Nite Ize Clip Case Sideways review - Nexus 5 Accessories

I didn't see any information on here on the Nite Ize Clip Case Sideways XL (that's really the product name), so I'd thought I post a quick review.
First, a link to the manufacturer's website and an Amazon.com page:
http://www.niteize.com/product/Clip-Case-Sideways.asp
http://www.amazon.com/Nite-Ize-CCSXL-03-01-Clip-Sideways/dp/B00F36YKFC/ref=pd_bxgy_cps_text_z
Carrying my Nexus 5 - wrapped in an Ionic Guardian case - in my pocket just doesn't work. The phone is just too damn big. Wearing standard 4-pocket jeans, I doubt that I would be able to sit down with the phone in any of the pockets, and a set of keys would probably tear the face of the phone up. I will not wear a fanny pack, no matter how fashionable they are. Short of having a tailor sew an extra cargo pocket on all my trousers and shorts, I needed to find a better solution.
The Nite Ize Sideways XL definitely fits the Nexus 5 WITH the Ionic cover. It's a horizontal-carry only case. The case has elastic sewn-in the ends to check to the phone's horizontal movement; the phone lightly touches these stops, and horizontally it's a good fit. the vertical height of the case is about 1/4" (7mm) proud with the phone in and the velcro closure (more on that in a bit) centered; the case could be a 1/4" vertically shorter for a perfect fit, but there is some adjustment in the closure, so I can live with it. This case will probably fit most, if not all, Nexus 5 protective covers.
Features:
Colors: Black (purchased), Mossy Oak Break-Up Infinity (for dance night, I guess), and Espresso (a dark brown fabric with black trim).
Construction: The fabric appears to be ballistic nylon with faux-leather accents. There's an thin internal pocket on the clip-side of the case that can readily accept credit cards, identification cards, folded currency, etc. The exterior ballistic nylon is backed internally by soft fabric; the case covers the phone completely. The case appears very durable and protective for the phone. With the "lid" of the case closed, the case is locked "solid".
Clip: A fairly wide black plastic clip. It will easily fit a 2" (5 cm) belt. As previously stated this is a horizontal-only case; the clip doesn't rotate. One advantage of the fixed clip is that it creates a much thinner clip. The clip has a hook on the bottom; once it snaps over a belt, it stays put. I've had to fish my other cases (with phones in them) from the seats of cars and chair cushions because the act of sitting-down pushed the case up and off my belt when carried on the small of my back; no issue here.
Closure: Hook-and-loop (Velcro). Either you love Velcro, or you hate it. The folks I know who carry gear on their belts (military, police, rescue workers, corrections officers, etc.) swear by Velcro. I can live with it, it's just a little loud sometimes. It's probably not as loud as my annoying ringtone, so most people never hear the holster opening.
Cost: $13.49 (US), and free Super-Saver shipping.
Gripes: Not really any major gripes. One (minor) gripe would be the lack of a cutout on the bottom of the case so the wearer can push the phone up when pulling the phone from the case. The case is designed to protect the phone, so I can't blame the manufacturer. With the elastic sides and flexible ballistic nylon construction, I can slide my fingers between the interior wall of the case and the phone and pull the phone out of the case easily enough, so it's not really an issue.
Final thoughts: Nite Ize has a good reputation for making tough gear. Read reviews for any of their products; customers love the build quality and durability. It's one of the few options for carrying a hybrid-cased Nexus 5.

Related

[Q] Innocase for Droid 2 - "Now shipping"

According to Seidio's online store their Innocase is now shipping. Innocase is well reviewed for other phones. Anyone have comments on their new Droid 2 version?
Otterbox is coming out with one soon, its posted on the website. I'm excited for that. I honestly prefer Otterbox over Innocase.
kwheel596 said:
Otterbox is coming out with one soon, its posted on the website. I'm excited for that. I honestly prefer Otterbox over Innocase.
Click to expand...
Click to collapse
Was gonna buy the seidio, till I saw the otterbox case... now I don't know which to get
Innocase on the way
The Otterbox case seems similar to Innocase i.e. polycarbonate shell with a thin rubber-like coating to aid gripping. I already have a screen protector in place (and a spare) so I didn't need it (included with Otterbox).
Other cases I read about had issues with the slide keyboard. Either the case interfered with sliding or it was thick enough to block some of the top row of keys.
I went ahead and ordered the Innocase combo..... Innocase plus belt holster. Should arrive in a few days. I will post my impressions of the case.
oldcyberdude said:
The Otterbox case seems similar to Innocase i.e. polycarbonate shell with a thin rubber-like coating to aid gripping. I already have a screen protector in place (and a spare) so I didn't need it (included with Otterbox).
Other cases I read about had issues with the slide keyboard. Either the case interfered with sliding or it was thick enough to block some of the top row of keys.
I went ahead and ordered the Innocase combo..... Innocase plus belt holster. Should arrive in a few days. I will post my impressions of the case.
Click to expand...
Click to collapse
yeah, I tried one of the verizon OEM cases, and it definitly hindered the opening of the keyboard, and the top row. Enough so that I have serious doubts about whether any case will not have this problem.
Also I've had the misfortune to already drop my phone (albeit short drop), and whatever the material that surrounds the screen is EXTREMELY brittle, and shattered off a fair number of chunks.
That being said, I think I'll probably just wait on a case until perhaps my phone starts "having lots of problems" a week or so before the warranty is up and I have to get a replacement one.
oldcyberdude said:
The Otterbox case seems similar to Innocase i.e. polycarbonate shell with a thin rubber-like coating to aid gripping. I already have a screen protector in place (and a spare) so I didn't need it (included with Otterbox).
Other cases I read about had issues with the slide keyboard. Either the case interfered with sliding or it was thick enough to block some of the top row of keys.
I went ahead and ordered the Innocase combo..... Innocase plus belt holster. Should arrive in a few days. I will post my impressions of the case.
Click to expand...
Click to collapse
Let us know if it fits the OEM multimedia cradle please (if you have one).. I'm dying for a good case that fits the cradle and doesn't hinder the keyboard like most of the hard shell ones i've tried (including the VZW and some cheapo ebay one)....
Lithoss said:
Let us know if it fits the OEM multimedia cradle please (if you have one).. I'm dying for a good case that fits the cradle and doesn't hinder the keyboard like most of the hard shell ones i've tried (including the VZW and some cheapo ebay one)....
Click to expand...
Click to collapse
It does not fit the cradle--between me and my 2 coworkers we have been thou 6 or so different cases and this is def the best one so far. No interference with the keyboard slide either, if the case was any thinner it would fall apart.
Nightrage said:
It does not fit the cradle--between me and my 2 coworkers we have been thou 6 or so different cases and this is def the best one so far. No interference with the keyboard slide either, if the case was any thinner it would fall apart.
Click to expand...
Click to collapse
Hmmm. That stinks it doesnt fit. Sounds like a very good case though.
I may have to take my dremel to the cradle
Assessment of the Seidio Innocase
I bought my Innocase via Seidio on-line store. The process was easy and shipped the same day via FedEx. I purchased the combo of the case and holster. However, Henry Ford must have been the design consultant for the D2 case. Unlike cases for the iPhone, you can have any color as long as it’s black. My wife reports that this is so BORING!
The case is made of a polycarbonate that is coated with a thin non-slip rubber-like material to improve gripping the phone. The case is only about 1/16 inch thick. The Innocase comes in 2 pieces that attach to the lower (sliding) and upper (display) portions of the phone with very small tabs that grip the edges. Though very small, these tabs secure the case well. Installation is a snap . I can report that the Innocase does not interfere with sliding mechanism in any way. Cutouts are provided for all phone items such as power connector, headphone jack, microphone, speaker, volume control, camera, power switch etc. The case does remove easily for access to the battery/ microSd.
Regarding operation of the slide out keyboard; I have found no difficulties. The D2 (without case) has less than 1/8 inch space above the top row of keys. The Innocase uses a minimum amount of this space. I found that even with my fat thumbs I had no difficulty (i.e. no missed or erroneous key presses) using the upper row of keys. In fact if I slipped my thumb up against the edge of the case I was positioned right over the top row keys.
Seidio has 2 holsters available; non-cased devices and Innocase devices. I have the Innocase holster. The holster is well built and provides a secure belt attachment. The belt clip swivels allowing vertical, 45-degree or horizontal carrying of the phone. To secure the phone you slip it in on the bottom and snap the clip on the top. The top clip is offset so it does not interfere with headset & power switch if you clip in with the screen facing in. The inward facing screen is recommended to reduce screen scratch risks. The holster is felt lined to protect the screen.
In summary I am very happy with the Innocase and belt holster. They are well designed and constructed. I recommend them for anyone with a Droid 2.
I do not own a cradle. I notice Seidio has a cradle for the Droid that works with Innocase. I would call them and see if the same cradle will work with the D2 & Innocase.
Thanks for the reviews. Sounds like the best case out there for sure.
Would you mind posting some pictures when you get a chance please? The pics on the seidio site are pretty weak. thanks!
Case and holster photos
Not much to look at
Case back shows cutouts for camera, speaker and USB power. Dull black exterior finish. Case front (not shown) is even less to look at, just a big cut for the screen.
Case tab picture shows a close up of the small tab that clicks onto the phone to secure the case. 4 places on both back and front halves. The shining finish evident in this photo is the interior of the case.
Holster picture shows the support for the bottom of the phone (on left of photo). The clip on the right secures the top of the phone and allows easy removal. On the bottom of the photo is the belt clip.
Hope these help.
I bought the Seidio surface case after finding the el-cheapo snap-on case I bought from an Amazon marketplace seller to be too bulky. The Seidio is no less bulky and was not even as well designed as the cheapo one (which afforded better access to the bottom row of soft buttons). I returned it to Seidio (out my $5 shipping, which was more than the entire cost of the cheapo one), and think it's unconscionable that they charge $30 for these two bits of plastic.
BTW, I have since tried one of the soft gel style cases for the A955 that they sell on ebay -- the kind with the "track slider" that keeps the two gell halves together (sort of like a ziplock plactic channel). This contraption was a completely useless mess, which fortunately only set me back $3 including shipping.
Ultimately, I think the D2 is a relatively thick device that really cannot accomodate a case without becoming way too thick. Thankfully, I've come to realize that it doesn't need a case - it already has Gorilla class and a rubberized back. Why bother with more? Mine's been dropped a few times with no signs of the drop at all except to the chrome paint around the edges, which flakes off easily.
Do you have a pic with it on the phone?

[Pics] Vehicle dock (slight mod) w/ Incipio Feather

I got the vehicle dock ($39 shipped from ABT Electronics) based on reviews here saying that it works with the Incipio Feather case. It does fit, but i wasn't 100% happy with they way the top clip was clipping (or not clipping) onto the case. The little plastic lip wont reach over the lip of the case and it clamps to the side of the case, with no contact with the rubber padding strip under there. If you have the dock / case combo, you should know what i am talking about. I decided to dremel out the little lip, now it clamps nicely on the rubber strip, and feels more secure. Here are some pictures of the fit.
Nice job there. Let me do it on mine.
nice this is what i was planning on doing when i got the dock. thanks for the post man.

[Review] PDair Horizontal Pouch for HTC One X

I got my PDair horizontal pouch for my HOX. Love it!
First of all, in my opinion, carrying phone in a pouch on your belt is the best place for it - it's safe, accessible, and there's no need for ugly cases.
Pics are below. Here are some points:
Perfect quality - no defects at all, these guys know how to manufacture quality stuff. I could easily lie that this case costs $80+ if I wanted to =)
100% Natural leather
Coushioned both outside and inside, real pleasant to touch
PERFECT fit for HOX - case was designed from scratch I guess, since it fits so damn well.
Sides have stretchy inserts for ease of access
Inside is made with wrinkled leather - soft and won't leave any residue on the phone.
All corners are covered (!), almost no chance of nicking a corner of your HOX over a table or something
Magnet clip, easily attaches and detaches.
Bottom cut-out, to make it easy to remove the phone quickly
Belt clip is VERY solid. It's full metal wrapped in leather, attached with metal stud. Attached very firmly.
Sown with white thread, looks very cool.
Inexpensive - $29 USD (no tax, free shipping) on their website. Took 2 weeks to deliver though.
Comes in a gift box, wrapped in tissue paper, like a freaking birthday gift. Yeah, seriously.
I highly recommend it. Ditch your plastic cases, just get this - your phone will be safe, and.. naked!
Pics:

SGS2i9100 white, mainly cases pics and etc gear

hey all. this is just simply pics of sgs2 and cases, covers etc.
all these covers are dirt-cheap! most are foudn thru ebay or amazon. Do not use excessive quoting in any form!
pic 1: standard sgs2 i9100 nordic white version.
pic 2: case-mate clear case cover, very comfy TPU-style case. the stupid triangular indentations on the back seems to helpescape the blemishes coming from simply cleamching the tpu gel onto the glossy finish of the phone. Not that that really means a thing! The clear rim is a nice feature, showing the chrome bezel off the SGS2. The firm grip comes with the tpu style, the bumper protects all the edges and <obviously> the back camera front surface as well. All covers however, do vocer the camera protruding area. Can recommend this cover!
pic 3: This, a glossy clean white case, made of tpu, a lovely cover, this covers never lost it's white for months. Until - I put it in a bag for a few months at max. the result was this cover was stained in several ways, pencils' helping included, yet surprising how this 'storage' made it look real bad, darkened, stained, after being dumped so to speak.
pic4+5: both of these covers have no cut-outs for side buttons. they are not hard to control though. I have certainly tried worse with a SGS3 cover, whereas the side buttons are askew, tilted backwards to the back of the phone. Using TPU cases on SGS2 is quite okay, albeit can be hard. Nowhere the same issue as on the SGS3. Quite acceptable as you will eventualy know where and when to punch those voume and power buttons.
pic 6+7: comparison of the white TPU and the clear TPU case-mate covers,
pic8-9: these show the same TPU cases, and these come with some screen protectors. cases and covers come with a variety of screen protectors. so do these here, and how to categorize those, will be another matter, cos there's so many different ones. and i dont use a single one
pic 10: this show how a textile mini towel can be saved up for later polishing of the screen. And yes, this wil surely overheat your phone if all you do is play TinTin all day. The SGS3 has a way more back panel to give, and fits 'standard' towels fine.
pic 1-2: No sweat!
Pic: 3-5: that white dirt cheap tpu gel case. Nothing bad to say about this case. Other than if you remove it, put it in a tight plastic bag first - otherwise it will not stay white!
this post is about screen protectors.. happens they all look alike, out of the dozens i have.. there is a few matt ones etc. .. so no screen protectors stupidities. swipe along this post then. if you want to believe: swipe it clean frictionless.
some really awesome bigass covers for scouts
This G931. Golla holster is really neat. As many other holsters I did not find it practical in everyday. Which is a great unfortune! this is a great rain repellant pouch. This particular holster fits a variety of phones WITH cases on, which includes SGS2, S-E arc-S, and those sizes. The pouch has an extra zipper pocket at the belt side, which is a WIN!. Several in my family found it useful indeed.
Golla
pic 1-5: GOLLA G1065. this golla pouch is really nice. a sorta denime color, with damaged areas, a badge, a wide belt fitting, double velcro in the front for the front face flap. The credit card deposit is a JOKE, it is not functional, not useful. In general this pouch is very comfy and absolutely a great looking pouch. Only it does not come handy, for at least, me.
This pouch works as well for S-E Arc-S - even with a cover. Are you needing over protection, then this pouch is there to fit that extra belt.
Golla G1065
this is a previous Golla case. G1065. very very the same as to the previous sandy colored golla pouch. this fits a SGS2 as well, including a case. It also fits the S-E- Arc-S. I would not recommend this case.
it has poor rear hooks for straps - certainly a joke with the brutal vinyl look of the rear of the pouch! the supplied neck chain is a joke, just as the attached flimsy hook is. This model has been discontinued i think, for obvious reasons! I owned it and it was a piece of ****!
EDIT: i will ad a wel photos of the HTC Desire Hd in this pouch. IT will happens when it DOES.
Pic 1-4. shows the typical 'vent' case covers. These <supposedly> relieve the heat from the... COOORE. These are comfy feeling cases, they don't do much, their weight amunt to zero, and can be found in any color.
Pic 5-7: The WHITE vent case sent here was for a korean phone. Notice the antenna area, and the enlarged button areas, and the obviously showing MISSING protectionate corner on the right-hand-side (seen from the front).

			
				
Hi, are those hard or rubber cases?
Looks very cool, thanks for the ideas

Anyone tried PDair pouch?

I Can not decide what case to choose, SENA one, but it's to thin and I hate the leather pattern, or go for good ol' PDair,
they have than one http://www.pdair.com/index.php/leat...nexus-gt-i9250-vertical-pouch-type-black.html with multiple stitching color to chose from.
I asked them what the inner side part is made of, and they told me
"Thanks for your enquiry. ALL our Genuine PDair Leather Case is made of Premium Korea Cowhide leather and inner part is pvc. The inner part is a little hard to support the case but won’t get scratchiness on the phone."
Now PVC can also mean vinyl, maybe they mean it's hard to bend but soft to touch? anyway post your answers, still think to go with PDair as the shipping is free, SENA wat's 30$ to ship to Israel and it's ridiculously pricier, LOL not that I'm one to complain, as I ordered some acessories from EXPANSYS UK (extended battery w/cover, and desktop multimedia dock for my GNEX, but they was cheaper back then in comparison to eBay):silly:
I have the same PDair version, but with a belt clip. It protects the screen just fine, in fact that is what I bought it for. It's not slim, but its the only thing I put in that pocket. For the times i'm not wearing business clothes (often) I clip the clip on the edge of my pocket, so the pouch sits inside my pocket, and the clip keeps it towards the top of the pocket. It also keeps the phones screen safe when i'm not keeping it in my pocket and throw it on a table or counter somewhere. It'll protect it from a lot of drops, but nowhere's near as effective of otterbox style cases.
BBruin66 said:
I have the same PDair version, but with a belt clip. It protects the screen just fine, in fact that is what I bought it for. It's not slim, but its the only thing I put in that pocket. For the times i'm not wearing business clothes (often) I clip the clip on the edge of my pocket, so the pouch sits inside my pocket, and the clip keeps it towards the top of the pocket. It also keeps the phones screen safe when i'm not keeping it in my pocket and throw it on a table or counter somewhere. It'll protect it from a lot of drops, but nowhere's near as effective of otterbox style cases.
Click to expand...
Click to collapse
Can you show me some photos? also do you maybe use extended battery? the thing is, that I want to make a pair, buy same type of case for both my Galaxy Nexus and my Nexus 7, I currently use SGP Crumena for the GNEX.
if you compare SENA, SGP and PDair, the last one is different, it not protect all the sides as the other.
on other hand the SENA vs PDair for N7 is that they do protect all sides

Categories

Resources