I've seen that Huawei Ascend Mate 2 can charge other phones thorugh a compatible cable. Can I find such a cable for my Samsung smartphone?
Thanks.
CooLasFcuK said:
I've seen that Huawei Ascend Mate 2 can charge other phones thorugh a compatible cable. Can I find such a cable for my Samsung smartphone?
Thanks.
Click to expand...
Click to collapse
You should be able to use any USB cable that has micro USB tips on both ends. Look for a male-to-male micro USB cable.
Not any cable, you need to get USB OTG cable, cost a few dollars on ebay or Amazon. It has micro-usb connector on one side (which goes to your phone) and full size female usb connector on the other side to connect any device (usb stick, mouse, keyboard, ext hard drive). Just make sure your phone supports USB OTG. Typically all the latest Galaxy phones should. That cable, usb on-the-go (OTG) has two pins shorted inside and turns your phone into a host so you can connect other peripheral devices, such as the one I listed above. And while it does that, it provides 5V power through USB bus like any usb host (your laptop or PC). As a result, you can charge other phones or devices from your smartphone. Just keep in mind, it will drain your battery
This is very useful, for example, if you have Note 2 with 9600 mAh Zerolemon extended battery (in my case), and use your phone to charge other devices with extra juice
Related
The most Micro USB to USB converters are not work if you want to use it for OTG converter, because the 4. pin of the micro usb plug is not connected!
The most ebay and computer shop's converters like this!
If you want to use it for working OTG adapter you have to connect the micro usb connector 4. pin to GND (5. pin).
Like this:
I made this mod on my adapter and it works!
First you have to open up the outter cover and carve the plastic around the micro usb pins. You can use multimeter to check the pinout.
After that solder the 4. pin to 5. pin with a piece of wire.
And finally glue back the outter cover.
Video:
So if you have not working adapter you can mod it, if you have suffice experience with electronic and proper tools.
Only do with your own risk!
I have this Usb converter!
With your mod works perfectly!!
just tried it it works perf, thank you!
Weird I got one off eBay from Hong Kong and it works without Modding. Can open files off a USB stick. Got it for £1
Sent from my GT-I9100 using XDA Premium App
Anyone knows how the Galaxy determines to be in home or car dock?
ALexander
hi thanks for great find just built one from a female usb cable vey nice.
WOrked for me too...thanks
skibadee said:
Weird I got one off eBay from Hong Kong and it works without Modding. Can open files off a USB stick. Got it for £1
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Share the link please
I buy a pair in Dealextreme.com
SKU 50774 o search OTG
It may have a resistor between pin 4 and 5, kind of like a jig,
I remember there was a fun with resistors thread for the sgs1.
I may attack tge free dock I,got from optus.
Sent from my GT-I9100 using XDA App
Vairn said:
It may have a resistor between pin 4 and 5, kind of like a jig,
Click to expand...
Click to collapse
OTG has no resistor, its direct connect to GND.
i bought this one from ebay
(cant post links )
item number 260782021641
and it works with usb drives and i used a mouse in it too
OTG Cable USB (B) to Micro USB (A) Powered with AAA batteries ?
As one knows, Samsung has promised a MHL Cable
You noticed it is not only a cable but a box out of which you may plug in an extra power supply.
The obvious reason is if the passive monitor does not furnish 5V, the phone will rapidly be out of power.
Now you know that to obtain video rather than anything less, Pin 4 (sense) and 5 (Ground) of micro USB (male A) must be connected with a 365K resistance.
I suppose the dock Samsung is selling for I9100 (yes, I have it) is grounded at 1000K as it provides audio with remote, and yes, the dock provides power supply via extra micro USB as well.
I come to my point: If I want to access any USB data On the Go, I need a cable OTG with 2 ports: USB 2.0/3.0 (female, B sided) to a micro USB (male, A sided, grounded but with no resistance = 0K). Many of them exist on the market out there.
But it is quite impossible to use because of lack of power supply in the passive device (let’s say a handy 1T HDD usually powered via Host connexion !
Would it be possible to insert some sort of receptacle for AAA battery in the middle of such a cable to provide for power while you are for a long time out of access to an electric plug ? Does such a cable exist somewhere to buy ? What would be the sheme to mount this ? HELP !
Is it possible to add USB charging cable to USB-host cable? I want to use mouse\keyboard\flash and charge device in the same time.
I also interested how to add power to USB-host cable for devices "High-power device connected".
OTG and Power
thats excactly my question:
is it possible to use otg cable with a trackball or mouse and at same time charge the S2?
give power to usb mouse and charge S2 over a charger!?
Is it possible to use a game controller over usb otg? Would be pretty nice.
Wanna have a S2Play ;-)
anonymous572 said:
Is it possible to add USB charging cable to USB-host cable? I want to use mouse\keyboard\flash and charge device in the same time.
I also interested how to add power to USB-host cable for devices "High-power device connected".
Click to expand...
Click to collapse
it is not possible. usb host can be used one way not two ways.
Sent from my GT-I9100
i do have same problem..is there any suggestions to make sgs2 can read the high-power USB flashdisk via otg??
An USB hub with external power maybe ? I didn't tried this kind of setup, but it should work. I have a hub, but I don't have a OTG cable yet.
blueseeker said:
An USB hub with external power maybe ? I didn't tried this kind of setup, but it should work. I have a hub, but I don't have a OTG cable yet.
Click to expand...
Click to collapse
I've been try this, but still doesn't work for me..I'm also used electrical multi-tester, and the usb flash already has 5V voltage but in my sgs2 still nothing happen (my usb flashdisk doesn't mounted to sgs2)..
Is there any driver/apps do I need to install first before using OTG?? or, is there two kind of sgs2, the one which support OTG and the other one not??
please someone help me...One point I choose this SGS2 is the OTG feature..
PS: sorry for my english
I've already ordered the Mine Keyboard and the Adapter to later know that atrix uses a micro USB...
this is the adapter:
http://produto.mercadolivre.com.br/...-conversor-usb-a-fmea-para-mini-usb-macho-_JM
Sure it doesnt fit in atrix. but.. if i buy this?
http://produto.mercadolivre.com.br/...-para-micro-usb-motorola-moto-q11-cpmt018-_JM
and then convert micro to mini then mini to usb normal? would i be able to plug a keyboard? Thanks
or even buy this new one?
http://produto.mercadolivre.com.br/MLB-195555339-conversor-usb-femea-para-micro-usb-_JM
Lordareon said:
I've already ordered the Mine Keyboard and the Adapter to later know that atrix uses a micro USB...
this is the adapter:
http://produto.mercadolivre.com.br/...-conversor-usb-a-fmea-para-mini-usb-macho-_JM
Sure it doesnt fit in atrix. but.. if i buy this?
http://produto.mercadolivre.com.br/...-para-micro-usb-motorola-moto-q11-cpmt018-_JM
and then convert micro to mini then mini to usb normal? would i be able to plug a keyboard? Thanks
or even buy this new one?
http://produto.mercadolivre.com.br/MLB-195555339-conversor-usb-femea-para-micro-usb-_JM
Click to expand...
Click to collapse
you will not be able to plug in a USB peripheral (mouse, keyboard) directly into the phone. it will not work.
you can, however, purchase a +5V powered USB hub (that plugs into the wall), and use that to plug into the phone and plug your KB/mouse into the hub, and it should work. you can find such hubs at www.dealextreme.com
to further answer your question, USB-___USB converters will work as long as the converters have all four lines hooked up. many converters are 'power-only' where only the power/ground lines are connected and the other two lines (data) are not.
So if i buy an ordinary pc hub that connects to power and the plug usb-to-microusb, it will work?
Well let it alone, ill buy a Bluetooth keyboard, will spare time and cables and converters ahahha
The Micro USB plug must be OTG (USB ON THE GO) or your phone won't recognize the peripheral. Also the advice given was correct, the phone USB port can't provide power to a peripheral device and so you must use a powered hub in between the phone and the peripheral device.
A USB OTG has pin 5 and pin 4 tied together in the Micro USB connector end to tell the phone to invoke OTG mode.
Lordareon: yea... if you'd go the wired route, you'd need a powered USB hub, since the Atrix's micro-USB port doesn't work as a host port. It doesn't provide power to external devices.
elementaldragon said:
Lordareon: yea... if you'd go the wired route, you'd need a powered USB hub, since the Atrix's micro-USB port doesn't work as a host port. It doesn't provide power to external devices.
Click to expand...
Click to collapse
already been stated twice.
I I am looking to put a little charging station in the storage compartment of my home theater sectional. I really would like to only run one USB cable to charge my devices. I am a bit worried I will not be buying the correct pieces for my needs. I bought a 16ft. pluggable USB cord on Amazon recently, but there seem to be worries that a single USB cable may not provide more than 2.1a.
I would like to charge at least two smartphones (HTC One X and Note 2) at once and at their full charging rate. Assuming that this is even possible, could someone provide me with a wall adapter and USB hub that will work for this? I like the looks of...
PowerGen Dual USB 3.1A 15w Travel Wall Charger
and
AmazonBasics USB 2.0 4-Port Ultra Mini Hub
(I can't post links yet).
If this is an impossible task, what are some other good options? I looked at the Belkin Valet, but it appears too large, and has some issues.
Well a note 2 alone takes more than a standard usb 2.0 cord to charge at full speed. Maybe try a usb 3.0 hub and tablet wall charger. Not 100% sure its possible though
mrevankyle said:
Well a note 2 alone takes more than a standard usb 2.0 cord to charge at full speed. Maybe try a usb 3.0 hub and tablet wall charger. Not 100% sure its possible though
Click to expand...
Click to collapse
Okay, that makes it sound like I might want to change my mind about this whole one USB cord plan. How about running an extension cord instead of a USB cord, then hooking it up to a dual USB wall charger like this-
Kensington AbsolutePower Dual 2.1A USB Wall Charger (Amazon)
Would that work for two Note 2s?
If it can charge 2 ipads then it can charge 2 note ii's
Title says it all, has anyone tried this?
From what I've read (and the other threads on this topic) - no it can't be done.
It can't be done my friend
I got it to work
psycho1200 said:
It can't be done my friend
Click to expand...
Click to collapse
I used the following and plugged into my TV usb port and had ethernet (verfied with WIFI shut off) and it was charging.
USB 2.0 Ethernet adapter - <amazon.com/gp/product/B003VSTDFG>
OTG with power - <amazon.com/gp/product/B00C452XFO/>
Yup, this now works great for me too! :good:
I bought the Ethernet adapter Nvidia Recommends (same as browncoatdave's)
http://www.amazon.com/Plugable-Gigabit-Ethernet-Chromebook-Specific/dp/B003VSTDFG
And just whatever Y cable could find that didn't look uber cheap.
http://smile.amazon.com/gp/product/B00CXAC1ZW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
What I have plugged into the shield
jjprichards said:
Title says it all, has anyone tried this?
Click to expand...
Click to collapse
1) 3 Port USB Hub
2) Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter
3) Micro USB Host OTG Cable with Micro USB Power
4) Smart Touch Mini USB TouchPad Keyboard
5) Full Size trackball mouse
6) Charging cord
I am charging the battery with ethernet, keyboard and mouse plugged in.
No Problem. But this is also after the kitkat update which added the charging while ethernet is plugged in.
solidsn said:
1) 3 Port USB Hub
2) Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter
3) Micro USB Host OTG Cable with Micro USB Power
4) Smart Touch Mini USB TouchPad Keyboard
5) Full Size trackball mouse
6) Charging cord
I am charging the battery with ethernet, keyboard and mouse plugged in.
No Problem. But this is also after the kitkat update which added the charging while ethernet is plugged in.
Click to expand...
Click to collapse
trackball mouse, why? gives me flashbacks of the 90s...
solidsn said:
1) 3 Port USB Hub
2) Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter
3) Micro USB Host OTG Cable with Micro USB Power
4) Smart Touch Mini USB TouchPad Keyboard
5) Full Size trackball mouse
6) Charging cord
I am charging the battery with ethernet, keyboard and mouse plugged in.
No Problem. But this is also after the kitkat update which added the charging while ethernet is plugged in.
Click to expand...
Click to collapse
Did you plug all the devices in a particular order? I noticed that if I plug in my charger AFTER I plug in the OTG cable into the shield, then it is not charging. But when I plug in the charger into the OTG cable and then plug it into shield, it is charging.
Is your hub powered? What exact model is it? I am asking because I have very similar setup to yours but the shield does not detect USB devices connected to the hub - it's this one: http: // esperanza . pl/esperanza-usb-2-0-hub-4-porty-ea116,182,437.html
I can connect one usb device directly to OTG cable and it works, but when I connect a hub, it no longer works.
There is a cheap way to do this if you have the soldering skills, and are willing to try it.
Get a cheap USB "Travel" hub.
Open it up, and replace the Upstream USB cable with an OTG cable (A scrap Micro-USB cable may or may not work. The connector must be Properly wired for OTG).
Remove the main power diode in the USB hub, and solder jumper the 2 pads where it was. A Multimeter in continuity mode can help you find the right component, but it takes some experience. There usually is not much in a cheap travel hub, so I can usually find them just by looking, but like I say, only try this if you have the experience, and you know what you are looking for.
Power the hub through it's 5V power jack (if it has one), or you can add a power only micro-USB socket. (Only connect the (+) and (-) power pins, do not connect the data lines. Connect it to any one of the Full size USB port's power pins. Observe polarity.)
Voila! You now have 4 Full size USB ports, it will charge your device, and provide power (Up to the rated power of the AC adapter) for your USB devices.
I did this years ago in the Nokia 770 days. It was one of the first consumer devices that supported USB OTG. Article still exists here:
http://www.linuxslate.org/N770DockingStation.html (Scroll down to the "Electronic Components" Section)
Would this work?
Would this: SODIAL(R) Micro USB Host OTG Cable with Micro USB Power plus this: Anker® Unibody 3-Port USB 3.0 and Ethernet Hub
Give me the ability to charge tablet, use Ethernet and additionally connect USB mouse and keyboard, and possibly charge Nvidia Game Controller?
Or would it just be a waste of time and money
Unfortunately, I just wasted over $30 on a Valarm IoT OTG Y cable. It does not work at all as a host cable for any USB device on the G4. I was hoping to use the Valarm cable to connect a USB DAC and charge the phone at the same time. The cable will let me charge the phone but whatever I connected to the USB female port is not recognized. If anyone finds a USB host cable that allows charging, please post!
mattnin said:
Unfortunately, I just wasted over $30 on a Valarm IoT OTG Y cable. It does not work at all as a host cable for any USB device on the G4. I was hoping to use the Valarm cable to connect a USB DAC and charge the phone at the same time. The cable will let me charge the phone but whatever I connected to the USB female port is not recognized. If anyone finds a USB host cable that allows charging, please post!
Click to expand...
Click to collapse
From what i understand otg goes one way or the other it cant act as a host and carge at the same time. It flips the charging circut to flow out instead of in. Ive been through this on a few phones tried even straight wiring a powerline to the otg itll power the usb device but not charge the phone.
TheMadScientist420 said:
From what i understand otg goes one way or the other it cant act as a host and carge at the same time. It flips the charging circut to flow out instead of in. Ive been through this on a few phones tried even straight wiring a powerline to the otg itll power the usb device but not charge the phone.
Click to expand...
Click to collapse
The manufacturer of that cable clearly states that it'll charge a samsung phone, not confirmed working on a G4 though. Here is the link, http://shop.valarm.net/products/micro-usb-host-otg-y-cable-with-micro-usb-power-for-samsung
I wish there was a way to enable charging using OTG.
mattnin said:
The manufacturer of that cable clearly states that it'll charge a samsung phone, not confirmed working on a G4 though. Here is the link, http://shop.valarm.net/products/micro-usb-host-otg-y-cable-with-micro-usb-power-for-samsung
I wish there was a way to enable charging using OTG.
Click to expand...
Click to collapse
Yea me to i have a few devices that hook to my car that drain my tablet and phone batts and it kills me the only other way ive got it to work is hard wire a charger to the phone. But of coarse this is a old throw away gs3 that im talkin bout not my g4. I havnt tried on my g4 yet but its all phone specs has to have dual charging circuts cause they can only flow one at a time. Now some new devices i know. Do support otg with charging capabilities.