[Q] Factory Reset Note II with Broken Digitizer - Galaxy Note II Q&A, Help & Troubleshooting

I broke the digitizer on my note 2, completely destroying any chance of ever being able to view the screen again. Also, I never set up my note II in android device manager to be able to erase it. I bought a new phone, have no desire to put a new digitizer in this phone, and want to sell it. What are my options?

Samsung dive you tried?

Unfortunately I didn't set up Samsung Dive on my phone either.

You could flash your existing rom (if you know which one you had) through odin.
Only thing you have to do 'blind' is bring device in download mode (with device off...volume down/home/power...wait a bit...volume up....hook to your computer and odin suppose to say 'added').
If you don't know which rom was on it, search sammobile for the latest one and flash it as described...make sure it is a full wipe rom (otherwise your data will stay). I think the roms on sammobile that have the orange Kies symbol next to it are non wipe, the ones with grayed Kies symbol are full wipe, but don't shoot me for that
Another solution to be sure of a full wipe rom is to find a similar one here on the forums and ask in the specific thread.

The phone wasn't flashed...

For 'flashing' a rom through Odin your device would not have to be flashed in the first place.
Flashing in this case just means putting the original firmware back on it.
If you don't know which firmware was on your device give Sammobile a try to find the latest firmware.

Sorry, I meant the phone was never even rooted...
Sent from my Nexus 5 using xda app-developers app

In the following link at post 6 you can find emergency factory reset firmwares which also reset your SD card personal information etc. Unfortunately the links was at hotfile which is not working anymore, but I saw at same thread some users have uploaded them to other servers search the thread starting from last post to first and u will find the links. The thread has installation instructions via odin. After installing browse your SD card via pc at android/data to see if any data of your installed application exist, if not and are only the applications which coming with phone means that your phone reseted successfully
http://forum.xda-developers.com/showthread.php?t=1915386
For flashing via pc odin you have to go blind as nirak wrote to u earlier for entering at download mode. Follow his instructions to enter download mode and after the instructions of the thread I gave u. Also u have to install first Samsung kies software for the drivers and after to enter at task manager at your pc and terminate all the processes of kies, 4 processes if I remember well because kies don't allows to flash via odin. You need it only for the drivers.
Sent from my GT-N7100 using Tapatalk

Related

[Q] galaxy note 8 factory restore

Hi guys. Im a noob, first post here and need some help. Be searching all day for how to load a stock rom to my device GT-N5110.
Heres the low down.
Purchased in Australia. No updates applied.
Success rooted with framaroot.Was running framaroot for more than a month
Install busy box today in normal mode I think. I chose the safe option.
Edited build.prop product model so I could install Navigon
Navigon working fine
Now..........
Unable to change the product name back using es explorer or file expert.
Thought it would change after restart but device entered bootloop. I think busybox was the culprit.
Discovered recovery mode and did factory data reset. Can acces odin screen on device too.
Device boots but hangs on language selection screen
I have found and downloaded stock rom for it that I found here somehow
I tried "Mrjraider" tutorial "how to flash back to a stock rom"
but odin crashes whenever I load the rom file and it wont recognize my GN8.0
Computer runs on windows 8. Kies is up to date too. Kies reconizes device but is unable to update or anything
Was running odin in win xp sp3 with administrator
can try on a win7 computer tomorrow.
This is the name of the file its about 1.2 Gb....... N5110UEDMD1_N5110XARDMD1_HOME.tar.md5 do I need to rename this or something
There was also a .dll that was in the package, wtf with that?????
be looking through this forum all day and night and cant quite find what im looking for. If what I seek is here please point me to it. Or if any one here in Brisbane, can fix it for me,What are your thoghts? PM me.
Just want my baby back working again.
Sorry, wrong section please delete mod
If I'm not mistaken, remove Kies, then try using Odin. Also, dll is a Windows file. I could be wrong about Kies, but I think I remember reading that it conflicts with Odin.
Sent from my SGH-T889 using Xparent Skyblue Tapatalk 2
Yesterday I installed same firmware in my computer runing win7 with Odin and Kies installed at the same time without problems. You don't need to rename the file, dll is a library for windows and needs to be on the same folder as the md5 file. Just remember to put the Note in download mode in order to get the firmware installed by Odin.
I have a thread in the development forum with the only file you need just flash in odin and done.
Sent from my GT-N5110 using Tapatalk 2
Tutorial is ok, problem seems to be elsewhere.
I have Windows 8 (x64) too, and Odin works i my case, i successfully flashed (and restored counter) N5110 before returning tablet to shop (it was exchange for N5100). Kill all Kies components via task manager, i have two more things in processes when i quit Kies. Next, try another version of Odin, but I remember one ROM from SamMobile, which crashed every Odin i had, so its may be this problem. Try another version of ROM - older, if exists. If crashes Odin too or not exists, try uninstall both Kies and Samsung USB driver, dowload toolkit from xda (http://forum.xda-developers.com/showthread.php?t=2251033) and install new driver via toolkit.
In rare cases may be problem in your computer, so try another one without installing Kies. I wish you luck.
Edit - That big file is ROM, dll is not needed for Odin. Run Odin, press PDA, select your rom. Turn tablet off, connect to comupter by original or hi-quality short cable, set tablet into download mode (hold vol- and home, press power on for 2 secs, select continue by pressing vol+). If all is ok, first field in Odin change color to yellow (i think), then press "Start".
Thanks to all. Let you know how I go. Odin 4.43 keeps crashing when loading the rom, on both my win8 laptop and fresh installed win 7 pc. Uninstalled everything from laptop except nero. Nothing installed on pc except modem drivers and Samsung drivers. I will redownload the rom. I think it may have become corrupt. Cheers
ok success. this is what I did. eventually got the rom to sit in odin without crashing it by simply renaming file by deleting the .tar.md5 extention. clicked off the file to save the rename. Right click on it again to rename and type the extension back in. Loaded it in odin and it worked. File name in odin showed up with duplicate file extention eg .tar.md5.tar.md5 but it worked. Odin 4.43 would not detect my device. Senior Moderator Mskip toolkit for Samsung galaxy note 8 would not detect my device .This was very frustrating
Used odin 3.07
loaded rom in pda. Found in janjannsen99 development thread.
connected device ,odin 3.07 detected it, unlike 4.43 for some reason.
clicked start.
Walla. Im a happy man.
This is the kind of story that are the most scary. Now I am kind afraid of root my note 8 or do anything unofficial.
Anyway, best wishes to you.
mickatron said:
Thanks to all. Let you know how I go. Odin 4.43 keeps crashing when loading the rom, on both my win8 laptop and fresh installed win 7 pc. Uninstalled everything from laptop except nero. Nothing installed on pc except modem drivers and Samsung drivers. I will redownload the rom. I think it may have become corrupt. Cheers
ok success. this is what I did. eventually got the rom to sit in odin without crashing it by simply renaming file by deleting the .tar.md5 extention. clicked off the file to save the rename. Right click on it again to rename and type the extension back in. Loaded it in odin and it worked. File name in odin showed up with duplicate file extention eg .tar.md5.tar.md5 but it worked. Odin 4.43 would not detect my device. Senior Moderator Mskip toolkit for Samsung galaxy note 8 would not detect my device .This was very frustrating
Used odin 3.07
loaded rom in pda. Found in janjannsen99 development thread.
connected device ,odin 3.07 detected it, unlike 4.43 for some reason.
clicked start.
Walla. Im a happy man.
Click to expand...
Click to collapse
That's what I use odin 3.07 . Don't use the other versions for some reason they don't work
Secondly guys when you download that file in my thread tO your computer it has to be extracted first you only Click PDA In ODIN and use the file you just extracted with the tar md5 extension. Thats it. That ss.dll file has no purpose its just there and you need not even bother with it.
Sent from my GT-N5110 using Tapatalk 2
I am also trying to restore my US-based Note 8.0 WIFI (still on 4.1.2), but couldn't figured out which ROM file I need to download.
Could you tell me the filename? I am using the Note 8.0 toolkit.
ROM
lanwarrior said:
I am also trying to restore my US-based Note 8.0 WIFI (still on 4.1.2), but couldn't figured out which ROM file I need to download.
Could you tell me the filename? I am using the Note 8.0 toolkit.
Click to expand...
Click to collapse
Will these two links help you:
Link 1
Link 2
AkiOrpheus said:
Will these two links help you:
Link 1
Link 2
Click to expand...
Click to collapse
I have checked that, but I don't see US Note 8.0. The search seems broken to, since United States is not shown in the list of country for Note 8.0
No one knows how to get the stock US based ROM?
lanwarrior said:
No one knows how to get the stock US based ROM?
Click to expand...
Click to collapse
@lanwarrior
U have to register on sammobile.com to download firmwares (stock ROM). Put the model as SGH-i467 and u will the file
AkiOrpheus said:
Will these two links help you:
Click to expand...
Click to collapse
people keep posting to go to sammobile but every time i look there isn't a rom labeled for the US, and they dont give an explanation of what rom would be the equivilant or even if any of them would be. Should I use UK version? is it the same as the US?
I'm having the same exact issue as OP and I can get into download mode and i have odin 3.07 but i am just looking for the exact rom to load and cant find an exact answer so far. I've already messed up my tablet enough today so I don't want to flash the wrong rom and make things worse lol.
K
O
F
ps I looked for janjansen's thread in development and did not see it, am I missing something? anyone got a link?
ok I did some more reading around the web and found that a lot of people used the UK version as I kinda suspected. Would have been nice to get confirmation on that but its cool, I flashed it, no problem, and now I'm setting up the chainfire root and getting back all my apps. So all in all it took a few days but I'm back on my feet *sigh of relief*
K
O
F

Wi-Fi Problem!

Hello, I have a Samsung Galaxy S3 T-Mobile version (SGH-T999). I had the official Android 4.0.4 version,I could not do the update to 4.3 version,so I only variant has to do root on the phone and snort with unroot install a 4.3 version,which I did. After installing I had the first boot and I had setup Google accounts, Dropbox accounts, etc. .. I did not do the setup, but I skipped because I was activated mobile data. When we had removed all the money that I had in the mobile card,I went in the settings and tried to enable Wi-Fi,but could not, constantly goes out. I do not know what the problem was but would gladly like to help me, because my phone never do true Wi-Fi. Thank you in advance!
Please do a Factory Reset and set up all over again.
I supplemented the money on the card,this morning at 9 am done factory reset. I tried to turn on Wi-Fi but the same as before the reset and,again, I turn on the mobile data and took my money from mobile cards. If it is to google accounts'll pay packages for internet and I'll set. If you need I will put pictures.
Can you please post the thread or instructions you followed to get 4.3 ? If Factory Reset didn't cure your issue, we need to look at how you did the update.
Make sure auto switch networks is turned off in settings. Did you try with the sim card removed?
Sent from my SM-N900T using Tapatalk
@ Perseus17 On the phone I did root through Odin3 program, entered into recovery mode and installed SuperUser phone was rooted. I downloaded the official 4.3 update for the appropriate model and unroot when I installed a 4.3. Unroot I've done over the application Triangle Away and Mobile Odin. If you want, I can explain in more details how I installed. Hello!
@ DocHoliday77 How do you turn off that? Whether we can send a picture or explain the steps on how to find it? Hello!
If you installed the Official 4.3 Release and then right now its not Rooted. Is this correct ?
Secondly, If I understand it correct, Right now, the phone will not connect to any Wireless networks. Especially those it was able to connect before the update ? Kindly confirm.
It is true that the phone is no longer rooted because when installing official Android version of the phone is no longer rooted. Phone before the update could go on any Wi-Fi network. After the update can not be either one,or more precisely, the Wi-Fi does not start.
Just for Kicks, can you flash the Insecure Kernel via custom Recovery such as CWM or TWRP ?
See the state of Wireless after reboot.
What I need to do?
Step 1 - You flash a Custom Recovery such as CWM or TWRP via Respective Apps Rom Manager or Goo Manager.
Step 2 - Download the insecure kernel I linked in my last post to your phone's SD Card. Reboot to the Recovery and flash that kernel Zip file.

SPH-L520 NJ1 update question

I have obtained a Sprint s4 mini. From what I can find, the current kernel is SE secure enforcing.
The exact build number is KOT49H.L520_4.4.2_0016
Build date is Oct 7 2014
I am not new here, I know that all known root methods are now bust. What other options are there?
Searching seems to be pretty difficult for this device. All searches for bootloader and recovery come up for the i9190 / i9195
If I use Kies or Odin to flash a previous recovery image, will that brick the device? Also in the settings, it says Secure Boot Status - Type: Samsung
Guess that is referring to the Knox enforcing
The particular image I had in mind to flash with Odin is SPR-L520VPUAMK2-20131115204826
Will it work? Or am I screwed?
Well no one was able to answer my question, so I had to figure it out on my own. Hopefully the following information will be of help to someone else without spending 36+ hours digging through the internet for answers.
You CAN fix your phone it you are on the NJ1 kernel. This is NOT a guide to fixing a bricked phone, although it may fix that too.
If you are on the NJ1 kernel, there are no root methods currently available. You MUST be on NE3 or lower. I also attempted to flash the custom recovery through Odin, but after a reboot it was as if I did nothing. No Knox flag, no warranty trip, no custom recovery.
Here is what I did to get custom recovery and root:
READ THIS BEFORE ATTEMPTING STEP 1.
This is only for the Sprint variant of the S4 Mini. Model number SPH-L520
Your Warranty could be voided. Proceed if you like. (More info on steps 5 and 6)
I had a horrible time getting the downloads from Sammobile. You WILL have to create an account and login to download files. I could not find any working links for the firmware below except for this site. Register a user name and password, DO NOT UNCHECK THE BOX that says receive emails from Sammobile OR YOU WILL NOT GET YOUR REGISTRATION EMAIL. On the Register page it is at the bottom. After you register, check your email and click on the link to complete the registration.
Close all your windows that are open to sammobile.
You are going to want to download Internet Download Manager in order to download files from Sammobile. After many many attempts to download the firmware from Sammobile, all tries failed. YOU ARE GOING TO NEED IDM to get a reliable download.
Download IDM ---> https://www.internetdownloadmanager.com/download.html
Install it and follow these directions to enable resume downloads in IDM ---> http://forum.xda-developers.com/showthread.php?t=2765456
If you do not do the steps above, you most likely will have failed download after failed download.
Even after setting this up, the firmware download failed on me twice. I deleted it from the download list in IDM and started it again.
IDM integrates well with Internet Explorer. Kinda buggy with Chrome. I would suggest using IE for the rest of this Tutorial.
Ok, now that you have that squared away, move on to step 1
_________________________________________________________________________________________________________________________
1) Flash your phone back to NE3. You can get that here ---> http://www.sammobile.com/firmwares/download/31482/L520VPUBNE3_L520SPTBNE3_SPR/ (click Regular Download, then on new page right-click Confirm Download and click SAVE AS. After that the IDM window should pop up. Just Start Download)
Also go ahead and download download the NJ1 in case things get rough. List of all firmwares here ---> http://www.sammobile.com/firmwares/database/SPH-L520/
2) Download and install the Samsung drivers ---> http://www.mediafire.com/download/a4hd8y0c1iakysk/Samsung-Usb-Driver-v1.5.49.0.exe
Download Odin 3.09 ---> http://androidhost.org/PVAIv
Unzip Odin to a folder or desktop. Do not run it from in the zip folder.
3) Run Odin 3.09.
Reboot your S4 Mini SPH-L520 into download mode. Turn phone off > Hold Volume Down, Home Button, and Power Button all at the same time. Wait for the phone to buzz and the pop up on the screen. Release the buttons and press Volume Up to confirm.
Now plug in your phone to your computer. It might take a few seconds for the drivers to install. Wait until Odin shows blue color in the first bar on the left side. Should say 0:[COM3] (the COM number will be different depending on your computer and the USB port you plugged it into)
VERY VERY IMPORTANT! Make sure that the AUTO-REBOOT and F. RESET TIME boxes ARE checked. Make sure that the RE-PARTITION box is NOT checked.
4) Unzip the NE3 download from earlier. Click on the AP button in Odin and navigate to where you unzipped NE3. It should be a .MD5 type of file
Give Odin a few mins to check the file. It may appear that Odin has hung up, just be patient.
After Odin has run the check, it should say ok in the little window on the bottom left. Now click START and wait.
DO NOT bump the phone, the laptop, the usb cord, and MAKE SURE THE BATTERY DOES NOT FALL OUT!!!
After Odin is done flashing, it will reboot the phone. After the initial reboot, the phone will reboot itself once more. Be patient
Now wait for the phone to completely boot up.
5) After you have got back to ME3, you can follow this guide to root it ---> http://androidxda.com/root-samsung-galaxy-s4-mini-sprint-sph-l520
You already have most of the files you need. Just follow the instructions and download what you do not have already.
By the way, in Odin the AP button and the PDA button are the same
(This method should not trip the Knox counter, but I am unsure. Mine was already tripped before all of this)
OPTIONAL (this will trip the Knox counter and lose warranty status)
6) Now you can use this guide to install the custom recovery ---> http://techbeasts.com/2014/05/04/in...-root-sprint-samsung-galaxy-s4-mini-sph-l520/
Again, you already have most of the files you need. DL what you don't have.
_________________________________________________________________________________________________________________________
I am planning on instaling CM11 ---> http://forum.xda-developers.com/showthread.php?t=2669991
This ROM apparently needs a specific recovery in order to work properly. I installed that one instead.
MAKE A BACKUP IN THE RECOVERY OF THE STOCK ROM BEFORE FLASHING ANY CUSTOM ROMS, or else be sorry later.
This is about as simplified as I could get it. Hope this helps out those of you that were as confused as I was.
I will not be providing support. Simply do not have the time. There is more than enough info here to help you figure out what to do.
fire3element said:
I have obtained a Sprint s4 mini. From what I can find, the current kernel is SE secure enforcing.
The exact build number is KOT49H.L520_4.4.2_0016
Build date is Oct 7 2014
I am not new here, I know that all known root methods are now bust. What other options are there?
Searching seems to be pretty difficult for this device. All searches for bootloader and recovery come up for the i9190 / i9195
If I use Kies or Odin to flash a previous recovery image, will that brick the device? Also in the settings, it says Secure Boot Status - Type: Samsung
Guess that is referring to the Knox enforcing
The particular image I had in mind to flash with Odin is SPR-L520VPUAMK2-20131115204826
Will it work? Or am I screwed?
Click to expand...
Click to collapse
Can you help me to backup your first partition on your phone and send to me. You can use EFS Professional on xda.
Hmm....I installed the NJ1 update through Odin. And then flashed the CF auto root (or maybe it was the recovery.tar) with no issues. I did this when NJ1 was first released.
NCTP2 said:
Hmm....I installed the NJ1 update through Odin. And then flashed the CF auto root (or maybe it was the recovery.tar) with no issues. I did this when NJ1 was first released.
Click to expand...
Click to collapse
Can you backup your phone by EFS Pro and send to me. Thanks.
NCTP2 said:
Hmm....I installed the NJ1 update through Odin. And then flashed the CF auto root (or maybe it was the recovery.tar) with no issues. I did this when NJ1 was first released.
Click to expand...
Click to collapse
I was unsure about it considering all the changes with SE Secure and Knox. Always pays to be safer than sorry. I could not find any reports of this anywhere after hours of reading and searching. Thanks for confirming though. :good:
quanqw said:
Can you backup your phone by EFS Pro and send to me. Thanks.
Click to expand...
Click to collapse
I am sorry, I have been really busy. What exactly are you trying to do? Asking someone to backup sensitive data from their phone and share it to a stranger can be alarming.
At least tell us what is going on or why you need the backup.
worked
fire3element said:
I was unsure about it considering all the changes with SE Secure and Knox. Always pays to be safer than sorry. I could not find any reports of this anywhere after hours of reading and searching. Thanks for confirming though. :good:
I am sorry, I have been really busy. What exactly are you trying to do? Asking someone to backup sensitive data from their phone and share it to a stranger can be alarming.
At least tell us what is going on or why you need the backup.
Click to expand...
Click to collapse
thanks alot
the baseband nearly killed me but i thanked my God for you. it worked for me
my question is, is there any way to get it work for domestic sim outside USA?

[Q] Need help unbricking

This is practically a cry for help after i searched for hours.
Model: Sm-n910P
Software version : Unknown
Android : 4.4.4
Baseband: Unknown
build: PVPU1ANK2
Stock recovery
(if anything else helps just ask)
Problem first: My note 4 has no network of any kind (wifi doesnt start , doesnt recognize sim card )
When i try attaching a usb cable i get Device is not recognized (checked drivers, cables so its software and it's the mobile)
The only communication with the device is via the SD Card.
Tried flashing a stock 4.4.4 via stock recovery. Nope! It says Update from external card is disabled.
I'm looking for a way to root , or flash anything.
Every thought, suggestion, idea is welcomed.
armandomulla said:
This is practically a cry for help after i searched for hours.
Model: Sm-n910P
Software version : Unknown
Android : 4.4.4
Baseband: Unknown
build: PVPU1ANK2
Stock recovery
(if anything else helps just ask)
Problem first: My note 4 has no network of any kind (wifi doesnt start , doesnt recognize sim card )
When i try attaching a usb cable i get Device is not recognized (checked drivers, cables so its software and it's the mobile)
The only communication with the device is via the SD Card.
Tried flashing a stock 4.4.4 via stock recovery. Nope! It says Update from external card is disabled.
I'm looking for a way to root , or flash anything.
Every thought, suggestion, idea is welcomed.
Click to expand...
Click to collapse
Never been OTA updated to lollipop OE1? That one doesn't allow downgrading to older versions.
Device not recognized with USB in what mode and operation? Security protocols for KitKat and Lollipop are restricted. Device should be recognized in custom recovery or download mode. Did you try Odin? Power down, download mode and flash the NK2 stock tar. If you're still having problems ##786#. Still having issues, try the NIE stock tar. Make sure you power down before flashing stock tars. Link to KitKat tars mentioned above; follow OP, post 1 for instructions.
http://forum.xda-developers.com/showthread.php?p=56853341
For root, you need CF Auto Root for Note 4. You can also try TWRP Manager for custom recovery. It's in Google Play. But you don't have to root to flash in Odin. Samsung KIES is alternate method for restoring factory firmware or updates but some are confused by the serial number request; not recognized. Haven't tried it myself.
Sent from my SM-N910P using Tapatalk
Tx for the reply.
Device is not recognized in neither mode (normal, download or recovery).
I tried ##786# but i dont know my msl and i cant find a wy to get it (im outside the US so the phone is not activated). I tried some "msl reader find my msl" programs but they cant get it. Any1 has some apk that may work in my case?
As for the flashing as I stated all I need is a way to flash stock but i cant get the PC to recognize the phone so im stuck.
EDIT 1 As far as I know never been updated (bought the phone in ebay)
I don't know if there's anything that can be done but get a refund. Sounds like you bought a brick. Was it always a brick?
Did you try another USB port? Try the rear port. If not, try a hard reset: wipe cache and dalvik and factory reset and try to reboot. Long shot would be a hard reset and OB7 update.zip; unless it's completely stock, the update will be rejected. But I'm thinking that can no longer just be placed on external sdcard. That may have to placed on the file system as if the phone downloaded it, itself.
It's safer to hard reset. If not rebooting to normal operation, time to pursue a refund.
Sent from my SM-N910P using Tapatalk
So I was thinking about the situation you're in. I recalled the phone can be unlocked to use internationally on 3G only. Is it unlocked? It would also
need to set your carrier APN/Access points to get data.
If you own the phone, Sprint will give you the MSL number. Sprint can help unlock it and there's also this method but I don't know much about about it. There's also the hard reset method that can be done within settings.
Here's a method that was requested with a pledged bounty. But try Sprint first.
http://forum.xda-developers.com/spr...print-samsung-unlocker-unlock-sprint-t2928250
My initial impression was phone is bricked but not sure if a locked phone's WiFi is bound to regional USA that would cause WiFi connection issues? It's still possible the USB issue is not using a USB 2.0 port or a bad cable. It may not be bricked. Try reinstalling driver and/or another PC.
Sent from my SM-N910P using Tapatalk
Well I tried everything u mentioned , full factory restore, wipe everything. I even tried update from external (since stock has no option for updating from the internal sd) but i get an error (update from external storage is disabled). The phone is practically a brick for the network part but I'm not sure I can return it back in the states as I'm in Europe. Any way i can root via some apk ?
armandomulla said:
Well I tried everything u mentioned , full factory restore, wipe everything. I even tried update from external (since stock has no option for updating from the internal sd) but i get an error (update from external storage is disabled). The phone is practically a brick for the network part but I'm not sure I can return it back in the states as I'm in Europe. Any way i can root via some apk ?
Click to expand...
Click to collapse
I didn't think the root is possible without Odin for either the custom recovery or root.
eBay return practice would be to notify seller of issue. If no response, contact eBay.
Sent from my SM-N910P using Tapatalk
armandomulla said:
Well I tried everything u mentioned , full factory restore, wipe everything. I even tried update from external (since stock has no option for updating from the internal sd) but i get an error (update from external storage is disabled). The phone is practically a brick for the network part but I'm not sure I can return it back in the states as I'm in Europe. Any way i can root via some apk ?
Click to expand...
Click to collapse
Wouldnt the entire phone be soft-bricked (not just the network part) if you did the factory reset and wiped your phone but cant get the cable to recognize your phone on your pc ???
Or is that your current situation?
Well everything but network works. I can install apk's from sdcard, open apps etc. Next thing is the screen just got black and is not giving signs of life (didn't do anything it was charging) so it's going in a repair shop. Thanks everyone for the efforts. Case may be considered closed.
armandomulla said:
Well everything but network works. I can install apk's from sdcard, open apps etc. Next thing is the screen just got black and is not giving signs of life (didn't do anything it was charging) so it's going in a repair shop. Thanks everyone for the efforts. Case may be considered closed.
Click to expand...
Click to collapse
Well, good luck. Hope it works out for you.
As an after thought, have you tried connecting another Samsung phone to the computer?
jhill110 said:
Well, good luck. Hope it works out for you.
As an after thought, have you tried connecting another Samsung phone to the computer?
Click to expand...
Click to collapse
Thanks and yes my other Note 4 connects just fine

Seriously Need Help!!

Hello All,
I have a T mobile samsung SHG-M919 (pre-owned) that I bought fully paid from T mobile store.
here's my journey to current issue:
1. update to Cynogenmod latest version (download in SD card and install through recovery mode) -- Successful
2. work email addition requires encryption - OK, permission granted.
3. after encryption, phone does not reach homepage. reboots again and again.
4. decided to re-install factory firmware through samsung kies.
5. Kies requires S/N for phone and for some weird reasons after refurbishment T mobile did not included this info on battery compartment sticker. there is IMEI, FCC_ID, and everything else but not the serial number.
its not listed on receipt, box, or t mobile customer service records.
Any suggestions on what I can do?
Thanks in advance!!
elderstahl said:
Hello All,
I have a T mobile samsung SHG-M919 (pre-owned) that I bought fully paid from T mobile store.
here's my journey to current issue:
1. update to Cynogenmod latest version (download in SD card and install through recovery mode) -- Successful
2. work email addition requires encryption - OK, permission granted.
3. after encryption, phone does not reach homepage. reboots again and again.
4. decided to re-install factory firmware through samsung kies.
5. Kies requires S/N for phone and for some weird reasons after refurbishment T mobile did not included this info on battery compartment sticker. there is IMEI, FCC_ID, and everything else but not the serial number.
its not listed on receipt, box, or t mobile customer service records.
Any suggestions on what I can do?
Thanks in advance!!
Click to expand...
Click to collapse
Elderstahl,
That is quite the problem. However, the fix is pretty simple.
Are you familiar with Odin? Get it here if you don't have it:
http://forum.xda-developers.com/showthread.php?t=2711451
Use Odin from your computer to flash the firmware from here:
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Be sure to slap their thanks buttons for providing links to all of the downloads.
Once you do that, you will be returned to stock.
If you don't have a windows computer and use Linux, you can also download Heimdall. If you have Heimdall, you can flash a TWRP image from here:
https://dl.twrp.me/jfltetmo/
And boot into recovery, wipe, and install a new rom. Like SlimLP
http://forum.xda-developers.com/galaxy-s4-tmobile/development/rom-slimlp-jfltetmo-t3377731
Either way, this should get you up and running. Let me know if you need more help.
Perfect, Worked like a charm.
I am back on factory firmware.
Can not thank you enough!!
Cheers!
AlaskaLinuxUser said:
Elderstahl,
That is quite the problem. However, the fix is pretty simple.
Are you familiar with Odin? Get it here if you don't have it:
http://forum.xda-developers.com/showthread.php?t=2711451
Use Odin from your computer to flash the firmware from here:
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Be sure to slap their thanks buttons for providing links to all of the downloads.
Once you do that, you will be returned to stock.
If you don't have a windows computer and use Linux, you can also download Heimdall. If you have Heimdall, you can flash a TWRP image from here:
https://dl.twrp.me/jfltetmo/
And boot into recovery, wipe, and install a new rom. Like SlimLP
http://forum.xda-developers.com/galaxy-s4-tmobile/development/rom-slimlp-jfltetmo-t3377731
Either way, this should get you up and running. Let me know if you need more help.
Click to expand...
Click to collapse

Categories

Resources