GT-N7100 using Tapatalk
Found it! ?
nordvik said:
Anyone has link to newest PhilZ?
Sent from my GT-N7100 using Tapatalk
Found it! ?
Click to expand...
Click to collapse
unable to post external link., kindly check you pm
nordvik said:
Anyone has link to newest PhilZ?
Sent from my GT-N7100 using Tapatalk
Found it! ?
Click to expand...
Click to collapse
singhpratik87 said:
I agree it's best to flash the ROM via twrp 2.6.3.2 and under "wipe" go to advanced and then select the first 4 options to wipe and then re install the ROM ,also you wont get that "(x) update old binary" message when using TWRP,also v4.x of DN3 rom is NOT aroma
Click to expand...
Click to collapse
Mephistd said:
First of all you have to update can to version 6.19.3.
When choosing install zip you have to check that the old binary is allowed to be updated. Than it should work.
Here you go for the right post!
http://forum.xda-developers.com/showthread.php?p=51078746
Otherwise you can use twrp instead of PhilZ. It's working properly on 4.4 Roms!
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Tried both the options before itself
GaneshMJ said:
Tried both the options before itself
Click to expand...
Click to collapse
i suggest you try flashing 4.3 samsung TW ROM or try aosp CM11 based 4.4.2 ROM,use twrp 2.6.3.1/2.6.3.2 for them as well,let me know if those flash fine for you.Thing is many users have been reporting that this ROM doesn't flash correctly for them even after following all the steps correctly.The rom is in beta stages so bugs are there,in the mean time go back to 4.3 TW rom or if you want a taste of kitkat flash this rom which i use from time to time when i get bored of 4.3 samsung roms http://forum.xda-developers.com/showthread.php?t=2336271
singhpratik87 said:
i suggest you try flashing 4.3 samsung TW ROM or try aosp CM11 based 4.4.2 ROM,use twrp 2.6.3.1/2.6.3.2 for them as well,let me know if those flash fine for you.Thing is many users have been reporting that this ROM doesn't flash correctly for them even after following all the steps correctly.The rom is in beta stages so bugs are there,in the mean time go back to 4.3 TW rom or if you want a taste of kitkat flash this rom which i use from time to time when i get bored of 4.3 samsung roms http://forum.xda-developers.com/showthread.php?t=2336271
Click to expand...
Click to collapse
Thanks.. Sure i will give a try but i love DN3 roms..
GaneshMJ said:
Thanks.. Sure i will give a try but i love DN3 roms..
Click to expand...
Click to collapse
well the developers are working hard on it and trying to make it more stable,so in the meantime get a working ROM on your note 2 and keep following the DN3 for updates,that's what i've been doing i haven't flashed the DN3 Kitkat rom at all,just been following the thread and reading about bugs and fixes,reading what people got to say about ROM and just keeping myself up to date .Personally i am waiting for @mannyvinny to release the 4.4.2 Version of the leaked ROM,i've been using his 4.3 TW ROM and never had any issues and his themes/mod are awesome.The thread to his link is this http://forum.xda-developers.com/showthread.php?t=2593200 ,bookmark it and i think by next weekend or so he'll have 4.4.2 v1 up !Good luck:good:
singhpratik87 said:
well the developers are working hard on it and trying to make it more stable,so in the meantime get a working ROM on your note 2 and keep following the DN3 for updates,that's what i've been doing i haven't flashed the DN3 Kitkat rom at all,just been following the thread and reading about bugs and fixes,reading what people got to say about ROM and just keeping myself up to date .Personally i am waiting for @mannyvinny to release the 4.4.2 Version of the leaked ROM,i've been using his 4.3 TW ROM and never had any issues and his themes/mod are awesome.The thread to his link is this http://forum.xda-developers.com/showthread.php?t=2593200 ,bookmark it and i think by next weekend or so he'll have 4.4.2 v1 up !Good luck:good:
Click to expand...
Click to collapse
Sure i will thank you so much
guys i finally did it., didn't lose hope and tried for the last time with all procedures and it finally worked, i'm on DN3 4.4.2 Beta 2 :victory: thank you everyone
GaneshMJ said:
guys i finally did it., didn't lose hope and tried for the last time with all procedures and it finally worked, i'm on DN3 4.4.2 Beta 2 :victory: thank you everyone
Click to expand...
Click to collapse
awesome!
singhpratik87 said:
awesome!
Click to expand...
Click to collapse
thank you :highfive:
thank you i was able to flash it
Mohammed779 said:
http://forum.xda-developers.com/showthread.php?t=2672758
I tried coming from both 4.3 Samsung based ROMs and 4.4.2 CM based.
Click to expand...
Click to collapse
i got success after two turns : )
thaanks guyz !
@abrar540 have fun enjoy the rom
Sent from my GT-N7100 using Tapatalk
[Q] cosmicCM 4.0 &4.1 getting stuck on Samsung logo after flash with philltz recovery
dear friends i am noob for the forum and my first question i need your help as when i flash cosmic cm v4.0 and 4.1 with phillz touch cwm recovery in galaxy grand it gets stuck at Samsung logo previously i was on cyanozenmod 11 rom please help me. I've wiped data cache delvik cheche already but no luck. Thanks in advance.
Same thing for me.don't know why
say2sumit said:
dear friends i am noob for the forum and my first question i need your help as when i flash cosmic cm v4.0 and 4.1 with phillz touch cwm recovery in galaxy grand it gets stuck at Samsung logo previously i was on cyanozenmod 11 rom please help me. I've wiped data cache delvik cheche already but no luck. Thanks in advance.
Click to expand...
Click to collapse
sharky.desire said:
Same thing for me.don't know why
Click to expand...
Click to collapse
Try using the latest version of Philz Recovery. Or use the Recovery mentioned in ROMs OP. Hope you guys are flashing after a full data wipe.
Sent from my GT-I9082 using XDA Premium 4 mobile app
DMJoh said:
Try using the latest version of Philz Recovery. Or use the Recovery mentioned in ROMs OP. Hope you guys are flashing after a full data wipe.
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am using ClockworkMod recovery with SELinux support,other roms work just fine,this one dosen't.
sharky.desire said:
I am using ClockworkMod recovery with SELinux support,other roms work just fine,this one dosen't.
Click to expand...
Click to collapse
Do a Factory Reset from recovery before and after installation of ROM...If that doesn't work then use recovery mention in OP...
Download k2wl latest kernel and flash
Sent from my GT-I9082 using xda premium
rom getting boot with k2wl kernel v1.7.6 but no dual sim data setting found.
jackeagle said:
Do a Factory Reset from recovery before and after installation of ROM...If that doesn't work then use recovery mention in OP...
Click to expand...
Click to collapse
Thanks for your valuable suggestion my problem has resolve today,by flashing k2wl kernel v1.7.6
Previously i was flashing v1.7.9 and 1.7.8 but prob. Not solved now i am happy to get this rom but found another problem that i can not change data setting for both sim as in other dual sim kitkat rom for our grand duos . Please give a clue for it. Previous version of this rom had this facility. Thanks in advance:good::good:
say2sumit said:
Thanks for your valuable suggestion my problem has resolve today,by flashing k2wl kernel v1.7.6
Previously i was flashing v1.7.9 and 1.7.8 but prob. Not solved now i am happy to get this rom but found another problem that i can not change data setting for both sim as in other dual sim kitkat rom for our grand duos . Please give a clue for it. Previous version of this rom had this facility. Thanks in advance:good::good:
Click to expand...
Click to collapse
Press The THANKS button coz it means a lot to us... The dual sim problem is already informed to developer and he said he will look into it... see here http://forum.xda-developers.com/sho...&highlight=dual+sim+data+setting#post52609871
Q&A for Tweaked Lollipop Note 3 Coming soon
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Tweaked Lollipop Note 3 Coming soon. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
is this a rom a can flash?? do I have to flash any extra stuff??
You don't have to flash anything Extra at the moment it can be use as daily driver bugs still being repair update are coming
Sent from my SM-N900T using XDA Free mobile app
MasterX007 said:
You don't have to flash anything Extra at the moment it can be use as daily driver bugs still being repair update are coming
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
Idk what I did wrong i flashed then i was stuck at a bootload at the samsung note 3 screen..... But this has happen with all the tw lollipop roms i have tried to flash so i dont know what i am doing wrong
desean93 said:
Idk what I did wrong i flashed then i was stuck at a bootload at the samsung note 3 screen..... But this has happen with all the tw lollipop roms i have tried to flash so i dont know what i am doing wrong
Click to expand...
Click to collapse
What model of Note 3 are you using and recovery you using?
MasterX007 said:
What model of Note 3 are you using and recovery you using?
Click to expand...
Click to collapse
I have a Tmobile note 3 and i am using philz touch recovery
desean93 said:
I have a Tmobile note 3 and i am using philz touch recovery
Click to expand...
Click to collapse
in philz rec choose the option wipe to install clean rom and flash the Rom aafter just reboot the device let it boot its normal for it to take up to 10 minutes during the first boot
I am also on N900T it is working great
MasterX007 said:
in philz rec choose the option wipe to install clean rom and flash the Rom aafter just reboot the device let it boot its normal for it to take up to 10 minutes during the first boot
I am also on N900T it is working great
Click to expand...
Click to collapse
Ok.... Will try again So I dont need to flash a kernal?? For some reason I believe my problem is the kernal because any time I flash a custom rom and dont flash a kernal the rom doesnt want to boot up and Im stuck on the note 3 screen
desean93 said:
Ok.... Will try again So I dont need to flash a kernal?? For some reason I believe my problem is the kernal because any time I flash a custom rom and dont flash a kernal the rom doesnt want to boot up and Im stuck on the note 3 screen
Click to expand...
Click to collapse
no need to flash a kernel one is already provided in the Rom
MasterX007 said:
no need to flash a kernel one is already provided in the Rom
Click to expand...
Click to collapse
Ok.... Thank you so much!!! I will give it another try after this one didnt work... I had given up but I will try and flash again.... I will let you know the turnout
Thanks for the ROM. I'll be testing and report back on how it works for me.
One issue I immediately see if that wifi seems to not be working for me. Every time I try and turn it on, it is either greyed out and I can't toggle it, or if I am able to toggle it, it just doesn't do anything. I rebooted, still same issue. I think I flashed it properly (I wiped data, cache, dalvik, system), but I may try flashing again.
Has anyone else had this problem and is there a fix for this?
EDIT: Did a second full wipe and flash and still no wifi. Everything else seems to work connection wise, airplane mode, bluetooth, mobile data, just not wifi.
Already fix that problem
A new update should be here soon it is being uploading to mega wifi is fix
Sent from my SM-N900T using XDA Free mobile app
MasterX007 said:
Already fix that problem
A new update should be here soon it is being uploading to mega wifi is fix
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
Yup. That fixed it. Thanks.
I'm not having success getting Xposed Framework running on this ROM. Is there a way to get it working? Screenshot included.
want know how fix the heating and the loudness twerkv1 for n900t android 5.0
please can anyone tell me how to fix or conf the sound on this rom please
Techngro said:
I'm not having success getting Xposed Framework running on this ROM. Is there a way to get it working? Screenshot included.
Click to expand...
Click to collapse
Not yet compatible. Gotta wait for Xposed developer to make it compatible.
---------- Post added at 11:47 AM ---------- Previous post was at 11:46 AM ----------
mr adrian said:
please can anyone tell me how to fix or conf the sound on this rom please
Click to expand...
Click to collapse
You can look in the ROM thread for a fix...on page 4 or 5.
DPI change?
Hey, the ROM is still going smooth. No real issues so far (except my battery life isn't as good as before, but it's not terrible or anything).
I have been trying to change the DPI on this ROM, but I have not been able to make it stick. I have tried using the build prop editor app as well as directly editing the build prop via ES File Explorer. Neither has worked. Has anyone been able to change their DPI or is there something specific that I need to do to get it working?
Techngro said:
Hey, the ROM is still going smooth. No real issues so far (except my battery life isn't as good as before, but it's not terrible or anything).
I have been trying to change the DPI on this ROM, but I have not been able to make it stick. I have tried using the build prop editor app as well as directly editing the build prop via ES File Explorer. Neither has worked. Has anyone been able to change their DPI or is there something specific that I need to do to get it working?
Click to expand...
Click to collapse
Look in your battery stats see whats causing it
Sent from my SM-N9005 using XDA Free mobile app
I keep getting "invalid argument" when I try to download the mixerpath.xml for normal sound.. Is there another link for it?
bigdreco said:
I keep getting "invalid argument" when I try to download the mixerpath.xml for normal sound.. Is there another link for it?
Click to expand...
Click to collapse
Alright im going to post another link
Sent from my SM-N9005 using XDA Free mobile app