Develop Bugs

PLEASE HELP...odin fails modem

im trying to use odin to put a stock rom on my phone...and everything goes fine till the end and the modem part fails...all the time...i did a factory reset...and tried 2 different roms...any suggestions...or links to rooted stock roms...i tried root66 and they failed ...but have worked in the passed for me...and now somehow theres a verizon rom on my phone that will boot but then do nothing...please...please...please help... THANKS IN ADVANCE...

re: flashing
phordych05 said:
im trying to use odin to put a stock rom on my phone...and everything goes fine till the end and the modem part fails...all the time...i did a factory reset...and tried 2 different roms...any suggestions...or links to rooted stock roms...i tried root66 and they failed ...but have worked in the passed for me...and now somehow theres a verizon rom on my phone that will boot but then do nothing...please...please...please help... THANKS IN ADVANCE...
Click to expand...
Click to collapse
You need to be very specific about the problem you are experiencing.
Exactly what model is your phone, Tmobile T999 or AT&T I747 ?
Also do you want to flash the stock rom for your phone or do you
want to flash the stock-rooted rom?
The Verizon rom did not just happen to appear in your phone, you or someone
else must have flashed it for reasons which are beyond my comprehension.
Good luck!

Misterjunky said:
You need to be very specific about the problem you are experiencing.
Exactly what model is your phone, Tmobile T999 or AT&T I747 ?
Also do you want to flash the stock rom for your phone or do you
want to flash the stock-rooted rom?
The Verizon rom did not just happen to appear in your phone, you or someone
else must have flashed it for reasons which are beyond my comprehension.
Good luck!
Click to expand...
Click to collapse
I want a stock rooted rom...i have the t999

re: stock rom
phordych05 said:
I want a stock rooted rom...i have the t999
Click to expand...
Click to collapse
If you want a stock rom click here: UVDLJA this is the un-rooted T999 Galaxy S3 4.1.1 Jellybean firmware.
This is the same rom which came with your T999 Galaxy S3 it needs to be flashed using ODIN.
You need to unzip the file in order to get the TAR file inside before flashing.
After flashing it might take up to 5-10 minutes to fully boot.
Good luck!

Misterjunky said:
If you want a stock rom click here: UVDLJA this is the un-rooted T999 Galaxy S3 4.1.1 Jellybean firmware.
This is the same rom which came with your T999 Galaxy S3 it needs to be flashed using ODIN.
You need to unzip the file in order to get the TAR file inside before flashing.
After flashing it might take up to 5-10 minutes to fully boot.
Good luck!
Click to expand...
Click to collapse
i really wanted a rooted one...BUT THIS VERIZON MODEM IS STUCK ON MY PHONE...I FLASHED...oops sry for the caps...cause everything works fine till the end and says modem failed...so im thinking i have to flash a modem first...yes...?

re: modem
phordych05 said:
i really wanted a rooted one...BUT THIS VERIZON MODEM IS STUCK ON MY PHONE...I FLASHED...oops sry for the caps...cause everything works fine till the end and says modem failed...so im thinking i have to flash a modem first...yes...?
Click to expand...
Click to collapse
No, if you odin flash any rom it will over write the modem.
If your phone is a T999 (not t999v) then do this and the phone will work properly:
This will over write your modem with the proper one for a T999 phone and this will
flash the stock rooted T999 4.1.2 Jellybean rom.
Follow the instructions below.
Here is the step by step guide:
After you have followed these instructions your phone will have the new T999 4.1.2 jellybean pre-rooted firmware.
Download the stock-rooted Odin flash T999_UVDMD5 Samsung Galaxy S3 Jellybean v4.1.2 firmware.
After downloading make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download and extract Odin into the same folder you made containing the TAR file
Here is the link for Odin: http://d-h.st/Q14
Download ODIN which is required for flashing the stock rooted firmware (a windows app)
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)

But the Chinese models usually come with write protection

[Q] No voice

To make a long story short I was in CM11 and when trying to restore to stock I tripped the Knox Counter. I no longer have voice or audio. I tried to restore to other custom roms with same issue. I tried downloading stock tmobiles images and am unable to restore with odin. Question after triggering the Knox does that not allow me to even restore a stock rom or is my issue some place else? Any help?

It's my understanding you can not Odin back to MDL but you should be able to Odin the MK2 firmware.
☞ Sent from here☜???

re: knox
ahoslc said:
To make a long story short I was in CM11 and when trying to restore to stock I tripped the Knox Counter. I no longer have voice or audio. I tried to restore to other custom roms with same issue. I tried downloading stock tmobiles images and am unable to restore with odin. Question after triggering the Knox does that not allow me to even restore a stock rom or is my issue some place else? Any help?
Click to expand...
Click to collapse
If you are sure that you tripped the knox counter this is how to fix the audio issue.
Download the official M919 STOCK 4.3 MK2 firmware/rom from http://SamMobile.com .
(filename: M919UVUEMK2_M919TMBEMK2_TMB.zip inside zip is the tar file)
Then Odin flash the tar in Odin's PDA slot.
After you odin flashed the 4.3 MK2 successfully see if the audio/sound/voice is good.
If it's not then download the latest KToonsez 12-12-2013 kernel and flash it using
cwm/twrp recovery. (after the phone is rooted)
Here is the direct download link for KToonsez kernel:
https://copy.com/kEWuwwaGj8j2/TW%20JB%204.3%20Versions/KT-SGS4-JB4.3- TW-TMO-12.12.2013.zip?download=1
Before you can cwm/twrp flash the kernel or any cwm/twrp flashable zip file you need to
be rooted.
Here is the direct download link for the odin flash CF-AUTOROOT:
http://download.chainfire.eu/328/CF...jfltetmo-jfltetmo-sghm919.zip?retrieve_file=1
It's always best in any case to flash the KToonsez kernel after flashing new roms.
Good luck!

It's always best in any case to flash the KToonsez kernel after flashing new roms.
WHy is this kernel so famous and need to install after installing new ROMs? -
Good luck![/QUOTE]

Misterjunky said:
If you are sure that you tripped the knox counter this is how to fix the audio issue.
Download the official M919 STOCK 4.3 MK2 firmware/rom from http://SamMobile.com .
(filename: M919UVUEMK2_M919TMBEMK2_TMB.zip inside zip is the tar file)
Then Odin flash the tar in Odin's PDA slot.
After you odin flashed the 4.3 MK2 successfully see if the audio/sound/voice is good.
If it's not then download the latest KToonsez 12-12-2013 kernel and flash it using
cwm/twrp recovery. (after the phone is rooted)
Here is the direct download link for KToonsez kernel:
https://copy.com/kEWuwwaGj8j2/TW%20JB%204.3%20Versions/KT-SGS4-JB4.3- TW-TMO-12.12.2013.zip?download=1
Before you can cwm/twrp flash the kernel or any cwm/twrp flashable zip file you need to
be rooted.
Here is the direct download link for the odin flash CF-AUTOROOT:
http://download.chainfire.eu/328/CF...jfltetmo-jfltetmo-sghm919.zip?retrieve_file=1
It's always best in any case to flash the KToonsez kernel after flashing new roms.
Good luck!
Click to expand...
Click to collapse
I am having the same issue as the OP. But my understanding is, with Knox (which I unfortunately seem to have acquired, my fault) I cannot use Odin to flash a tar file.

You can still flash. You may trip the counter and you can't flash back to 4.2, but Odin still works.
Sent from my SGH-M919 using XDA Premium 4 mobile app

At this point knox is already tripped, and that's okay. But to resolve my loss of sound and voice I would have to use Odin to flash a T-Mo 4.3 tar, such as the one above? This will flash everything, including modem, right?
Could i also Odin flash the full TMo 4.3 modem with the same results?

re: knox
alouden said:
I am having the same issue as the OP. But my understanding is, with Knox (which I unfortunately seem to have acquired, my fault) I cannot use Odin to flash a tar file.
Click to expand...
Click to collapse
Not being able to flash tar files with odin due to having knox
must be some kind of rumor, but that's all it is a rumor.
It's not true at all.
Good luck!

Misterjunky said:
Not being able to flash tar files with odin due to having knox
must be some kind of rumor, but that's all it is a rumor.
It's not true at all.
Good luck!
Click to expand...
Click to collapse
Thanks. Will be doing this later at home. Fingers crossed :good:

Misterjunky said:
Not being able to flash tar files with odin due to having knox
must be some kind of rumor, but that's all it is a rumor.
It's not true at all.
Good luck!
Click to expand...
Click to collapse
Intersting...I Odin flashed the latest update. During the flash, I did see modem being flashed in the progress window. Still Have the same issue. I am confused. Not sure why this did not work.

re: modem/baseband/mdl/mk2
alouden said:
At this point knox is already tripped, and that's okay. But to resolve my loss of sound and voice I would have to use Odin to flash a T-Mo 4.3 tar, such as the one above? This will flash everything, including modem, right?
Could i also Odin flash the full TMo 4.3 modem with the same results?
Click to expand...
Click to collapse
Here are the step by step instruction on how to get the MK2 modem.bin
baseband flashed successfully.
Here is the way to fix the audio issue you are having.
This will ONLY fix your audio issue if your baseband is MDL
so check your baseband by going to Settings>More>About device
and scroll down after clicking About device til you see baseband.
It will either have MK2 or MDL in it. If it's MDL then your
audio issue can be fixed by following the instructions below.
You can Odin flash MK2 while on an Wicked v9.1 4.2.2 rom or ODIN
flash it after flashing the Wicked v9.1 4.3 or other M919 based 4.3 roms.
Either way it makes no difference.
What does make a difference is to follow this step by step exactly to a "T".
#1: Manually power down the phone using the power button only
#2: Start ODIN and put the MODEM.BIN file into ODIN'S PHONE slot/tab.
#3: Put the phone into download mode by using the volume down and power button only.
#4: Plug the USB cable into the phone and into the computer.
#5: Make sure that ODIN'S [COM:xx] lights up.
#6: Un-Check the Auto-Reboot in ODIN and click START.
#7: After its done flashing unplug the usb cable.
#8: Manually power off the phone using the power button.
#9: Wait 20 or so seconds before you power on the phone.
After doing this the MK2 baseband should show up in About Device.
Here is the direct download link for the Tmobile 4.3 M919 MK2 modem.bin:
http://www.mediafire.com/download/1g...l89x/modem.bin
After your baseband displays MK2 you don't need to do anything,
the phone will then be ready to use with all it's bells and whistles.
I would highly suggest that you make a nandroid backup in TWRP recovery before you
change any settings, installing or flashing any apps, mods, themes or anything else.
Good luck!

Misterjunky said:
Here are the step by step instruction on how to get the MK2 modem.bin
baseband flashed successfully.
Here is the way to fix the audio issue you are having.
This will ONLY fix your audio issue if your baseband is MDL
so check your baseband by going to Settings>More>About device
and scroll down after clicking About device til you see baseband.
It will either have MK2 or MDL in it. If it's MDL then your
audio issue can be fixed by following the instructions below.
You can Odin flash MK2 while on an Wicked v9.1 4.2.2 rom or ODIN
flash it after flashing the Wicked v9.1 4.3 or other M919 based 4.3 roms.
Either way it makes no difference.
What does make a difference is to follow this step by step exactly to a "T".
#1: Manually power down the phone using the power button only
#2: Start ODIN and put the MODEM.BIN file into ODIN'S PHONE slot/tab.
#3: Put the phone into download mode by using the volume down and power button only.
#4: Plug the USB cable into the phone and into the computer.
#5: Make sure that ODIN'S [COM:xx] lights up.
#6: Un-Check the Auto-Reboot in ODIN and click START.
#7: After its done flashing unplug the usb cable.
#8: Manually power off the phone using the power button.
#9: Wait 20 or so seconds before you power on the phone.
After doing this the MK2 baseband should show up in About Device.
Here is the direct download link for the Tmobile 4.3 M919 MK2 modem.bin:
http://www.mediafire.com/download/1g...l89x/modem.bin
After your baseband displays MK2 you don't need to do anything,
the phone will then be ready to use with all it's bells and whistles.
I would highly suggest that you make a nandroid backup in TWRP recovery before you
change any settings, installing or flashing any apps, mods, themes or anything else.
Good luck!
Click to expand...
Click to collapse
Thanks for the detailed steps. So when I check baseband, I see that I have the MK2 baseband.

re: no more issues
alouden said:
Thanks for the detailed steps. So when I check baseband, I see that I have the MK2 baseband.
Click to expand...
Click to collapse
If you have MK2 baseband then you should have proper audio, no audio issues at all
and the rest of your phone should be working fine since it's already rooted and the
phone has the best custom recovery already flashed in it.
Be sure to make a nandroid backup using Twrp recovery before downloading,
installing, adding or flashing any mods, apps, themes or anything else.
Good luck!

Misterjunky said:
If you have MK2 baseband then you should have proper audio, no audio issues at all
and the rest of your phone should be working fine since it's already rooted and the
phone has the best custom recovery already flashed in it.
Good luck!
Click to expand...
Click to collapse
In a perfect world, yes. Not this time....I still have no sounds. And no audio on phonecalls. On the threat of divorce, my wife has made me promise to resolve this one way or another. All my efforts have failed. i am now stock 4.3, rooted, with twrp recovery. no sound.
Ah well...Happy New Year. And thanks to everyone for their help. I haven't given up. But my wife has a good lawyer.

Misterjunky said:
If you have MK2 baseband then you should have proper audio, no audio issues at all
and the rest of your phone should be working fine since it's already rooted and the
phone has the best custom recovery already flashed in it.
Be sure to make a nandroid backup using Twrp recovery before downloading,
installing, adding or flashing any mods, apps, themes or anything else.
Good luck!
Click to expand...
Click to collapse
Figured out the problem. So the MK2 Tar file I had was the culprit. I redownloaded the file from a different source, re-extracted the Tar and used Odin to reflash the tar file. Funny, the first file did not have a MD5 mismatch and did flash a modem. Well, whatever the issue was, I am glad it was resolved. Thanks for all your help guys.

[Q] m919nuvuemk5 HELP!

Ok, I am not new to flashing but its not somthing I do on a regular basis...I got in a hurry and screwed up my phone.
I have been running cyanogenmod 10.2 and my wife has the same phone that I left stock. They are T-Mobile Galaxy S4 SGH-M919. Yesterday I poked around a bit and found the most up to date rom I could, it was m919nuvuemk5. What I failed to notice was that this rom is for Metro PCS which may be owned by t-mobile , but is definitly not t-mobile.... I flashed and it boots all the way to the Metro PCS splash screen and thats where it stops. SO...I started looking around a bit more and found the thread - [GUIDE][HOW-TO] Return device back to stock 'Official'!
at :
http://forum.xda-developers.com/showthread.php?t=2336392
So the short version is that right now the rom I have flashed is m919nuvuamdb but my base band is still m919nuvuemk5 and my knox fuse is popped 0x1 The phone works fine but I have no wifi I did factory resets and wiped everything trying to get the wifi working but sofar no joy. I can root with CF-Auto-Root via ODIN with no problem. :good: I can apply custom recoveries like CWM with no problem. :good:
So all is not lost.
My questions are:
1. It is my understanding that at this time there is no way to remove the Knox 0x1 that says my phone is trash for corporate use. :cyclops: Is this true?
2. My boot times are very long, (2m 10s) it seems to hang on the "Samsung Galaxy S4" screen where it says " kernel is not seandroid enforcing set warrenty bit: kernel" Is there a way to make the warning go away? How about a shorter boot time? I think if t-mobile comes out with a m919nuvuemk5 rom I should be ok and the warnings will go away atleast. Is this right?
3. How do I make my wifi work?
I could really use some help with this, I have been reading allover these boards for a day. Please save your chastising for your children, know I screwed up. Just lead me in the right direction.

Try flashing the mk2 modem.
If that don't work you might have to Odin flashed the whole 4.3 firmware.
☞ Sent from here☜???

baseballfanz said:
Try flashing the mk2 modem.
If that don't work you might have to Odin flashed the whole 4.3 firmware.
☞ Sent from here☜???
Click to expand...
Click to collapse
Where can I find just the modem?

This is how I did that: the file is in the op. http://forum.xda-developers.com/showthread.php?t=2544612
Sent from my SGH-M919 using XDA Premium 4 mobile app

Android_Monsters said:
This is how I did that: the file is in the op. http://forum.xda-developers.com/showthread.php?t=2544612
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Went there , did that , did'ent work. It did improve my boot times significantlly though. so Thanks! :good:
Think Ill flash : ROM|TW|4.3|MK2] Modified Stock M919UVUEMK2 V1.4 [CIQ|KNOX-FREE][12/10/2013]
and see how that works...

still no luck
Ok so I have flashed the above rom and even went back to cyanogenmod but Im still having problems. My wifi works fine now , but my phone has no sound...at all, I cannot make or recieve calls.

re: modem.bin
Jimcisme said:
Ok so I have flashed the above rom and even went back to cyanogenmod but Im still having problems. My wifi works fine now , but my phone has no sound...at all, I cannot make or recieve calls.
Click to expand...
Click to collapse
Why not try this easy to follow step by step instructions. This is how I done it myself.
#1: Manually power down the phone by using the power button only.
#2: Start ODIN and put the MODEM.BIN file into ODIN'S PHONE slot.
#3: Put the phone into download mode by using the volume down and power button only.
#4: Plug the USB cable into the phone and into the computer.
#5: Make sure that ODIN'S [COM:xx] lights up.
#6: Un-Check the Auto-Reboot in ODIN and click START.
#7: After its done flashing unplug the usb cable.
#8: Manually power off the phone using the power button.
#9: Wait 20 or so seconds before you power on the phone.
After doing this the MK2 baseband should show up in About Device.
Once you have done this successfully you will no longer have
audio or wifi issues.
Here is the direct download link for the 4.3 MK2 modem.bin:
http://www.mediafire.com/download/1g...l89x/modem.bin
Also if you have never Odin flashed the new full stock
4.3 MK2 Galaxy S4 TW Jellybean firmware/rom then
you don't have knox and you don't need to worry about
it unless you odin flashed the full firmware/rom.
You cannot get KNOX by simply odin flashing the MK2 MODEM.BIN file.
Good luck!

Jimcisme said:
Ok so I have flashed the above rom and even went back to cyanogenmod but Im still having problems. My wifi works fine now , but my phone has no sound...at all, I cannot make or recieve calls.
Click to expand...
Click to collapse
You need to get the correct modem on your phone. Flashing ROM will not change the modem so you will continue to have problems.
☞ Sent from here☜???

FIXED
baseballfanz said:
You need to get the correct modem on your phone. Flashing ROM will not change the modem so you will continue to have problems.
☞ Sent from here☜???
Click to expand...
Click to collapse
Hi, I did manage to get it straightened out.
1. Rooted the Phone with CF-Auto-Root via ODIN Thanks to Chainfire :good: http://forum.xda-developers.com/showthread.php?t=2294005
2. Did factory reset in recovery.
3. Flashed the 4.3 MK2 modems (plural) from http://www.mediafire.com/download/1gsjokadys4l89x/modem.bin from the link Misterjunky :good: provided.
4. Flashed this ROM- Build Date: 16.11.2013 -> Region: TMB (USA (T-Mobile)) PDA: M919UVUEMK2 Changelist: 2015522 Android: 4.3
From this page : http://forum.xda-developers.com/showthread.php?t=2267895 Thanks to AdamLange :good:
It is possible that I did not need to flash the modems as when I flashed the rom it loaded a modem.bin file. But I figured better safe than sorry. This is a rom from samsung as far as I can tell, It took much longer to flash than all the others I flashed. It got rid of the "Kernel is not seandroid enforcing " message I had at the boot loader too. Everything works good so far! I may try to root again later.
Thanks too all for all your help!

Jimcisme said:
It is possible that I did not need to flash the modems as when I flashed the rom it loaded a modem.bin file. But I figured better safe than sorry. This is a rom from samsung as far as I can tell, It took much longer to flash than all the others I flashed. It got rid of the "Kernel is not seandroid enforcing " message I had at the boot loader too. Everything works good so far! I may try to root again later.
Thanks too all for all your help!
Click to expand...
Click to collapse
Yes if you use Odin to flash the full firmware it will also flash the modem. If you flash ROM via custom recovery it will not change modem.
☞ Sent from here☜???

[Q] Questions updating modem

Hey guys. Have flashed many of a rom before on many phones i have owned. When it comes to the radio i know there are chances of this going VERY wrong. My question is which modem should i be using?
Phone = T-Mobile Samsung Galaxy S 4 (SGH-M919)
Rom = Wicked V9.1 (which i believe wants a MK2)
Baseband version = M919UVUAMDL
Android Version 4.3
If there are any other details i left out please ask and i will reply asap. Why i am wanting to update to the newer baseband is once flashing to 4.3 i have gotten TERRIBLE signal within my home (before it was perfect). After every call i make, once ended it will drop the cell signal and shortly after pick it back up. Mainly the reason i want to update is to get signal back in my home. For the most part i have zero signal in the most common areas i am in. Thanks again!

This worked for me: http://forum.xda-developers.com/showthread.php?t=2544612
Sent from my SGH-M919 using XDA Premium 4 mobile app

Screenshot
Sent from my SGH-M919 using XDA Premium 4 mobile app

Following those directions i dont see a phone option in Odin 3.09. I missing something here?
EDIT: nm figured it out all is well now. thanks
Now im hoping this fixes the crappy signal / data drops.

inpherno3 said:
Following those directions i dont see a phone option in Odin 3.09. I missing something here?
EDIT: nm figured it out all is well now. thanks
Now im hoping this fixes the crappy signal / data drops.
Click to expand...
Click to collapse
It should fix it...it's working 4.4.2 for me with MK2 modem.

I try and flash the modem.bin file but my baseband never changes. Can someone give me dumb user steps?
Sent from inside the time vortex

re: modem.bin
johnadelic said:
I try and flash the modem.bin file but my baseband never changes. Can someone give me dumb user steps?
Sent from inside the time vortex
Click to expand...
Click to collapse
NOTICE: If you are running/using any AOSP/AOKP/CM/GE/KitKat or any PORTED roms
or if your phone is NOT an M919 Tmobile then the following does NOT apply to you.!!!
Have you tried this:
You can Odin flash the MK2 modem.bin while on any Jellybean Touchwiz 4.2.2 based rom
or ODIN flash it after flashing the Infamous v9, Wicked v9.1, or any M919 MK2 JB based
Touchwiz 4.3 roms. Either way it makes no difference.
What does make a difference is to follow this step by step exactly.
#1: Manually power down the phone by using the power button only.
#2: Start ODIN and put the MODEM.BIN file into ODIN'S PHONE slot.
#3: Put the phone into download mode using the volume down and power button.
#4: Plug the USB cable into the phone and into the computer.
#5: Make sure that ODIN'S [COM:xx] lights up.
#6: Un-Check the Auto-Reboot in ODIN and click START.
#7: After its done flashing unplug the usb cable.
#8: Manually power off the phone by using the power button only.
#9: Wait 20 or so seconds before you power on the phone.
After doing this the MK2 baseband should show up in About Device.
Once it displays MK2 you can flash any MK2 JB TW 4.3 custom cwm/twrp
zip file roms unless you have already flashed it before flashing the modem.bin
in which case you are done and ready to use the phone.
Here is the direct download link for the Tmobile 4.3 M919 MK2 modem.bin:
http://www.mediafire.com/download/1g...l89x/modem.bin
Good luck!

I got it to work. I must of had a MDL modem before not the MK2. I am running a kk ROM and it worked just fine by taking the modem.bin from the rar file.
Thanks everyone.
Sent from inside the time vortex

Misterjunky said:
NOTICE: If you are running/using any AOSP/AOKP/CM/GE/KitKat or any PORTED roms
or if your phone is NOT an M919 Tmobile then the following does NOT apply to you.!!!
Have you tried this:
You can Odin flash the MK2 modem.bin while on any Jellybean Touchwiz 4.2.2 based rom
or ODIN flash it after flashing the Infamous v9, Wicked v9.1, or any M919 MK2 JB based
Touchwiz 4.3 roms. Either way it makes no difference.
What does make a difference is to follow this step by step exactly.
#1: Manually power down the phone by using the power button only.
#2: Start ODIN and put the MODEM.BIN file into ODIN'S PHONE slot.
#3: Put the phone into download mode using the volume down and power button.
#4: Plug the USB cable into the phone and into the computer.
#5: Make sure that ODIN'S [COM:xx] lights up.
#6: Un-Check the Auto-Reboot in ODIN and click START.
#7: After its done flashing unplug the usb cable.
#8: Manually power off the phone by using the power button only.
#9: Wait 20 or so seconds before you power on the phone.
After doing this the MK2 baseband should show up in About Device.
Once it displays MK2 you can flash any MK2 JB TW 4.3 custom cwm/twrp
zip file roms unless you have already flashed it before flashing the modem.bin
in which case you are done and ready to use the phone.
Here is the direct download link for the Tmobile 4.3 M919 MK2 modem.bin:
http://www.mediafire.com/download/1g...l89x/modem.bin
Good luck!
Click to expand...
Click to collapse
I tried flashing that on Wicked v9.1, but I'm still getting the MDL modem in the "about" area. I'll try following your guide again. :cyclops:
Edit: It worked! Thanks <3

[Q] Need some 4.3 update help

Hi, I have a Samsung Galaxy S4 for T-Mobile rooted to wicked rom. I want the new T-Mobile 4.3 update but I don't know how to do it. I remember that there was a way with kies that I did on my S3. Was wondering if anyone had a guide.

re: upgrade to 4.3
hefaith said:
Hi, I have a Samsung Galaxy S4 for T-Mobile rooted to wicked rom. I want the new T-Mobile 4.3 update but I don't know how to do it. I remember that there was a way with kies that I did on my S3. Was wondering if anyone had a guide.
Click to expand...
Click to collapse
You don't need kies at all. If you do use kies, ota or odin flash stock official firmware you will
catch the knox pox unless you stay stock & official and don't flash any kernels or custom roms.
Once you do the full official odin flash/ota/kies update you will NOT be able to downgrade.
If you don't want to catch the Knox pox, then download the Wicked v10 4.3 MK2 custom rom,
you will not find a better rom to flash here on xda.
After you flash the Wicked rom you should download/flash the MODEM.BIN file so your
baseband will be MK2 to match the rom. The MK2 baseband has a better radio.
Use this MK2 modem.bin, a lot of people used this already including myself and it worked fine.
http://download1276.mediafire.com/db...l89x/modem.bin
If you don't care about Knox and the possibility of voiding your warranty then simply go and
download the stock official M919 Tmobile Jellybean 4.3 MK2 firmware from SamMobile.com.
After odin flashing the stock official firmware you will be able to root it using cf-autoroot and
you will be able to flash cwm/twrp custom recovery and any custom roms, however if you do
you will get the Knox pox which has no effect on performance or features in the rom it only
effects the the possibility of voiding your warranty if you have one.
Doing the following will NOT effect the warranty status, and you will not catch the Knox pox,
it will only update your baseband to MK2 which works fine with either 4.2.2 or 4.3 roms.
Flash using Odin's PHONE slot. (NOT PDA)
Flashing guide:
Do not connect the usb cable until step #4
1: Open Odin and put this MODEM.BIN file into Odin's PHONE slot & un-check "auto reboot"
2: Power off the phone manually (power button only - don't use the four way power menu)
3: Restart the phone in download mode (power+vol-down only)
4: Connect USB cable from phone to computer
5: Make sure that Odin's [COM:xx] lights up
6: Click START in Odin
7: When done unplug the usb cable
8: Power off the phone manually using power button only.
9: Wait 20 seconds or so before powering up the phone.
If you followed these step by step instructions you should
see MK2 baseband in "About Phone" (Settings>More>About phone)
(It does not matter which version of ODIN you are using, all ODIN versions work fine.)
Good luck!