{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
efficientkernel.com
Our goal : battery life, performance and optimization
Introduction
Every smartphone's user has the same problem. The battery life and the reactivity of the system. Our kernel based on the great Ktoonsez offer today probably the best compromise between these two points. So... enjoy it ! :highfive:
:good: Not anymore with Efficient Kernel 2.1.1 and our efficientdemand governor :good:
With the efficientdemand governor, our kernel is optimized and preconfigured for the best balance of battery life and performance.
We suggest you to use the efficientdemand governor for the best experience ! If you use the KTweaker APP with this kernel, we suggest you to download our settings because some little improvements can be made with this APP.
You don't use KTWeaker APP ? Don't worry, our kernel is preconfigured to give you the best battery life and performance.
Features
Efficientdemand governor (balance of performance and battery life)
intelliactive governor from faux123
Available for AOSP/OMNI (4.4 - Linux 3.4.80) and Google Edition (4.4 - Linux 3.4.78)
BFQ 7.r1 scheduler as default
Optimized kernel
Ramdisk tweaks / optimizations
Compiled with our own custom GCC optimizations
Compiled with o3 optimization
Optimization of the kernel configuration (disable some useless debugs options and many more)
Based on KT Kernel (fully compatible with the awesome KTweaker APP)
Unsecure root ADB
CPU overclocking & underclocking (81mhz - 2322mhz)
CPU overvolting & undervolting
GPU overclocking & underclocking (128mhz - 627mhz)
GPU overvolting & undervolting
exFat support
BusyBox
SElinux disabled
Schedulers available : CFQ, BFQ, VR, SIO, NOOP, DEADLINE, ROW, FIFO and FIOPS
Governors available : efficientdemand, efficientsaver, efficientpower, intellidemand and intelliactive
Congestions controls available : ILLINOIS, YEAH, LP, SCALABLE, RENO, VEGAS, HTCP, HYBLA, HSTCP, BIC, WESTWOOD and CUBIC
Click to expand...
Click to collapse
Downloads
AOSP 4.4 - JFLTEXX
/!\ We suggest you to use the "efficientdemand" governor after the installation of the kernel; settings are preconfigured for optimized battery life and performance /!\
2.1.1
Efficient Kernel 2.1.1 (AOSP 4.4 Version) :
Official link : http://efficientkernel.com/dl/Efficient_Kernel-2.1.1-AOSP.zip
Mirror : https://mega.co.nz/#!kNJiwC5b!CnUYAB9vygra1elg8u9kdNnlG3LNyafXiWriXKfnnrM
Efficient Kernel 2.1.1S (AOSP 4.4 Version) * :
Official link : http://efficientkernel.com/dl/Efficient_Kernel-2.1.1S-AOSP.zip
Mirror : https://mega.co.nz/#!FRBFRByC!x6ruIt_g0JKVovF_2qE4zwO9sz-qb3w0VvhwzDFNbJY
Efficient Kernel 2.1.1 (OMNI AOSP 4.4 Version) :
Official link : http://efficientkernel.com/dl/Efficient_Kernel-2.1.1-OMNI.zip
Mirror : https://mega.co.nz/#!EJpH1ZiB!BB3pOHDtuBr1f0SCtN-rCb8lI2mbEfcE6wq5P2Qe_d4
Efficient Settings 2.1.1 (for KTweaker) ** :
Official link : http://efficientkernel.com/dl/Efficient_Settings-2.1.1
Mirror : https://mega.co.nz/#!JdBgGADK!Gk_RXfxH1QQ3EaaALHmeQkNSBcpgEJQpOmkHXAUxYuc
Google Edition 4.4 - JFLTEXX
/!\ We suggest you to use the "efficientdemand" governor after the installation of the kernel; settings are preconfigured for optimized battery life and performance /!\
2.1.1
Efficient Kernel 2.1.1 (GE 4.4 Version) :
Official link : http://efficientkernel.com/dl/Efficient_Kernel-2.1.1-GE.zip
Mirror : https://mega.co.nz/#!1Yg3SJAR!gHgY3r6OtUhLD5sGWWTHQmhbkfZd8l0yi1QhVO6YjN8
Efficient Settings 2.1.1 (for KTweaker) ** :
Official link : http://efficientkernel.com/dl/Efficient_Settings-2.1.1
Mirror : https://mega.co.nz/#!JdBgGADK!Gk_RXfxH1QQ3EaaALHmeQkNSBcpgEJQpOmkHXAUxYuc
Click to expand...
Click to collapse
* The 'S' version is the version for users who want pure performance and smoothness; awesome experience guaranted. Only available for the AOSP version. /!\ May impact your battery life /!\
** Our Settings for KTweaker. You can use these optimized settings (stock table voltage).
Our kernel is preconfigured with these settings, but some little improvements can be made if you use KTweaker. Place the file in "/sdcard/ktweaker/".
Changelogs
Code:
[COLOR=Red]
02.18.2014 :[/COLOR][INDENT][COLOR=Blue]2.1.1 AOSP & OMNI 4.4 :[/COLOR][INDENT][INDENT]- Optimization of the Kernel configuration
- Optimization of the battery life when the phone is on screen off
[/INDENT][/INDENT][COLOR=Blue]2.1.1 GE 4.4 :[/COLOR][INDENT][INDENT]- SElinux disabled
- Optimization of the Kernel configuration
- Fix USB bug when your phone is connected to your computer
- Fix stability issue
[/INDENT][/INDENT][/INDENT][COLOR=Red]02.18.2014 :[/COLOR][INDENT] [COLOR=Blue]2.1.0 AOSP 4.4 (Linux 3.4.80) :[/COLOR][INDENT][INDENT] - New GPU driver
- OMNI Version available !
- Builded from a clean sources
- Optimize memory allocation
- cpufreq_frequency_table_verifiy() optimization
- Hugetlbfs optimization
- Fixed memory leak with SElinux
- Fixed memory allocator deadlock
- Fixed infinite loop in RPC state machine
- Applay_slack() optimized
- Efficient Settings 2.1.0 (we suggest you to use this for the best balance between battery life / performance)
[/INDENT][/INDENT][COLOR=Blue]2.1.0 GE 4.4 (Linux 3.4.78 - Soon 3.4.80) :[/COLOR][INDENT][INDENT] - Efficient Kernel is now available for the Google Edition
- Builded from a clean sources
- Optimize memory allocation
- cpufreq_frequency_table_verifiy() optimization
- Hugetlbfs optimization
- Fixed memory leak with SElinux
- Fixed memory allocator deadlock
- Fixed infinite loop in RPC state machine
- Applay_slack() optimized
- Efficient Settings 2.1.0 (we suggest you to use this for the best balance between battery life / performance)
[/INDENT][/INDENT][/INDENT][COLOR=Red]02.17.2014 :[/COLOR][INDENT][INDENT]- Linux 3.4.80
- Added 'intelliactive' (Thanks faux123)
- Set 'intelliactive' governor as default
- Uptaded BFQ to 7.r1
- BFQ set as default
- Wireless driver uptaded
- Optimization of the kernel configuration
- Super light and optimized kernel, 1811mb available for the RAM !
- Battery life increased
- Reactivity REALLY increased
- Fixed SD card bug (from the 1.2.0beta)
- Removed ondemand-lphs -> added intellidemand
- Efficient Settings 2.0.0 for KTweaker
/!\ Efficient Kernel will be available for the 4.4.* Google Edition tommorrow in the night ! /!\
[/INDENT][/INDENT][COLOR=Red]02.15.2014 :[/COLOR][INDENT][INDENT]- SElinux disabled
- Kernel configuration optimized
- Fixed some little bugs
- WiFi tweaks (maybe better battery life when the screen is off)
- Increased general responsiveness
[/INDENT][/INDENT][COLOR=Red]02.13.2014 :[/COLOR][INDENT][INDENT]- Battery life improved
- Ramdisk updated
- Fixed some little bugs
- improved milisecond touch responsiveness in the 'S' version
- Removed interactive governor
- Efficient Settings 1.1.1
[/INDENT][/INDENT][COLOR=Red]02.12.2014 :[/COLOR][INDENT][INDENT]- Uptaded efficientdemand governor and ondemand-lphs governor (some rewrites)
- Added interactive governor
- Fix sound lags when playing music (when the screen is off)
- CGroups optimizations
- Little I/O optimizations
- Kernel optimizations
- 'S' version uptaded
- efficientsettings uptaded to 1.1
- Added KTweaker[/INDENT][/INDENT][COLOR=Red]02.09.2014 :[/COLOR][INDENT][INDENT]- Added Efficient Settings (for KTweaker).
[/INDENT][/INDENT][COLOR=Red]02.09.2014 :[/COLOR][INDENT][INDENT]- This is the first release. More optimizations and options in the future. Kernel continuously updated (GE and TW edition coming soon).[/INDENT][/INDENT]
Credits
All credits goes to ktoonsez for his amazing kernel. This guy is a god.
Click to expand...
Click to collapse
About
http://www.efficientkernel.com/
info[a]efficientkernel.com
Click to expand...
Click to collapse
Sources
https://github.com/teksinxda/efficientkernel
Sounds interessting. Thank you, will try it on my next battery cicle! :fingers-crossed:
New kernel? It's cool! I will surely test. It is compatible to CM11?
Yes compatible CM11 !!
teksin said:
Yes compatible CM11 !!
Click to expand...
Click to collapse
That's wonderful! Thanks! :good:
A new kernel is always welcome.
Many thx for this, gonna try it as soon as i got home. :thumbup:
Yay new kernel i will give it a try asap i want to ask how much impact in % has the S version of the kernel instead of the normal one
Update: i just flashed and all works perfect ,can you help me find ktweaker app plz ?
asbanoglou said:
Yay new kernel i will give it a try asap i want to ask how much impact in % has the S version of the kernel instead of the normal one
Update: i just flashed and all works perfect ,can you help me find ktweaker app plz ?
Click to expand...
Click to collapse
I just updated the thread, here the link for KTweaker !
https://mega.co.nz/#!oIpS0AhT!LuC9nEdI2FspGICRJtQebzqmdzdzOp-RUPhWqG6Pk94
Thanks for this kernel !
Testing since this morning, no problem so far : stable and fast, no battery isue.
Coming from KT & AluCard kernels, it's hard to see the different now, maybe in few days ...
looks interesting alternative to ktoonsez - will surely keep an eye on this - thanks for building for us
This ROM has excellent battery life! Only problem is, the music lag when screen is off. Please look into this!
kevin95 said:
This ROM has excellent battery life! Only problem is, the music lag when screen is off. Please look into this!
Click to expand...
Click to collapse
I guess you meant Kernel instead of Rom?
But yes, the battery life is really nice. I use it with the settings in the opening post, just slightly modified. You could try to raise screen off mhz to 810 mhz, that could help to avoid the lag.
Until now, the battery life isn't better or worse than I had with Ktoonsez Kernel, but its running smooth and without any lags. I'm happy. :angel:
Always like to try a new kernel to see what type of battery life I get. I am going to give it a try now, thanks.
Was curious and tried s version with cm11. Was smooth but alarm does not wake up phone and I also woke up too late. Timer seems not to wake up phone either.
I had issues with playing music. Was interrupting the music often
störte said:
I had issues with playing music. Was interrupting the music often
Click to expand...
Click to collapse
Set "disable_hotplugging_media" to 1. Issue solved.
Tried it but it is still the same. I changed it with Trickster Mod
störte said:
Tried it but it is still the same. I changed it with Trickster Mod
Click to expand...
Click to collapse
I changed the default "efficient" profile to my needs using the KTweaker app.
Look at youre "screen off MHz" settings. Mine is set to 486, think default is 128, that's too low for my needs. Furthermore are you UV? If so don't go too low.
Lucius1972 said:
I changed the default "efficient" profile to my needs using the KTweaker app.
Look at youre "screen off MHz" settings. Mine is set to 486, think default is 128, that's too low for my needs. Furthermore are you UV? If so don't go too low.
Click to expand...
Click to collapse
Ok . I didnt change anything on it except that i change to efficentdemand as recommended . Dont have a big idea with the Settings. Will play around a bit.
störte said:
Ok . I didnt change anything on it except that i change to efficentdemand as recommended . Dont have a big idea with the Settings. Will play around a bit.
Click to expand...
Click to collapse
I think you only need to change screen off MHz and disable_hotplugging_media as said and leave the voltages as they are, they are stock.
Use KTweaker to load the provided efficient profile in OP and make the changes.
See how it goes..
Related
[KERNEL][3.0.Y][LINARO][OC/UV] Skull Kernel - v1.0 [18/06/2013 | FEATURES & TWEAKS]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
for JB 4.2.2
Since arco had switching to kernel 3.0.Y on latest CM10.1 alpha. I decide to open a new thread for my custom 3.0.Y kernel.
Hope not confuse all
Some warning to all users before flashing away!
Please do not install this kernel on any Android version lower than 4.2.Y
By flashing this kernel, you are accepting any outcome that might happen after using this kernel
I'm not responsible for any damage and your warrantly will be void!
(damage should seldom happen as I always getting this kernel tested and ONLY release it when it come stable )
Whats inside the kernel
Kernel version 3.0.82
Build with Linaro Toolchain GCC 4.7.4 2013.06 from Christopher83
O2 optimization
Default CPU governor: lulzactive
Default I/O Scheduling: ROW
A lot governors for user to choose:
interactive, conservative, lulzactive, ondemand, powersave, smartassV2, performance
More IO scheduler present in kernel also:
row, bfq, cfq, deadline, noop, sio, vr
Default max CPU frequency: 1401 MHz, Default min CPU frequence: 245 MHz
Overclock UPTO 1804 MHz & slightly undervolt
Please be aware overclock could damage your phone!
IF YOU DON'T NEED IT, CHANGE BACK TO DEFAULT MAX FREQUENCY AND LEAVE IT THERE
Voltage Control (VDD Sysfs Interface)
Optimized asynchronous I/O latency on solid state disks
Optimized ARM RWSEM (read/write semaphore) algorithm
Optimized kernel memory process to improve performance
Optimized auto-scheduler
Tuning LMK minfree value
Battery Life eXtender (BLX)
Dynamic dirty page writebacks (check here for more details)
Dynamic File Sync (check here for more details)
Frandom (fast random generator) with hard link urandom and random to frandom
Dynamic readahead size based on device disk size
Included tweaks on kernel/ramdisk to help with system responsiveness
Sync with upstream arco changes, as always
MY GITHUB SOURCE
KERNEL
RAMDISK
New build changelog
v1.0
[DOWNLOAD]
Included features/tweaks from my custom 3.4.Y kernel. But I also added some extra to it.
Below listed some differences:
- Tune lowmemorykiller minfree value.
- Added Dynamic dirty page writebacks.
- Added Battery Life eXtender (BLX).
- Enable Dynamic File Sync.
- Included RWSEM updates and optimizations from 3.10 kernel
- Fixed overclock 1804 MHz.
Instruction
Boot to recovery.
Mount system and data (optional as I already set these when flashing the kernel)
Flash the kernel now.
Wipe cache & dalvik cache. Fix permission also. (RECOMMEND)
Reboot to OS.
Done, enjoy.
Note: If you encounter deep sleep or force close problem after flashing my kernel, please fix permission through CWM recovery. This may help.
Credit
Our master arco68 (many thanks for his great source)
Linaro team
Kernel mod's that hold similar device like hadidjapri, Christopher83, erik and CastagnalT
Dorimanx for help and guide always
Pikachu01 for his awesome ThunderBolt! scripts
Some github guys that I follow
anyone looking at my thread!
Google for making this possible
YOU ARE WELCOME TO GIVE ANY FEEDBACK AND REMEMBER TO CLICK [THANKS] IF YOU FIND THIS KERNEL USEFUL. THANKS
Click to expand...
Click to collapse
SOME USEFUL COMMAND
You can always refer to this page before setting the value. (thanks Christopher83 for detailed explanation)
http://forum.xda-developers.com/showthread.php?p=42354290#post42354290
Voltage Control (VDD Sysfs Interface)
echo "1401600 1250" > /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels
Battery life extender (BLX)
echo 95 > /sys/class/misc/batterylifeextender/charging_limit (Default Setting)
Dynamic dirty page writebacks
echo "3000" > /proc/sys/vm/dirty_writeback_active_centisecs (Default Setting)
echo "1000" > /proc/sys/vm/dirty_writeback_suspend_centisecs (Default Setting)
Thank you..
downloading..:good:
feels nice!
will test moar
Gonna try this with liquidsmooth rom
Sent from my GT-I8150 using Tapatalk 4 Beta
selfishloner said:
Gonna try this with liquidsmooth rom
Sent from my GT-I8150 using Tapatalk 4 Beta
Click to expand...
Click to collapse
with this kernel and cusrom liquidsmooth = GREAT :good:
Thanks alot !:good:
Just flashed it! My rom is Ehndroix III 4.2.2 I'll give some feedback if there sould be any problem.
I do not game, but i use my phone in various ways (everyday average use), i'll report on performance also!
Nice work mate! Keep it up! Great fan of your kernels and work.:good:
Hi there!
As i promised i'll report on performance i do now:
What's good:
1. Battery drain was only 1% during the night not in airplane mode. Awesome!
Question: increased audio loudness is missing here? I have the feeling that my phone is not as loud as with the other kernel of yours (3.4...).
Problem:
1. it just occured today, i was putting the phone in deep sleep by power button and next in an hour or so it will not answer to home button.
By (long) pressing power button the device woke up (i thought it turned of itself, but there was no pin unlock request, it just started as if it was returning from deep sleep).
Edit:
As i had Battery Doctor installed, and since then this problem occured for the first time, so i think it is related to the app not kernel.
Keff91 said:
for JB 4.2.2
Since arco had switching to kernel 3.0.Y on latest CM10.1 alpha. I decide to open a new thread for my custom 3.0.Y kernel.
Hope not confuse all
Some warning to all users before flashing away!
Please do not install this kernel on any Android version lower than 4.2.Y
By flashing this kernel, you are accepting any outcome that might happen after using this kernel
I'm not responsible for any damage and your warrantly will be void!
(damage should seldom happen as I always getting this kernel tested and ONLY release it when it come stable )
Whats inside the kernel
Kernel version 3.0.82
Build with Linaro Toolchain GCC 4.7.4 2013.06 from Christopher83
O2 optimization
Default CPU governor: lulzactive
Default I/O Scheduling: ROW
A lot governors for user to choose:
interactive, conservative, lulzactive, ondemand, powersave, smartassV2, performance
More IO scheduler present in kernel also:
row, bfq, cfq, deadline, noop, sio, vr
Default max CPU frequency: 1401 MHz, Default min CPU frequence: 245 MHz
Overclock UPTO 1804 MHz & slightly undervolt
Please be aware overclock could damage your phone!
IF YOU DON'T NEED IT, CHANGE BACK TO DEFAULT MAX FREQUENCY AND LEAVE IT THERE
Voltage Control (VDD Sysfs Interface)
Optimized asynchronous I/O latency on solid state disks
Optimized ARM RWSEM (read/write semaphore) algorithm
Optimized kernel memory process to improve performance
Optimized auto-scheduler
Tuning LMK minfree value
Battery Life eXtender (BLX)
Dynamic dirty page writebacks (check here for more details)
Dynamic File Sync (check here for more details)
Frandom (fast random generator) with hard link urandom and random to frandom
Dynamic readahead size based on device disk size
Included tweaks on kernel/ramdisk to help with system responsiveness
Sync with upstream arco changes, as always
MY GITHUB SOURCE
KERNEL
RAMDISK
New build changelog
v1.0
[DOWNLOAD]
Included features/tweaks from my custom 3.4.Y kernel. But I also added some extra to it.
Below listed some differences:
- Tune lowmemorykiller minfree value.
- Added Dynamic dirty page writebacks.
- Added Battery Life eXtender (BLX).
- Enable Dynamic File Sync.
- Included RWSEM updates and optimizations from 3.10 kernel
- Fixed overclock 1804 MHz.
Instruction
Boot to recovery.
Mount system and data (optional as I already set these when flashing the kernel)
Flash the kernel now.
Wipe cache & dalvik cache. Fix permission also. (RECOMMEND)
Reboot to OS.
Done, enjoy.
Note: If you encounter deep sleep or force close problem after flashing my kernel, please fix permission through CWM recovery. This may help.
Credit
Our master arco68 (many thanks for his great source)
Linaro team
Kernel mod's that hold similar device like hadidjapri, Christopher83, erik and CastagnalT
Dorimanx for help and guide always
Pikachu01 for his awesome ThunderBolt! scripts
Some github guys that I follow
anyone looking at my thread!
Google for making this possible
Click to expand...
Click to collapse
sir . no update for this amazing kernel?
Sent from my GT-I8150 using Tapatalk 4 Beta
hanafi200 said:
sir . no update for this amazing kernel?
Sent from my GT-I8150 using Tapatalk 4 Beta
Click to expand...
Click to collapse
It is more than month since he pushed last update on his github .. I hope he is fine
Sent from my GT-I8150 using xda premium
Madridii said:
It is more than month since he pushed last update on his github .. I hope he is fine
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
i think he busy with his university life, maybe in exam this time because i just finish my paper.. there surely will be an update when he free hope he doing fine.
hurtsky said:
i think he busy with his university life, maybe in exam this time because i just finish my paper.. there surely will be an update when he free hope he doing fine.
Click to expand...
Click to collapse
yeah. i hope so.
Sent from my GT-I8150 using Tapatalk 4 Beta
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- NOTICE: DEVELOPEMENT FOR THIS KERNEL HAS BEEN DISCONTINUED -
Compatible with OmniRom Marshmllow builds
and all Omni based roms (Omni Official builds, Omni Herna's builds, FusionJack's SlimSaber, SAOSP, etc.)
Hotplug Drivers
Omni's stock CPU-Quiet Hotplugging Framework
Blu_Plug (disabled by default) thanks to engstk
Alucard Hotplug (disabled by default) thanks to Alucard_24
MSM Zen Decision (disabled by default) - thanks to bbedward
Bricked Hotplug (disabled by default) - thanks to neobuddy89
Mpdecision (disabled by default)
CPU Governors
Smartmax / Ondemand / Interactive / Conservative / Powersave / Performance (Omni's stock)
Zzmoove (added) - thanks to ZaneZam - REFER TO 3RD. POST FOR INDICATIONS ON HOW TO SET PROFILES
Smartmax_EPS (added)
Alucard (added)
Blu_Active (added)
Custom Features & Optimizations
Built with UBER 5.3 optimized toolchain & optimization Flags
Upgraded linux version 3.4.110
Adreno Idler - tuned for Omni
State_Notifier - by NeoBuddy89
Charge_Level interface - thanks to Lord_Boeffla - FIND INDICATIONS TO HANDLE THIS IN THE THIRD POST
KCAL v2 Control - credits to Savoca
Voltage Control Interface - credits to Franciscofranco
Power Efficient workqueues (enabled by default)
Quickwakeup driver
Franco's thermal driver
Franco's Sound Controls
Faux/Yank's powersuspend implementation
Reduced wakelocks and power saving optimizations
Vibrator Intensity interface
Fsync toggle - thanks to franciscofranco
Wlan wakelock toggles - experimental
CRC toggle - disabled by default
Sync on Suspend toggle interface (disabled by default)
Dynamic management of dirty page writebacks
ARM Topology optimizations
Faux's Simple GPU Algorythm
Increased randomness
CDROM/USB emulation toggles (DriveDroid compatibility)
Many, many other optimizations (refer to the source code for more details)
- Flashable using Anykernel2 - thanks to osm0sis
DISCLAIMER: flash at your own risk; this is intented to improve your android experience, but I'm not responsible for anything unexpected it could happen - and sh** does happen sometimes. Yet, knowing what you are doing usually prevents it. So... be warned.
XDA:DevDB Information
Donkey ONE Kernel, Kernel for the ONEPLUS ONE
Contributors
fermasia
Source Code: https://github.com/fermasia/android_kernel_oppo_msm8974
Special thanks for their source to: OmniRom team ; ak ; savoca ; herna; RenderBroken ; franciscofranco ; LordBoeffla ; derromtester ; neobuddy89 ; and many others.
Created 2015-02-16
Last Updated 2015-12-27
DOWNLOADS - If you find my work useful, please consider buying me a beer :good:
- NOTICE: DEVELOPEMENT FOR THIS KERNEL HAS BEEN DISCONTINUED -
Current version: Version 15 - 27-Dic-2015
Older versions: here
Extras:
UKM-Donkey_Edition_v2
Screen Control App by savoca
Flashing Instructions:
- Flash through recovery (TWRP recommended)
- Flash UKM-Donkey Edition (optional)
- Clean cache (recommended)
- Reboot
- Install Synapse (optional)
- Enjoy (mandatory)
CHANGELOGS:
REFER TO MY KERNEL SOURCE FOR DETAILS ON EVERY COMMIT INCLUDED.
ON HOW TO HANDLE CHARGE_LEVES INTERFACE (proceed with caution, if you don't know what you are doing, just don't do it... I won't support any mess ups with this option!)
- You'll find the sysfs interface for this in this path: /sys/kernel/charge_levels
- The charge_level_ac file contains the value for the wall charger rate in mA; if the file contains a 0 value, it will charge at the standard rate, anything else will be user handled; values should go not more than to the 2100 limit.
- The charge_level_usb file contains the value for the usb charge rate in mA; if the file contains a 0 value, it will charge at the standard rate, anything else will be user handled; values should go not more than to the 500 limit.
- Te charge_info file provides info about the rate in mA and voltage when the phone is charging.
ON HOW TO APPLY ZZMOOVE PROFILES: For now, use Kernel Adiutor, Synapse or any other kernel tweaker to select Zzmoove as the Cpu Governor, and under Governor Optimizers (or in the Sysf folder) and choose the profile_number of your choice:
1 - for Default (set governor defaults)
2 - for Yank Battery -> old untouched setting (a very good battery/performance balanced setting DEV-NOTE: highly recommended!)
3 - for Yank Battery Extreme -> old untouched setting (like yank battery but focus on battery saving)
4 - for ZaneZam Battery -> old untouched setting (a more 'harsh' setting strictly focused on battery saving DEV-NOTE: might give some lags!)
5 - for ZaneZam Battery Plus -> NEW! reworked 'faster' battery setting (DEV-NOTE: recommended too! )
6 - for ZaneZam Optimized -> old untouched setting (balanced setting with no focus in any direction DEV-NOTE: relict from back in the days, even though some people still like it!)
7 - for ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 - for ZaneZam Performance -> old untouched setting (all you can get from zzmoove in terms of performance but still has the fast down scaling/hotplugging behaving)
9 - for ZaneZam InZane -> NEW! based on performance with new auto fast scaling active. a new experience!
10 - for ZaneZam Gaming -> NEW! based on performance with new scaling block enabled to avoid cpu overheating during gameplay
11 - for ZaneZam Relax -> NEW! based on moderate (except hotplug settings) with relaxed sleep settings (to react audio/bluetooth/wakeup issues)
Thanks for this man, Just downloaded your unofficial omni build and now this.
Wow! Finally a Custom Kernel for Omni! Much Appreciated
Sent from My OnePlus Using XDA Premium 4
@fermasia well quite lucky you guys. You just steal our one of best devs. Just kidding. Well nice to see you you here brother @fermasia. Well I hope you will develop with same Passion for which you are known in community. Well flash flashing guys.
Sent from my XT1033 using XDA Free mobile app
@fermasia, Just installed the kernel on your latest build but its stuck at bootlogo for long time. Did clean cache.
anishz said:
@fermasia, Just installed the kernel on your latest build but its stuck at bootlogo for long time. Did clean cache.
Click to expand...
Click to collapse
I'm looking into it, tested it fine onto a dirty flash of the latest Omni build, but for some reason when I clean flashed the new Omni version, it doesn't work. As soon as I get it sorted out I'll re-upload the link.
fermasia said:
I'm looking into it, tested it fine onto a dirty flash of the latest Omni build, but for some reason when I clean flashed the new Omni version, it doesn't work. As soon as I get it sorted out I'll re-upload the link.
Click to expand...
Click to collapse
Take your time man, we'll wait.
where is the rom link please.
malavan said:
where is the rom link please.
Click to expand...
Click to collapse
Dude you are a senior member, Rom link is in Android Development thread HERE.
And if you meant Kernel link then fermasia is testing it as it wasn't booting for us.
anishz said:
Dude you are a senior member, Rom link is in Android Development thread HERE.
And if you meant Kernel link then fermasia is testing it as it wasn't booting for us.
Click to expand...
Click to collapse
Sorry i was on the old Omni theread maybe I'm getting blind lol thanks
malavan said:
Sorry i was on the old Omni theread maybe I'm getting blind lol thanks
Click to expand...
Click to collapse
Happens to all of us, also thread was just launched today.
@fermasia, when you are free and if taking requests, please take a look at This.
anishz said:
Take your time man, we'll wait.
Click to expand...
Click to collapse
Done, the link is back up. It was a dumb derp in the flashing script... lol.
malavan said:
where is the rom link please.
Click to expand...
Click to collapse
If you meant the kernel's link, it's back again, had to put it down for an hour to solve a small derp.
fermasia said:
Done, the link is back up. It was a dumb derp in the flashing script... lol.
Click to expand...
Click to collapse
Done, flashed and working well. Thanks!
anishz said:
Happens to all of us, also thread was just launched today.
@fermasia, when you are free and if taking requests, please take a look at This.
Click to expand...
Click to collapse
Yup, kcal, fastcharge, voltage control, etc are queueing in the to-do list
Dope! Are the default settings your recommended settings?
OmegaBlaze said:
Dope! Are the default settings your recommended settings?
Click to expand...
Click to collapse
Not really, I'm still testing -and will probably keep tuning- hotplugs and governors. I'm even considering adding Bricked Hotplug too.
The beauty -in my opinion- about Omni is how solid it works. With other roms I've allways stepped into A or B annoying bugs. Not talking down about anybody's work, but even when Omni takes more time to add features, things work better, and I like that. Plus these guys are making a true open source project, not meaning to bloat our experience with the goal of making money -like CM theme manager- but again, that's just my point of view.
Back to the kernel, there's still work to be done. For now, at least I'm getting a much more acceptable battery drain and, in my opinion, a very good idle/deepsleep drain. Yet I'm not too fond about excesive options, and 3 hotplug drivers qualify as way too much to choose from. I love mako_hotplug because of it's simple and clean approach, that's why it's defaulted. But I might find some other works better in lollipop. So please toy with settings and try to find ur better config. And... report back if you can, I could use the feedback.
Thanks for downloading and trying out.
Looks like a very interesting kernel for the omnirom!
What does the 'quick wake up' feature exactly do? Does it remove the slight delay between pressing the power button and the screen turning on?
Could not really find something describing it on google.
Omni is using cpuquiet hotplug, right ?
Is it working good ?
Kushan Kernel [I9505] [Touchwiz Lollipop]
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, I will laugh at you.
*
*/
This is my first kernel and I will be adding more and more features gradually.
My main goal is to provide a stable and awsome kernel with great performance and battery life to users
Kernel Features:
- Based on Samsung Open Source Kernel Sources - XXUHOH2 Lollipop
- Linux 3.4.109
- Compiled Latest Linaro Toolchain - 4.9.3-03.2015
- Stweaks kernel support
- OH2 initrams
- Optimized Stweaks for better perfomance and battery life
- Faux Sound Support
- Compiled with neon float
- Voltage Control
- tripndroid, row, sio, sioplus, bfq, vr, zen, FIOPS and FIFO I/O scheduler
- ArterActive, Barry Allen, Impulse, Optimax, Preservative, intellidemand, asswax, lionheart, smartmax, darkness, abyssplugv2, intelliactive, ondemandplus, nightmare, wheatley, alucard, conservativex, pegasusq, Intellimm, SmartassH3 and Yankactive CPU governors
- Disabled Android Logger
- Sweep2sleep
- Vibration Intensity controll
- Performance and Simple GPU governors
- Undervolt support
- TCP congestion controll
- zRam (Can be disabled by stweaks)
- Network Speed Tweak
- Dual boot support
- Intelli_thermal controll
- Fast Charge
- LED controll
- GAMMA controll
- Removed TIMA crap
- Fixed Selinux memory leak upon loading policy
- Added Init.d support
- Added BusyBox support and included
- Set Selinux to Permissive
- Automatically removes all the knox crap
- Automatically removes all the old kernel settings
- Automatically does loki patch
More features will be gradually added
For best results just use the default settings without changing anything else but only change the following mentioned below for best results...
Disable zRam (Enable it only if you are a hardcore gamer)
Set GPU Governer to Simple
Leave everything else to default also the profile to default
For awesome battery life follow this guide by @lawyer_06 here
You can always experiment with different features turned off or on and report back if it improves performance
Download Links:
Current Version:
v.3.0 :
AndroidFileHost Link
Older Version:
v.1.0 - AndroidFileHost Link
v.2.0 :
AndroidFileHost Link
XDA Download Host Link
Github Kernel Source Code: - Source Code Github Link
Special Thanks to :
@Hybridmax
@Slim80
@ausdim
If I forget you, then PM me
Credits:
Samsung
@Christopher83 - Linaro Toolchain
@dorimanx
@wanam
@fanny
@alucard_24
@googy_anas
@faux123
@Yank555-lu
@ktoonsez
@Lord Boeffla
@AndroidGX
@Chainfire
@Kryten2k35
PM me if I forget you
XDA:DevDB Information
Kushan Kernel for I9505, Kernel for the Samsung Galaxy S 4
Contributors
Kushan02
Source Code: https://github.com/kushan02/kushan_kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v.3.0
Stable Release Date: 2015-10-16
Created 2015-05-08
Last Updated 2015-10-19
Reserved
Changelog:
v.3.0
Code:
- Remade with I9505XXUHOF2 sources
- Updated with Linux 3.4.109
- Used OH2 initrams
- Updated & Moded STweaks UI Thanks @slim80 for the UI
- Fixed screen mirroring issue
- Added tripndroid, row, sio, sioplus, bfq, vr, zen, FIOPS and FIFO I/O scheduler
- Added ArterActive, Barry Allen, Impulse, Optimax, Preservative, intellidemand, asswax, lionheart, smartmax, darkness, abyssplugv2, intelliactive, ondemandplus, nightmare, wheatley, alucard, conservativex, pegasusq, Intellimm, SmartassH3 and Yankactive CPU governors
- Added Performance and Simple GPU governors
- CPU and GPU undervolt support
- Add dual boot support
- Added Fast Charge
- Added LED controll
- Added GAMMA controll
- Added Vibration Intensity controll
- Added TCP congestion controll
- Added Intelli_thermal controll
- Many more small under the hood tweaks for best performance and battery life
v.2.0
Code:
Added Faux Sound Support
Compiled with neon float
Added Voltage Control
Added some I/O schedulers
Added many CPU Governers like Lionheart, interactive and many more
Disabled Android Logger
Enabled zRam
Added a Network Speed Tweak
Removed TIMA crap
Fixed Selinux memory leak upon loading policy
v.1.0:
Code:
Initial Release
Reserved
BENCHMARK SCORES, SCREEN ON TIME AND DEVICE UP TIME AFTER CHARGE BY USERS
v.2.0:
xperia_88 said:
After some hours (12 h) of hard using of my phone with Kushan Kernel v.2.0 I get Geat Battery Life Results. I be left now 89% - 3d 3h battery life ! My other phone with other Kernel give me 72% - 1d 20h battery life...
I left everything on STweaks as default and changed only what Kushan recommend:
"Disable zRam (Enable it only if you are a hardcore gamer)
Disable Android Logger
Disable Fast Charge (As support is not yet added)"
Great work !!! :good::good::good:
Click to expand...
Click to collapse
javitolopez69 said:
View attachment 3312071View attachment 3312072View attachment 3312073ehhh! !!! No coment
Click to expand...
Click to collapse
heblu said:
Flashed yesterday V2. I must say I'm impressed!
This kernel is working great on my phone
Good battery life, no lag, everything feel snappy
Congrats and thank you brother!
Click to expand...
Click to collapse
v.1.0
xperia_88 said:
After more than 17 hours of using Kushan Kernel TWLP v.1.0 these are my AnTuTu Benchmark performance and the battery life results. Great for only v.1.0 ! :good:
Click to expand...
Click to collapse
xperia_88 said:
The Screen Time 4h 45m (from 17h total used).
Click to expand...
Click to collapse
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice start!
thanks and thumbsup for your work.
is there any possibility that you add in the future loop device support?
thx
Thank you and congrats!!
Kushan, do you think this can fix wifi not working when using your TW Lollipop on a T-mobile S4? I'm not willing to upgrade baseband and modem without knowing if I'll be able to revert back or even work properly.
I tried to find ausdim v2 kernel but I failed to find a download link.
Thank you for your awesome work!
fartlec said:
thanks and thumbsup for your work.
is there any possibility that you add in the future loop device support?
thx
Click to expand...
Click to collapse
yes as I told I will be adding more features slowly and gradually so maybe yes in future releases
extrem0 said:
Kushan, do you think this can fix wifi not working when using your TW Lollipop on a T-mobile S4? I'm not willing to upgrade baseband and modem without knowing if I'll be able to revert back or even work properly.
I tried to find ausdim v2 kernel but I failed to find a download link.
Thank you for your awesome work!
Click to expand...
Click to collapse
yes it will fix the wifi
Optimized Stweaks for better perfomance and battery life
"Optimized Stweaks for better perfomance and battery life"
Kushan, do you mean this optimized comes as default of the added Stweaks ?
xperia_88 said:
"Optimized Stweaks for better perfomance and battery life"
Kushan, do you mean this optimized comes as default of the added Stweaks ?
Click to expand...
Click to collapse
yes default, by optimized I mean have configured kernel to give best performance when any of the tweak is activated
How is the battery life.
I personally like this options.
Great job men
javitolopez69 said:
How is the battery life.
I personally like this options.
Great job men
Click to expand...
Click to collapse
personally speaking battery life is good... till now... will probably need some more days of usage to give a conclusion
Good job mate. Keep it coming
Good work @Kushan02..
I believe you will make it better time by time with your skills..
Good luck..
one day we will have to get 10 hours of screen???
STweaks- MASTER CORE
After I flash this kernel I see "MASTER CORE" header in the STweaks. Do I need to change anythings here or to click "LOAD ALL" ?
xperia_88 said:
After I flash this kernel I see "MASTER CORE" header in the STweaks. Do I need to change anythings here or to click "LOAD ALL" ?
Click to expand...
Click to collapse
its loaded by deafult... still if you want you can press it
Nice News .
I will help you out Mate
Hybridmax said:
Nice News .
I will help you out Mate
Click to expand...
Click to collapse
Thanks bro
Good job Kushan, i will try your kernel
An advice, change the title of your thread "[KERNEL] Kushan Kernel [I9505] [TW Lollipop]" to "[KERNEL] Kushan Kernel v1.0 [I9505] [TW Lollipop], and same thing for your TW Lollipop ROM
Hi guys, I have proposed to make a kernel for the falcon and here they have it <3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot:
Click to expand...
Click to collapse
Old builds history:
http://pastebin.com/RqyTpYna
New Build Evolution Kernel-R10 , For Nougat and Marshmallow Roms
- Linux code updated to lastest LineageOS source: 3.4.113 :good:
- Based on a new clean source for greater stability
- Compiled with latest simple GCC 4.8 (great for this) :good:
- Some optimizations for kernel compression (lzma)
- Many optimization for memory usage and reduce Lag
- Added Customs TCP
- New AsCaRex custom TCP by TeamMex Added (nice)
- Lzma compression (very nice)
- No more useless mods
- Added and improved SIO, SIOPLUS, VR, ZEN v2 I/O schedulers and default BFQ, etc...
- Row I/O scheduler is recommended by me :good:
- Added toggles for wakelocks
- MSM Hotplug stable rules (Nice deep sleep Now)
- Powersuspend updated (Use in Hybrid mode)
- Kcal v2 support
-Dt2w added but does not work for the moment (disable)
- Selinux enabled in permissive mode by default
- WQ Power Efficient tweaks
- State notifier driver added
- Lcd notify driver Removed (NO MORE START SCREEN FREEZE)
- New Governors added: zzmoove, Xperience by @TeamMex , Bioshock, Lionheart and ElementalX (testing)
- Interactive and Ondemand governor updated for better efficiency
- Added Sound Control v3.6
- Fast Charge enable by default
- Fix memory leaks for better perfomance
- Many more optimizations for performance and battery saving (check source)
- New TCP congestion driver called AsCaRex by @TeamMex Added
AsCaRex employs end-to-end bandwidth measurements to set cwnd and ssthresh after packet loss. The probing phase is as the original Reno, have a modified control mechanism for use with large congestion windows. A table indicates how much to increase the congestion window when an ACK is received.
Click to expand...
Click to collapse
[/SIZE]
Important: Use the kernel adiutor application to tune this kernel
How to install:
-Paste the zip on internal memory
-Install zip with twrp recovery
-If you use SUPERSU or Magisk, after installing my kernel install again
-Reboot and Enjoy :good:
If you like my work, contribute for more updates please:
Download:
https://www.androidfilehost.com/?fid=889764386195904758
**No mirrors please**
Suggestions for balance perfomance/battery
-Use interactive gov with hispeedfreq on 787mhz and min freq 300mhz....
-For more conservative use Bioshock or Xperience governor and min freq 300mhz
-For most battery life use zzmoove gov and select profile #2 (Some lags)
-Cpu hotplug as default msm_hotplug
-Sheduler ROW
-In misc features select suspension mode on hybrid (default) and TCP select AsCaRex or westwood
Consider please
Hi friends, I appreciate your support testing my work, If you like my kernel, contribute please, actually I'm studying at the university, I do this in my free time, I would appreciate a little help if it is at your disposal, thank you very much!
Evolution Turbo Kernel Oreo Updated
-Kernel build with QUVNTNN 6.4 2018.01 Custom ToolChain
-Improved Cortex-A7 configs
-Improved XZ kernel compression
-def_config regenerate
-Updated cpufreq and gpu drivers configs for better performance
-MSM_HOTPLUG
-Spinlocks changes
-Significant lag in oreo reduced
-Simple Adreno GPU algorithm added
-New governors distribution: Default govs, XPerience, SmartMax and BioShock govs
-All TCP cong is activated (AsCaRex default)
-Many more changes for you..
Source: https://github.com/willizambrano/android_kernel_motorola_msm8226
Download: https://androidfilehost.com/?fid=746163614322268638
How to install:
-Paste the zip on internal memory
Backup of you stock boot.img
-Install zip with twrp recovery
-Reboot and Enjoy :good:
Thanks to:
-CodeAurora
-CyanogenMod team
[email protected] for Sound Control
[email protected]
[email protected] for Kcal Screen Control
[email protected] for cherry-picks
[email protected] for cherry-picks
[email protected] Arriaga
- @TeamMex
Click to expand...
Click to collapse
XDA DevDB Information
Evolution_Kernel, Kernel for the Moto G
Contributors:
@willizambrano01
Click to expand...
Click to collapse
Sources:
https://github.com/willizambrano/android_kernel_motorola_msm8226
Click to expand...
Click to collapse
XDA:DevDB Information
Evolution Kernel unified for Oreo-MM/Nougat roms, Kernel for the Moto G 2014
Contributors
willizambrano01, willizambrano01
Source Code: https://github.com/willizambrano/android_kernel_motorola_msm8226
Kernel Special Features:
Version Information
Status: Beta
Stable Release Date: 2018-06-03
Current Beta Version: TURBO
Created 2016-12-07
Last Updated 2018-10-23
Downloaded and testing. Thank you
Good work,but its just for CM ROMs? :/
DeluxeMark said:
Good work,but its just for CM ROMs? :/
Click to expand...
Click to collapse
7.1 roms baseds on cm14.1 or aosp 7.1
willizambrano01 said:
7.1 roms baseds on cm14.1 or aosp 7.1
Click to expand...
Click to collapse
Nice! So i'll test it
Edit: When i've flashed the kernel,my superSU is gone,its normal?
And when i reflash the superSU,my sim doesnt work :/
Keep up the good work! smooth butter with RR Rom!
DeluxeMark said:
Nice! So i'll test it
Edit: When i've flashed the kernel,my superSU is gone,its normal?
And when i reflash the superSU,my sim doesnt work :/
Click to expand...
Click to collapse
It have in build root permission.. Goto developer options and activate root access for apps&adb..
.
No need to flash supersu
captian_jb said:
It have in build root permission.. Goto developer options and activate root access for apps&adb..
.
No need to flash supersu
Click to expand...
Click to collapse
Actually im using tesla N rom and it isnt pre rooted
Is this for titan?
do you have any plans on supporting GPU/CPU underclock overclock and undervolt?
DeluxeMark said:
Actually im using tesla N rom and it isnt pre rooted
Click to expand...
Click to collapse
Goto developer options find root access menu.. See the attachment...
Its not there u need SuperSU..
Otherwise activate root access for apps&adb
anybody using RR 7.1.1 ? have laggy issues?
captian_jb said:
Goto developer options find root access menu.. See the attachment...
Its not there u need SuperSU..
Otherwise activate root access for apps&adb
Click to expand...
Click to collapse
This rom isnt prerooted man
Can some1 review the battery and OS performance after using this kernel ?
New build For CM13
-Evolution CM13 - R1 - New Happy Christmas Edition
-Linux 3.4.51
-Linaro 4.9 CortexA7 optimization
-Many optimization for memory usage and reduce Lag
-Added TCP modes like westwood
-Optimized when compiling: pipeFlags, -O3, Gzip
-Added fast charge v2
- Optimized BFQ planner
-Added toggles for wakelocks (activate them with kernel adiutor)
-Advanced Intellidemand and Intelliactive Governors
-Hotplug AutoSMP added
-Powersuspend added and optimized
-Fsync enabled by default
-DT2W/S2W features
-Added Kcal v2 support
-Many more optimizations for performance and battery saving
Click to expand...
Click to collapse
Download:
https://www.androidfilehost.com/?fid=673368273298918120
**No mirrors please**
Click to expand...
Click to collapse
***Very soon update for nougat***
Waiting update for nougat !
-Evolution_N-R3 is ready (need test it, My device is a falcon and works perfectly)
-Linux 3.4.100
-Linaro 4.9 CortexA7 optimization
-Many optimization for memory usage and reduce Lag
-Added TCP modes like westwood
-Optimized when compiling: pipeFlags, -O3, Lzma compression (very nice)
-Added fast charge v2 deleted (not work correctly)
- More BFQ optimizatios
-Added toggles for wakelocks
-Hotplug MSM (Very nice)
-Powersuspend v1.5 added and optimized
-Fsync enabled by default
-SoundControl 3.5 added
-Added Kcal v2 support
-DT2W/S2W features woohooo
-Selinux enabled in permissive mode
-Many more optimizations for performance and battery saving (check source)[/QUOTE]
Download:
https://www.androidfilehost.com/?fid=529152257862690587
?? downloading !! ??
Wonderful kernel. Zero lag anywhere even on snapchat. My titan feels like a 6p lol. Thanks
EXO_K said:
Wonderful kernel. Zero lag anywhere even on snapchat. My titan feels like a 6p lol. Thanks
Click to expand...
Click to collapse
Thanks for you feedback bro, enjoy??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
Kernel tweaker app:
- CrazySuperKernel Adiutor (need download it from downloads)
Toolchain:
DF 4.9 Toolchain [latest update]
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- input boost
- state notifier
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
Sound:
- Faux sound updated and fixed
- Slimbus overclock
More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- fast charge
- pvs level info
- Kcal v2
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazySuperKernel [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=138590
Download Link CrazySuperKernelAdiutor[Updated]:https://www.androidfilehost.com/?w=files&flid=139961
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
Donators
red5pade
XDA:DevDB Information
CrazySuperKernel, Kernel for the OnePlus One
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazySuperKernel-CM14.1-OPO
Kernel Special Features: check the feature list
Version Information
Status: Stable
Created 2016-12-25
Last Updated 2016-12-25
FAQ
Recommended app : CrazySuperKernel Adiutor
changelogs
v1.0/24-12-16
- initial release
v2.0/27-12-16
- CrazySuperKernel Adiutor (included)
- Deleted Synapse
- added stable faux sound
- some anykernel fixes
v3.0/31-12-16
- added fast charge
- deleted included CSKAdiutor (need download it)
- many fixes
v4.0/02-01-17
- updated fast charge
- pvs level info
- some fixes
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list.
Zzmove profiles
1 ) Default -> will set governor defaults
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay
reserve1
reserve2
More and more kernels
Thanks!
Support fast charge?
assassin0408 said:
Support fast charge?
Click to expand...
Click to collapse
I will add soon usb fast charge and maybe charge control.
Thanks and great job!
Bobbi lim said:
Thanks and great job!
Click to expand...
Click to collapse
Thx m8,new features coming soon.
Merry Christmas!!!!!
assassin0408 said:
Support fast charge?
Click to expand...
Click to collapse
U from galaxy s advance mate
pankspoo said:
U from galaxy s advance mate
Click to expand...
Click to collapse
Yes thats true.. S advance. How do you know me?
Hello, Merry Christmas, I installed this kernel but do not work 2 things:
1- installed the kernel, but when I open Synapse tells me: NO UCI DETECT
2-UKM installed 3.8.1, but the audio portion can not be configured, even if imposed different or custom profiles, the values remain the same, and the sound remains very low.
I apologize for my English, but I'm using a translator !!!
NeGriTa79 said:
Hello, Merry Christmas, I installed this kernel but do not work 2 things:
1- installed the kernel, but when I open Synapse tells me: NO UCI DETECT
2-UKM installed 3.8.1, but the audio portion can not be configured, even if imposed different or custom profiles, the values remain the same, and the sound remains very low.
I apologize for my English, but I'm using a translator !!!
Click to expand...
Click to collapse
The synapse after a reboot should work its created for this device with many new features,its not same with the old synapse.But after many problems from the synapse i will not continue it,the new builds will be include other kernel tweaker app.
CrazyGamerGR said:
The synapse after a reboot should work its created for this device with many new features,its not same with the old synapse.But after many problems from the synapse i will not continue it,the new builds will be include other kernel tweaker app.
Click to expand...
Click to collapse
I downloaded from Synapse PlayStore ... several times ... but it does not go ... to make it work I had to install UKM 3.8.1 ... Where can I find UKM updated for your kernel?
NeGriTa79 said:
I downloaded from Synapse PlayStore ... several times ... but it does not go ... to make it work I had to install UKM 3.8.1 ... Where can I find UKM updated for your kernel?
Click to expand...
Click to collapse
It is included,you just instal synapse app from playstore and it work,you use RR?
CrazyGamerGR said:
It is included,you just instal synapse app from playstore and it work,you use RR?
Click to expand...
Click to collapse
If I do not install UKM not start me Synapse. I mount the NuclearRom 7.1.1 Version 1.2.0 BETA
The audio is very low and you can not configure it nessn so ... I tried to install Faux Sound Control ... But it does not change anything!
NeGriTa79 said:
If I do not install UKM not start me Synapse. I mount the NuclearRom 7.1.1 Version 1.2.0 BETA
The audio is very low and you can not configure it nessn so ... I tried to install Faux Sound Control ... But it does not change anything!
Click to expand...
Click to collapse
Its modded faux sound,tomorrow i ll have my new kernel tweaker app ready to fix all these problems from the Synapse.
CrazyGamerGR said:
Its modded faux sound,tomorrow i ll have my new kernel tweaker app ready to fix all these problems from the Synapse.
Click to expand...
Click to collapse
Very Thanks
Inviato dal mio A0001 utilizzando Tapatalk