I just want to know if "[DEV] [ROM] [4.4] Cyanogenmod 11 [WIP] [ALPHA-1]" right now is stable for our gio
thanks for replying!
don't know
don't know I bricked my gio trying to flash a wrong cwm to flash it
Nope, Camera doesn't work but everything else does
Jlaeo said:
I just want to know if "[DEV] [ROM] [4.4] Cyanogenmod 11 [WIP] [ALPHA-1]" right now is stable for our gio
thanks for replying!
Click to expand...
Click to collapse
theres no actual working recovery for CM11 kitkat
sadistic11 said:
theres no actual working recovery for CM11 kitkat
Click to expand...
Click to collapse
lol, i really have installed CM11 and is stable and smooth ..... , but thx for your comment :highfive:
Jlaeo said:
lol, i really have installed CM11 and is stable and smooth ..... , but thx for your comment :highfive:
Click to expand...
Click to collapse
can i ask what recovery did you use? and what CM11 ROM?
sadistic11 said:
can i ask what recovery did you use? and what CM11 ROM?
Click to expand...
Click to collapse
cwm 6.0.4.5 see forum(how to)all the released cm11 roms
see ---- Legacy & Low Activity Devices > Samsung Galaxy Gio GT-S5660 > Galaxy Gio GT-S5660 Original Android Development----
devrieshh said:
cwm 6.0.4.5 see forum(how to)all the released cm11 roms
see ---- Legacy & Low Activity Devices > Samsung Galaxy Gio GT-S5660 > Galaxy Gio GT-S5660 Original Android Development----
Click to expand...
Click to collapse
is that the one with blue screen?
Yes
Sent from my GT-I9070 using xda app-developers app
I've tried it, but any problem with CWM 6.0 in i downloaded. please give me the tutorial
-Download cm-11-gio.zip
-Boot to recovery 6.0.4.5, press
PHP Code:
Vol. down -> Home -> Vol. down -> Vol. down -> Home
You'll enter "Install zip from sideload"
Part 2
-Download adb 1.0.31. Connect your phone to PC via usb. Launch adb and type
Code:
adb devices
-you'll get this
Code:
12346789 sideload
-Every things go good so now type
Code:
adb sideload c:\cm-11-gio.zip
-wait 5-6 min for the rom to be copied to phone abd flashed
Part 3 The end
-After the flashing press on the phone
PHP Code:
back -> back -> vol. down -> vol.down -> Home -> vol. down -> Home
-You've full wiped the phone
-Press
PHP Code:
now back -> back -> Home
Reboot to system
Wait for the rom to boot up
Enjoy!
guys just want to share
CyanogenMod 11.0
First release (20140116) of CM11.0 for Ace & Gio is available!
Link http://get.maclaw.pl/?id=517
CyanogenMod 11.0
First release (20140116) of CM11.0 for Ace & Gio is available!
This software is in experimental stage. You’re using it on your own risk!
For flashing our KitKat you can use any recovery!
If you want to say thanks by donating us using PayPal, feel free
Do full backup before installation and wipe data/cache (factory reset) after installation (only from stock ROM).
You can get it on our DOWNLOAD page.
Changelog:
* first release
Features (what should work)
* 2D/3D HW Acceleration
* audio (both speakers/headphones/microphone)
* GPS and A-GPS
* compass
* sensors
* Wi-fi
* Bluetooth with A2DP
* all native tethers (Wifi/BT/USB)
* Google Play
* CM11 functionallity
* CPU sleep mode
* mass storage
* ADB
* YouTube HQ
* external storage
* video playing
* BLN (backlight notifications) support
* built using Linaro toolchain
Issues
* camera doesn’t work
* if you find any, let us know
I’d be glad, if you shared links to our download page, instead of direct links to download.
Also would be great, if you wouldn’t create the mirrors
Thanks.
Guys who made it happen:
* Macław
* Marcin1147
Thanks for help from:
* androidarmv6
* tom3q
If you want to say thanks by donating us using PayPal, feel free
If somehow you’ll find a bug, use our bugtracker if you want to report it.
Tried and tested using cwm recovery V6.0.3.2
Related
CyanogenMod 7 for Samsung Galaxy S Series Phones
MAINTAINERS
Samsung Captivate
atinm - http://twitter.com/atinm
unhelpful - http://github.com/Unhelpful
Samsung Galaxy S GT-I9000
codeworkx - http://twitter.com/codeworkx
coolya - http://twitter.com/dumdidum
guiper -http://twitter.com/guiperpt
Samsung - http://twitter.com/helvio
Galaxy S GT-I9000B
helvio http://twitter.com/helvio
Samsung Vibrant
coolya -http://twitter.com/dumdidum
SOURCES
GITHUB: http://github.com/teamhacksung
HOWTO BUILD: /http://forum.cyanogenmod.com/topic/15513-gt-i9000-cyanogenmod-7-developer-thread/
WARNING
This release contains a lot of bugs and is purposed for testing only. It's not ready for daily use!
Don't flash this rom if you aren't able to solve some problems without our help.
Don't make any feature requests!
INFORMATIONS
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
INSTRUCTIONS
FIRST TIME FLASHING CM7 TO YOUR SAMSUNG GALAXY S SERIES PHONE:
* Make sure your phone is fully charged! Update process will take some time.
* Make sure there's enough free space at your internal sdcard (200MB)
* Make sure you've not disabled HSPA by using the dialer code *#301279#
* Download following files from sourceforge: Captivate https://sourceforge.net/projects/teamhacksung/files/captivate | Galaxy S https://sourceforge.net/projects/teamhacksung/files/galaxys | Galaxy S B https://sourceforge.net/projects/teamhacksung/files/galaxysb| Vibrant https://sourceforge.net/projects/teamhacksung/files/vibrant
- DEVICE-efsbackup.zip
- cm7-DEVICE-initial-kernel.tar
- cm7-DEVICE-initial-XXXXXXXX.zip
* Copy following files to your internal sdcard
- DEVICE-efsbackup.zip
- cm7-DEVICE-initial-XXXXXXXX.zip
* Flash a kernel which comes with clockworkmod-recovery using odin: Captivate http://www.google.com/url?q=http://...QQFjAA&usg=AFQjCNEZGUqZZwymvX012BLsd16hxwz3Ag | Galaxy S http://forum.xda-developers.com/showthread.php?t=822756| Vibrant http://forum.xda-developers.com/showthread.php?t=962780
* Reboot into recovery using 3-button-combo and apply DEVICE-efsbackup.zip.
- Don't use "reboot recovery" command or other shiny things to do this!
* Flash cm7-DEVICE-initial-kernel.tar as pda using odin without auto-reboot and without re-partition
* Reboot into recovery using 3-button-combo
* Choose "mounts & storage" and format system, data, cache
* Apply zip from sdcard: cm7-DEVICE-initial-XXXXXXXX.zip
* Do a factory reset / data wipe!
* Reboot
* OPTIONAL: Copy Gapps to your internal sdcard and flash it at recovery.
* DEVICE = stands for your device name. e.g. captivate, galaxys, galaxysb, vibrant
UPGRADING FROM EARLIER CM7-RELEASE:
* Download the updated package update-cm-7-XXXXXXXX-NIGHTLY-DEVICE-signed.zip from sourceforge: Captivate https://sourceforge.net/projects/teamhacksung/files/captivate | Galaxy S https://sourceforge.net/projects/teamhacksung/files/galaxys | Galaxy S B https://sourceforge.net/projects/teamhacksung/files/galaxysb | Vibrant https://sourceforge.net/projects/teamhacksung/files/vibrant
* Copy it to your internal sdcard
* Reboot into recovery
* Do a Nandroid Backup!
* Choose "install zip from sdcard" -> "choose zip from sdcard", choose update-cm-7-XXXXXXXX-NIGHTLY-DEVICE-signed.zip and apply it! (Google Apps will be restored automatically)
* Reboot
* DEVICE = stands for your device name. e.g. captivate, galaxys, galaxysb, vibrant
FLASHING ANOTHER RADIO IMAGE:
* Download the desired radio package cm7-DEVICE-radio-XXX.zip from sourceforge: Captivate https://sourceforge.net/projects/teamhacksung/files/captivate| Galaxy S https://sourceforge.net/projects/teamhacksung/files/galaxys| Galaxy S B https://sourceforge.net/projects/teamhacksung/files/galaxysb| Vibrant https://sourceforge.net/projects/teamhacksung/files/vibrant
* Copy it to your internal sdcard
* Reboot into recovery
* Choose "install zip from sdcard" -> "choose zip from sdcard", choose cm7-DEVICE-radio-XXX.zip and apply it!
* Reboot
* DEVICE = stands for your device name. e.g. captivate, galaxys, galaxysb, vibrant
ADDITIONAL INFORMATION
* Install the Nexus S USB-Drivers from SDK-Manager if you're using windows.
* Don't flash any other kernels! It will break your system.
* To revert to a samsung rom, simply use odin with repartition option enabled.
* Don't try to convert a onenand partition to another filesystem!
* To format a onenand partition at shell use erase_image. e.g.: erase_image system, erase_image cache
* To flash a image to onenand partition at shell use flash_image. e.g.: flash_image system system.img, flash_image boot zImage
FAQ & USER DISCUSSION
http://forum.cyanogenmod.com/topic/15278-all-models-cyanogenmod-7-faq-user-discussion/
KNOWN BUGS
* Polling problem on RIL (works after lock and unlock)
* 2G/3G toggle (works if no data connection is active)
* Compass (works not at 100%)
* commands: reboot recovery, reboot download (maybe not possible to implement)
* FM-Radio
* TV-Out
HOW TO REPORT BUGS OR PROBLEMS?
* Issues Tracker: link http://code.google.com/p/cyanogenmod7-for-samsung-galaxys/issues/list
* If the device was hard reboot, please provide the file "/proc/last_kmsg".
* If the device was soft reboot or is "bootlooping", please run a logcat http://wiki.cyanogenmod.com/index.php?title=Logcat and provide the full ourput.
* Please use Pastebin http://cyanogenmod.pastebin.com/ when possible.
DOWNLOADS
NEW NAMING FOR UPDATES, EXAMPLE: "update-cm-7-03102011-NIGHTLY-GalaxyS-signed.zip"
Captivate
Sourceforge: link https://sourceforge.net/projects/teamhacksung/files/captivate
Galaxy S GT-I9000
Sourceforge: link https://sourceforge.net/projects/teamhacksung/files/galaxys
Galaxy S GT-I9000B
Note: Fully untested!
Sourceforge: link https://sourceforge.net/projects/teamhacksung/files/galaxysb
Vibrant
Sourceforge: link https://sourceforge.net/projects/teamhacksung/files/vibrant
Google Apps Addon
Version: gapps-gb-20110307-signed.zip
Mirror: link http://android.d3xt3r01.tk/cyanogen/gapps/
Mirror: link http://goo-inside.me/gapps/
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
SUPPORT US
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3N9W7K94QCZKL
All Donations will be split up and redirected to all involved developers.
And/Or if you want to thank atinm (a liver transplant survivor), sign up as an organ donor http://donatelife.net/
This post has been edited by codeworkx: 11 March 2011 - 08:05 PM
6
CHANGELOG
04102011
- usb tethering fixed
- modified sensitivity of haptic feedback
04092011
- usb sharing of external sdcard (breaks usb tethering)
03312011
- headphones
03262011
- front facing camera
03182011
-storage update
03122011
- decreased wifi scan interval
- fixed storage menu (settings)
03112011
- disabled extended JNI checks (Skype)
- modifications on SGSTheme
03102011
- cpufreq
20110309
- wifi sleep fixed
20110304
- nothing new but fresh builds for all four devices!
- moved hosting to sourceforge for all devices
- changed build id to GRI40
- changed product model to GT-I9000, SGH-T959 and so on...
This post has been edited by codeworkx: Yesterday, 08:31 PM and uptated on xda by fbousk 18/03/2011 10:14 am
Wow!
Sent from my GT-I9000 using XDA App
Thanks for the update, would not have known otherwise. I'm not adventurous enough though as i've got a Bell i9000m and woried about mine getting bricked again for the 4th time heh. Any bell users try this though?
I advise that only people who know can read instructions should use this, random reboots is quite annoying at times. There are also quite a lot of bugs. Can't wait for the guys to fix all the big bugs. Hopefully not to long now
guys where can i find spedmod k12n becouse harcdcore doesnt have it uploadet anymore...
use the latest spedmod it should work
smukc said:
guys where can i find spedmod k12n becouse harcdcore doesnt have it uploadet anymore...
Click to expand...
Click to collapse
inside galaxy initial package there is speedmod kernel...
speedmod-kernel-k12n-500hz.tar is included in cm7-galaxys-initial-package.zip.
it's just for the efs backup. the kernel will go away after this.
smukc said:
guys where can i find spedmod k12n becouse harcdcore doesnt have it uploadet anymore...
Click to expand...
Click to collapse
This speedmod is in initial package-just extract it
codeworkx said:
speedmod-kernel-k12n-500hz.tar is included in cm7-galaxys-initial-package.zip.
it's just for the efs backup. the kernel will go away after this.
Click to expand...
Click to collapse
1) Thank you!
2) Ist there something special about the "n" Version, or is it just the "tested" one?
This is a dream come true
Sent from my Legend using XDA App
MrBusiness said:
1) Thank you!
2) Ist there something special about the "n" Version, or is it just the "tested" one?
Click to expand...
Click to collapse
We've tested this one. But you can use any kernel which uses cwm recovery.
just a quick question guys..
am i right to say flashing this rom is like flashing any other rom on xda and if anything happens i can just use CWM or ODIN to reflash/unbrick the phone? will it like permanently brick or "destroy" my phone in any way?
Is the camera Working now?
Sent from my GT-I9000 using Tapatalk
You are right if you have any problem, just reflash a Samsung ROM in Odin.
BUT I STRONGLY RECOMMEND TO DO THAT ONLY IF YOU HAVE PERMANENT DOWNLOAD MODE.
I am a tester of this ROM for 2 weeks now and the ROM is pretty stable.
EDIT : READ ISSUES LIST.
By the way: I'm looking for a bricked i9000 to test some bootloader stuff.
Anyone here with a bricked i9000?
no market in it...
Are you BLIND ?
+ DID YOU EVER USE CYANOGEN ?
+ Read the damn post by Codewokx on CM FORUM and you will have market...
zeeshee said:
no market in it...
Click to expand...
Click to collapse
Back to my previous point, you should not use this if you cannot read.
Have anyone tested camerafun with CM7? I remember that camerafun was the only camera app that actually had colors (on preview) on CM6.1. So maybe it works om CM7 too?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's working:
GSM
Receiving and making calls
Display
Audio playback
Audio recording
Video playback
Camera (photos, panorama)
Touch
GPS
WiFi
Wifi tethering
OpenGL rendering
Hardware video decoding & encoding
Video recording
USB-tethering
Mtp/ptp
Sending/receiving SMS/MMS
Sd card
Bluetooth
Not working:
Camcorder is buggy for some users.
Apps on SD uninstall themselves after a reboot.
It's entirely possible that features not used by me are broken, but overall the device should be usable. You have been warned.
DAE OVERCLOCK?!
Download
BETA 1
BETA 2 - No changes from beta 1, forget it.
Beta 3
[URL="https://sourceforge.net/projects/lgl7mods/files/%5BP700%5D%20LG%20L7/CM10.1/cm-10.1-20130716-UNOFFICIAL-p700.zip/download"]Beta 4
[/URL]
Beta 4.1
Beta 6
Gapps: http://goo.im/gapps/gapps-jb-20130301-signed.zip
Install instructions:
Note : CM-10.1 is only for jellybean (v20) baseband. If you are on ics (v10) baseband flash v20 baseband from this thread
Format everything other then Sd card (Full format is must needed when you flash cm10.1 1st time)
Flash the CM10.1 zip
Reboot
boot into recovery mode
Install gapps
Reboot
Upgrading from earlier version of CyanogenMod 10.1:
Boot into Recovery
Wipe cache and dalvik cache
Flash CM10.1 zip
Reboot
PLEASE DONT MIRROR MY DOWNLOAD LINKS
Source:
https://github.com/TeamHackLG
https://github.com/PecanCM
https://github.com/CyanogenMod
https://github.com/androidarmv6
Thanks to:
TeamHackLG
Codeaurora forum
CyanogenMod Team
and everyone who's been working on CM10.1
This rom would not be possible without @PecanCM 's and @cybojenix 's help. Please consider a donation to them!
We are TeamHackLG. Cheers!
Changelog:
Beta 1:
Initial Commit
Beta 2:
Bad build, no changes
Beta 3:
- BT fix
- CM Upstream updates
- Gapps now work correctly
- Mass storage works
- Camcorder still broken
Beta 4
- Fixed camcorder
- Fixed gmaps restart
- Common changes :
alsa_sound: call voice volume api for direct output also
fix configuration for VOIP calls - totally untested
libaudio: update AudioPolicyManager for mr1
nfc is now turn off by default
KGSL (gpu) driver Ported from CAF'S jb_2.5 branch
netfilter fixes from aosp-common/android-3.4
ion: ion mini upgrade
Click to expand...
Click to collapse
- Upstream changes from CM
Beta 4.1
- Should be smoother
- Upstream changes from CM
Beta 6
Revert "msm7x27a-common: build power hal"
use new-ion api
Updated cm source
Q: there is no reboot options in power menu, Why?
A: Go to the Settings -> Developer options -> Advanced reboot
Q: The 'Developer and Performance options' from 'settings' are gone. Where are they?
A: Touch the 'Build number' seven times in 'about phone'. Then they will appear.
Q: Can you add HALOHOOLO V6SUPER123CYL NOS Script?
A: No! Cm will be stock.
Great news!!!! I will test this later
Now now download, great wooork friend!!
Enviado desde mi LG-P700 usando Tapatalk 4 Beta
Need Format Sd Card ?
4870x2 said:
Need Format Sd Card ?
Click to expand...
Click to collapse
nope
And Work With Gandalf Oc Kernel ? : )
4870x2 said:
And Work With Gandalf Oc Kernel ? : )
Click to expand...
Click to collapse
It will probably brick your phone. I'll probably update gandalf kernel.
tudorsirb said:
It will probably brick your phone. I'll probably update gandalf kernel.
Click to expand...
Click to collapse
thank you tudorsirb for your hard work!!
Sent from my LG-P700 using xda premium
so finally audio routing works on l7, nice
PecanCM said:
so finally audio routing works on l7, nice
Click to expand...
Click to collapse
yeah, turned out i forgot to save new ueventd
ALL FC " unfortunately, setup wizard has stopped" :/
axelgrox said:
ALL FC " unfortunately, setup wizard has stopped" :/
Click to expand...
Click to collapse
yeah, i just flashed gapps and got that. lookking for a fix
NFC Kill Battry : (
Wow, its beautifull!
Thanks!
Sent from my Nexus 7 using XDA Premium HD app
tudorsirb said:
yeah, i just flashed gapps and got that. lookking for a fix
Click to expand...
Click to collapse
I also format the internal memory: (
bart452 said:
Wow, its beautifull!
Thanks!
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
do you have any problem with gapps installation?
i followed instructions but why am i getting bootloop?
Didn't installed it yet, I always forget
Sent from my LG-P700 using xda app-developers app
Because my English is poor, sorry.
Writes using Google translator.
Test Device : Galaxy Nexus(GSM), MAGURO
A. Third Boot
1st Rom : Miui (android 4.2.2)
2nd Rom : Liquid Smooth 2.8(android 4.2.2)
3rd Rom : GummyRom (android 4.3)
B. Recovery & ubuntu_touch boot
* Kernel information *
kernel name : HyperKernel v1.3
Kernel Version : 3.0.100
Kernel Author : JijonHyuni
Main kernel source : https://github.com/JijonHyuni/HyperKernel-JB
* The ability to support *
HyperRamdisk: Android 4.2 ~ 4.3, Miui bootable
(Liquid a full-wipe when flashing the kernel bootable OK)
Live OC
gpu OC
Custom Voltage
Color Control
FastCharge
Battery Life eXtender
Sound Control
vibration control
PGM
* WARNING *
IMEI(EFS) and SD backup before installing recovery is required.
* 2nd Rom , 3rd ROM Installation Guide *
1 . Recovery installation : Install> HyperKernel-recovery-v1.0.zip
2 . Script Installation : Install> multi-twrp.zip
3 . Reboot
4 . Multi- ROM Installation : Advanced> MultiRom> Add Rom
"Android", "Don't share" Check > Next> ZIP file> Click rom file
5 . Additional Installation ( ex : gapps.zip ): Advanced> MultiRom> List ROMS
installed rom click > Flash Zip> gapps.zip installation
6 . Rom rename : Advanced> MultiRom> List ROMS
installed rom click > Rename> 2nd or 3rd
7 . Install the kernel for multi : Install> HyperKernel-v1.3.zip installation
* Ubuntu-touch installation guide *
Same as above 1-3 times (if you pass the above operation)
4. Advanced> MultiRom> Add Rom > "Android", "Don't share" Check > Next> ZIP file>
saucy-preinstalled-touch-armel + maguro.zip
5. Advanced> MultiRom> List ROMS>
saucy-preinstalled-touch-armel + maguro click and change the name to ubuntu
6. home key> Install>
saucy-preinstalled-touch-armhf.zip and saucy-ubuntu-maguro-patch.zip installation
7. Install the kernel for multi: Install> HyperKernel-v1.3.zip installation
* Boot Guide *
1. only 1st Rom > single boot (no wait button)
2. 1st Rom & 2nd Rom or 3rd Rom
- Do not press any button during boot> 1st Rom boot
- Pressing a button during boot> 2nd or 3rd rom boot
3. 1st Rom & 2nd Rom & 3rd Rom
- Do not press any button during boot > 1st Rom boot
- Vol Down press any button during boot > 2nd Rom boot
- Vol up press any button during boot > 3rd Rom boot
4. Ubuntu_touch booting
- recovery mode > 2. Select Start ubuntu_touch
(saucy-preinstalled-touch-armel + maguro.zip and saucy-preinstalled-touch-armhf.zip installed.
Selection menu appears)
* Multi-ROM for installation errors if I *
Q: 1st Rom JB 4.2 version of the ROM is installed, and
If you install the 4.3 Multi-Rom
A: I have an error after extracting the Romans
Updater-script43 attached updater-script to rename the file after the
/ META-INF/com/google/android / Copy
Re-compress> installation attempt
Download
* Thanks to *
Tasssadar
TeamWin
Cyanogenmod Team
Paranoid Android
Canonical
anarkia1976
imoseyon
ezekeel
Gummyrom for maguro?? Where did you get it?
grtz from the crazy bastard from holland powered by supernova
schukje said:
Gummyrom for maguro?? Where did you get it?
grtz from the crazy bastard from holland powered by supernova
Click to expand...
Click to collapse
Gummy ROM was built from the source
Jijonhyuni said:
Gummy ROM was built from the source
Click to expand...
Click to collapse
Hopefully we will see it back on xda soon because i loved gummy
grtz from the crazy bastard from holland powered by supernova
@Jijonhyuni Welcome do you know anything about any available 3.4 linux kernel source code for the tuna?
Sent from my Galaxy Nexus using Tapatalk 4
both roms are working fine hwen dualboot with ubuntu touch?
You are a great friend!!! thanks for your contribution to the community from the Galaxy Nexus! By chance would you know to help other developers for porting Kernel 3.4 for Galaxy Nexus? @Jijonhyuni
---------- Post added at 03:02 PM ---------- Previous post was at 03:02 PM ----------
You are a great friend!!! thanks for your contribution to the community from the Galaxy Nexus! By chance would you know to help other developers for porting Kernel 3.4 for Galaxy Nexus? @Jijonhyuni
I would love to see @Jijonhyuni help develop Kernel 3.4 for Galaxy Nexus !! Also what is the kernel version no, as quoted in his post , can anyone clarify ??
drive2droad said:
I would love to see @Jijonhyuni help develop Kernel 3.4 for Galaxy Nexus !! Also what is the kernel version no, as quoted in his post , can anyone clarify ??
Click to expand...
Click to collapse
3.0.100
VERSION = 3
PATCHLEVEL = 0
SUBLEVEL = 100
EXTRAVERSION = -rc2
NAME = Sneaky Weasel
https://github.com/JijonHyuni/HyperKernel-JB/blob/master/Makefile
is needed the hyper kernel for dual-tri boot..or i can use the mpokang or other kernel??
ok the procedure works perfectly!
I did the dual boot with:
1st Rom: AOKP mr2 (Android 4.3)
2nd Rom: Miui 9.3.27 (Android 4.2.2)
Only problem: In the partition of the second Rom (Miui) the available memory is 0 and I can not install any 'application.
How can I do? @Jijonhyuni
How do erase the ubuntu partition???
Edit:
Delete the folder in : data/ubuntu
Pasquale91fg said:
Only problem: In the partition of the second Rom (Miui) the available memory is 0 and I can not install any 'application.
How can I do? @Jijonhyuni
Click to expand...
Click to collapse
+1
Sent from my GT-P6200 using xda app-developers app
For some reason I'm losing root on my first rom as soon as I flash the kernel I boot back up and I no longer have root access.. but on my second ROM I have root any idea why it does this and how I can fix it crdroid 1st paranoid 2nd
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Cant boot into Ubuntu as second rom?
When i go into recovery i see ubuntu_touch right before the screen goes away, then TWRP opens. How do i get it to boot into ubuntu instead of skipping the screen
EDIT: Finally got to the boot screen for "start Ubuntu_touch"
lots of errors and it froze
omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducati-m3.bin
That was the last line of error
how can I install Ubuntu touch into this?
citrix80 said:
how can I install Ubuntu touch into this?
Click to expand...
Click to collapse
+1
larry567 said:
+1
Click to expand...
Click to collapse
??
Any way to get this from another file host? 4shared isn't letting me get the free download.
The latest build is Ubuntu Touch 14.04 (Trusty Tahr) Daily Build. On page 1, step 6, install Ubuntu need install saucy-ubuntu-maguro-patch.zip. I have saucy installed. how can I update to trusty. is there a trusty-ubuntu-maguro-patch.zip ?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
IMPORTANT INFORMATIONS
We will not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our instructions word by word
are unfriendly
WIKI
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/Endeavoru_Info
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your HTC One X (GSM), or coming from another ROM:
Read the official wiki
Read known issues ans FAQs
DO A BACKUP
Unlock your device via http://www.htcdev.com if you haven't done so already
Flash the preferred (touch / non-touch) HTC One X (GSM) recovery image from http://www.clockworkmod.com/rommanager via Fastboot
DO A DATA WIPE / FACTORY RESET
Copy GApps and the CM 11.0 zip to your SD card
Boot into Recovery
Flash the CM 11.0 zip from SD card
Flash GApps for KitKat from SD card
Flash the boot.img included in the CM 11.0 zip via Fastboot
Reboot
Don't restore system data using Titanium Backup!
Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 11.0:
Copy the CM 11.0 zip to your SD card
Boot into Recovery
DO A BACKUP
Flash the CM 11.0 zip from SD card
Optionally flash the most recent GApps if you encounter problems
Flash the boot.img included in the CM 11.0 zip via Fastboot if necessary. If in doubt, flash it.
Reboot
Upgrading from CyanogenMod 10.2:
Read known issues ans FAQs
DO A BACKUP
Flash the preferred (touch / non-touch) HTC One X (GSM) recovery image from http://www.clockworkmod.com/rommanager via Fastboot
Copy GApps and CM 11.0 ZIP to your SDCard
Boot into Recovery
Flash the CM 11.0 zip from SD card
Flash the GApps zip from SD card
Flash the boot.img included in the CM 11.0 zip via Fastboot
Reboot
Patience, it can take a while for the device to settle. The boot animation should disappear after 2-3 minutes.
DOWNLOADS
ClockworkMod-Recovery: http://www.clockworkmod.com/rommanager (search for "HTC One X (GSM)")
CM11.0 official stable builds: http://download.cyanogenmod.org/?device=endeavoru&type=snapshot (read http://www.cyanogenmod.org/blog/cm-11-m4-post-release-items)
CM11.0 official nightly builds: http://download.cyanogenmod.org/?device=endeavoru&type=nightly
Google Apps: http://wiki.cyanogenmod.org/w/Google_Apps
CHANGELOG
BBQDroid: http://changelog.bbqdroid.org/#endeavoru/cm11.0/next
CMXLog: http://www.cmxlog.com/11/endeavoru
KNOWN ISSUES
Audio may be problematic with MHL.
Sense 5 camera features not available (no burst, no zero-shutter-lag, picture quality seems to be worse).
Proximity sensor issues (screen stays black after call, hardware issue, it may not affect you).
Workaround: install Rezound Prox Sensor Calibrator and play with the PS1_CANC slider).
No P2P/Wi-fi Direct.
Screen corruption after unlocking when the device was rotated.
Just let it rotate again or close and re-open the app.
Crashes and freezes when using a docking station.
I can't test this. More reports and logcats are welcome.
FAQ
Can I dirty flash coming from CM 10.2?
Yes, generally it should work. Don't forget to flash CM 11.0 gapps and boot.img
Where is the Superuser App?
The Superuser App is now part of CM. You can find it in the Setting under the System category. Make sure you enable root access for Apps in the Superuser settings. In case you can't find it enable the "Developer options" by tapping "Build number 7" in "About phone" 7 times and enable root access there.
Where are the Sweep2Wake, Button Backlight Notifications, NVIDIA Smart Dimmer and Fast Charge Settings?
Gone or moved to other menus. But the functionality is still in the framework. See second post for details.
Where is the "Developer options" menu?
Hidden by default. Go to "About phone" and press "Build number" seven times to show it.
When do the nightlies start? When do upload the next version? When do you fix XYZ?
I don't know.
Does ART (the new Android runtime) work
Generally yes, but some apps (even from Google) have problems. Also the cache files use more space than with Dalvik. So if you have many apps installed you will run out of space.
But I enabled it anyway and now my phone doesn't start anymore .
The setting is persisted on the /data parition. So execute "echo -n libdvm.so > /data/property/persist.sys.dalvik.vm.lib" in the recovery (don't forget to mount /data). You can also execute is as root while the phone is trying to boot.
Here are instructions to enable or disable some features that were previously in the advanced settings menu.
Button Backlight Notifications (enabled by default)
Button backlight notifications are enabled/disabled by settings write permissions on a special file. To disable them remove the write permission for the sysfs file with
Code:
chmod 444 /sys/class/leds/button-backlight/slow_blink
Only execute it while the lights are not currently blinking.
The newest kernel also contains the ability to limit to the notification brightness. Do
Code:
echo 1 > /sys/class/leds/button-backlight/slow_blink_brightness_limit
to limit the brightness to your normal button backlight brightness (which you can adjust in the settings).
Fast Charge (disabled by default)
Fast charging is disabled by default and can be enabled with
Code:
echo 1 > /sys/devices/platform/htc_battery/fast_charge
Sweep2Wake (disabled by default)
Code:
# Enable s2w
echo 1 > /sys/android_touch/sweep2wake
# Adjust the needed swipe length. 325 for one button (default), 500 for two buttons and 850 for three buttons
echo 500 > /sys/android_touch/s2w_min_distance
# Disable direction independent behaviour
echo 0 > /sys/android_touch/s2w_allow_stroke
DoubleTap2Wake (disabled by default)
Like the name suggests. You can wake your device by double tapping anywhere on your hardware keys.
Code:
# Enable dt2w
echo 1 > /sys/android_touch/s2w_allow_double_tap
There are some tunables to adjust the minimum time span between taps (s2w_double_tap_duration) and maximum timespan (value of s2w_double_tap_duration + value of s2w_double_tap_threshold).
Nvidia SmartDimmer (disabled by default)
Now called "Adaptive backlight". Setting was moved to the "Display & LED" menu.
All settings where you manually have to execute a command are not persisted between reboots. You can use a third party app that supports toggling the settings or you can put the commands into /data/local/userinit.sh to apply them at boot.
Merry Christmas! If you don't celebrate Christmas then have a nice week!
Thömy said:
Merry Christmas! If you don't celebrate Christmas then have a nice week!
Click to expand...
Click to collapse
Big present!
Thömy said:
Merry Christmas! If you don't celebrate Christmas then have a nice week!
Click to expand...
Click to collapse
Waiting for christmas from almost a year ....and here is a bang of kitkat Rom from you ....
Thanks
Sent from my HTC One X using XDA Premium 4 mobile app
It is a real Christmas for all HTC one x owners
Merry Christmas to all of us. Me. You. And the one there behind the closet hiding
Sent from my Nexus 7 using xda app-developers app
AWWWEESOMEEE! I saw the delete post on the other forum it imagine was something like this.
downloading now! can't wait to install:fingers-crossed:
Thomy thanks for the cm11 build. One question will this work on philz recovery or would you advise using the recovery on op.
A splendid Christmas present. Now our HOX is back in business!!
paulh1978 said:
Thomy thanks for the cm11 build. One question will this work on philz recovery or would you advise using the recovery on op.
Click to expand...
Click to collapse
I don't know. I never used a recovery besides CWM and the CM one I had to compile myself.
paulh1978 said:
Thomy thanks for the cm11 build. One question will this work on philz recovery or would you advise using the recovery on op.
Click to expand...
Click to collapse
Better use recovery from op. Kit kat come with new permision.
Better...try flash with philz first and report if it working or not so other will know that too.
Sent from my EndeavorU using Tapatalk
Just downloading now will give it a try with philz and report back.
That is great, thank you for your hard work Downloading now.
fthunter said:
That is great, thank you for your hard work Downloading now.
Click to expand...
Click to collapse
Best Christmas present ever! (Don`t tell my wife)
Merry Christmas and thanks for all your hard work you have but into this great rom
Sent from my GT-I9100 using XDA Premium 4 mobile app
Gives me an Error:
Code:
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '/sdcard/Zips/CM11/cm-11-201312224-UNOFFICIAL-endevouru.zip'
Error flashing zip '/sdcard/Zips/CM11/cm-11-201312224-UNOFFICIAL-endevouru.zip'
I was using TWRP, solved when I used recovery from op.
FYI.
Wooow!! Thankyou sooo much I have been waiting for a KK to drop for my HoX!! Installing .... Merry Xmas all !!! )
Ambious said:
Gives me an Error:
Code:
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '/sdcard/Zips/CM11/cm-11-201312224-UNOFFICIAL-endevouru.zip'
Error flashing zip '/sdcard/Zips/CM11/cm-11-201312224-UNOFFICIAL-endevouru.zip'
Click to expand...
Click to collapse
Recovery issue. Use recovery from op
Sent from my EndeavorU using Tapatalk
I tried all day to build it myself!!! tnx thomy
Sent from my EndeavorU using Tapatalk
CyanogenMod is a free, community built distribution of Android 5.1 which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
XDA:DevDB Information
[DEVELOPMENT] - CM12.1 - Android 5.1 - FreeXperia Project, ROM for the Sony Xperia Z1
Contributors
jerpelea
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2014-12-02
Last Updated 2015-04-13
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
ENJOY AN UNOFFICIAL CM RELEASE BROUGHT TO YOU BY FreeXperia Team
PLEASE DONT MIRROR OUR ROMS
Homepage
www.freexperiaproject.net
thanks to all who made this possible supporting us
contributing with code, donations or even trusting us
thanks to SONY that made all this possible !
Guys its here http://fxpblog.co/cyanogenmod/cyanogenmod-12/
Seems one link for many devices
Also Changlog will be given here - http://fxpblog.co/cyanogenmod/changelog/
According to comments in the Z2 similar thread, NO camera yet, NO mic yet, and if I'm right, NO earpiece in this build. Let's wait and see though...
THIS IS A DEVELOPMENT THREAD GUYS.
Stop posting spam here.
/Mod please clean
Thread cleaned
Already. C'mon guys. Bug reports and LOGCATS please
Great jobs bros. Let's wait for the one which microphone works.
Just wait and be patient. ROM was not build in a day ?
Sent from my Xperia Z1 using Tapatalk
camera funcionaly?
we have enabled daily builds
if your device is not yet in the list will appear soon (1 day,1 week, 1 month) no ETA please
but you have to remember that is an early alpha build
Honami build
At download site you can now see honami 05.12.2014 build so have a nice testing ;]
iHubHost said:
This is why i asked fir a wirking/non-working list, I cant test as i have no time to.
Click to expand...
Click to collapse
Today i flash this Rom and write working/not working list but download is very slow like 50kb/s and take this 3h
I flashed kernel but I can't get into recovery to install rom. I tried a lot of combinations. Any sugestions?
syaman89 said:
I flashed kernel but I can't get into recovery to install rom. I tried a lot of combinations. Any sugestions?
Click to expand...
Click to collapse
Why u r flashing the Kernel separately? Just flash the zip from ur previous ROM Recovery with full wipe.
Btw Recovery might be broken in Newest build
just downloaded going to test it right now!! I'll report back as soon as i can (the report comes today! )
---------- Post added at 04:43 PM ---------- Previous post was at 04:31 PM ----------
Working:
- sd card and internal memory
-video playback
-sound (youtube etc)
-brightness control
-calls (for now with headset cause of mic bug)
-mobile data
-bluetooth
-nfc
-gps
-recovery ( only when you select it in the reboot options)
-everything thats NOT in the not working list
NOT WORKING
-wifi
-microphone
-camera
-recovery by hitting the volume key at booting
-deeplseep
To fix WiFi try this
[quote name="moritz31" post=57259286]wifi workaround from other Thread:
The following is in the wrong locaion:
/etc/firmware/wlan/prima/WCNSS_qcom_wlan_nv.bin
Click to expand...
Click to collapse
The wlan.ko modules is looking for it hear:
/data/misc/wifi/prima
Click to expand...
Click to collapse
The easy way to fix is:
adb shell
cp -r /etc/firmware/wlan/prima/ /data/misc/wifi/
adb reboot
Click to expand...
Click to collapse
Cleaned up some offtopic
kamikaze134x said:
To fix WiFi try this
[quote name="moritz31" post=57259286]wifi workaround from other Thread:
The following is in the wrong locaion:
The wlan.ko modules is looking for it hear:
The easy way to fix is:
Click to expand...
Click to collapse
I confirm, wifi works with this fix
I hate uploaded.net im not able to download anything from it. Sucks.