Hey guys, I recently found an SPH-P100 in a dumpster (score! :victory and I was quite disappointed to see that there's a terrible lack of development for these devices. As such, I've forked the newest device configuration available on github, and I'll be working to release a wider variety of ROMs and to complete hardware support as much as possible. Unfortunately, there is very little I can do to address the complete lack of 3G support, as I have no service whatsoever on my device.
Now, the ROM! This is a clean build of PAC-man 4.3 for p1c. I have removed the hardcoded verizon-specific properties and model identifiers as a first step towards proper support of both Verizon and Sprint models, but no functionality is changed from the newest CM10.1 builds.
I notice that there are not any PAC builds for p1(l|n) posted either, so if there is adequate interest I may begin builds for those devices as well.
TWRP 2.6.3.0 is the included recovery, and has full SELinux support. (Compatible with KitKat ROMs!)
Downloads
PAC 4.3.1 -- Build Date 1-17-2014:
p1c: Androidfilehost | Direct MD5: 5b817c6c94753f136e3fa7b98d6326c0
Changes:
First build of PAC for this device
You are definately right. As of right now, there are no developers working on the p1c. The last one i remember was stimp0z, and his son broke his tab. So, all the developers are now gsm based. Terenceng does have a kit kat version for the p1c. I have it on my other tab. Anyway, the developers all went to kit kat.
If i can be of help, let me know.
Sent from my SCH-I800 using xda app-developers app
Deep Nox said:
You are definately right. As of right now, there are no developers working on the p1c. The last one i remember was stimp0z, and his son broke his tab. So, all the developers are now gsm based. Terenceng does have a kit kat version for the p1c. I have it on my other tab. Anyway, the developers all went to kit kat.
If i can be of help, let me know.
Sent from my SCH-I800 using xda app-developers app
Click to expand...
Click to collapse
as of now, there's one developer working on p1c, then :3
if you have 3g service on your tabs, i could use your help... as i understand it 3g hasn't worked on any p1c model since the linux 3.0.x port?
I have 3g on one tab, but it's on galaxy cubed. My other tab is on terenceng cm11 mod. Kit kat. If you could make a zip file with a patch to flash on kit kat, i could try it out.
Sent from my SCH-I800 using xda app-developers app
ultravioletnanokitty said:
Hey guys, I recently found an SPH-P100 in a dumpster (score! :victory and I was quite disappointed to see that there's a terrible lack of development for these devices. As such, I've forked the newest device configuration available on github, and I'll be working to release a wider variety of ROMs and to complete hardware support as much as possible. Unfortunately, there is very little I can do to address the complete lack of 3G support, as I have no service whatsoever on my device.
Now, the ROM! This is a clean build of PAC-man 4.3 for p1c. I have removed the hardcoded verizon-specific properties and model identifiers as a first step towards proper support of both Verizon and Sprint models, but no functionality is changed from the newest CM10.1 builds.
I notice that there are not any PAC builds for p1(l|n) posted either, so if there is adequate interest I may begin builds for those devices as well.
TWRP 2.6.3.0 is the included recovery, and has full SELinux support. (Compatible with KitKat ROMs!)
Downloads
PAC 4.3.1 -- Build Date 1-17-2014:
p1c: Androidfilehost | Direct MD5: 5b817c6c94753f136e3fa7b98d6326c0
Changes:
First build of PAC for this device
Click to expand...
Click to collapse
Deep Nox said:
You are definately right. As of right now, there are no developers working on the p1c. The last one i remember was stimp0z, and his son broke his tab. So, all the developers are now gsm based. Terenceng does have a kit kat version for the p1c. I have it on my other tab. Anyway, the developers all went to kit kat.
If i can be of help, let me know.
Sent from my SCH-I800 using xda app-developers app
Click to expand...
Click to collapse
ultravioletnanokitty said:
as of now, there's one developer working on p1c, then :3
if you have 3g service on your tabs, i could use your help... as i understand it 3g hasn't worked on any p1c model since the linux 3.0.x port?
Click to expand...
Click to collapse
first up - great to see someone working on development for the p1c - good score finding one in the bin!
to make things clearer - i was never a developer for the p1c, my old tablet (the p1 GSM version) was broken by my youngest son recently. my work on the p1c was purely guess work / diagnosed via my testers. p1c lost it's support from it's main developer (jt1134) before kernel 3.0 was released so without a developer to work on p1c related issues, it was hit and miss all the way. both humberos and myself had it booting, but it never worked with data (though attempts were made). now due to a generous donation from one of my CDMA testers, i will soon receive a Sprint tablet he has spare so i can continue developing - which means it will be a lot easier for me to work on issues facing the CDMA variants (but will never be able to test data myself as I live in Australia, not USA).
however - the more developers that work on the p1c the better, so please keep working on whatever you can - also working on something different to CM is definitely called for as i believe the users deserve a choice between custom ROMS for their SGT7.
if you wish to have a crack at data already - shoot me a pm and i'll give you some commits to look into that may help you on your way.
I am another P1C user, the last build around here that worked for me was alrodger's 4.1.2
Terenceng's does not work on my P1C, I am on verizon and it doesn't find the carrier and never activates.
P1C is only $75 on ebay these days for refurbished, great value.
I was kinda hoping to find a kitkat build for p1c that works but none exists and doesn't seem forthcoming by anyone.
I guess I will try 4.3.1
Does this have working usb and wifi tether? That's a biggie for me.
---------- Post added at 06:43 PM ---------- Previous post was at 06:19 PM ----------
Okay I get the same failure trying to install this that I got with alrodger's final build.
using TWRP from the last kitkat flash, I wipe everything except the external sd card
then I try to install the rom and I get
assert failed: getprop("ro.product.device") ==
and a long list of devices
does that mean I have a device not in that list?
it then says
"E:Error executing updater binary in zip"
Also on 4.1.2 on my Sprint tab 7. I'm downloading and will give it a run. I dont have 3G but I'll report back after install.
terenceng is working on 4.4 and has "Coming Soon" for the PC1 but been a while. so now one is working on 4.4.
thanks ultravioletnanokitty for giving the P100 some love.
Update : ROM installed with out issue also used PAC gapps. WiFi OK camera OK feels quicker than 4.1.2. So all good for last 30 minute of use. Thanks for this rom dude nice job.
Cheers
update: okay I remembered how to get back to basics and I used heimdall to sideload cwm bootloader recovery
very fun looking rom, however it suffers from the same problem as Terenceng's:
it does not find the verizon radio/carrier and crashes when I try to manually activate it
_ck_ said:
update: okay I remembered how to get back to basics and I used heimdall to sideload cwm bootloader recovery
very fun looking rom, however it suffers from the same problem as Terenceng's:
it does not find the verizon radio/carrier and crashes when I try to manually activate it
Click to expand...
Click to collapse
Could u link to the cwm I can't seem to find it... thanks!
TaPpEd from my nOtEwOrThY N2
Hi again, as stated before I do not have 3G connection plan on my Sprint tab, So I cannot test connectivity to 3G. All other functionality I can test.
Rom working nicely, few issues with following apps:
Netflix: movie never starts playing
Youtube: video never starts playing, "There was a problem while playing, Touch to retry"
Pandora: Audio does not start
Google Play Music: Audio does not start
Timely alarm clock: The set time to ring caused app stop
Navigation in all these apps is OK just issue when playing something
Apps working well:
iHeartRadio: Working OK
Gmail: Ok
Camer: pictures OK
Ebay: seems to be working ok but have not tested placing a bid
Let me know what else I can check, weekdays have little time to test but should be able to get something done.
Let me know what you want me to check or report on?
Cheers
jrbxx7 said:
Could u link to the cwm I can't seem to find it... thanks!
TaPpEd from my nOtEwOrThY N2
Click to expand...
Click to collapse
http://cmw.cmfs.me/p1/p1c/recovery/cwm-5.0.2.7-p1c.tar
http://wiki.cyanogenmod.org/w/Install_CM_for_p1c
_ck_ said:
http://cmw.cmfs.me/p1/p1c/recovery/cwm-5.0.2.7-p1c.tar
http://wiki.cyanogenmod.org/w/Install_CM_for_p1c
Click to expand...
Click to collapse
Thanks
TaPpEd from my nOtEwOrThY N2
BelannaBi said:
Hey great job on the ROM, however I have found some bugs. Upon installing the keyboard didn't work. I installed hackers keyboard. Web videos and audio also do not seem to work either. I was also wondering if charging with USB while the device is on could be enabled.
Sent from my SCH-I800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
media playback is flat-out broken in all p1x 4.3+ roms, i believe... also, i've never found charging while the device is on to work at all... if i leave it plugged into my laptop with the screen off overnight, it gets up to 99%. if i want to fully charge it the only option i've found is to power it off and plug it in. i don't have the original samsung charger or cable, though, so that could be it. regarding the keyboard, are you using gapps? i am on my tab, and i don't have any issues... it could be an issue with the aosp keyboard, though.
I just also recently picked up one of these guys, my actual intentions for mine is to get it on verizon prepaid using a extravert as a donor phone and tethering the 3g. I seen a guy offering a service to flash them but I am a bit unsure I would rather do it myself. Have you ever looked into this yet. You might get more bars with verizon than you do with sprint. Plus at like 10 bux a month unlimited internet isn't tp bad ( if you buy a $30 card good for 3 monthes IE $10 a month)
Let me know if I can be of assitance, Looking to flash a light weight rom.
blazin6969 said:
I just also recently picked up one of these guys, my actual intentions for mine is to get it on verizon prepaid using a extravert as a donor phone and tethering the 3g.
Click to expand...
Click to collapse
It is my understanding (but not firsthand experience) that verizon can detect this within a couple of months and kill the imei, so be careful.
Instead I got onto a friend's family plan for $10 a month legit (but data cap of course)
Do I install this in recovery?
Sent from my SCH-I800 using Tapatalk
MVD
_ck_ said:
It is my understanding (but not firsthand experience) that verizon can detect this within a couple of months and kill the imei, so be careful.
Instead I got onto a friend's family plan for $10 a month legit (but data cap of course)
Click to expand...
Click to collapse
Lets say I work for Verizon in a department that has privy info and tools at my disposal and I will tell you we have a tool called MVD it is a Mobile Virtual Diagnostic it can detect root and will show if the tool is run. The thing is it is only loaded for tools that have the most current version of My Verizon application installed 10.0 or higher. Anything prior to that it won't load your info so root can't be seen with general tech tools. Just FYI... I am happy you all are working on SCH-I800 But I can't seem to find the the Root and Tar files to load... Any image files link?
vzw said:
Lets say I work for Verizon in a department that has privy info and tools at my disposal and I will tell you we have a tool called MVD it is a Mobile Virtual Diagnostic it can detect root and will show if the tool is run. The thing is it is only loaded for tools that have the most current version of My Verizon application installed 10.0 or higher. Anything prior to that it won't load your info so root can't be seen with general tech tools. Just FYI... I am happy you all are working on SCH-I800 But I can't seem to find the the Root and Tar files to load... Any image files link?
Click to expand...
Click to collapse
WOW nice info. Thanks. Another reason to remove every bit of verizon bloat.
TaPpEd from my XpOsEd 4.4.2 NIII
Anything new with this ROM?
ultravioletnanokitty said:
media playback is flat-out broken in all p1x 4.3+ roms,
Click to expand...
Click to collapse
Well, that explains the lack of sound and the fact that all video apps crash.
Seriously though, this ROM is a significant improvement for me compared to Cyanogenmod 9.1 (4.0.4). My Tab is far more stable than it was, and has only crashed on me once, forcing me to do a factory reset.
Can I flash back to an earlier ROM, say 4.2.2 or 4.0.4, without bricking my Tab? I have seen on the AT&T Galaxy S 3 (SGH-i747) board that S 3s that updated OTA to 4.3 will hard brick if flashed to an older ROM, so I am concerned.
Also, how close in hardware is the p1c to the Galaxy S GT-i9000? I have several i9000 ROMs on my computer, and if it is close enough, I might be able to get media working on mine. Worth a try. :fingers-crossed:
Related
Here is a link to the nightly CM6 builds being compiled by the guys at #teamdouche.
Obviously if you are using a G2 you would choose the Vision folder.
NIGHTLY BUILDS Here
HPDI GAPPS Here
Credit to TeamDouche for their amazing dedication and hard work!
If you want this link to stay up, do NOT bug #TeamDouche do not ask them any questions, do not report any bugs, let them do their job!!!!!
THESE DO NOT INCLUDE GOOGLE APPS AND ARE STILL BUGGY. DO A NANDROID BACKUP, WIPE AND THEN FLASH
________________________________
People this is just the link to where you can find the nightlys... they are not for the new flasher/modder! Don't expect them to be stable at all.
RC1 is on the way... once that is up and running the nightly will fair your way for testing.
Again, IF YOU ARE NEW OR FAINT OF HEART DO NOT FLASH THE NIGHTLY BUILD.
The nightlies are back up
Mikey1022 said:
The nightlies are back up
Click to expand...
Click to collapse
Thanks Mikey!
Sent from my T-Mobile G2 using XDA App
Yeah they've been up for almost 2 days I just didn't tell anyone since I didn't want them to get pulled again...
Thanks in advance, I should be getting the g2 this week. I probably won't test out any nightlies until after rc1, and even then maybe wait a little and see how it goes. So this will be where the nightly discussions are?
YES! Time to flash!
God I hope people don't pester devs with questions. . .
Questions/troubleshooting by users should be placed in here
I can't remember is there a change log link for the nightlies??
olearyp said:
http://buildbot.teamdouche.net/changelog/cm_vision_full/
shows build-to-build changes. For a longer span (if you're more than one version behind, or if there's one that fails to build) you can use:
http://buildbot.teamdouche.net/changelog/cm_vision_full/11..13
for instance. The ending version can be left off if you want to specify the latest nightly as the end point:
http://buildbot.teamdouche.net/changelog/cm_vision_full/11
Suggestions to improve this feature would be appreciated. Near term, I'd like to pull the oneline logs onto the buildbot page, but I haven't touched this in a little while.
Of course, you can also monitor @cmsrc or #cmsrc, and if you're good with the IRC channel you can even figure out which changes make which build.
Click to expand...
Click to collapse
Mikey1022 said:
Questions/troubleshooting by users should be placed in here
I can't remember is there a change log link for the nightlies??
Click to expand...
Click to collapse
Its just a Github link to cyanogens change log.
Do you know why Gapps wont flash?
For GAPPS just inject them into the ROM before flashing and it works
Metamorph hasn't worked since nightly 10...
Kazan22 said:
For GAPPS just inject them into the ROM before flashing and it works
Click to expand...
Click to collapse
I just used this: http://forum.cyanogenmod.com/topic/...n-of-nightlies/page__view__findpost__p__88772
I am running beautifully on CM Nightly 13 .
Mikey1022 said:
Questions/troubleshooting by users should be placed in here
I can't remember is there a change log link for the nightlies??
Click to expand...
Click to collapse
http://buildbot.teamdouche.net/changelog/cm_vision_full/
shows build-to-build changes. For a longer span (if you're more than one version behind, or if there's one that fails to build) you can use:
http://buildbot.teamdouche.net/changelog/cm_vision_full/11..13
for instance. The ending version can be left off if you want to specify the latest nightly as the end point:
http://buildbot.teamdouche.net/changelog/cm_vision_full/11
Suggestions to improve this feature would be appreciated. Near term, I'd like to pull the oneline logs onto the buildbot page, but I haven't touched this in a little while.
Of course, you can also monitor @cmsrc or #cmsrc, and if you're good with the IRC channel you can even figure out which changes make which build.
I could just be hallucinating but iirc cyanogen posted somewhere that the build should be compatable with the Z. I agree though, that place is a ghost town.
Sent from my T-Mobile G2 using XDA App
Running build 13 since 2 minutes after it came out and love it, everything works as far as I can tell including metamorph (just have system rw and it wont error out)
Sorry, but has anyone got this to work on the Desire Z?
The Desire Z forums are (relatively) quite empty at the moment.
Pickx said:
Sorry, but has anyone got this to work on the Desire Z?
The Desire Z forums are (relatively) quite empty at the moment.
Click to expand...
Click to collapse
This will work on a Z, im pretty sure as Cyan has expressed that explicitly
JD
I just tried at the latest Nightly and ive decided to hold of on CM into an RC comes out. Native USB Tethering and Portable Wi-Fi Hotspot isn't working. Wireless Tether for Root Users doesn't work either .
wifi hotspot is def working on the nightly 12
Akulamenuri said:
I just tried at the latest Nightly and ive decided to hold of on CM into an RC comes out. Native USB Tethering and Portable Wi-Fi Hotspot isn't working. Wireless Tether for Root Users doesn't work either .
Click to expand...
Click to collapse
My Wi-Fi tethering is working fine. I tested it yesterday and I am running CM Nightly build 13. I can't speak for usb tethering as I don't have a use for it and thus haven't tried it.
Akulamenuri said:
I just tried at the latest Nightly and ive decided to hold of on CM into an RC comes out. Native USB Tethering and Portable Wi-Fi Hotspot isn't working. Wireless Tether for Root Users doesn't work either .
Click to expand...
Click to collapse
Wifi tether works just find. Usb however does not.
Sent from my T-Mobile G2 using Tapatalk
First of all I want to make some things clear:
This is my own custom build I made with the help of this great tutorial: http://forum.xda-developers.com/showthread.php?t=775505
This has nothing to do with the offical nightly build from Cyanogen and his team.
I won't provide any support for this. If you want to flash this you should know what you do. Don't ask me anything like "How do I flash this?".
This could be even more unstable then the official nightly build since I add commits that are not merged. It's a great feature preview, but I can't guarantee anything. I can't tell you if the features you see here will make it into any official build.
What is it?
Its a custom build of the latest Cyanogen sources spiced up with some not (yet?) merged patches.
I don't know how often I will make new builds, it depends if I find new things I want to try. If there are no new commits that interest me I won't make a new build.
I will only upload builds that work for me. So the basic stuff should work for everyone, if it doesn't try to wipe before flashing. If it still doesn't work use the official nightly/RC/stable/whatever... (Thats the point with "I won't provide any support").
Difference to the official CM nightly
Download
MD5
I made something like this already for the Nexus One and many people liked it.
And since we don't get official nightlys since a long time already I thougt I start making my own nightlys again.
02/10/2012: new build, added latest commits from cm + cherry picked commits (again with AROMA Installer to choose WiFi calling)
02/04/2012: same build but with AROMA Installer. You can choose if you want to have WiFi calling or not before flashing the ROM.
02/01/2012: new build, added latest commits from cm + cherry picked commits
Thanks dude, good work.
I compiled my own CM7 Rom, but not sure how to apply those unapproved changes from the review platform, would u give me a hint ?
pentie said:
Thanks dude, good work.
I compiled my own CM7 Rom, but not sure how to apply those unapproved changes from the review platform, would u give me a hint ?
Click to expand...
Click to collapse
You need to cherry pick them
http://wiki.koha-community.org/wiki/Using_Git_Cherry_Pick
Why is anybody still screwing around with Android 2.3? This line is finished/dead/obsolete. Let it go already.
dhkr234 said:
Why is anybody still screwing around with Android 2.3? This line is finished/dead/obsolete. Let it go already.
Click to expand...
Click to collapse
How is it dead? 2.3 is what our phones can run most efficiently with speed and smoothness, 4.0 is still choppy and major graphical glitches. Not everyone wants an unstable rom which will not be at it's optimum until a while longer.
On the other hand, I will be trying this out and thank you for putting in your time and effort to bring us another rom to choose from
I noticed no wifi calling....
I noticed in your docs that wifi calling is not included, any chance of getting this added back in?
dhkr234 said:
Why is anybody still screwing around with Android 2.3? This line is finished/dead/obsolete. Let it go already.
Click to expand...
Click to collapse
Since ICS ROMs don't have camera fully working I wouldn't consider 2.3 dead. Many people including myself require a fully functional camera.
With that said I actually couldn't get camera and gallery to work on this ROM. I flashed it on top of stable CM 7.1.0 wiping only cache and dalvik.
I'm not going to do a full wipe at this point, neither am I looking for support but thought I would mention it.
dhkr234 said:
Why is anybody still screwing around with Android 2.3? This line is finished/dead/obsolete. Let it go already.
Click to expand...
Click to collapse
The Cyanogenmod team is still going to release CM 7.2. So they're also still "screwing" around with it.
dhkr234 said:
Why is anybody still screwing around with Android 2.3? This line is finished/dead/obsolete. Let it go already.
Click to expand...
Click to collapse
What???
You say that the version which works best on our phone is dead?
You mean 4.0 which brings us graphical glitches, no fully functional camera, bluetooth issues ... is better?
Lets talk about this in half a year again, but for now Gingerbread is the most stable and best performing version for our phones.
bradley_e_smith said:
I noticed in your docs that wifi calling is not included, any chance of getting this added back in?
Click to expand...
Click to collapse
Maybe I'll make an additional zip for wifi calling, I won't include it in the rom for sure since I can't use it.
Just a heads up...for some reason removing the wifi calling files breaks my APN connection with AT&T. Makes no sense on the surface. Put back both the apks and the libs and I've got signal again.
sisterchick said:
Just a heads up...for some reason removing the wifi calling files breaks my APN connection with AT&T. Makes no sense on the surface. Put back both the apks and the libs and I've got signal again.
Click to expand...
Click to collapse
Did you change something in the build.prop too?
Everthing works fine here, making calls, data connection...
Sent from my HTC Vision using Tapatalk
g4rb4g3 said:
Did you change something in the build.prop too?
Everthing works fine here, making calls, data connection...
Sent from my HTC Vision using Tapatalk
Click to expand...
Click to collapse
No, I didn't touch build.prop. I thought I may try it again tonight, removing the apks and libs one at a time to see what breaks the connection with AT&T.
sisterchick said:
No, I didn't touch build.prop. I thought I may try it again tonight, removing the apks and libs one at a time to see what breaks the connection with AT&T.
Click to expand...
Click to collapse
Weird, without changing the rilpath in build.prop the libs you pushed won't get loaded...
I'm curious which file is making you connection work again, please tell me when you found it out. Thanks!
Sent from my HTC Vision using Tapatalk
erichung_13 said:
How is it dead? 2.3 is what our phones can run most efficiently with speed and smoothness, 4.0 is still choppy and major graphical glitches. Not everyone wants an unstable rom which will not be at it's optimum until a while longer.
On the other hand, I will be trying this out and thank you for putting in your time and effort to bring us another rom to choose from
Click to expand...
Click to collapse
Agreed 2.3 is the most stable, ICS has a long way to go.
tarroyo said:
Agreed 2.3 is the most stable, ICS has a long way to go.
Click to expand...
Click to collapse
The key word you've used is STABLE.
No need to keep dicking around with what already exists. If you want to use it, fine. But there's nothing left worth adding to it, and DEVELOPERS NEEDED ON 4.0!!!
dhkr234 said:
The key word you've used is STABLE.
No need to keep dicking around with what already exists. If you want to use it, fine. But there's nothing left worth adding to it, and DEVELOPERS NEEDED ON 4.0!!!
Click to expand...
Click to collapse
Your bridge is waiting for you.
dhkr234 said:
The key word you've used is STABLE.
No need to keep dicking around with what already exists. If you want to use it, fine. But there's nothing left worth adding to it, and DEVELOPERS NEEDED ON 4.0!!!
Click to expand...
Click to collapse
Whoa bro, what's up with you? Any kind of development for our phone should be appreciated. ics is on its way. We already have 3 dev teams working on it. If g4rbag3 wants to work on something else and you don't like it, quit dicking around in his thread.
Since I saw some nice commits got merged I made an update.
g4rb4g3 said:
Since I saw some nice commits got merged I made an update.
Click to expand...
Click to collapse
This nigga knows !
#IgnoreTheHaters
Hey whats up everyone. After doing some research, and a gusty move, I read what people had to say in the link below:
Thanks goes to the thread of the GT-I9505 thread
http://forum.xda-developers.com/showthread.php?t=2341026
This link has the steps to install the S4 Google Edition (Full system Dump) to our T-Mo S4's.
It's a pretty small file, and as always, create a backup before you install. I wiped my themed stock rom, then flashed the GE sys dump.
I've confirmed the following:
* Camera works / Video
* LTE works
* Phone calls work
* NFC works
* SMS / MMS works
* Wi-Fi does NOT work
There's a couple of other tests that I didn't run, but I'm still getting a feel for this as I write this.
Any questions should be directed to the link above, not here. But i'm sure by grabbing that system dump, that we can work out the Wi-Fi issue, or leave it to our developers hands. Thanks everyone!
rainynight88 said:
Hey whats up everyone. After doing some research, and a gusty move, I read what people had to say in the link below:
http://forum.xda-developers.com/forumdisplay.php?f=2166
This link has the steps to install the S4 Google Edition (Full system Dump) to our T-Mo S4's.
It's a pretty small file, and as always, create a backup before you install. I wiped my themed stock rom, then flashed the GE sys dump.
I've confirmed the following:
* Camera works / Video
* LTE works
* Phone calls work
* NFC works
* SMS / MMS works
* Wi-Fi does NOT work
There's a couple of other tests that I didn't run, but I'm still getting a feel for this as I write this.
Any questions should be directed to the link above, not here. But i'm sure by grabbing that system dump, that we can work out the Wi-Fi issue, or leave it to our developers hands. Thanks everyone!
Click to expand...
Click to collapse
Did you try any of the WiFi fixes in the dump thread in the international forum?
lordcheeto03 said:
Did you try any of the WiFi fixes in the dump thread in the international forum?
Click to expand...
Click to collapse
Nope. Didn't get that far. I've trialed an error'd everything myself. I'll continue reading, but thought it'd be nice to have this for our community (if it's not already psoted).
rainynight88 said:
Nope. Didn't get that far. I've trialed an error'd everything myself. I'll continue reading, but thought it'd be nice to have this for our community (if it's not already psoted).
Click to expand...
Click to collapse
Well thanks for the contribution. I've been downloading for a while now, but my internet connection is so slow! Eh, I guess it gives me time to read. I've been through that thread twice already to see if I've missed anything. :\
Which kernel did you use?
lordcheeto03 said:
Well thanks for the contribution. I've been downloading for a while now, but my internet connection is so slow! Eh, I guess it gives me time to read. I've been through that thread twice already to see if I've missed anything. :\
Which kernel did you use?
Click to expand...
Click to collapse
Don't mention it - and be patient. It took about 5 mins on LTE to download for me in NYC. Let me know what you think or any findings you come across.
lordcheeto03 said:
Well thanks for the contribution. I've been downloading for a while now, but my internet connection is so slow! Eh, I guess it gives me time to read. I've been through that thread twice already to see if I've missed anything. :\
Which kernel did you use?
Click to expand...
Click to collapse
It seems like many are having luck with the Faux Kernel found here
C.Sweat said:
It seems like many are having luck with the Faux Kernel found here
Click to expand...
Click to collapse
Faux Kernel didn't do anything for the WiFi; at least not the one I used. I seem to have trouble downloading one that won't throw an error or show up as an invalid zip...
I believe I'm going to give this a few days before trying the Google experience.
Can't wait to get home and look more into this...tell us how it goes! Have you seen any extra features in there cause i mean it is going through samsung
Also, what kernel you ran with it? and your link point to a forum not specific thread
Confirmed working on T-Mobile variant. Flashing rom is all thats needed. Wifi is working
Google Edition Rom
source
C.Sweat said:
Confirmed working on T-Mobile variant. Flashing rom is all thats needed. Wifi is working
Google Edition Rom
source
Click to expand...
Click to collapse
Out of curiosity, what was done do to fix the WiFi?
lordcheeto03 said:
Out of curiosity, what was done do to fix the WiFi?
Click to expand...
Click to collapse
Yeah, I am also curious
Sent from my SGH-M919 using xda premium
C.Sweat said:
Confirmed working on T-Mobile variant. Flashing rom is all thats needed. Wifi is working
Google Edition Rom
source
Click to expand...
Click to collapse
+1
...and there you have it. Safe to say it's a fully working GE rom? Personally, I think so. All that's left is to see how the battery life turns out to be like compared to stock TW.
rainynight88 said:
+1
...and there you have it. Safe to say it's a fully working GE rom? Personally, I think so. All that's left is to see how the battery life turns out to be like compared to stock TW.
Click to expand...
Click to collapse
I hate having to work xD everyone beats me to everything. I downloaded the dump while at work to my cell phone. Now i am home and was gonna create a ROM but guess i don't have to xD
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
elesbb said:
I hate having to work xD everyone beats me to everything. I downloaded the dump while at work to my cell phone. Now i am home and was gonna create a ROM but guess i don't have to xD
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
Haha I did it while I was at work, too. No special kernels needed. Just as C.Sweat said, just download, backup, wipe, and flash.
My issue was that I downloaded the system dump from a different source link, thus im sure there was something corrupt or not compatible with the Wi-fi in that specific sys. dump. I'm not even going to do a logcat or any of that, especially if there's already a fully functional dump of the GE.
For those who want to install the Google Edition, please go here: https://docs.google.com/file/d/0BxsSDB2hKUxgZDFoR0xNdldLTW8/edit?usp=sharing
Maybe someone can dive into the rom and pull the GE photosphere camera and port it into the stock TW rom, instead of having to find working patches and stuff. I doubt it'll port over (maybe the gallery will) straight out of the sys. dump, but for those who wanna try - have at it .
Also, another thing to note is that Google Wallet fully works (of course without XPosures' patching), and we're not given that "It's not available for your provider" nonsense.
This rom = So much win!
twolfekc said:
Yeah, I am also curious
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
Not exactly sure what fixed the wifi issues. I was a bit late to the conversation. It happened somewhere around here http://forum.xda-developers.com/showthread.php?t=2341026&page=14
rainynight88 said:
+1
...and there you have it. Safe to say it's a fully working GE rom? Personally, I think so. All that's left is to see how the battery life turns out to be like compared to stock TW.
Click to expand...
Click to collapse
Very safe to say
Any idea why wifi did not work at first?
After installing the full system dump from GPe to TMo hardware... are there any software differences that remain between the devices? Kernel, etc? Or are they truly 100% identical? Thanks!
Haven't tried yet, but am anxious.
Anyone check NFC, IR Blaster yet?
I was just over at the AT&T GS4 forum and they are talking about some partition difference.
If that's the case, then some GBs of space will be wasted
Is there something like that on the T Mobile version too ?
rainynight88 said:
Maybe someone can dive into the rom and pull the GE photosphere camera and port it into the stock TW rom, instead of having to find working patches and stuff. I doubt it'll port over (maybe the gallery will) straight out of the sys. dump, but for those who wanna try - have at it .
Click to expand...
Click to collapse
Someone posted a recovery flashable ZIP in the I9505 forum.
http://forum.xda-developers.com/showthread.php?t=2340869
Is the kernel compatible OTB for M919 ?
NM: Just flashed it. Worked like a charm! Thank you to everyone from the guy/gal who provided the dump to all the people who uploaded to various sites. Oh and big thanks to Tmobile for keep note 2 and s4 similar to international variant.
I'm terrible with OPs.
I recently became the maintainer for all Galaxy Nexus devices for OmniROM. It came to my attention that toroplus (Sprint Galaxy Nexus) wasn't being built, and I felt terrible as I know how neglected you guys are over here. After a few fixes and tweaks and whatnot I was able to get it going and added to the nightly builds.
You can find information about OmniROM here:
https://omnirom.org/
You can find the builds here:
https://dl.omnirom.org/toroplus/
XDA:DevDB Information
OmniROM, ROM for the Samsung Galaxy Nexus
Contributors
MWisBest
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Beta
Created 2014-07-16
Last Updated 2014-09-16
Reserved.
excellent - my other phone, ns4g (crespo4g) is already on omnirom by adityaxavier.. was wanting to get my toroplus on an omniROM and i see this post today.. need to try it out.
Let me start by saying thank you! It's nice not to be forgotten. I actually downgraded from my Optimus G to the Galaxy Nexus about 3 months ago but haven't looked back since. I'm having a blast with all these awesome Roms while keeping up with the best of em.
I've been waiting for this for a long time! Thanks XD
Thank you. CyanogenMod hasn't had a quality build for us in months. This could convert some users.
Sent from my Galaxy Nexus using XDA Free mobile app
Any chance you guys would consider implementing the other style navbar with the ability to add from 5 custom buttons?...
A OTA come up on my phone data 7/26/14 i did the update and now my phone will not boot pass the Google logo, I try clear out the dalvik cache and cache, did not help. I had to re-flash 7/25/14 to get my unit to boot up again
ruff97 said:
A OTA come up on my phone data 7/26/14 i did the update and now my phone will not boot pass the Google logo, I try clear out the dalvik cache and cache, did not help. I had to re-flash 7/25/14 to get my unit to boot up again
Click to expand...
Click to collapse
Try a fresh install and then give some feedback. Sometimes updates don't work depending on what was changed in the latest nightly/update.
InfDaMarvel said:
Try a fresh install and then give some feedback. Sometimes updates don't work depending on what was changed in the latest nightly/update.
Click to expand...
Click to collapse
ok i did a clear install and work fine. so a new nightlies come out today so I install it and i am right back where I was with a blank screen after the googler logo. so every Nightlies will need to do a clear install now. i do not have this problem with my Note2.
just would like to know if this is going to normal so i will not flash Nightlies, I will wait to the end of the week or month to flash update
ruff97 said:
ok i did a clear install and work fine. so a new nightlies come out today so I install it and i am right back where I was with a blank screen after the googler logo. so every Nightlies will need to do a clear install now. i do not have this problem with my Note2.
just would like to know if this is going to normal so i will not flash Nightlies, will wait to the end of the week or month to flash update
Click to expand...
Click to collapse
That is not normal and should not be happening. I have not had this problem. How are you installing the updates?
musical_chairs said:
That is not normal and should not be happening. I have not had this problem. How are you installing the updates?
Click to expand...
Click to collapse
I am use TWRP 2.7.1.0
I used the automated system to update (which just calls TWRP) and I have no problems on today's nightly.
I think I'm about to stick to Omnirom. Seems more fluid, probably due to the lack of the theme engine.
Sent from my Galaxy Nexus using XDA Free mobile app
InfDaMarvel said:
I used the automated system to update (which just calls TWRP) and I have no problems on today's nightly.
I think I'm about to stick to Omnirom. Seems more fluid, probably due to the lack of the theme engine.
Click to expand...
Click to collapse
I actually slightly miss the theme engine. I'll be sticking with Omni for now though, it's been very solid. And my compass works, which it never did on CM11, it was always pointing the wrong way. Google Sky Map, which worked wonderfully on my old Droid Incredible, was a complete fail on my toroplus - on CM, that is. It also works just fine on Omni, probably due to the compass working correctly.
I've just been downloading the nightlies and installing them via TWRP, haven't used the automated system updates (I don't even know where that is.)
how is the data handshake handled in omni? is it pulled from CM?
Nothing but praise for this rom so far. Gaining usage of 3g to 4g data after oem 4.3 screwed it up was great to have again. Thanks. Hope to donate when I have some extra cash.
I tried to install Roam Ctrl to force roam only for when I am in a bad area, but it won't work. Is this omnirom related or galaxy nexus released it may seem? Anyone have any other options for forced roaming? Would be a great feature to incorporate in a future omni update.
been using the rom now the whole weekend, wished i would have switched over sooner, this is a great rom and 4g/3g works great, and really starting to like active notifcations!
Dammit! For all my other stuff on XDA I always get an e-mail when there's a reply, but they haven't been sending them out for this thread so I just assumed there wasn't any replies >.<! My bad!
uconnpat said:
Any chance you guys would consider implementing the other style navbar with the ability to add from 5 custom buttons?...
Click to expand...
Click to collapse
I'll definitely look into it, but I can't make any promises.
ruff97 said:
ok i did a clear install and work fine. so a new nightlies come out today so I install it and i am right back where I was with a blank screen after the googler logo. so every Nightlies will need to do a clear install now. i do not have this problem with my Note2.
just would like to know if this is going to normal so i will not flash Nightlies, I will wait to the end of the week or month to flash update
Click to expand...
Click to collapse
I'll check into this, I haven't done the incremental updates so I'll have to see what's up with them.
musical_chairs said:
I actually slightly miss the theme engine. I'll be sticking with Omni for now though, it's been very solid. And my compass works, which it never did on CM11, it was always pointing the wrong way. Google Sky Map, which worked wonderfully on my old Droid Incredible, was a complete fail on my toroplus - on CM, that is. It also works just fine on Omni, probably due to the compass working correctly.
Click to expand...
Click to collapse
The Cyanogen Inc. theme engine is very resource-hungry, and I'm in agreement with the OmniROM team's decision to not include it. Maybe in the future it'll be different, but for now it seems more like Cyanogen Inc. dumped this unfinished mess on the public to let them find the bugs and fix it rather than do it themselves before releasing it.
Disclaimer: This is just MY opinion and is not meant as a representation of an official OmniROM opinion in any way, shape or form.
Interesting to hear about the compass...
Insane PPC said:
how is the data handshake handled in omni? is it pulled from CM?
Click to expand...
Click to collapse
As far as I know, it is not pulled from Cyanogen Inc., which would probably be for the best.
jd14771 said:
Rom is GREAT! 3g/4g hand-off doing very well. no excessive heat, no excessive battery drain. The only thing for me is WIFI doesn't automatically connect to known networks.
Click to expand...
Click to collapse
Glad to hear everything is working out for ya.
I am aware of WiFi not automatically connecting, it'll do so after turning WiFi off and then on again however. That slight inconvenience probably helps save battery though, so it'd be cool to see if I can make it something configurable.
ryancell said:
Nothing but praise for this rom so far. Gaining usage of 3g to 4g data after oem 4.3 screwed it up was great to have again. Thanks. Hope to donate when I have some extra cash.
Click to expand...
Click to collapse
I wasn't even aware that the stock ROM was a mess with 4G data as well, yikes! You guys have really gotten the shaft it seems.
Any donation is greatly appreciated! Most donations I have received were invested into things to help with development, some examples would be: parts for fixing my Galaxy Nexus, a Bluetooth 4.0 adapter for my dev laptop to help with developing/debugging Bluetooth, microUSB cables (mine wear out all the time due to their constant usage!), Coca-Cola or Pepsi (whatever is on sale, I like 'em both) to keep me going when developing stuff, etc.
I can really stretch a little bit of money really far too: the Bluetooth 4.0 adapter (which includes really fast WiFi too, 300Mbps 802.11n :good I snagged for $15, and it's an Atheros! I constantly find 12 packs of soda on sale for $3 each, sometimes even $2.50 each. $5 can get me 24 cans of soda!!
If you do donate, consider doing it with Google Wallet if you can. PayPal charges some pretty ridiculous fees, Google Wallet doesn't have any fees, so a $5 donation via Google Wallet is $5 when I receive it, but a $5 donation via PayPal ends up being more like $4.50. I've got credit/debit/whatever cards linked to Google Wallet and PayPal, so I can use them wherever regardless of whether or not they're accepted as official payment methods somewhere too
ryancell said:
I tried to install Roam Ctrl to force roam only for when I am in a bad area, but it won't work. Is this omnirom related or galaxy nexus released it may seem? Anyone have any other options for forced roaming? Would be a great feature to incorporate in a future omni update.
Click to expand...
Click to collapse
Are you talking about:
Settings --> More... (under the Wireless & Networks heading) --> Mobile Networks --> Data Roaming?
Insane PPC said:
been using the rom now the whole weekend, wished i would have switched over sooner, this is a great rom and 4g/3g works great, and really starting to like active notifcations!
Click to expand...
Click to collapse
I'm really surprised at how well everything is working on toroplus!! I thought 90% of the replies here would be serious issues or something...
Installed the latest nightly after a wipe. I can't get LTE to work. After the flash I had 3G and it was set on the 2G/3G Preferred setting, I changed it to LTE an immediately got some infinite loop of "Android Phone has stopped running" or similar.
Now when I toggle it to LTE I get no data, I'll get a signal indicator but I get no data at all. Any ideas?
edit: the *#*#DATA#*#* code pops up a "com.android.phone has stopped" error when I click Edit. I'm using the GApps as recommended in the OmniROM wiki.
edit: I've also noticed when I update PRL or Profile I get "Error: (Code:1)Internal Error" each time, could be related?
Hi ! im looking forward to change my rom and i wanted to know if specificly the xt2051-1 had one (cuz thats the one i have) i cant find any anywhere for it and i dont want to go for another versions rom cause i dont want my phone to f up i got my phone rooted and installed twrp on it ,my manager is magisk i am confortable with command lines even tho im learning + is there any programs i should use on my pc in case my phone decides to fudge?
thanks for the help
thanks for helping newbies like me
Considering you just got yours,we can assume that it has the new touch screen,so afaik the only rom that will work with touch is this one
https://build.lolinet.com/file/lineage/ginna/lineage-18.1-20210612-HOMEMADE-ginna.zip
This is electimons modded here on xda,and as far as i know nobody else has updated for the new touchscreen
timjames474 said:
This is electimons modded here on xda,and as far as i know nobody else has updated for the new touchscreen
Click to expand...
Click to collapse
A dev uploaded an unofficial 17.1 to AFH(1) w/ the new display driver a couple weeks back. It works great, except no audio besides during phone calls or when using headphones(or BT?, IDK).
I recently stumbled upon AlaskaLinuxUsers tutorial+videos(2) on how to setup & compile custom ROMs. Am in the process of setting up an Ubuntu workstation with 4th gen i5, 8GB DDR3, 2TB SSD & slow internet. It will take some time, apparently. My goal is to get this 17.1 working w/ new display &/or the working 18.1 w/ new display sans gapps. IDK if I will achieve a bootable ROM, but it looks like it's my only path, as outside of Electimon(3), not a lot of development is going on w/ Ginna anymore. Will post progress/results, if any is gained.
1
lineage-17.1-20210608-UNOFFICIAL-ginna.zip | ROM by elisam98 for Moto e 2020
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
2
[Guide][Video Tutorial] How to build Custom ROMs and Kernels![10,P,O,N,M,L]
Hey everyone! There is also a telegram channel where you can drop in for some help: https://t.me/joinchat/HR_8JgyDBdw_DvmndPl0kg I really hope that you have enjoyed the series, and that it was helpful to you in your Android career! Praise...
forum.xda-developers.com
3
Nothing but respect & gratitude for E's work. Am a long-time fan. However, his build contains Gapps & I don't want them.
Understandable if you get one going let me know because I'm currently on stock due to camera issues and I would love a ROM sans g apps especially if you would put sig spoof in for micro g
Just before i do something i just want to know if AOSP has a rom for that phone already cause its my fav rom of all time but if i have to port it myself is there any guidelines i could find on how to port/create custom roms ?
Imaunicorn666 said:
Just before i do something i just want to know if AOSP has a rom for that phone already cause its my fav rom of all time but if i have to port it myself is there any guidelines i could find on how to port/create custom roms ?
Click to expand...
Click to collapse
Two posts before yours, link #2.
I have been delayed... unidentified bug bite put me out of service for a bit. Wild f'n ride. Got Ubu w/s setup, will start provisioning/downloading tonight.
After ~14 hours downloading(multiple nights @ < 1MB/s... aggregating > 50 GB) on my wireless plan, I am yet to achieve a 100% sync of the LOS repo. After hitting the MU Throttle Threshold on last month's plan, I must concede defeat at this point as I cannot afford to jeopardize my only home inet option available for another 30 days(extreme rural living, no landlines or line-of-sight options). Sigh.
my schedule is full of other things but i will take a look at the links posted and attempt to to builds as it. LOS sans GAPPS sounds like a dream. currently I use 18.1 modded and manually degoogle it. its not so fun everytime i reset :/
Any update on a XT2051-1 with the new screen and no GAPPs
roycrt said:
Any update on a XT2051-1 with the new screen and no GAPPs
Click to expand...
Click to collapse
FWIW, I should have an internet connection capable of down/uploading in the next 2 weeks, at which time I will begin failing to compile until I succeed. Hopefully, on all points.
It seems like rolling the old 17.1 w/ the new display driver would be pretty straightforward, but a lot of ignorance is wrapped in that statement.
googleverifysux said:
FWIW, I should have an internet connection capable of down/uploading in the next 2 weeks, at which time I will begin failing to compile until I succeed. Hopefully, on all points.
It seems like rolling the old 17.1 w/ the new display driver would be pretty straightforward, but a lot of ignorance is wrapped in that statement.
Click to expand...
Click to collapse
Thank You googleverifysux! Just got the phone and would really like to degoogle it, then not worry for awhile