Related
Hi Guys, i was just wondering if this has been done beofre, and if not why not?
I was wondering if your phone could read your caledar and adjust the phone's ringtone, ring volume level, key tones etc to suit.
scenario 1: your calendar says you are in a meeting at work, phone automatically goes onto silent and mutles all sounds.
Scenario 2: calendar says at work, phone goes onto vibrate or lowest audiable level of sound and disable key tones.
Scenario 3: calendar says nothing, phone goes onto loud ring with full keytones.
These could be setup for outdoor pursuits, dates, and maybe even a bed time setting.
When i owned a BB bold, you could place your phone into the dock and it would automatically turn off all sounds etc, could this be done based on just the time of the day.
Obviously not everyone uses their caeldar to log every part of their life in great detail, but it would even work for those who DO put things like meeting into their calendar, to save the embarrassment of having your phone go off mid-meeting.
Im sure that some of this could be done using tasker, but for those who find tasker a bit daunting, this could be ideal!
Thanks Guys
Hello,
I use my Evo everyday for work. I rely heavily on Google Maps, what always bothers me is that I operate in two different modes during the day. When I am driving I like to turn off all distractions.
One mode where I have:
-Orientation set to Lock portrait
-Auto Sync set to On
-Text Messages auto receive on
-GPS Off
Then when I drive I usually spend a couple minutes changing it to:
-Orientation set to Lock landscape
-Auto Sync set to off (disables K-9 mail sync)
-Text Messages auto receive off
-GPS on
Is there a way to create a application or script that I can easily run to switch back and forth between these manual modes? Thank you,
Have you tried Tasker? There's a free 7 day trial on the Tasker website, you can try it out and see if you can get it set up to do what you're wanting. After the 7 days you'll have to purchase it, I think it's $6-$7. There are free alternatives to it that may do what you need as well, like Settings Profile Lite and Llama. I've never used the free ones, and I only tried Tasker for the trial period because I didn't really have a use for it. There's a bit of a learning curve, so you may want to read some tutorials on it.
Sent from my PC36100 using Tapatalk
Great I will take a look at Tasker. I wonder if anyone else has had a similar need. Thank you for your reply.
Yep. Tasker is what you want.
For instance, my in-car setup is:
When connected to power AND AUX audio cable are plugged in:
Media volume 15
Silent Mode OFF
Bluetooth ON
Set secondary profile to auto-reply to sms messages
Turn off button LEDs
Display brightness 30 if after 7:35pm OR 255 if before 7:35pm
Load app Car Home
When power or headphones are unplugged, it reverts back to the way it was set before it ran the profile. It's really cool.
I have a few other profiles setup too. Mostly to put the phone in silent mode when I'm at work, or flash the battery % on the screen at unlock when its below a certain point.
Fun stuff to play around with, having root lets you use a lot more of the features.
Yes tasker is the app for me. Heres to Safe Driving! Thank you,
I'd like to somehow configure it so that the phone will ring when my wife calls even if I have the phone on silent (if I'm sleeping away from home and there's an emergency).
Any way to do this?
Thanks.
Set a silent ring tone for all of your contacts except her
Try RingMaster from the Market...
My go to tool for these kinds of things is always Tasker, very versatile.
Download a Silent ringtone with the Zedge app and set it as you phone ringtone. Set a normal ringtone for anyone you want to hear.
I use setting profiles to create a night/sleep profile that keeps the phone quiet, unless someone in my family group calls.
I have this set on a time schedule that depends on the day.
Does lots if cool stuff like silence your phone during meetings, lower volumes during work etc... its a little easier to use than tasker IMHO.
I haven't tested yet but Llama has this function called Noisy Contact which allows you to set a different ring volume to some contacts while the phone itself keeps the original volume setting.
Just search market for llama
Sent from my Galaxy Nexus using XDA App
tauruslei said:
I haven't tested yet but Llama has this function called Noisy Contact which allows you to set a different ring volume to some contacts while the phone itself keeps the original volume setting.
Just search market for llama
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
+1
Llama is fantastic. My phone goes silent at night, but if my wife calls it will ring.
Sent from my Galaxy Nexus using Tapatalk
Yeah llama can do a lot more than just profile managing. If set properly it could potentially boost your battery life a little. I ask it to turn off wifi and sync at night if I'm home, which is kinda nice.
I would love to see NFC implementation tho
Sent from my Galaxy Nexus using XDA App
try autoring in market
select enable and auto enable when silent and put yr wife's contact under the white list and vola!
you may need to apply force ring too
gabster21 said:
My go to tool for these kinds of things is always Tasker, very versatile.
Click to expand...
Click to collapse
+1
I like doing this with Tasker and allmost every thing I need with this program.. I personally like not have many different app. installed just to take care of 1 thing each..
Therefor I like Tasker that much.. since this one program can save me for installing a ton of apps.. and its rock solid !!!
offroadr35 said:
I'd like to somehow configure it so that the phone will ring when my wife calls even if I have the phone on silent (if I'm sleeping away from home and there's an emergency).
Any way to do this?
Thanks.
Click to expand...
Click to collapse
Try Selective Silence
You could do it also with Xposed and Xblast Tools. Use Quiet Hours for all day and whitelist your one contact. You could even set how many times she or he can get through while those hours are active
Has anyone else noticed volume settings are even worse then they were for ICS? Not only are ringer + notification volumes still linked, Google even linked the system volume to them now as well. And more annoying: how on earth does one disable vibrate for notifications? The only setting to control vibrate I seem to have is "vibrate when ringing" in the sound menu. Unchecking this one does nothing for notifications.
I use Audiomanager Pro for my sound profiles, and the vibrate options you can set for each profile have no effect. The only way to disable vibrate seems to be to enable silent mode. But I don't want that, when I'm at home my GNEX lies on my desk in the room and I simply do not want it to vibrate for ringer & notifications.
Or am I somehow overlooking something really obvious here?
It is a pain in the a$$ but I found a pretty cool solution. Might not be what you were looking for but "easy profiles" in the market will let you unlink all those. It has a 2 week full trial. You can even reinstall the trial again if you want. Plus it allows all kinds of triggers and rules etc. Almost like tasker ... except for notifications.
G-Nexus Sent
So, if you're looking to control the vibrations for each app, any application that supports notifications should have a setting inside it with semi-fine-grain controls for notifications. These controls will generally allow you to specify whether you want a sound or vibration notification, and when to initiate them. For example, in Gmail->settings->[your email]->vibrate & ringtone there is a setting called "vibrate" in which you can specify if you would always like a vibration, only while in silent mode, or never. Hopefully this answers your question.
pinke123 said:
So, if you're looking to control the vibrations for each app, any application that supports notifications should have a setting inside it with semi-fine-grain controls for notifications. These controls will generally allow you to specify whether you want a sound or vibration notification, and when to initiate them. For example, in Gmail->settings->[your email]->vibrate & ringtone there is a setting called "vibrate" in which you can specify if you would always like a vibration, only while in silent mode, or never. Hopefully this answers your question.
Click to expand...
Click to collapse
Thanks for the reply but it doesn't I'm afraid. I know you can control notification settings per app, but doing so for 10+ apps every time I want to temporarily disable notification vibrate sort of defeats the purpose. What I want is a Gingerbread like setting for vibrate for notifications: one setting to disable/enable vibrate for notifications that overrides individual app settings.
I'm beginning to think Google simply does not want to allow such settings any more, but I'm surprised not more users are annoyed by this. Linking volumes was a bad call, but removing control regarding vibrate settings is an even worse one imho.
Petrovski80 said:
Thanks for the reply but it doesn't I'm afraid. I know you can control notification settings per app, but doing so for 10+ apps every time I want to temporarily disable notification vibrate sort of defeats the purpose. What I want is a Gingerbread like setting for vibrate for notifications: one setting to disable/enable vibrate for notifications that overrides individual app settings.
I'm beginning to think Google simply does not want to allow such settings any more, but I'm surprised not more users are annoyed by this. Linking volumes was a bad call, but removing control regarding vibrate settings is an even worse one imho.
Click to expand...
Click to collapse
I just updated my Nexus S to Jelly Bean and was very sad to discover this problem. Previously, I could use Audio Manager Pro to control whether notifications vibrated or not (both with volume on and off). Now, Audio Manager Pro's vibration settings seem to do nothing. I have to go into the individual app's notification settings to choose whether it vibrates or not. As you said, with multiple apps, this is unacceptable.
I emailed the Audio Manager dev to point this flaw out. I'm not sure if it is an unfixable Jelly Bean deficiency or if the Audio Manager app just needs to be updated. But I surely hope it is the latter and not the former.
I have to hand it to RIM... one thing they had right was notifications profiles built into the OS that were vastly superior to anything I've seen on Android or iOS. And the notification LED. It still blows my mind that more Android devices don't have a bright, visible notification LED.
chrikenn said:
I just updated my Nexus S to Jelly Bean and was very sad to discover this problem. Previously, I could use Audio Manager Pro to control whether notifications vibrated or not (both with volume on and off). Now, Audio Manager Pro's vibration settings seem to do nothing. I have to go into the individual app's notification settings to choose whether it vibrates or not. As you said, with multiple apps, this is unacceptable.
I emailed the Audio Manager dev to point this flaw out. I'm not sure if it is an unfixable Jelly Bean deficiency or if the Audio Manager app just needs to be updated. But I surely hope it is the latter and not the former.
I have to hand it to RIM... one thing they had right was notifications profiles built into the OS that were vastly superior to anything I've seen on Android or iOS. And the notification LED. It still blows my mind that more Android devices don't have a bright, visible notification LED.
Click to expand...
Click to collapse
Yes I totally agree regarding the profiles you can set on BlackBerry devices. I also emailed the dev of audiomanager, hopefully the jelly bean API still allows more control over vibrate than the Android settings menu suggests.
Sent from my Galaxy Nexus using Tapatalk 2
AUGH I just clued into this tonight after weeks on JB. I can't find any way to globally disable all vibrations at night. What the hell was Google thinking? Now I might have to put the damn thing on airplane mode just to get some freaking sleep.
Yeah it looks like we need need to live with this or flash a ROM that has modified sound/vibration settings to a normally usable level (read: the Gingerbread implementation).
Sent from my Galaxy Nexus using Tapatalk 2
For now, my compromise is to set Tasker to disable account sync when the phone is both face down and plugged in. Since Gmail is the most common source of vibration, it should do the trick. In the morning when I flipped it over and woke it, my e-mails came in about 5 seconds.
cmstlist said:
For now, my compromise is to set Tasker to disable account sync when the phone is both face down and plugged in. Since Gmail is the most common source of vibration, it should do the trick. In the morning when I flipped it over and woke it, my e-mails came in about 5 seconds.
Click to expand...
Click to collapse
Wtf was Google thinking? First linking ringer and notification volumes. Now making it near impossible to control vibration globally with a profiles app.
Google is really moving backwards in this area and I can think of no reasonable explanation as to why.
Sent from my Nexus S using xda app-developers app
chrikenn said:
Wtf was Google thinking? First linking ringer and notification volumes. Now making it near impossible to control vibration globally with a profiles app.
Google is really moving backwards in this area and I can think of no reasonable explanation as to why.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
Exactly. It's a mystery what problem the Google devs think they needed to fix. Gingerbread handled volumes and vibration just fine. Don't fix what isn't broken.
Sent from my Galaxy Nexus using Tapatalk 2
chrikenn said:
Wtf was Google thinking? First linking ringer and notification volumes. Now making it near impossible to control vibration globally with a profiles app.
Google is really moving backwards in this area and I can think of no reasonable explanation as to why.
Click to expand...
Click to collapse
They were asked about this at Google I/O, supposedly it was too confusing for some users. They basically avoided a response when it was brought up how it is now impossible to set, for example, navigation and music to both have comfortable volumes at the same time. It's like they know it sucks but they still won't fix it, it kind of pissed me off when I was watching it.
pfmiller said:
They were asked about this at Google I/O, supposedly it was too confusing for some users. They basically avoided a response when it was brought up how it is now impossible to set, for example, navigation and music to both have comfortable volumes at the same time. It's like they know it sucks but they still won't fix it, it kind of pissed me off when I was watching it.
Click to expand...
Click to collapse
Would it be possible for a custom ROM, say AOKP or CM10, to revert the vibration and volume behaviours back to being more like they were in GB?
pfmiller said:
They were asked about this at Google I/O, supposedly it was too confusing for some users. They basically avoided a response when it was brought up how it is now impossible to set, for example, navigation and music to both have comfortable volumes at the same time. It's like they know it sucks but they still won't fix it, it kind of pissed me off when I was watching it.
Click to expand...
Click to collapse
Oh I somehow missed that. Bad argumentation imho. If you can understand how 3 volume sliders (ICS/JB) work, you don't suddenly get confused if there are 5 sliders (GB). All this does is annoy people who want to control individual volumes. Restricting them by linking is *not* a usability improvement because it's less confusing.
"Three sliders? Ok, I got it". "Five sliders? ZOMG I'm confused!"
Google should have made it at least possible to unlink in 'advanced settings' or something. Heck I'd be happy to edit a bulky.config file if that would unlink.
cmstlist said:
Would it be possible for a custom ROM, say AOKP or CM10, to revert the vibration and volume behaviours back to being more like they were in GB?
Click to expand...
Click to collapse
AOKP and CM have the volumes unlinked, according to the specs and users on XDA. I'm guessing it's also possible to get the 'old' vibration behavior back as well. However I'm very happy with vanilla android, and flashing a custom rom just to get this one issue fixed always seemed overkill to me. But as soon as CM10 gets in a more stable state, I just might flash it.
turn off vibrate alerts in Jellybean - I fixed it
dunno how I missed something so simple but I service provider was able to help me fix the problem of the vibrate settings being on for all alerts and ringtones. for the ringtone, its in advanced settings and you can uncheck vibrate there. for the other apps, you have to go into the settings via the app not via the phone settings>apps and do it for each app, so for example, I use go chat for text messages, so I had to go into the app itself and then go to its settings and then turn off vibrate, same for email and facebook. and it worked, its fixed.
Yeah but that's still useless for those of us who just want to toggle all vibration at once, especially with an automated program like Tasker.
Sent from my HUAWEI MediaPad using Tapatalk 2
cmstlist said:
Yeah but that's still useless for those of us who just want to toggle all vibration at once, especially with an automated program like Tasker.
Sent from my HUAWEI MediaPad using Tapatalk 2
Click to expand...
Click to collapse
Have you tried Sound Manager from the market? It allows you to set vibrate for all notifications via the advanced menu.
I have to be honest that I only tried this in cm10 and in stock ics. I expect it to work in stock jb too.
Mr_Q said:
Have you tried Sound Manager from the market? It allows you to set vibrate for all notifications via the advanced menu.
I have to be honest that I only tried this in cm10 and in stock ics. I expect it to work in stock jb too.
Click to expand...
Click to collapse
No it does not work in stock JB. CM10 must have put back what Google got rid of. There is no more global vibrate toggle in stock JB.
I'm a little late on this one...
- slide down the "notification bar" from the top
- 3rd icon from the left ("speaker")
- this button has three states (ringtone / no ringtone + vibration / no ringtone + no vibration)
// EDIT
another option:
- keep the power button pressed
- select one of the above mentioned sound options at the bottom
regards,
schemo
schemogroby said:
I'm a little late on this one...
- slide down the "notification bar" from the top
- 3rd icon from the left ("speaker")
- this button has three states (ringtone / no ringtone + vibration / no ringtone + no vibration)
// EDIT
another option:
- keep the power button pressed
- select one of the above mentioned sound options at the bottom
regards,
schemo
Click to expand...
Click to collapse
Sorry what you're describing has nothing to do with the feature Google removed. This is about the ability to globally disable vibration, independently from sound. None of the options you listed include "sound on, vibrate off".
Sent from my Galaxy Nexus using Tapatalk 2
So I've just received my HTC 10. Got it as a gift and it's an upgrade from my Galaxy S6. There is a lot to like, but I've found some very annoying things that I seem unable to solve. Like not being able to edit the Quick Settings and the reason for opening this thread: no way of turning off sound AND vibration while using a an Android Wear watch.
On my S6 I was able to simply turn down the volume until it went to vibrate and then press volume down again. That way the phone was entirely silent and only my watch would vibrate. Not so with the 10. It'll either vibrate or it goes to Do-Not-Disturb mode meaning my watch doesn't vibrate anymore either.
It's extremely annoying as I'm often in meetings with my phone on the table in silent mode. That way I get notifications on my wrist while the phone is silent. Now I'm forced to put everything to silent and miss calls and messages as a result. It totally defeats the purpose of having the watch for notifications.
As I got the phone from HTC I wanted to hold off from rooting it, but it looks like it's either that or going back to the S6. Am I doing something something wrong/not finding the right settings or did HTC just forget?
Thanks in advance for your reply!
Thijsvr said:
So I've just received my HTC 10. Got it as a gift and it's an upgrade from my Galaxy S6. There is a lot to like, but I've found some very annoying things that I seem unable to solve. Like not being able to edit the Quick Settings and the reason for opening this thread: no way of turning off sound AND vibration while using a an Android Wear watch.
On my S6 I was able to simply turn down the volume until it went to vibrate and then press volume down again. That way the phone was entirely silent and only my watch would vibrate. Not so with the 10. It'll either vibrate or it goes to Do-Not-Disturb mode meaning my watch doesn't vibrate anymore either.
It's extremely annoying as I'm often in meetings with my phone on the table in silent mode. That way I get notifications on my wrist while the phone is silent. Now I'm forced to put everything to silent and miss calls and messages as a result. It totally defeats the purpose of having the watch for notifications.
As I got the phone from HTC I wanted to hold off from rooting it, but it looks like it's either that or going back to the S6. Am I doing something something wrong/not finding the right settings or did HTC just forget?
Thanks in advance for your reply!
Click to expand...
Click to collapse
Yeah, this is weird from HTC. On previous devices the silent setting would work exactly like the Galaxy S6 one. It's strange that in the 10 it goes straight to DND mode.
As a workaround, if you don't want to root, you can tweak DND Mode to allow every notification through and get it on the smartwatch as well. This is not ideal, especially if you want to use DND mode for what it's meant...
VictorC said:
Yeah, this is weird from HTC. On previous devices the silent setting would work exactly like the Galaxy S6 one. It's strange that in the 10 it goes straight to DND mode.
As a workaround, if you don't want to root, you can tweak DND Mode to allow every notification through and get it on the smartwatch as well. This is not ideal, especially if you want to use DND mode for what it's meant...
Click to expand...
Click to collapse
Thanks
Unfortunately I also use DND often so this is not an ideal solution, but it'll have to do for now
HTC uses the same idea as Nexus device now, since HTC A9, which means the sound profile has only : normal, vibrate, and DND, no silent mode anymore; and the notification panel also followed Nexus, but don't worry, in Android N you can change quick settings in notification panel, just need to wait for 5 months.
Also, you can set up some apps, treat them as priority, so that they may go through. I don't use smart watch so I could be wrong. But this is just a problem about habit, once you get used to it, everything's fine.
Thijsvr said:
..this is not an ideal solution, but it'll have to do for now
Click to expand...
Click to collapse
What about such not an ideal solution as setting ringtone Silent.. hmm.. ??
Sent from quite brutal hTc 10 ..
jauhien said:
What about such not an ideal solution as setting ringtone Silent.. hmm.. ??
Sent from quite brutal hTc 10 ..
Click to expand...
Click to collapse
The phone also vibrates on messages and emails. There are multiple work arounds, but none as quick as just turning down the volume and have your phone be silent. I don't want to dive into settings everytime I walk into a meeting.
Thijsvr said:
The phone also vibrates on messages and emails. There are multiple work arounds, but none as quick as just turning down the volume and have your phone be silent. I don't want to dive into settings everytime I walk into a meeting.
Click to expand...
Click to collapse
you don't need to dive into the settings,
1: drag down the quick settings and tap on DND, only 2 steps;
2: press and hold volume down button, when switched to vibrates mode, tap on the bell icon, also only 2 steps.
Alpert3 said:
you don't need to dive into the settings,
1: drag down the quick settings and tap on DND, only 2 steps;
2: press and hold volume down button, when switched to vibrates mode, tap on the bell icon, also only 2 steps.
Click to expand...
Click to collapse
I meant to do the settings where you change the priority mode settings each time you want the phone to be silent, but don't want DND on etc.