Hi!
Rom based on original sources.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* REMEMBER! INSIDE YOU GET OC KERNEL - NO LOGCAT, NO SUPPORT!!
*
* AND FINALLY - I CANT PROMISE FINISH THAT ROM TO STABLE BUILD
* I CAN DROP WORK WITH IN EVERY TIME WHEN I WANT TO
*/
Note : Paranoid Android 4.1 is only for jellybean (v20) baseband. If you are on ics (v10) baseband flash v20 baseband from this thread
Format everything other then Sd card (Full format is must needed when you flash cm11.0 1st time)
IF YOU INSTALL WITHOUT CLEAN, I PIE YOU WHEN YOU REPORT FC!
Flash the gapps:
Code:
Reboot
boot into recovery mode
Install gapps
Reboot
Code:
Boot into Recovery
Wipe cache and dalvik cache
Flash new PA 4.1 zip
Reboot
PLEASE DON'T MIRROR MY DOWNLOAD LINKS
DOWNLOAD FROM GOOLE
GAPPS: http://api.crxteam.info/gapps/gapps-essential-4.4.3-20140614-signed.zip
filename explain
Filename is:
pa_model.year-month-day-hour-minutes.cr3pt.zip
example:
pa_p700.201403272019.cr3pt.zip
this is pa for P700, maked od 2014-03-27, build from 20:19 GMT+1 time.
ATTENTION! FIRST BOOT CAN BE CRAZY LONG - PLEASE BE PATIENT AND WAIT!
ABOUT OTA - IF CAN'T UPDATE ROM, INSTALL LATEST CWM - http://d-h.st/L8Y
SCREENSHOTS:
What's working:
All what's need
sources:
https://github.com/cr3pt/
https://github.com/TeamHackLG
https://github.com/CRXTeam
https://github.com/AOSPA
https://github.com/AOSPA-legacy
If you like this image, Give me beer
XDA:DevDB Information
Unofficial Paranoid Android 4.4, ROM for the LG Optimus L3
Contributors
cr3pt
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSPA-legacy
Version Information
Status: Beta
Created 2014-10-18
Last Updated 2014-10-18
Oh, interesting. Will check this out and report back.
edit: Ok, everythings smooth, PA's quick tiles are awesome, I miss circle battery icon, but thats rom releated, everythings smooth, haven't done antutu yet.
good rom.
everything works and is fast, I recommend
Here's some screenshots, rom is very smooth, and fast. Good Work. :good:
AnTuTu Score. ! Overclocked at 1228 mhz !
Is PIE working for anyone?
Sent from my LG-P700 using XDA Premium 4 mobile app
This is the smoothest kitkat rom that i ever used, I haven't noticed any bugs except sound recorder, it doesn't work. !
---------- Post added at 10:14 AM ---------- Previous post was at 10:13 AM ----------
Lukijs said:
Is PIE working for anyone?
Sent from my LG-P700 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There is no PIE, and also a lot of features are missing, maybe because it's the first built !
any P705 user have tried this?
Lukijs said:
Is PIE working for anyone?
Sent from my LG-P700 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ArnisHoti said:
This is the smoothest kitkat rom that i ever used, I haven't noticed any bugs except sound recorder, it doesn't work. !
---------- Post added at 10:14 AM ---------- Previous post was at 10:13 AM ----------
There is no PIE, and also a lot of features are missing, maybe because it's the first built !
Click to expand...
Click to collapse
why not use third party apps till official pie is there?this two under me are not bad.
[APP][3.1+] Pie Control V1.4.2 - Major Update! [Update: 27/2/14]
http://forum.xda-developers.com/showthread.php?t=2454531
---------
[APP][ROOT] LMT Launcher v2.0 RC7 for various devices
http://forum.xda-developers.com/showthread.php?t=1330150
There is no PIE, and also a lot of features are missing, maybe because it's the first built !
Click to expand...
Click to collapse
http://androidnews.co.in/2014/03/03/paranoid-android-4-1-beta-released-pie-controls-added/ There should be, since PIE was reintroduced in this 4.1 beta of PA.
Seems like it's npt working yet, I don't have it in personalization and I don't get a question to enable it when I turn on immersive mode.
It's not sync with github?? I don't know. Just wait for update
cr3pt said:
It's not sync with github?? I don't know. Just wait for update
Click to expand...
Click to collapse
I will, thanks for another fantastic rom!
-CALIBAN666- said:
why not use third party apps till official pie is there?this two under me are not bad.
[APP][3.1+] Pie Control V1.4.2 - Major Update! [Update: 27/2/14]
http://forum.xda-developers.com/showthread.php?t=2454531
---------
[APP][ROOT] LMT Launcher v2.0 RC7 for various devices
http://forum.xda-developers.com/showthread.php?t=1330150
Click to expand...
Click to collapse
Yeah I will for now, thanks.
Is it smoother than carbon? Does anyone have tried on P705?
Sent from my LG-P705 using Tapatalk
---------- Post added at 06:18 AM ---------- Previous post was at 06:17 AM ----------
And @cr3pt, will you build for us p705 user?
Sent from my LG-P705 using Tapatalk
PA released 4.1 Beta 2
Sent from my LG-P700 using XDA Premium 4 mobile app
I wonder what they added
pavulon85 said:
I wonder what they added
Click to expand...
Click to collapse
Hotfixes and
Quicksettings: Bump dual switch icon(s)
Quicksettings: New transition animation
Fixed volume/volume panel related bugs
Lightbulb has a lockscreen widget now
some little option has a system
I wonder when will such as to be a complete paranoid
Uploaded new build. Changelog -> look into github sources.
regards
cr3pt
cr3pt said:
Uploaded new build. Changelog -> look into github sources.
regards
cr3pt
Click to expand...
Click to collapse
Hi cr3pt. Can i expect this rom on p705? I would love to try this rom.
Sent from my LG-P705 using Tapatalk
Very good
Installed previous version. This rom is much smoother than previous Vanir rom. Thanks!
Related
This was created by Developer mwielgosz. One of my roles is to Host this thread.
http://xbones.org
Current version: 0.4.1
This custom Android project is built off of Google android-4.0.4_r2.1 source code.
The Crossbones Kernel (0.1.0) is included in the ROM which was modified from the stock Google kernel source code.
We would like to give a special thanks to http://www.goo-inside.me for hosting our buildbot and server. If you have an AOSP project and would like to utilize the buildbot for your project, please signup at http://goo-inside.me/signup
This is the single best tool we have to our disposal. Thank you snipa!
News:
* [6/21] Version 0.4.1 released for GSM Galaxy Nexus
Development plan:
* The alpha stage (0.0.X) will be focusing on properly branding the ROM and making sure that it is a solid base.
* The beta stage (0.X.0) will be focusing on custom tweaks, kernels, and modifications.
* The stable stage (X.0.0) will be focusing on fixing any left over issues from the beta stage.
Source code:
https://github.com/Crossbones
Installation instructions:
* Wipe your phone through recovery
* Flash ROM
* Flash gapps
* Reboot
-----------------------------
Download links: (Changelog below)
Current Version: 0.4.1
ROM: 0.4.1 Download
Optional: Gapps
-----------------------------
Changelog:
0.4.1:
* Release for GSM Galaxy Nexus (maguro)
* Added Quick Settings to Notification bar!
* Update to Android 4.0.4_r2.1
* Fix screen flash bug when turning screen on/off
* Fixed bug where Torch app was not building on Galaxy Nexus devices
-----------------------------
Screenshots:
-----------------------------
Video
Crossbones 0.4.1: Composed by Maciu Laciu
http://www.youtube.com/watch?v=NiYhD0Bn588&feature=youtu.be
-----------------------------
Developer Information:
Please visit us @ - http://xbones.org or click on Signature Pic
Follow @Xbones_dev on twitter for updates.
Email: [email protected]
Email: [email protected]
DONATE HERE
Crossbones Kernel version: 0.1.0
The Crossbones Kernel (tuna) was derived from the Codename Android kernel, which is based upon (and created by) the Savaged-Zen kernel. We chose to base our kernel off of this particular kernel as mwielgosz has worked closely in the past with the developers of this kernel.
The original kernel base is built off of 4.0.4 kernel source code and is at linux version 3.0.26
Source code:
https://github.com/C...nes_kernel_tuna
What sort of ui and system tweaks we get from this rom?
navodwickra said:
What sort of ui and system tweaks we get from this rom?
Click to expand...
Click to collapse
First, almost all non-stock features have been coded by myself. Of course there are a few that I didn't write, but this ROM is minimal but unique.
Features include:
* Crossbones Welcome app for showing a changelog with each new release
* CPU Settings built into Settings app
* A custom kernel with tons of governor/scheduler choices
* Quick Settings menu from icon in the notification bar (new with this release, screenshot in OP)
* Extended Power options (I did not write this code)
* The MMS Split code I wrote way back when
* GooManager preinstalled for OTA updates.
I forget what else is in the ROM that's different from stock. Also, some things about the Gnex version are different than the Nexus S version. I've been working on this project for the past 6 months and I've forgotten some of the things that I've changed from stock. I guarantee there are some unique features that will be expanded upon, for example, I'm very excited to get more work done on the Quick Settings
Please do not start requesting features. I have a list of things I need to change/add. Sadly, I don't have the time to work with the ROM all the time, I have a job, two kids, and I'm getting married next Saturday (provided it doesn't rain) :victory:
mwielgosz said:
First, almost all non-stock features have been coded by myself. Of course there are a few that I didn't write, but this ROM is minimal but unique.
Features include:
* Crossbones Welcome app for showing a changelog with each new release
* CPU Settings built into Settings app
* A custom kernel with tons of governor/scheduler choices
* Quick Settings menu from icon in the notification bar (new with this release, screenshot in OP)
* Extended Power options (I did not write this code)
* The MMS Split code I wrote way back when
* GooManager preinstalled for OTA updates.
I forget what else is in the ROM that's different from stock. Also, some things about the Gnex version are different than the Nexus S version. I've been working on this project for the past 6 months and I've forgotten some of the things that I've changed from stock. I guarantee there are some unique features that will be expanded upon, for example, I'm very excited to get more work done on the Quick Settings
Please do not start requesting features. I have a list of things I need to change/add. Sadly, I don't have the time to work with the ROM all the time, I have a job, two kids, and I'm getting married next Saturday (provided it doesn't rain) :victory:
Click to expand...
Click to collapse
Congratulations on your wedding hope it won't rain . Appreciate your work man I'll give it a go today :fingers-crossed:
Congrats on your wedding and I will give this rom a spin
Sent from my Galaxy Nexus using Tapatalk 2
Happy wedding ! Hope you'll have a bright sun with you !
Intelligent man. First had the kids and now that you are fairly certain, you are getting married. Great approach.
LOL!
Many congratulations on your upcoming (hopefully Rain-Free) Wedding
BTW: Some apps say that there is no busybox installed
arifqur said:
Intelligent man. First had the kids and now that you are fairly certain, you are getting married. Great approach.
LOL!
Many congratulations on your upcoming (hopefully Rain-Free) Wedding
BTW: Some apps say that there is no busybox installed
Click to expand...
Click to collapse
Busybox does not come with the rom. I keep forgetting to add it in...
You should be able to download it through the market though.
Sent from my Nexus S 4G using Tapatalk 2
mwielgosz said:
Busybox does not come with the rom. I keep forgetting to add it in...
You should be able to download it through the market though.
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
Yup Thanks. Downloaded it through market and working well with ALSA which was complaining previously.
sounds interesting i will try this and report later
---------- Post added at 12:50 PM ---------- Previous post was at 12:20 PM ----------
just one question: is this rom multi-language?
wayne850 said:
sounds interesting i will try this and report later
---------- Post added at 12:50 PM ---------- Previous post was at 12:20 PM ----------
just one question: is this rom multi-language?
Click to expand...
Click to collapse
Yes
Sent from my Nexus S 4G using Tapatalk 2
Has anyone clicked on the widget text in the QuickSettings drop down from the notification bar? Might be handy
Sent from my Nexus S 4G using Tapatalk 2
mwielgosz said:
Has anyone clicked on the widget text in the QuickSettings drop down from the notification bar? Might be handy
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
yes very nice it's very useful to get fast into the settings eg bluetooth for visibility. can't wait for the next update
btw i noticed that the touch recovery is sometimes very laggy on scrolling and it chooses other action. for example i choose "install zip" and it chooses "advance settings"
wayne850 said:
yes very nice it's very useful to get fast into the settings eg bluetooth for visibility. can't wait for the next update
btw i noticed that the touch recovery is sometimes very laggy on scrolling and it chooses other action. for example i choose "install zip" and it chooses "advance settings"
Click to expand...
Click to collapse
I would recommend using GooManager to select, order, and flash zips. Just make sure that TWRP is installed. You can install it through GooManager.
I don't develop the recovery itself, so I'm not sure why it would be laggy. I've never had a lag issue using GooManager though, and did write the select, order, and flash code
If its GooManager you're having an issue with, talk to the guys at goo.im about that one.
Sent from my Nexus S 4G using Tapatalk 2
I've been meaning to post this in the OP. Its a video of Crossbones 0.4.1:
http://www.youtube.com/watch?v=NiYhD0Bn588&feature=youtu.be
Video made by Maciu Laciu
Sent from my Nexus S 4G using Tapatalk 2
Hi does this ROM include the theme manager?
Thanks..
dan96815 said:
Hi does this ROM include the theme manager?
Thanks..
Click to expand...
Click to collapse
no
Public test releases of Crossbones 2.0 (Jellybean) are available from the following link.
http://goo.im/devs/crossbones/test_releases
Standard JB gapps from goo.im work perfectly.
This release does not include a custom kernel at this point, but a lot of work has been done.
Sent from my Nexus S 4G using Tapatalk 2
mwielgosz said:
Public test releases of Crossbones 2.0 (Jellybean) are available from the following link.
http://goo.im/devs/crossbones/test_releases
Standard JB gapps from goo.im work perfectly.
This release does not include a custom kernel at this point, but a lot of work has been done.
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
installed ur rom on my gnex really smooth and fast awesome job
Sent from my SPH-L710 using xda premium
After talking with a mod and Star Fighter we came to the agreement that another thread regarding CM11 is not needed.
Please refer to this thread for any feedback/bug report. Thank you
http://forum.xda-developers.com/showthread.php?p=48199636
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restores the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
For device specific changes use CMXlog
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/d802_Info
How To Install CyanogenMod
First time installing CyanogenMod 11 to your LG G2 (D802), or coming from another ROM:
- Read the official wiki
- Copy GApps and CM11 ZIPs to your phone
- Boot into Recovery
- DO A DATA WIPE / FACTORY RESET
- Flash CM11 zip from sd_internal
- Flash GApps zip from sd_internal (if wanted)
- Reboot
- Restoring Apps + Data via Titanium Backup might cause problems and is not recommended, avoid it if possible.
Upgrading from earlier version of CyanogenMod 11:
- Copy CM11 ZIP to your phone
- Boot into Recovery
- Flash CM11 zip from sd_internal.
- Reboot
CM11 official nightly builds:
http://www.get.cm/?device=d802
Google Apps:
http://goo.im/gapps
ClockworkMod-Recovery:
Scroll down to LG G2
TWRP:
[GUIDE] INSTALLING TWRP on LG G2
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
What's working
_ ART Works
_ No random reboots (need further testing)
Please provide feedback (including Stock camera & IR blaster functionality )
Bugs
_ Animations a bit laggy.
_ Immersion mode not working.
_ Settings to set roaming inside the home country is not available.
_ Echos during phone calls.
Please provide feedback
If reporting a bug please refer which nightly you are running. Thank you.
Device Specific Nightly Changelog
CMXLog: http://10.2.cmxlog.com/?device=d802
If you're going to reuse CM's work, which they are doing for free, be fair and give proper credits.
This is the only payment CM is really demanding and they deserve it to be mentioned because of the countless hours they've put into this project.
All Credits to CM Team. Please donate to them or press thanks. Please note I am not the G2's CM device maintainer.
Screenshots
Work in Progress
Thanks to StarFighter for his CM 4.3.1 thread from which I took most informations.
Yeah! It's official! Great present from Santa Claus!
Tapatalk-kal küldve az én LG-G2-el
Installed with TWRT 2.6.3.3. Installed ROM and then gapps dated 26th november. I enableb ART right after first boot. The system rebooted and optimized. All works fine. Maybe transitions are a bit laggy. If you turn them off then all is OK. You are able to change clock icon and setup quick settings. It does not have immersive mode. That is all I could check right out of my head.
Installation failed with TWRP 2.6.3.2. Gonna give it a try with CWM.
Edit
I had 2 different TWRP. Tried on the other one with same version. Working.
UI is bit laggy but it's great. Thanks CM Team.
---------- Post added at 12:12 PM ---------- Previous post was at 11:59 AM ----------
doctor78SI said:
Installed with TWRT 2.6.3.3. Installed ROM and then gapps dated 26th november. I enableb ART right after first boot. The system rebooted and optimized. All works fine. Maybe transitions are a bit laggy. If you turn them off then all is OK. You are able to change clock icon and setup quick settings. It does not have immersive mode. That is all I could check right out of my head.
Click to expand...
Click to collapse
At my end transitions are more laggy than the Unofficial CM11 build in the Orig Dev section. Have you tried that? Thanks.
http://forum.xda-developers.com/showthread.php?t=2495859
What's the difference?
Sent from my LG-D802 using XDA Premium 4 mobile app
Flashed with philz recovery over the unofficial build by vertigo. Worked flawless. Thanks a lot!
StarFighter said:
http://forum.xda-developers.com/showthread.php?t=2495859
What's the difference?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Minor ones really. As you can see I mentioned you at the bottom of the thread, thanking you. I would like to keep this specific for the international version D802 and CM11. Because your thread is under Original Development, it could mean that more variants are supported and discussed in the thread. Some bugs are device-specific and I would like it to keep this thread with only D802 bugs.
Moreover, your thread's discussion focuses on CM10.2. As I said, I would like to keep this CM11 only.
Hope it clarifies.
waleedshiekh said:
Installation failed with TWRP 2.6.3.2. Gonna give it a try with CWM.
Edit
I had 2 different TWRP. Tried on the other one with same version. Working.
UI is bit laggy but it's great. Thanks CM Team.
---------- Post added at 12:12 PM ---------- Previous post was at 11:59 AM ----------
At my end transitions are more laggy than the Unofficial CM11 build in the Orig Dev section. Have you tried that? Thanks.
Click to expand...
Click to collapse
doctor78SI said:
Installed with TWRT 2.6.3.3. Installed ROM and then gapps dated 26th november. I enableb ART right after first boot. The system rebooted and optimized. All works fine. Maybe transitions are a bit laggy. If you turn them off then all is OK. You are able to change clock icon and setup quick settings. It does not have immersive mode. That is all I could check right out of my head.
Click to expand...
Click to collapse
Thanks guys. Can I have some screenshots as well?
Screenshots are more or less the same as CM 10.2. Icons are different (KK) and status bar has white fonts (also KK). Other than that it is the same.
---------- Post added at 02:11 PM ---------- Previous post was at 01:57 PM ----------
BUG: when I am talking with ppl they complain that they hear echos. This does not occur on PA 4.0 . Flashed back PA 4.0 12/06 and all is fine.
Just found this thread... Posted in vertgos cm11 thread but.... Here's my issue... Flashed via the cm updater in Vertigos latest cm11 and everything went smoothly... but now I'm not seeing my camera or gallery app..hangouts and a few other apps are missing as well
Sent from my LG-D802 using xda app-developers app
Nice seeing this actually happened
Really looking forward to it, hoping it will soon include the4.4.1 too
Sent from my LG-D802 using xda app-developers app
Such fast progress from awesome devs thank you for your hard work, I can't wait to flash this when it becomes a bit more stable.
On that note, how is battery life compared to CM10.2?
had to upgrade twrp to .3.3 before flashing would work
Awesome work :good: Hope the bugs get fixed soon
Cant´find any bug so far. No echo, FC, delay in calls. Going to test battery but I am worried it won´t be better than stock rom.
Gapps link isnt usefull cause 4.4 gapps are not avsilable in gapp page.
Roms are to nightly and buggy...to many errors
Sent from my LG-D802 using xda app-developers app
Device D802
ROM cm-11-20131206-NIGHTLY-d802.zip
GAPPS PA 4.4
Clean Install with TWRT 2.6.3.3
When I move out of WiFi range it still shows as "Connected to Wifi", does not rejoin when I get back into range.
Can ONLY manually rejoin after reboot.
***
Great job and thanks a million! Loving the work! :victory:
pxius said:
Device D802
ROM cm-11-20131206-NIGHTLY-d802.zip
GAPPS PA 4.4
Click to expand...
Click to collapse
Those are Paranoid Android Gapps. Not suitable for pure cm.
Sendt fra min LG-D802 med Tapatalk
After talking with a mod and Star Fighter we came to the agreement that another thread regarding CM11 is not needed.
Please refer to this thread for any feedback/bug report. Thank you
http://forum.xda-developers.com/showthread.php?p=48199636
xodeus said:
Those are Paranoid Android Gapps. Not suitable for pure cm.
Sendt fra min LG-D802 med Tapatalk
Click to expand...
Click to collapse
Lol what are you on about. Pa gapps are just fine , like any other gapps.
Sent from my LG-G2 using Tapatalk
Now why did you change the thread name to unofficial nighties? I know you and startfighter both have threads but still the OP links to the official nightly builds
DarkCyanogenMod is a Rom CyanogenMod Based and is free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Github
Download ROM
Download PA Gapps
DCM Videos
OmniROM Sound Packs
Sypher's Sound for Audio Theme Support (Like OmniROM Sound Packs)
HOW TO INSTALL THE ROM
- Make sure you are either on any KitKat ROM (CM11, etc) or on KK Sony based ROM and NOT on 4.3 (or older) Sony based ROM
- Download the latest build and Gapps and copy them to your device
- Reboot to recovery
- Take a nandroid backup
- Recommended - Full wipe and factory reset
- Flash ROM
- Flash Gapps
- Reboot System
- Enjoy
XDA:DevDB Information
DarkCyanogenMod, ROM for the Sony Xperia Z1
Contributors
davidteri91, OmarEinea
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod, SlimRom, ParanoidAndroid, OmniRom
Version Information
Status: Stable
Created 2014-09-01
Last Updated 2014-09-17
Screenshots
Reserved
davidteri91 said:
reserved again
Click to expand...
Click to collapse
No screenshots or list on included bonus features?
Destroyedbeauty said:
No screenshots or list on included bonus features?
Click to expand...
Click to collapse
Hi
I'm building the thread
DarkCM V2.00 Enjoy
Delete
@davidteri91
Thanks for bring us another rom for our device :good:
Added to the list of things to try
Inviato dal mio C6903 utilizzando Tapatalk
? New Rom WooW ?
thanks for bring for honami ?
download now ? a lot of features ?
Is camera working, without any FC's??
solidsnakecod4 said:
Is camera working, without any FC's??
Click to expand...
Click to collapse
Here yeah for me it's working
i am askin coz cm11 snapshot has camera bug, by thnx for the help.
solidsnakecod4 said:
i am askin coz cm11 snapshot has camera bug, by thnx for the help.
Click to expand...
Click to collapse
Display color calibration is working now here ,now I am working for fully fast charge option
davidteri91 said:
Display color calibration is working now here ,now I am working for fully fast charge option
Click to expand...
Click to collapse
Included in next update?
Destroyedbeauty said:
Included in next update?
Click to expand...
Click to collapse
Yeah
Fast charge was added in kernel but it doesn't has any effect when I turn it on.
I am testing another patchs
Regards
davidteri91 said:
Yeah
Fast charge was added in kernel but it doesn't has any effect when I turn it on.
I am testing another patchs
Regards
Click to expand...
Click to collapse
Good to hear! The next update will include the color control also?
solidsnakecod4 said:
Is camera working, without any FC's??
Click to expand...
Click to collapse
Yes work great with me.
But I have camera fixing already ?
Sent from my Xperia Z1 using Tapatalk
I'm using this ROM since yesterday and I must say that I am very satisfied...I have not encountered any problem for now; really really smooth, and stable as a rock :good: ...I'm still testing the battery life, but seems OK...
I'm using notifications in loockscreen (even if they are not exactly the best, in comparison to MIUI that I was using before) and with PIE I can say that I have really a 5-inch phone now
I'd like to see more features/optimization in the future, and please, keep up the good work bro
Inviato dal mio Xperia Z1 utilizzando Tapatalk
7sen said:
Yes work great with me.
But I have camera fixing already ?
Sent from my Xperia Z1 using Tapatalk
Click to expand...
Click to collapse
Can i have the link of patch??:fingers-crossed:
Original Theme, other Theme
For example, Android L from doga. Ozcaroka, or Herathon Light.
Gesendet von meinem Xperia Z1 mit Tapatalk
[August 25th] Sushi SailfishOS Nightly for Galaxy Nexus (Stable(ish) & Bleeding Edge)
[SailfishOS][ROM][1.1.2/1.1.4 - August 25th 2015] Sushi SailfishOS Nightlies
Code:
*** Disclamer
-- SailfishOS for Maguro is currently to be considered 'pre-alpha' and as such is not ready for use as a daily driver, testing is welcomed but bug reports without reproducible steps and preferably a screenshot / logs, are not.
Introduction
-- This nightly build will not always be nightly but will however always reflect the most recent updates made to the Sailfish OS port for Maguro. It is done to allow people to get a glimpse into how development is tracking and for the development team & Jolla themselves to get an insight into how their changes are affecting users.
Click to expand...
Click to collapse
Installation instructions
* -- Make a backup
* -- Factory Reset (Wipe /data & /cache)
* -- Wipe /system
* -- Install CyanogenMod 10.1.3: http://download.cyanogenmod.org/get/jenkins/42525/cm-10.1.3-maguro.zip
* -- Install SailfishOS: ( 1.1.2 u11 - Alpha ) https://www.androidfilehost.com/?fid=23991606952592386 ( 1.1.4 u13 - Pre-Alpha ) https://www.androidfilehost.com/?fid=96042739161892475
* -- Reboot
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* sledges
* vakkov
* SailfishOS Porters
* Jolla Team
XDA:DevDB Information
Sushi Sailfish Nightlies, ROM for the Samsung Galaxy Nexus
Contributors
sabianadmin, vakkov, sledges
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 3.0.x
ROM Firmware Required: CM10
Based On: CyanogenMod 10.1.2
Version Information
Status: Alpha
Current Stable Version: 1.1.2
Stable Release Date: 2015-07-31
Current Beta Version: 1.1.4
Beta Release Date: 2015-09-30
Created 2015-04-25
Last Updated 2015-04-27
Status:
1.1.4.29 Nightly: Updated 29th April 2015
1.1.2.16 Nightly: Updated 25th April 2015
its very good idea port sailfish os on galaxy nexus. And I install all your updates, but can you write what work or not work in deferent ver. of your updates please!
mmandro25 said:
its very good idea port sailfish os on galaxy nexus. And I install all your updates, but can you write what work or not work in deferent ver. of your updates please!
Click to expand...
Click to collapse
Hi there mmandro, if you want to know whats changed from build to build you can check the commit logs via https://github.com/sledges/sfa-mer, there is no public change log (I can talk to the guys about doing so) so the commits are the nearest thing to a change log we have for the moment
phone,sms,data(RIL) not working in nightly build 1.1.4 u13.
high screen DPI settings try to revert to normal,
graphical glitches(maybe because of high screen dpi seeting)
wifi is working, uknown sources check box working, bluetooth not working
freesoftwareman said:
phone,sms,data(RIL) not working in nightly build 1.1.4 u13.
high screen DPI settings try to revert to normal,
graphical glitches(maybe because of high screen dpi seeting)
wifi is working, uknown sources check box working, bluetooth not working
Click to expand...
Click to collapse
Hi there freesoftwareman thank you for the update, could you try the 1.1.2 build? Just flash it over the 1.1.4 (Also theres a pretty significant battery drain on 1.1.4 at the moment)
ok,I will try,also in 1.1.4 build camera is finally opened but no picture just black
can't wait vakkov to update camera modules
in 1.1.2 build the same errors with RIL, camera white screen,bluetooth not working...
freesoftwareman said:
in 1.1.2 build the same errors with RIL, camera white screen,bluetooth not working...
Click to expand...
Click to collapse
Updated the 1.1.4 build (now at 1.1.4.29) with the new libhybris changes included (Fixes a memory leak), let me know if this build sorts out the issues with RIL
Will be testing on my old Galaxy Nexus.
Sent from my LG-ls990 using XDA Free mobile app
What's the root password? I want to install open repo and warehouse app repository.
Sent from my LG-ls990 using XDA Free mobile app
sabianadmin said:
Updated the 1.1.4 build (now at 1.1.4.29) with the new libhybris changes included (Fixes a memory leak), let me know if this build sorts out the issues with RIL
Click to expand...
Click to collapse
where is the download link for new version?
---------- Post added at 11:29 PM ---------- Previous post was at 10:39 PM ----------
blmvxer said:
What's the root password? I want to install open repo and warehouse app repository.
Sent from my LG-ls990 using XDA Free mobile app
Click to expand...
Click to collapse
go to developer settings and enter password you like
freesoftwareman said:
where is the download link for new version?
---------- Post added at 11:29 PM ---------- Previous post was at 10:39 PM ----------
go to developer settings and enter password you like
Click to expand...
Click to collapse
Where the old link was? Those links will always point to the latest build for stable and pre-alpha
freesoftwareman said:
where is the download link for new version?
---------- Post added at 11:29 PM ---------- Previous post was at 10:39 PM ----------
go to developer settings and enter password you like
Click to expand...
Click to collapse
It wouldn't stick so I just ssh'd using Ubuntu and changed the password.
Sent from my LG-ls990 using XDA Free mobile app
sabianadmin said:
Where the old link was? Those links will always point to the latest build for stable and pre-alpha
Click to expand...
Click to collapse
I have tried newest version,RIL not working ,the same errors like before,
only wifi working
freesoftwareman said:
I have tried newest version,RIL not working ,the same errors like before,
only wifi working
Click to expand...
Click to collapse
I'll mention it to the team.
Thanks for great work with sailfish
I have using this, latest version. This one: sailfishos-maguro-release-1.1.4.29-my1-201504292249.zip
I can call, send sms. WiFi working. Mobile data working too.
Bluetooth and camera not working. BT only blinking after ticking the ON button. But is I leaving BT menu and returning back, button is OFF again.
Ant camera is only black screen with various camera settings. I can change settings, but camera not working. Not front nor main cam.
This is a great new!
I'm incredibly happy that someone (maybe italian like me) had the great idea of porting a wonderful OS to our honoured GNext to give him new life. I hope I will be able to use this as my daily OS.
I wish I could help more testing it but this is the only phone I have and I can't risk to brick it.
Good luck, I wish you all the best and keep this project alive, I'm sure the Gnext community will be happy to switch to this OS.:laugh:
Can some tell me how to build for maguro and where is source i want to test it and update it i am bored of android
Hello,
I just wanted to say thanks for the ROM. I'm flashing it right now.
I also wanted to say that the pre-alpha link points to an earlier version of 1.1.2 than the alpha one.
Cheers,
sudamod is based on the secondary development of the system, they are committed to creating a pure Android localization system
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Changelog :
2017-09-01: Initial Testing Release
Installation Instructions:
- Download the ROM
- Put the downloaded zip files on your SDCard
- Reboot to Recovery(TWRP 3.0 and higher is required)
- Wipe System, Cache, Dalvik Cache and Data partition
- Flash rom
- Reboot system
BUGS :
Blackscreen in some video-related apps. You need to manually disable hw overlay in developer options, or flash disable_hw_overlay.zip provided in the download link to auto-disable hw overlay on boot.
Downloads:
Download
Device Tree and Kernel:
Device Tree
Kernel Source
XDA:DevDB Information
SudaMod for Z1 Compact, ROM for the Sony Xperia Z1 Compact
Contributors
maz-1, Hazou, SudaMod Team
Source Code: https://github.com/sudamod
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Testing
Created 2017-09-01
Last Updated 2017-09-09
Hi
Why Russian language is not included?
Screenshots? Features?
jharvey208 said:
Screenshots? Features?
Click to expand...
Click to collapse
Screenshot tab in op, (see attachment)...
@maz-1 I see kernel 3.1. So far only 3.4 kernel builds have had good working camera. Is the camera good? (don't have my Z1c until after the weekend, so can't check). Also, could this kernel work with AOSP? @davidteri91 has built very nice AOSP rom, but with old kernel and bad camera. Hoping for a fix, (I don't think he's interested).
Thanks for new rom...
levone1 said:
Screenshot tab in op, (see attachment)...
@maz-1 I see kernel 3.1. So far only 3.4 kernel builds have had good working camera. Is the camera good? (don't have my Z1c until after the weekend, so can't check). Also, could this kernel work with AOSP? @davidteri91 has built very nice AOSP rom, but with old kernel and bad camera. Hoping for a fix, (I don't think he's interested).
Thanks for new rom...
Click to expand...
Click to collapse
Camera is pretty good, no lag at all, focus works well.
Any feedback on this rom? I can't test for a couple of days...
Testing now, and love it. Reminds me of the good ol' CM days...
levone1 said:
Testing now, and love it. Reminds me of the good ol' CM days...
Click to expand...
Click to collapse
any pics taken by this rom?
nhicko95 said:
any pics taken by this rom?
Click to expand...
Click to collapse
...
nhicko95 said:
any pics taken by this rom?
Click to expand...
Click to collapse
Also, Sony cam port working well - https://forum.xda-developers.com/cr...s-apps/port-stock-camera-nougat-roms-t3628791
levone1 said:
Also, Sony cam port working well - https://forum.xda-developers.com/cr...s-apps/port-stock-camera-nougat-roms-t3628791
Click to expand...
Click to collapse
no need to disable hw
Sent from my amami using XDA Labs
Wonderful ROM, thank you! Only one question - where are the other languages?
NFC working?
new update? oms support?
Sent from my amami using XDA Labs
hermanj said:
NFC working?
Click to expand...
Click to collapse
Just tried it myself: NFC is working!!! I think I'm gonna love this ROM.
FYI: I installed "NFC Tools" app and did read 2 cards with NFC chips inside. They were read OK. I didn't do an actual payment with NFC. Yet.
Also used "NFC check" app. These results are:
NFC check results:
3 pass, 2 fails.
NFC is activated: pass
Android Beam is activated: pass
Hosted Card Emulation is not supported: so a fail
Mifare Classic and Mifare Ultralight cards not supported: so a fail
Android Application Record is supported: pass.
When I install a 5.1.1 ROM, all test are passed.
So I guess the NFC is not working completely yet.
Does it seem OK for daily use? Does Xperia Loops live wallpaper work?
tau45 said:
Does it seem OK for daily use? Does Xperia Loops live wallpaper work?
Click to expand...
Click to collapse
Rom is good for daily use, as far as anyone can tell so far. Report if you find otherwise.
As for Loops, it will never work on this phone - https://forum.xda-developers.com/showpost.php?p=71375427&postcount=26 - unless someone develops some mock version of it, or something...
---------- Post added at 10:19 PM ---------- Previous post was at 10:17 PM ----------
@maz-1 - any updates planned for Sudamod?
Required: Unlocked bootloader?
Does anybody have battery drai nissues with this update?
---------- Post added at 12:48 PM ---------- Previous post was at 12:47 PM ----------
Does anybody have battery drain issues with this update?
I cannot get this ROM booting. Boot animation shows partly but then nothing.
I have unlocked bootloader, flashed latest stock firmware with Emma. Also flashed twrp 3.0.2 as real recovery. I can boot to twrp with power+vol down.
Same problem with several other Nougat ROMs for Z1C. Only ROM so far working is LOS 14 by munjeni.