Develop Bugs

Upgrade problem... 3e error

Hi..
I rooted my Captivate i896 with SuperOneClick.
I can not get past the 3e error signature check for the life of me...
HELP!!!!!!!!!!!!!!!!!
I am using MAC OSX.

guygella said:
Hi..
I rooted my Captivate i896 with SuperOneClick.
I can not get past the 3e error signature check for the life of me...
HELP!!!!!!!!!!!!!!!!!
I am using MAC OSX.
Click to expand...
Click to collapse
Which CWM Recovery are you using ?

v5.0.0.7
optimusodd said:
Which CWM Recovery are you using ?
Click to expand...
Click to collapse

guygella said:
v5.0.0.7
Click to expand...
Click to collapse
I think you need to install mono first as you are on Mac.
http://www.go-mono.com/mono-downloads/download.html
---------- Post added at 12:22 AM ---------- Previous post was at 12:11 AM ----------
Here we go,follow the steps :
>Enable USB debugging on your phone and connect it to your mac
>Download SuperOneClickv1.6.5-ShortFuse from here :http://forum.xda-developers.com/showthread.php?t=803682
>Download "3e_recovery_installer.zip" and "update.zip (1.34 mb)" from here :http://forum.xda-developers.com/showthread.php?t=833423
>Run install.bat from 3e_recovery_installer folder.
>Put update.zip (1.34 mb) in your internal sdcard and boot under recovery.
>Select reinstall package option. Update.zip will get installed and phone will reboot.
>Get the actual CWM recovery update.zip (1.72 mb).You can get this using ROM manager.
>Put this update.zip (1.72 mb) in your internal sdcard and boot under recovery. >Select reinstall package option. Update.zip will get installed and phone will reboot and will be back in recovery mode.
>Select reinstall package again you now have CWM recovery.

Phone is already rooted..
Can not get root access in 3e_recovery_installer program...
PS> I switched to windows.

guygella said:
Hi..
I rooted my Captivate i896 with SuperOneClick.
I can not get past the 3e error signature check for the life of me...
HELP!!!!!!!!!!!!!!!!!
I am using MAC OSX.
Click to expand...
Click to collapse
maybe this thread ?

guygella said:
Phone is already rooted..
Can not get root access in 3e_recovery_installer program...
PS> I switched to windows.
Click to expand...
Click to collapse
Also go through this :
http://forum.xda-developers.com/showthread.php?t=1350266

Hi..
Ok.. I can not get into download mode nor CWM....
Is there a program to force hack its way in ?

Ok...
Bootloop
i9001 and i896 screens over and over and over... also tying to get into download mode... gives me just a battery charging screen...
[email protected]!!!!

guygella said:
Ok...
Bootloop
i9001 and i896 screens over and over and over... also tying to get into download mode... gives me just a battery charging screen...
[email protected]!!!!
Click to expand...
Click to collapse
Are you already rooted ? Do you have "superuser" privilege ?
Run this to make sure:https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en

Rooted. And yes I have superuser status.. IF I can get back in!
optimusodd said:
Are you already rooted ? Do you have "superuser" privilege ?
Run this to make sure:https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
Click to expand...
Click to collapse

guygella said:
Rooted. And yes I have superuser status.. IF I can get back in!
Click to expand...
Click to collapse
Okay,now you have superuser previlege.
Exactly what you want to do now ?
You want to Flash a custom ROM ?

guygella said:
Hi..
Ok.. I can not get into download mode nor CWM....
Is there a program to force hack its way in ?
Click to expand...
Click to collapse
how did you get in this trouble what is your firmware?
now it seems you don't have 3e problem but 3-buttons problem read above link search in page for "3-button"
try to enter recovery by adb tool
Code:
adb reboot recovery
after this quickly remove usb cable from phone

If you tray to install custom ROM
1. Download from market "ROM Manager"
2. Install "ClockworkMod Recovery" or "AmonRa" (have it into ROM Manager)
3. Go to XDA Search and find your phone into forum and find good custom ROM.
4. Download it and paste it to SD card of your phone
5. Power Off phone and press "Home" button + "Power" button to get into Recovery mod and from them you will be ably to install new ROMs ;]
Thanks

I did.
At this point I just want the phone back to ANDROID Ginergerbread OS and operational.
optimusodd said:
Okay,now you have superuser previlege.
Exactly what you want to do now ?
You want to Flash a custom ROM ?
Click to expand...
Click to collapse

guygella said:
I did.
At this point I just want the phone back to ANDROID Ginergerbread OS and operational.
Click to expand...
Click to collapse
would you like to tell us how you solved it ?
see you ..a lot of people want to get experience from this that's the reason we try to contribute here
thanks!

>>>???<<<
Solved what? Go back and read this thread AGAIN!
This issue is NOT solved!
ruscan.calin said:
would you like to tell us how you solved it ?
see you ..a lot of people want to get experience from this that's the reason we try to contribute here
thanks!
Click to expand...
Click to collapse

guygella said:
>>>???<<<
Solved what? Go back and read this thread AGAIN!
This issue is NOT solved!
Click to expand...
Click to collapse
you started to tell us you have a 3e problem but seems you have a 3-buttons problem also you never told us what you did to enter this trouble? have you read the links provided above? be more specific and provide more info!

With ODin.. I loaded two boot loaders over each other...
i9000 and i897 hence why I can not get back into download mode to reflash..
BAsically I have to find a way to force this phone back into download mode.

guygella said:
With ODin.. I loaded two boot loaders over each other...
i9000 and i897 hence why I can not get back into download mode to reflash..
BAsically I have to find a way to force this phone back into download mode.
Click to expand...
Click to collapse
well read this thread as I said i.e. read post #3 and follow instruction this will modify/ patch your recovery so you can access it but you need a Windows machine also you can try to flash back to 2.1 stock rom and follow instructions on post #1 you need a Windows machine...also if you need stock roms for your phone look at
this thread or just enter sammobile and enter "897" as search string you get stock 2.1 rom (you need subscription to download)

[Recovery][CWM]6.0.4.4 for LGE E98x

Hey, guys!
Here is the CWM 6.0.4.4 recovery for our LG Optimus G pro (e98x), both .img and .lok, maybe the fxxx need .img
the name of these recoverys is "geefhd", if your ROM's updater-script doesn't compat this, please pay attention on it
.lok
http://pan.baidu.com/s/1265DP
.img
http://pan.baidu.com/s/1inJ2i
And then, if you are interested of AOSP KitKat, I am working on it for some times, and the bugs now is camera and gps.
My source is here:
https://github.com/airk000/android_device_lge_geefhd-common
https://github.com/airk000/android_device_lge_geefhd_hk

airk000 said:
Hey, guys!
Here is the CWM 6.0.4.4 recovery for our LG Optimus G pro (e98x), both .img and .lok, maybe the fxxx need .img
the name of these recoverys is "geefhd", if your ROM's updater-script doesn't compat this, please pay attention on it
.lok
http://pan.baidu.com/s/1265DP
.img
http://pan.baidu.com/s/1inJ2i
And then, if you are interested of AOSP KitKat, I am working on it for some times, and the bugs now is camera and gps.
My source is here:
https://github.com/airk000/android_device_lge_geefhd-common
https://github.com/airk000/android_device_lge_geefhd_hk
Click to expand...
Click to collapse
how can we use them ?

donalgodon said:
how can we use them ?
Click to expand...
Click to collapse
I modified a TWRP installer with this CWM. Replaced TWRP with CWM on my E986 and it works. Updated adb.exe to work with 4.4.
To install just extract the zip contents and run the batch file.

Isamu_Dyson said:
I modified a TWRP installer with this CWM. Replaced TWRP with CWM on my E986 and it works. Updated adb.exe to work with 4.4.
To install just extract the zip contents and run the batch file.
Click to expand...
Click to collapse
It works. I installed it on 4.4, by the way.
Thanks a lot.

Any chance for a flashable zip file please?

donalgodon said:
It works. I installed it on 4.4, by the way.
Thanks a lot.
Click to expand...
Click to collapse
Is it lokified? Can you flash Madmacks 4.4 KitKat with this recovery?
Thanks in advance.
Erik
Nevermind, I read your signature and you updated it with the new recovery, thanks!
Erik

airk000 said:
Hey, guys!
Here is the CWM 6.0.4.4 recovery for our LG Optimus G pro (e98x), both .img and .lok, maybe the fxxx need .img
the name of these recoverys is "geefhd", if your ROM's updater-script doesn't compat this, please pay attention on it
.lok
http://pan.baidu.com/s/1265DP
.img
http://pan.baidu.com/s/1inJ2i
And then, if you are interested of AOSP KitKat, I am working on it for some times, and the bugs now is camera and gps.
My source is here:
https://github.com/airk000/android_device_lge_geefhd-common
https://github.com/airk000/android_device_lge_geefhd_hk
Click to expand...
Click to collapse
Hi, can someone please mirror these files as it is very difficult to download due to speed

roshandes said:
Hi, can someone please mirror these files as it is very difficult to download due to speed
Click to expand...
Click to collapse
You actually don't need those files, just look at post #3 and download that and run it on you pc with the phone connected.
Erik

ricco333 said:
You actually don't need those files, just look at post #3 and download that and run it on you pc with the phone connected.
Erik
Click to expand...
Click to collapse
Hello there
Just download and run the bat file and done?
I already have cwm v6.0.3.7. Can i just flash it over?

tomi001 said:
Hello there
Just download and run the bat file and done?
I already have cwm v6.0.3.7. Can i just flash it over?
Click to expand...
Click to collapse
No, you can't flash those files, but if you want to update CWM, why don't you install Philz recovery for the e980, it is great.
Erik

ricco333 said:
No, you can't flash those files, but if you want to update CWM, why don't you install Philz recovery for the e980, it is great.
Erik
Click to expand...
Click to collapse
The problem is i have the e986.

is there a way i can flash this recovery? I installed PhilZi's recovery and my phone is messed up. I forgot to enable loki support and flash a rom, and then my phone is only booting to recovery. the system folder is always empty whatever i flashed. there is something wrong with my phone, so that i also cannot flash a kdz file. it always return error.
my only chance of getting the phone back is to flash the recovery. can anyone help me with that pls?

spiderx_mm said:
is there a way i can flash this recovery? I installed PhilZi's recovery and my phone is messed up. I forgot to enable loki support and flash a rom, and then my phone is only booting to recovery. the system folder is always empty whatever i flashed. there is something wrong with my phone, so that i also cannot flash a kdz file. it always return error.
my only chance of getting the phone back is to flash the recovery. can anyone help me with that pls?
Click to expand...
Click to collapse
Bro please don't flash CWM now it will be of no use after reboot you will return back to recovery only.. first go for TWRP.. get the rom flashed & then if you required go for CWM..

roshandes said:
Bro please don't flash CWM now it will be of no use after reboot you will return back to recovery only.. first go for TWRP.. get the rom flashed & then if you required go for CWM..
Click to expand...
Click to collapse
how can i get TWRP? my phone can only go in to PhilZi's recovery, and my /system folder is already empty. i can't get anywhere

spiderx_mm said:
how can i get TWRP? my phone can only go in to PhilZi's recovery, and my /system folder is already empty. i can't get anywhere
Click to expand...
Click to collapse
Go here : http://d-h.st/HNa
Uploaded by : ballshanglow
just download it & put in your card or in phone using recovery mount usb options..after that flash & enjooooy..

roshandes said:
Go here : http://d-h.st/HNa
Uploaded by : ballshanglow
just download it & put in your card or in phone using recovery mount usb options..after that flash & enjooooy..
Click to expand...
Click to collapse
thanks, I'll try.
update: ... now I can boot into TWRP. and it is not reading my 32GB External SD card where i put all the Roms and nandroid backup. ...
more updates ... somehow I found a downloaded OTA zip file from CM11. I'm flashed it and booting now.
Thanks a lot for saving my neck bro.

hiii .
.i can used for e988 v20a ??

Please help I'm using E988 hongkong, how can I flash the right recovery to able to flash custom 4.4 rom?
Thank you guys

roshandes said:
Go here : (Link deleted because no 10 Posts)
Uploaded by : ballshanglow
just download it & put in your card or in phone using recovery mount usb options..after that flash & enjooooy..
Click to expand...
Click to collapse
I have a e986 german with Stock 20a EU 4.4.2
If I installed cwm it gives me a boot loop into recovery. So I must install my rom via kdz tool and so I have no recovery yet. I found no way to flash a working recovery and unlock bootloader for my phone.
Can I flash this under e986eu20a?

nunuc said:
I have a e986 german with Stock 20a EU 4.4.2
If I installed cwm it gives me a boot loop into recovery. So I must install my rom via kdz tool and so I have no recovery yet. I found no way to flash a working recovery and unlock bootloader for my phone.
Can I flash this under e986eu20a?
Click to expand...
Click to collapse
I have send you a PM.

[Q] Phone does not boots up

Phone can boot into download mode, but can't boot into Recovery or OS.
i want to flash a custom recovery and ROM, but have no idea how

First try to fix your problem by flashing the firmware. Hopefully you can enter the system or recovery afterwards.

@godig what have you done before? Did you try to install any custom rom, is that your case try to flash again the stock rom!

ismael0301 said:
@godig what have you done before? Did you try to install any custom rom, is that your case try to flash again the stock rom!
Click to expand...
Click to collapse
i have flashed repair zip by this tutorial http://forum.xda-developers.com/showthread.php?t=2751224, still same, an't boot into recovery either OS, just download mode

zgodig said:
i have flashed repair zip using odin, still same, an't boot into recovery either OS, just download mode
Click to expand...
Click to collapse
Well download an stock ROM and flash it via Odin that will solve. An advice do not flash anything if you don't have a backup, and do not flash nothing to your phone if is not for your phone!
Good Luck!

ismael0301 said:
Well download an stock ROM and flash it via Odin that will solve. An advice do not flash anything if you don't have a backup, and do not flash nothing to your phone if is not for your phone!
Good Luck!
Click to expand...
Click to collapse
if you can provide me links i would be very thankful.

Wish phone you own? And model!

ismael0301 said:
Wich phone you own? And model!
Click to expand...
Click to collapse
Samsung galaxy s4 mini GT-I9195

zgodig said:
Samsung galaxy s4 mini GT-I9195
Click to expand...
Click to collapse
Here dude you enter your model and it will show the the version available, you can use the 4.2.2 or 4.4.2! I recomend the 4.4.2 (if you see any error after you flash the ROM, flash it again!
http://www.sammobile.com/firmwares/

ismael0301 said:
Here dude you enter your model and it will show the the version available, you can use the 4.2.2 or 4.4.2! I recomend the 4.4.2 (if you see any error after you flash the ROM, flash it again!
http://www.sammobile.com/firmwares/
Click to expand...
Click to collapse
how to flash it using odin?

zgodig said:
how to flash it using odin?
Click to expand...
Click to collapse
Yeah with Odin! Its just one file its easy there is a little guide!

ismael0301 said:
Yeah with Odin! Its just one file its easy there is a little guide!
Click to expand...
Click to collapse
i get an error on my phone.
ODIN: Invalid ext4 image

zgodig said:
i get an error on my phone.
ODIN: Invalid ext4 image
Click to expand...
Click to collapse
Well try to download again or use another like russia version!! If you flash the russia version flash it two times!

ismael0301 said:
Well try to download again or use another like russia version!! If you flash the russia version flash it two times!
Click to expand...
Click to collapse
i get the same error on my phone.

zgodig said:
i get the same error on my phone.
Click to expand...
Click to collapse
Well are you extracting the file from the zip you downloaded?

ismael0301 said:
Well are you extracting the file from the zip you downloaded?
Click to expand...
Click to collapse
yes. i do as it says in explanation

zgodig said:
yes. i do as it says in explanation
Click to expand...
Click to collapse
Try another Odin but from other source or try in another computer try to reinstall drivers again!

ismael0301 said:
Try another Odin but from other source or try in another computer try to reinstall drivers again!
Click to expand...
Click to collapse
still the same

zgodig said:
still the same
Click to expand...
Click to collapse
have you tried to flash the 4.2.2 version? Take one of those 4.2.2 no matter the country, but flash a 4.2.2 version!

zgodig said:
still the same
Click to expand...
Click to collapse
When you are in download mode, plug the phone to PC and check if Odin is able to detect it
If not, install samsung drivers or samsung kies and try again
Then, download this firmware: http://www.sammobile.com/firmwares/3/?download=32162
After download, extract ZIP and don't rename the file with 'tar.md5' extension
Then try to flash it through Odin and wait...
If you flash was done correctly, phone will boot
If you get bootloop, reboot in recovery and make a wipe data/factory reset
Good luck
---------- Post added at 04:19 PM ---------- Previous post was at 04:18 PM ----------
ismael0301 said:
have you tried to flash the 4.2.2 version? Take one of those 4.2.2 no matter the country, but flash a 4.2.2 version!
Click to expand...
Click to collapse
Maybe he already flashed a 4.4 version... and now he can't install 4.2...
It is better for him to try a 4.4 from now on...

Problem with CWM and Flashing Custom Roms

Hey guys i need some help. I took out my old Galaxy Grand Duos and thought about rooting it to get Android Kitkat ( I have an International version which has never been rooted before ). I rooted it successfully however I am facing problem with the CWM recovery. When i first installed it I was getting the 'No Command" error. I read on XDA that I need to perform a battery pull in order to get the CWM working. I did that and it worked but it only works when I use odin to flash it. Otherwise when ever I enter recovery I get the 'No Command' error. What should I do?
Secondly im trying to install this rom http://forum.xda-developers.com/showthread.php?t=2563557 . When i get the CWM working (by flashing it with Odin) there seems to be an error which prevents me from flashing this rom. The message I get is *Cant install this package on top of incapable data. Please try another package or run a factory reset. Error in (the file location and name) (Status 7) Installation aborted*
Thanks in advance

Can u tell us how did u root ur phone?

Trilochanaaya said:
Can u tell us how did u root ur phone?
Click to expand...
Click to collapse
Thanks for the reply and sure. Here is the link
http://www.youtube.com/watch?v=jm1ssFkEaN0

metalmouth22 said:
Thanks for the reply and sure. Here is the link
http://www.youtube.com/watch?v=jm1ssFkEaN0
Click to expand...
Click to collapse
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/galaxy-grand-duos/development/recovery-twrp-t2839237
http://forum.xda-developers.com/showthread.php?t=2437182
http://forum.xda-developers.com/showthread.php?t=2725019

Trilochanaaya said:
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/show....php?t=2437182
http://forum.xda-developers.com/gala...-twrp-t2839237
http://forum.xda-developers.com/show....php?t=2725019
Click to expand...
Click to collapse
Thanks, ill try this right now. Btw before making this thread i tried to download CWM's latest version from its website but it was not downloading properly. I guess the download file was incomplete.

Trilochanaaya said:
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/show....php?t=2437182
http://forum.xda-developers.com/gala...-twrp-t2839237
http://forum.xda-developers.com/show....php?t=2725019
Click to expand...
Click to collapse
These links are not working =/

metalmouth22 said:
These links are not working =/
Click to expand...
Click to collapse
Check now. Links fixed!

//SM-N920A\\ **N920AUCU4EQC6 NOUGAT Full Odin** - Links UP

Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Here are Odin 3.12.3
Good Luck.

Of course, this will wipe my device again, even though I do not select the CSC?

If you allow it to flash a new system and user data image then yes.
You basically need a wipe anyways going from MM to Nougat.
Sent from my Galaxy Note5 using XDA Labs

I'm already on Nougat N920AUCU4EQC5. I'm just trying to avoid having to wipe my phone

When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?

norbarb said:
Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Good Luck.
Click to expand...
Click to collapse
thank you very much for the link, bro.. i'm already Nougated now. experiencing some blue screen, but when i'm using newest odin.. all fixed.. thx again, man, you are the best.

DuganNash said:
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
Click to expand...
Click to collapse
You may use wrong odin, some security installed on your phone, What build are you on?

norbarb said:
You may use wrong odin, some security installed on your phone, What build are you on?
Click to expand...
Click to collapse
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.

DuganNash said:
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
Click to expand...
Click to collapse
Can you post your about phone screen ?

norbarb said:
Can you post your about phone screen ?
Click to expand...
Click to collapse
here you go, thank you

DuganNash said:
here you go, thank you
Click to expand...
Click to collapse
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?

norbarb said:
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
Click to expand...
Click to collapse
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again

DuganNash said:
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
Click to expand...
Click to collapse
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.

norbarb said:
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
Click to expand...
Click to collapse
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives

You're the man !! just the files Odin I was looking for. I want to marry with you ... make me a son jajaja

DuganNash said:
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
Click to expand...
Click to collapse
You have to necessarily erase the security lock fingerprints, you also have to remove the password lock, you have not any type of security lock, then you have to enable developer options and type USB debugging(This last one I do not know if it is strictly necessary, but just in case)If you have some security lock on your phone, even if you pray, you will not be able to!

After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks

TaimooR Khawaja said:
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
Click to expand...
Click to collapse
What did you flash before this stock firmware?
DRK=device root key
Clicking from Edge of Galaxy

Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.

mattern1974 said:
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
Click to expand...
Click to collapse
Same here.. i try to flash it via odin v3.12 it showing pass message..
After reboot my phone still on MM 6.0.1