Pac man Huashan 4.4 BOOTLOOP In all Huashan Devices - General PAC Discussion

DEVICE INFORMATION
C5303 SONY XPERIA HUASHAN
||AFTER WIPE SYSTEM,DALVIK,FORMAT SYSTEM,FORMAT DATA AND MEDIA , FORMAT DATA , FORMAT CACHE|| 3 TIMES
after flashing from sdcard The Pacman 4.4 For huashan released on 3/03/2014
bootloop at black screen after flashing Boot.img and the rom , i FLASHED OTHER KERNEL (To see if fix) AND FREEZE ON LOADING SCREEN
Its dont possible to use pacman 4.4 on huashan devices
ALL MY FRIENDS THAT TRIED , HAVE THE SAME PROBLEM
Sorry i cannot provide a logcat now, i dont have time
If u want to see the problem , install pacman 4.4 for You huashan device ...
Pls i need much 4.4.2 pacman ... i alredy use 4.3 for now but i like much the 4.4...
plss anyone have the solution?

Hmmm....i don't know if you follow this step but if you don't then try it...
1. Flash kernel inside the rom....
2. Boot into recovery....
3. Factory reset/full wipe....
4. wipe cache....
5. wipe dalvik cache....
6. in Mounts and Storage, format System, Data and Cache...
7. flash pac rom...
8. flash gapps....
9. boot into system....
if those above step didn't work then skip step 8 (flash rom only) then boot into system....after fully reboot then go back to recovery to flash gapps...

iPusak Gaoq™ said:
Hmmm....i don't know if you follow this step but if you don't then try it...
1. Flash kernel inside the rom....
2. Boot into recovery....
3. Factory reset/full wipe....
4. wipe cache....
5. wipe dalvik cache....
6. in Mounts and Storage, format System, Data and Cache...
7. flash pac rom...
8. flash gapps....
9. boot into system....
if those above step didn't work then skip step 8 (flash rom only) then boot into system....after fully reboot then go back to recovery to flash gapps...
Click to expand...
Click to collapse
how enter in recovery if black screen?

samuk190 said:
how enter in recovery if black screen?
Click to expand...
Click to collapse
take off the battery then put it back, turn on and go into recovery...

Related

[Q] HELP!!!

i have a unlocked & rooted galaxy nexus....i flash the rom open kang build 22 & flash the gapps 4.0.4 after i rebooted. i stocked in bootanimation & hang up & appear the google logo, always like that...cannot start.....HELP please....
Wipe and reflash the ROM then Gapps, then boot.
Did you do a full wipe. Wipe factory/data, cache partition and in the advanced menu wipe dalvik cache. Then flash rom and gapps
After you flash the rom, wipe data,cache,dalvik and flash gapps. You cant just flash rom than the 4.0.4 gapps you will get the bootloop.
i already do full wipe & still the same problem?
1. Wipe data
2. Wipe cache
3. Wipe dalvik cache
4. Flash ROM
5. Flash Gapps
6. Reboot
krisjuls said:
i already do full wipe & still the same problem?
Click to expand...
Click to collapse
In addition to doing what Eddy says, re-download the rom and Gapps.
Thanks for reply but still the same problem
charlieb620 said:
After you flash the rom, wipe data,cache,dalvik and flash gapps. You cant just flash rom than the 4.0.4 gapps you will get the bootloop.
Click to expand...
Click to collapse
I always flash like that never have a problem. Never reflash after flash. Try to flash another ROM OP to see if it was the ROM or not.
Sent from my Galaxy Nexus using Tapatalk
i install other rom foxhound ang still the same problem
i choose the show log it says rm: can't remove '/data/dalvik-cache':no such file or directory....rm:can't remove '/cache/dalvik-cache:no such file or directory.....rm: can't remove '/sd-ext/dalvik-cache': no such file or deirectory
Thanks guys for all ur reply & time.......i already done all...its ok now, i use the wugfresh to flash stock & unroot and unlock & unroot again.Again Many Thanks

[Q] Help regarding on USR[ultimatesonicromv3]

Hi, I've install USR rom after that, Im stuck on Samsung logo.. why? ive revert to stock dxle1 then try to install again.. same result.. :|
Need some advice/help. thank you very much
kagerou001 said:
Hi, I've install USR rom after that, Im stuck on Samsung logo.. why? ive revert to stock dxle1 then try to install again.. same result.. :|
Need some advice/help. thank you very much
Click to expand...
Click to collapse
did you follow installation instructions as posted? same thing happened to me until i saw that i was suppose to do a wipe data and clear cache partition from stock recovery after installing the rom from cwm
thirdzcee said:
did you follow installation instructions as posted? same thing happened to me until i saw that i was suppose to do a wipe data and clear cache partition from stock recovery after installing the rom from cwm
Click to expand...
Click to collapse
ohh.. wipe data and clear cache partition from stock recovery. then install the rom using cwm.
i followed this steps
Instructions:
-Boot to cwm
-Do full data wipe and cache
-Install rom
-Wait till succesed(dont reboot)
-Choose advanced
-Chosse reboot recovery
-Do data wipe cache again then --reboot system
-Wait till u see the android logo -turnoff phone
-Enter recovery/cwm apply updatefx{icsblack}
but i got stuck on "-Do data wipe cache again then --reboot system" part. im stuck on samsung logo
thanks bro.. ill try it again. btw. is the ROM good? how bout the battery life?
Hi there , heres the step that u all probably forgot
After instalation rom from cwm recovry , go to
Advance / boot to recovry
And do wipe data and cache and then reboot bcoz if u strigthly reboot from cwm recovry after rom instalation im sure u will get bootlop , trust me .
Wait about 10 minute if u all do that tut carefuly im sure u will enjoy the rom
kagerou001 said:
thanks bro.. ill try it again. btw. is the ROM good? how bout the battery life?
Click to expand...
Click to collapse
The rom is awesome . mine has 10-12 hour batry life with full internet . you can just use no frill app in the rom that have been add by evanlocked . And try this setting
Max : 624 mhz
Min : 312 mhz
Gavernor : interactive (optional you can explore it by ur self , use ondemand just if u wona play a game)
I / o : sio
Aply on boot : yes
And u can use the droidwall app to control ur intrnet conection coz this will degrease your data biling and btry live
Try and hit if u think this help you no need to say thanks
kagerou001 said:
ohh.. wipe data and clear cache partition from stock recovery. then install the rom using cwm.
i followed this steps
Instructions:
-Boot to cwm
-Do full data wipe and cache
-Install rom
-Wait till succesed(dont reboot)
-Choose advanced
-Chosse reboot recovery
-Do data wipe cache again then --reboot system
-Wait till u see the android logo -turnoff phone
-Enter recovery/cwm apply updatefx{icsblack}
but i got stuck on "-Do data wipe cache again then --reboot system" part. im stuck on samsung logo
thanks bro.. ill try it again. btw. is the ROM good? how bout the battery life?
Click to expand...
Click to collapse
yup,, those are the instructions i followed... yeah rom is good. scored higher in benchmark than when i was on repencis but i flashed back to repencis though... i dont know why but somehow i just prefer repencis but its still your own choice on what rom you want. i just give my opinion that i prefer repencis
edit: wait its intall rom from cwm 1st then wipe data and cache from stock recovery
kagerou001 said:
ohh.. wipe data and clear cache partition from stock recovery. then install the rom using cwm.
i followed this steps
Instructions:
-Boot to cwm
-Do full data wipe and cache
-Install rom
-Wait till succesed(dont reboot)
-Choose advanced
-Chosse reboot recovery
-Do data wipe cache again then --reboot system
-Wait till u see the android logo -turnoff phone
-Enter recovery/cwm apply updatefx{icsblack}
but i got stuck on "-Do data wipe cache again then --reboot system" part. im stuck on samsung logo
thanks bro.. ill try it again. btw. is the ROM good? how bout the battery life?
Click to expand...
Click to collapse
Android logo means when phone gets boot up and then the setup wizard is come this is the logo in your screen is android logo. Not the logo is android logo like ^samsung galaxy y young s5360^
1. Do data wipe in stock
2. Go to cwm
3. Data wipe
4. Cache wipe
5. Install rom
6. Advance in cwm
7. Go stock recovery
8. Data wipe
9. Reboot
10. Setup widget (android logo with hand direction)
11. Switchoff
12. Go cwm not stock recovery
13. Flash update
14. Dont do data wipe just reboot.
15. Done
If helpful information, press thanks.
Sent from my GT-S5360 using Xparent ICS Blue Tapatalk 2
thanks guy.. its ok now. I've flashed it successfully btw. can you guys teach me how to replace the default messaging app with Go Sms but the icon will not change. i love the usr icons.. thanks again
kagerou001 said:
thanks guy.. its ok now. I've flashed it successfully btw. can you guys teach me how to replace the default messaging app with Go Sms but the icon will not change. i love the usr icons.. thanks again
Click to expand...
Click to collapse
Check this...
http://forum.xda-developers.com/showthread.php?p=26986081
Edit: btw you cant remove the stock mms.apk otherwise you wont be able to recieve messages.. just change the icon of go sms
sent from mt GT-S5360 XpressHatred
thanks bro... Big help
thanks everyone! i hope someday ill be the one whose helping you out )
For now lets just help the op to open the thread so he can work in this awesome rom again

[Q] optimus nexus me v5 [cm7 port] boot loop problem.

since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!
1.first flash stock ddlk2
2.download the rom and flash it after :
(i) formatting system,data and cache
(ii) mounting all partitions
When done flashing,wipe data and reboot
davithdeathrider said:
since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!
Click to expand...
Click to collapse
Try this method
#1-Flash stock rom using odin
#2-Go to cwm
#3-Mount all partitions
#4-Install CyanogenMod#2 kernel
#5-Back and go to Advance then REBOOT RECOVERY
#6-You are on cwm now and the fonts are small
#7-Go to mounts and Format system,data,cache
#8-Dont press back -Mount all partitions
#9-Install zip from sd card-choose zip then choose The Rom
#10-When it is done flashing -Wipe Data - tHEN REBOOT
Do this.
1. Go to cwm recovery
2. Clear data and wipe cache
3. Go to advance :- wipe dalvik cache and battery states.
4. Go to mount & storage :- format system, data & cache.. dont format sd.
5. Then mount everything expect sd-ext.
6. Flash kernel.
7. Go to advance reboot recovery.
8. Again wipe data & cache.
9. go to advance and again wipe dalvik cache & battery states.
10. Mount everything expect sd-ext
This time you dont need to format system, data, or cache in mount.
11. Finally flash rom and reboot.
Hope it work.
Using optimus nexus me v5 on galaxy y

[Q] Help Installing Rom

I'm sorry.. i post this question because i want to know if i do something bad at installing Roms because i always had a bunch of issues, more than anyone reported in the Rom post..
I will post my way to install the Rom:
1. Install stock Rom with KDZ
2. Full Wipe/Format
3. Root
4. Unlock Bootloader
5. Copy Rom, Gapps and Kernel into SD
6. Go to Recovery and Wipe Dalvik/Cache
7. Install Rom
8. Wipe Dalvik/Cache
9. Reboot Recovery
10. Install Gapps
11. Wipe Dalvik/Cache
12. Reboot Recovery
13. Install Kernel
14. Wipe Dalvik/Cache
15. Boot as normal
D4rk_W0lf said:
I'm sorry.. i post this question because i want to know if i do something bad at installing Roms because i always had a bunch of issues, more than anyone reported in the Rom post..
I will post my way to install the Rom:
1. Install stock Rom with KDZ
2. Full Wipe/Format
3. Root
4. Unlock Bootloader
5. Copy Rom, Gapps and Kernel into SD
6. Go to Recovery and Wipe Dalvik/Cache
7. Install Rom
8. Wipe Dalvik/Cache
9. Reboot Recovery
10. Install Gapps
11. Wipe Dalvik/Cache
12. Reboot Recovery
13. Install Kernel
14. Wipe Dalvik/Cache
15. Boot as normal
Click to expand...
Click to collapse
1.Instal KDZ
2.Full wipe
3.Root
4.Unlock bootloader
5.Copy Rom, Gapps and Kernel into SD
6.FULL WIPE
7.Instal rom and kernel (gapps if need)
8.Boot normal
But you dont must instal every time KDZ
Sent from my LG-E975 using xda app-developers app
seba2121 said:
1.Instal KDZ
2.Full wipe
3.Root
4.Unlock bootloader
5.Copy Rom, Gapps and Kernel into SD
6.FULL WIPE
7.Instal rom and kernel (gapps if need)
8.Boot normal
Sent from my LG-E975 using xda app-developers app
Click to expand...
Click to collapse
I will try that tomorrow.. I hope it erases all my bugs..
One noob question... Full Wipe is Factory Reset?
Edit: Formated Everything except internal storage before install Rom, then.. something strange happened.. my backgroud menu was bugged.. like seeing another menu behind settings menu.. even in twrp i saw the original USB menu of stock..
Not just factory reset. A full wife is made in cwm recovery and it has 3 stages : factory wipe/data,wipe cache partition,wipe dalvik cache, format /system.
Sent from my EchoE'd GT-I9505/smart phones,dumb people.
kimitza said:
Not just factory reset. A full wife is made in cwm recovery and it has 3 stages : factory wipe/data,wipe cache partition,wipe dalvik cache, format /system.
Sent from my EchoE'd GT-I9505/smart phones,dumb people.
Click to expand...
Click to collapse
A full wipe doesn't mean format /system. If you format system after flashing a rom then there is no rom exists in your phone anymore. Performing a factory reset also clean cache partition too.
if you would've payed attention, he mentioned he made the wipes BEFORE flashing a custom rom. so, yes, it's recommended to perform a /system format.

[Q] Kitkat WLan Problem

Hello,
I use the ROMResurrection_Remix_KK_v5.0.9.
I install the ROM by this instructions
1.- Wipe data / factory reset (mandatory)
2.- Install the Main ROM
3.- Install gapps
4.- When you're back on recovery go to Advanced
5.- Wipe Dalvik Cache
6.- Fix Permissions
7.- Wipe Cache Partition
8.- Reboot
WLan dont work.:crying:
What is the problem?
Have u flashed kernel correctly?
motlanvamaimai said:
Have u flashed kernel correctly?
Click to expand...
Click to collapse
Yes, I flash the kernel inside the zip-archiv.
Maybe you should flash rom again together also with kernel. Read thread below, there are some solution for your problem:
http://forum.xda-developers.com/showthread.php?t=2729369&page=3
I read the thread.
All solution for my problem dont work.
Now, a new ROM is ready to download and the Problem is fixed.
Next time I'm waiting for the update

Categories

Resources