I AM HAPPY TO PRESENT YOU WITH A REAL WORKING X-REALITY ENGINE FOR XPERIA DEVICES..
{This mod is for pre 4.4.2 (any firmware version lower than 14.3.A.0.681) only. As Sony's KITKAT is much more sweeter now. yes they have removed the restriction of "no X-REALITY / BRAVIA ENGINE for unlocked boot-loaders" from KITKAT. ( Kissess Sony.. )
So from now, U will have to flash this mod, only if you are on pre-KITKAT firmwares. And please dont mess up with kitkat firmwares.}
GUYS.
Many of you have unlocked your xperia's bootloaders by now for your custom rom love..(i had it done on second day after purchase of my zx1, and its only a week old now, thanks to TA BACKUP).
One of the sad thing u will ever realize after bootloader unlock will be a non functioning X-Reality/Bravia engine and it is due to the drm protection being lost, though the files are there for its working.
So the question is can it be recovered if we patch the drm check??? the ans is yes!
That's why i promise you this mod will work.
This mod contains files for X-Realty engine BASED ON XZ1 14.2.A.1.136 FIRMWARE and patch files to patch the DRM check... Also you will figure out that this X-Reality engine will have some difference in colour saturation level than what you find in other mods or previous BRAVIA/X-Reality engines. I personally prefer it becoz it does not hurt eyes that much, and have good balance with colour-contrast ratio.
What you will need
1. An xperia device ( checked it on xperia z and z1 ) with stock or stock based rom ( dont know about custom roms or other devices, but it wont hurt you to give a try)
2. Unlocked bootloader ( well, you wont be needing this if u r on locked bootloader, although u can use it in lb too)
3. CWM/TWRP recovery or any recovery you use like phills advanced touch recovery.
4. Patience ( will tell you later, why you need it!)
Steps
1. Reboot into your recovery
2. Backup your system ( not needed exactly, but its always good to keep a backup, in case the sky falls!)
3. Flash the zip.
4. Reboot and enjoy the X-Reality display
Now the patience part....AKA checking if its working
1. Go to SETTINGS>DISPLAY and turn on X-Reality/Bravia engine if it is not turned on
2. Collect some brightly coloured pic from somewhere on web, or from your collection on your pc( recomended to find some HDR pics, having good sunlight/brightness and a verity of colours like red's ,blue's, yellow's, green's etc. and transfer to your phone/sd.
3. open album(Sony album preferred) and locate the pics.(full screen pics on landscape are pretty good to see the effect).
4. If its a high resolution pic, it will take a second or two to load the pic( u will see the pic edges will smooth out when it loads). Give it another second or two to make the X-Reality effect to load.(this time you will see the colours getting more saturated, and the contrast increasing)
5. Thats all.. Enjoy the X-Reality engine on your movies and photos.
I take no credits, as this is not my work, this is the work of Sony Engineers, and the patch files , which i use in this package is obtained from XDA itself, and is the result of hard work of some XDA member ( Sorry i forgot whom e's for mentioning his name, as i got it before long time).
I just took all of them together, from XDA and newest XZ1's firmware, combined and checked if every thing is working. And sharing it with you.
I have analysed the "SwiqiMasterReset.apk" which is used to load the x-reality engine. And i found out this( well its not new,nor what you people have heard of).
If somebody who have a problem with the working of this mod, please add these lines to your build.prop.
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
ro.service.swiqi3.supported=true
persist.service.swiqi3.enable=1
Thats really needed for the working of bravia or x-reality. These lines are normally found in stock or stock based roms unless your rom dev have removed it.
You may hit the THANKS button for me if you like it.
Hi!
Would definitely check this out!
Anyone confirm that to work ?
Trying right now!
Thx Bruh!
-Edit!
Flashed it, but i don`t really recognize any difference, it loads its sharpness of the picture but i cant see any colours or contrast improvements or so after next couple sec, Either i`m to blind to see that, it loads to fast or it doesnt work for me ^^ Anyway Thanx
works also Bionz engine on z1?
Very nice !
Will this also work on Xperia Z Ultra ?
Nice!! how about bionz??
People... Test it and then ask...
Wysłane z mojego C6903 przy użyciu Tapatalka
About xreality.. It works 100% sure. By the way bionz is a chip, which is sony's custom image processor chip, they use it in many cameras. And i dont think its a piece of software unlike xreality or bravia engine. Yap both of them are just softwares. And nothing else.
So if u loose bionz, u probably dont have camera working. And there are rumours like it wont work if u unlock bootloader ( yap its true if u havent updated zx1 to 4.3 before unlocking bootloader, sony themselves cleared it in there bootloader unlock Code request page).
If some doesnt see any xreality enhancement, sorry but i cant help u in seeing it. No offence, but some already told that they cant even notice the diff in turning it on and off in sony offical firmware,with locked boot!!!! Lol what can i do to make them belive!
Sent from my C6903 using XDA Premium 4 mobile app
Yap i hope it will work on ultra too.. Though the files are from z1. U can always give a try. Nothing will hurt
Sent from my C6903 using XDA Premium 4 mobile app
showlyshah said:
About xreality.. It works 100% sure. By the way bionz is a chip, which is sony's custom image processor chip, they use it in many cameras. And i dont think its a piece of software unlike xreality or bravia engine. Yap both of them are just softwares. And nothing else.
So if u loose bionz, u probably dont have camera working. And there are rumours like it wont work if u unlock bootloader ( yap its true if u havent updated zx1 to 4.3 before unlocking bootloader, sony themselves cleared it in there bootloader unlock Code request page).
If some doesnt see any xreality enhancement, sorry but i cant help u in seeing it. No offence, but some already told that they cant even notice the diff in turning it on and off in sony offical firmware,with locked boot!!!! Lol what can i do to make them belive!
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah but people still said function of bionz will be gone after unlocking bootloader on android 4.3
I think sony prevent the camera from breaking by enable image process by regular cpu, like any other xperia devices
is it??
Looks like this is for deodex ROM, am I right?
Sent from my C6903 using Tapatalk
working well on Z Ultra
Thanks mate
so wait, this is a fix for all of us who unlocked bootloader but didnt do a TA backup (so we lost our DRM keys forever) ?
even if i dont have TA backup, I can get x-reality to work again? if so, that is cool
anyway to do this for camera too? my camera quality has gone to s*hit ever since i unlocked bootloader (or maybe its because i use iHackers 2.1 rom, dont know)
KWOKSFUNG said:
Yeah but people still said function of bionz will be gone after unlocking bootloader on android 4.3
I think sony prevent the camera from breaking by enable image process by regular cpu, like any other xperia devices
is it??
Click to expand...
Click to collapse
does it? thats one new knowledge for me, i have unlocked bootloader, after updating 4.3. Does any one confirm it yet? well sony haven't said that, ..... oh wait .. i will relock my boot now with TA(and post any result). I noticed a colour change in superior auto mode when under lowlight condition. on 4.2, it seems much better, but on 4.3 it seems like having a purple tint in same mode. let me check.
omegahanggara said:
Looks like this is for deodex ROM, am I right?
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
ya, for deodex, well u can use in odex rom too, i am using it in odex rom, just delete the .odex files too for the apks and jar files from system and framework folders, and then copy. it will work.
MEGAX91 said:
working well on Z Ultra
Thanks mate
Click to expand...
Click to collapse
cheers bro..
Furma said:
so wait, this is a fix for all of us who unlocked bootloader but didnt do a TA backup (so we lost our DRM keys forever) ?
even if i dont have TA backup, I can get x-reality to work again? if so, that is cool
anyway to do this for camera too? my camera quality has gone to s*hit ever since i unlocked bootloader (or maybe its because i use iHackers 2.1 rom, dont know)
Click to expand...
Click to collapse
the xreality will work, and about the drm, i dont think so, coz the patch is probably from an old model sony phone. and may be the keys will be different, but bro.. seriously i cant check.. coz i have a working camera.. i unlocked after update!!!. also about your camera.. well pls ask it in your rom's thread. or may be some day we XDA'ns will find a solution for those who lost the cam.
I can make odexed version from yours tho. Anyway, big thanks for your work!
Sent from my C6903 using Tapatalk
another sony crap
KWOKSFUNG said:
Yeah but people still said function of bionz will be gone after unlocking bootloader on android 4.3
I think sony prevent the camera from breaking by enable image process by regular cpu, like any other xperia devices
is it??
Click to expand...
Click to collapse
check this thread mate.. your doubt seems legible...
http://forum.xda-developers.com/showthread.php?p=50220234
download & try it
THX a lot
:laugh:
Flashed the zip, now upon every reboot I get an error credential manager... has stopped working
Sent from my C6903 using XDA Premium 4 mobile app
m666p said:
Flashed the zip, now upon every reboot I get an error credential manager... has stopped working
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
move it from \system\app\ to \system\, reboot into recovery and vipe dalvik+cache, boot system, check no errors, move application from \system\ to \system\app, reboot, check
Thank you Desperanto86, no error and the mod works for me
Gesendet von meinem C6903
---------- Post added at 05:01 PM ---------- Previous post was at 04:48 PM ----------
But since mod, my album loads pic's very slowly or nothing :/
Gesendet von meinem C6903
I dont have that prob. The album loads smooth
Sent from my C6903 using XDA Premium 4 mobile app
Related
Sony Ericsson has implemented this stuff called bravia engine in their new devices that increases sharpness, contrast, etc.
They have managed to port that to the x10. Bravia engine is completely software based so is there a possibility we can port it to our desire?
The latest version of Tabasco's Silky ROM has the Bravia engine included. No idea how it works, or how to port it to other ROMs but at least it is here on the Desire...that's a start!
fisha21 said:
The latest version of Tabasco's Silky ROM has the Bravia engine included. No idea how it works, or how to port it to other ROMs but at least it is here on the Desire...that's a start!
Click to expand...
Click to collapse
A developer over at the HD2 forums ported them first. He also posted the files, and he says they work on all sense roms.
Link
Thanks for the link. Although reading that thread, it seems doubtful whether this has actually been successfully ported?
But will we notice the difference with and without bravia engine? Does it work ONLY in gallery?
i don't think so
What is it?
Sebastian Runny have Bravia, but I'm not know how it use =((
Anybody knows how it works?
EDIT: Is it really BETTER than displays without Bravia Engine?
Sent from my HTC Desire using XDA Premium App
I saw the two files and the build.prop entries to add but I am also confused as to what exactly this will improve... I'll probably not even notice!
http://forum.xda-developers.com/showpost.php?p=18893486&postcount=9115
http://forum.xda-developers.com/attachment.php?attachmentid=766150&d=1319983492
Bravia Engine doesnt do anything but it does improve screen acurancy...
Sent from my Nexus One using Tapatalk
well i guess it is just a marketing trick...
We wont know till we compare two htc desires, one with bravia engine and one without
There are now a few roms with bravia engine, hope someone makes a flashable .zip of it. Would be nice
sebastianlow said:
We wont know till we compare two htc desires, one with bravia engine and one without
Click to expand...
Click to collapse
Sent from my HTC Desire using XDA App
I can do that if someone makrs it work with Cyanogen.
sebastianlow said:
There are now a few roms with bravia engine, hope someone makes a flashable .zip of it. Would be nice
Click to expand...
Click to collapse
bit difficult with all the build.prop's for every version of each rom..
would have to find a way to append the text in the build.prop ? or just create a flashable version for each rom
I think flashable zip for each rom would be easier
sebastianlow said:
I think flashable zip for each rom would be easier
Click to expand...
Click to collapse
Note: untested!! only for AceSMod007-3D v15, CM7 7.1.0 stable, oxygen 2.3.1 (please post and let us know if it works or not if you test)
try this?
would recommend backing up build.prop before flashing
Thanks, can u make a flashable zip for CM7? cuz the other guy claims to have 2 HTC desires and can do a comparison for us. In the meantime i will try to flash the zip file and see if theres is any differences. Thanks so much
Also Michaelm007's Runnymede007 v3 has the bravia engine. I have noticed that truly the look and sharpness has changed since he included it into his rom.
U saw the sharpness increase WHERE? The entire UI or JUST the gallery
i have unlock bootloader and rooted my xperia s , anbd i install a lot of roms and i change between kernels a lot which means i have a lot of different versions of CWM , i found a folder in sdcard /clockworkmod called blobs , the folder contained about 2 gb and about 4650 files , are they important , can i delete them ? i can't ask the devs of cwm because they don't have it officially supported by sony xperia s , so please answer my question
elias234 said:
i have unlock bootloader and rooted my xperia s , anbd i install a lot of roms and i change between kernels a lot which means i have a lot of different versions of CWM , i found a folder in sdcard /clockworkmod called blobs , the folder contained about 2 gb and about 4650 files , are they important , can i delete them ? i can't ask the devs of cwm because they don't have it officially supported by sony xperia s , so please answer my question
Click to expand...
Click to collapse
found this with a qhick google:
The blobs folder contains portions of your CWM backups.
When you make a new backup, CWM checks the blobs folder to see what has changed between backups, since it's likely that a lot has remained the same.
This can actually save a lot of space, and make backups happen faster.
T-mo G2 + CM Nightlies
Nexus 7 + ParanoidAndroid
Twitter: ffff00
elias234 said:
i have unlock bootloader and rooted my xperia s , anbd i install a lot of roms and i change between kernels a lot which means i have a lot of different versions of CWM , i found a folder in sdcard /clockworkmod called blobs , the folder contained about 2 gb and about 4650 files , are they important , can i delete them ? i can't ask the devs of cwm because they don't have it officially supported by sony xperia s , so please answer my question
Click to expand...
Click to collapse
Can u please provide me knowledge how to update my firmware,unlock bootloader-which kernel to install nd rom,how to install cwm
Sent from my LT26i using xda premium
RISHI RAJ said:
Can u please provide me knowledge how to update my firmware,unlock bootloader-which kernel to install nd rom,how to install cwm
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
I asume you also have an Xperia S, you can unlock its bootloader by going to: unlockbootloader.sonymobile.c om./instructions (without the space between c and om )
Because I have a Xperia S myself, the only MOD I have experience with is CyanogenMod. It is a very good one in my eye's here is a link on how to download and install it on your Xperia: /androidlegend.c om/xperia-s-update-to-android-4-1-jelly-bean-with-cyanogenmod-10 (without the space between c and om )
P.S. You MUST unlock your Xperia's bootloader before doing anything else with it..... If you don't understand how to do all this stuff, PLEASE do not start with this.
xJokerz said:
I asume you also have an Xperia S, you can unlock its bootloader by going to: unlockbootloader.sonymobile.c om./instructions (without the space between c and om )
Because I have a Xperia S myself, the only MOD I have experience with is CyanogenMod. It is a very good one in my eye's here is a link on how to download and install it on your Xperia: /androidlegend.c om/xperia-s-update-to-android-4-1-jelly-bean-with-cyanogenmod-10 (without the space between c and om )
P.S. You MUST unlock your Xperia's bootloader before doing anything else with it..... If you don't understand how to do all this stuff, PLEASE do not start with this.
Click to expand...
Click to collapse
Do I need to update my firmware also or is it included in the rom
Sent from my LT26i using xda premium
You will need to update your firmware
P.S. Don't forget to hit that thanks button!!!!!!!
Sent from my Xperia S using xda app-developers app
If you want CyanogenMod 10 you must update to ICS.
update to newer offical FW and unlock BL
then follow instruction on CM10 thread
info:
this is based on the XZU recovery for locked bootloaders by @Krabappel2548
This thread will stay a dev and discussion thread for further development issues and fixes!
Download link can be found here: XZU recovery for locked bootloaders
THIS IS INTENDED FOR LOCKED BOOTLOADER DEVICES! But works on Unlocked bootloader too
THIS IS STILL IN DEVELOPMENT STAGE!
DO NOT EXPECT IT TO WORK PROBLEM FREE!
requirements:
rooted Xperia Z1
how to enter recovery:
when you see the Sony bootlogo and when device vibrates/leds light up u can use the entry keys to enter the corresponding recovery
VOLUME UP -> CWM
VOLUME DOWN -> TWRP
what works:
BOTH CWM 6.0.3.6 and TWRP 2.6.3.0 work
you can enter both recoveries and flash small files
what doesnt work:
in this particular version of CWM, adb doesnt work; it will be fixed later.. for debugging use TWRP
Shoudl be fixed:
TWRP and CWM both can destroy /cache and /system when trying to format it. Restoring your phone using an FTF is the only option left if that happens. You can however try to not format but use rm -rf instead in TWRP (TIC BOX!!), which will do for now.
regards,
Krabappel2548,
[NUT]
DooMLoRD
Last edit by Krabappel2548 on 19-10-'13
XDA:DevDB Information
Dual Recovery for Xperia Z1 (LOCKED BOOTLOADERS), a Tool/Utility for the Sony Xperia Z1
Contributors
DooMLoRD, [NUT], krabappel2548
Version Information
Status: Testing
Current Beta Version: 0.3
Beta Release Date: 2013-10-15
Created 2013-09-23
Last Updated 2013-10-19
Reserved
For anyone who does not own a Z1 (like me) and wants to search through the init actions.
Look also L2 Error detected! in 1089 Line. Usb don't work right and i think because we can't write in memory stack stack(0xe4859e70 to 0xe4859eb8) for lock bootloader. Problem it's in arch / arm / mach-msm but i don't find where!
As DooMLoRD's OP somehow does not fire the mention system... repeat for function
@Kali- @Bin4ry we need your help guys!
Oh now I got marked. I'll take a look at the weekend I don't have time Today sorry!
But just for me to know, ist that selfcompiled or a copy n paste version with a unpacked -> repacked ramdisk?
Have you checked against my posted recovery in Z Ultra forums? I can remember there was a similar problem on the locked bl recovery, you guys really seem to screw it somehow.
Also can i get a gdrive link to the files? Then I can grab it over my different systems more easy
Gesendet von meinem C6903 mit Tapatalk 4
Bin4ry said:
Oh now I got marked. I'll take a look at the weekend I don't have time Today sorry!
But just for me to know, ist that selfcompiled or a copy n paste version with a unpacked -> repacked ramdisk?
Have you checked against my posted recovery in Z Ultra forums? I can remember there was a similar problem on the locked bl recovery, you guys really seem to screw it somehow.
Also can i get a gdrive link to the files? Then I can grab it over my different systems more easy
Gesendet von meinem C6903 mit Tapatalk 4
Click to expand...
Click to collapse
It was a self-compiled version by @DooMLoRD, with a ramdisk slightly modified to get it to work for the Z1. What did you do to get it to work on the ZU? @krabappel2548 tried and failed there too...
EDIT: Just to be clear: it's not that the recovery does not work, it does, it's the kernel which triggers a reboot after 40 seconds because it seems to be unable to initialize the modem.
Bin4ry said:
Oh now I got marked. I'll take a look at the weekend I don't have time Today sorry!
But just for me to know, ist that selfcompiled or a copy n paste version with a unpacked -> repacked ramdisk?
Have you checked against my posted recovery in Z Ultra forums? I can remember there was a similar problem on the locked bl recovery, you guys really seem to screw it somehow.
Also can i get a gdrive link to the files? Then I can grab it over my different systems more easy
Gesendet von meinem C6903 mit Tapatalk 4
Click to expand...
Click to collapse
the boot hijack scripts, chargemon, are based on the ones for Xperia Z by @[NUT], with the necessary modifications, if any, for Xperia Z1
the ramdisks for the recoveries are using the same CPIO as the ones for unlocked bootloader...
recovery works well on unlocked bootloader with recovery integrated in kernel ramdisk...
will send u link over gtalk
did u post recovery for LOCKED bootloaders for Z Ultra?
Ok i did some first tests!
My own recovery works (see cm boot.img !). But this one does not work when ramdisk-recovery is integrated into your dualboot script!
So it is definetly a problem with the services from the "host" system. The ramdisks which get extracted also work fine when integrated into cm boot.img!
So wild guess here: You try to stop all services from host system but it seems not to work, since you dont really need anything running for recovery, but some of the host services dont want to stop here and waiting for the system to bootup. SOMETHING seems to reboot it then when nothing is happening
Need to see deeper whats happening, its quite a funny problem i think
Regards
I came to the same conclusion, but I had to give up as I had no idea what services could have been responsible
It might be the RIL service as it slingshots a lot of the radio/modem functionality... But I'm really not too sure...
Sent from my C6603 using xda app-developers app
Deleted
original ramdisk and the files from /system/etc are now in post 3 for anyone without a Z1 to check them.
Bin4ry said:
Ok i did some first tests!
My own recovery works (see cm boot.img !). But this one does not work when ramdisk-recovery is integrated into your dualboot script!
So it is definetly a problem with the services from the "host" system. The ramdisks which get extracted also work fine when integrated into cm boot.img!
So wild guess here: You try to stop all services from host system but it seems not to work, since you dont really need anything running for recovery, but some of the host services dont want to stop here and waiting for the system to bootup. SOMETHING seems to reboot it then when nothing is happening
Need to see deeper whats happening, its quite a funny problem i think
Regards
Click to expand...
Click to collapse
Did you find anything useful yet?
I've been wandering around in the files again myself, i've checked the qcom modem init already but i rechecked it, it seems that before chargemon is started, it already initialized a lot of the radio/modem hardware... it seems that at least one service is responsible for the communications layer between the kernel and modem, but I have been unable to determine which one... seeing the 40 second timeout before a reboot occurs it probably accounts for the service needing some time to start up.
Since kernel have initiated the modem, is it possible to write a procedure to set smem_get_entry flag. most likely to assign flag one to it.. New to android development..When i program a micro controller..we will be checking a flag in modem to see if it is initiated.. or sometimes.. i assigns a variable or memory address...so instruction will check that location for status rather than checking modem flag...as it takes more cycles...so i think this may be clearing some flags or memory or variable....
I did not had time yet to continue working but boyhood you guys should be correct. I am just thinking of the easiest way to fix it. Give me some more days please
Gesendet von meinem C6833 mit Tapatalk 4
Bin4ry said:
I did not had time yet to continue working but boyhood you guys should be correct. I am just thinking of the easiest way to fix it. Give me some more days please
Gesendet von meinem C6833 mit Tapatalk 4
Click to expand...
Click to collapse
I've had a chat about it with Dees Troy from TWRP about it, he suggested RIL as a possible culprit, or maybe watchdogd...
I don't have a z1 so I'm unable to test it on my own...
Sent from my C6603 using xda app-developers app
[NUT] said:
I've had a chat about it with Dees Troy from TWRP about it, he suggested RIL as a possible culprit, or maybe watchdogd...
I don't have a z1 so I'm unable to test it on my own...
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
For watchdog to reset an unexpected condition should occur.. for that something else have to go wrong...
and not sure- Radio Interface Layer is it not part of baseband?
jos_031 said:
For watchdog to reset an unexpected condition should occur.. for that something else have to go wrong...
and not sure- Radio Interface Layer is it not part of baseband?
Click to expand...
Click to collapse
Yes, it is: so it's tied in with the modem hardware...
Where do I download that recovery??
Jacob_Bentzen said:
Where do I download that recovery??
Click to expand...
Click to collapse
It's on the download tab in the project bar
Sent from my C6603 using xda app-developers app
I make working Background Defocus app from Xperia Z1s
Download
Push to /system/app with right permission and REBOOT
working 100% , just intall it like normal apk without reboot and it works without a problem
Having fun with sister ZL Sony Camera Defocus Mode. It is cool but need steady object and hand not shake as well. Just install as normal apk, no need root.
not woking 90% of the time
first of all not installing on my deodexed rooted zl on fw .569, so i pushed it as a system app but still most of the time it shows 'unable to blur background' message after processing a picture. Am i missing something?
ghost_razr said:
first of all not installing on my deodexed rooted zl on fw .569, so i pushed it as a system app but still most of the time it shows 'unable to blur background' message after processing a picture. Am i missing something?
Click to expand...
Click to collapse
You need to snap closely and hold steady as it snap twice. The two snap must be equal else it will fail blurring.
No need to push, it can direct install as normal apps.
I see that the maximum resolution is 9mp and there is no flasglight.
Is it possible to have this app working on cm10?
Thanks.
Sent from my C6503 using xda app-developers app
Andrewtst said:
You need to snap closely and hold steady as it snap twice. The two snap must be equal else it will fail blurring.
No need to push, it can direct install as normal apps.
Click to expand...
Click to collapse
i tried installing it but it always says 'application not installed'...
ghost_razr said:
i tried installing it but it always says 'application not installed'...
Click to expand...
Click to collapse
Sorry I actually download from Xperiablog as I seen there 1st and it working fine installing as normal, I success install at my Xperia Tablet Z and my sister Xperia ZL. Both device is stock never root. That one no need root.
Make sure you are in 4.3 ROM.
http://www.xperiablog.net/2014/01/1...pp-available-to-download-on-xperia-z-devices/
Andrewtst said:
Sorry I actually download from Xperiablog as I seen there 1st and it working fine installing as normal, I success install at my Xperia Tablet Z and my sister Xperia ZL. Both device is stock never root. That one no need root.
Make sure you are in 4.3 ROM.
http://www.xperiablog.net/2014/01/1...pp-available-to-download-on-xperia-z-devices/
Click to expand...
Click to collapse
Well as i checked on xperiablog a lot of people are facing the same issue, still thanks a lot man!!!
After Focus
Use This App Guys.. this hassle free app gives you perfect results.. that too without any special requirement..
works fine on rooted\non rooted.. odexed\deodexed .. infact everything
here is the direct download link ..
: http://www61.zippyshare.com/d/77680152/837462/AfterFocus Pro v1.3.3.apk
____
do hit thanks if i helped
https://play.google.com/store/apps/details?id=com.motionone.afterfocus&hl=en
if this is it then no
the point of this thread is the app that make use of the sony social camera ..this app does not . :\
is it working on samsung N9005?
would it work on samsung note 3 N9005?
Upgrading to 4.3 already improved gaming performance, but it is still not enough. Considering Chainfire3D is not compatible with 4.3+, there must be other options to increase gaming performance such as decreasing texture quality.
Decreasing the resolution does not have much effect as Xperia M is already running on a low resolution. I lowered it slightly, but I barely get any noticable increase.
Recently, Dragon Quest 8 has been ported to Android and I am using it as my Gaming Performance measurement.
It runs well and very playable, but it still lags now and then during sequences and I want to completely get rid of that. The graphics of the game look amazing (considering its a PS2 game on Android), but I'd be comfortable with smoother gameplay instead of great graphics.
I found some tweaks such as Medusa, but as mentioned my phone has a Locked BootLoader and it cannot be unlocked. I already disabled all animation effects in Developer Settings.
I personally use medusa and reincarnation engine at the same time and my phone runs like a damn cheetah.oh and you don't need an unlocked bootloader to install these mods, all you have to have is root, busybox, and init.d support. And then download the mods amd place the files in their appropriate folders and set the correct permissions to each file. You don't need CWM. this method actually works for a lot of mods, you can try it out if you wish. Good luck
Yea.medusa script is good.best battery life ever and speed is amazing
Sent from my C1905 using XDA Premium 4 mobile app
Good to know that Medusa doesnt require CWM. I'll try it out later.
Are there any other tweaks and will Medusa interfere with them?
-FliP- said:
Good to know that Medusa doesnt require CWM. I'll try it out later.
Are there any other tweaks and will Medusa interfere with them?
Click to expand...
Click to collapse
It is okay .you should try medusa and reincarnation .
Any suggestions on how to install them? Since the official post says it requires CWM.
Which files and where should I move them?
-FliP- said:
Any suggestions on how to install them? Since the official post says it requires CWM.
Which files and where should I move them?
Click to expand...
Click to collapse
You mean reincarnation ? I used Reincarnation lately but it seems that Medusa is better , So you should only use Medusa .
extract all files then move it to /system then change permission CHECK ALL BOXES after you change that permission move them to /system/etc/int.d paste them there .then reboot .
Oh btw you need busybox and int .d support .
Farsiris said:
You mean reincarnation ? I used Reincarnation lately but it seems that Medusa is better , So you should only use Medusa .
extract all files then move it to /system then change permission CHECK ALL BOXES after you change that permission move them to /system/etc/int.d paste them there .then reboot .
Oh btw you need busybox and int .d support .
Click to expand...
Click to collapse
Why should he only use medusa. Reincarnation engine and medusa do not interfere with each other soyou can have them both installed.
paper13579 said:
Why should he only use medusa. Reincarnation engine and medusa do not interfere with each other soyou can have them both installed.
Click to expand...
Click to collapse
Then tell him how he can use Reincarnation in locked bootloader .as if you know what permission to use !
root jb4.3
how to root for jb4.3...
.have tried several mehods but unsuccesfull
plzz give stepwise instructions
nileshpandey84 said:
how to root for jb4.3...
.have tried several mehods but unsuccesfull
plzz give stepwise instructions
Click to expand...
Click to collapse
TowelRoot and apply Rootfix or the long, but my preferred way:
-Flash stock 4.1.2 using FlashTool
-Extract system.sin from 4.3.ftf file using FlashTool, you should get a system.ext4 file
-Download Nicki Root and put the system.ext4 file where the root.bat is
-Download Framaroot, install it and select SuperSU and Gandalf, run it multiple times until you have SuperSU installed on your phone
-run root.bat and follow instructions
-flash the stock 4.3 ftf but exclude System
Done
All of this can be found on xda easily, just google for 'root xperia m 4.3'.
Farsiris said:
Then tell him how he can use Reincarnation in locked bootloader .as if you know what permission to use !
Click to expand...
Click to collapse
Bro, do you think im stupid? Of course i know what permissions to use. Go to the reincarnation engine thread and go to page five. I actually made a guide for how to install the mod in locked bootloaders. It tells you what permissions to use for each file. I think u owe me an apology, lol.
Whats your problem.i just said tell him how.are you angry?hes just asking how to install.and y dont you tell him.did i said your stupid?sensitive?lol
Sent from my C1905 using XDA Premium 4 mobile app
Stop fighting.
I installed Medusa, won't install RE because it seems like more risk than gain.
Farsiris said:
Whats your problem.i just said tell him how.are you angry?hes just asking how to install.and y dont you tell him.did i said your stupid?sensitive?lol
Sent from my C1905 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
As i said, go to the reincarnation engine and open page 5, there you will see my guide for locked bootloaders.
I did that a few hours ago and couldnt find it, maybe I've overseen it.
-FliP- said:
I did that a few hours ago and couldnt find it, maybe I've overseen it.
Click to expand...
Click to collapse
Its right here: http://forum.xda-developers.com/showthread.php?p=53208244