{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dorimanx LG G2 Kernel for STOCK 4.2.2 Branches!
Stable Only For:
D800 Models!
D801 Models!
D802/5/6 Models!
D803 Models!
LS980 Models!
VS980 Models!
NO MORE MODELS WILL BE SUPPORTED!
You need answers to QUESTIONS not belong to Development???
GO HERE! Q&A THREAD!
My kernel was based on LG G2 Stock Kernel v10a.
Kernel Tree is 3.4.87, + LG JB/KitKat updates + my tweaks and lots of tuning!
Global Credits!
Big thanks to g.lewarne for helping me to start!
Savoca for many kernel mods
Cyanogen ([email protected]) for many kernel mods
Faux123 for UV/OV, Sound Gain Control, Inteli Hotplug, Fast Charge support! and more!
Alucard_24 for AlucardHotplug and mods.
MyFluxi for MSM HotPlug and fixes.
LG for Stock kernel base!
Linus Torvalds for Linux source!
Default I/O Scheduling: ROW.More I/O Scheduling present in kernel: DEADLINE, NOOP, CFQ, SIO, BFQ.
Default CPU frequency: 300-2803 MHz (MAX OC up to 2.8Ghz speed!).
You can set MIN/MAX CPU Freq in CPU tuning apps.
Default CPU governor: Ondemand.
More CPU Govs present, conservative, performance, Intelidemand, OndemandPlus, Nightmare, Hyper, Pegasusq, IntelliActive.
Support for Kernel HOTPLUG (Intelli HotPlug by @faux123)
Support for Kernel HOTPLUG (Alucard HotPlug by @alucard_24)
Support for Kernel HOTPLUG (MSM Hotplug by @myfluxi)
Support Inteli CPU Temp control (by @faux123)
Support for CPU BOOST code.
Support limit OC to 2.3Ghz / 2.5Ghz / 2.7Ghz / 2.8Ghz (by @faux123)
Support undervolt/overvolting via sysfs interface/apps interface (by @faux123).
CIFS network share mounting supported.
Debugging is OFF by Default to save CPU cycles, and extend battery life.
Internal kernel function fixes (ie, memory leaks, scheduler fixes).
High performance, low latency kernel.
Compiled with -O2 flags and hardware neon-vfpv4 FPU enabled.
Built from official LG v10a kernel source.
Lokified during flash! support new VS980 12b BootLoaders.
File systems support: Ext2/3/4, FAT32, CIFS, USB OTG.
EXFAT, NTFS supported but need USB OTG APP! it's not native!
WIFI Driver 1.88.60 ported from LG G2 KitKat Kernel Source.
Sound Driver Control (Gain for headphones, mic, speakers) use Faux Sound App.Always forced fast charge! no matter what you select in ROM.
Sweep2Sleep! allow sweeping from right to left and backwards! on soft buttons to turn off the screen.
Kernel created using Google GCC 4.8 ToolChain + all needed mods for it.
Running Scripts from /system/etc/init.d/ is SUPPORTED but OFF in STweaks! if you need it, enable.
STweaks Kernel Control App will be installed with kernel.
Known BUGS!
*Auto Brightness is not going down smooth on some custom ROMS.
*Kernel not Supporting LS980 ZVA ROM Update!!!
Standard disclaimer:
By installing this kernel YOU will take full responsibility for any damage to your device!
Hardware or software! no one forcing you to install it.
So please do not blame me if you read wrong! or didn't read at all the instructions that i have written for YOU.
But you can feel SAFE to use it, as I test every release on my phone!
Before I publish it for download.
Your warranty will be void by installing custom kernel as my.
This kernel can ROOT/UNROOT your device!
And will ROOT ADB Shell!
Global Info About LG Models:
D800 = AT&T Model
D801 = US Tmobile Model
D802 = International Model
D803 = Canada Model
D805 + D806 (same as D802)
LS980 = SPR Model (Sprint)
VS980 = VZW Model (Verizon)
Kernel Sources:
KERNEL GITHUB
RAMDISK GITHUB
TO DOWNLOAD GO DOWN!!! YES MORE DOWN...(do i need to repeat?)
How To Install:
You will need to have ROOTED device with Recovery installed!
Refer to other threads for recovery install process.
Download kernel, upload it to your SDCARD, anywhere.
Download STOCK Kernel for your device!
so you will always have it on sdcard in case of any disaster!!!
Reboot to Recovery.
Install kernel as you installed ROM or any mod.
Reboot!
In case that you stuck on boot logo and want to revert to STOCK kernel.
Push PWR + Vol Down till phone reboot and you will see LG Logo!
Release and press the buttons again! till you see screen asking if you want to WIPE your device!
if you have recovery installed, then it's will just OPEN the recovery! no WIPE will happen!!!
Just push 3 time the PWR key. and you will be moved to recovery.
Install your device STOCK kernel and wait for FIX.
Have Fun and report.
Donation Board:
John0699 X2
ShyamSasi
Pendroz
MP1979
Bahrosuz
Matheus_sc
Schrotty35
Metalboy94
Johnbeetee
Dimourinho
Grimmy1st
Askicko(guest)
Bahrosuz
Praveen789(guest)
Martindar
SREEPRAJAY
Lanman1978
Maybelle
Kickoff
Mirror #1 by Willflint
Mirror #1 Here
MIRROR IS DOWN! under hackers attack.
Change logs:
27/04/14
Kernel 3.7 BETA!
*Updated Busybox 1.22.2 custom patches and support for F2FS
*Merged New HotPlug driver by Myfluxi named MSM HotPlug!
It's very good replacement for OLD junk ROM binary! that is slow!
Kernel driver works 10x faster!
It's now DEFAULT hotplug. controls in STweaks.
*Fixed My scripts, removed not needed things.
*Tuned Ondemand CPU gov to be faster and removed LAG on wakeup.
*Updated Alucard Hotplug from DEV tree. (bit thanks to @alucard_24)
*Updated EXfat driver and allowed ROM vold to use it! (big thanks to @faux123)
*Merged MMC updates from new sources.
*Removed some HACK that i have added long time ago.
From what i have learned best not to use them.
*Removed ROOT install/uninstall by kernel. not needed.
Every one has ROOT already any way...
*Removed Touch Boost and replaced with LG CPU Boost code.
12/04/14
Kernel 3.6 STABLE
*New changes to driver freezing on deepsleep to save more battery!
*Many updates to Alucard and Intelli HotPlug code.
more responsive and less memory used.
Also resolved bug with 2 of them working! when only one should be in RAM.
All the work done by DEV name Alucard_24 my good friend from Italy!
*Added F2FS filesystem code, for now it's not used, but one day will replace EXT4, it's much better and faster.
But no ROM support for now. any way we are READY
*Merged many CPU code fixes and updates.
*Merged Touch Boost Code to reduce any scrolling lags.
need more testing but seems good.
*Merged patches to camera driver.
*Merged patches to GPU driver
*Merged patches to IOMMU driver
*Merged patches to LEDS driver
*Merged patches to Crypto driver
*Merged patches to RAM code
*Merged Main Line patch 3.4.87
*Merged many misc fixes and updates see GIT.
*Fixed ROOT SU perms set on boot.
all of this also was merged to unreleased KitKat kernel!
12/04/14
Kernel 3.5 STABLE
*New updates to Alucard HotPlug by DEV him self.
It's more smart and very powerful but that comes with the price of more battery drain.
Any way it's very good.
*Tuned and Updated Ondemand Gov. now much more battery friendly and still smart and fast.
*Many fixes to RAM and OOM code from main line kernel.
*I have merged Darkness CPU gov and Alucard Cpu GOV.
Darkness is good for battery save it's simple and doing what it's should by his name! Sleep!
The alucard gov is not working as should, so leave it alone for now, it's STUCK on max freq all the time.
*I have merged Intelli Thermal driver in too MSM Thermal Driver + updated from KK Source.
We still have DEFAULT thermal that uses ROM binary + file config for temp control
And we have the Intelli Thermal as was but CORE of it is a lot better now! as it's now has all the rest of the driver that was OFF till now.
Any way it's working great with Intelli HotPlug or Alucard HotPlug.
Do not use it with Default HotPlug! freq will be stuck on on limited point when overheated!
Rom HotPlug have no idea how to rise to max again...
*Added some missing Kernel configuration based on KK Source!
Many of network code was missing for LS980 and VS980!
So this may fix many NET problems!
*Merged all new Critical patches for Kernel RAM and USB + MMC
05/04/14
Kernel 3.4 STABLE
*Patched with 3.4.85 + 86 main line updates.
*Alucard24 made many updates/fixes to Alucard hotplug gov.
it's stable and good to use any time.
*Me and Alucard24, we updated the Intelli HotPlug and fixed all bugs in it.
Now it's working great, i use it as daily driver! it's extremely fast and powerful.
*Merged updates for OOM so RAM management is improved.
*Merged fix for RAM leak in video driver.
*Added SuperSu 1.94 to kernel zip.
*Updated Interactive and Ondemand Cpu Govs.
and tuned for best performance vs battery preserve.
*Boosted internal kernel clock from 100HZ to 200HZ
This give us performance boost in all functions across the kernel.
Dont look in BENCH tests, it's not shown there...
*Tweaked ROM Thermal Engine driver,
now it's will allow 82C max and stop limiting freq below 65C was (80/60) = Small performance boost.
*Fixed Block Ads file update. now will work as should.
30/03/14
Kernel 3.3 STABLE.
*Fixed delays in ondemand gov. now it's has supreme power.
*Merged CM11 KK updates from codeaurora.org
A lot of CPU, ARM and RAM bug fixes and improvements!
130 Commits!
CPU heat reduced. and delays eliminated.
Suspend improved and much more.
29/03/14
Kernel 3.2.1 STABLE.
*Fixed critical BUG with Intelli Hotplug and CPU stress tests!
any bench app was making hot boot if using Intelli HotPlug
Now OK. please update!
28/03/14
Kernel 3.2
*Fixed CPU idle! now stay more on low freq and save power.
*Fixed Ram leaks
*Reverted some of the USB and PWR code that i merged from KK and ZVA
i dont see any change, only more stable STOCK code.
*I and Alucard_24, we did really big rework to Intelli Hot plug driver and to Alucard HotPlug!
Now they work better and faster.
intelli HotPlug can be selected ONLY via STweaks! other apps dont see it any more.
The control path is changed, i have alerted Faux123 and offered to update his code and app with new path.
*Tuned intelli thermal control driver.
*Reworked all CPU govs to use global function!
*Updated to Max Entropy random generator code from 3.14.rc6 kernel.
*Updated MMC (Sdcard) code.
*Patched with 3.4.84 patch.
21/03/14
Kernel 3.1 Battery drain on idle reported:
Fixed BUILD!
*Fixed boot for other branches
*Fixed high freq on idle.
*Updated with 3.4.83 main line patches.
*Merged some Power MNG code from KK Source
*Merged new updates to Intelli Hot Plug and Intelli Temp from Faux123 source!
*Merged Voltage corrections to cpu/gpu/screen to reduce power waste.
*Fixed Ondemand sampling rate and updated functions from Hyper to ondemand!
*Merged update to Alucard Hotplug
*Updated MMC code from KK Source! will reduce power usage on sleep.
*Merged fixes to cpu boost code! much less micro lags..
*Updated Entropy random code to speed up the system.
*Reverted some power/board merges from KK source that we cant use and best not to have till we move to KK ROM + Kernel.
*New the CPU Freq limit will work much better it's will not let user or any service / app to change cpufreq higher than the limit!
USE STWEAKS TO CONTROL MAX FREQ LIMIT!!!
16/03/14
Kernel 3.0 IN TEST:
*Reverted Sound code update from ls980 ZVA to fix Flac 24Bit 96Khz playback
via default player. (was working with paid players)
*Added Sweep2Sleep on/off in STweaks TWEAK tab.
*Merged many updates from KK Source kernel! that include:
Power code that allow great battery save on sleep and wake.
Modem Driver code, bug fixes,
CPU code fixes,
Memory bugs fixes.
*Merged new option for force fast charge to fake USB connection and force as AC
this mode has side effect, connection will be x2, 2 sounds 2 vibrates...
*Fixed locked max mA charge to 1500, now max 1800.
*Removed GPU govs SIMPLE and CONSERVATIVE. unstable and not really needed.
*Boosted all CPU govs to deliver more power and give as smoothness.
11/03/14
Kernel 2.9 STABLE:
*Reverted some of KK Kernel source updates to gain stability.
*Merged new WIFI driver 1.88.60 + all patches
*Tuned ondemand Gov to deliver good performance.
*Merged USB + NET +HWMON code from KK Kernel source 20c
*Updated NFC Driver for all branches
*Merged fixes to workqueue code for I/O operations.
*Removed some debug counters to free cpu from useless jobs.
Kernel reported to be stable and fast as should be. (i dont care about bench!)
it's normal any way...
09/03/14
Kernel 2.8 REMOVED! too much BUGS with CPU.
*Fixed CPU gov lags.
*Added new patches from main line.
*Added Sweep2Sleep from left to right and backwards.
*Added Control interface for CPU OC. now user can have stock speed!
and nothing can change the speed higher! not app or service! only STweaks!
this is useful for battery save or just for personal needs.
*Locked max CPU temp in intelli thermal control to 75C!
No matter how much you set, max is 75! and it's more than needed.
if you want more heat use LG thermal control.
*Improved random entropy pool generation. it's used by many apps
and when pool is empty cpu work much more to generate and even lags the system.
*Disabled turbo boost for now. it's not really needed as logic was, if only 2 cores ON, then allow 2.8Ghz to be used, if more than 3 then 2.5Ghz max.
we have 4 cores on/off all the time, so code is pointless.
*Disabled touch freq boots to MAX in ondemand code, it's burning power for nothing. if i like to move icon i dont need 2.8Ghz for that..
07/03/14
Kernel 2.7 (lag bugs)
*Major Update from LS980 ZVA LG Source Code!
Fixed USB disconnects when battery is full!
Fixed USB disconnects when using not powered HUB!
*MAX CPU to 2.8Ghz! and MIN to 96Mhz by faux123
*New Loki Patch by PhilZ-cwm6
*Merged Sweep2Sleep code! very cool thing!
just swipe from right to left on soft buttons panel and phone will sleep!
then knock knock to wake! by savoca and ayysir
*Fixed memory leaks!
*Merged many fixes for NET,RAM,CORE,ARM,RTC,CPUFREQ,MM,SOUND
from main line, LG ZVA, and Android patches from other kernels.
*Merged New code for Ondemand CPU gov from I9505 Device kernel.
*Updated EXFAT Source from Samsung.
*Tuned Intelli Thermal code and Intelli HotPlug.
Now there are more controls in STweaks and Good scores in bench apps!
the overall performance is GREAT, no need for bench score to see that.
*Default LG Hotplug will reset MAX freq to 2.8Ghz no matter what you set in any App! including STweaks.
So to have lower max freq use Intelli hotPlug or Alucard hot Plug.
*Kernel will boot with max 2.3Ghz but LG Hotplug will set MAX after boot.
*Merged Some critical parts from new KK LG Source Kernel!
*Merged Turbo Boost code by faux123, will boost cpufreq when max 2 cores needed to finish task, then cpufreq will drop to min.
*Fixed profiles and scripts in ramdisk.
*I have set ondemand as GPU GOV, it's more stable than others.
*When using Intelli Temp control, dont go above 75C for CPU Temp!
Hot Boot will happen! 2.8Ghz is a serious thing.
Kernel panic on 88C but it's reach it so fast that code dont react so fast to reduce heat.
and puff! hot boot... stay with 75C max! stable as wall.
Kernels are in Mirror 1 and Mirror 2
Have fun.
23/02/14
Kernel 2.6 BUG with MEM LEAK.
*Updated with 3.4.81+82 main line patches!
*Modded force fast charge code, and restored old hack parts to get max compatibility.
*Merged all new kernel updates from CM11 Kernel.
*Removed Gamma control code, it's was not working, and need more work and merges.
*Improved Ondemand CPU gov tuning and set it on boot for people that dont mess with controls.
now it's save power a lot and still responsive as needed.
*Merged Asynchronous Fsync by Faux123! to help with I/O speedup.
*Merged Implement conservative GOV for GPU by Entropy512
*Merged critical updates from main line kernel for global code operations and memory controls!
*Merged Updates for hotplug global code.
*Many other small patches see GIT.
*Added 1800mA limit for force fast charge, and set as default.
Profiles of STweaks will be reset to defaults to gain new options.
18/02/14
Kernel 2.5.1 Bugs with fast charge.
New Force Fast Charge driver made by Faux123!
+ STweaks interface for it!
STweaks profile will be reset to profile defaults to include new options!
Old Change Logs!
Kernel 2.5
Kernel 2.4
Kernel 2.3
Kernel 2.2
Kernel 2.1
Kernel 2.0
Kernel 1.8
Some LG Tricks! use them in your own RISK!
if you dont know something there! do not TOUCH!
From your LG G2 dialer, input the following codes, then press send:
AT&T LG G2 D800 Service Menu: 3845#*800#
T-Mobile LG G2 D801 Service Menu: 3845#*801#
Verizon LG G2 VS980 Service Menu: 3845#*980#
Sprint LG G2 LS980 Service Menu: 3845#*980# or 5689#*980#
International LG G2 D802 Service Menu: 3845#*802#
If you have Phone Wake lock as this!
it's can be 1000+ in hours!
com.android.internal.telephony action_check_netstat
then your ISP(phone company) do not support Fast Dormancy mode! or opposite! (and yours is OFF)
and it's ON by default in most of the phones, or UNKNOWN.
Any way to fix that drain, use the HACK menu above, to access phone secret options.
Settings > FastDormancy Mode
if STATUS = Enabled
then Disable and reboot!
If STATUS = DISABLED and you have the drain lock!
OR.
if STATUS = Unknown
then use ENABLE and reboot.
Monitor you wakelocks via Better Battery Stats app.
There are many things you can tweak in that menu, but DONT! it's not meant to be used by USER.
ONE more for me
Thanks for this! Will try and report findings
Sent from my LG-D802 using Tapatalk
Assuming" for now" means some love for the vs980 someday?
Sent from my VS980 4G using Tapatalk
Dorimax is here. That's fantastic! Nice surprise! Thanks a lot. I personally hope for a cm11 kernel version lol beside this I am now already considering to try a custom stock rom with the kernel. Lol looking forward!
Tnx dori Let the testing begin
@viking37 now you have something to test again
Lazy79 said:
Dorimax is here. That's fantastic! Nice surprise! Thanks a lot. I personally hope for a cm11 kernel version lol beside this I am now already considering to try a custom stock rom with the kernel. Lol looking forward!
Click to expand...
Click to collapse
Kernel will be build for CM11 and for other models in time.
I have worked days just to make this one
So no ETA! but it's will come.
In test.... Thank you man :thumbup:
Inviato dal mio LG-D802 utilizzando Tapatalk
ah..just like in HD2 days.
Gimme
thank you for your hard work.
In test too!
inviato dal mostro chiamato LG G2!
Maybe it's just me:
rom: stockmod 1.0.6
wifi mac address: none
wifi doesn't turn on.
No other modifications.
bender_007 said:
Maybe it's just me:
rom: stockmod 1.0.6
wifi mac address: none
wifi doesn't turn on.
No other modifications.
Click to expand...
Click to collapse
+1 wifi doesn't work
Edit: audio wirh player pro is very good now.... Thanks
Edit 2: rom gflex 1.4.2 tangjun
Inviato dal mio LG-D802 utilizzando Tapatalk
Works perfect with flex ROM 4 beta 3....gps,bt,Wi-Fi....smooth as silk
Great job mate....
D802 international
sent from my old war horse O2X or my new giant G2
Working Perfectly on D802 with Rayglobe 3.5 Flex.. Perfect.. all working fine.
I got 33,400+ on benchmark
Sent from my LG-D802 using XDA Premium 4 mobile app
D802 Stock 10f: wifi not working
Inviato dal mio LG-D802 utilizzando Tapatalk
rom gflex 1.4.2 tangjun
wifi not work
in faux control no undervolt
Tapatalk
@dorimanx mate.....keep it up....I might move here soon....cool stuff:good:....
And good luck on your new adventure
Beam-ed through your pineal gland via//Android 4.3.1//
Awesome! I have been waiting for this. Will try it as soon as I get home.
Sent from my LG-D802 using Tapatalk
bender_007 said:
Maybe it's just me:
rom: stockmod 1.0.6
wifi mac address: none
wifi doesn't turn on.
No other modifications.
Click to expand...
Click to collapse
MP1979 said:
+1 wifi doesn't work
Edit: audio wirh player pro is very good now.... Thanks
Edit 2: rom gflex 1.4.2 tangjun
Inviato dal mio LG-D802 utilizzando Tapatalk
Click to expand...
Click to collapse
Guys....please....do @dorimanx a favour :good:....provide some logs in txt form uploaded somewhere and posted here....He will gladly help you.....:good:
Beam-ed through your pineal gland via//Android 4.3.1//
Related
Presenting Kangaroo Kernel
Linux 3.0.93 ck1
Features:
Compiled with latest Linaro GCC 4.7.4 2013.05 toolchain with full -O3, Vectorizing, everything optimization
Better performance and battery due to more efficient algorithms
XZ compression
Sweep to wake, now default
Clocks from 122MHz to 1.5GHz (Boots up to HTC default, control with Trickster)
VDD interface
Fixed multitouch
FauxSound TPA: download the app from google play
Other fixes here and there
Dynamic FSYNC()
Interactive governor from Google 3.4: MUCH more responsive and tunable than before
SmartMax governor
Backports from CAF/upstream
SWAP enabled
2WCR ready (Nonverbose)
Audio enhancements from Rezound and Sensation XL Beats
Everything else Beastmode has, and many more features planned: for more detail see changelog
Installation: (S-OFF users)
1. Download kernel
2. Reboot to recovery
3. Backup
4. Flash kernel
5. Reboot
*Please let it sit for ~10 mins before running benchmarks or judging as it will need to settle down. Do not judge battery life unless you've run it through at least 3+ cycles after flashing*
Sources: https://github.com/bsmitty83/KANGAROO-kernel.git
Download latest version: Sense 3.6 and 4.x in one zip! Should work on any ICS sense based ROM
Changelog is in post #2 and in my update posts in this thread
KangarooKernel-r24.zip - 4.45 MB
*Please do not re upload without permission, I like to count downloads *
Thanks to these people: take the time to hit their thanks buttons too
Zarboz and Team Blackout
Lecahel for touchscreen fixes and other fixes
Szezso for help
Nikhil007mmus for his presence and advice with WiFi, if it wasn't for him I might have given up
Noverbose, Vido.ardes: git referencing, some wifi parts from Redux
tpbklake cause you are a good bloke
Faux123 and Chad Goodman for some patches, features and parts of the OP
This kernel was made by @poondog , i simply brought it to the incredible2 . all the features have been left unchanged by myself , all questions shoud be directed here but check out his original thread for more , and to thank him for his work
http://http://forum.xda-developers.com/showthread.php?t=2263344
CHANGELOG:
*****r24*****October 23*****
.fix wifi
.mm/proc-v7.S: Add .arch_extension sec
*****r23*****October 23*****
.Revert to r19 makefile flags
.patched in most of 2WCR (not all so it won't work)
.snapdragon sleep optimizations
.memory backports/ improvements from One V and CAF 3.4
.added sysfs interface to disable logger for better memory and less power waste (/sys/kernel/logger_mode)
.default logger off
.Shaky156 GPU OC patch
.Backported ondemand from CAF msm 3.4
.revert input mediator
.update interactive gov from google 3.4
.patch to 3.0.101 EOL
*****r22*****September 22*****
.improvements/updates to smartmax
.slimmed down defconfig a bit
.fix BCMDHD wifi driver (sense 4)
.port in One V audio drivers: BEATS and this time calling works too. This improves sound quality
.port in One V kgsl stuff for better graphics
.strip a lot of debugging
.tweak makefile optimizations w/ link time and graphite optimization
.reverted lowmemorykiller to r19
.bcmdhd wifi signal tweaks
.patched to 3.0.96
.updated linaro 4.7 toolchain to 2013.08
*****r21*****September 11*****
.Reverted some lowmemkiller stuff and stuff that caused problems
.Add input mediator from maxwen
.Support for input mediator in interactive and smartmax
.Update smartmax to latest
.Enhancements to conservative gov
.Add experimental OC to 1.8GHz
.Cleaned out defconfig
.Removed a lot of debugging which will lead to better performancce and battery
.Leaned out kernel a lot... stripped to under 5mb with the same optimizations and compression
.Power tweaks
.Makefile adjustments
.Patched to 3.0.95
*****r20*****September 3*****
.Sync updates
.Binder optimizations
.Changes to Makefile
.lowmemkiller improvements
.Patch to 3.0.94
.Altered smartmax tunables
*****r19*****August 25*****
.Switch back to 4.7.4 toolchain with -O3 and everything because the performance is better than 4.8 and -O2
.Update to latest Linaro toolchain 2013.07 for 4.7
.Patched all the way to latest, 3.0.93
.Smartmax updated to latest version and modified tunables for optimum performance
.Changes to Makefile optimization flags
.Updated RWSEM to Linux 3.10
.Update interactive gov
.More under the hood changes
*****r17*****July 15*****
.Patched to 3.0.86
.Fine tuned DanceDance governor
.A lot of under the hood algorithm updates
.Backports from Linux 3.4
.Enabled cgroup timer slack
.Compiled with latest Linaro 4.8.2 toolchain, with help from @szezso! Big thanks to you This should give a bit of a boost
.Switched to gzip compression cause xz gave errors with 4.8, and subsequently altered makefile for it
*****r16*****July 7*****
.Updates to smartmax governor and removed all my changes to its tunables so it should be a lot smoother at the slight cost of battery
.Some readahead backports from 3.4 CAF
.Redone memcopy, string, SHA1 and AES optimizations
.Updated to the latest Linaro 4.7 toolchain, 4.7.4 2013.06
.Made the default scheduler deadline now
.Patched to 3.0.83
.Changed the whole graphics driver system: now we use newer drivers from CAF
.Added dancedance governor
*****r15*****June 28*****
.Patched to 3.0.70
.Remove all fast charge stuff cause it doesn't work
.Many under the hood improvements and patches etc
.More GPU OC: 350MHz 3D and 300MHz 2D
.Imported CAF ondemand as opposed to HTC's, and modified it. It should lead to increased performance due to more performance bias but battery is really the same
.Imported CAF Interactive and included changes and optimizations from my grouper kernel which camefrom fransiscofranco's N4 kernel but were modified to suit this device... confusing?
.Alterations to Smartmax governor, now its boosts to 806MHz on input and to your max freq if it needs it.
.Backports from upstream (smp, rwsem)
*****r14*****June 21*****
.Patched to 3.0.65
.Disable LED notification light timeout: I tried it for a few hours and it didn't stop
.Tune up cfs
.Modified acpuclock (CPU steps) and disabled 1113MHz for now
.Bump voltage at higher freqs so hopefully its stabler
.Reverted all sound stuff from last time (Sound stuff should work as in r12)
.Smartmax: Tune a bit for more performance
.Some block optimizations
.Added fast charge
*******r13********
.fsync updates
.Audio driver enhancements from Rezound and Sensation XL source code: BEATS
.Some under the hood power saving things
.Some under the hood performance things (check github)
.More GPU scaling changes
.Add OC to 1.5GHz (1.497 to be precise, from Sensation XL source)
.Wifi enhancements: less power usage and see lower signals
.Update and optimizations to some IO schedulers
.Sense 3.6 and 4.x in one zip! Tested on my device, works for me
*****r12*****June 6*****
.Change WIFI PM mode when screen off for BCMDHD to save battery (Sense 4 wifi)
.Enabled BFQ IO scheduler
.Glitch free GPU freq changing, better graphics performance
.Tuned ROW IO scheduler with "winning tunables" from fransiscofranco's gnex kernel
.Revert voltages to stock CAF and limit OC to 1.4GHz just for stability.
.Some under the hood build optimizations
*****r11*****June 2*****
.more backports from linux 3.4
.Congestion algorithm improvements
.Compiled with new Linaro 2013.05 toolchain- 4.7.4
.BCMDHD IS WORKING WIFIIIIIIIIIII (Thanks Nik for your presence )
*****r10*****June 1*****
.Dynamic writeback feature from 3.1
.kgsl: Bulk update kgsl to 3.11
.init:calibrate: lpj from 3.4
.Altered frequencies and smartmax for smoothness in ui as well as battery
.GPU optimizations
.Lowmemorykiller enhancements
.More optimization flags
.Finally changed defconfig to show r10!
*****r9*****May 27*****
.ALSA updates (hopefully improve sound?)
.Enable XCHGADD_ALGORITHM by default
.Tweaked build optimizations
.Optimized crc32
.Audio and Fauxsound tweaks
.Dynamic writeback feature from Linux 3.1
.Fixed overclocking over 1200MHz, add back in OC to 2GHz (Might be unstable!)
*****r8*****May 26*****
.Patched to 3.0.52
.Implemented ck1 patchset
.Optimizations to lowmemorykiller
.Updates to Smartmax governor
.Backported binder from Linux 3.3
.uhid backported from 3.4
.Mutex improvements
.ROW io scheduler V4
.GPU OC? (szezso)
.io and scheduler improvements
.ext4 improvements
*****r7*****internal*****
*****r6*****May 11*****
Major performance update:
.glibc memcpy and stringcpy updates/optimization
.More TCP congestion algorithms, Westwood set as default
.Added frandom
.Switched to CAF frequency table from 3.4
.Freqs now from 122-1804MHz
.Optimized SHA1 algorithms
.Update Genlock
.Updates to scheduler from CAF
.SmartMax governor! Huge thanks to MaxWen
.Compiling optimizations- heaps of them!
.Dynamic readahead from AnthraX
*****r5*****May 9*****
.Changes to SLUB
.fsync() optimizations
.CPU alignment
.Added compiler time variables
.Enable RWSEM_XCHGADD_ALGORITHM
*****r4*****May 8*****
.Dynamic FSYNC()
.Sweep2wake as default. Control with Trickster
.Ported Interactive governor from Google 3.4 kernel, with some fixes: tuned to use more mid range freqs, WIP
.SWAP
.2WCR (from Nonverbose)
.Lowmemorykiller from Linux 3.4
.Many more underthehood performance changes
*****r3*****Unreleased
*****r2*****May 5*****
.Updated interactive governor to faux123's implementation on the Sensation
.Added Fauxsound
.Changed tunables on SmartAssV2 governor to make it use lower frequencies
.Improvements to lowmemorykiller and fixes to possible memory leaks
*****r1*****May 4*****
Initial release, based upon the sources of Beastmode cause we can't let a great kernel go to waste
Sweet. Another one for our forgotten Incredible. We went from ghost town to BOOM in just a few months. Thanks dude.
S2w isn't working atm I forgot to switch it from vivo to vivow lol ,
Now we just need some new roms for these kernels ................
Sent from my HTC Droid Incredible 2 using Kangaroo Power
Smitty you are a machine. Thanks for keeping our old phones alive. Should i flash now or wait until you get s2w working?
bc13 said:
Smitty you are a machine. Thanks for keeping our old phones alive. Should i flash now or wait until you get s2w working?
Click to expand...
Click to collapse
Up to you i guess lol , should be all i gotta do is add 2 characters to one file , just gotta get behind my computer to do it , maybe late tonight -tomorrow ill have a new kernel to flash.:thumbup:
I think this kernel is butter , except the last freq is a little unstable but it i like it in a whole . its patched to a more current Linux version than NeWsEnSe
Sent from my Galaxy Nexus using Xparent Cyan Tapatalk 2
OP updated :
sweep 2 wake is good now , sorry about that folks , im gonna play around with s2w more and try to move the sweep area to mid-screen to avoid the screenshot : google search mess :good:
Enjoy --- dont forget to thank @poondog for this if you like , i used ALOT of his commits from github for my own kernel
I swear i had to do a double take because i though i was in the Inc S forums!!
THIS IS GREAT NEWS HOLY ****
Nice stuff bsmitty I think I broke some special calling features and the headset mic or something with the beats commits so I'll revert them soon (already done just testing before I push)
I hope you guys enjoy the kernel as much as I am
Any requests are welcome as I'll be watching this thread too
Sent from my HTC Incredible S using xda app-developers app
Fast-Charge poondawg
bsmitty83 said:
OP updated :
sweep 2 wake is good now , sorry about that folks , im gonna play around with s2w more and try to move the sweep area to mid-screen to avoid the screenshot : google search mess :good:
Enjoy --- dont forget to thank @poondog for this if you like , i used ALOT of his commits from github for my own kernel
Click to expand...
Click to collapse
How about top of screen? Middle of screen might just pan left or right...
Sent from my Ascended Dinc2.
MoonMaster345 said:
Fast-Charge poondawg
Click to expand...
Click to collapse
Everyone wants that! I'll work on it
brymaster5000 said:
How about top of screen? Middle of screen might just pan left or right...
Sent from my Ascended Dinc2.
Click to expand...
Click to collapse
I tried doing a build last night using pgm for s2w and it built error free just wouldn't boot , if i can get that , you can define where the slide points are ...
Sent from my Galaxy Nexus using Xparent Cyan Tapatalk 2
poondog said:
Everyone wants that! I'll work on it
Click to expand...
Click to collapse
Cherry pick my repo.
brymaster5000 said:
Cherry pick my repo.
Click to expand...
Click to collapse
Done, just updated to r14 for vivo users
Added force fast charge, thanks
I usually use setcpu but wondering if anyone has found anything better. Seems that one was mentioned with options like voltage changes, gpu frequency over clocks, etc. Maybe I am wrong. Just looking for a change.
Thanks
Sent from my HTC Droid Incredible 2 using Tapatalk 2
shorty1993 said:
I usually use setcpu but wondering if anyone has found anything better. Seems that one was mentioned with options like voltage changes, gpu frequency over clocks, etc. Maybe I am wrong. Just looking for a change.
Thanks
Sent from my HTC Droid Incredible 2 using Tapatalk 2
Click to expand...
Click to collapse
Trickster mod app is about the best your gonna get .
Sent from my Galaxy Nexus using Xparent Cyan Tapatalk 2
bsmitty83 said:
Trickster mod app is about the best your gonna get .
Sent from my Galaxy Nexus using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
+1.
Sent from my Ascended Dinc2.
This kernel breaks audio :/ please fix this
Sent from my ADR6350 using xda premium
felixjohan said:
This kernel breaks audio :/ please fix this
Sent from my ADR6350 using xda premium
Click to expand...
Click to collapse
Gimme like 20 min , as the op states I'm not the original author of this kernel , i had to wait to fix but i got you hang tight
Sent from my Galaxy Nexus using Xparent Cyan Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dorimanx LG G2 Kernel for STOCK 4.4.2 Branches!
NO LOLLIPOP 5.x.x SUPPORT!!! GO AWAY NOW!
Can be used Only for:
D800/1/2/3/5/6 Models!
ALL F320* Models!
LS/VS980 Models!
L01F Model!
My PM box, is for Emergency ONLY! do not send me PM's just because you cant post! that is lame, post something useful and post in thread.
IF you need answers to QUESTIONS not belong to Development???
GO HERE! Q&A THREAD!
OR THIS GREAT INFO THREAD!http://forum.xda-developers.com/lg-g2/help/test-t3032171/post58880406
My kernel was based on LG G2 Stock Kernel v20*/21*.
Kernel Tree is 3.4.108, + LG KitKat updates + my tweaks and lots of tuning!
Global Credits!
Big thanks to g.lewarne for helping me to start!
Savoca for many kernel mods
Cyanogen ([email protected]) for many kernel mods
Faux123 for UV/OV, Sound Gain Control, Inteli Hotplug, Fast Charge support! and more!
Alucard_24 for AlucardHotplug and mods.
LG for Stock kernel base!
MyFluxi for kernel updates and fixes.
To all my sources in GITHUB!
Linus Torvalds for Linux source!
WHAT INSIDE:
Default I/O Scheduling: ROW.
More I/O Scheduling present in kernel: DEADLINE, NOOP, CFQ, SIO, BFQ.
Default CPU frequency: 300Mhz-2.26GHz (MAX OC up to 2.8Ghz speed!).
You can set MIN/MAX CPU Freq in STweaks.
You can set MAX freq for screen OFF state!
Default CPU governor: Ondemand.
More CPU Govs present, conservative, performance, Intelidemand, Intellimm, OndemandPlus, Nightmare, Hyper, Pegasusq, IntelliActive, Alucard, Darkness, Impulse, YankActive.
Support for Kernel HOTPLUG (Intelli HotPlug by @faux123)
Support for Kernel HOTPLUG (Alucard HotPlug by @alucard_24)
Support for Kernel HOTPLUG (MSM HotPlug by @myfluxi)
Support Inteli CPU Temp control (by @faux123)
Support for Touch BOOST CPU'S code (by @alucard_24)
Support for Async CPU, every core can have it's own min/max + cpu governor! (by @alucard_24)
Support 4 GPU Govs! + Tuning in STweaks. (by @myfluxi)
Support limit OC to 2.5Ghz / 2.7Ghz / 2.8Ghz (by @faux123)
Support undervolt/overvolting via sysfs interface/apps interface (by @faux123).
Support using phone as keyboard and mouse for PC over USB! (by @pelya)
You will need APP USB Keyboard! also to enable USB keyboard in STweaks.
CIFS network share mounting supported.
Debugging is OFF by Default to save CPU cycles, and extend battery life.
Internal kernel function fixes (ie, memory leaks, scheduler fixes).
High performance, low latency kernel.
Compiled with -O2 flags and hardware neon-vfpv4 FPU enabled.
Built from official LG v20d/v20E/v20f/v20u/v21p kernel source.
File systems support: Ext2/3/4, FAT32, CIFS, USB OTG.
Support F2FS filesystem!
EXFAT, NTFS supported but need USB OTG APP! it's not native!
WIFI Driver 1.88.60 + Many updates.
Sound Driver Control (Headphones Gain) use Faux Sound App.
Sound Driver Controls for MIC/Speaker Gain via STweaks APP.
Allowed forced fast charge! hack.
Sweep2Sleep! allow sweeping from right to left and backwards! on soft buttons to turn off the screen.
Kernel created using Linaro 2015.xx compiled by me, powerful ToolChain GCC 4.9.3 + all needed mods for it.
Running Scripts from /system/etc/init.d/ is SUPPORTED but OFF in STweaks! if you need it, enable.
STweaks Kernel Control App will be installed with kernel.
Synapse Kernel Control/Status App will be installed with kernel.
Support JDI and LGD Screen types by Auto! (by @dr87)
Added UltraSound high performance audio hardware support.
Added support for MultiROM kexec-hardboot! (by patrik.KT ) (disabled! cant be used for now.)
Added support for relaxed CPU idle functions to save power.
Added support for USB PPP Simple modems.
Added support for USB to Serial adapter. (module).
Added Auto F2FS Mount on boot for /system /data /cache if formatted as F2FS.
Added GPU OC/UC to Max 650Mhz Min 100Mhz (by @neobuddy89)
Added support for KK BootLoader! "BUMPED" kernel so it's official now. from 9.1 kernel only!!!! (by @Cybojenix && @Thecubed)
Advanced Color interface + App (color control) (by @savoca)
Known BUGS!
Post reports, i will fix.
Standard disclaimer:
By installing this kernel YOU will take full responsibility for any damage to your device!
Hardware or software! no one forcing you to install it.
So please do not blame me if you read wrong! or didn't read at all the instructions that i have written for YOU.
But you can feel SAFE to use it, as I test every release on my phone!
Before I publish it for download.
Your warranty will be void by installing custom kernel as my.
This kernel will ROOT ADB Shell!
Global Info About LG Models:
D800 = AT&T Model (Support KNOCK CODE from base 20u)
D801 = US Tmobile Model (Support KNOCK CODE from base 20e)
D802 = International Model (Support KNOCK CODE from base 20b or 20d)
D803 = Canada Model (Support KNOCK CODE from base 20f)
F320* = Korean Model (Support KNOCK CODE from base 21p)
D805 + D806 (same as D802) (Support KNOCK CODE from base 20b or 20d)
LS980 = SPR Model (Sprint) (support KNOCK CODE from base ZVD)
VS980 = VZW Model (Verizon) (support KNOCK CODE by ME!)
L01F = Korean D802 model that missing some parts to reduce cost. (NO KNOCK CODE support!)
if your ROM base is BELOW the Knock Code Base for your model!
use OLD NO KNOCK CODE kernel. or Update your ROM.
Kernel Sources:
KERNEL GITHUB
RAMDISK GITHUB
TO DOWNLOAD GO DOWN!!! YES MORE DOWN...(do i need to repeat?)
How To Install:
You will need to have ROOTED device with Recovery installed!
Refer to other threads for recovery install process.
You can download TWRP Recovery HERE: Recovery Mirror
Download kernel, upload it to your SDCARD, anywhere.
Download STOCK Kernel for your device!
so you will always have it on sdcard in case of any disaster!!!
Reboot to Recovery.
Install kernel as you installed ROM or any mod.
Reboot!
In case that you stuck on boot logo and want to revert to STOCK kernel.
Connect USB Push PWR + Vol Down till phone reboot and you will see LG Logo!
Release and press the buttons again! till you see screen asking if you want to WIPE your device!
if you have recovery installed, then it's will just OPEN the recovery! no WIPE will happen!!!
Just push 3 time the PWR key. and you will be moved to recovery.
Install your device STOCK kernel and wait for FIX.
If you have installed KK bootloader and bumped recovery! to enter recovery from LG logo now have different button combo!!!
With the Kitkat update the process has changed:
Power OFF by holding long the power button till black screen!
Press and hold power and volume down until you see the LG logo then release and press and hold the volume up and volume down buttons until reset screen appears.
it's will ask SCARY QUESTIONS!!!! if you want to hard reset your device!!!
SAY YES/YES!!!! 2 times, then its will show LG logo and boot your custom recovery! in this case the bumped TWRP.
If you have STOCK Recovery!!!! it's will WIPE your device...
Have Fun and report.
INFO FOR USER!!! READ ME FIRST:
LG has started to update all ROM + Kernels with new TOUCH SCREEN DRIVER.
that includes new feature "KNOCK CODE" see youtube!
For now only for D800/D801/D802/D803/F320/LS/VS980 ROMS that have 20B/D/E/F/U/21P/ZVD base!
In download site, you will see kernels with normal version just numbers.
And kernels with "No-Knock-Code" labels.
If your ROM do not support KNOCK CODE on screen OFF!
Then use kernel without support for it!
or you will loose the ability to wake phone with KNOCK KNOCK gesture.
If knock code on screen OFF is supported use the normal build.
Soon all ROMS will have support! all depend on LG and our great ROM Devs.
*About force fast charge. not all devices/models support that HACK.
so if it's not working for you and you are using DEFAULT profile in STweaks.
Then it's NOT WORKING FOR YOU. no need to complain. it's HACK. not LG feature.
If you cant make KNOCK ON to work! visit this site and do all steps till you get it working!
LINK TO KNOCK ON FIX GUIDE
Donation Board:
Meanmike (serious donation!)
P_Toti X4
Iko11 X4
Diechel X4
Pitsgraft X3
Wimmme X2
Androloid X2
Siggey X2
Garfield3333 X2
Rolian X2
SREEPRAJAY
Praveen6585
Flintoast
Iall5tar
Slebit
Osmosizzz
Joschi 744
Citytrader
Asalvi0
Europizza
Desireaftergod
Tanoxxx
Blackline2008
60nine
Maxq1
Zone23
Sqlpro
Emil_b
Detzero
Mehmet184
Cortex69
Ygrec
Pendroz
Ati75
Madmax916sps
Titchener17
Yoyo117
Maxximo88
Steephig
Bender_007
Fire3d
TheFerhatKing
ForeverYoung_ru
**** Gordon
South956
Tarkil
RoboMr.Burns
Ghoulie
Alex1690
Xpiatio
YouhBi
Radzix27
1stichiban
Skoperst
TJ446
Slebit
Leonbadman
gentlemandroid17
Tonyxyz91
Twyn
Br0adband
PlusInfinity
Krenol
Replyme
Formhault
Lycidias
Tomsi91
Bullet92
Tinchoska
Rubendaxter
Runekock
Asterixb
Glpcha
Naomi G. (guest) X2
Ben P. (guest) X2
Alex P. (guest)
Luiz S. (guest)
Arkadiy Y. (guest)
Josue S. (guest)
Aloys G. (guest)
Bjorn S. (guest)
BIANCHI A. (guest)
Brian E. (guest)
Andrea M. (guest)
Krzysztof B.(guest)
German H. (guest)
Alejandro V. (guest)
Anton P. (guest)
Christian S. (guest)
Jessica F. (guest)
Sascha B. (guest)
Carmine M. (guest)
Mirko R. (guest)
Adam R. (guest)
Alejandro V. M. (guest)
Rodney V. (guest)
First banners (user/Contributor) made by @coowkeee
Contributor banner is for people that feel they really made a contribution to any of my kernels!
You can use Power USER banner if you wish
Mirror #1 by Bmbm
Mirror #2 by willflint
Info for Web Hackers,
in my mirrors, there is nothing to take!
My work is public and for the people!
Please let my mirrors work in peace.
Thanks.
Before you Install
Check WHAT model you have downloaded!!!.
Best to use OTA APP by @Diechel
Get it in Google Play
Mirror #1
Mirror #2
Change logs:
16/08/15
Kernel 10.9 BETA
*Merged all SLUB code from 3.10.y + all it's friends!
This code is the heart of memory code, and now we have it 3.10.y!
Many things fixed, many optimizations, and more.
*Merged Vmpressure code maxed to 3.10.y, allow smooth memory performance giving us smooth UI!
*Merged new code for process reclaim that help to reduce memory leaks. and speed up kernel.
*Merged Alucard hotplug and Nightmare,Darkness,Alucard CPU govs updates from DEV.
*Upgraded my build machine to MAX, latest GCC 5.2 and latest python 2.x for kernels. + many other.
*Merged update to LMK, new function added that use vmpressure to kill memory leaking apps when there is high
pressure on ram, for now it's OFF. i need to test it for some time, then i will add new control for it.
*Restored lost RAM for video driver. now all gallery and other apps will be OK.
*Merged lots of other RAM code updates, i am getting close to 3.10.y RAM code!
*Merged more memory optimizations and code fixes.
*Improved memory release after boot, to give all possible free RAM to user.
*Ram is auto growing when not used, releasing leaks and possible LOW RAM bugs.
*Merged many updates to Memory processing code and compaction.
*Merged update for CFQ I/O gov to speedup I/O for SSD storage.
*Merged few fixes for ION memory allocator.
*Merged big update to memory allocation and reservation
and DTC config reading code.
Many things fixed, and new code added. to allow less RAM to be used for
Normal operations. now we save more RAM for other things. like loading
apps faster, and more things in RAM without removing things we need.
*Merged update to Nightmare,Alucard,Darkness CPU govs from DEV.
*Fixed RAM leak, now free RAM will be normal again and not close to LOW RAM 220MB
*Merged fix for NET IPV6 code.
*Merged fix for cgroup define.
*Merged updates to WorkQueue and IDR code from 3.10.y kernel.
*Fixed low memory crashes. by allowing LMK to kill system services and restart them.
To free leaked RAM, also allowed root apps to be killed from RAM.
*Merged Sound Driver fixes for RAM crash and other code, no sound change.
*Merged fix for CMA MEM code release to have free RAM when needed.
*Merged USB code that allow to reduce CPU usage when connected to USB
and no traffic from PC to device. it's can even sleep now. for small time steps.
this reduce heat from charge, and allow more faster charge, as CPU is sleeping.
*Merged fixes to FS code from 3.4.y aurora.
*Merged fixes to smpboot code, fixes NULL pointer bugs with CPU.
*Merged other critical fixes to thread exit code.
*Merged improved CPUIDLE code to remove old bugged one. merged up to 4.2.y main line!
*Fixed MMC fast write mode.
*Removed High Mem is Dirtable option from Dorimanx App and set OFF by default.
to prevent RAM crashes.
*Merged kernel ARM/CPU/RAM updates from 4.2.y main line kernel.
*Fixed restore profiles script, was not always working, now like atomic clock!
*Profiles will be reset on first boot.
*Made with new Linaro 2015.06
*Merged fixes Power on/off API.
*Merged fixes from lowmemkiller RBTREE selection. was mess long time!
*Merged fixes for reboot framework code that will try to alert first if possible
and not just reboot the kernel on drivers subsystems errors...
*Removed changes to MSM CPUFREQ code and set it close to stock to gain stability.
*Enabled thermal control really early at boot.
*Merged MDSS and Camera fixe.
*Merged FS code fixes from aurora 3.4.y kernel. now we can mount/unmount RO our system partition.
before was stuck in RW mode and reduce read performance on system files.
*Merged fixes to alucards cpu govs.
*Fixed power mode script each screen on off.
*Fixed min/max cores control, now will obey the setting.
26/06/15
Kernel 10.8 STABLE
Consider this as LAST BUILD, till other info from me.
*Removed useless CPU stats that no one read or need.
*Cleaned OnDemandPlus code.
*Merged updates to Alucard,Darkness,Nightmare CPU GOVS.
*Merged updates to all Hotplug drivers.
*Fixed bugs in USB drivers.
*Merged RAM protection code.
*Merged lots of Selinux updates!
*Merged lots of NET updates!
*Fixed force fast charge driver.
*Updated LINARO 2015.03 with auto FPU and latest libs.
*Updated all CPU GOVS to more stable per core defines.
*Merged updates to Modem driver and to main android rpm_smd code.
*Fixed MSM RQ STATS not to give ROM hotplug any info when kernel
hotplug is used.
*Merged updates to android RAM code and to LowMemKiller code.
*Merged updates to SOUND and to POWER Code (PM)
*Moved Dorimanx app and color control to kernel zip.
*Updated back light control code.
*Updates to main CPUFREQ code.
*Merged updates to GPU code.
*Merged update to F2FS code.
*Merged updates to MSM watchdog code.
*Removed useless logs spam from dmesg.
*Merged updates to Regulator and MM code.
*Merged updates to Binder code.
*Merged huge update to drivers core code.
*Merged update to BFQ v7r8 driver.
*Merged updates to DMA/CMA Buffer code.
*Merged Adreno Idler for GPU, will save power when screen is ON.
*Merged patch 3.4.108 and missing updates from 3.4.0 to 3.4.1 i was missing them!
*Merged updates to android ashmem code.
*Merged big update to AIO FS buffer code that speedup the IO!
*Merged update to speedup IO by not using code for rotation disks. we have SSD.
*Merged fixed to ramdisk boot scripts and cortex. from my LP kernel.
13/05/15
Kernel 10.7
*Fixed stock music player stuck and laggy.
*Updated OndemandPlus CPU gov.
*Removed MEM leak from system services and HOME app.
*Merged sound driver updates from aurora.
*Removed debug logs that spam dmesg non stop.
*Set max freq to cpu cores on boot, then it's limited to 2.26Ghz. (CPUS boot with 2.26 not 2.8Ghz!)
*Merged fix for GPU freq steps.
*Merged update to USB OTG code.
10/05/15
Kernel 10.6
*Merged updates to Alucard hotpug.
*Merged updates to ExFat driver.
*Fixed Selinux blocking rootfs and brake radio for VS980
*Fixed music tracks delay in switching.
*Updated wget binary to 1.22.1 bionic build.
*Reverted CPU commits that create LAG on wakeup.
*Reverted change to lowmemkill that allow to low ram level and system LAG too much.
*Merged Sound driver update from aurora.
*Merged ARM MSM code updates and fixes from LP source.
07/05/15
Kernel 10.5
*Merged NET fixes from aurora
*Merged Selinux updates and fixed broken sysfs perms, seems like long time was broken!
*Merged MDSS and NET mods from LP source.
*Fixed old mess in sound driver, and merged mods from LP kernel.
*Merged updates to all Alucards CPU govs (alucard,nightmare,darkness) optimizations.
*Restored USB SOUND drivers, and merged LP source updates for USB SOUND.
need to check USB headphones and digital DECK sound stream.
*Merged MEM patches from LP source.
*Fixed all hotplug drivers to set all cores to sleep when entering suspend.
before there was BUG and all cores where ONLINE!
*Merged updates to SHA256/EAS ARm NEON crypto code.
Enabled all ARM NEON optimization drivers! (SHA1/AES 256/512)
*Enabled missing crypto drivers for encryption. need to test!
02/05/15
Kernel 10.4
*Merged updates to Selinux code.
*Fixed BT HD Voice for BT headsets.
*Merged fix for lowmemkill that allow to load more apps to RAM before low mem reached.
*Fixed USB core code, now OTG mouse will work, and many other devices.
*Merged updates to Nightmare, Alucard, Darkness CPU govs, and alucard hotplug from DEV.
many code optimizations and cleanups.
*Merged driver updates from aurora to DIAG,WIFI,QCEDEV,MMC,ARM,USB
*Fixed Force Fast driver code error.
*Merged updates to GPU ION code, and merged GPU fixes from LP kernel source!
*Set ZEN as sleep I/O gov.
*Set nightmare cpu gov on 2 last cores in performance profile.
*Fixed few bugs in boot scripts.
*Fixed busybox install on boot, now it's will clean USER/ROM mistakes.
no more problems about STweaks not running.
24/04/15
Kernel 10.3
*Merged patch 3.4.107 huge update to many drivers and major code. see GIT.
*Merged updates and fixes to SELINUX code.
*When i was updating LP kernel, i have found some errors i made in KK! and fixed that!
in LP branch and KK. also ported few good fixes from LP source made by LG!
*Enabled USB3 support. to allow faster file transfer, and faster charge from USB3.
*Merged fixes to touch boost driver by @Alucard_24.
*Merged code changes for L01F to allow to use KNOCK CODE ROM for L01F.
added full build for L01F and to official NO Knock code.
*Merged fix for mem leak, and qseccom driver and NET LLC fix.
*Corrected ZEN as default I/O on boot.
*Set NET congestion protocol to BIC for F320,L01F,VS980 as with LG stock config.
for others its CUBIC.
have fun testing this build.
it's stable and very battery saving in suspend, it's idling on -10~-5ma thats impossible with any smart phone!
without my kernel!
14/4/15
Kernel 10.2
BETAS 10.1.1 --> 10.1.5
*Replaced sepolicy for f2fs, now we using the LG original with mod for f2fs only. was CM11 binary.
*Set boot scripts to use fstab to mount data or system or both as f2fs in case they formatted as f2fs.
*Fixed bug in boot script that was braking STweaks load in case user set not to load settings on boot.
*Merged fixes and optimizations to Alucard cpu gov and hotplug. and to Nightmare Cpu gov.
*Tuned Alucard and Nightmare CPU govs for response and idle low drain.
*Merged few fixes for SPS driver in MSM code. (Smart-Peripheral-Switch)
*Fixed System not RO when not needed and not RW when needed... was mess there.
*Fixed installing kernel when your system/data is F2FS.
*Updated busybox 1.24.1 from source + Android NDK patches and fixes.
*Added new STweaks sound control: INCALL Speaker gain! now we can boost the incall volume. not depending on headphones gain.
READ the control description before asking!
*Fixed hotplugs switch function, now works as should. in some cases cores where STUCK ONLINE when switching hotplugs.
*Merged new I/O sched. "ZEN" it's fast and tuned for Android SSD storage.
*Disabled hidden bricked hotplug driver, it's needs to be fixed before use. no point to leave it in RAM.
*Alucard optimized all his CPU govs and his Hotplug driver + tuning by me.
*Reverted one change in GPU driver that seems was the scrolling delay bug. we have more gpu steps than default driver.
*Boosted GPU 100Mhz step with higher bus freq. to reduce small lags when min gpu freq is 100mhz.
*Fixed bug with stuck cores when switching hotplugs. added small delay from one to other and cores off function.
Now works as should. very old bug.
*Changed vol to gain descriptions in STweaks XML for sound control.
*Added new Advanced Color interface + App (color control) by @savoca great stuff!
when i have set saturation to 50 inside app, i have finally seen true awesomeness of my screen!
*Updated Intelligent Thermal driver, to use global freq control functions, and clean old deprecated code!
*Fixed LOAD ALL button in STweaks.
*Merged new STweaks app compiled by @krija now it's called DORIMANX simple as that.
*Set ZEN I/O driver as default in all profiles and on boot.
*Merged updates to SPI, SOUND, NET, BAM_DMUX, RQ-STATS drivers.
*Merged updates to Interactive CPU GOV.
*Merged updates to MSM CPUFREQ code including better Power Management code.
reduced deepsleep power use to -5ma!!!
*Merged updates to Alucard Hotplug by DEV.
*Fixed code bugs and disable 2 useless debug logs that no one need.
*Added more checks to charger driver for releasing charger wakelock when no power connected!
*Added boost to I/O using less merge checks and allowed to use different CPUs to finish I/O tasks.
*Fixed small bugs in boot scripts.
NEW changes!
*Merged updates to EXFAT driver.
*Merged better idle dynticks code for fast CPU idling when system is not loaded.
Should save more power.
*Disabled some encrypt custom ARM drivers to be able to use STOCK encryption.
*Merged update to Touch Boost Driver by Alucard.
24/3/15
Kernel 10.1
*Fixed sound gain controls for faux sound app if used.
*Merged code fixes found by arm-eabi-5.0 compiler by google.
*Merged MMC code update.
*Merged MDSS code update.
*Merged fix for input code.
*Merged fix for modem driver packet sync loss.
*Fixed mounting all partitions with F2FS. Final solution that works 100%
We are using CM11 Sepolicy for Selinux modded by me for LG G2 needs.
*Set System Partition to RO when no one need it to be RW. this give as small read speed boost.
*Corrected mirror scripts to fix OTA App version order. thanks to @Computoncio
18/3/15
Kernel 10.0
*Fixed GPU freq steps. now will save more power by working on lower step when no high gpu load.
*Fixed GPU freq stuck after long high load usage and high heat. freq was stuck on 0 freq. and device will reboot
soon or later. not any more!
*Merged big update to GPU driver that allow to reduce RAM use by GPU without any effect, now we can beat any LG G2 average GPU score.
and that not just a score. it's real noticeable performance boost with lower heat from chip.
*Merged many sound driver updates including critical memory corruption fixes.
*Merged new cpu hotplug driver. that needs to be improved and adapted to my kernel. for now it's OFF and cant be selected.
*Merged update to Rmutex code that speedup the code execution.
*Merged FS updates and crypto driver fix.
*Merged latest updates to F2FS driver.
*Merged update to netfilter code.
*Merged new STweaks with great look modded by @krija great work! thanks!
*Created with new LINARO 2015.03 kernel builder GCC.
*Cleaned Synapse controls. now we have MONITOR + basic options in ONE tab. + highlights for titles.
*Merged ARM fixes from Aurora 3.5.y kernel updates.
*Merged power usage reduce code for diagnostic driver.
*Merged fix for CORE power usage in suspend. now less power used in suspend.
*Moved all Sound Gain controls to STweaks! + fixes to PA Gain Control.
Now we can select what app we want to use for sound control.
STweaks (by default) OR Faux Sound. WIN/WIN
*Merged NET updates from Aurora.
*Merged fixes for in kernel Modem driver.
*Merged big update to power charger code from Aurora 3.5.y kernel.
This allow more control of charge by kernel, so battery not get any more power than 100%. so it's prolong battery life.
Also many code fixes and optimizations that may fix wakelocks and other strange stuff that we see in thread sometimes.
*Allowed to kill CROND service.
*Merged updates to MEM code and to lowmemkiller debug code.
*Added 499Mhz CPU freq to enabled freqs. seems to work just fine.
*Fixed LGE Charging scenario wakelock stuck sometimes and preventing deepsleep. now released.
*Fixed MIN CPU Freq reset to 300mhz in some conditions. now will stick to user select.
*Updated all hotplugs drivers and cpu freq limiter with bug fixes.
*Merged updates to Alucard CPU gov and Hotplug from DEV.
*Merged Updated Synapse App by @krija no more popups at start.
*Merged RAM code updates.
*Fixed bugs in boot scripts.
*Fixed F2FS mounting on boot. we must use SeLinux Permissive to boot.
Now it's will auto set to permissive in case we have F2FS partition.
10/2/15
Kernel 9.9
*Major update to kernel locking and mutex code. from 3.14.y stable.
every driver in kernel using this code to work, so it's effect every thing!
*Updates to WIFI to reduce power usage when device in suspend and WIFI ON.
*Updates to RAM code and FS.
*Fixed YankActive CPU Gov. now stable.
*Merged updates to Interactive and Intelliactive CPU Govs.
*Merged updates to USB code and to charger code.
*Merged updates to sound driver code.
*Merged updates to KGSL (GPU) driver code.
*Merged code that allow mounting ISO images as CDROM using app.
*Merged new STweaks app with color mods.
*Rebuild Busybox 1.24.0 + new patches compiled with Android SDK R10D
Now all commands works as expected.
*Fixed bugs on boot with broken STweaks config. Now all load as should.
*Fixed broken min core online set after boot.
*Fixed crond get killed on boot. now works and as root service.
*Small mods to STweaks XML.
*Fixed F2FS partition mounting scripts. (need more work! not booting!)
*Merged sound driver update. for all music lovers! get ready to say WOW!!!
Powerful volume and clearance. Free in ear massage on me!
*Merged Patch 3.4.106 that include TONS of good stuff across many drivers see GIT!
*Fixed warning on suspend with unbalanced IRQ.
*Fixed FM Radio for LS980 model.
*Fixed Nightmare GOV. + tuning.
*Merged updates to SELinux, USB, Regulator, CPUFREQ, WIFI, NET
*Merged IMPULSE CPU Gov. It's based on Interactive but tuned differently.
*Fixed HeadPhones PA Gain (Analog Sound volume booster) now can be controlled via STweaks,
has 2 mods! locked! then it's ON! cant be changed high/low
Unlocked, can be changed high/low ONLY by some ROMS/Devices!!! if you have no effect! set the LOCK back.
and leave it alone.
*Merged VS980 27A LG Source updates to kernel and to ramdisk.
*Updated Interactive + YankActive + IntelliActive from IMPULSE CPU Gov.
*Many merges for sound driver fixes and noise/mic fixes.
26/1/15
Kernel 9.8
*Created using New LINARO 2015.01 kernel builder.
*Merged new updated STweaks by @krija, @Kryten2k35 big thanks for rebuild.
*Merged new CPU GOV, YankActive it's modified interactive, good for battery save, bad for games. (low FPS)
*Merged MEM,MSM,CPUFREQ,F2FS,FS updates.
*Merged new LG LP F320K source updates for now only common good to use code for 4.4.2 ROM.
updates to: MMC, BT, SOUND, NET, SLIMBUS, STAGING, Thermal, Vibrate, Power, base, OF, USB
*Allowed to use 2000ma charge max in force fast charge code. default is 1600 as was.
*Merged GCC Optimization by the book.
19/1/15
Kernel 9.7.1
*Fix Modem/SIM detect for LS/VS980 Models. others have no effect.
18/1/15
Kernel 9.7
*Rebuild LINARO 2014.12 with latest libs and optimized for more build options. (using to build busybox)
*Updated Kernel Busybox to 1.24.0 from source, optimized for my kernel needs.
*Merged updates to sound driver.
*Merged updates to crypto driver.
*Merged updates to ARM, QsecCom
*Merged updates to Camera, LCD Panel, WIFI, Thermal, Binder from 3.10.y
*Merged updates to Memory, CPU, MMC, SCHED, SeLinux
*Added old Busybox cleanup on boot, and add Busybox version show to Synapse.
09/1/15
Kernel 9.6
*Upgraded LINARO kernel builder to 2014.12 + latest GLIBS,C++,LD,Gold addons. and more.
*Merged fix for CPU code that fix possible kernel panic.
*Merged fix for RAM code.
*Fixed stuck PA HeadPhone gain in OFF mode (-6) now speaker and headphones sound is LOUD as should be.
also this fix hissing sounds, should be clean now.
*Added HighSpeed congestion TCP protocol. by request, see GOOGLE.
*Allowed to use low max freq on suspend, min 1Ghz.
*Tuned all profiles with hotplug suspend ON. to reduce power use, see GIT for more changes.
Profile will be RESET on first boot. so change what you like after boot. (take 1min delay before changes!)
31/12/14
Kernel 9.5
*Merged sound driver updates/bug fixes
*Cleaned and fixed Intellimm CPU gov.
*Merged updates to slimbus driver.
*Merged update to BFQ I/O sched v7r7
*Merged fix for main boot code.
*Merged fix for regulator code.
*Merged fix for default LG Hotplug support code.
20/12/14
Kernel 9.4
*Restored lost updates/fixes to core/security/fs/selinux/block
When i was hunting for SOD bug, i had to revert patches to narrow the SOD to box,
and squashed it with big hammer in MMC code!
Now i can restore good stuff back.
*Fixed oldest bug ever from LG source. now all good. (MMC queue code see git)
*Merged Samsung stock patch to: WIFI, TIME, BT, AUDIT, USB, NET all good for us too.
*Cleaned not needed kernel config, and reduced kernel size by 100kb.
14/12/14
Kernel 9.3
Added support for L01F model! first BETA tester told me that it's working!!!
For now without KNOCK CODE. as there is no official KK build from LG!
*Restored WIFI PM control by powersuspend.
*Restored good MMC wake/suspend functions.
*Restored HTC ASYNC function.
*Merged fixes from Alucard to his drivers.
*Merged Sound Driver fixes.
*Merged NET fixes.
*Merged SCHED fixes.
07/12/14
Kernel 9.2
*Updated with 3.4.105 main line patches, major update to many drivers.
*Merged fixes for USB and NET.
*Merged updates to Alucard Hotplug from DEV.
*Removed IRQ code check that may cause SOD on charge.
*Disabled ASYNC code from HTC, no longer needed.
*Cleaned my changes to WIFI suspend, seems it's has already same suspend code.
*Removed some MMC updates that brake LGE structure and create SYNC bugs and hang the MMC, (SOD's that people reported.)
Now should be OK.
*Merged Intellimm CPU GOV, by @faux123 it's based on ondemand. + adapt to kernel and cleanups + tuning.
29/11/14
Kernel 9.1
*Bumped kernel so now it's can be installed on KK/JB Bootloader without LOKI.
if you want to use KK BootLoader you must also update RECOVERY to one that is BUMPED.
see my mirrors for TWRP 2.8.1.1 for your model!!!
if you will flash wrong model! you will suffer!!!! triple check what you got from me before flash!
you can use bumped recovery/kernel with JB bootloader!!! but best to update KK aboot.bin for your model! + all small stock partitions!!!
I have created ONE flash zip with all that needed for D802, including stock stuff from 20D KDZ image.
find for your model, extract needed partitions as in my zip, replace and flash.
too hard??? leave it alone and keep using JB bootloader till you find mind power to do it
*Updated with Linaro 2014.11 GCC 4.9.3 compiled for LG G2 needs by me.
*Merged updates to Alucard HotPlug from DEV with love.
*Merged fixes for QsecCom driver.
*Merged fix for binder to speedup the work via ROM video processor code.
*Merged fix for thermal temp checks.
*Set GPU init power lvl to 320Mhz to prevent SOD after long suspend. it's STOCK set by LG.
*Added fix in touch screen driver for all models from d802 stock update, it's for dual tap wakeup.
22/11/14
Kernel 9.0
*Set Selinux to Enforce as in default, no reason to set permissive for now.
*Merged D801 20g changes.
*Merged workqueue code from 3.9 kernel! it's HUGE update to kernel
major function. that control all works in kernel, all drivers!!!
it's added real speed increase in response and operation.
*Merged sound driver updates.
*Merged fixes for USB Audio critical fixes.
*Merged NET/WIFI updates.
*Merged MDSS (LCD panel) updates.
*Set force charge to REAL possible max ma from charger = 1600.
1800 or 2000 never actually worked.
*Fixed STOCK Hotplug driver.
*Updated all hotplugs + all govs with new workqueue functions.
*Alucard made optimizations to all his drivers. (cpufreqs/hotplug)
*Fixed some mess in BOOT INIT scripts in RAMDISK.
*Fixed wrong min/max cores online after Hotplug Gov switch.
*Merged updates to fix MEM corruption with GCC 4.9.x
14/11/14
Kernel 8.9
*Fixed Low Power mod code to prevent stuck in suspend.
*Merged updates to speed up CPU code.
*Restored BT driver updates.
*Restored LowMemKiller updates + fixes.
*Disabled ARCH POWER, may lead to SOD.
*Merged updates to main CPUFREQ driver.
*Removed mods to MDSS (LCD Panel driver) that caused BLACK screen on wakeup.
*Reduced overhead in Acpuclk driver, idea by @duki994
11/11/14
Kernel 8.8
*Disabled dual kernel boot for now as we have locked boot loader.
*Released 16mb locked RAM to low mem pool.
*Merged updates to OCMEM, BINDER, MMC, ARM, CORE, SCHED, TIME, NET
*Merged lots of updates to FileSystem:
Including FAT,F2FS,EXT4+JBD2, EXFAT, DEBUGFS, + core FS code updates.
*Merged BFQ 7r6 update.
*Fixed GPU OC code. now works very good.
*Merged Alucard HotPlug + Govs fixes/optimizations by DEV.
*Merged OOM code fixed, now mem management is very good.
*Enabled MMC deferred resume to speedup the wakeup.
*Reduced Power Drain by WIFI in suspend.
*Merged updates to kernel modem driver.
*Updated LINARO to 2014.10 build with soft FPU.
*Restored some changes to BT driver, now it's more STOCK. (works good)
*Removed some changes to FS to make the code more stable.
*Found and fixed broken code in sync driver that was stuck
and created SOD from kernel 4.0 till 8.7. now it's GONE!.
*Merged fixes to ARM,LPM,QSECCOM,CGROUPS,USB code.
*Merged new updates to sound driver and sound policy.
*Merged quickwakeup driver that help to resume system fast, and suspend fast.
*Fixed bugs in touch screen driver for all models.
*Fixed CRON service stop.
*Removed FSTRIM CRON, we can only use it with screen on. it's has to sync all data with active system.
*Restored new ROM INIT binary's for all models.
Profiles will be reset.
31/10/14
Kernel 8.7
*Added GPU OC/UC max/min 650Mhz/100Mhz works great.
*Merged updates to slimbus driver for HDMI and others USB devices.
*Merged Update to Sound Driver.
*Merged updates to ARM code + kernel code performance boost.
*Merged fix for useless SYNC to FS during suspend. one sync on screen off is all we need.
*Reduced min brightness in dark.
*Fixes for FAST CHARGE driver.
*Fixes for BT driver.
*Merged GPU driver update.
*Merged update to Alucard Hotplug + Alucard CPU GOV from DEV.
*Reverted LMK updates to fix stability.
*Reverted Kernel tuning to fix stability.
*Reverted some WIFI changes to fix stability.
*Restored Audio Policy to fix stability.
*Fixed Cron bugs in scripts.
*Fixed charge only set on boot for some users of G3 Port. now will be MTP
*Tuned Msm Adreno GPU gov in all profiles.
26/10/14
Kernel 8.6
*Merged new crypto neon accelerated 256/512bit driver.
*Merged fix for microseconds calculation in CORE driver.
*Merged USB MTP connection speedup for file transfers + bug fixes.
*Merged Sound Driver updates from CAF.
*Merged New updates to WIFI driver from Nexus 5 source.
*Merged updates to Alucard,Nightmare,Darkness CPU govs by DEV + tuning.
*Merged updates for Alucard HotPlug by DEV.
*Restored function that needed for LG driver. possible big BUG fix.
*Cleaned CPU STATS Driver, seems was bugged. now all ok.
*Removed fake AC when using USB, it's useless hack, just brake things in ROM.
*Merged updates to global CPUFREQ driver.
*Merged new Alarm Timer driver from CAF and Main Line kernel.
It's responsible for suspend, and fixed many bugs.
*Restored changes to Touch Screen driver that i ported, best to use latest STOCK LG driver.
*Fixed bug in msm thermal.
*Fixed F2FS auto mount scripts, there was BIG mess, and they didnt work!
Now all OK.
*Fixed CROND terminated by kernel as it's was not running from root script.
Now it's protected from kill, same as cortex.
19/10/14
Kernel 8.5
*Merged updates for sound driver.
*Merged updates for CORE code.
*Fixed manual charge lock on 900ma using 1.8a charger.
*Merged updates for SeLinux.
*Added Auto mount F2FS partitions if formatted as F2FS on boot.
*Fixed CRON functions and added calibrate battery every week.
*Tuned Intelli and Alucad HotPlugs.
*Fixed Thermal Core down/up control.
*Added new controls for how many cores can be OFF during high temp.
IF! Core control is Enabled.
*Added HotPlug Live Status is Synapse main tab.
*Fixed Profiles backup/restore
*Made arrangements in STweaks XML to look more clear to understand.
*Fixed Stuck freq on core0 after high pressure thermal test.
will be reset to max on 55C temp.
*Merged updates for Alucard Hotplug. more performance and smart hot-plugging.
*Merged updates to Alucard, Darkness, Nightmare CPU govs from DEV.
Improved freq handling.
*Updated with latest ZVD+ZVE LS980 Source update from LG. it's common code
for all branches.
+Update to NFC driver
+Update to MTP driver
+Update to LCD panel driver
+Update to sound driver
*Tuned Ondemand to be more fast, and respond fast.
*Fixed BUG in OOM LMK driver.
*Moved all Thermal Controls back to STweaks, in new TAB.
Synapse is now for live date state. for debugging. and for fun.
*Fixed Stuck freq on CORE0 after boot. and after thermal event.
*Updated Alucards Touch boost driver + add/remove control for it.
See STweaks.
*Tuned Ondemand gov.
*We now Boot on 2.26Ghz then set by profiles. was 2.8Ghz (version 8.4 only)
*Now ROM thermal alone can handle huge stress test on max TEMP of 77C
for 5 min, that all i tested, i am sure it's can hold hour... just bad for hardware.
*Fixed 1000ms description.
*We now boot on four cores! so boot will be little faster.
*Fixed possible SOD bug on charger overnight.
and when disconnecting power.
*Allowed to charge from USB3 port on 900ma as it's give us that.
*Merged update for Alucard and Darkness CPU GOVS.
*Fixed MIN freq stuck on some freq above 1GHZ
now we can set MIN freq up to 1.03Ghz no more!
we dont need more for MIN freq.
*Fixed BUG in multi core freq set that can cause deadlock = SOD.
*Tuned Alucard HotPlug, now last core will work on stress load. as others.
Improved idle state on one core.
HotPlug is smart, it's not turning all core for a finger swipe... so you will need to stress is a bit to see all cores online.
*Updated ExFat driver, critical bug fixed inside the module.
*Fixed performance degradation when freq reduced due thermal event.
now will be restored back to max every time temp is reduced.
by this boost performance to state of awesomeness!
*Tuned ROM thermal policy to work with 5c temp diff for freq cuts.
*Added controls for Touch boost driver in STweaks.
*Possible random SOD on suspend FIX!
*Disable some not used drivers.
*Added zip binary for zipping kernel log on creation.
so data inside will not be damaged on transfer to me.
*Merged power use reducer code, for CPU, will allow to save more power on idle
or low load.
*Fix slow wakeup from long suspend.
*Fix for Alucard Hotplug suspend function.
*Tuned Intelli HotPlug to perform faster.
14/10/14 5:00AM
Kernel 8.4 (STILL BUGGED!!)
*Fixed kernel Install Script.
*Merged update to Audio Driver.
*Merged new Touch Boost CPU'S code made by Alucard!
much better than old one, it's FAST and less battery drained, but getting
great "Micro LAG" removal.
*Merge Fix for mess in freqs after ROM thermal released from limit. now that
we can control each core by it's it's own freq and gov, ROM thermal made mess.
Now kernel will take care of that mess, and correct all as should be when core
is cold again. under 55C.
*Fixed broken in past freqs in I2C BUS. now all good.
*Fixed not started MTP on boot. now USB driver will be reloaded after boot.
if USB/Charger cable is detected. and by this fix MTP or Fast Charge.
13/10/14 4:41AM
Kernel 8.3 (BUG IN Install Script, deleted from storage)
*Fixed BUG with suspend SOD.
*Fixed Force Fast Charge.
*Cleaned POWERSUSPEND code.
*Adapted install script for old recovery's
*Fixed MSM HotPlug performance drain.
*Fixed CPU BOOST battery drain.
*Added missing sqlite3 for DB optimization cron.
*A lot of work made in RAMDISK boot scripts and Cortex and STweaks + Synapse.
See Ramdisk GIT for more info.
*Profiles and /data/.dori dir will be reset on first boot. to clean old problems.
*New Max freq limit driver added, it's now limit per core, there is no longer need for Global Max Freq limit. so it's removed.
What is set in STweaks, that is the MAX limit per core. no other app can change that.
WAS ADDED BEFORE (SOD BUG)
*Merged updates to PM code from CAF 3.5.y Kernel.
responsible for low power mods in suspend.
*Added FSTRIM also to Cache partition.
*Moved Synapse App from SYSTEM to DATA on kernel install.
*Set SELinux to Permissive on BOOT. seems some ROMS just BUGGED.
and cant take the Enforce MODE. not my problem. now will be OK.
*Fixed MSM/INTELLI Hoplug Suspend function, now it's safe to use for 100%
*Fixed BOOT tuning for MSM Thermal control.
*Added new status to Synapse that show active CORES in LIVE.
*Clean Synapse data when profiles cleaned.
*Link wget binary to /system/xbin/
*Updated refresh times for Synapse status tab.
*Profiles will be RESET on first boot.
*Fixed OndemandPlus CPU gov.
*Fixed Long vibrates bug when typing.
*Added support for Synapse Kernel control app! BIG Thanks to @neobuddy89 for help!
it's like STweaks but can show live data from kernel controls.
for now it's will control the thermal driver.
*Added support for USB Simple PPP modems. (WWAN PPP).
*Added support for USB to Serial adapters.
it's a module that can be loaded by some app for USB adapter.
*Merged fix for CMA RAM pages.
*Merged Multi CPU Policy code by @alucard_24
that allow us to set different freq for each core, and different cpu gov!
All controls are in STweaks.
*Fixed Force Fast Charge and made it super smart!
Now it's will on/off it's self if battery is above 95% to preserve battery LIFE.
as fast charge can in time reduce battery life if used till 100%
Will charge fast when in ON state, or Manual state.
also added MAX 300mA as requested, to force slow charging to prolong battery life, if fast charge is not needed.
*Merged fix to alucard hotplug from DEV. will improve hotplug performance.
*Merged kernel code alignment fix.
*Merged some new functions for kernel drivers future use.
*Removed old panels hack, as JDI/LGD panels fixed on kernel install.
*Fixed GPU update button in STweaks.
*Added copy of /data/.dori/ files to /data/.dori_bkp folder before profiles reset!
In this new build profiles will be reset on first boot!
*Added Anti Fast User function in boot script, that will not allow user to open STweaks till it's service loading controls, to prevent BUGS and mess.
User will be denied access to STweaks till all ready!
*Added SElinux control to STweaks Other Tab, you can set Enforce or Permissive.
*Added File System TRIM support! will be run on boot!
And user can push TRIM NOW in I/O Tab in STweaks. if it's show 0 then all was OK.
Also we can now set to run TRIM on /system + /data
every day at 6:00AM in CRON Tab, active by default!
*Removed not used tuner modules from kernel image.
04/10/14
Kernel 8.0.1
*Fixed possible BUG that make SOD on charge, phone alive but screen is black.
*Merged CPUFREQ fixes that improve performance.
*Added new tweak to STweaks Hotplug tab. now cpu boost duration can be tuned.
Kernel 8.0
*Merged updates for CPUFREQ and SCHED CORE code.
*Merged HUGE update to Power Manager and QOS Code.
*Merged big update to ARM code and CPU code + L2 CACHE speedup fixes.
*Merged update to MEM code power suspend.
*Merged updates to USB code.
*Merged Updates to CRYPTO code.
*Merged HUGE update to CPUIDLE code.
*Fixed Force Fast Charge code. now will charge fast.
*Merged HUGE update to Kernel IRQ distribution Domain.
*Merged update for Security Keys code.
*Fixed PowerSuspend delaying screen wakeup.
*Merged HUGE update to FileSystem code and Kernel System code.
*Merged NET code update.
*Tuned MSM and Intelli HotPlugs now will hold steady on idle. not jumps.
*Reduced Debug code that slowed kernel by 10%.
*Fixed stuck SuperSU service on boot.
*Added new control to STweaks, that allow to use faster kernel workqueue
or more power saver.
*Fixed power drain in IDLE/Suspend.
OLD CHANGE LOGS MOVED TO PAGE 3
XDA:DevDB Information
[KK 4.4.2 Kernel 3.4.108][16 AUG] Dorimanx 10.9 LG G2 D80*ALL! F320 LS/VS980 L01F, Kernel for the LG G2
Contributors
dorimanx, alucard_24, neobuddy89, Diechel, Computoncio, d_Schizzo, vPro97, bloof, siggey, Tinchoska, cybernetus, johnbeetee, xanthrax, berryman13, Ganjax, jeebspawnshop, g.paganini, blastagator, krija, Kryten2k35
Source Code: https://github.com/dorimanx/Dorimanx-LG-G2-D802-Kernel/commits/LG-STOCK-KK
Kernel Special Features: Read the What Inside.
Version Information
Status: Stable
Current Stable Version: 10.8
Stable Release Date: 2015-06-26
Current Beta Version: 10.9
Beta Release Date: 2015-08-16
Created 2014-11-22
Last Updated 2015-08-16
Reserved
One space for me.
Good Info for users!
For all who don't have the "KNOCK ON" after flashing kernel,
or have some touch problems...
please try to go to your hidden menu 3845#*80X#
there to Settings and "update touch Firmware"
WAIT! don't panic!
try if knock on then works.. and touch problems fixed.
Kernel has new touch screen firmware inside.
FUNNY PICKS POSTED IN THREAD:
OLD CHANGE LOGS:
26/09/14
Kernel 7.9
*Updated with 3.4.104 main line patches.
*Fixed BoostPulse for Intelliactive + Interactive CPU Govs + code updates.
*Updated LINARO kernel builder self made to 2014.09 build.
*Updated MSM RQ STATS code to better support Default HotPlug
Now much more relaxed and stable on CPU control.
*Fixed Force Fast Charge code from resetting low power mode when battery is full to FAST Charge and by this can BUG the kernel and prevent wakeup.
Now code is more smart and stable.
*Merged HUGE update to CPUIDLE code that responsible for CPU sleep and power up on need from IDLE to full power and fast back to idle.
Code is very complicated and many bugs are fixed with this huge port from 3.10.y tree.
*Merged HUGE update to Power Mode Domains, this code responsible for powering down drivers on deepsleep and waking them on wakeup.
Many bugs are fixed and many new things added that make this code a lot faster and safe.
*Merged updates to persistent RAM driver.
*Merged code updates to SCHED CORE.
*Merged performance boost code for Cortex A15 CPU that we have!
If you was thinking that all was fast, well you will be surprised to see how fast it is now!
*Merged serious update from TEGRA 3.10.y kernel for CPUIDLE relaxation.
this code will help to save power when CPU is not loaded, so kernel will idle much better and not looping useless CPU cycles. when there is nothing to do.
*Merged SMP and Unalligned patches to speed up the code process.
*Merged CGROUP protection patch.
*Fixed App Debug button in STweaks. (not really needed for kernel debug)
21/09/14
Kernel 7.8 STABLE MILESTONE.
[/B][/U][/B][/U][/B][/U][/B][/U]
*Merged many updates to Audio Driver and to USB Audio driver.
*Merged updated to CORE, ARM, SMP and MEM. performance is great, and RAM leaks destroyed.
*Merged update to GPU driver, GPU mem leaks removed.
*Merged updates for WIFI.
*Merged updates to Qseecom driver.
*Merged updates to alarm driver.
*Merged updates to MMC driver.
*Merged updates to Diag driver.
*Fixed old bug in kernel/fork.c
*Merged NET updates.
*Merged latest Seccomp driver.
*Merged updates to android binder.
*Merged updates to OTG driver.
*Fixed many bugs with profile selection and hotplug activation.
All profiles will be reset on first boot, and /data/.dori folder cleaned.
*Made some code cleanups in kernel and ramdisk.
*Fixed Cortex script and other ramdisk scripts.
*Merged headphones detect fix.
*Merged ARCH updates.
*Updated audio policy + enabled USB Audio, Sound is great!
*Improved CPU thermal config.
17/09/14
Kernel 7.7
*Reworked Intelligent Thermal Driver.
It's now bug free and working great, can be stop/start and tuned.
*Merged updates for Sound Driver headset detection code.
*Fixed Default HotPlug not starting after switching from other hotplug via
STweaks. now all OK.
*Tuned MSM HotPlug to be less aggressive, will not pop all cores for nothing
on freq jumps.
*Restored default LG voltage for touch screen. was 2.7v as min, now 3.3v
It's should help with touch response and knock code/knock ON. Possible even make the wakeup faster.
*Merged fix for WIFI driver, less power used by wifi driver when it's OFF, but driver is waiting to be turned ON.
so now one less routine running even when WIFI is OFF.
*Merged more conservative load calculation for default hotplug driver.
its help default hotplug to decide if to turn cores ON or NOT on low load request.
and by this save power. it's still not WOW but better than was,
other kernel hotplugs are still much better.
*Merged update to diagnostic driver for ROM/KERNEL operations.
*Made some cleanups in ramdisk and adaptations to new changes in kernel.
15/09/14
Kernel 7.6
*Fixed suspend battery drain. now will be less.
*More updates to audio driver + fixes for headsets.
*Update to audio policy that now allow more sample rates to DSP.
Sound is GREAT!
*Merged updates for Selinux and CPU core.
*Merged latest F2FS driver updates.
*Enabled ROM hotplug service without the hotplug, as it's doing other ROM/Power
functions, and we had it OFF long time now... same as thermal for camera...
*Restored default latency for all models, CPU power increased.
*Made small cleanups in kernel and ramdisk.
12/09/14
Kernel 7.5
*Fixed sound hissing in low end headphones/headsets.
*Enabled HIFI performance code for all formats to fix sound.
*Fixed HIGH speaker sound on boot animation.
*Merged new thermal control core by Faux123 and converted it to
Intelligent Thermal Control! it's super fast and holding temp just awesome.
not letting any overheats to happen.
*Allow to set MIC gain to -40 as requested by users.
*Fixed Default HotPlug not activated on boot if selected as default.
*Updated Sound Control code by faux123 to 3.6 build.
*Merged code to reduce I2C bus source freq from 50Mhz to 19Mhz
it's will save power.
*Merged code that will allow us to use Mutli ROM recovery and switch kernels online! and boot to secondary ROM. for fun!
Now we need to wait till recovery is finished and we will be the first LG G2 dual boot users!!!
*Merge small fix to kthread work that help to reduce useless jobs in kernel.
08/09/14
Kernel 7.4 (SOUND BUGGED)
*Fixed low/high sound bugs. now music will be clear, and incall will be loud.
*Merged memory leak fixes for logger code.
*Merged Support for MIUI KK STOCK Base ROMS.
*Allow to set CAMERA and Incall MIC to -30 in STweaks to allow sound record in concerts.
*Fixed Analog Power Amp gain control in Faux App.
05/09/14
Kernel 7.3 (sound bugs, but stable)
*Fixed CPU Hang BUG added at 7.2 kernel...
*Merged FIX for BT memory leak.
*Merged Sound Control driver rewrites + mods.
Now default headphones + in call speaker gain will be 2.
*Fixed back light Control mod. now will do change only if device in dark room.
and will not cause back light flickering when LUX is above 100 (bright room)
*Allowed to use ONLY Intelligent Thermal control and set safe TEMP controls.
BUT when using ONLY Intelligent Thermal control camera app will close longer!
Cant fix that. ROM thermal is CLOSED source binary.
*Now Analog PA setting via Faux Sound app will STICK. and not reset to default when no sound playing.
If you have no change modding the PA gain, then your hardware/Software
is supporting only PA on/off and it's set ON by default, no min/max.
And we cant turn it OFF.
This is how my hardware/Software behave.
04/09/14
Kernel 7.2 BUGGED and Deleted
*Merged fixes for sound driver.
Now high performance mode will be active only for HIFI sound music above or equal 96khz.
So we can save power using normal sound tracks.
Also some fixes for FauxSound Analog Gain control.
*Merged fixes for CPUFREQ global driver. mainly fixes from main line.
*Merged fixes for OCMEM from CAF.
*Merged MMC update.
*Merged latest F2FS driver. not used for now.
*Merged performance boost mods.
*Added new tuning in STweaks Other Tab that allow to set MIN backlight
in full darkness. some users reported too bright when using AUTO brightness.
well now it's can be VERY dark read instructions in STweaks Control.
*Profiles will be reset on first boot to include new tweak.
*Removed commit that may have been responsible for some SODS
people had before.
22/08/14
Kernel 7.1 STABLE MILE STONE.
*Merged fixes for MSM/Intelli/Alucard HotPlugs to allow them to work
as should in Awake/Suspend mode! no more SODS caused by them.
*Allowed to set Speaker Gain max to 20, if that is needed.
*Updated LINARO 2014.08 Toolchain kernel builder, compiled by me and tuned.
*Merged fix for WIFI driver.
*Merged update for CPU BOOST driver, will help in wakeup speed.
*Merged updates for Nightmare,Alucard,Darkness CPU GOVS from DEV.
*Merged fix for sound driver.
*Fixed long vibrates when typing fast, now much less frequent, one in 20~30 clicks.
18/08/14
Kernel 7.0 STABLE
*Updated with 3.4.103 main stream patch.
*Tuned Interactive gov.
*Added new Sound Policy config to allowed higher sample rates
to go via hardware decoder.
*Merged Sound driver updates.
*Merged fix for low mem killer code.
*Disabled useless kernel config for all models.
*Merged small fix for WIFI.
*Added new control for HotPlugs to STweaks, it's allow to suspend hotplug when screen is OFF, or not (default) we had is SUSPENDED!!! for 5 versions now.
So i suspect that all SOD reporters have device/rom not compatible for hotplug suspend.
and other MANY other have 0 problems... so it's not suspended by default.
this will also help with faster wake up on In Call. but may use little more battery when screen is OFF and sleeping... test and see.
*Profiles will be reset after boot, once.
12/08/14
Kernel 6.9
08/08/14
Kernel 6.8 STABLE!
*Merged HUGE update to SCHED CORE and RCU code from 3.10.y Android MSM CAF.
Apps open faster, many bugs fixed, CPU cores working great, and much more.
*Merged many Suspend updates to get rid of wakeup problems.
*Merged updates to Interactive CPU gov.
*Fixed PowerSuspend code messing with LCD panel wakeup... should fix all sods.
*Added ability to set max 3 cores online in STweaks (Triple Core)
*Merged many USB updates, that include better file transfer and bug fixes.
*Merged GPU (KGSL) updates.
*Patched with 3.4.102 main stream patch.
*Fixed sound noises when using old decoded files or low sample rates.
*Merged Sound Driver updates.
*Merged HDMI updates.
*Merged MMC Updates.
*Merged Power Manager updates and timekeeping!
*Fixed old bug in suspend code.
*Updated ONDEMAND CPU gov + Tuning.
*Merged NET and WIFI updates.
*Uploaded one more build for VS980 without knock code support. i hope it's will work for people without ROM that support Knock code.
04/08/14
Kernel 6.7 STABLE for 95%
*Restored all MMC updates from CAF.
*Restored all Qseecom updates + new fixes from CAF
*Merged many new sound driver updates from 3.10.y CAF.
*Merged NET fixes and other misc system updates.
*Restored CMA updates and ARM updates.
set 16MB allocated for drivers only to speedup kernel operations.
*Restored all GPU commits to fix GPU power controls and many bugs.
*Restored Wireless TV driver updates.
*Restored CPU code updates and cleanups.
*Restored OCMEM updates and cleanups.
*Restored GPIO updates.
*Restored IOMMU updates.
*Restored SCHED CORE updates.
*Merged update to Intelliactive CPU GOV by faux123
*Merged sound driver control updates to ver 3.5 by faux123
and fixed sound controls lock for LG sound driver.
we dont loose STweaks tuning after using Faux Sound App any more.
So what you set in STweaks is now sticking till reboot. no matter what.
*Merged update to Interactive CPU GOV.
*Merged small camera driver update.
*Merged small LED control fix. help with stuck leds, no more...
*Restored Audio Policy config file with new controls and sample rates
and support for offload and compression and latency fixes.
02/08/14
Kernel 6.6 STABLE!
*Merged new updates to Alucard/Nightmare/Darkness CPU Govs.
*Merged new updates to Alucard HotPlug.
*Reverted MSM/INTELLI/CPUFREQ LIMIT usage of LCD Notify for suspend!
Suspected as the SOD maker! now it's will use powersuspend as was with 5.9
*Installed patch 3.4.101 from main line.
*Restored Random number generator and sync it with 3.16.y kernel code.
*Fixed AC3 decoded files, noise when playing music. i dont hear any noise!
*Restored MSM/INTELLI HOTPLUG and CPU-BOOST tuning.
*Restored Thermal Tuning.
*Restored CPU boost commits.
This kernel has all that was restored in 6.5.4 and more fixes.
30/07/14
Kernel 6.3/4/5.1 (Deleted bugged)
25/07/14
Kernel 6.2 STABLE.
*Big update to Random Generator (Entropy) from 3.16.y kernel!
This allow fast random data generate used by kernel or APPS/ROM
*Merged updates for KSGL (GPU) Driver.
*Merged many new updates for Sound and HeadSet drivers.
*Reverted USB Audio drivers to STOCK, after reports that it's was broken.
*Big update for MMC (internal storage) driver from CAF and Nexus 5.
*Merged updates for qseecom driver.
*Merged new ZVD LG Source update for LS980 Knock Code support!
and new touch screen firmware. all new ZVD base ROMS can use this kernel.
Others use OLDER NO Knock build.
*Merged big update for LowMemKill driver from CAF and Nexus 5.
Now it's much more smart and relaxed, not killing apps without need.
you may see less free RAM, but it's all under control!
*Fixed some NET bugs i have found.
*Merged updates for ARM code from CAF.
*Merged many new updates for Ondemand GOV, it's rewritten!
and much more smart and efficient!
some controls removed as they are no longer needed.
*Tuned Touch Boost driver.
*Tuned new Ondemand.
*Found working wget binary and restored AD-Block update via STweaks and kernel version check!
*Fixed some small bugs in STweaks scripts.
*Improved deepsleep power usage and performance when active.
*Possible fixed the strange CPU HANGS in some different conditions.
*Found out that if one of the CPU cores overheat too much! it's shutdown and will not work any more till reboot, this is hardware protection!
so if you see that one of your cores have 0Mhz when it's online. you burned it too much!
reduce MAX cpu temp in STweaks for 2C less.. and REBOOT.
Now all CPUS can handle high temp! this why Default profiles and lower have 78C max.
19/07/14
Kernel 6.1
*Updated LINARO 2014.07 toolchain for kernel building, personally compiled by me.
*Updated with patch 3.4.99 from main stream.
*Updated Qseecom driver from CAF, responsible for secure communication from ROM to Kernel.
*Updated Crypto driver. faster and with less bugs!
*Major update for USB Audio driver.
*Merged major update for sound driver from CAF and Nexus 5,
now we have high performance hardware decoding support!
and that help to reduce CPU usage when playing super heavy sound files!
for example i can play FLAC 192khz/24bit file (350mb just 9:00min)
and when screen is OFF, CPU is at 300Mhz one core!
and playing without any problem! when screen is ON it's jump to higher freqs
but again much less than was.
So playing music now use less power! and quality is great!
*Merged new CODEC support for WMA,MP2,ACC via DSP processor.
*Tuned max CPU temp on boot to prevent reboots when CPU is too hot,
for some models / low quality CPU chips.
*Tuned Ondemand GOV to provide balanced power/battery save.
as people reported higher drain. now should be good.
don't expect high score in bench apps, no need to post this junk.
*Tuned Touch Boost driver to provide better performance.
*Merged updates for modem driver.
*Merged updates for BT driver.
*Merged updates for Interactive CPU gov.
*Merged update for reboot code.
*Allowed higher speaker gain in STweaks! up to 15. (use in your own risk!)
*Boot D800 with older INIT till new one will be available from LG.
*Tuned MSM Hotplug to balance performance.
*Added new Button in STweaks under Force fast charge,
it's allow to reset battery fuel gauge, and allow recalibration.
if you think that % that you see is not right, push that button, and it's should
drop/rise or stay as was, than it's OK.
after this allow full charge and discharge. don't play with this button too much.
it's reset battery calibration in kernel.
*Fixed Profiles backup/restore function in STweaks.
15/07/14
Kernel 6.0
*Fixed BT connect delays.
*Merged major Sound Driver update from CAF and Nexus 5!
Including improvements to Ultra Sound (192khz 24bit) audio drivers.
and many fixes for protecting kernel from crash and compatibility with different headsets.
*Merged CORE, MEM, CMA updates.
we lost 16MB from total ram that now allocated for drivers, this allow much faster kernel work, as ram already free for drivers and no app can touch it.
*Fixed stereo call recording support.
*Added new option to STweaks to control CPU gov sample rate.
*With help from @Formhault now STweaks control descriptions are written much better, and typos fixed.
*Fixed WIFI wakelock drain.
*Update to Alucard CPU gov by DEV.
*Thanks to @pendroz we now have updated RAMDISK binary's from 20D and 20F STOCK kernels!
For all Knock Code supporting models.
*Headphones volume boosted! make sure you have normal volume set before use
it's much more clear and powerful now.
11/07/14
Kernel 5.9 (STABLE)
07/07/14
Kernel 5.8
04/07/14
Kernel 5.7
*Added auto FIX for panel type! on kernel install! thanks to @dr87
now JDI panel type users will get fully working LCD panel! no white lines!
No need to flash any modded kernels or use any MOD zips to set panel.
*Merged updates to camera driver.
*Merged Critical fixes for NET and ROW I/O sched.
*Merged fixes for Interactive Gov.
*Merged critical fixes for GPU driver! GPU performance increased.
*Merged new encryption driver, for now just there for future use by some app.
*Merged update for LCD panel that allow brightness change even if no GPU activity!
when nothing moved, brightness was stuck as last set, even if needed. delay was small... but now it's gone!
*Merged LCD driver update to suspend faster, will save power on screen Off.
*Merged fixes for MMC driver all about power suspend when not used.
*Merged fixes to Modem driver.
*Merged fixes for CPU drivers.
*Merged update to MSM CPU FREQ Limiter code. now more optimized.
*Merged new driver for stream synchronization during capture and playback.
*Fixed typos in STweaks descriptions.
I will not release any more updates for D800/1/2/3/F320 without knock code!!!
All Roms have the base updated! so time to update your ROM.
No knock code base is end of life. if you cant update use 5.6 kernel.
02/07/14
Kernel 5.6
23/06/14
Kernel 5.5
21/06/14
Kernel 5.4 (deleted! CPU freq stuck BUG)
20/06/14
Kernel 5.3 (deleted! CPU freq stuck BUG)
15/06/14
Kernel 5.1+2
05/06/14
Kernel 5.0
01/06/14
Kernel 4.9 reported battery drain higher than before.
23/05/14
Kernel 4.8.1
17/05/14
Kernel 4.7 STABLE
10/05/14
Kernel 4.6 STABLE
06/05/14
Kernel 4.5.1 (D802 ONLY) STABLE
*I have restored one missing config file for D802 in ramdisk.
it's responsible of NET tweaks and default brightness settings
and mounting /cust partition and some other small stuff.
best to update, but it's not CRITICAL right now patch...
Kernel 4.5 STABLE
02/05/14
Kernel 4.4
29/04/14
Kernel 4.3.4
Kernel 4.3-No/Yes-Knock-Code
22/04/14
Kernel 4.2
*Removed NET tweaks from kernel scripts.
*Fixed broken ROOT, by removing the root/unroot options. no needed any more.
we all have ROOT any way.
*Fixed NET problems in all branches + added missing NET code to D803 branch.
*Updated Busybox to support kitkat + fixes.
*Fixed my booting scripts to mach new kernel PATH to controls.
*Fixed SElinux code.
*Updated logger and binder from main line.
*Fixed Reboots.
*Fixed Alucard HotPlug power code.
20/04/14
Kernel 4.1 first public Alpha Build!
*Kernel based on D800/2/3 20E Source!
*I have merged all the cool stuff from my LG JB kernel
See what inside list!
*Kernel is in high Alpha test stage! but it's STABLE
and working good on STOCK Builds.
*This kernel not supporting CM/AOKP ROMS!!! STOCK ONLY.
*If you loose ROOT after kernel install, download SuperSu 1.94 zip and install via recovery!
link Provided in Know Bugs!
I will fix it till next release.
For now post ALL in this thread till Q&A thread will be UP!
have fun.
Sweet! I've been waiting for this, thanks a LOT, you're great!
Ladies and gentlemans, the moment what are we waiting for .. RELEASE THE KRAKEN
ohhh yes!! =)
THanks again buddy!
anddd here it is
:good::good::good::good::good::good::good::good::good::good:
i'm dancing with joy !
i will edit this post always when i try a new dori 4.4.2 kernel stay tuned for my review ill flash as soon as i get home
and here we go.
flashed 4.1 V on cloudypro 2.0 and booted jsut fine, had to flash supersu as u meantioned to get the root working again.
Finally ...!!!
Yes we came to our new home
First Feedback
Has minor lag Default settings ( Felt in on the lock screen ) ?
Savoca kernel everything smooth ( Same rom )
Yeah！great to see your KK Kernel here ！
pendroz said:
Yes we came to our new home
First Feedback
Has minor lag Default settings ( Felt in on the lock screen ) ?
Savoca kernel everything smooth ( Same rom )
Click to expand...
Click to collapse
On wakeup right? Its the super freezing of all drivers and power efficient code.
Its make the wakeup with small lag, but save power like nothing else.
-9ma in hour on deep sleep. Its 0.3%/hour savoca kernel can do that?
Any way i can tune that. Or switch to intelli hotplug or alucard. Much faster than stock binary code. In rom.
Sent from my LG-D802
Cool, let me be the first one to start the whining
On cloudypro2 with stock kernel I was suprised about the low amount of wakelocks, my 802 was awake for about 8% with 1013 audio stuff being the biggest consumer. With the first KK Kernel waketime suddenly went to 28% Android-system topping the list.
Will try 2nd built now
I flash it to cloudy pro2 and lost root
Antunhr said:
I flash it to cloudy pro2 and lost root
Click to expand...
Click to collapse
Read first page under: known bugs
Antunhr said:
I flash it to cloudy pro2 and lost root
Click to expand...
Click to collapse
Just download the SuperSU zip from chainfire and flash it. I had the same problem and this worked perfectly.
Trimis de pe al meu LG-D802 folosind Tapatalk
Yes.. i didnt reed all treat my mistake
Antunhr said:
I flash it to cloudy pro2 and lost root
Click to expand...
Click to collapse
Read 'Known Bugs' Section in OP
Moved it into my Rom Thread
Vision Kernel for CyanogenMod 12.1
fast - smooth - battery friendly
Features
Hotplug
MpDecision (optimized)
IntelliPlug 4.0
Thermal
My own Thermal Driver (for this time but not the end)
CPU
Underclock CPU to 268MHz
Overlock CPU to 3072MHz (only OC Edition)
Hardlimit CPU Control 2.2 (only OC and NOC Edition)
CPU Boost (only AUX Edition)
MSM Turbo (like Intel Turbo Boost - only active if you use max freq from kernel)
Voltage Control
more CPU Governor
GPU
Underclock GPU to 166MHz (only OC Version)
Overclock GPU to 800MHz (only OC Version)
Simple GPU Algorithm
Adreno Idler
more GPU Governor
Idle down to 27MHz
Screen
Touch Control (DT2W, S2W)
LCD Notifier / State Notifier
FS and I/O
Dynamic Fsync
more IO Scheduler
Optimized EXT4
Power
Powersuspend 1.7
Fastcharge 1.2
Power effient workqueue
Arch Power
Sound
Faux Sound Control
MSM Ultrasound
Stereo call recording
Net
more TCP Cong
Misc
KSM
Kernel Mode NEON
Kali Nethunter Support
SELinux permissive
overall Optimizations
vfp Hardfloat
Sabermod 4.9.3 for A15 and graphite
more...
oc = CPU and GPU OC | noc = no OC | aux = no OC + with CPU Boost
Download
XDA:DevDB Information
Vision Kernel Rebased | fast - smooth - battery friendly, Kernel for the Samsung Galaxy Note 4
Contributors
AuxXxilium
Source Code: https://github.com/AuxXxilium/android_kernel_samsung_trlte
Kernel Special Features:
Version Information
Status: No Longer Updated
Current Stable Version: 3.0
Stable Release Date: 2015-06-29
Created 2015-06-02
Last Updated 2015-07-05
Changelog
3.2
Thermal Driver update to make it cool
3.1
add my own Thermal Driver
remove IntelliThermal
remove CPU Boost - we have Hardlimit Control with Boost
some fixes
3.0
MSM Turbo added (like Intel Turbo Boost - only active if you use max freq from kernel)
LCD Notifier added
State Notifier added
Set Andreno Idler to use State Notifier Suspend and Powersuspend
Touch Control added (DT2W, S2W)
some KGSL Patches
2.0
fixed the CPU freq bootup problem
removed some boost features from samsung - i think Hardlimit Control can do this
mpdecision updated
I/O scheduler tuned a bit
faster wakeup from suspend (about 80%)
1.0
rebased with features above
Misc
How-To install
remove all bootup settings from Fauxclock
boot into recovery
install kernel
wipe cache (better to do this)
boot system
if system is fully started - restart it again
done
FAQ
How can i set the kernel features?
The recomend app is FauxClock. Other apps can have problems with cpu freq setting or other features.
Fauxclock isn't supported.
Install Fauxclock > Open and accept SuperSu > force close it > open again (if this isn't working, you need to fix permissions.)
Why i do this? ETA's?
It's only build for my own use, so i update it if i think i must do it. Please do not ask for ETA's.
Misc
Known bugs
If you found a bug, please submit it here.
Feature Requests
If you want to have a new Feature, please submit it here.
Reviews
If you like my work, please say THANKS and write a short review here.
Can't wait to test it out, nice work :good:
Can one OC on this kernel? Thanks!
iGordy101 said:
Can one OC on this kernel? Thanks!
Click to expand...
Click to collapse
no that's the only thing that never come into this kernel. the device is hot and fast enough.
Firstly, thanks for releasing this. Really appreciated.
Any chance of adding Kali Nethunter support? I do some pen testing and would love to be able to use it.
happytomato said:
Firstly, thanks for releasing this. Really appreciated.
Any chance of adding Kali Nethunter support? I do some pen testing and would love to be able to use it.
Click to expand...
Click to collapse
U need patch for cyanogenmod to use kali. So support is not useless.
Is this for qualcomm or exynos?
3473 said:
Is this for qualcomm or exynos?
Click to expand...
Click to collapse
Qualcomm.
Sent from my SM-N910F using XDA Premium 4 mobile app
Have the Kernel intelli thermal?
I didn't tweak anything (just installed the kernel) and my phone feels a lot smoother, thanks!
blackline2008 said:
Have the Kernel intelli thermal?
Click to expand...
Click to collapse
vision_0.29 has intelli_thermal 3.0
Thanks for it. ☺
EDIT
Hello, until now the kernel is running smoothly.
Only when I activate "GPU Thermal Control" the device reboots.
It doesnt work in aicp ROM
blackline2008 said:
Thanks for it.
EDIT
Hello, until now the kernel is running smoothly.
Only when I activate "GPU Thermal Control" the device reboots.
Click to expand...
Click to collapse
i look into it, the next days.
rafik25 said:
It doesnt work in aicp ROM
Click to expand...
Click to collapse
it is build with CM12.1 ramdisk. so the only rom that will work everytime is CM12.1. all other not supported by me. i build it for my own but thought i can share it with the community.
Interesting project, will download & see how it goes :beer:
Was mpdecision removed in favour of better battery life?
AuxXxilium said:
vision_0.29 has intelli_thermal 3.0
Click to expand...
Click to collapse
Intelli thermal causes a reboot on my phone when it gets hot enough to activate. I've never managed to make it work on note 4 though. This kernel sleeps so well. So much better than anything else. Great work. Keep it coming!
Sent from my SM-N910F using Tapatalk
notegalaxy said:
Intelli thermal causes a reboot on my phone when it gets hot enough to activate. I've never managed to make it work on note 4 though. This kernel sleeps so well. So much better than anything else. Great work. Keep it coming!
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
does it work or have you random reboots with intelli thermal?
notegalaxy said:
Intelli thermal causes a reboot on my phone when it gets hot enough to activate. I've never managed to make it work on note 4 though. This kernel sleeps so well. So much better than anything else. Great work. Keep it coming!
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
Bro what's your kernel configuration settings?
Disclaimer
Code:
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because someone threw a POTATO at you. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
NEMESIS FUSION KERNEL
For
ZENFONE 2 LASER
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features :
This One Is Long So Better Hide It 1.)Built with latest Uber-4.9-kernel Toolchain
2.)Advanced TCP Algorithms for TCP Congestion Control
3.)Westwood TCP-Algorithm as default.
4.)Works On any CM based ROM(CM13,RR , Temasek CM13etc)
5.)11 New Tweaked & Tuned Governers for various Workload(Heavy,Low,Gaming etc)
Code:
[b][u]List of New Governers[/u][/b][list=1]
[*]elementalx
[*]hyper
[*]impulse
[*]intelliactive
[*]interactiveX
[*]lionheart
[*]pegasusq
[*]slim
[*]smartassH3
[*]smartmax
[*]yankactive
[/list]
6.)4 New IO-Schedulers For Various Workloads
Code:
[b][u]List Of New IO-Schedulers[/u][/b][list=1]
[*]Sio
[*]Fiops
[*]Zen
[*]Tripndroid
[/list]
7.)Faux Sound Controls V3.6 Included
8.)Updated to latest CM Kernel Source.
9.)GPU sits at lower frequency during suspended screen, (Battery life increased ! )
10.)New algorithm for frequency scaling.
11.)Reduced lags when you keep using your phone for several days without a restart.
12.)Various tweaks for memory management
13.)Introduced Adreno-Idler to manage GPU as GPU does not sit on lowest frequency even while doing nothing.
14.)Small tweak for graphical performance
15.)Tweaked Stock-Interactive governer.
16.)New frequency to GPU for smooth scaling
17.)Small tweak for lowmemorykiller
18.)CPU tweaks for better performance(Cores go online in reverse sequence of being online & schedule work on any available cpu)
19.)USB fastcharge=> Charging is generally slow when connected to a USB port, Now you can have faster charging by enabling it through any fast charge app.
20.)Overclocked and Underclocked GPU-Overclock for better gaming and fluidity & Underclock for battery life.
21.)Inbuilt KCAL Colour Control.
22.)ZRAM support, more zram added than default.
23.)Set SELINUX to permissive permanently from the kernel.
24.)NTFS filesystem support
25.)Kernel uses frontswap and cleancache for better performance.
26.)4 Hotplugs : Mako hotplug,inteeliplug,zen-deceision,msm-sleeper
Changelog:
V4.2
Links updated, and kernel updated to latest source
V4.1
Complete Rebuilt from scratch because of a sudden MASSIVE change in CM sources
V4.0
1.)Re-enabled Adreno-Idler
2.)Set SELINUX to permissive permanently
3.)Disabled crc check for 30% better performance in IO Schedulers
4.)Added more ZRAM
5.)NTFS filesystem support
6.)Enabled KSM, Cleancache(better IO performance) & Frontswap(improves performance when zram becomes full)
7.)New Hotplugs added-MSM Sleeper, Intelli-plug,Zen-deceision,Mako Hotplug
8.)Enabled ARCH_Power to reduce Power-Consumption and increase Battery-Life.
9.)Fix most of the problems with Z00T/Selfie Variants
V3.1
Added KCAL Colour Control-Chk Post 3 on how to use it.
V3.0
1.)Added new frequency to GPU for smooth scaling
2.)Small tweak for lowmemorykiller
3.)CPU tweaks for better performance(Cores go online in reverse sequence of being online & schedule work on any available cpu)
4.)USB fastcharge=> Charging is generally slow when connected to a USB port, Now you can have faster charging by enabling it through any fast charge app.
5.)Overclocked and Underclocked GPU-Overclock for better gaming and fluidity & Underclock for battery life.
V2.0
1.)Updated to latest CM Kernel Source.
2.)GPU sits at lower frequency during suspended screen, (Battery life increased ! )
3.)New algorithm for frequency scaling.
4.)Reduced lags when you keep using your phone for several days without a restart.
5.)Various tweaks for memory management
6.)Introduced Adreno-Idler to manage GPU as GPU does not sit on lowest frequency even while doing nothing.
7.)Small tweak for graphical performance
8.)Tweaked Stock-Interactive governer.
All together ,this new build has increased the phone and gaming performance as reported by my testers.
Click to expand...
Click to collapse
V1.0
1.)Built with latest Uber-4.9-kernel Toolchain
2.)Advanced TCP Algorithms for TCP Congestion Control
3.)Westwood TCP-Algorithm as default.
4.)Works On any CM based ROM(CM13,RR etc)
5.)11 New Tweaked & Tuned Governers for various Workload(Heavy,Low,Gaming etc)
Code:
[b][u]List of New Governers[/u][/b][list=1]
[*]elementalx
[*]hyper
[*]impulse
[*]intelliactive
[*]interactiveX
[*]lionheart
[*]pegasusq
[*]slim
[*]smartassH3
[*]smartmax
[*]yankactive
[/list]
6.)4 New IO-Schedulers For Various Workloads
Code:
[b][u]List Of New IO-Schedulers[/u][/b][list=1]
[*]Sio
[*]Fiops
[*]Zen
[*]Tripndroid
[/list]
7.)Faux Sound Controls V3.6 Included
Source:
Updated[For V4.1 + ]
https://github.com/abhishekr700/Nemesis_Kernel
Old
Nemesis Fusion Kernel Source
Downloads:
Z00L
Nemesis Fusion V4.2
Old Releases
Nemesis Fusion V4.1
Nemesis Fusion V4.0
Nemesis Fusion V3.1
Nemesis Fusion V3.0
Nemesis Fusion V2.0
Nemesis Fusion V1.0
Z00T
Nemesis Fusion V4.2
Old Releases
Nemesis Fusion V4.1
Nemesis Fusion V4.0
Nemesis Fusion V3.1
Nemesis Kernel V3.0
Nemesis Fusion V2.0
Nemesis Fusion V1.0
How To Install:
METHOD 1 [FASTBOOT]
Download the kernel image file
Put this file in the same folder as fastboot.exe
Put phone in fastboot mode and connect to pc.
Run this command
(For flashing kernel temporarily.Reboot to return to your previous kernel)
Code:
fastboot boot boot.img
(For flashing kernel permanently)
Code:
fastboot flash boot boot.img
Wipe cache via recovery.
Done!!!
METHOD 2 [TWRP]
Download the kernel image file.
Put this in your SD Card
Reboot to TWRP Recovery
Choose the option to flash img
Choose the kernel file.
Wipe cache via recovery.
Done!!!
CREDITS
These 2 guyz made this kernel development awesome.They helped me lear things and clear my doubts.
@say99
@yarpiin
CM13 Devs
@LuK1337
@luca020400
@itsyourgarry Special thanks for testing the builds.
@Njishi Special thanks for testing the builds.
@savoca Original Dev of KCAL Colour Control.
Instead of using this as a base for your work, CONTRIBUTE DIRECTLY TO THIS PROJECT VIA GITHUB.Just Making another kernel with a small feature addition only results in " Hotchpotch " in forum.Please contribute to this , Yes you will get credits for it.
Click to expand...
Click to collapse
XDA : DevDB Information
Nemesis Fusion Kernel, Kernel for the Zenfone 2 Laser
Contributors
abhishekr700
Kernel Special Features:CM Based Kernel for Zenfone 2 Laser
Version Information
Status: Stable
Created 2016-05-16
Last Updated 2016-05-16
Work To Be Done
1.)Overclock CPU to 1.4 GHz (HElp Needed , Please help me on this)
2.)Overclock/Underclock GPUDone in V3.0
3.)Faster Charging While Charging Phone through a USB portDone in V3.0
4.)LED Blink Rate Control Already Present
5.)Support for Kernel Adiutor/Synapse DOne!
6.)KCALL Colour control V3.1
Suggestions are welcomed here.Please post with a github commit link.
BUGS / BUG-FIXES
1. Phone restarts on pressing CALL button = Not at all kernel related, its a old cm bug.
2.Pixelmaster Camera does not work on Zenfone Selfie [NEW] [Front Cam Flash fix by @jpnos ] =
Atlast , I managed to fix it. Special Thanks to @jpnos for finding the exact bug.
THIS IS NO MORE NEEDED STARTING FROM V4.0
Click to expand...
Click to collapse
Go to /system using any root browser.
Open the file named build.prop
Add the following lines to the end of file
Code:
#Zenfone Selfie Camera Fix for Nemesis Kernel
#[email protected]
#[email protected]
ro.product.device=ASUS_Z00[COLOR="Red"]U[/COLOR]
ro.product.model=ASUS_Z00[COLOR="red"]U[/COLOR]D
Reboot Once , Done !!!
Don't Forget To Press the Thanks Button
Same Kernel with CPU Overclocked to 1.4 GHz
The kernel postex here in this post is still in testing phase.I request people to flash it TEMPORARILY and provide feedbacks.
Instructions on flashing temporarily are given in 1st post.
Edit:
For some unknown reasons, the 14. Ghz frequency is not being showed.No need to try this.
Reserved
Using Various Features
1.)Governers & IO-Schedulers-Use an app,I recommend using No Frills CPU Control for this .Its simplicity is its power.
2.)Sound Controls 3.6 -Go to play store and get faux sound controls app to use this feature.
3.)KCAL Colour Control-Use the app from here
Memorable User Reviews
simanicu said:
This is a great kernel. Now I can truly say my zenphone feels like a flagship, just like my previous G4, or the likes of Samsung or Apple.
I didn't expect much since I only spend $150 on it, bought it just because my G4 went for a swim and drown literally, lost it in the ocean. Anyhow I'm off topic.
I applied this kernel yesterday and since than is super responsive. Not only that, but before applying this kernel my phone was feeling kinda hot to the touch, stock and even with CM. Even when it was in my pocket felt a little warm. A totally different story now, it runs cool most of the time and only warms up a little when on Facebook or on a more demanding game, whenever I pick it up even after 10 min, it feels cool to the touch. I run CM 13 with Nemesis kernel and is great.
Who says that you have to pay $600 to get a good phone experience?
I can't thank you enough!!!
Click to expand...
Click to collapse
simanicu said:
2.0 is great, performance feels the same as in 1.0, but I did notice some battery improvements. Been using my phone for over 12 hours now, for calls mostly, email and some FB, I'm only down to 35% . On 1.0 yesterday had to charge it after around 10 hours use.
Kudos to the developer, great job!!
Click to expand...
Click to collapse
corybucher said:
So after about a day or so with v2 on z00t I have noticed a increase in battery life and performance. Phone is much snappier and most lag is not present. I play hungry shark world from time to time and have noticed a better gaming experience. Looking forward to more development in the future.
Click to expand...
Click to collapse
gabriele1974 said:
i can confirm that PixelMaster Camera on Z00T (Selfie) stop working with V 3.0.. i flashed on the 2.0 build but i'm waiting a 4.0 or only a 3.0 bugfix.. camera on this model in very important for the flash led of the front 13mpx cam and on the market i can't find another one with that function but also fast charging introduced with 3.0 is awesome.. i've tested two days ago between my 551ML and Selfie both at 40% of battery life and i'm being shocked seeing that in 10 minutes the Selfie with fast was at 51% when 551ML quick-intel-charge was only at 46%... please fix the cam bug quickly as you can.. for my use there's no other to add to this kernel! (Antutu scores 49000pt lol in OC)
have a nice week-end!
Click to expand...
Click to collapse
Where is the link?
Well done !!! :highfive:
This kernel does not support my ROM. Please remove my ROM from your features list.
Thank You.
RukusX7 said:
This kernel does not support my ROM. Please remove my ROM from your features list.
Thank You.
Click to expand...
Click to collapse
May I ask why?
even when it is based on cm?
abhishekr700 said:
May I ask why?
even when it is based on cm?
Click to expand...
Click to collapse
If you built for Z00L, touch won't work on Z00T
and vice versa.
RukusX7 said:
If you built for Z00L, touch won't work on Z00T
and vice versa.
Click to expand...
Click to collapse
i am releasing z00T build soon!!!
Bro.. i flashed overclock img.. but i am not able to increase cpu frequency. As there is no option in Cpu frilz app to increase it
Njishi said:
Bro.. i flashed overclock img.. but i am not able to increase cpu frequency. As there is no option in Cpu frilz app to increase it
Click to expand...
Click to collapse
Check your PM
Sent from my C2305 using Tapatalk
This work on ZE500KL ??
Suggestions
1) Support for kCAL Colour Control (enhances Colour Vibrance and Intensity). (available as a Screen TAB in Kernel Adiutor).
2) Support for HotPlugs like
MSM (Fast Lane Load)
Mako
AluCard
IntelliPlug
ThunderPlug
AutoSMP
MSM mP-Decision (Bricked)
3)CPU ---
Support for MSM Sleeper (allows for longer and aggressive Deep-Sleep to increase Battery-Life).
Fixed High-Load Average from UnInterruptible Waits (reduces CPU-Load even more in idle state).
Support for Fast-IDLING of CPU (should reduce Power-Consumption a lot).
Support for Power Efficient WorkQueue to reduce Power-Consumption (available in CPU tab of Kernel Adiutor).
Memory ---
Support for Kernel SamePage Merging (KSM).
Support for Swap, FrontSwap, and zSwap techniques (improve performance significantly when zRAM is full).
Support for Memory Compaction (improves performance).
Support for CleanCache Driver (improves I/O performance).
Support for Cross-Memory .
Support for zRAM
compression algorithm (improves performance by saving memory).
Battery---
Support for ARCH_Power to reduce Power-Consumption and increase Battery-Life.
Support for the new PowerSuspend algorithm (improves Battery-Life).
Support for preventing unnecessary WakeLocks (improves Battery-Life). (available under the Misc. Tab of Kernel Adiutor)
Support for Larch Power feature (should improve Battery-Life ).
Optimizations and Tweaks ---
Disabled CRC-Check for upto 30% faster I/O .
Support for FRandom RNG Driver (upto 50x faster than the default one).
Compiled with UberTC 4.9.4 Optimized for 64-BIT (Uber uses the latest of every component as well as increases the Battery-Life too).
Fixed the default value of SELinux to Permissive (allows certain apps such as Viper4Android to function properly).
Support for Touch-Boost and CPU-Boost.
Support for Vibration Intensity Control (available in Misc. TAB of Kernel Adiutor).
Lowest Possible CPU-Usage
(a lot of tweaks have been implemented system-wide).
Support for various Wake-Up Gestures including D2W.
Disabled Debug-Info (should reduce the size of the kernel making it lighter).
Great Work bro . I expect these changelogs
Crasim said:
This work on ZE500KL ??
Click to expand...
Click to collapse
Nope
Psm777 said:
1) Support for kCAL Colour Control (enhances Colour Vibrance and Intensity). (available as a Screen TAB in Kernel Adiutor).
2) Support for HotPlugs like
MSM (Fast Lane Load)
Mako
AluCard
IntelliPlug
ThunderPlug
AutoSMP
MSM mP-Decision (Bricked)
3)CPU ---
Support for MSM Sleeper (allows for longer and aggressive Deep-Sleep to increase Battery-Life).
Fixed High-Load Average from UnInterruptible Waits (reduces CPU-Load even more in idle state).
Support for Fast-IDLING of CPU (should reduce Power-Consumption a lot).
Support for Power Efficient WorkQueue to reduce Power-Consumption (available in CPU tab of Kernel Adiutor).
Memory ---
Support for Kernel SamePage Merging (KSM).
Support for Swap, FrontSwap, and zSwap techniques (improve performance significantly when zRAM is full).
Support for Memory Compaction (improves performance).
Support for CleanCache Driver (improves I/O performance).
Support for Cross-Memory .
Support for zRAM
compression algorithm (improves performance by saving memory).
Battery---
Support for ARCH_Power to reduce Power-Consumption and increase Battery-Life.
Support for the new PowerSuspend algorithm (improves Battery-Life).
Support for preventing unnecessary WakeLocks (improves Battery-Life). (available under the Misc. Tab of Kernel Adiutor)
Support for Larch Power feature (should improve Battery-Life ).
Optimizations and Tweaks ---
Disabled CRC-Check for upto 30% faster I/O .
Support for FRandom RNG Driver (upto 50x faster than the default one).
Compiled with UberTC 4.9.4 Optimized for 64-BIT (Uber uses the latest of every component as well as increases the Battery-Life too).
Fixed the default value of SELinux to Permissive (allows certain apps such as Viper4Android to function properly).
Support for Touch-Boost and CPU-Boost.
Support for Vibration Intensity Control (available in Misc. TAB of Kernel Adiutor).
Lowest Possible CPU-Usage
(a lot of tweaks have been implemented system-wide).
Support for various Wake-Up Gestures including D2W.
Disabled Debug-Info (should reduce the size of the kernel making it lighter).
Great Work bro . I expect these changelogs
Click to expand...
Click to collapse
Can you link me to the thread you copy pasted these features from.
Thanks
Sent from my C2305 using Tapatalk
this kernel is still update?
[/COLOR]
abhishekr700 said:
I wonder where people like you come from,
Go to my kernel source and see commits in overclock branch.
And for God's sake follow this before pointting finger at anyone.
Sent from my C2305 using Tapatalk
Click to expand...
Click to collapse
thanks very much for ur answer and for the setup u made for other kernels to come in the future hope u would keep this updated
no possibility to open the band 4 ( aws ) lte from the kernel?
from where I change the frequency?
arielsoyyo said:
no possibility to open the band 4 ( aws ) lte from the kernel?
from where I change the frequency?
Click to expand...
Click to collapse
If you can elaborate what this is,and provide links to a kernel which has implemented these features,I would try to get those working on this kernel.
venomus001 said:
[/COLOR]
thanks very much for ur answer and for the setup u made for other kernels to come in the future hope u would keep this updated
Click to expand...
Click to collapse
My pleasure!!
Hope you like it.
motiwyl said:
this kernel is still update?
Click to expand...
Click to collapse
Yes more features will be added over time to this kernel,
I also invite people to contribute to this kernels development
Sent from my C2305 using Tapatalk
If you can run the band 4 ( aws ) for the device ... I think I make a monument !!!
arielsoyyo said:
If you can run the band 4 ( aws ) for the device ... I think I make a monument !!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
You may try this.
Sent from my C2305 using Tapatalk
Hello everyone i would like to share with you my draft project.Its a CM based kernel for nougat roms.
Why release?
Because i wanted to share my work with community.The more toys we got,the more fun we have
Based on ?
Kernel is based on CM 14.1 kernel with some additions.
Kernel editor?
I do NOT include any editor to zip file yet.its just an image file inside a flashable zip.
Bugs?
Yea...surely got.u better tell me
Works on ?
It is supposed to work on every S4 variant that was able to run CM13/14.1 nightly rom.Also it should work on any CM based ROM
This kernel or alucard on JDCTeam roms?
Surely alucard.This kernel is made for fun and for test.Noone could be compared to grandmaster alucard
Features:
Based on CM kernel
Updated since Dec 8 of CM upstream
Built with pure linaro 4.9
3.4.110 kernel base
Swipe to Sleep feature
(Swipe from right(back) softkey to left(menu) softkey-horizontically)
Intelli-plug Hotplug, MPDecision disabled
Updated Interactive CPU Governor from @Temasek's Hlte kernel
Updated CPU boost driver from @Temasek's Hlte kernel
ROW I/O Scheduler set by default
CPU Voltage Control
Dynamic Fsync toggle (disabled by default)
Power Efficient Workqueues for powersaving
Reduced bcmdhd wakelock
Enabled Fast Charge
Add Overclock/UnderClock options
Disabled CRC
Default governorarkness
Multi Core power saving option(Disabled by default)
Enabled Async
GPU OC(ALREADY ENABLED.KEEP IN MIND TO CHANGE IT IF YOU WANT)
Decreased touch boost by half
Modified Ramdisk
Push cpu on boot
I/O schedulers:
noop
row
cfq
bfq
Governors:
Wheatley
userspace
smartassH3
powersave
ondemand
interactive
dancedance
conservative
badass
asswax
adaptive
abyssplug
darkness
performance
Click to expand...
Click to collapse
Thats all
Download:https://www.androidfilehost.com/?w=files&flid=139640
Sources:
Kernel:https://github.com/dkati/SideCore-CM-SGS4
Ramdisk:https://github.com/JDCTeam/android_device_samsung_jf-common/commits/opt-cm-14.1-sidecore
Thanks to:
alucard_24
xsynergy510x
ktoonsez
Googymax
Feel free to report me any bug .Keep in mind that i am not a kernel developer....But..our s4 is sadly dying....i want to give whatever i can to :highfive:
XDA:DevDB Information
[Kernel][7.1.x][CM/LineageOS based]SideCore-SGS4, Kernel for the Samsung Galaxy S4
Contributors
side
Kernel Special Features:
Version Information
Status: Beta
Created 2016-12-28
Last Updated 2019-01-20
Changelog:
[23-08][11-07]
Added tripndroid IO sched
Added exFAT driver
[23-12][09-07]
Fully rebased source code
Faux sound edits
Stability on some commits
Custom kernel adiutor fork
Built with Linaro TC specially made for S4-jf
Support GCC6
Big upstream merge
Disable OC/UC
Default governor is interactive
io sched to 1024
Reduced swappiness to 40
enable early_suspend and dynamic fsync,by default
Fix fast charge
Reduce sleep time timeout
Optimize KSM to gain battery life
TC Flags ( O3 and more)
Safetynet stuff
Allow undervolt
Intelliplug as default hotplug
Old changelogs
20170209 build
Add/Fix ZEN io scheduler
GPU OC edits
Build ramdisk with LZMA compression
f2fs edits from upstream
set touch boost ms to 10
Reduce CPU0 freq after boot
20161228
Based on CM kernel
Updated since Dec 8 of CM upstream
Built with pure linaro 4.9
3.4.110 kernel base
Swipe to Sleep feature
(Swipe from right(back) softkey to left(menu) softkey-horizontically)
Intelli-plug Hotplug, MPDecision disabled
Updated Interactive CPU Governor from @Temasek's Hlte kernel
Updated CPU boost driver from @Temasek's Hlte kernel
ROW I/O Scheduler set by default
CPU Voltage Control
Dynamic Fsync toggle (disabled by default)
Power Efficient Workqueues for powersaving
Reduced bcmdhd wakelock
Enabled Fast Charge
Add Overclock/UnderClock options
Disabled CRC
Default governorarkness
Multi Core power saving option(Disabled by default)
Enabled Async
GPU OC(ALREADY ENABLED.KEEP IN MIND TO CHANGE IT IF YOU WANT)
Decreased touch boost by half
Modified Ramdisk
Push cpu on boot
I/O schedulers:
noop
row
cfq
bfq
Governors:
Wheatley
userspace
smartassH3
powersave
ondemand
interactive
dancedance
conservative
badass
asswax
adaptive
abyssplug
darkness
performance
Click to expand...
Click to collapse
forgot to mention...
I DO NOT CARE
FOR BURNT DEVICES
FOR BRICKED STUFF
FOR BOOTLOOPS
IF YOUR PARENTS DO NOT LOVE YOU
flash it with your own risk!
Thx i will try today
Nice kernel, but you could reduce the frequency of gpu for the fourth step? 600MHz is too much because there is a lot of glitches and artifacts (on my s4) , and I was forced to use 360mhz. I think that was the optimal frequency to 500MHz. But I see a big potential in this kernel. Thanks for your work. Regards
Thanks for the initiative, the only kernel I found for s4 was on android 5.1.1. I'm very confident that you will do a great job. Testing here to give feedback
Yes i have problem with the 600mhz with the GPU... If i reduce ti 360 NP at all
Anyway love this kernel
Best governator?
Inviato dal mio Pixel XL utilizzando Tapatalk
Appreciate your work Side I'm gonna try it out tomorrow.
wow nice work mate.
yea OC on GPU is a bit strange...i think i know whats going on
Because of this kernel will flash a 7.1.1 rom just to try it so excited.
Tomorrow when I have a while I'll try it out in aosp jdcteam 7.1.1 to see how it works and if it does not break the bluetoh, thanks
luiwii said:
Tomorrow when I have a while I'll try it out in aosp jdcteam 7.1.1 to see how it works and if it does not break the bluetoh, thanks
Click to expand...
Click to collapse
its a kernel for CM mate Not aosp
side said:
its a kernel for CM mate Not aosp
Click to expand...
Click to collapse
ok , thanks , don't works in aosp
OMG great work @side, I congratulate you for your kernel: D, I'm really excited to try it , thank you very much for giving us this gift for all of us who still have the already forgotten s4, waxing ... thank you very much
Sorry for the bad english, i use google traductor :'v
I have bootloop when I do wipe cache and dalvik, any reason ?, I am in the AICP ROM 12/30/16
killer!os133 said:
I have bootloop when I do wipe cache and dalvik, any reason ?, I am in the AICP ROM 12/30/16
Click to expand...
Click to collapse
Is aicp actually a cm based rom?
Next update will also have aosp version
side said:
Is aicp actually a cm based rom?
Next update will also have aosp version
Click to expand...
Click to collapse
Yup, is based in CM
Hey @side, great work on the kernel, so far everything is running smoothly, I just had to change GPU clock to 360, 600 gave me RRs and artifacts. You have a typo in the thread, the kernel is 3.4.112 not 3.4.110.
david19au said:
Hey @side, great work on the kernel, so far everything is running smoothly, I just had to change GPU clock to 360, 600 gave me RRs and artifacts. You have a typo in the thread, the kernel is 3.4.112 not 3.4.110.
Click to expand...
Click to collapse
whoops...thanks for that mate