Help Please. I can only go to Download mode - Galaxy Note II Q&A, Help & Troubleshooting

Hi guys,
Looks like my phone's in deep sh*t right now. Here's the story.
I'm coming from Criskelo rom JB 4.1.2
I wanted to try another rom and found this [ROM][4.3][NA1][9/2/14]►Xperia-Z-ized™ and i thought, this looks cool and wanted to try it out.
Managed to install the ROM perfectly, Phone works and everything but then the Wifi isn't working so i did what was told, to use the bootloader patch by Dr.Ketan. This was in the FAQ's 2-3 post below the Rom screenshots.
Extracted the file, put my phone in Download mode and connected in Odin. according to Ketan, use the PDA tab so i used that to locate the bootloader patch. started Odin, i think i was waiting for a good 5 minutes but the process still hasn't completed. still waited for 10-15 minutes more to find out that my pc is actually frozen. so i disconnected my device and restarted my pc.
F*ck now my phone is showing this. Please Help, what should i do? It's not going to Philz recovery mode but i can go to Download mode (Vol down + Home + Power). I'm definitely not downloading Kies as i know it disrupts Odin in someway.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance, I hope i can still use my Phone

Flash stock firmware and start again once up and running

pearlpassat said:
Flash stock firmware and start again once up and running
Click to expand...
Click to collapse
thanks for replying! how do i do that though, through Odin i suppose.

Yes matey, download the correct firmware from Sammobile and you are good to go.

Related

[MODEM][SPRINT ONLY!] Sprint EA24 modem.bin (limited testing)

I HAVE ONLY TESTED THIS ON MY OWN DEVICE!! I AM NOT RESPONSIBLE FOR ANY DAMAGE IT MAY CAUSE TO YOUR DEVICE OR PERSON.
You should only need this if you have broken your GPS from flashing the epic modem during a simi-stock flash. how ever it should not hurt anything to flash it to a device with a good modem, it may downgrade you to EA24 modem though if you already updated to EB28.
EXTRACT THE MODEM.BIN FROM THE ATTACHED ZIP THEN FLASH MODEM>BIN DIRECTLY, THE ATTACHED ZIP IS NOT CWM FLASHABLE
Ok so this is the modem.bin extracted from the sprinter EA24 flasher that was posted earlier and I used hiemdal to flash it. tested GPS/Data and all is well!
You should be able to flash this with Odin as well.
NOTE: GPS will turn on while in airplane mode but will NOT get a lock. Turning airplane mode off will allow a lock. This is normal even on stock device, just keep that in mind if you use the device for wifi only and in airplane mode.
this just helped me out so much i didnt think i would ever be able to downgrade and then upgrade my tablet after a bad kernel flash thanks it works great now i got the full upgrade to 2.2.1
i use Odin3 flash it. but it con't restar.....
who can help me?please
yuanjie199775366 said:
i use Odin3 flash it. but it con't restar.....
who can help me?please
Click to expand...
Click to collapse
I need more details to help you, what steps did you do and what was the results of those steps? for instance tell us what exactly you did in Odin and what the output was as well as what your tab started doing. just a side note this is for sprint tabs only.
Edit nevermind. Modem works on DJ30
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

pls help fast ..

i was using cm11 with nebula kernal,,,i have even incresed internal memory...now i wanted to go back to stock firmware like bmk3,,,i flashed it via odin but it doesnt auto reboot even it was marked in odin,,,,,i showed some errors see attachement...
when i clicked on reboot it got stuck on logo....pls help...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1) Dont put "fast" word lol... people will view and move... hehe...
2) i was having different problem, when i ticked re-boot it rebooted and than after reboot my mobile was not rooted... and after 5 mins of switching on ODIN was showing PASS...!
so it is not about re-boot, try like this... Un-tick reboot and as the process is done.. remove battery and than switch on your mobile yourself..( i mean after placing battery again )/// if this dont help.. let c any other has answer for this:angel:
datasai7755 said:
i was using cm11 with nebula kernal,,,i have even incresed internal memory...now i wanted to go back to stock firmware like bmk3,,,i flashed it via odin but it doesnt auto reboot even it was marked in odin,,,,,i showed some errors see attachement...
when i clicked on reboot it got stuck on logo....pls help...
Click to expand...
Click to collapse
As u have changed partition sizes now u have to supply PIT file in ODIN. Get the PIT and ODIN from this Post. Once the ODIN shows pass, remove battery, enter recovery, wipe data/factory reset and wipe cache.

One M9 Europe Bricked?

Hey, I wanted to revert my One M9 to stock but I f#cked up along the way, I did lock the bootloader before installing the stock Rom. I dont know what to do, I've been searching google for hours now and tried everything. ANy tips?
Can't go into recovery, I can't flash STOCK recovery because it's not unlocked anymore, cant flash stock rom via fastboot.
PS: The phone was 100% functional before I relocked the bootloader, but now I can't boot to Android. goes straight to Bootloader.
I Hope somebody can help! Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
flash a RUU. Youre on the european fw so there shouldnt be any issues. Check out flippys thread in the general section and youll be fine
Doesn't work, tried both Zip and Exe, none of them works. the exe starts flashing then quickly aborts. same with the zip.
Demyx11 said:
Doesn't work, tried both Zip and Exe, none of them works. the exe starts flashing then quickly aborts. same with the zip.
Click to expand...
Click to collapse
Then you are missing something. Read again.
Beamed in by telepathy.
Demyx11 said:
Doesn't work, tried both Zip and Exe, none of them works. the exe starts flashing then quickly aborts. same with the zip.
Click to expand...
Click to collapse
tell us what errors you got or we wont be able to help you

Phone stuck on boot screen, bootloader fails

I have my cousin's phone right here - just yesterday he tried to update to Lollipop. He was on stock TouchWiz, no root or anything of the sort and installed the update.
Now, if I try to turn on the phone, all I get is this screen and it just stays there forever:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I try to boot into the bootloader, all I get is this: https://goo.gl/photos/WBSAcHhALQ9Jmz2n9
I really don't know what I would do here - can you do anything once your bootloader is f*ed up?
If it helps, the phone's model is SM-N7505
Yes, the same issue happened with me today on Note3 Neo. I rebooted the phone and it stuck on the same place. Checked in local phone repairing shop unable to make hard reset. They are suspecting of hardware issue. What could be the coz of this?
vadsvads said:
I have my cousin's phone right here - just yesterday he tried to update to Lollipop. He was on stock TouchWiz, no root or anything of the sort and installed the update.
Now, if I try to turn on the phone, all I get is this screen and it just stays there forever:
If I try to boot into the bootloader, all I get is this: https://goo.gl/photos/WBSAcHhALQ9Jmz2n9
I really don't know what I would do here - can you do anything once your bootloader is f*ed up?
If it helps, the phone's model is SM-N7505
Click to expand...
Click to collapse
Try flashing the rom using odin
ismaadu78 said:
Try flashing the rom using odin
Click to expand...
Click to collapse
How would I do that without being able to access the bootloader? I haven't done much with Samsung devices yet, only with my HTC phones. I've heard of the name ODIN though... Are there any tutorials you can recommend?
You don't need bootloader to flash stock rom via Odin, you only need to access Download mode (vol. down+home+lock). You can look up tutorials on YT. Just type "How to flash stock Samsung rom using Odin". Hope that helps somehow

Galaxy Tab S4 stuck at boot after trying to root

Hello together
I tried to root my Samsung Galaxy Tab S4 according to https://appuals.com/how-to-root-the-samsung-galaxy-tab-s4/
There I came up to step 10 (so I flashed the two files). Now the Tablet is kind of stuck in the boot screen showing this (the same for step 8 and 10 but at step 10 i lost the ability to get to the download mode):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The only thing possible is to gamble a bit with the keys power, volume up and down to get the yellow sign in the top left showing "kernel" instead of "recovery". Otherwise if I press all three buttons together the following screen comes:
I am a complete noob in that kind of things and got no idea what to do now. There is no possibility to open the download mode to revert something, neither TWRP is shown as it should according to the Description in Link above. If possible I dont want to get anything deleted. What can I do?
EDIT: If possible I still want to root the tablet because I only see advantages in it, even I never found a good (explanatory) tutorial on it.
kind regards
alhuwile
Ok as I was very impatient and tried a bit, the blue screen is actually the "ODIN Download Mode". I reinstalled the stock firmware (loosing all data) (and rooted the device with Magisk later on) so the sm-t830 works perfectly again.
alhuwile said:
Ok as I was very impatient and tried a bit, the blue screen is actually the "ODIN Download Mode". I reinstalled the stock firmware (loosing all data) (and rooted the device with Magisk later on) so the sm-t830 works perfectly again.
Click to expand...
Click to collapse
Which guide did you follow and what firmware are you using?

Categories

Resources