Since it's designed to fit the seidio surfsce case which is about 1mm or so thick it seems as though it might fit any thin-fitting case fairly well. The holsters top clip is spring tensioned and i think it will clamp down on the top of the phone in the Ringke Slim case too.
Anybody try this or a similar combo before?
Related
Is this possible? im looking to see if i can cutout a gel case to fit the extended battery. I have 2 holsters... one fitted for a regular hard case... and another one for a naked pre. If cutting out a gel skin can fit inside the holster with the hard case... then i will return the naked holster... if not vice versa.
Any one experimented with this? i love the holster but i need some side and corner protection!
I wanna see if the SILICRYLIC or double case fits into the seidio holster, i have the otterbox defender but its a little too bulky for my liking.
don't know about the silicrylic case but the otterbox commuter fits great in the active holster, and even fits the surface holster altho not as well. tpu cases can generally be made to fit the surface holster fairly well with a little bit of snugging up. using that...
IMHO.. it looks like the silicrylic is commuter/active format case so i'd guess it would fit better in the active holster.
The title says it all. I am looking for a quality leather holster that is large enough to fit the GSIII with a TPU case on it.
The Seidio Surface holster will do the job.
Thank you but I already have this holster and while it does do the job, I'd prefer a leather pouch. I don't like having to clip my phone in to a plastic holster.
I just bought the spigen slim armor case and am having a very difficult time finding a belt pouch that fits.
I measured out the dimensions with the case on and it is 5 3/4" x 3" x 1/2"
i am also thinking about maybe getting a pouch that was made for a different phone that is slightly larger than the nexus 5.
anyone have any luck?
Update: looks like no one responded to me but i'll post this anyway...in case anyone is interested
http://www.amazon.com/Luxmo-Horizontal-Leather-Holster-Carrying/dp/B008FQVO5G/ref=lh_ni_t?ie=UTF8&psc=1&smid=A119K31BOSN2QF
I bought this pouch and it is a perfect fit for the Nexus 5 + slim armor case...the dimensions are 5.9" x 3 x 1 which was the closest ive found so i took and chance and it was a great choice..you can get it for like $5 but i went with the seller that had it for $7 (prime shipping)
Just came across this - do you think it'd have enough room for a bigger case? I have the Ringke Fusion which isn't a very thick case, but it's thicker than the spigen slim.
Also how has it held up? I can be a bit rough on my belt loop cases (keep getting caught on seatbelts and such) and I had one like that rip on me after a couple of weeks.
Thanks in advance
JosephD1014 said:
Just came across this - do you think it'd have enough room for a bigger case? I have the Ringke Fusion which isn't a very thick case, but it's thicker than the spigen slim.
Also how has it held up? I can be a bit rough on my belt loop cases (keep getting caught on seatbelts and such) and I had one like that rip on me after a couple of weeks.
Thanks in advance
Click to expand...
Click to collapse
Is the Ringke Fusion bigger up/down or just thickness? If it's thickness it should be fine.. There is some wiggle room there... But of course I can't guarantee you
You should measure it and compare it to the dimensions I posted above
The belt loops are pretty durable.. There are two loops and a metal clip... Very sturdy
Sent from my Nexus 5
jdiddy_ub said:
Is the Ringke Fusion bigger up/down or just thickness? If it's thickness it should be fine.. There is some wiggle room there... But of course I can't guarantee you
You should measure it and compare it to the dimensions I posted above
The belt loops are pretty durable.. There are two loops and a metal clip... Very sturdy
Sent from my Nexus 5
Click to expand...
Click to collapse
I'm currently using a Seido Dilex holster with my Ringke Fusion and it fits perfectly. I got tired of trying to find a pouch that will fit. As for your case, I would look into the holster for their covert case, you'll just need to know the thickness of the case to see if there's any wiggle room or will it fit snug.
Just my thoughts.
Is there anything like that that will hold the phone vertically and not horizonally? Doesn't have to be a complete pouch, but just some kind of 'cage' that holds the phone+slim armor case on a belt, but vertical.
paradoxiumwind said:
Is there anything like that that will hold the phone vertically and not horizonally? Doesn't have to be a complete pouch, but just some kind of 'cage' that holds the phone+slim armor case on a belt, but vertical.
Click to expand...
Click to collapse
just measure the dimensions that search for a phone case that fits it vertically...horizontal one that i bought is for the S3 and it fits...so you can start by trying to search for S3 vertical pouches
paradoxiumwind said:
Is there anything like that that will hold the phone vertically and not horizonally? Doesn't have to be a complete pouch, but just some kind of 'cage' that holds the phone+slim armor case on a belt, but vertical.
Click to expand...
Click to collapse
Look at these two holsters Seidio. I don't work for them, just love the holsters. They do rotate as well. The Surface holster will fit case that are less than 2mm thick and the Dilex will fit cases that are less than 2.2mm thick (Ringke Fusion needs the Dilex due to the "feet" of the case) I'm assuming the Dilex is need for the slim armour case as well, I can't find the thickness of the case.
Just wondering if anyone has tried to match the two of these together....
I purchased a Diztronic TPU case for my Nexus 5 - I would like to place it into a Seidio Surface holster while I am at work.
Does anyone know if the Diztronic and the Seidio holster work together with the Nexus 5?
Thanks
Well my Surface holster just showed up tonight and my guess is it would be a no go. The stock bumper case fits but extremely tight on the bottom. My Ringke fusion case is a little more snug then the official bumper case. Both are a little to thick. Prefect fit side to side and height wise. I had an active holster and Ringke e fusion for my N4 and was sloppy so I figured I would try the surface holster. Taking my holster in to work tomorrow and pull out the die grinder and do some trimming and I think it will fit perfectly after take a little bit out of the bottom of the holster. I hope this helps you out.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Thanks for the input and just wondering if others have found a solution. Keep me updated on your mods.....
Dekan54 said:
Thanks for the input and just wondering if others have found a solution. Keep me updated on your mods.....
Click to expand...
Click to collapse
I use a Seidio Surface holster with my cruzerlite cases without problems. see my attached pic
yocubed said:
I use a Seidio Surface holster with my cruzerlite cases without problems. see my attached pic
Click to expand...
Click to collapse
@yocubed
That is what I would like to do except with a Diztronic TPU case - Just wondering if anyone else has these two and how they work / fit together.
Thanks
Dekan54 said:
@yocubed
That is what I would like to do except with a Diztronic TPU case - Just wondering if anyone else has these two and how they work / fit together.
Thanks
Click to expand...
Click to collapse
I don't have the Diztronic case but I did have both the Cruzerlite and Diztronic cases for my EVO 4G LTE and they both worked flawlessly with the seidio surface holster for that phone. My assumption is that the Diztronic would work fine with the surface holster like the cruzerlite cases do
yocubed said:
I don't have the Diztronic case but I did have both the Cruzerlite and Diztronic cases for my EVO 4G LTE and they both worked flawlessly with the seidio surface holster for that phone. My assumption is that the Diztronic would work fine with the surface holster like the cruzerlite cases do
Click to expand...
Click to collapse
I just got the Diztronic TPU for my Verizon LG G2, and it fits PERFECTLY in the Seidio Surface holster!!!! The Nexus 5 is basically the same phone as the G2, so I am 99% sure it will be fine for you.
I would point out that the only thing that's a little awkward is that the non-slip "grip" of the TPU material is so grippy that you can't easily "pop the phone in" past the hinged clip - you have to lift the hinge back with one finger, put the phone in, and then let the clip spring back over the phone. Not a big deal, but just "different". I guess I'll have to learn a new hand motion.