Hi,
Thanks for reading my request,
I got a p605 imported from usa but it ended up being a chinese version with country code tgy,
I want to flash a btu uk rom to it, got the rom and do know that can flash by odin, but when i went into odin mode it had alot new information about knox and alot of others that i dont understand.
I want to change the contry code to btu, install the rom and keep the status as official,
Can that be done....?
Help please
I got the same P -605 from HongKong. I just flash btu through odin and that's it. No problem at all, knox counter not trip and firmware remains official.
wannajump said:
I got the same P -605 from HongKong. I just flash btu through odin and that's it. No problem at all, knox counter not trip and firmware remains official.
Click to expand...
Click to collapse
Hey, thanks for info, will flash now
Related
Hi all,
I have a Galaxy S3 already and have been following this forum for a while, but I have never had problems with it as with this one. It's about my Galaxy S4 mini DUOS (i9192). I've bough the phone from an unofficial seller because i9192 was never supposed to be imported in Croatia (EU). The phone came with I9192XXUAMF7 build and modem. Today I've expereinced that the phone was running fine but I couldn't make any calls and nobody could call me untill I've taken out the battery and SIM. It was runnign on one SIM only. Network was OK and signal was full. I' would like to change the modem to see if that's the problem.
My question is - has anyone experienced anything similar or has changed the XXUAMF7 modem? I'm located in Croatia (Europe) and the closest country modem localisation is Ukraine. Should I change it to Ukraine modem?
|Vyp| said:
Hi all,
I have a Galaxy S3 already and have been following this forum for a while, but I have never had problems with it as with this one. It's about my Galaxy S4 mini DUOS (i9192). I've bough the phone from an unofficial seller because i9192 was never supposed to be imported in Croatia (EU). The phone came with I9192XXUAMF7 build and modem. Today I've expereinced that the phone was running fine but I couldn't make any calls and nobody could call me untill I've taken out the battery and SIM. It was runnign on one SIM only. Network was OK and signal was full. I' would like to change the modem to see if that's the problem.
My question is - has anyone experienced anything similar or has changed the XXUAMF7 modem? I'm located in Croatia (Europe) and the closest country modem localisation is Ukraine. Should I change it to Ukraine modem?
Click to expand...
Click to collapse
I find Ukraine/Russia/Afghanistan/Uzbekistan Modem/Rom combo best in my region ( Romania )
Take care tho latest roms contain Knox bootloader Either flash one that have bootloader removed that i posted on this forum, or u can try the rom i use
SilviuMik said:
I find Ukraine/Russia/Afghanistan/Uzbekistan Modem/Rom combo best in my region ( Romania )
Take care tho latest roms contain Knox bootloader Either flash one that have bootloader removed that i posted on this forum, or u can try the rom i use
Click to expand...
Click to collapse
Thanks for the notice! I have SGS 3 and it has no Knox bootloaders so I'm not familiar with it but from what I've read it's a no no. My original bootloader is stock Samsung. No Knox icons in download mode. I just might try your ROM. Have been reading about it just a few minutes ago.
I've been listing sammobile FWs and it gives me Russian and Ukrainian ROMs. You're suggesting I give one of them "a spin"?
|Vyp| said:
Thanks for the notice! I have SGS 3 and it has no Knox bootloaders so I'm not familiar with it but from what I've read it's a no no. My original bootloader is stock Samsung. No Knox icons in download mode. I just might try your ROM. Have been reading about it just a few minutes ago.
I've been listing sammobile FWs and it gives me Russian and Ukrainian ROMs. You're suggesting I give one of them "a spin"?
Click to expand...
Click to collapse
Yes BUT ! Do not download any firmware that have MK4 MK5 ML1 ML2 ML4 NA2 in name They contain Knox bootloader
Hi guys. I have the gt-I9195 from Germany EPL with firmware I9195XXUBNB3. I see all other carriers updating their handset to 4.4 but EPL does nothing. Anyone knows if and when they are going to update? I even emailed customer support and got no answer.
Ps: If I flash an other official firmware will it trip the knox flag?
mitsos1os said:
Hi guys. I have the gt-I9195 from Germany EPL with firmware I9195XXUBNB3. I see all other carriers updating their handset to 4.4 but EPL does nothing. Anyone knows if and when they are going to update? I even emailed customer support and got no answer.
Ps: If I flash an other official firmware will it trip the knox flag?
Click to expand...
Click to collapse
Nobody knows when carriers update their devices.
No, it won't trip knox if you flash a stock firmware. Take the Germany DBT or any other european firmware and you are good to go.
XxM4tzexX said:
Nobody knows when carriers update their devices.
No, it won't trip knox if you flash a stock firmware. Take the Germany DBT or any other european firmware and you are good to go.
Click to expand...
Click to collapse
Ok, Thanks for your reply... I am done waiting,... so probable I will give an other rom a try...
hi guys, i first installed the russian Nougat update because in germany (DBT) it wasnt out like 2 weeks ago.
So now it's out and i flashed the original german one over it with wiping everything. So far so good. The problem that i have now is that my orginal CSC "DBT" isn't activated.... it automatically installed the "BTU" CSC (UK)
My question now: How can i change back to DBT? I flashed the german CSC again but i doesn't seem to work that way :/ I added some screenshots from Samsung Phone Info App. The Original CSC-Code line is also blank whyever....
thx in advance!
https://forum.xda-developers.com/showpost.php?p=43553707&postcount=14 if it doesn't work i have another method
the same thing with my phone (i have flashed an XEF )
but this csc is not important at all .....
-You have german language
-the playstore have the same apps
- you have the same samsung fonctions apps and parameters .
-the modem have the same European bands
.....
Yeah i flashed the Portuguese rom and somehow got the sloveanian csc. I tried using the method above for changing but it didnt work. It doesnt matter, its the same stuff anyway.
The other method is to flash a single CSC rom and after flash DBT CSC
Chaos107 said:
The other method is to flash a single CSC rom and after flash DBT CSC
Click to expand...
Click to collapse
I know that but where will i download the portuguese rom? I cant from sammobiel at 15kb/s. Im kinda screwed. **** it my phone is slovenian now, i have a new nationality **** it.
StewieTech said:
I know that but where will i download the portuguese rom? I cant from sammobiel at 15kb/s. Im kinda screwed. **** it my phone is slovenian now, i have a new nationality **** it.
Click to expand...
Click to collapse
try to download firmware from here at fullspeed: http://updato.com/firmware-archive-select-model
or here http://live.samsung-updates.com/index.php?device=SM-A520F if you got a premium account from uploaded.net or rapidgator
ill try one of the methods now and i'll report my result than
warboss said:
try to download firmware from here at fullspeed: http://updato.com/firmware-archive-select-model
Click to expand...
Click to collapse
Ah cool bro, thanks!
That's really weird. I installed the german Vodafone software and get this:
warboss said:
hi guys, i first installed the russian Nougat update because in germany (DBT) it wasnt out like 2 weeks ago.
So now it's out and i flashed the original german one over it with wiping everything. So far so good. The problem that i have now is that my orginal CSC "DBT" isn't activated.... it automatically installed the "BTU" CSC (UK)
My question now: How can i change back to DBT? I flashed the german CSC again but i doesn't seem to work that way :/ I added some screenshots from Samsung Phone Info App. The Original CSC-Code line is also blank whyever....
thx in advance!
Click to expand...
Click to collapse
Can you please tell me what is your Knox Warranty Void status after all that flashing? I'm concerned about warranty if I flash german firmware which doesn't have the same csc as mine.
Loulou-13 said:
the same thing with my phone (i have flashed an XEF )
but this csc is not important at all .....
-You have german language
-the playstore have the same apps
- you have the same samsung fonctions apps and parameters .
-the modem have the same European bands
.....
Click to expand...
Click to collapse
Can you tell me your Knox Warranty Void status after flashing that?
marchoffmmann said:
Can you tell me your Knox Warranty Void status after flashing that?
Click to expand...
Click to collapse
my knox is OK ! not tripped... 0-0
i have flashed a "pure" official signed firmware, providing to sammobile beru safe and serious ...
I repeat for csc ! it's not important at all !!!! :angel:
i have an unbranded BTU (multi-csc) firmware ...
Loulou-13 said:
my knox is OK ! not tripped... 0-0
i have flashed a "pure" official signed firmware, providing to sammobile beru safe and serious ...
I repeat for csc ! it's not important at all !!!! :angel:
i have an unbranded BTU (multi-csc) firmware ...
Click to expand...
Click to collapse
Sorry for interuption, but i just want to confirm - you had French firmware and then you flashed Russian and then again went back to French and your original csc has changed during this but your warranty isnt void? Thank you very much.
marchoffmmann said:
Sorry for interuption, but i just want to confirm - you had French firmware and then you flashed Russian and then again went back to French and your original csc has changed during this but your warranty isnt void? Thank you very much.
Click to expand...
Click to collapse
sorry ,i didn't have precised ...
original provider firmware (sfr france) MM 6==> flash XEF unbranded MM6 firmware with odin providing to sammobile ( but it's a multi-csc firmware and BTU is the csc-master)==> i wait OTA for N7
But when i have flashed this MM unbranded ,i didn't have had problem with my knox
As i have said ,if you flash a FULL official signed firmware ,in theory it's ok :good:
same on me ! rom is from romania and csc is from CZ. what this means ? csc
if i downgrade to mm ? now from nougat
I bought my F900F from Thailand, and I stay in India, I downloaded the firmware from the Sammobile and flashed using ODIn but no luck I am still on Thai Firmware not Indian but whereas on the Sammobile site it says for India.
Can anyone guide me or help me. I want Indian firmware as For Samsung Pay and other things are much different for 2 regions.
deadlyheart4u said:
I bought my F900F from Thailand, and I stay in India, I downloaded the firmware from the Sammobile and flashed using ODIn but no luck I am still on Thai Firmware not Indian but whereas on the Sammobile site it says for India.
Can anyone guide me or help me. I want Indian firmware as For Samsung Pay and other things are much different for 2 regions.
Click to expand...
Click to collapse
I'll try to help you. Please tell me the exact steps you took to flash the firmware including what Odin said when the flashing was complete.
seh6183 said:
I'll try to help you. Please tell me the exact steps you took to flash the firmware including what Odin said when the flashing was complete.
Click to expand...
Click to collapse
I just waited it for to reboot and started normal, i didn't do anything else but it was the same for Thailand only.
Exact steps:
I downloaded the INU firmware from sammobile
ODIN 3.1.3
Put the extracted files in AP / CP / BL/ CSC
Ran the update
It happened and completed -> Pass
Then i waited for phone and it was still Thai Firmware.
deadlyheart4u said:
Exact steps:
I downloaded the INU firmware from sammobile
ODIN 3.1.3
Put the extracted files in AP / CP / BL/ CSC
Ran the update
It happened and completed -> Pass
Then i waited for phone and it was still Thai Firmware.
Click to expand...
Click to collapse
Hi, friend!
Do you have call record on Thai Firmware?
Yes I do
https://www.dropbox.com/s/ht6dsgvn8dbpvbd/Screenshot_20191108-071348.jpg?dl=0
https://www.dropbox.com/s/l1cmyj7pkbfhv4h/Screenshot_20191108-071330.jpg?dl=0
I'd like to change region. How to do that? Any idea, anybody?
i dont think anyone has any answer.
deadlyheart4u said:
I bought my F900F from Thailand, and I stay in India, I downloaded the firmware from the Sammobile and flashed using ODIn but no luck I am still on Thai Firmware not Indian but whereas on the Sammobile site it says for India.
Can anyone guide me or help me. I want Indian firmware as For Samsung Pay and other things are much different for 2 regions.
Click to expand...
Click to collapse
Didn't you ask the same question on SamMobile?
You can't change the CSC from Thailand (THL) to India (INU)
henklbr said:
Didn't you ask the same question on SamMobile?
You can't change the CSC from Thailand (THL) to India (INU)
Click to expand...
Click to collapse
Cant it be done anyway, I am really unable to use samsung pay.
Up theme
Hello, I currently have an SM-N976N.
I bought refurbished and live in Ireland.
I am looking for a compatible firmware that's not Korean but not having much luck. I can't flash anything in Odin except n976n firmware, and even that didn't seem to get rid of the sky telecom provider bloatware and branding.
I can provide CSC etc if anyone thinks they can help! Looking for something like a global or UK Ireland Unlocked like the B...
tried to flag KOO firmware...I used CSC as opposed to home Csc but I also used userdata file in Odin as well.
The sk splash screen and bloatware is still present.. There was a warning or info message on phone after I flashed, and then it rebooted again. I couldn't read it as it was in Korean.
Also, if there's no way to change to a euro firmware, is there any way to change bootloader/recovery/download language?
Voidstudios said:
Also, if there's no way to change to a euro firmware, is there any way to change bootloader/recovery/download language?
Click to expand...
Click to collapse
Hello, try this firmware, you can convert your N976N to N976B, none of the files are tested by me, let me know if you had any luck successfully flashing your phone.
N976N OS12 OneUI 4.1 DualSIM AutoPatch
Thanks, are these official firmwares?
Voidstudios said:
Thanks, are these official firmwares?
Click to expand...
Click to collapse
Yes they are official firmwares but are modified for converting N976N to N976B global dual sim
OK just concerned about tripping knox
Voidstudios said:
OK just concerned about tripping knox
Click to expand...
Click to collapse
Replaced the links with latest firmware I found, this also uses XSG CSC, please flash this firmware and let me know if it works
N976N OS12 OneUI 4.1 DualSIM AutoPatch