Develop Bugs

I'm likely to answer your ROMs questions

HI everybody, I found my self a bit experienced in issues which can appear with GB ROMs for DHD (not so experienced to develop) so I can answer your questions in this thread or PM as you like.
For now I don't answer questions about CM* and MIUI* and not likely to answer questions about FroYo ROMS.

What's the wifi scan interval in ARHD 5.1.1?

It seems for me you know the answer?
EDIT: only now understand your question, as i remebmer it didn't change since FroYo, but I can test if you really need to know it..=)

45 Seconds, I honestly didn't know. Had to check myself.

I've got an easy question. how exactly(!) did you get MDJ's V8 kernel on your phone.
step by step, pls
greets and thanks

Thanks for info, honestly never thought about it because used wi-fi only in home/restraunts... so I used it when I need and then turn of..

Dave-Kay said:
I've got an easy question. how exactly(!) did you get MDJ's V8 kernel on your phone.
step by step, pls
greets and thanks
Click to expand...
Click to collapse
1) Download it from http://forum.xda-developers.com/showthread.php?t=1050106
2) copy it to your /sdcard
3a) Boot into recovery
4a) Select 'install zip from sdcard'
5a) Select 'choose zip from sdcard'
6a) Select your kenrel *zip
7a) w8 until flashed, go back and reboot
3b) Simply choose in ROM Manager 'Install zip from sdcard'
4b) Choose your kernel, and press ok in the appeared window (not necessary to change anything)
EDIT: Note that it will be shown in your kernel info as 'Unknown kernel' you can read about it in 'Issues' in the link i gave...

Thank you so much! I bet, it will be same procedure with everything around here, where everyone simply says "flash it with cwm"?
Greets

Yeap instead of cases when you have to wipe...
When you boot into recovery you'll find 'wipe' choose it and follow steps proposed is easy understandable

Va_Alexander said:
1) Download it from http://forum.xda-developers.com/showthread.php?t=1050106
2) copy it to your /sdcard
3a) Boot into recovery
4a) Select 'install zip from sdcard'
5a) Select 'choose zip from sdcard'
6a) Select your kenrel *zip
7a) w8 until flashed, go back and reboot
3b) Simply choose in ROM Manager 'Install zip from sdcard'
4b) Choose your kernel, and press ok in the appeared window (not necessary to change anything)
EDIT: Note that it will be shown in your kernel info as 'Unknown kernel' you can read about it in 'Issues' in the link i gave...
Click to expand...
Click to collapse
Would this be a similar process if I wanted to flash a MOD onto my ROM? So if I wanted to flash the Sense 3 lock screen or the CRT effect, would I do it in this way..? So boot phone into recovery and then select the *.zip file?
Cheers.

topgun06 said:
Would this be a similar process if I wanted to flash a MOD onto my ROM? So if I wanted to flash the Sense 3 lock screen or the CRT effect, would I do it in this way..? So boot phone into recovery and then select the *.zip file?
Cheers.
Click to expand...
Click to collapse
Yes it would. But not for radio. Note it please.
EDIT sorry gonna leave you now because my brother's breathing gonna make me drunk.... ))))

Va_Alexander said:
Yeap instead of cases when you have to wipe...
When you boot into recovery you'll find 'wipe' choose it and follow steps proposed is easy understandable
Click to expand...
Click to collapse
thx
i'm pretty new to this and everyone's speaking as speaking to the experts around here
i switched to arhd 5.x and was kind of wondering why i have to "flash" a mod for example
so your answer should be good enough fpr http://forum.xda-developers.com/showthread.php?t=1059283 ?
greets

Yes same procedure.
Edit see you tomorrow guys..

Va_Alexander said:
Yes it would. But not for radio. Note it please.
Click to expand...
Click to collapse
Dave-Kay said:
i switched to arhd 5.x and was kind of wondering why i have to "flash" a mod for example
so your answer should be good enough fpr http://forum.xda-developers.com/showthread.php?t=1059283 ?
Click to expand...
Click to collapse
Nice one! Id flashed to 5.1.1 and then the additional MODs caught my eye and I was just unsure how to flash them.

me too
I'm still on 5.1.0 and checking the possibilities. by now, I'm not keen on flashing the mods, 'cause mike just announced 5.1.2 and i wonder, how long it will take him to make it final. the way he works, it shouldn't be long, so i will be prepared, when he reaches this point and untill that, there's no need for me, to do nothing but flashing my device

Va_Alexander said:
HI everybody, I found my self a bit experienced in issues which can appear with GB ROMs for DHD (not so experienced to develop) so I can answer your questions in this thread or PM as you like.
For now I don't answer questions about CM* and MIUI* and not likely to answer questions about FroYo ROMS.
Click to expand...
Click to collapse
FOR TO KNOW WHERE ARE YOU IT IS NECESSARY TO KNOW WHEREFROM YOU COME
i I say this for it of not knowing of froyo and yes of gingerbread your "personalized Q&A " is incomplete LOL

Dave-Kay said:
me too
I'm still on 5.1.0 and checking the possibilities. by now, I'm not keen on flashing the mods, 'cause mike just announced 5.1.2 and i wonder, how long it will take him to make it final. the way he works, it shouldn't be long, so i will be prepared, when he reaches this point and untill that, there's no need for me, to do nothing but flashing my device
Click to expand...
Click to collapse
Yeah I've just seen this announcement too and now I'm thinking about putting the MOD flashing on hold.
But I have another question, with v5.1.2, because I already have v5.1.1, I wont need to do a full wipe. So does this mean I'll just need to use ROM Manager and install the new ROM from *.zip over the top of the old one?
OR do I use EASY-UPGRADE-WIPE-1.3.zip (instead of FULL-WIPE-1.3.zip) and then flash the ROM.
Also with this method am I right in thinking that I won't lose my contacts/messages/call history etc?

Same here.

Hi topgun06
topgun06 said:
Yeah I've just seen this announcement too and now I'm thinking about putting the MOD flashing on hold.
But I have another question, with v5.1.2, because I already have v5.1.1, I wont need to do a full wipe. So does this mean I'll just need to use ROM Manager and install the new ROM from *.zip over the top of the old one?
OR do I use EASY-UPGRADE-WIPE-1.3.zip (instead of FULL-WIPE-1.3.zip) and then flash the ROM.
Also with this method am I right in thinking that I won't lose my contacts/messages/call history etc?
Click to expand...
Click to collapse
mike1986. Wrote it in RED:-
Code:
[COLOR="Blue"][B]Android Revolution HD / 4G 5.1.2[/B] [02.05.2011][/COLOR] - [B]COMING SOON !!![/B]
- Added Wi-Fi fix
- Fixed Adobe Flash Player
- Removed Voice Commander for Telus / Inspire 4G users due to FC's
- Google Talk updated to latest 1.3
- Some more fixes to locations
- Other minor changes
[COLOR="Red"]- No need to full wipe if you have 5.1.x already![/COLOR]
[SIZE="1"]
[COLOR="Blue"][B]Android Revolution HD / 4G 5.1.1[/B][/COLOR]
- Fixed some missing locations
- Fixed microphone issue for Telus / Inspire 4G users
- Added checking signatures hack ([I]Thanks to capychimp[/I])
- Restored original Google Maps 5.3.1
- Rosie Notes Widget should be installed correctly
- Fully working Arabic Patch in the second post
[COLOR="Blue"][B]Android Revolution HD / 4G 5.1.0[/B][/COLOR]
- Re-based on new [B]official[/B] HTC Android 2.3.3 RUU 2.36.405.8
- Fully de-odexed, zipaligned, optimized etc.
- Added script that sets InstallLocation to 1 post boot ([I]Thanks to seo[/I])
- Google Maps 5.3.1 Premium mod included
- Adobe Flash Player updated to latest 10.2.157.51
- Notes widget updated for Android 2.3.3
- Fixed missing apps in Android Market
- Compatibility changes for branded devices
- Protips removed from system
- Some minor changes
[COLOR="Blue"][B]Android Revolution HD / 4G 5.0 RC1[/B][/COLOR]
- [B]New base 2.36.405.5[/B]
- Fully optimized
- Latest Superuser
- Latest Busybox
- Zipaligned
- Zipalign on boot
- init.d support
- sysrw/sysro
- Cleaned from obsolete files
- All other tweaks / mods incorporated from my 3.x ROMs
- No custom kernel yet but it will come soon!
[COLOR="Blue"][B]Android Revolution HD / 4G 3.7[/B][/COLOR]
- Twitter updated to latest 2.0.2
- Google Maps updated to latest 5.3.1
- Facebook updated to latest 1.5.4
- Adobe Flash Player updated to latest 10.2.157.51
- QuickOffice updated to latest 3.2.178
- Fixed high CPU usage
- Added script that sets InstallLocation to 1 post boot ([I]Thanks to seo[/I])
[COLOR="Blue"][B]Android Revolution HD / 4G 3.6[/B][/COLOR]
- New kernel 1.3.8.4 from Apache14
* Stripped down debug info
* Patched up to 32.39
- Lots of new speed tweaks taken from Pyramid ROM
- Improved memory management
- Google Market updated to latest 2.3.6
- Facebook updated to latest 1.5.3
- Fixed mic low volume
- hosts file updated to latest
- HTC bootanimation from newest HTC Sense 3.0
- Added signatures check hack ([I]Thanks to seo[/I])
- Weather finally fixed
- Please do full wipe if you still got weather issues after flashing 3.6
- [B]Please send me mirrors via private message before posting them here[/B]
[COLOR="Blue"][B]Android Revolution HD / 4G 3.5[/B][/COLOR]
- Re-based on official 1.84.661.1 base
- This build seems to be a bit faster
- Sound quality finally fixed and it's much lauder on headphones now
- Added SD Card Speed tweak
- Google Maps updated to latest 5.3.0
- Busybox updated to latest 1.19.0
- Hindi fonts updated
- Superuser updated to 2.3.6.1 FULLY WORKING VERSION
- Weather fix updated. Please flash it only if you have weather sync issues
- Other minor changes and fixes
[COLOR="Blue"][B]Android Revolution HD / 4G older versions changelog - [/B][/COLOR][URL=http://tinyurl.com/6zmktfs]download[/URL]
[/SIZE]
Take Care
TheQuest

topgun06 said:
Yeah I've just seen this announcement too and now I'm thinking about putting the MOD flashing on hold.
But I have another question, with v5.1.2, because I already have v5.1.1, I wont need to do a full wipe. So does this mean I'll just need to use ROM Manager and install the new ROM from *.zip over the top of the old one?
OR do I use EASY-UPGRADE-WIPE-1.3.zip (instead of FULL-WIPE-1.3.zip) and then flash the ROM.
Also with this method am I right in thinking that I won't lose my contacts/messages/call history etc?
Click to expand...
Click to collapse
YES, you only must to flash the new rom _(5.1.2) over the 5.1.1 without wipes.
note: the fullwipe.zip is better for people than flash a lot of times, also you can do full wipe from CWM recovery manually.

{10/8/2011} 2.3.4 {GSM SGT7}[ROM] BOCA √100% TW free!

MAGRATHEA​Click the word to enter
quick message from ME!​I have NEVER, sold this rom. The issue was kernel sourcecode, and a in public dissatisfaction, or argument, if you will.
Again, never have sold ANYTHING! But according to the GPL, I can.
According to xda, having a contributor release, is acceptable, but nor preferred by xda.
Therefore: contributors program will remain.
Kernel source added: got to my website, and hit the information tab.
NO part of BOCA may be relinked, nor uploaded anywhere. Period. Nor distributed in whole or part. With out my permission, and possibly the other developers whose work is in BOCA.
BOCA 2.3.7 Contributor test/stable version uploaded
BOCA Heretic 2.3.4 now available for P1000 & P1000l/n users. Choose from ablocked or not ad blocked
BOCA Secret Agent 2.3.4 (with fixed mount points) available for P1000 & P1000l/n users
BOCA High Voltage 2.3.4 (with fixed mount points) available for P1000 & P1000l/n users
BOCA Secret Agent 2.3.4 V2 patch uploaded
BOCA PR 2.3.4 (private reserve) patch uploaded
My web now has a forum, chat and much more!
Feel free to post on XDA, but I will not be here. Come to my website!

CHANGELOG/UPDATES​
10/15/2011
came out of my dark dank cave, momentarily, to bring my contributors a gift.
UPDATE/CHANGELOG
(I will write out a complete changelog soon, guys, I just had to gather all the info from scratch again) toolchain I use to build BOCA is:2009/linux-x86/arm-eabi-4.4.3/arm-eabi-gcc
some changes, in this BOCA 2.3.7 Contributor test #3 include:
3 new governors (smartassV2, smoothass and lagfree) thanks ronis and humbros! BOCA has 9 to choose from
new recovery with both internal & external support,
can now browse in incognito mode (leave no cookies, history or cache behind!)
Secret Agent theme by default,
cyanobread and androidian theme chooser themes added,
Gtalk with video over 3g or wifi,
Giff animations work in browser,
you can now use your wireless keyboard properly,
10 point touch, 1.2, 1.4 ghz
VTL Launcher, blinker tab, es task manager, new superuser, car home, touchscreen booster - included,
FUGU tweaks,
System blur removed,
New status bar hide animation,
fully working market,
blue black gmail,
Auto download email attachments: false,
stepping kernel - thanks kodaxi
large market downloads should be fixed, thanks tek
default screen timeout is now 10 minutes,
tablet tweak icons rearranged to mirror our tabs soft buttons,
PSP and wiimotes should work - need someone to confirm
Wifi on by default
screenshot added to power menu,
power menu rewrite to reflect its a tablet,not a phone,
home added to power menu,
Default ua browser is: ghasp ipad! RIP Steve Jobs,
Facebook zynga games work from Facebook.com now in browser now, try Linux UA,
HD world boot animation,
tweaKr removed juwe ram script removed, heretic mode removed, for now! Writing v2 ,
Screenshot orientation fixed,
Status bar widened, to 35, up from 25
Statusbar icons enlarged to 35, up from 25
Tablet tweak icons moved off of the edge of the screen-it bugged me,
Fullscreen disabled(means you always have a status bar, hide it with arrow, bring it back with volume down)
Wifi scan set to 150,
Dalvic vM set to: dalvik.vm.heapstartsize=5m, dalvik.vm.heapgrowthlimit=64m, dalvik.vm.heapsize=128m,
maxevents per second:85
LCD density at 190- I like 180 better,
Dock settings should appear when you dock,
dock sounds activated,
bluetooth everything should be fixed,
there is still a bug were the hotspot wont password secure, stays open,
video playback fixed,
Games play nicely,
you tube HDplayback fixed
tons of system sounds to choose from
61 languages supported natively
much faster browser scroll, zoom and performance
way better battery
New default load 360 drag lockscreen (ring)
3rd party app install warning removed
Tons of frameworks and system ui xml work!
10/8/11
UPDATE:
As most of you know, my computer is, to be kind, having some issues.
Please begin on page 32, post #319, if you want to catch up on the issue. also see UPDATE #1 10/3/2011.
The support and concern, is heart warming.
Thank you!
I have added my kernel source, HERE
Hopefully, it is everything you need to build the newest BOCA 2.6.35 kernel for my 2.3.7 release.
Here is my ram disk recovery cpio HERE
update #3
the revolution has begun (well a couple days ago)
http://theandroiddoor.weebly.com/
update #2
Contributor 2.3.7 nightly stable test release uploaded
If you are a contributor, and do not have the password, please pm me
How to become a BOCA contributor:
(In no particular order)
Paypal
Device donate/loan/ or help/support of BOCA port to said device
Promote BOCA honestly on alternative websites
Help users anyway you can
Help me anyway u can
Bug fixes
Giving detailed reviews with honest opinion, of course
Be active in the production of BOCA
BTW: I need someone who knows XML well, and wants to try something new
Etc.......
As usual, after a few, when contributors report no bugs, it get released to everyone else.
UPDATE #1
10/3/2011
Well, XDA, bad news
My computer is down, out for the count. I believe it is the motherboard, but it needs further investigation. A nice BOCA users has offered his old motherboard, and I will contact this user, and see.
But, if it is not doable, I am afraid, I must stop making roms, and developing in general, as I cannot afford a new computer.
Sometime tonight, I will release 2.3.7 nightly test port, for contributors.
The UI is not finished, but it is very stable, daily driver status, I believe.
I ask them to not re-release, link, mirror nor distribute.
Why release to them now, and not everyone?
They actually offered help, helped, or donated in some way. They did not demand a thing, without giving something in return. The total hours I have spent these last months developing a rom, is uncountable. Something like 1 cent and hour. Most likely less than that.
There are many reasons I release my work, and yes, one of the perks, other than seeing others happy with and using my hard work, is paypal donations, and I thank every contributor- no matter how they contributed- as a new friend. thank you.
9/30/2011
http://forum.xda-developers.com/showpost.php?p=18003232&postcount=266
9/20/11
http://magrathearoms.weebly.com/patches.html
added a new patch.
its a look into BOCA´s future
9/11/2011
Secret Agent added
read the instructions carefully for BOCA Heretic SA
http://magrathearoms.weebly.com/
(Don't forget to vote!)
9/6/2011
new votes!! Vote now!! ( http://magrathearoms.weebly.com/whats-comming--votes.html )
website redesigned
more goodies!
09/04/2011
http://forum.xda-developers.com/showpost.php?p=17269385&postcount=137
Google is still down, also
Also:
trouble coming from overcome?
I suggest that people coming from overcomes latest reference this.
http://forum.xda-developers.com/showpost.php?p=17066166&postcount=47
(At the bottom)
And make sure you have the right BOCA. IE, p1000 or P1000L/N
9/2/2011
Uploaded more flashable fonts zips.
uploaded HTC g2 BOCA kernel
More web design
9/1/2011
UPDATE 2
Google android source codes have been removed.
Google attacked by hackers, and for security reasons, they pulled their public repositories.
I have no idea when they will open again.
https://twitter.com/#!/warty9
This basically means every android device development (source roms and custom kernels) is in limbo, for now
Until then BOCA developement is on hold, mostly.
No new kernel.
(New kernel hopes were to have recovery that reads internal sdcard, bfg scheduler and voodoo also)
But can't compile without the source code.
HTC G2 kernel will be uploaded later today.
Ill look into a terminal copy paste that mounts your internal sdcard in recovery,
Until then.
-diz
UPDATE 1
website redesigned.
flashable font zips added.
I am looking for a new forum client, so thats coming soon too.​
THANKS SECTION
pssst its a link​

special thanks section, with dev links​
Gojimi - for permission to use your launcher.
WEBPAGE
Dblfstr - for creating and also allowing BOCA to have your modded Netflix app.
and so many colors available!
xda thread
waaydownsouth - for your awesome tweaKr app
Humbertos, and ronis two awesome p1000l/n devs
thepitbull - for always being there so I can talk his ear off
more to come......

Install Instructions
For Coming From Any Rom That isn't BOCA, MIUI or unofficial port based off of CM7 (Teks)
(see below for those instructions)​
As you all know, when switching from rom to rom, something called a safe stock re-partitioned is very much preferred, almost required. Even more so, when jumping from roms with different os bases, example is going from a 2.3 based rom to a 2.3.4 (or reverse).
You need to do this process to kinda bleach out anything that remains of the old rom, as many times these arent properly cleared through a recovery erase, and can leave behind bits and pieces that can, and frequently do, disrupt the next rom you try to run. This is never a good thing, as it can cause anything from a bootloop to mysterious ghost like behaviors. Not to mention many things many not work correctly in your new rom.
Team Overcome has created, or basically repacked a way to do this. Many thanks!!!!
TeamOvercome website HERE
1) Go to Overcomes website, and download a zip called: ROM | 001001-GB-Stock-Safe-v5
(this is the base, non branded 'official' release of Gingerbread from Samsung. Overcome has made a few modifications to this file, and added Odin, modems and Samsung SGT driver installer to the zip)
2) While at the Overcome site, also download a zip called: KERNEL | 002001-Overcome Kernel V3.3.1 (TAR)
(this is a kernel made by AB, with some nice work done to it. But what we need it for is to convert our system to ext4. It will not run BOCA)
3) Unzip the GB-Stock zip, and open it up.
4) Open SAMSUNG_USB_Driver_for_Mobile_Phones_x86, and run it. This will reinstall, and clean up any old drivers for your tab.
5) plug in your tab when done, and let you computer fully install you SGT's drivers. Once its finished, unplug your tab.
6) Unplug any USB devices from your computer, & Open Odin3_v1.7, once it opens, plug your tab back in to your computer, in download mode.
Under ID:COM, a yellow window should now state your tabs is connected.
7) Place gt-p1000_mr.pit inside the PIT slot, PDA slot, place: GB_Stock_Safe_v5.tar
8) Make sure Re-partition, Auto Reboot and F. Reset Time are checked, press start.
9) Once finished, and your tab has rebooted, press reset in Odin. On your tab, skip through all the setup options, and reboot into download mode.
10) Plug your tab back into your computer, and place: 002001-Overcome_Kernel_v3.3.1.tar into the PDA slot, and press start.
11) Let your tabs sexy robot voice convert your system, once done, boot into recovery, clear everything, go to zip installer, and choose BOCA from your external SD card. Let install, and then reboot.
12) As with ANY rom, please do a full battery calibration with the included apk, ASAP.
13) Enjoy BOCA!!
INSTALL INSTRUCTIONS
(For when coming from BOCA, MIUI or unofficial port based off of CM7​1) Boot into your current recovery and clear dalvic cache
2) Go to zip installer and choose BOCA from your external SD card
3) Boot into BOCA, and reboot again.
4) As with ANY rom, please do a full battery calibration with the included apk, ASAP.

Sorry maybe I need new glasses but I can't find the link to download the rom from your website.

nunyabiziz said:
Sorry maybe I need new glasses but I can't find the link to download the rom from your website.
Click to expand...
Click to collapse
Every tab also has drop down section.
There are forums there where i respond faster.

Am I only 1 that confuse why you do like this?
Create new topic, change date from 28/8 to 26/8 .
Still no download link.
Still wait to use V2 through.

zoftdev said:
Am I only 1 that confuse why you do like this?
Create new topic, change date from 28/8 to 26/8 .
Still no download link.
Still wait to use V2 through.
Click to expand...
Click to collapse
Well since today is the 26th, and I released today. That would make alot of sense.
All u have to do is follow the link in the very first and third posts.
It will take you to my website.
On my website, there are atleast 6 different Boca versions, each on their own pulldown.
this post is the v2 announcement thread.
Other was v1 announcement thread.
Just click on the word MAGRATHEA

dizgustipated said:
Well since today is the 26th, and I released today. That would make alot of sense.
All u have to do is follow the link in the very first and third posts.
It will take you to my website.
On my website, there are atleast 6 different Boca versions, each on their own pulldown.
this post is the v2 announcement thread.
Other was v1 announcement thread.
Just click on the word MAGRATHEA
Click to expand...
Click to collapse
roger that!
So this is the end of long waiting !

for me it won´t work. doesnt boot? do you have any instalationguide for me?

ironcross said:
for me it won´t work. doesnt boot? do you have any instalationguide for me?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=15716926&postcount=5

won't boot
- stock rom+dip7 kernel
- update zip by CWM
Edit. Latest Dip7 kernel may not compatible.
Flash gb safe v5 and overcome latest kernel then boca is ok.

Awesome! Feels faster!
Smooth transition from Secret Agent, restored all apps and system data using TB, just had to wipe Gmail.
Go @diz!
- XDA Premium App - SGT-P1000N BOCA HERETIC

zoftdev said:
won't boot
- stock rom+dip7 kernel
- update zip by CWM
Click to expand...
Click to collapse
you should be asking these q's on my website sites forum, as im not here anymore after this.
i am there
you'll get much faster answers.
and I've been up two days straight.
I need sleep, bad
But like I said, feel free to post here, as users like to see both the good and the bad before they decide.
try a reboot into BOCA ll Recovery, and do the cache whipes again.
If that don't work try a fix permissions.
No?
If that doest work, I need to check dip7 new kernel.
Its a new release that came after BOCA. Maybe its not compatable anymore.
If everything fails, u need to restock and try from a different kernel.

i have done like the guide will not boot. 1.5 works great for me. will v2 work with my euro tab?

ironcross said:
i have done like the guide will not boot. 1.5 works great for me. will v2 work with my euro tab?
Click to expand...
Click to collapse
If you can get 1.5 to boot up,
just flash heretic right over it.
And yes. Euro tab is p1000.
Boca has versions for p1000 and p1000L/N also

ok, i see only p1000L/N version to download is that my failure or is that the same file`?
thanks for your quick answer. i like your rom

ironcross said:
ok, i see only p1000L/N version to download is that my failure or is that the same file`?
thanks for your quick answer. i like your rom
Click to expand...
Click to collapse
That's your problem, you are not supposed to use the P1000L/N version. Click on top of the menu, not down in the P1000L Version.
- XDA Premium App - SGT-P1000N BOCA HERETIC

thx i have found in last minutes

ironcross said:
ok, i see only p1000L/N version to download is that my failure or is that the same file`?
thanks for your quick answer. i like your rom
Click to expand...
Click to collapse
Check the forums on my site.
You'll find your answer very quickly

[PATCH][ICS][CM9] PDroid patch for CM9 - CWM Flashable ZIP

Hey guys,
Alroger has included a patched framework into one of his builds, offering support for PDroid. Based on their work, the modified JAR files seem to do the work nicely. Therefore, you can find the patched and unpatched versions of the files in CWM flashable format attached to this post.
Please report back if it works for you, as it will be valuable feedback to the team porting PDroid to ICS.
For more info on PDroid, go here:http://forum.xda-developers.com/showthread.php?t=1357056
For more info on the port of PDroid to ICS, go here: http://forum.xda-developers.com/showthread.php?t=1554960
Notes & Observations
- Only compatible with official CM9 (Android 4.0.3 and 4.0.4).
- Only compatible with Recovery 3.0.x or later (should not be a problem with recent/modern ROMs/builds).
- This build is only compatible with SGT7 device variants and the CM9 builds released for these devices.
However, if you indeed get into trouble, try clearing cache, dalvik cache and flashing your original ROM on top of this package. No data wipe should be required!
Download & Install:
Download OP post attachment of your choice (based on CM9 0421 nightly)
Flash P1-PDroid-CM9-0421-CWM.ON.v2.zip to apply patch
Flash P1-PDroid-CM9-0421-CWM.OFF.v2.zip to remove patch
Save zips onto your Tab
Reboot in Recovery mode
Install zip from SD Card
Reboot tab & wait for Android to upgrade
Install PDroid app from market (market link)
Enjoy
Disclaimer
I will not offer support to anyone in case these ZIPs cause any harm or damage in any way. You are responsible of your own actions including flashing anything to your device!
Thanks and Credits
Thanks, in no particular order to these guys:
svyat for the initial work
pastime1971 for the ICS port
alroger for building the patched framework files compatible with CM9 and giving me his blessing to pack the patched framework files
Let me know of any issues or success stories in the thread.
Peace,
C.

I don't need to flash this patch as I already use alroger's build of CM9 ROM with PDroid (2012-04-24), but I just wanted to say thank you, as this is excellent news for next time when I don't use a ROM that already includes PDroid patches!
http://cafe-ti.blog.br/1524~sgt7-p1000-android-ics-cm9-mtd.html

Is this device specific?

It runs on all SGT7 variants running official CM9 build.
It won't work for other ROMs or other devices than SGT7.
PS: if it runs on something else, it is only by chance!
Peace,
C.

Ok...thanks anyway.
From the OP it read like it was good for any cm9.
Hope nobody flashes it on the wrong device.
Luckily I was smart enough to ask first.

I thought it is common sense since this is SGT7 forum?
Sent from my GT-P1000 using XDA

priyana said:
I thought it is common sense since this is SGT7 forum?
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Just followed a link that he posted from a different thread....
And the xda app doesn't say what device thread you're in if you follow a link.

will this work on a sph-p100 running update-cm-9-20120425-NIGHTLY-p1c-signed

LivnDream said:
will this work on a sph-p100 running update-cm-9-20120425-NIGHTLY-p1c-signed
Click to expand...
Click to collapse
Yes, @cheatman's post is exactly for the official cm9 nightly p1 and p1c (Galaxy Tab 7 GSM and CDMA).
And he offers the removal of the patch also, in case you have any problems.

thanks will give it a go

Hi Cheatman,
Will this work on AOKP ICS?
Or will it need a different one? Can you build one?
Thanks!!

First thing: updated OP post to avoid confusion.
Secondly @priyana: It will probably break AOKP builds as the framework is heavily modified compared to CM9. You could try to flash it and report back, but be ready to flash AOKP again on top of it if it bugs out.
If you have issues, you will not need to restock or wipe data. You can just flash AOKP again on top of it and it should return to normal after a reboot.
Peace,
C.

Thanks Cheatman.
Just to feed back here.
I just tried applying it on my aokp build #31 but can't boot into the OS.
Flashed the from again on top of it and I am back to aokp like you said.
Sent from my GT-P1000 using XDA

Same for me with AOKP. After installing the ON package it boots up to the part of updating, the next start it doesn't boot up anymore and is stuck on the bootlogo and makes a short vibration in repeated intervalls.
Installed the OFF package, updated on first boot, doesn't work anymore on next boot just like the ON package.
Too bad for me as I'm going to use the train now and could've used the tab.
Thanks anyway and I'm still interested in this and would hope to see a fix.

You can still use the tab by flashing aokp again.
All data intact in my case.
Sent from my GT-P1000 using XDA

I know that and did that already because OP wrote that in the first post:
"However, if you indeed get into trouble, try clearing cache, dalvik cache and flashing your original ROM on top of this package."
Works as usual but no pdroid.

OK.
Read you wrongly because you said too bad, you "could have used the tab"
I thought you meant now it is unusable/broken, hence the reminder.
Sent from my GT-P1000 using XDA

[FAQ - All You Need] GT-S7560M Galaxy Ace II x / Ace2x

Welcome to the Samsung Galaxy Ace II x / GT-S7560M Unofficial FAQ!
-The Galaxy TREND GT-S7560 is also supported-
==>THIS IS AN OUTDATED PHONE AND THE LINKS/FILES BELOW MAY OR MAY NOT BE THERE ANYMORE<==
!!SEE POST #2 BELOW FOR LINKS
Frequently Asked Questions:
1- "Flash with CUSTOM RECOVERY (TWRP/CWM)" : If you still have the stock recovery, download and use Daver18qc's Root Kit Below to install a custom recovery from the CUSTOM RECOVERIES header in post #2.
2- "Flash with ODIN" : ODIN is inside Daver18qc's Root Kit *With Detailed Instructions* below.
3- "Push with ADB" : You need to download and install Android's Development Kit and then refer to the small tutorial below !
4- If you've got problems with ODIN or ADB, make sure that you have USB Debugging Enabled under Settings > Developer Options.
--Make sure you have only 1 device showing in ODIN (Only 1 little square filled at the top-left)
--Also make sure Kies.exe is not running on the computer!
5- There are custom ROMs, such as CyanogenMOD 10 and 11, OmniROM 4.4, and more. There is no Lollipop ROM just yet, though it is slowly being worked on. A lot of work is needed to update our device code for Lollipop. You can find links to different custom ROMs for our device in post #2.
6- There is NO free method to UNLOCK SIM yet.
7- If you want to flash any deodexed rom with a custom recovery, you must first flash the complete corresponding ROM from SamMobile. That means deodexed Guatemala need to be flashed over Guatemala, not over Panama or Canada. Same goes for deodexed Australia.
8- If you get a Yellow warning triangle on boot after flashing something, use TriangleAway to remove it and reset the flash counter to 0. (On the page, use the provided TriangleAway apk file available for download at the bottom of the first post)
9- Flashing a ROM from Guatemala or Australia will not change your service provider, you will stay with Bell/Koodo/Rogers even if these companies don't exist in Guatemala.
10- Sometimes when flashing ROMS, your carrier will show as "Bell" even though you are on Virgin / Solo, this is normal as these are 2 sub-companies of Bell.
11- When you flash ANYTHING with a custom recovery, be sure to Wipe Cache and Wipe Dalvik Cache (advanced menu) before rebooting.
12- For ANY kind of flashing from a Windows computer, you will need the Samsung USB Drivers first and foremost, before doing anything else. If you're on Linux/Ubuntu, install Heimdall and search for tutorials for how to use it on XDA or Google.
13- If you have the Galaxy Trend GT-S7560 and CWM freezes while flashing a custom rom, then re-cook the rom inside the Kitchen with these tweaks:
Code:
For galaxy trend s7560
When building rom in kitchen, select Interactive Mode(1). after zipaling;
1. edit META-INF/com/google/android/updater-script in working folder and change " format("ext4", "EMMC", "/dev/block/mmcblk0p16"); " to " format("ext4", "EMMC", "/dev/block/mmcblk0p16", "0", "/system"); "
2. extract cm11 for ace 2x and replace META-INF/com/google/android/update-binary from cm11 to your rom
======================================END OF FAQ=============================================
Short Tutorials :
Buttons combinations (phone must be shutdown before !)
Download Mode : VOLUME DOWN+HOME+POWER
Recovery Mode : VOLUME DOWN+VOLUME UP+HOME+POWER
How to "Push with ADB" :
Install the Android Development Kit
Goto "platform tools" folder
Open a command prompt
Connect your phone with USB cable and USB Debugging enabled (developer settings)
Type in the command prompt:
-adb remount
-adb push "yourfilename" "/your/destination"
-adb reboot
example: "adb push SystemUI.apk /system/app/"
How to flash with ODIN :
-If your ROM is zipped, unzip it to a folder until you got a ".TAR.MD5" file
-Load up ODIN
-Shutdown your Phone
-Boot your Phone in Download Mode
-Plug in your USB cable, Odin should recognize the Phone and fill up a small square at the top left.
-Make sure only "F.Reset Time", "Auto Reboot" and "PDA" are check-marked in ODIN
-Load up your ".TAR.MD5" in the PDA section of ODIN
-Flash, wait for ODIN to tell you (Succeeded : 1, Failed : 0)
-Done.
How to flash CM11 (CyanogenMod11) by Alex150892 :
1.Install Australia MH3 stock rom with Odin
2.Download Root Kit and follow instructions inside (follow it carefully from beginning to the end)
3.Open cwm recovery and Wipe data/cache,and also wipe dalvik cache
4.Install CyanogenMod 11
5.Install 4.4 Gapps
6.(optional) Install ba2x kernel for CyanogenMod 11
7.Reboot and enjoy...
Note that first boot will take a while,so leave it for ~10mins

Links:
------CUSTOM ROMS-------
Note: None of the custom ROMs are bug-free. Some of them are more stable and bug-free than others though. Some common bugs among all the ROMs are lack of full camera resolution (the rear camera only captures images at 3MP instead of the 5MP in Stock ROM) and lack of bluetooth (our chipset doesn't support the newer bluetooth method used in Android 4.2+).
CyanogenMOD 10.2/11 by SeannyM UNSUPPORTED
CyanogenMOD 10.1 (Android 4.2.2) by jonypx09 UNSUPPORTED
CyanogenMOD 10.2 (Android 4.3.1) by Codename13 UNSUPPORTED
Beanstalk 4.4.275 (Android 4.4.2) by jonypx09UNSUPPORTED
CyanogenMOD 11 (Android 4.4.4) by jonypx09
OmniROM 4.4.4 (Android 4.4.4) by Codename13
------STOCK ROMS-------
(These are compatible with ALL countries and should be flashed if you want the latest version of ICS on your phone, regardless of where you live or who your phone service provider is.)
Stock firmwares from Sammobile
[URL="http://www.sammobile.com/forum/register.php"]You Must register on SamMobile by clicking here first! (FREE)[/URL]
Modified stock firmware "Stock II X Plus" by Codename13. It is deodexed, rooted, has init.d functionality, has ADB support, doesn't overwrite your custom recovery with the stock one, and other misc. changes, plus it shouldn't trigger the triangle flash counter.
If you install a stock ROM/firmware over a custom ROM and you get a bootloop, meaning you probably forgot to wipe data, and you're unable to boot to recovery, flash this package (by Codename13) with Odin to wipe your data partition, which should allow you to boot into the stock ROM.
------CUSTOM KERNELS-------
Sadman2's kernels for ICS 4.0.4 with GPU Overclock !
-Flash with CUSTOM RECOVERY, Wipe Cache and Dalvik Cache, Reboot.
V1: http://www36.zippyshare.com/v/15770700/file.html : OC CPU 1.2GHZ
V2: http://www43.zippyshare.com/v/33249511/file.html : OC CPU 1.3GHZ
V3: https://drive.google.com/file/d/0BzqKRicqg1wVdl9kQnI4NUk1ZTA/edit?usp=sharing : OC CPU 1.2GHZ GPU 275MHZ
V4: http://www11.zippyshare.com/v/61114227/file.html : OC CPU 1.3GHZ GPU 325MHZ
BA2X (Better Ace 2 X) 2.0 for Stock ROM by Codename13 UNSUPPORTED
SeannyM's Overclocked/Modded Kernels For Stock ROM(Flash with CUSTOM RECOVERY) UNSUPPORTED (I think)
[/B]-A vast range of frequencies to choose from, you can start with 1094mhz and if your phone is stable and doesn't reboot on it's own you can then go up a couple more until you get to a point where your phone won't boot, then you need to go back down in frequencies.
Most people seem to hit a wall around 1248mhz.
-To take full advantage of this Kernel, you should install No-Frills CPU Control
--Set the maximum frequency to the maximum possible
--Set the minimum to 240 or 320
--Set the governor to SmartAssV2
--Set the I/O sheculer to VR
------CUSTOM RECOVERIES-------
List of custom recoveries (thread maintained by Codename13)
http://forum.xda-developers.com/showthread.php?t=2682888
------OTHER-------
Possible fix to CM10.2 WiFi problems suggested by Anas Karbila
-Install that app from the market and use it to correct the problem.
https://play.google.com/store/apps/details?id=co.in.zextr.wcf
Possible fix to ICS 4.0.4 with WiFi problems on Sadman2's Kernels :
-Use a root file explorer to overwrite the original files in /system/lib/modules with those from the link below.
http://forum.xda-developers.com/attachment.php?attachmentid=2630852&d=1394823897
Daver18qc's GT-S7560M Root Kit (With Detailed Instructions!) v.3
Daver18qc's List of Apps that are Safe To Delete (Once Rooted!):Guatemela 'MG2 or Stock ROM
===========================================================================================
That one might be bugged, try the "Stock Guatemala MG2" + "Deodexed Guatemala" below if you have problems!
Daver18qc's Deodexed/Rooted Australia MH3 ROM (Latest 24sept2013) (Flash With CUSTOM RECOVERY Over Australia 'MH3 ROM, Wipe Cache/Dalvik)
===========================================================================================
Daver18qc's Deodexed/Rooted Guatemala MG2 ROM (Flash With CUSTOM RECOVERY Over Stock Guatemala MG2, Wipe Cache/Dalvik) *Confirmed Working*
Thanks to Viper520 for ViPER4Android
Daver18qc's Pack of Modded SystemUI ("Push" with ADB)
-(Download the one with the notifications toggles you want, the others buttons are removed!)
Codename13's ModPack UNSUPPORTED (Flash with CWM) for Deodexed ROMS ONLY!
Codename13's Panama Stock ROM (Flash with CUSTOM RECOVERY)
Codename13's Insecure Stock Kernel (Flash with ODIN in PDA Section)
OstrichX's CyanogenMOD 10.1 Work In Progress Page
Mods made by other people that works on GT-S7560M:
Cbass15's Black Theme AOSP SMS App!
(Delete /system/app/SecMMS.apk, Copy this file to /system/app/ and DON'T RENAME IT, then REBOOT!)
Screenshot of the CBASS15's AOSP Messaging
Dsixda's KITCHEN
You can deodex and customize almost any ROM made for this phone using this version of the Kitchen.
You will need a computer running Linux, either on the hard drive or in a virtual machine inside Windows.
You will need extensive knowledge of the Linux commands as everything is inside a terminal (a kind of MS-DOS command prompt)
If you don't know what Linux is, don't bother, this is out of your reach and nobody will teach you here.
Learn it somewhere else and come back here when you know where you're going with this.
DOWNLOAD 0.223 KITCHEN
DOWNLOAD EDIFY_DEFS FILE
-(The EDIFY_DEFS file is necessary to make a working ROM, you will softbrick your phone if you don't put this file inside your edify-defs folder in the kitchen folder.)
MANY THANKS TO : SeannyM, jonypx09, Codename13, OstrichX and all the others who made this possible!
POST YOUR QUESTIONS IN THE MAIN THREAD HERE PLEASE!

daver18qc said:
FAQ:
6- There is NO free method to UNLOCK SIM yet.
Click to expand...
Click to collapse
till there is some way to unlock the GT-S7560m (hopefully soon)
may i suggest http://forum.xda-developers.com/showpost.php?p=44776737&postcount=1916
unlockclient co
self contained software (means no 24 hour wait for email) takes seconds to do
i searched and search for hours yesterday.. found that one post above
and pretty much nothing else.. the huge 240 page 7560m thread has people asking every second page.. no joke
more info needs to be given about this. and maybe some research on how to do it for free.. but in the mean time:
i took a chance and got it.. and was not disappointed at all (works just like youtube vid)
btw im just a frustrated end user, not affiliated with any company

I would like to download this: Daver18qc's Deodexed/Rooted Australia ROM (Latest 24sept2013) but the DropBox download link isn't working...

Links are dead
Hi...
links for stock versions are not working...
wanted to download the guatemala stock to flash other rom later, but the link is dead...
any one has a backup by any chance?
im currently on the canadian rom i guess... already got root and CWM
thanks1

mertonv said:
Hi...
links for stock versions are not working...
wanted to download the guatemala stock to flash other rom later, but the link is dead...
any one has a backup by any chance?
im currently on the canadian rom i guess... already got root and CWM
thanks1
Click to expand...
Click to collapse
samsung-updates.com has most of the Ace II X firmwares on alternate mirrors such as RapidGator and ul.to.

Links are dead
Codename13 said:
samsung-updates.com has most of the Ace II X firmwares on alternate mirrors such as RapidGator and ul.to.
Click to expand...
Click to collapse
Hi!
Thanks for pointing out where...
samsung-updates .com/device/?id=GT-S7560M
Im assuming this is the one im looking for
Galaxy Ace IIx GT-S7560M PGU S7560MUBAMG2
Unfortunately, the links on that site seem broken too... unless its me and i cant get them to work...
looking with the code "S7560MUBAMG2" i found a version PBS, CPA and TCP (panama, panama and mexico), all three have the same build date and change list numbers (05.07.2013 and 1230914)...
im downloading PBS version, its a 532mb file, is that right?... no wonder the device sucks that much... that image is bigger than the stock for my the TF300t... this **** is bloated
is this the same image as guatemala?
Can't seem to find the PGU anywhere... all links are to hotfile (which seems dead) or broken
thanks anyway...
i wanted to test the slimbean rom but guess i'll have to wait a while then...
the device is slow, but rather have a slow phone than a bricked one for not following the procedure right
this device

Flash with CWM
daver18qc said:
Frequently Asked Questions:
1- "Flash with CWM" : If you still have the stock recovery, download and use Daver18qc's Root Kit Below to install CWM.
Click to expand...
Click to collapse
Well, couldn't the actual answer tell you exactly what you do once you've installed CWM...
I seem to have installed it — the Root Kit install finished successfully and there's one entry in Apps for "Superuser" that wasn't there before — but I can't actually do anything with it. How do you "Flash with CWM"?
---------- Post added at 11:16 PM ---------- Previous post was at 11:08 PM ----------
mertonv said:
Hi!
Thanks for pointing out where...
samsung-updates .com/device/?id=GT-S7560M
Im assuming this is the one im looking for
Galaxy Ace IIx GT-S7560M PGU S7560MUBAMG2
Unfortunately, the links on that site seem broken too... unless its me and i cant get them to work...
…
Can't seem to find the PGU anywhere... all links are to hotfile (which seems dead) or broken
thanks anyway...
Click to expand...
Click to collapse
AIUI, you don't need to use MG2. Try the third link (XSA) which will give you three options to download the MH3 firmware for Australia. That has three working download links.

IwasLegend said:
Well, couldn't the actual answer tell you exactly what you do once you've installed CWM...
I seem to have installed it — the Root Kit install finished successfully and there's one entry in Apps for "Superuser" that wasn't there before — but I can't actually do anything with it. How do you "Flash with CWM"?
Click to expand...
Click to collapse
You did it, since flashing with CWM puts the SUPERUSER program inside the phone. So if you have that, then you have indeed flashed with CWM, because it is the only way to flash the root package!
The instructions in the root kit apply to any other update/package that you want to flash with CWM.
IwasLegend said:
AIUI, you don't need to use MG2. Try the third link (XSA) which will give you three options to download the MH3 firmware for Australia. That has three working download links.
Click to expand...
Click to collapse
@mertonv:
Use Australia MH3 instead. SAMMOBILE got their hosting server shut down so the links for stock firmware are invalid, but they are supposed to get fixed soon, i hope.
EDIT: The Australia Stock ROM link works at the moment, maybe you didn't LOG IN / REGISTER on SAMMOBILE before trying to download and that's why you don't see anything, but at this time, it works !

Bluetooth and Camera still broken/buggy?
Can anyone confirm that there isn't a custom ROM (10.2 or 11) where there are issues with Bluetooth and the camera? I know the FAQ says there are issues but that was in October.

Service
Since flashing CM 10.2, I haven't been able to get service and if somehow I manage I only get it temporarily. Can someone explain as to why?

Downloading Australia MH3
When I go to download file, it takes me to http://terafile.co/5d8b16638748 and the problem is the download link isn't working for me. I do the captcha and everything but when it does to download it just doesn't want to download.

CasMz said:
When I go to download file, it takes me to http://terafile.co/5d8b16638748 and the problem is the download link isn't working for me. I do the captcha and everything but when it does to download it just doesn't want to download.
Click to expand...
Click to collapse
you have to keep refreshing(F5) until it goes to the download.

Does anyone try Triangle Away? is it complete safe?

miki89 said:
Does anyone try Triangle Away? is it complete safe?
Click to expand...
Click to collapse
It's been tested and it's safe, aside from the extremely slim risk of bricking your device while using Triangle Away (but I've never heard of anybody doing this). Chainfire hosts a free version here on XDA, although being free, it doesn't include every feature. But it works well enough.

there is any application or rom that Turn the hardware buttons light up when I have Missed calls or message?
ACE 2
thanks

thmls said:
there is any application or rom that Turn the hardware buttons light up when I have Missed calls or message?
ACE 2
thanks
Click to expand...
Click to collapse
If you are indeed using an Ace 2, we can't help you. This thread is one of the few for the Galacy Ace II X, a completely different device, other than similiar sounding names.
Speaking of BLN, I remember having recently seen an app that mimicks it very well. I'll message you if I remember what it was called.
For the BA2X 2.0, I'm working on implementing BLN in the kernel along with some other things. Our devices don't have the same kernel, but I could possibly create a universal BLN diff for others. I'm trying to diff a BLN module source for the Galaxy R and Captivate, so hopefully I can get it working.

Codename13 said:
If you are indeed using an Ace 2, we can't help you. This thread is one of the few for the Galacy Ace II X, a completely different device, other than similiar sounding names.
Speaking of BLN, I remember having recently seen an app that mimicks it very well. I'll message you if I remember what it was called.
For the BA2X 2.0, I'm working on implementing BLN in the kernel along with some other things. Our devices don't have the same kernel, but I could possibly create a universal BLN diff for others. I'm trying to diff a BLN module source for the Galaxy R and Captivate, so hopefully I can get it working.
Click to expand...
Click to collapse
So is the Kitkat update still being worked on or not? You say its being worked on in the first post but later say he's stopped. Also, are the bugs listed in black from flashing to Jelly Bean?
And lastly, can I use the Ace 2 GT-I8160 method of getting Kitkat for my ace 2x?

netnoob said:
So is the Kitkat update still being worked on or not? You say its being worked on in the first post but later say he's stopped. Also, are the bugs listed in black from flashing to Jelly Bean?
And lastly, can I use the Ace 2 GT-I8160 method of getting Kitkat for my ace 2x?
Click to expand...
Click to collapse
You're using an Ace 2 GT-I8160? This thread is for Galaxy Ace II X GT-S7560M. The two devices are completely different. The only reason that us Ace II X users use the Ace 2 forums is because the names are somewhat similiar. However, don't let that similiarity ruse you.

any kitkat?
Any chance that kitkat makes its way to this phone?...
If it were too... which stock should i load to my phone to be compatible with that?
Which custom rom on jb is the least buggy right now?
Thanks!

[ROM] *UNOFFICIAL* ShinyROM [AOSP 4.4.2] KOT49H (No mods, completely stock!)

ORIGINAL CREDIT TO BALDWINGUY77 OVER ON ROOTZWIKI. CHECK OUT THE ORIGINALi: http://rootzwiki.com/topic/36706-ro...a-like-stock-android-442-kot49h/#entry1031982
I'm only port to maguro.
Is a port from original rom no have base maguro only changes for use GSM networks
This ROM is Android Kitkat 4.4.2, build KOT49H. The ROM is built directly from source, that is, the Android source code published by Google available for download to all of us developers. The reason I say the ROM is "OTA-like" is because I make VERY few modifications to it, aside from the things that it takes to get the ROM working. I'll go into detail about those things below, but basically I just want the ROM to make your phone feel stable and shiny and new as if it has just received a new OTA update. That being said, it's clear that the landscape of Nexus devices is changing as new ones are released. Therefore, the other primary goal of this ROM is to keep our Galaxy Nexus as close to the modern Nexus design as possible. This means that I will also add in features that will still be stock, but will also make our phones as close to a current Nexus as possible.
As for how I handle the forum side of things, I'm always open to comments, questions, suggestions, requests, etc. I know that most of those things will often be in the form of criticism, but it's okay, I think I can handle it That being said, I do also have a life and am a college student, so I may not get to come on here ALL the time. I will check back as frequently as possible, and I'm hoping that you guys will help each other out as much as possible! Keep it friendly! So now for the details...
Features
Stock Android 4.4.2, build KOT49H
Source (AOSP) built kernel (boot.img)
(De)Odexed
Easily rootable (see information below)
G-Apps (GMail, Play Store, etc.) included in build along with Nexus apps
Stock browser replaced with Google Chrome
Shiny restart options - access them by holding down the power button and then long pressing on "Power Off"
All the crazy Google proprietary app stuff has been taken care off
Updated frequently
Everything works!
So what do I mean when I say "Everything works!"?
I'm sure by now you all know that when someone says that, it usually ends up not being true. This ROM is not an exception to that rule, but I can say that I've tested most of the things that would be expected to work in stock Android, such as...
WiFi Tethering (no subscription check)
Bluetooth streaming
Google account sign-in and auto-restore of apps and settings
Google Wallet
Location Services (pretty fast GPS lock in my area also)
Believe it or not, December is still a month!
Photosphere
Android beam
Photo editing with the new filters
Email
Exchange support
Like I said, the normal stuff (data, voice, hardware acceleration, etc.)
More things that aren't important enough to mention here - check out the changelog for a more comprehensive list
Installation Instructions (VERY IMPORTANT - Note: I use recovery-clockwork-touch-6.0.4.3-maguro)
ROM
pbls said:
By the way TWRP works with this rom.
Click to expand...
Click to collapse
1. Download the latest version of the ROM from the download post. (Also download any other files you will need to install, such as Chainfire's Superuser Root ZIP, the radios installation ZIP, the bootloader installation ZIP, etc.)
2. Put the file(s) you downloaded in step 1 on your phone's internal storage (sdcard).
3. Turn off your phone.
4. Boot into the bootloader of the phone by holding down both volume buttons and the power button simultaneously until you feel a vibration and see a large arrow that says "Start".
5. Use the volume keys to change the arrow until it says "Recovery," then press the power button to boot into recovery.
6. Because of differences in recovery types, I will make the following steps rather generic.
7. Wipe cache.
8. Wipe dalvik cache.
9. If you want to be 100% sure there are no problems, wipe data. If you are coming from another ROM or Android version, wipe data. If you do not wipe data and something goes wrong, repeat this process but wipe data - this step is not necessary if you are simply upgrading.
10. Flash the ROM
OPTIONALS:
11. Root: If you are rooting, flash Chainfire's SuperSU ZIP file - this step is not necessary if you were rooted on the previous build and are simply upgrading.
12. Mod's: If you like any mod you can install zip now
13. Change kernel: U can change aosp stock kernel. Tiny Kernel, Fancy Kernel, Dirty V, Franco Kernel, Mpokang kernel.
14. Reboot your phone, and enjoy!
Toro XDA Thread: http://forum.xda-developers.com/showthread.php?t=2508073

CHANGELOG:
1/12/2014
First Release port on base aospa beta3
1/20/2014
Port 1:1 toro build
Fix panorama preview
2/04/2014
Fix root troubles
DOWNLOADS:
LAST VERSIÓN:
ROM 02/04/14
Mega
Link 1 Google Drive
Link 2 Google Drive
OLD VERSIONS :
ROM 1/20/14
Mega
ROM 1/12/14
Google Drive
Mega
MODS:
Universal Mod's:
AOSP BROWSER: Change Chrome for STOCK browser.
AOSP Mms.apk: Install on system aosp mesaje apk
DPS Manager: Add Cyanongen DPS Manager.
MOD's to 012014:
Return to Stock:
BACK TO STOCK Returns you to the stock version of the ROM by removing SystemUI and framework-res mods.
Return to ShinyROM Kernel: Returns to Original Shiny Kernel
Tweaks & Look:
36 DPI Nav Bar: Reduces Nav Bar to 36 dpi
Battery Percent Grey
More mod in this url: http://shinyrom.goofball.org/?dir=012014/toro/Mods/inmanster

No GApps "Add-on" Zip
Some people don't like the way ShinyROM includes its own GApps. Flash this zip directly after the ROM and it will strip out most of the included GApps so that you may use the preferred GApps of your choosing. This will leave the core GApps (Store, Services, etc.) as well any others required for basic functionality (Keyboard, Camera, Launcher, Dialer, etc.) since there are none of the AOSP counterparts included.
[ Attachment removed - new version up in Official thread ! ]

This is something what I wanted. Love stock(ish) ROMs.
Sent from my Galaxy Nexus using Tapatalk

Drive disabled here, please upload to Dropbox (direct link support) or any other mirror Thanks.

Could someone upload to XDA or Mega?

That's what we have been waiting for! Although Google left us, I wanted our device to be up to date with "stock" ROM. Thanks!
Sent from my Galaxy Nexus using Tapatalk

can someone re-upload somewhere? too many users downloaded from google drive and we're out

If you like, I will upload to my server. Gimme a short feedback.
Best regards, PlusOne.
Sent from my Galaxy Nexus using XDA Premium 4 mobile app

can i install the rom by twrp or cwm is obligatory?

I can't download becouse there are too many users trying to get it... please upload on other server

Sorry, you can not view or download this file at this time.
There are too many users who visualized or downloaded this file recently. Try again later access. If the file you are trying to access is particularly large or is being shared by many people, you may tarry up to 24 hours to view or download. If after 24 hours you still can not access the file, please contact your domain administrator.

So did anyone actually manage to download and flash this yet? I'm without Wi-Fi for a couple of days.

osm0sis said:
So did anyone actually manage to download and flash this yet? I'm without Wi-Fi for a couple of days.
Click to expand...
Click to collapse
Not so far... Tried a few minutes ago. Still nothing.
I guess those who ended download tickes flew away :laugh:
It would be great if someone could upload it to Mega.. Thanks!!
(Tried to add it to my Drive too but it keeps giving me problems...)

New link to mega in second post :good:

I liked the ROM, simple and quick. Thank you.

Fantastic job....
Inviato dal mio Nexus 5

Shiny rom,blazzing fast,going to test battery for a few days and post feedback.Thank you sir.By the way TWRP works with this rom.

Finally ROM based on stock without modifications. Will try this
Anyone tried this ROM with mpokang kernel?

@Sesme
osm0sis said:
Amazing! Been hoping someone would do this for awhile! Really looking forward to trying it out!
It mentions SystemUI and framework-res mods over stock; what are they, like completing the white KitKat look? (I hope so!)
Click to expand...
Click to collapse