Hi,
Just brought my note II three days ago, and looking to update on 4.3. Phone was rooted, Philz installed, stock rom installed (this on : http://forum.xda-developers.com/showthread.php?t=2605464).
After boot I didn't have wifi, so I follow the instructions to install the bootloader, and after that impossible to boot and impossible to flash again.
I don't know if it's because the bootloader is locked or the NAND is corrupted.
I tried to flash with original stock to fix, but same result, always the same result.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUEMK8_N7100OXAEMK1_N7100XXUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
[COLOR="DarkOrange"][B]<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL![/B][/COLOR]
<OSM> All threads completed. (succeed 0 / failed 1)
There are two things You can try.... Flashing using hemdall recovery or else try flashing the firmware along with the modem file. It worked for me. Do try this after re-installing the Samsung USB driver.
Sent from my GT-N7100 using XDA Premium 4 mobile app
I will look for thx.
Do you have a link for the firmware + modem you installed please.
The modem is integrate the TAR I downloaded I guess (got it from sammobile).
Since my S2, it's first time I have a problem, usually I found the answer on the forum or internent, but not this time.
Zubair1024 said:
There are two things You can try.... Flashing using hemdall recovery or else try flashing the firmware along with the modem file. It worked for me. Do try this after re-installing the Samsung USB driver.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes you find the modem you were using and flash it with the rom in Odin. Next time if Wi-Fi doesn't turn on don't flash the bootloader instead Flash Dr ketan's Wi-Fi patch zip file in recovery. It worked for me.
Sent from my GT-N7100 using xda premium
Code:
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
[B][COLOR="DarkOrange"]<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> FAIL![/COLOR][/B]
<OSM> All threads completed. (succeed 0 / failed 1)
That didn't work u.u
I tried to flash Stock ROM + MODEM, MODEM alone, always the same problem. (I used odin3.07)
I will try with the other soft, but I have to look for the tar.gz or change my tar.md5 to tar.gz (...but not with windows, i'm not confident in it for that -_-)
Related
Hi everyone
Got a N7105 from someone who requested assistance to reflash his HP. The clown din know what he was doing, so there goes...
'Firmware upgrade encountered an issue. Please select recovery mode from KIES and try again' is displayed when powered up. Tried to connect to KIES but it does not detect the phone even when windows has installed the drivers. Re-installed drivers also no use.
Able to go into download mode and this is what I see:
-------------------------------------------------------------------------------
PRODUCT CODE: GT-N7105
CUSTOM BINARY DOWNLOAD: YES (39 COUNTS)
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
KNOX WARRANY VOID: 1
RP SWVER: A2
--------------------------------------------------------------------------------
Connected via Obin and tried to restore it with stock rom but it refused to flash it. Been trying the whole night. Anyone knows how to solve this?
What error do you get when you try to flash with odin?
Sent from my GT-N7105 using xda app-developers app
thedadio said:
What error do you get when you try to flash with odin?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7105XXDMB3_N7105OLBDMC1_N7105DXDLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
that's the error msg i got..
thedadio said:
What error do you get when you try to flash with odin?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7105XXDMB3_N7105OLBDMC1_N7105DXDLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
that's the error msg i got..
no one?
yagami34 said:
no one?
Click to expand...
Click to collapse
flash back the official 4.3 rom..you can not flash 4.1.2 rom
yagami34 said:
Hi everyone
Got a N7105 from someone who requested assistance to reflash his HP. The clown din know what he was doing, so there goes...
'Firmware upgrade encountered an issue. Please select recovery mode from KIES and try again' is displayed when powered up. Tried to connect to KIES but it does not detect the phone even when windows has installed the drivers. Re-installed drivers also no use.
Able to go into download mode and this is what I see:
-------------------------------------------------------------------------------
PRODUCT CODE: GT-N7105
CUSTOM BINARY DOWNLOAD: YES (39 COUNTS)
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
KNOX WARRANY VOID: 1
RP SWVER: A2
--------------------------------------------------------------------------------
Connected via Obin and tried to restore it with stock rom but it refused to flash it. Been trying the whole night. Anyone knows how to solve this?
Click to expand...
Click to collapse
Maybe you should try this:
http://forum.xda-developers.com/showpost.php?p=47936346&postcount=20
I'd solved the same problem yesterday.
I've had the same issues happen as well. Kies fails, as well as Odin. Both Odin 1.85 and the newer 3.09 (?) fail for me well. I have posted several different posts but have not found any solutions. I've become too paranoid to attempt custom ROMs, even a root my device.
My only suggestion is to keep trying. The last time I had my issue I had close to 20 failures before it finally flashed the stock firmware.
Sent from my SGH-I317M using xda app-developers app
HELP my Sprint GS3 is stuck in odin mode
ODIN MODE
PRODUCT NAME; SPH-L710
CURRENT BINARY; CUSTOM
SYSTEM STATUS; CUSTOM
QUALCOMM SECUREBOOT; ENABLE
WARRANTY BIT; 1
BOOTLOADER AP SWREV; 2
I can get to download mode with the three button combo, but i cant flash to stock, when i do it reads
ODIN MODE
PRODUCT NAME; SPH-L710
CURRENT BINARY; CUSTOM
SYSTEM STATUS; CUSTOM
QUALCOMM SECUREBOOT; ENABLE
WARRANTY BIT; 1
BOOTLOADER AP SWREV; 2
SW REV CHECK FAIL ; FUSED 2 > BINARY 1
and in odin it says
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_L710VPUCMK3_L710SPRCMK3_2034598_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Is there anyway to fix my phone, ive been trying now for about 3 months to get it, and nothing works
guy with phone said:
HELP my Sprint GS3 is stuck in odin mode
ODIN MODE
PRODUCT NAME; SPH-L710
CURRENT BINARY; CUSTOM
SYSTEM STATUS; CUSTOM
QUALCOMM SECUREBOOT; ENABLE
WARRANTY BIT; 1
BOOTLOADER AP SWREV; 2
I can get to download mode with the three button combo, but i cant flash to stock, when i do it reads
ODIN MODE
PRODUCT NAME; SPH-L710
CURRENT BINARY; CUSTOM
SYSTEM STATUS; CUSTOM
QUALCOMM SECUREBOOT; ENABLE
WARRANTY BIT; 1
BOOTLOADER AP SWREV; 2
SW REV CHECK FAIL ; FUSED 2 > BINARY 1
and in odin it says
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_L710VPUCMK3_L710SPRCMK3_2034598_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Is there anyway to fix my phone, ive been trying now for about 3 months to get it, and nothing works
Click to expand...
Click to collapse
what Odin version are you on?? i saw it say Odin 3.....but are you on the latest one?
Like he said what version is your odin? Also i see you are trying to flash MK3. Are you sure the phone does have NDC or ND8?
Sent from my SPH-L710 using XDA Free mobile app
jbnorton0524 said:
Like he said what version is your odin? Also i see you are trying to flash MK3. Are you sure the phone does have NDC or ND8?
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
im using odin 3.07 i have no idea what it is, this is the only restore file i could find, anywhere, im a newbie in this feild
Please halp me!
Look here
Go there for latest software (tar file to flash in odin) and good instructions.
Sent from my SPH-L710 using XDA Free mobile app
jbnorton0524 said:
look here
go there for latest software (tar file to flash in odin) and good instructions.
Sent from my sph-l710 using xda free mobile app
Click to expand...
Click to collapse
it ****ing worked, im so happy, thank you so much
Good deal. Glad i could help.
Sent from my SPH-L710 using XDA Free mobile app
Hi, i have a GT-N5100 running 4.4.2 Kitkat
My problem is i can't boot to recovery and it says:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again later.
But i can boot in Download Mode.
My phone keeps blinking and it won't charge, so, I've tried to flash the stock rom via ODIN and it says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5100XXDNG2_N5100OXEDNG1_N5100XXDNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
While flashing the ROM, i saw this code:
Code:
KNOX WARRANTY VOID 0
RP SWREV A1
And I've tried several times, but it always FAILS!
I've tried to go to Recovery mode through Kies,
>Firmware Upgrade and Initialisation >Type the Model Name: and it did not detect the Phone.
Hoping that someone can help me with this. Thanks guys!
rongregoryred said:
Hi, i have a GT-N5100 running 4.4.2 Kitkat
My problem is i can't boot to recovery and it says:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again later.
But i can boot in Download Mode.
My phone keeps blinking and it won't charge, so, I've tried to flash the stock rom via ODIN and it says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5100XXDNG2_N5100OXEDNG1_N5100XXDNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
While flashing the ROM, i saw this code:
Code:
KNOX WARRANTY VOID 0
RP SWREV A1
And I've tried several times, but it always FAILS!
I've tried to go to Recovery mode through Kies,
>Firmware Upgrade and Initialisation >Type the Model Name: and it did not detect the Phone.
Hoping that someone can help me with this. Thanks guys!
Click to expand...
Click to collapse
Use Odin v3.07 and flash in PDA mode. Also, make sure you have the right tar file for your Note and turn Kies off so it doesn't interfere with Odin.
CCallahan said:
Use Odin v3.07 and flash in PDA mode. Also, make sure you have the right tar file for your Note and turn Kies off so it doesn't interfere with Odin.
Click to expand...
Click to collapse
Thanks! I will try that! :good:
Edit: Fail. Did'nt work also. Hmm. I will try kies again.
rongregoryred said:
Thanks! I will try that! :good:
Edit: Fail. Did'nt work also. Hmm. I will try kies again.
Click to expand...
Click to collapse
If you are sure you have the correct file for your device and are using Odin correctly, might try using Heimdall to flash instead of Odin: http://glassechidna.com.au/heimdall/
I had a similar problem with my note 8.0. I can't remember exactly what I did but I managed to get it to reboot. It'll reboot to download but after it booted into download mode my Odin was able to find it.
---------- Post added at 09:19 PM ---------- Previous post was at 09:03 PM ----------
I think maybe holding down the power button should reboot it.
CCallahan said:
If you are sure you have the correct file for your device and are using Odin correctly, might try using Heimdall to flash instead of Odin: http://glassechidna.com.au/heimdall/
Click to expand...
Click to collapse
Tried heimdall, but no work. I think it's because of Knox. It won't flash Stock rom through Odin or heimdall.
BTW, i flashed a recovery through Odin and it works. Now im running a Custom Rom. Thanks for the help guys!
I'm currently in the same situation
What recovery did you flash?
I odin 4.4.4 poland.. it failed, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies
I can't go to recovery, I tried to odin recovery but no luck
and in odin mode it says Secure Download : enabled
EDIT: I use philz_touch_6.48.4-n5100.tar.md5.. and it works
Our daughter deleted all of the pics on my wife's phone. She tried to use Dr. Fone, but someone told us that it failed because her phone wasn't rooted. So I tried to root it from this post on cnet:
It failed during the root. Now it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. Which I tried and also failed.
After a lot of heart ache and hours working on it, i have what a friend told me was the right tar file. I have attached the error in Odin.
When I run the tar file in Odin here is what the output screen shows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then my phone screen show this:
SW REV CHECK FAIL : Fused 3 > Binary 0
Not really my area of expertise at all. Any help would be appreciated!!
Thanks,
Brian
You cannot flash that tar file onto your phone. It is failing because that file is trying to downgrade the bootloader.
I recommend not flashing anymore files until you know the bootloader version of your phone.
I recommend you flash the latest Philz Touch custom recovery using desktop Odin from here:https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Use Philz to flash the latest CM11 and Gapps. Then install the Samsung Phone Info app from the play store to verify your bootloader.
Once you know your bootloader, let us know the version.
So I followed the instructions here i found on google by searching "how to how to root s6 edge plus", second link down... and it was a bad idea. Now my phone will boot, and show the lock screen for a second or two, and then just reboot. So I'm stuck in a bootloop. I'm fairly new to the android rooting scene (I've been jailbreaking iPhones sice 2007). What do I do? I tried restoring the default firmware in Odin but it didn't work. HELP!
hereisalex said:
So I followed the instructions here i found on google by searching "how to how to root s6 edge plus", second link down... and it was a bad idea. Now my phone will boot, and show the lock screen for a second or two, and then just reboot. So I'm stuck in a bootloop. I'm fairly new to the android rooting scene (I've been jailbreaking iPhones sice 2007). What do I do? I tried restoring the default firmware in Odin but it didn't work. HELP!
Click to expand...
Click to collapse
Your phone is not bricked.
Best bet is to odin flash the official stock firmware and then go into recovery mode.
When in recovery do a factory reset.
Then reboot the phone.
After doing the above the phone will work fine.
Good luck,
Have a nice evening.
Sent from my SM-G928T using Tapatalk
Thank you for responding. I've done that, and it's failing. I tried to post a screenshot but XDA won't allow me since I"m a new user. So here's a transcript:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Perhaps I'm not using the right file? I have 20150409165121\G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5 if that means anything.
Thank you again for your help.
Misterjunky said:
Your phone is not bricked.
Best bet is to odin flash the official stock firmware and then go into recovery mode.
When in recovery do a factory reset.
Then reboot the phone.
After doing the above the phone will work fine.
Good luck,
Have a nice evening.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
hereisalex said:
Thank you for responding. I've done that, and it's failing. I tried to post a screenshot but XDA won't allow me since I"m a new user. So here's a transcript:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Perhaps I'm not using the right file? I have 20150409165121\G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5 if that means anything.
Thank you again for your help.
Click to expand...
Click to collapse
Here is the correct firmware and download link for the S6 EDGE+ phone.
https://www.androidfilehost.com/?fid=24052804347822287
Good luck.
Sent from my SM-G928T using Tapatalk
Misterjunky said:
Here is the correct firmware and download link for the S6 EDGE+ phone.
==========================================================
Good luck.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
Thank You! Now, if I do get my phone back up and running, how can I root it? I don't need any custom ROM or anything, I just want root permissions.
hereisalex said:
Thank You! Now, if I do get my phone back up and running, how can I root it? I don't need any custom ROM or anything, I just want root permissions.
Click to expand...
Click to collapse
Yes you can, follow the link below for full instructions .
http://forum.xda-developers.com/s6-edge-plus/development/arter97-kernel-galaxy-s6-edge-plus-t3189913
Good luck..
Sent from my SM-G928T using Tapatalk
It's still not working. It will boot up, play the T-Mobile jingle, and show me the lock screen, and then reboot after about half a second. This repeats indefinitely. Please help?