MHL Micro USB Bridge to VGA Adapter - Samsung Galaxy Nexus

Hello
Anyone have experience with MHL Micro USB to VGA adaptor ?
Im thinking to buy this one: http://www.amazon.co.uk/Bridge-Ster...&sr=8-3&keywords=MHL+Micro-usb+to+vga+adaptor
It says compatible with Galaxy Nexus.
I want it, to do some powerpoint presentations, anyone have experience with that? Galaxy Nexus can handle it?
Thanks in advance.

NerdySpam said:
Hello
Anyone have experience with MHL Micro USB to VGA adaptor ?
Im thinking to buy this one: http://www.amazon.co.uk/Bridge-Ster...&sr=8-3&keywords=MHL+Micro-usb+to+vga+adaptor
It says compatible with Galaxy Nexus.
I want it, to do some powerpoint presentations, anyone have experience with that? Galaxy Nexus can handle it?
Thanks in advance.
Click to expand...
Click to collapse
Yes Galaxy Nexus can use this
:good::good::good:

EruMiNaTE said:
Yes Galaxy Nexus can use this
:good::good::good:
Click to expand...
Click to collapse
Confirmed, works well.

i bought one adapter and i have problem. it works but when i connect it to my eizo m1900 monitor i cant see the whole screen. it cuts the edges. any1 know something about that? i am stock 4.3

manolitos123 said:
i bought one adapter and i have problem. it works but when i connect it to my eizo m1900 monitor i cant see the whole screen. it cuts the edges. any1 know something about that? i am stock 4.3
Click to expand...
Click to collapse
Sounds like the display resolution of the monitor is too low.

Related

Mhl dock

Does anyone know when Verizon is releasing the hdmi dock for the GNex? And if there is one out there already will it work with an otterbox defender case on it? If not, can someone link me to an Mhl adapter that actuality works (preferably on amazon) , I've tried 2 and I haven't had luck with either...
Thanks
Phone: Galaxy Nexus
ROM: GummyNex
Kernel: Franco
Hydera5 said:
Does anyone know when Verizon is releasing the hdmi dock for the GNex? And if there is one out there already will it work with an otterbox defender case on it? If not, can someone link me to an Mhl adapter that actuality works (preferably on amazon) , I've tried 2 and I haven't had luck with either...
Thanks
Phone: Galaxy Nexus
ROM: GummyNex
Kernel: Franco
Click to expand...
Click to collapse
No idea about a dock (from what I've heard Verizon's accessories are junk), but have you tried the MHL cables with a different monitor/TV? Perhaps the one you're trying to utilize does not support 1280x720 over HDMI. Oh, and you are plugging them into power, correct? I find it kind of hard to believe that you could have two 'duds.'
They aren't Samsung official... That may be why. but I have only tried it on one TV. Do you think it's the settings on my TV? I have done everything I can and still can't figure out why it's not coming up. It says unusable signal on my tv.
Phone: Galaxy Nexus
ROM: GummyNex
Kernel: Franco

Samsung MHL to HDMI Adapter not working??

Hello guys, I registered in this forum hoping to find a solution for the problem I have.
I bought an original Samsung HDTV Adapter (Micro USB type) to use it to connect my new Galaxy S3 to my LCD Samsung TV via HDMI cable, BUT IT DOESN’T WORK !!
I checked the same adapter with a Galaxy Nexus and it worked just fine, but I had no luck to get it work with Galaxy S3. Any reason for that?
Please help. Thank you!
Have you set the TV-Out options on the phone?
There is no TV-Out options in the phone !! , any other thoughts?
The settings might be in the AllShare application or something like that, most phone's with TV-Out don't have it enabled by default as you have to choose PAL/NTSC/etc. I'm just guessing based on my SGS1 though, I don't have my SGS3 yet.
Can confirm it's not working. Couldn't find any mention of mhl in the manual either.
Also mine that I used with Note is not working
Inviato dal mio GT-I9300 con Tapatalk 2
Damn, this is a bit of a major for me! I hope this isn't a case of Samsung not including MHL to sell more of their AllShare Cast dongles...
Charlie Sheen aproves this accessory.
http://www.handtec.co.uk/product.ph...--official-wi-fi-display-hub--ead-t10udegxeu-
This is a major letdown. I've also bought a MHL adapter to use with my (delayed pebble blue -.- ) SIII, didn't expect this to happen.
Anyone else has tried connecting the phone through hdmi?
That’s really frustrating!! I guess I figured it out and it doesn’t look nice from Samsung.
I found this accessory online which is yet to be released and compatible with the S3:
Part No: EPL-3FHUBEGSTD (sorry I cant post links as im a new user and the system wont allow me, u will be able to find that part in MobileFun site )
The same older model won’t work !! it’s the same device though with an older version. Here is the old model part no. which is available in market now:
Part No: EIA1UHUNBECSTD (u can search it in the same site “MobileFun”)
So if you have your old HDTV Adapter, I guess you can’t use it with the S3. That’s BAD Samsung, really BAD
Anyway, if any 1 can figure a way to make the older model work with the S3 please post it here, as im not eager to buy a second HDTV Adapter
Hi
I tried my old Bizlink with my S3 - it definitely does not work. Apparently only the new cable (EPL-3FHUBEGSTD) will work.
MobileFun expect their new HDTV adaptors on Friday.
Well, this is annoying. My old Samsung official MHL one doesn't work, and neither does my prototype one from the MHL consortium. Would like to know how Samsung explain messing up a connection standard?
My speculation: they have changed it so that the adapter delivers more charge to the S3 during MHL connection sessions...
NZtechfreak said:
Well, this is annoying. My old Samsung official MHL one doesn't work, and neither does my prototype one from the MHL consortium. Would like to know how Samsung explain messing up a connection standard?
My speculation: they have changed it so that the adapter delivers more charge to the S3 during MHL connection sessions...
Click to expand...
Click to collapse
Thats what i thought also !! Samsung must have changed the power requirement for the newer model. Its very annoying from Samsung i agree.
Got a confirmation from Samsung that the MHL adapter sold for the SGS2 won't work for the SGS3. They didn't mention whether they would release a new one, but I assume they will.
i have same problem i think they want us to buy dongle
Do you guys think the ebay version will work? Theres a few on there and they say they work with sgs3
donovan2123 said:
Do you guys think the ebay version will work? Theres a few on there and they say they work with sgs3
Click to expand...
Click to collapse
Pretty sure they won't work. Just wait for the official adapter.
donovan2123 said:
Do you guys think the ebay version will work? Theres a few on there and they say they work with sgs3
Click to expand...
Click to collapse
They won't work. They will have said that in anticipation of them working (which is entirely fair enough on their part, since, you know, MHL is a connections standard that Samsung seem to have messed up).
TV Output should be work as 1280 x 720 or 1920 x 1080 resolution?
kamzata said:
TV Output should be work as 1280 x 720 or 1920 x 1080 resolution?
Click to expand...
Click to collapse
It will mirror the phones display at 1280x720p, but will output HD video to the videos actual resolution up to full HD.
(when we have a working MHL adapter that is)

[Q] Micro USB to USB Adapter

Hi I was wondering if a micro usb to usb adapter such as this one would work with our LG Nitro HD. I'm currently using CM9 nightlies as my rom.
Don't see why it wouldn't but what's the purpose?
adca14 said:
Hi I was wondering if a micro usb to usb adapter such as this one would work with our LG Nitro HD. I'm currently using CM9 nightlies as my rom.
Click to expand...
Click to collapse
I don't know if CM9 supports OTG
Flyview said:
Don't see why it wouldn't but what's the purpose?
Click to expand...
Click to collapse
Almost all of my medical textbooks are pdfs, so being able to copy from a friends pen drive a pdf to my phone so I can later copy it to my laptop at home is a major plus for me . I went ahead and purchased it anyways, so I'll report back if it works or not
So I finally got my usb-otg adapter. I plugged it in and tried a numerous amount off usb apps with no success. I wasn't able to use stickmount since the play store told me that it isn't compatible with my device. I haven't tried sideloading stickmount though. I'm running CM9 stable, not sure if it works with the stock roms or with JB.
I've never seen any indication that the Nitro HD supports USB-OTG. It's not listed in the spec sheets I've checked at least.
drumist said:
I've never seen any indication that the Nitro HD supports USB-OTG. It's not listed in the spec sheets I've checked at least.
Click to expand...
Click to collapse
I just got my USB-OTG cable ... now i can try implement it, wish me good luck :fingers-crossed:
Good luck! USB Host is the only thing that's missing to Nitro.
btw, do you try micro usb-> hdmi cable?
It work on official rom but I wonder It can run on CM9 ROM or not
thnx
yelliver said:
btw, do you try micro usb-> hdmi cable?
It work on official rom but I wonder It can run on CM9 ROM or not
thnx
Click to expand...
Click to collapse
My hdmi adapter works fine in CM9, so I don't think you should have any problems if you switch to CM9.
adca14 said:
My hdmi adapter works fine in CM9, so I don't think you should have any problems if you switch to CM9.
Click to expand...
Click to collapse
haha, I will buy that cable and try, thnx^^
I think Nitro HD is not supports OTG

[Q] MHL-HDMI Output

Hi guys
I want to use my t989 as SNES/PSX console with HDMI output+PS3 controller, or just use my TV for see my series, videos and photos without DLNA of connect it via USB cable. It's a feature I want
A friend of mine borrow me a MHL-HDMI cable (I ordered mine already) and I tried with stock and other ROM's, I have output once with CM10.1 but can't have it anymore and according to docs and IRC chat that functionality is undocumented and will never work. Only touchwiz based ROM's have TV-OUT, do you know which ones support that? Is there any chance to get this for CM or others?
Thanks in advance
---EDIT 2013-03-02
List of ROM's supporting MHL-HDMI
- Slimbean 4.1
- Liquid smooth rc9 (according to thread pointed out by nreaction)
cristianpark said:
Hi guys
I want to use my t989 as SNES/PSX console with HDMI output+PS3 controller, or just use my TV for see my series, videos and photos without DLNA of connect it via USB cable. It's a feature I want
A friend of mine borrow me a MHL-HDMI cable (I ordered mine already) and I tried with stock and other ROM's, I have output once with CM10.1 but can't have it anymore and according to docs and IRC chat that functionality is undocumented and will never work. Only touchwiz based ROM's have TV-OUT, do you know which ones support that? Is there any chance to get this for CM or others?
Thanks in advance
Click to expand...
Click to collapse
It worked for me on Slimbean 4.1 so I assume it works on other 4.1 ROMs. Haven't been able to get it to work on 4.22 AOKP.
cristianpark said:
Hi guys
I want to use my t989 as SNES/PSX console with HDMI output+PS3 controller, or just use my TV for see my series, videos and photos without DLNA of connect it via USB cable. It's a feature I want
A friend of mine borrow me a MHL-HDMI cable (I ordered mine already) and I tried with stock and other ROM's, I have output once with CM10.1 but can't have it anymore and according to docs and IRC chat that functionality is undocumented and will never work. Only touchwiz based ROM's have TV-OUT, do you know which ones support that? Is there any chance to get this for CM or others?
Thanks in advance
Click to expand...
Click to collapse
I thought, I would never say this but at least try and use the search function, all i typed was "mhl" search in general section. Here is the thread your looking for though. I can confirm it works for cm10, but haven't tested with cm10.1.
http://forum.xda-developers.com/showthread.php?t=2000135&highlight=mhl
In my experience with the MHL adapter it will drain your batter to basically nothing while using it even though it is plugged into a power source. When you get done playing you're going to have to charge your phone back up .
jrosetto said:
In my experience with the MHL adapter it will drain your batter to basically nothing while using it even though it is plugged into a power source. When you get done playing you're going to have to charge your phone back up .
Click to expand...
Click to collapse
There is an app that will turn your phone screen off but keep your MHL connection live and then your battery problems are solved. I just can't for the life of me remember the name of it. I have used it and it works great though.
Well I just ordered one so if you think of the name of the app please let me know. Thanks
Sent from Galaxy S2 using Jedi Mind trick
nreaction said:
I thought, I would never say this but at least try and use the search function, all i typed was "mhl" search in general section. Here is the thread your looking for though. I can confirm it works for cm10, but haven't tested with cm10.1.
http://forum.xda-developers.com/showthread.php?t=2000135&highlight=mhl
Click to expand...
Click to collapse
Thanks for pointing me to that thread, even though I think it's a little different because doesn't have a list or something like that of ROM's in which MHL-HDMI output works currently (from the thread I saw liquid smooth have it)
I will try the recomendations you guys told me and have in mind jrosetto said, thanks. If anyone knows others ROM's with the feature functioning, please share your experience with us
TMK216 said:
Well I just ordered one so if you think of the name of the app please let me know. Thanks
Sent from Galaxy S2 using Jedi Mind trick
Click to expand...
Click to collapse
Its called Screen standby.
Work all Roms 4.1..2 edit build prop.
ro.hdmi.out
True
Reboot.... :thumbup:
Avatar rom 4.1.2
Rom All Star v7. 4.1.2
Slim rom 4.1.2
Liquid Rom 4.1.2
Rom TweakWiz 4.1.2
Etc.... All 4.1.2 roms work HDMI hml for TV Hd...
i know this is a old thread, but does anyone know why anything higher then 4.XX does not work with the hdmi ?

[Q] Find 7 via OTG into USB DAC. Will it work?

Looking to output signal out of the phone into my USB DAC. It works with my current phone, quite well.
If I'm to buy this Find 7 I need to know that it will work first. Anybody have any experience with this?
If I remember correctly find7 doesn't support USB OTG at all. Someone can correct me if I remember wrong
jebulol said:
If I remember correctly find7 doesn't support USB OTG at all. Someone can correct me if I remember wrong
Click to expand...
Click to collapse
The Find 7 supports OTG, but if it's supports a DAC, I don't know, I've only used for usb storage, keyboard and mouse.
coolriku said:
The Find 7 supports OTG, but if it's supports a DAC, I don't know, I've only used for usb storage, keyboard and mouse.
Click to expand...
Click to collapse
My mistake. It was MHL then that was missing
I'll let you know if it works with my DAC, soon, as my phone is slated for delivery today.
MHL, what is that? Hi-rez video out to an external device?
vbsert said:
I'll let you know if it works with my DAC, soon, as my phone is slated for delivery today.
MHL, what is that? Hi-rez video out to an external device?
Click to expand...
Click to collapse
Yup. Standard that allows HDMI output from usb port. I use it a lot with my tablet.

Categories

Resources