Develop Bugs

[Q] AT&T i747 android 4.3 [How to root?]

Ok what i want? Root my fresh updated i747 4.3. The problem is
1- I'm brazilian and i'm not really used with the english language, even more whn it's about technical language so my apologies if there is already a thread for this or if i'm stupidly ignorant to not know how to do this.
2.I have been reading everything i could since yesterday morning so i could upgrade afeter several hours my 4.04 android to 4.3 but i was expecting to think about root after i reach the 4.3. But i didn't know about the Knox and SELinux.
3. I have read this thread http://forum.xda-developers.com/showthread.php?t=2498233 but i don't know much about kernel and modem this part I simply do wath de developers says but wintill this point i coundn't understand afeter various re-readings if i need/should downgrade to 4.0.4 and start all over again researching about how to do all this flash thing with kernel, modem and room or i can try and update via recovery and do all the steps listed on the thread.
4This far i got mey phone all stocked.....stock rom, stock recovery stock kernel and modem.
5I have experienced rooting SII lite and Galaxy 5 but never had to face a more newwer device and so complicated or without tutorials to get rooted.
6. Sorry again for whatever.......
@edit i don't care about those security features and now i have just rooted with the Knox and SELinux. giving me an error about Super User.

Try this post!
try this post: > AT&T, Rogers, Bell, Telus Samsung Galaxy S III > AT&T Galaxy S III General > |Guide|How-To| Root & Install Custom Recovery for 4.3 Update |22 Nov 2013|
Method #1 worked for me :laugh:
Good luck!
galaxy s3 I747

irod530 said:
try this post: > AT&T, Rogers, Bell, Telus Samsung Galaxy S III > AT&T Galaxy S III General > |Guide|How-To| Root & Install Custom Recovery for 4.3 Update |22 Nov 2013|
Method #1 worked for me :laugh:
Good luck!
galaxy s3 I747
Click to expand...
Click to collapse
Thanks I wil try now!

irod530 said:
try this post: > AT&T, Rogers, Bell, Telus Samsung Galaxy S III > AT&T Galaxy S III General > |Guide|How-To| Root & Install Custom Recovery for 4.3 Update |22 Nov 2013|
Method #1 worked for me :laugh:
Click to expand...
Click to collapse
Method 1 rooted my phone but i got the super user security message error as i expected.

As I said sorry before....sorry again. I just updated the SU and it self has bloqued the Knox thanks for the help!

Farahjr said:
As I said sorry before....sorry again. I just updated the SU and it self has bloqued the Knox thanks for the help!
Click to expand...
Click to collapse
awesome!

Also just in case what version you have like for example I have a i747UCUEMJB and the UCUEMJB is the bootloader not to throw you off. Some roms even though they say 4.3/4.4 just make sure you know what your doing in terms of the bootloader just never down grade your loaders of you updated to 4.3 it can really mess the phone up.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
---------- Post added at 12:40 AM ---------- Previous post was at 12:38 AM ----------
Also this could help understand what I'm talking about http://forum.xda-developers.com/showthread.php?t=2555686
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

CYRAXDroid said:
Also just in case what version you have like for example I have a i747UCUEMJB and the UCUEMJB is the bootloader not to throw you off. Some roms even though they say 4.3/4.4 just make sure you know what your doing in terms of the bootloader just never down grade your loaders of you updated to 4.3 it can really mess the phone up.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
---------- Post added at 12:40 AM ---------- Previous post was at 12:38 AM ----------
Also this could help understand what I'm talking about http://forum.xda-developers.com/showthread.php?t=2555686
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Really thanks,
I don't know much about the loaders but right now i'm gonna put it back on the stock rom 4.0.4 as says on the tutorial i followed above. Is there any problem?

Farahjr said:
Really thanks,
I don't know much about the loaders but right now i'm gonna put it back on the stock rom 4.0.4 as says on the tutorial i followed above. Is there any problem?
Click to expand...
Click to collapse
Wait did you already update to 4.3? If so then don't try to downgrade your phone will get bricked.
Sent from my SGH-I747M using Tapatalk

Florad77 said:
Wait did you already update to 4.3? If so then don't try to downgrade your phone will get bricked.
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
Sorry i tried to edit the last post but as a newbie on the forum i can't spam so I forgot editing again!!!!
I already noticed in one of the links mentioned on this thread that i can't downgrade.
Really sad.
Thanks to you all!

★ [Rom][N900VVRUBMJE][4.3] Stock Root Deodex [12/23/13]★

This is a Stock Root Flashable Version Of the newest JellyBean 4.3 N900VVRUBMJE
Requirements: This Build is Compatible with both the Developer Edition and Retail Verizon Note 3
We Got an OTA Yay!!!
Features:
Rooted
insecure boot.img(for DevEditions)
BusyBox
Zipaligned
Deodexed/Odex
Init.d support
Bash
Sqlite3
Nano
adb as root(for DevEditions)
Removed Knox Apks
SysRW/SysRO
DeOdex Download: http://www.androidfilehost.com/?fid=23269279319198553
md5: e23eb50cf24d16c5acf228ea91ade0c8
Disclaimer: no apks have been edited this is a full stock rom that you would expect to get from verizon minus the knox crap i removed, If You use this as a Base For your rom please give credit where it is due, other than that feel free to use this as u see fit. thanks guys
Thanks to:
Hashcode- for Safestrap For Retail Note 3's
Scrosler - for being himself lol
Dsixda - for the kitchen used to deodex
ChainFire - for superSU
KingoApp- for the MJE root method

Retail: if you are on a retail note3 it is highly recomended to flash the MJE tar then root/install safestrap then install this (that way u have the most current firmware as the kernel and modem changed alot)
Dev Editions: i will have a flashable firmware package up soon

Reserved Just incase

Enjoy Guys!!!!

Awesome job!
Congrats on new release!

That was quick ! Thank you Beans
Sent from my SM-N900V using Tapatalk

beanstown106 said:
Retail: if you are on a retail note3 it is highly recomended to flash the mj7 tar then take the ota and root/install safestrap then install this (that way u have the most current firmware as the kernel and modem changed alot)
Click to expand...
Click to collapse
I don't have phone service and I don't get over-the-air updates so I'm still on MI9 de la Vega. Can I use B4.3?
Frank
SGH-I717(AoCP6.4)/SM-N900V(MI9-dlV)/XDA Premium

beanstown106 said:
Retail: if you are on a retail note3 it is highly recomended to flash the mj7 tar then take the ota and root/install safestrap then install this (that way u have the most current firmware as the kernel and modem changed alot)
Dev Editions: i will have a flashable firmware package when we can pull the MJE tar from kies/update assistant on a retail. however this works fine with our current modems because we can update kernels retails cannot unless they take ota
Click to expand...
Click to collapse
If we already on MJ7, just take update and re-root, install safestrap.. then we can flash this if need be?

Gunthermic said:
If we already on MJ7, just take update and re-root, install safestrap.. then we can flash this if need be?
Click to expand...
Click to collapse
ya basically well i would do this for all mje based roms, obviously once u do it once you dont need todo it again

beanstown106 said:
ya basically well i would do this for all mje based roms, obviously once u do it once you dont need todo it again
Click to expand...
Click to collapse
Thnx for reply.
I will be using this as my Base for DarkHorse Revolution ROM...

Gunthermic said:
Thnx for reply.
I will be using this as my Base for DarkHorse Revolution ROM...
Click to expand...
Click to collapse
anytime
Ps- Deodex is now live. time to get some zzzZZZzzz's LOL

Gunthermic said:
Thnx for reply.
I will be using this as my Base for DarkHorse Revolution ROM...
Click to expand...
Click to collapse
Hmmmmm ?
Sent from my SM-N900V using Tapatalk

So I can flash thks in one slot...then reboot in other slot and keep the new modem??

suzook said:
So I can flash thks in one slot...then reboot in other slot and keep the new modem??
Click to expand...
Click to collapse
Correct, modems are in place for all partitions so updating it will apply to all slots

Is the only way to update the kernal on the retail edition to take the OTA?
Hit thanks if I helped you out.
Sent from my Galaxy Note 3 running Jelly Beans
Previous Devices: S4, Note 2, Droid Charge, Fascinate
Posted by a Indirect Verizon Rep that actually knows what your talking about.

Is it possible to post a flashabpe zip of the new modem?
ButterBoost Rom Developer

Just asking is this the new ota update we are talking about and if so since im rooted with mj7 safestraped should i unistall safestrap an take the update?

DutchDogg54 said:
Correct, modems are in place for all partitions so updating it will apply to all slots
Click to expand...
Click to collapse
Hey Dutch,
So just to make sure that I understand this response correctly, if I back up my current stock slot [Running B4 in Stock slot], flash this ROM over it, then restore the backup I just made, would I pretty much be all set with the JE update?
Thanks!

hctimin said:
Hey Dutch,
So just to make sure that I understand this response correctly, if I back up my current stock slot [Running B4 in Stock slot], flash this ROM over it, then restore the backup I just made, would I pretty much be all set with the JE update?
Thanks!
Click to expand...
Click to collapse
Flashing via safestrap only updates the framework to the latest build so I believe you'd still have the old kernel and modem. As far as I know, (correct me if I'm wrong @beanstown106), since our bootloader is locked we have to use Odin to flash modems & kernels.

DutchDogg54 said:
Flashing via safestrap only updates the framework to the latest build so I believe you'd still have the old kernel and modem. As far as I know, (correct me if I'm wrong @beanstown106), since our bootloader is locked we have to use Odin to flash modems & kernels.
Click to expand...
Click to collapse
Gah,...that's a bummer.
I'm looking at how to unroot and was worried I'd softbrick the phone or something if I flashed an older/incompatible firmware
I made a backup of my original stock TW installation, but when I hit the Update button in About Phone, my Settings app just force closes and stops responding.

[Q] cannot root galaxy s3 i747 4.3

Sir I updated my galaxy s3 i747 with leaked firmware 4.3 with no knox.
It has unrooted my phone.
When I try to root my phone again.
I cannot root it.
And im having a battery problem.
It drains very fast.

Which ROM did you flash? You have the s3 from AT&T?

deepgrewal2 said:
Sir I updated my galaxy s3 i747 with leaked firmware 4.3 with no knox.
It has unrooted my phone.
When I try to root my phone again.
I cannot root it.
And im having a battery problem.
It drains very fast.
Click to expand...
Click to collapse
try cf-auto root first, that doesnt help
look for the official 4.3 stock rom for i747 flash it then root with cf-auto root, see if that works
sorry am too laxy to find it, am sure its somewhere on this threads :laugh:

winosxbuntu said:
try cf-auto root first, that doesnt help
look for the official 4.3 stock rom for i747 flash it then root with cf-auto root, see if that works
sorry am too laxy to find it, am sure its somewhere on this threads :laugh:
Click to expand...
Click to collapse
I've never seen an official AT&T stock 4.3 ROM. I know AT&T released 4.3 as an OTA update but don't think they released a full ROM.

deepgrewal2 said:
Sir I updated my galaxy s3 i747 with leaked firmware 4.3 with no knox.
It has unrooted my phone.
When I try to root my phone again.
I cannot root it.
And im having a battery problem.
It drains very fast.
Click to expand...
Click to collapse
audit13 said:
I've never seen an official AT&T stock 4.3 ROM. I know AT&T released 4.3 as an OTA update but don't think they released a full ROM.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2387423 http://forum.xda-developers.com/showpost.php?p=46804338
this two links provide 4.3 stock updates and developer @designgears pulled the official or the 4.3 update/firmware from AT&T, hope that can answer your question

winosxbuntu said:
http://forum.xda-developers.com/showthread.php?t=2387423 http://forum.xda-developers.com/showpost.php?p=46804338
this two links provide 4.3 stock updates and developer @designgears pulled the official or the 4.3 update/firmware from AT&T, hope that can answer your question
Click to expand...
Click to collapse
Aren't those are re-packaged ROMs rather than being a complete 4.3 ROM similar to Rogers/Bell/Telus ROMs? To install, you have to Odin back to a stock rom or TW-based ROM.

audit13 said:
Aren't those are re-packaged ROMs rather than being a complete 4.3 ROM similar to Rogers/Bell/Telus ROMs? To install, you have to Odin back to a stock rom or TW-based ROM.
Click to expand...
Click to collapse
am sure there is an official firmware from at&t and its hidden in this threads or somewhere on the net plus i was on a 4.1.2 stock, i dont like leaks just the official cleaned out so i did not have any problems with bootloaders/updating etc....... did not bother to use odin just flashed with CMW and everything worked
edit: devs need the official firmware from AT&T to work on , without it they have nothing (assuming you already know that)

winosxbuntu said:
am sure there is an official firmware from at&t and its hidden in this threads or somewhere on the net plus i was on a 4.1.2 stock, i dont like leaks just the official cleaned out so i did not have any problems with bootloaders/updating etc....... did not bother to use odin just flashed with CMW and everything worked
edit: devs need the official firmware from AT&T to work on , without it they have nothing (assuming you already know that)
Click to expand...
Click to collapse
AT&T did not release an official Odin tar for 4.1.2 or 4.3 it would be great if they did but they haven't and don't have any plans to do so.
Even without the tar files I think our developers have done a great job.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Agreed. The devs worked directly from the OTA. They never had the official firmware, as they all will tell you. You're not going to find it here or anywhere on the net.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

winosxbuntu said:
http://forum.xda-developers.com/showthread.php?t=2387423 http://forum.xda-developers.com/showpost.php?p=46804338
this two links provide 4.3 stock updates and developer @designgears pulled the official or the 4.3 update/firmware from AT&T, hope that can answer your question
Click to expand...
Click to collapse
I understand the devs had to re-create the ROM. My point was that these aren't stock, but they are certainly good to have around

shortydoggg said:
Agreed. The devs worked directly from the OTA. They never had the official firmware, as they all will tell you. You're not going to find it here or anywhere on the net.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
AT&T released official for 4.1.2 , dont know what happned with 4.3 but blame Samsung cuz after 4.1.1 S3's update, updates went down from there ........4.1.2 update was great, 4.3 being a WTF and no 4.2.2 .........but am optimistic that 4.4 is coming for S3's and never will CM/AOKP/PARANOID roms forsake the S3 it will have 5+ versions

winosxbuntu said:
AT&T released official for 4.1.2 , dont know what happned with 4.3 but blame Samsung cuz after 4.1.1 S3's update, updates went down from there ........4.1.2 update was great, 4.3 being a WTF and no 4.2.2 .........but am optimistic that 4.4 is coming for S3's and never will CM/AOKP/PARANOID roms forsake the S3 it will have 5+ versions
Click to expand...
Click to collapse
So since you allege AT&T released official firmware for 4.1.2(some other way than OTA) obviously my search skills aren't what they should be. Can you provide a link to backup your allegations?
Whether or not we get updates has little to do with Samsung and more to do with the service provider, and it is the service provider whom determines if we get an official copy released.
My thought is that AT&T is attempting to discourage us from customizing our devices. Some people have no business customizing anything and that can cause them to attempt to return their device under warranty. When the owner was the cause of the device failure that costs the provider money...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 08:07 PM ---------- Previous post was at 07:50 PM ----------
Btw I want to apologize to the OP here is a link to some roms that are pre rooted they're very close to stock with only minor differences mostly in its capabilities and some are debloated. These will get you rooted for sure, remove knox and should do what you want. I like the one from loserskater. This link below works only on the AT&T SGH-I747.
http://forum.xda-developers.com/showthread.php?t=2540998
once again I apologize for bickering in your thread while not even staying on topic.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

X-Note 9.0 for 900T

OK guys, There is no way I am the only one with a 900T itching to get my hands on KK and X-Note 9.0. I am very new to the whole rooting android devices but I am quickly learning the ropes. I have been reading many posts were where this is available to the 9005 versions. I also know that the 900T and 9005 are almost the same phone with 900T being locked (temporarily) to TMobile. I have been searching the threads for the past week looking for the answer if anyone with a 900T has been able to install the Official Poland Version 4.4.2 on their 900T. As some help I have been emailing someone else with a T-Mobile phone that helps to specialize in hard bricked devices. I am including the emails and I hope to get this thread moving forward. If it is not possible I would like to see if there is a way to work the system to get us the X-note 9.0 upgrade.
Originally Posted by FFTony
I am getting ready to add a room to my phone, I am a little worried about causing a hard brick. If I do are you able to fix the phone and at what cost? Also, what is your turn around time? Thanks.
Tomy1986.nt
It is still turn on what is phone model number ?
Originally Posted by FFTony
It is still running quite nicely, but I am concerned that the upgrade that I am going to attempt to perform will Brock my phone. I have read some threads on using the same card, but I don't know if it will work. I am just trying to cover my bases in a worst case scenario. My phone is sm-n900t. (T-mobile variant)
Side note: What I am going to attempt is to install the Poland version of kk to my phone. It is for the 9005 model (which the tmobile device is). Tmobile phones can run 9005 roms with a few updates, but I am not sure about the kk upgrade.
Tomy1986.nt
Have you already flashed stock 9005 Rom ? included bootloader of 9005 model ?
Originally Posted by FFTony
Not yet. I plan to tonight. So I should know tonight on how my phone on going to take the Poland upgrade.
Tomy1986.nt
Please do not flash another bootloader phone's model. it will hardbrick or IMEI number will be gone.

Until we get an official Kernel for 4.4.2 for Tmobile we wont be able to install it. I even tried it last night since I've used previous X-note editions in the past. Hopefully in a couple more weeks we'll have a kernel.

Darksynz said:
Until we get an official Kernel for 4.4.2 for Tmobile we wont be able to install it. I even tried it last night since I've used previous X-note editions in the past. Hopefully in a couple more weeks we'll have a kernel.
Click to expand...
Click to collapse
A few questions since I have spent a lot of time digging here in the threads.
1. Did you install the Official Poland 4.4.2 KK update?
2. Did you install the latest compulsion Kernel?
http://forum.xda-developers.com/showthread.php?t=2480353

I didn't. If I remember correctly Odin wouldn't let me install the bootloader
Sent from my SM-N9005 using Tapatalk
---------- Post added at 11:36 PM ---------- Previous post was at 11:30 PM ----------
Compulsion kernel doesn't yet support 4.4
Sent from my SM-N9005 using Tapatalk

Not to question your methods as I have not attempted yet. Did you have the correct boxes checked including the install bootloader? Also did you have your device is usb debug mode? Or is it impossible to flash another regions bootloader?
Sent from my SM-N900T using xda app-developers app

None of the 9005 roms will run on the N900T without a official KK kernel made for our device, I have done all the research, and it has the same issues that I went thru with Vision.

TheAxman said:
None of the 9005 roms will run on the N900T without a official KK kernel made for our device, I have done all the research, and it has the same issues that I went thru with Vision.
Axeman, Thank you very much for commenting on this post. I have seen your information alot dieingmy research. I have been attempting to gain traction on this topic. I do have a few questions.
1: is it possible to flash the official Poland KitKat version?
2: if it is possible, what are the risks that we are looking at?
I can see the problem with not having a custom kernel. Here is a link to one that I found earlier today.
http://forum.xda-developers.com/showthread.php?p=5027195
I also saw a thread today where the Canadian version is now able to upgrade to Kit Kat and flash x-note 9.0
Thank you again for your input.
Click to expand...
Click to collapse

You cant ODIN flash any official rom thats not intended for Tmobile. period.
Please someone correct me if Im wrong.

Can we flash xnote then flash the civ1.2 kernel would it work?
Sent from my SM-N9005 using xda app-developers app

Yes.. I'm running v 11 now
Sent from my SM-N9005 using Tapatalk
---------- Post added at 08:33 PM ---------- Previous post was at 08:32 PM ----------
You must flash the original 4.4.2 first though
Sent from my SM-N9005 using Tapatalk

Darksynz said:
Yes.. I'm running v 11 now
Sent from my SM-N9005 using Tapatalk
---------- Post added at 08:33 PM ---------- Previous post was at 08:32 PM ----------
You must flash the original 4.4.2 first though
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
There is a link in the q&a forum for xnote. This gives specific instructions for getting it to work on tmobile versions of the note 3. I tried on 4.3 and was successful and also on 4.4.2 successful as well. im aroma I just selected the uk version to flash. you probably already know this but I thought id post this for future reference for other members. this rom is real stable and has not gave me any issues whatsoever from version 11 to 13

I'm on V12 and I LOVE THIS ROM

mastermindx85 said:
Can we flash xnote then flash the civ1.2 kernel would it work?
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
The only thing I flashed through odin was the 4.4.2 bootloader for tmobile
Everything else was done through recovery
Tmobile version xnote 13
Civ version 2.1 kernel for tmobile note 3
And nfc wifi fix
I do recall reding along the threads somewhere that if you flash a non tmobile bootloader through odin you will end up with a fancy paper weight.
http://forum.xda-developers.com/showthread.php?p=50728165
This is where the info is in op in quoted box specific for t mobile
Sent from my SM-N9005 using xda app-developers app

kitkat
chuko303 said:
I'm on V12 and I LOVE THIS ROM
Click to expand...
Click to collapse
so its just like on the 4.3 bootloader. all we have to do is flash a tmobile kernel and the nfc wifi bluetoothfix?

thewierdone said:
so its just like on the 4.3 bootloader. all we have to do is flash a tmobile kernel and the nfc wifi bluetoothfix?
Click to expand...
Click to collapse
Yes. But I was successful flashing it on 4.3 without updating bootloader for version 12. Just flashed in the following order
Rom
Kernel
Fix
Sent from my SM-N9005 using xda app-developers app

[Q] Need Help! Trying to return 4.3 modded back to stock.

Hello,
I am having many issues and bugs like copy and pasting not working, not being able to text pictures or post pictures to fb, with my Galaxy S3. It is running a custom "Stock mod" rom. I want to re-install everything back to completely STOCK and start fresh like the day i got it... however i cant seem to find a way to do this with 4.3. Can someone please guide me in the right direction to getting either an extremely stable samsung stock themed rom or just the official Samsung 4.3 or higher rom. I just want my phone to function normally again. So sick of bugs and glitches.
Below are the stats for my phone:
Custom bootloader: TWRP v2.6.3.1
Model: AT&T SGH-I747
Android Version: 4.3
Baseband: I747UCUEMJB
Kernel: 3.0.31-2024954
[email protected] #1
Thu Oct 31 01:05:53 KST 2013
Build Number: JSS15J.I747UCUEMJB
SE for Android status: Enforcing SEPF_SAMSUNG-SGH-1747_4.3_0010
Thanks in advance for anyhelp you guys can provide. Ive been beating my head against the wall trying to find a normal rom. Thanks!
Cheers!
-Endergotgame

I'm trying to figure out the same thing so I'm going to bump this thread and see if anyone has answers.

AT&T never released 4.3 as a complete ROM, only as an update from a previous ROM so I'm not sure if you can return completely to stock 4.3.

audit13 said:
AT&T never released 4.3 as a complete ROM, only as an update from a previous ROM so I'm not sure if you can return completely to stock 4.3.
Click to expand...
Click to collapse
Is there a complete stockish rom that i can upgrade too that wont be glitchy? sick of apps not working or google apps crashing all the time.

Endergotgame said:
Is there a complete stockish rom that i can upgrade too that wont be glitchy? sick off apps not working or good apps crashing all the time.
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=2658486
That is as close to an Odin restore you can get. It is a stock rom stock recovery no root it is exactly how it was released to our phones.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth

theramsey3 said:
Try this http://forum.xda-developers.com/showthread.php?t=2658486
That is as close to an Odin restore you can get. It is a stock rom stock recovery no root it is exactly how it was released to our phones.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
Click to expand...
Click to collapse
Will knox interfere if i want to re-root? Also what would be the best way to root once installing this and going back to stock 4.3?

Endergotgame said:
Will knox interfere if i want to re-root? Also what would be the best way to root once installing this and going back to stock 4.3?
Click to expand...
Click to collapse
I don't like just handing out links but this one is a little harder to find so here goes. http://forum.xda-developers.com/showthread.php?t=2538991
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth

theramsey3 said:
I don't like just handing out links but this one is a little harder to find so here goes. http://forum.xda-developers.com/showthread.php?t=2538991
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
Click to expand...
Click to collapse
Thank you!! I've been trying to find out as much as i can but the info surrounding 4.3 is rather sparse...