[MOD] set min autoBrightness - Moto G Themes and Apps

Hi, this mod based on 4.4.2 US stock odex rom and I'm not shure if it'll be working on other roms
If you're using your phone at night then may be you observed that min value of standard brightness slider is less than min value of auto brightness
This mod allows set brightness to 0 when you're using auto brightness contoll and it's totally dark around.
You should flash following .zip via CWM
BrightnessPatch.zip - US

Does this allow the brightness to go as low as an app like RootDim can get? With that I can get down to very dim light which is great at night.

t-bon3 said:
Does this allow the brightness to go as low as an app like RootDim can get? With that I can get down to very dim light which is great at night.
Click to expand...
Click to collapse
Yes, I think it does.
In the night it'll be the lowest level that you can get. It will be even less than you can set using brightness slider tile.

S0bes said:
Yes, I think it does.
In the night it'll be the lowest level that you can get. It will be even less than you can set using brightness slider tile.
Click to expand...
Click to collapse
OK i'll give it a try. Do you have the original files as a flashable zip in case someone wants to revert the changes?

t-bon3 said:
OK i'll give it a try. Do you have the original files as a flashable zip in case someone wants to revert the changes?
Click to expand...
Click to collapse
Of course I'll give a cwm zip with original file if somebody asked me

Uhhh this dimmed the screen a bit TOO good cause now it's all black! Every 10m it turns on for about 200ms.
Please please please give the original CWM zip as soon as possible... The next thing I will try is to do a proper nandroid with this device :l
edit: Or could ANYBODY provide me with a working framework-res.apk ? 4.4.2 EU .... Maybe that's why this wasn't working
edit 2: OK, my phone is back. Don't flash this on 4.4.2 EU. Was my bad indeed.

I'd love this on UK 4.4.2
Verstuurd vanaf mijn XT1032 met Tapatalk

mdentener said:
I'd love this on UK 4.4.2
Verstuurd vanaf mijn XT1032 met Tapatalk
Click to expand...
Click to collapse
May be tomorrow

t-bon3 said:
OK i'll give it a try. Do you have the original files as a flashable zip in case someone wants to revert the changes?
Click to expand...
Click to collapse
Hi
I would suggest you to keep a copy of your framework-res.apk before flashing this...
Using the CWM zip, open with 7z and copy your original firmware-res.apk and rename the zip file as BrightnessPatch_Restore.zip and keep both in your device when you want to try this Brighness patch. If the patch doesn't work to your satisfaction you can revert to your original firmware by flashing your restore zip file..
Hi OP
Could you share what the changes you made in firmware-res.apk so that anyone wanting to decompile and recompile framework file can do themselves.
Thanks

mdentener said:
I'd love this on UK 4.4.2
Verstuurd vanaf mijn XT1032 met Tapatalk
Click to expand...
Click to collapse
and now you can download GB version
smohanv said:
Could you share what the changes you made in firmware-res.apk so that anyone wanting to decompile and recompile framework file can do themselves.
Thanks
Click to expand...
Click to collapse
Of course.
You need to add 2 red lines in framewor-res/values/arrays.xml
Code:
<integer-array name="config_autoBrightnessLevels">
[COLOR="Red"] <item>10</item> [/COLOR]
<item>50</item>
<item>100</item>
<item>150</item>
<item>200</item>
<item>800</item>
<item>1300</item>
<item>2000</item>
<item>3000</item>
<item>4000</item>
<item>8000</item>
</integer-array>
<integer-array name="config_autoBrightnessLcdBacklightValues">
[COLOR="Red"]<item>0</item> [/COLOR]
<item>24</item>
<item>36</item>
<item>47</item>
<item>71</item>
<item>118</item>
<item>141</item>
<item>165</item>
<item>188</item>
<item>212</item>
<item>230</item>
<item>255</item>
</integer-array>

May I ask for 4.4.2 EU too?
Gesendet von meinem XT1032 mit Tapatalk

Kodaro said:
May I ask for 4.4.2 EU too?
Gesendet von meinem XT1032 mit Tapatalk
Click to expand...
Click to collapse
only if you'll provide framework-res.apk

S0bes said:
and now you can download GB version
Of course.
You need to add 2 red lines in framewor-res/values/arrays.xml
Code:
<integer-array name="config_autoBrightnessLevels">
[COLOR="Red"] <item>10</item> [/COLOR]
<item>50</item>
<item>100</item>
<item>150</item>
<item>200</item>
<item>800</item>
<item>1300</item>
<item>2000</item>
<item>3000</item>
<item>4000</item>
<item>8000</item>
</integer-array>
<integer-array name="config_autoBrightnessLcdBacklightValues">
[COLOR="Red"]<item>0</item> [/COLOR]
<item>24</item>
<item>36</item>
<item>47</item>
<item>71</item>
<item>118</item>
<item>141</item>
<item>165</item>
<item>188</item>
<item>212</item>
<item>230</item>
<item>255</item>
</integer-array>
Click to expand...
Click to collapse
I flashed your zip it bricked my phone. I bring my phone to life with my framework-res.apk backup.
This xposed exploit does the above the job.

smohanv said:
I flashed your zip it bricked my phone. I bring my phone to life with my framework-res.apk backup.
This xposed exploit does the above the job.
Click to expand...
Click to collapse
Which of two versions did you flash?
And what is your system version?

S0bes said:
Which of two versions did you flash?
And what is your system version?
Click to expand...
Click to collapse
When I downloaded this morning you had only one patch posted. Now I am seeing GB and US. I can try GB somtime today.

smohanv said:
When I downloaded this morning you had only one patch posted. Now I am seeing GB and US. I can try GB somtime today.
Click to expand...
Click to collapse
I'm running this US patch on my device and there is nothing problem with it
..retail.en.US
And I also got a positive feedback about GB version

S0bes said:
only if you'll provide framework-res.apk
Click to expand...
Click to collapse
That's no problem :good:
@smohanv The XPosed Module works very good

I'll try it tomorrow and report. Thanks for your efforts!
Sent from my Moto G with tapatalk

Kodaro said:
That's no problem :good:
@smohanv The XPosed Module works very good
Click to expand...
Click to collapse
Hi
It works with all variant...

If I want to back to stock, what should i do? I'm on us 4.4.2

Related

Amesrtis Accuwaterwidget full transparens

Beautiful Amestris ROM M_J_Nazari Thank you very much!I wanted so I made AccuweaterWidget full transparent.
Thank you for KIMBASINGER-> modded Widgets for help!
Sorry for my bad english;
Screenshots please.
jit1108 said:
Screenshots please.
Click to expand...
Click to collapse
These screens.
I tried jkay 14.92.5. It works very well!:good:
thanks for your work, this mod is added to main thread.
http://forum.xda-developers.com/showpost.php?p=38380660&postcount=4
Excellent work, we all forum members proud of you. We expect more from u soon.
Thanks. Wishing u all the best for ur next project.
How install it?
Edit; Replace the file.
starandroid said:
How install it?
Edit; Replace the file.
Click to expand...
Click to collapse
I´m not rooted. No change for me to install this without Root right?
R: Amesrtis Accuwaterwidget full transparens
Booker21 said:
I´m not rooted. No change for me to install this without Root right?
Click to expand...
Click to collapse
You cannot replace the file if no rooted the device.
Inviato dal mio GT-I9300 con Tapatalk 2

[MOD] CRT Screen Off Animation [Sense]

CRT Screen Off Animation
Only tested on Android 4.2.2, may possibly work on 4.1.2 but backup first. TrickDroid users reporting issues. Stand by
Click Here to Download
Click Here to Download APM-Ready Version (Flash APM then this)
Thanks to this guide: http://forum.xda-developers.com/showthread.php?t=2368207 by Hero​
About a minute ago i was reading the guide, now i have the mod. Thanks mate
EDIT: i lost my statusbar :v
Thansk, ARHD 12.1 works great
HTC One
superstick1 said:
About a minute ago i was reading the guide, now i have the mod. Thanks mate
EDIT: i lost my statusbar :v
Click to expand...
Click to collapse
Go look for it That's weird, works fine for me and it's just the stock files, maybe you had a status bar mod?
Working perfect on Stock+GE UI...
I attempted this mod myself as my first android project but couldn't recompile classes.dex Thanks for sharing mate!:good:
Edit: time to update your signature..
Hello,
i'll try on Trickdroid 8.0 with OPB theme and i can't boot after flash :/
Reiki13 said:
Hello,
i'll try on Trickdroid 8.0 whith OPB theme and i can't boot after flash :/
Click to expand...
Click to collapse
The same for me , Trick 8.0 it doesn't start up..is there a chance to have the stock one in order to re-start up it?
Because the recovery IMG doesnt work
Thank you!
Works great in ARHD 12. 1
Sent from my HTC One
Reiki13 said:
Hello,
i'll try on Trickdroid 8.0 with OPB theme and i can't boot after flash :/
Click to expand...
Click to collapse
Daniele728 said:
The same for me , Trick 8.0 it doesn't start up..is there a chance to have the stock one in order to re-start up it?
Because the recovery IMG doesnt work
Thank you!
Click to expand...
Click to collapse
Oops I'm really sorry, will upload the stock files for you! Wonder why TrickDroid always has to be awkward ;D
Here ya go: https://www.dropbox.com/s/g2hzvk37kauz57r/TrickDroidStock-signed.zip
Matt said:
Go look for it That's weird, works fine for me and it's just the stock files, maybe you had a status bar mod?
Click to expand...
Click to collapse
Yes I have a modded status bar. Oops maybe that's the reason why XD
Sent from my HTC One using xda app-developers app
Matt said:
Oops I'm really sorry, will upload the stock files for you! Wonder why TrickDroid always has to be awkward ;D
Here ya go: https://www.dropbox.com/s/g2hzvk37kauz57r/TrickDroidStock-signed.zip
Click to expand...
Click to collapse
Thank you to be thinking but I always make a backup before i flashed a zip ... me what I want is that the animation works on Trickdroid
flashed on arhd 12.1 AND is OK
ome BIG problem : when push power button to off phone it restart and no power-off
how t solve ?
tks mate
jonata said:
flashed on arhd 12.1 AND is OK
ome BIG problem : when push power button to off phone it restart and no power-off
how t solve ?
tks mate
Click to expand...
Click to collapse
Try without the APM mod to see if that's the issue
Working perfectly on deodexed stock 4.2.2 thankyou
Boomed from my boombastic.
Matt said:
Try without the APM mod to see if that's the issue
Click to expand...
Click to collapse
solved :
re-flashed over APM mod and it's OK
,-)
tks mate
stock odexed please
would it be possible to also have to stock odex!
Because I tried but due to the odex file, it does not work!
naudmick said:
would it be possible to also have to stock odex!
Because I tried but due to the odex file, it does not work!
Click to expand...
Click to collapse
Well I don't think so, as the whole point of being odexed is to be not easily modifiable
Hi guys,
if someone has the apk for directly install it on THE ONE, it would be nice.
Thanks
DarkAlpha said:
Hi guys,
if someone has the apk for directly install it on THE ONE, it would be nice.
Thanks
Click to expand...
Click to collapse
Just flash this zip in recovery.. :good:
Sent from my HTC One using xda premium
Edit: unless you mean you have stock recovery, then I don't think this mod would be available in apk form
redbull123 said:
Just flash this zip in recovery.. :good:
Sent from my HTC One using xda premium
Edit: unless you mean you have stock recovery, then I don't think this mod would be available in apk form
Click to expand...
Click to collapse
Hi, thks for answering.
I m not sure i want to install a new recovery....i m on stock recovery.
I just want to be sure that i will till have stock update (next 4.3) if i install new recovery.

[MOD] Decreased Dialpad Vibro

Hi, I just wanna share with our community a little mod. May be someone have already noticed about too heavy vibration when you click on dialler buttons.
After applying this mod through CWM your dialpad vibration will be equal to navbar buttons vibration. So, vibration feedback will half decreased.
As for now I'll add only version for .retail.en.US rom (which is 4.4.3). If you have different ROM (region/android version) you can give a try with 443_1032_US_vibr.zip on your own risk (make backup of dialer.apk & .odex firsrt).
Or you can request this mod for your ROM by posting in this thread your files (dialer.apk & dialer.odex) and providing some info about ROM you're using (in case if somebody who have the same ROM want to test it).
Hi, i tried to copy this two files, but i cant see them with windows. I copied them in sdcard, but i dont know how can i get out from the phone because i didnt see them, pls help me, thanks
my phone has stock rom 210.12.40.falcon_umtsds.asiaretail.en.03 android 4.4.4. i changed the extension of dialer.odex because not works to upload.Thank you
woozie.2007 said:
my phone has stock rom 210.12.40.falcon_umtsds.asiaretail.en.03 android 4.4.4. i changed the extension of dialer.odex because not works to upload.Thank you
Click to expand...
Click to collapse
sorry for delay
Here you go
Thank you, i flashed right now and everything is very well, if i want to back stock, all i have to do is reflash with asia_revert ok?
woozie.2007 said:
Thank you, i flashed right now and everything is very well, if i want to back stock, all i have to do is reflash with asia_revert ok?
Click to expand...
Click to collapse
That is correct...
S0bes said:
Hi, I just wanna share with our community a little mod. May be someone have already noticed about too heavy vibration when you click on dialler buttons.
After applying this mod through CWM your dialpad vibration will be equal to navbar buttons vibration. So, vibration feedback will half decreased.
As for now I'll add only version for .retail.en.US rom (which is 4.4.3). If you have different ROM (region/android version) you can give a try with 443_1032_US_vibr.zip on your own risk (make backup of dialer.apk & .odex firsrt).
Or you can request this mod for your ROM by posting in this thread your files (dialer.apk & dialer.odex) and providing some info about ROM you're using (in case if somebody who have the same ROM want to test it).
Click to expand...
Click to collapse
Thank you very much for this useful MOD
Could you make a "revert" zip also for US 4.4.3 firmware?
remo0073 said:
Thank you very much for this useful MOD
Could you make a "revert" zip also for US 4.4.3 firmware?
Click to expand...
Click to collapse
Sure ^)
S0bes said:
Sure ^)
Click to expand...
Click to collapse
Thank you very much
You are the king, man!
hi S0bes, im using your mod very nice, but when i switched on art runtime, the dial crash. You know why? can i repair this, or only you can? thanks
woozie.2007 said:
hi S0bes, im using your mod very nice, but when i switched on art runtime, the dial crash. You know why? can i repair this, or only you can? thanks
Click to expand...
Click to collapse
You should use dalvik or do not use this mod
S0bes said:
You should use dalvik or do not use this mod
Click to expand...
Click to collapse
yes, i know, i use dalvik usually, but i wanted to try art and i saw the mod not work, i wonder if you can modify the dial.apk after it switch on art? thanks
woozie.2007 said:
yes, i know, i use dalvik usually, but i wanted to try art and i saw the mod not work, i wonder if you can modify the dial.apk after it switch on art? thanks
Click to expand...
Click to collapse
I do not why but if I modify .smali files inside dialer.apk it will crash when you use art
with original dial.apk not crash, only modified...ok, thanks man
hi, S0bes, any news about running this mod on art? thanks
Where do you find the 443.444... numbers for your phone?
Sent from my Moto G using XDA Free mobile app
dirty_smurf45 said:
Where do you find the 443.444... numbers for your phone?
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
What are you talking about?
S0bes said:
What are you talking about?
Click to expand...
Click to collapse
The info I'm supposed to give you about my ROM. I don't know where to find it. Also, my Dialer apk in /system/priv-app doesn't have a .odex file anywhere near it. Anything i'm doing wrong in locating the files??
Sent from my Moto G using XDA Free mobile app
dirty_smurf45 said:
The info I'm supposed to give you about my ROM. I don't know where to find it. Also, my Dialer apk in /system/priv-app doesn't have a .odex file anywhere near it. Anything i'm doing wrong in locating the files??
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
It is enough just to have a classes.dex inside dialler.apk without having odex file near to apk
S0bes said:
It is enough just to have a classes.dex inside dialler.apk without having odex file near to apk
Click to expand...
Click to collapse
I got the Dialer apk. I'm using Paranoid ROM 4.6 BETA 5 with android 4.4.4. My Moto G 1st generation is from Boost Mobile. I don't know if this info will help somehow but here it is:

6.0 MM UI Mod for Note edge

Hello Guys,
I wanted to share my 6.0 Mod with you
* You can try it on any rom but make sure you take a backup first and if it worked let me know
* I have tested it on
- N910F Stock 5.1.1
- River Rom by @Evren35
- Confirmed working on N915G Stock 5.1.1 by @rka here
- Confirmed working on N915FY Stock 5.1.1 by @pashamangl here
Mod features :
- Notification panel and toggles themed like 6.0 MM
- Remove the gaps on the 2 sides of the notification panel
- Rounded-corners notifications
- Rounded-corners recent apps
Link :
http://www10.zippyshare.com/v/Yl0d794z/file.html
Flash it via recovery
If you like it don't forget to hit thanks
It worked on my river rom using sprint variant thanks man
Sent from my SM-N915P using XDA Free mobile app
OZKR88 said:
It worked on my river rom using sprint variant thanks man
Sent from my SM-N915P using XDA Free mobile app
Click to expand...
Click to collapse
You're welcome
Excellent! Works perfectly so far on my N915G running stock 5.1.1. Thanks a lot.
@rka said:
Excellent! Works perfectly so far on my N915G running stock 5.1.1. Thanks a lot.
Click to expand...
Click to collapse
Thanks for the feed mate
I'll add this to the thread
Thank you so much worked on riverrom 5.1.1 & stock 5.1.1 for n915f
jo.3atef said:
Thank you so much worked on riverrom 5.1.1 & stock 5.1.1 for n915f
Click to expand...
Click to collapse
hhhhhhhhhhhhhhhhhhhhhhhhh tslm :*
work perfect on N915FY 5.1.1 stock rom.thank you
Super !! Thanks for this @7odaahmad
Looks nice.. But is it possible to change colors after installing?
Gesendet von meinem SM-N915F mit Tapatalk
pashamangl said:
work perfect on N915FY 5.1.1 stock rom.thank you
Click to expand...
Click to collapse
Thanks for the feed, I'll add this
Evren35 said:
Super !! Thanks for this @7odaahmad
Click to expand...
Click to collapse
You're welcome
and thanks for the awesome rom :good:
mad-jo said:
Looks nice.. But is it possible to change colors after installing?
Gesendet von meinem SM-N915F mit Tapatalk
Click to expand...
Click to collapse
You can take a backup form the systemui.apk if you want to get the default colors
thanks man
أرسلت من adel-gh بإستخدام تاباتلك
I'd like to have this but with the default colors... does xposed still work after I flash this? I've got 6 toggles and no sfinder bar... can you please make a version with the default colors? ?????
rlrmineiro said:
I'd like to have this but with the default colors... does xposed still work after I flash this? I've got 6 toggles and no sfinder bar... can you please make a version with the default colors?
Click to expand...
Click to collapse
what do you mean by "this with the default colors" ?
cause the rom itself has the default colors and I changed them along with some other changes in this mod
I don't use exposed but if it's working for you right now it'll work cause all changes just in systemui.apk
rlrmineiro said:
I'd like to have this but with the default colors... does xposed still work after I flash this? I've got 6 toggles and no sfinder bar... can you please make a version with the default colors?
Click to expand...
Click to collapse
Xposed works fine after this. Are you running Wanam xposed by chance? I know there is a setting in there to hide the S finder bar.
Yep. Running wanam. What I meant was that I'd like to have te mod with the rounded corners etc etc, but keeping the stock 5.1.1 toggle and panel colors... but I'll give it a try... need I flash it or can I just replace systemui.apk and change permissions?
rlrmineiro said:
Yep. Running wanam. What I meant was that I'd like to have te mod with the rounded corners etc etc, but keeping the stock 5.1.1 toggle and panel colors... but I'll give it a try... need I flash it or can I just replace systemui.apk and change permissions?
Click to expand...
Click to collapse
yes no need to flash
Ok I'll make another file with the original colors
7odaahmad said:
yes no need to flash
Ok I'll make another file with the original colors
Click to expand...
Click to collapse
Thks!
You're awesome! ??????

Speed mod v1

Increase performance
Now dex2oat consume less battery life
LMK tweak
Increase surface flinger
Zygote optimization
reduce ram usage in background.
These are some build prop tweaks that really work
Just copy and paste this lines in your build prop file and reboot.
ro.PERCEPTIBLE_APP_ADJ=1
ro.CACHED_APP_ADJ=6
ro.SERVICE_APP_ADJ=3
ro.SECONDARY_SERVER_ADJ=10
ro.HIDDEN_APP_ADJ=15
ro.EMPTY_APP_ADJ =15
ro.HEAVY_WEIGHT_APP_ADJ=10
ro.BACKUP_APP_ADJ=10
dalvik.vm.usejitprofiles=speed
dalvik.vm.dex2oat_swap=true
persist.zygote.preload_threads=4
ro.hwui.use_gpu_pixel_buffers=true
ro.hwui.disable_vsync=true
ro.hwui.shape_cache_size=4
ro.max.fling_velocity=15000
dalvik.vm.verify_bytecode=false
ro.HOME_APP_ADJ=3
ro.hwui.render_dirty_regions=false
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.zygote.disable_gl_preload=true
Work on stock?
diegomartinezlovey said:
Work on stock?
Click to expand...
Click to collapse
yes
Does it will work on invicta os with vegito kernel?????
jaxx08 said:
Does it will work on invicta os with vegito kernel?????
Click to expand...
Click to collapse
Since it's only additional lines in the build.prop of the rom: yes
is safe?
makinox said:
is safe?
Click to expand...
Click to collapse
Yes
There are no such lines in invicta os ?
jaxx08 said:
There are no such lines in invicta os ?
Click to expand...
Click to collapse
You need to add those lines to your build.prop... Please reread the instructions....
works with marshmallow? RR
strongst said:
You need to add those lines to your build.prop... Please reread the instructions....
Click to expand...
Click to collapse
Ok ty & should i paste all the lines directly in last section????
jaxx08 said:
Ok ty & should i paste all the lines directly in last section????
Click to expand...
Click to collapse
Yes
InvictaOS / athene XT1642
Bug: Camera does not work / Crash at start.
Sent from my Moto G4 Plus using XDA Labs
strongst said:
Yes
Click to expand...
Click to collapse
Does it works on other phones??
mg712702 said:
Does it works on other phones??
Click to expand...
Click to collapse
I can't see device specific lines. But you can try it out, there's no risk if you make a backup as always.
mg712702 said:
Does it works on other phones??
Click to expand...
Click to collapse
Yes
I need ur Help!!!!!
in what file exactly should I copy these lines ??? I have my Moto G4 Plus and I would like to know the route to find the file and the way to open it so I can add the lines, I thank you and I appreciate that you respond to me as soon as possible.
MirkoTL said:
in what file exactly should I copy these lines ??? I have my Moto G4 Plus and I would like to know the route to find the file and the way to open it so I can add the lines, I thank you and I appreciate that you respond to me as soon as possible.
Click to expand...
Click to collapse
The file build.prop is located in /system
To open it use any text editor where you can save.
But make a backup of the original file and of your system partition!!!
strongst said:
The file build.prop is located in /system
To open it use any text editor where you can save.
But make a backup of the original file and of your system partition!!!
Click to expand...
Click to collapse
Thanks bro!!!
It will work on Oreo?

Categories

Resources