Related
Hi guys! This bootloader unlock version is only for ARGENTINIAN models.
You can donate me (PAYPAL LINK COMING SOON) and @cerg2010cerg2010 through paypal.
@cerg2010cerg2010 PAYPAL EMAIL: [email protected] OR QIWI: +79157840294
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
No more secure boot error!
I thank my friend @cerg2010cerg2010 for helping me out in patching the aboot.
Supported Model:
Code:
H440AR
-> Steps:
(1) Downgrade to v10a or v10d version of Android.
(2) Root your device.
(3) Download this patched aboot file. Click Here for v10a. Click Here for v10d.
(4) Connect your phone to the computer. In command prompt, type "adb shell".
(5) Transfer the aboot file into /sdcard/ folder.
(6) Type "su" to enter the root shell. Then type "dd if=/sdcard/<file_name_you_downloaded_in_3rd step> of=/dev/block/<your aboot partition>".
(7) Restart your phone by typing "reboot".
You have unlocked your bootloader!
Refer Notes for more information.
-> Notes:
1) The aboot_5120_patched.bin or aboot_10d_patched.bin is the patched version of aboot partition of your device. Secure boot validation has been patched such that secure boot is always valid, so you can flash your own TWRP and Custom ROM.
2) Don't upgrade to any updated version of Android if you get any through OTA update. It might brick your device.
I'll give it a try soon, hopefully if the guys here are correct 4g/lte should work now. Thanks a lot!
Edit: apparently this fixed the issue regarding LTE using argentinian bands, I'll keep testing it but so far it holds even after a call and a low signal area it just switches from lte to 3g and so on (which wasn't working with the other aboot)
Korelev said:
I'll give it a try soon, hopefully if the guys here are correct 4g/lte should work now. Thanks a lot!
Edit: apparently this fixed the issue regarding LTE using argentinian bands, I'll keep testing it but so far it holds even after a call and a low signal area it just switches from lte to 3g and so on (which wasn't working with the other aboot)
Click to expand...
Click to collapse
Thanks for confirming!
You did it!!!! Many Many Thanks!!!! T.T
69PerTTu69 said:
You did it!!!! Many Many Thanks!!!! T.T
Click to expand...
Click to collapse
Hey, I'm trying to download the Argentinean aboot, but the link is dead. Can anyone help me with it ?
mayankjet said:
Hey, I'm trying to download the Argentinean aboot, but the link is dead. Can anyone help me with it ?
Click to expand...
Click to collapse
They aren't broken
69PerTTu69 said:
They aren't broken
Click to expand...
Click to collapse
My bad.
links are not working for me
edit: apparently they are now
Quick question: by unlocking the bootloader I should be able to later flash a custom recovery and then root the phone, right? As the argentinian version seems to be unrootable via kingroot (which is what the general thread recommends). Do I got this right, or is there a simple version to root it? Thanks.
Kon22 said:
Quick question: by unlocking the bootloader I should be able to later flash a custom recovery and then root the phone, right? As the argentinian version seems to be unrootable via kingroot (which is what the general thread recommends). Do I got this right, or is there a simple version to root it? Thanks.
Click to expand...
Click to collapse
First you need to be on Lollipop.
Root it by using Kingroot.
Unlock the bootloader.
Flash TWRP 3.1.1.0
Flash MM v20b zip proposed by Korelev.
Flash Supersu.
Now you have a rooted MM.
walterfuster said:
First you need to be on Lollipop.
Root it by using Kingroot.
Unlock the bootloader.
Flash TWRP 3.1.1.0
Flash MM v20b zip proposed by Korelev.
Flash Supersu.
Now you have a rooted MM.
Click to expand...
Click to collapse
I tried rooting it using Kingroot with no success, both with the APK and the app on PC. Running stock lollipop, obviously. I assumed the argentinian version (H440AR) couldn't be rooted via kingroot, which is why I'm wondering if the only way is to simply unlock bootloader, flash TWRP and then flash SuperSU.
Kon22 said:
I tried rooting it using Kingroot with no success, both with the APK and the app on PC. Running stock lollipop, obviously. I assumed the argentinian version (H440AR) couldn't be rooted via kingroot, which is why I'm wondering if the only way is to simply unlock bootloader, flash TWRP and then flash SuperSU.
Click to expand...
Click to collapse
The thing is, you can't unlock the bootloader without first having su permissions.
AR device version shouldn't be a problem.
Mine is Argentinian too and I easily rooted it.
Try with an older version of Kingroot. You can easily find it around apk's sites.
If no luck, try flashing an H440N kdz (I'm on POL v10i) with LG Flash Tool 2014, and see what happens.
You can do a dirty flash if you don't want to lose your data.
P.S.: I even switched from Kingroot to SuperSU. I highly recommend this. Kingroot converts your phone in a turtle.
walterfuster said:
The thing is, you can't unlock the bootloader without first having su permissions.
AR device version shouldn't be a problem.
Mine is Argentinian too and I easily rooted it.
Try with an older version of Kingroot. You can easily find it around apk's sites.
If no luck, try flashing an H440N kdz (I'm on POL v10i) with LG Flash Tool 2014, and see what happens.
You can do a dirty flash if you don't want to lose your data.
P.S.: I even switched from Kingroot to SuperSU. I highly recommend this, Kingroot convert your phone in a turtle.
Click to expand...
Click to collapse
Huh, that's odd then, that Kingroot couldn't do it. I'll keep looking into it, then. Thanks for the help, will report back.
walterfuster said:
The thing is, you can't unlock the bootloader without first having su permissions.
AR device version shouldn't be a problem.
Mine is Argentinian too and I easily rooted it.
Try with an older version of Kingroot. You can easily find it around apk's sites.
If no luck, try flashing an H440N kdz (I'm on POL v10i) with LG Flash Tool 2014, and see what happens.
You can do a dirty flash if you don't want to lose your data.
P.S.: I even switched from Kingroot to SuperSU. I highly recommend this. Kingroot converts your phone in a turtle.
Click to expand...
Click to collapse
Hello there. I managed to use kingroot to root one of the two spirits I have (the other one still doesn't budge, for whatever reason) and indeed it turns the phone into a turtle. I was wondering, is it possible to flash superSU without flashing marshamallow before? Not that I'd mind flashing it, but without the ability to use an SD card as internal storage the main advantage is gone, and I wouldn't wanna have MM if it hurts battery time or fluidity of the phone.
Kon22 said:
Hello there. I managed to use kingroot to root one of the two spirits I have (the other one still doesn't budge, for whatever reason) and indeed it turns the phone into a turtle. I was wondering, is it possible to flash superSU without flashing marshamallow before? Not that I'd mind flashing it, but without the ability to use an SD card as internal storage the main advantage is gone, and I wouldn't wanna have MM if it hurts battery time or fluidity of the phone.
Click to expand...
Click to collapse
If I don't get wrong, you want to stay on a SuperSU rooted LP, right?
Well, you can get that, not by flashing, but by replacing Kingroot with SuperSU.
you'll have to do the following:
https://forum.xda-developers.com/a3...place-kingroot-kinguser-t3308989/post65167979
P.S.: If you decide to stay on LP for definitely, I highly recommend you apply the Tomo's tweaks.
They get the most of Spirit running LP:
https://forum.xda-developers.com/lg...formance-battery-saving-t3217133/post63121297
So if I get this right I should be able to use custom roms after doing this procedure? I've been asking about in the LOS14.1 rom thread but people talking about a bluescreen when they ran out of signal in the argentinian model scared me off. I cant get a new phone atm in case I brick this one. Nobody could give me a definitive answer about it so far.
Niku200 said:
So if I get this right I should be able to use custom roms after doing this procedure? I've been asking about in the LOS14.1 rom thread but people talking about a bluescreen when they ran out of signal in the argentinian model scared me off. I cant get a new phone atm in case I brick this one. Nobody could give me a definitive answer about it so far.
Click to expand...
Click to collapse
Yes, following this procedure can get your bootloader unlocked. Also LOS does have that blue scrren error, only if you don't have network service. However it's not that big of a issue. You can prevent blue screen by using airplane mode.
mayankjet said:
Yes, following this procedure can get your bootloader unlocked. Also LOS does have that blue scrren error, only if you don't have network service. However it's not that big of a issue. You can prevent blue screen by using airplane mode.
Click to expand...
Click to collapse
I knew about that workaround but signal is pretty unstable where I live. Specially when I travel and I like to use spotify while doing so. I'd like to avoid it as much as I can. I guess I'll give it a go and if it fails I can go back flashing a stock firmware.
Niku200 said:
I knew about that workaround but signal is pretty unstable where I live. Specially when I travel and I like to use spotify while doing so. I'd like to avoid it as much as I can. I guess I'll give it a go and if it fails I can go back flashing a stock firmware.
Click to expand...
Click to collapse
Okay.
So, I've been trying to download this several times but I'm always hit with a trafic limit from the person who shared it. Would somebody share me the files somehow?
Here, I shall guide you how to easily enable Android Camera2 API needed for Google Camera (Gcam) app and any other camera apps with advanced manual settings.
This trick requires custom recovery either TWRP or*RWRP*only for booting (without being installed).
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
REQUIREMENTS:
The Device, of course!
Unlocked bootloader.
ADB Driver Installer.
Red Wolf Recovery (RWRP) for Vince.
A Windows-based computer.
A*USB*data*cable.
Step 1 – Install the Minimal Fastboot and ADB Driver on your computer.
Step 2 – Extract the*RWRP*package. You should get a file called “RedWolf-Vince-3.x.x.img“.
Step 3 – Now copy that file to the adb folder.
Step 4 – Next, rename the file from “RedWolf-Vince-3.x.x” to “rwrp“. Note: Commonly Windows does not display the file extension (.img).
Step 5 – Still at the adb folder, launch the command prompt window from that location. Simply hold down the*Shift button*on the keyboard and right-click on any blank area in Windows Explorer (inside the adb folder). Then choose Open PowerShell/Command Prompt Window option
Step 6 – Enable USB Debugging option on your phone.
Step 7 – Now issue the following command correspondingly (type the command and hit Enter):
Code:
adb devices
adb reboot bootloader
fastboot devices
fastboot boot rwrp.img
adb shell
setprop persist.camera.HAL3.enabled 1
setprop persist.camera.eis.enable 1
exit
adb reboot bootloader
fastboot reboot
Congratulations! You have enabled Camera2 API without losing the ability to receive MIUI OTA Update since you do not flash any custom recovery.
If you got help from this guide and/or liked it hit that Thanks button below. It makes me happy
Thank you.
It's working on the Redmi Note 5 Global (WHYRED) aswell.
You have to use this RWRP version:
https://forum.xda-developers.com/redmi-note-5-pro/development/recovery-red-wolf-recovery-project-t3766997
camerlengo said:
Thank you.
It's working on the Redmi Note 5 Global (WHYRED) aswell.
You have to use this RWRP version:
https://forum.xda-developers.com/re...t/recovery-red-wolf-recovery-project-t3766997
Click to expand...
Click to collapse
Well, that's nice to hear that it works on whyred as well!
Can you confirm that on which ROM or miui version it is working?
Will it work on vince latest miui 10 global beta?? Pls confirm and if it does enable camera 2 api I won't lost it in future updates right? Or will it get disabled if I install future updates?and it won't brick my device? Right?
Cannot enable camera2api by using this method on latest MIUI 10 8.7.26. However this method is works on MIUI 9
buddhatrip said:
Cannot enable camera2api by using this method on latest MIUI 10 8.7.26. However this method is works on MIUI 9
Click to expand...
Click to collapse
Oh ohkay
buddhatrip said:
Cannot enable camera2api by using this method on latest MIUI 10 8.7.26. However this method is works on MIUI 9
Click to expand...
Click to collapse
Can you confirm that it doesn't work on miui 10 8.7.26?
kartik676 said:
Will it work on vince latest miui 10 global beta?? Pls confirm and if it does enable camera 2 api I won't lost it in future updates right? Or will it get disabled if I install future updates?and it won't brick my device? Right?
Click to expand...
Click to collapse
You did get the answer.
Yes it does work, but unfortunately not on latest miui 10 beta.
There's no harm in enabling it.
If you get stuck you can always use mi flash to revert back
thanks you, its work
but will i lose this patch when i update to miui 10 ?
androidland said:
thanks you, its work
but will i lose this patch when i update to miui 10 ?
Click to expand...
Click to collapse
Yes, it cannot persist over ota, so you will lose it if you update to miui 10.
But wait, how will you do that?- Miflash tool or normally update via OTA?
AndroBuddy007 said:
Yes, it cannot persist over ota, so you will lose it if you update to miui 10.
But wait, how will you do that?- Miflash tool or normally update via OTA?
Click to expand...
Click to collapse
normaly update via OTA
i wait until miui 10 global final stable
so when i update to miui 10 later via OTA, i will lose this patch ?
and i can not do this patch any more in miui 10 ?
androidland said:
normaly update via OTA
i wait until miui 10 global final stable
so when i update to miui 10 later via OTA, i will lose this patch ?
and i can not do this patch any more in miui 10 ?
Click to expand...
Click to collapse
Yes you will lose this patch on miui 10.
You should be able to use it in miui 10 easily.
And since it will be a global STABLE version, it will work like a charm just as it does in miui 9. Still let's see what Xiaomi does.
Till then enjoy!
Is there any way to unlock Bootloader without loose data? Thanks.
stavrakas2007 said:
Is there any way to unlock Bootloader without loose data? Thanks.
Click to expand...
Click to collapse
I unlocked my BL without losing any data. BUT.... that was 3-4 months ago when there was no such restriction. Now if you unlock your phone, you will lose data.
But you can backup your data in settings<additional settings<backup and reset. Copy those files to your PC. Restore it when you unlock your phone.
Remember that this thread is not for posting such questions, for your question you can google it or search xda. Don't be lazy.
AndroBuddy007 said:
I unlocked my BL without losing any data. BUT.... that was 3-4 months ago when there was no such restriction. Now if you unlock your phone, you will lose data.
But you can backup your data in settings<additional settings<backup and reset. Copy those files to your PC. Restore it when you unlock your phone.
Remember that this thread is not for posting such questions, for your question you can google it or search xda. Don't be lazy.
Click to expand...
Click to collapse
Thanks.
Any issue with anti rollback or bootloop issue?
camerlengo said:
Thank you.
It's working on the Redmi Note 5 Global (WHYRED) aswell.
You have to use this RWRP version:
https://forum.xda-developers.com/redmi-note-5-pro/development/recovery-red-wolf-recovery-project-t3766997
Click to expand...
Click to collapse
Do i need to Flash lazy flasher, after completing this process.
I am on 8.8.2 Global Beta on my redmi note 5 pro.
Thanks
mp4154 said:
Do i need to Flash lazy flasher, after completing this process.
I am on 8.8.2 Global Beta on my redmi note 5 pro.
Thanks
Click to expand...
Click to collapse
Ugh well.... This thread and forum is for REDMI note 5 Vince not pro (whyred).
But I must say that lazy flasher is not needed coz here we are using setprop commands and hence not flashing any mod. So lazy flasher just doesn't come to play here!
Try it out and reply me if you succeeded in enabling the API on your whyred. Remember to just keep Lazy flasher in handy.
Whenever I enter twrp, it always asks for decrypt password. Is there any other way to boot into twrp without formatting data?
pyrohalo90 said:
Whenever I enter twrp, it always asks for decrypt password. Is there any other way to boot into twrp without formatting data?
Click to expand...
Click to collapse
No.
That's why I mentioned RWRP as alternative.
This doesn't work on miui 10 any help on how to do it?
hello, have problem with my phone, after software update, in next day I got this "your device is corrupt. It can't be trusted and will not boot " . please help me fixt it problem if its possible. thanks
have you tried the MSM tool?
OP9Pro - Repository of MSM Unbrick Tools (TMO, EU, GLO, IN)
By using these tools, you accept full responsibility for your actions. Your warranty is void should you run any of these utilities without OnePlus support present. I am not responsible for bricks, fires, nuclear war, etc. If you modified any...
forum.xda-developers.com
grinch247 said:
have you tried the MSM tool?
OP9Pro - Repository of MSM Unbrick Tools (TMO, EU, GLO, IN)
By using these tools, you accept full responsibility for your actions. Your warranty is void should you run any of these utilities without OnePlus support present. I am not responsible for bricks, fires, nuclear war, etc. If you modified any...
forum.xda-developers.com
Click to expand...
Click to collapse
still not try, because 1 hr ago I write to OnePlus support, but answer was "please wait 24hr from us, via email" , and this phone is more than 30days I have,
avid_droid said:
Have you manually flashed any .img files? Usually that happens when cross flashing .img files
Click to expand...
Click to collapse
never, to me start phone after update, he self shutdown, or restart, or stuck, now , today got this message on phone dispaly
egyda666 said:
still not try, because 1 hr ago I write to OnePlus support, but answer was "please wait 24hr from us, via email" , and this phone is more than 30days I have,
Click to expand...
Click to collapse
The MSM Tool will fix it, thats the same thing OnePlus will do when they email you back.
jammin6996 said:
The MSM Tool will fix it, thats the same thing OnePlus will do when they email you back.
Click to expand...
Click to collapse
can get video or like that help tips, how need do with it msmtool?
IDK for me apps crash suddenly and return to home page
Everything is on this site
It's very easy to do
Root a32 4G
Tutorial - Root - Samsung Galaxy A32 (SM-A325MDS)
- Novo 15/05/2023 TWRP para Samsung Galaxy A32 A32 (SM-A325MDS) https://forum.xda-developers.com/t/recovery-a325x-stable-ish-unofficial-...
limitesdownloads.blogspot.com
[Recovery] [A325x] [Stable-ish, Unofficial] TWRP 3.7.0_12.1 - Galaxy A32 4G
#include #include /* * Your warranty is... still valid? * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some...
forum.xda-developers.com
There´s serious risk to loose IMEI many days after root
edukardo said:
There´s serious risk to loose IMEI many days after root
Click to expand...
Click to collapse
that was before. its fixed now. i have been using gsi + magisk even magisk + one ui for over a year now. thankgod i didnt root when magisk had this bug. its working fine now till to this day
Good news!
Magisk team fixed it?
edukardo said:
Good news!
Magisk team fixed it?
Click to expand...
Click to collapse
i think it was fixed since long ago. just make sure you install magisk 25.2 earlier versions still may have the bug
Captain_cookie_200 said:
i think it was fixed since long ago. just make sure you install magisk 25.2 earlier versions still may have the bug
Click to expand...
Click to collapse
magisk 23 and magisk 25.2 does not present the NVRAM mount bug and are safe
Are you sure it was fixed? I lost IMEI two month after using it without issues
edukardo said:
Are you sure it was fixed? I lost IMEI two month after using it without issues
Click to expand...
Click to collapse
i have been using it for a year. now either a software update did that. or u installed older version of magisk. But backup your efs just incase
Captain_cookie_200 said:
i have been using it for a year. now either a software update did that. or u installed older version of magisk. But backup your efs just incase
Click to expand...
Click to collapse
efs has nothing to do with the issue at all, plus backuping the right directory is only useful before the first time the imei is lost.
applesucksLmao said:
efs has nothing to do with the issue at all, plus backuping the right directory is only useful before the first time the imei is lost.
Click to expand...
Click to collapse
i remember when i lost my imei. guess what fixed it? i actually went in backed up my efs and just deleted the entire efs folder. and on next reboot it fixed itself
im sorry for the inexpertise, this is literally the first phone i ever had and im not familiar with this at all.
i tried to install LineageOS, i accidentally updated to a12 and the build only supportis a11. my phone is bootlooped and locked. it will exclusively start on bootloader and all boots will go there no matter what. the official OS is wiped.
so all methods require manually putting the files inside the phone and this is not possible on bootloader because pc wont recognize the phone as a device, so you cant transfer files.
in this cases, how do you install A11 on the phone? what can i do to recover access to the phone? THERE IS NO OS RIGHT NOW
glowyemmanuel said:
im sorry for the inexpertise, this is literally the first phone i ever had and im not familiar with this at all.
i tried to install LineageOS, i accidentally updated to a12 and the build only supportis a11. my phone is bootlooped and locked. it will exclusively start on bootloader and all boots will go there no matter what. the official OS is wiped.
so all methods require manually putting the files inside the phone and this is not possible on bootloader because pc wont recognize the phone as a device, so you cant transfer files.
in this cases, how do you install A11 on the phone? what can i do to recover access to the phone? THERE IS NO OS RIGHT NOW
Click to expand...
Click to collapse
Seaech for MSMDownloader, you'll find it here on this thread it will reinstall everything from scratch
As what @Chinaroad said, the MSM tool is the way to go.
OP9Pro - Repository of MSM Unbrick Tools (TMO, EU, GLO, IN)
By using these tools, you accept full responsibility for your actions. Your warranty is void should you run any of these utilities without OnePlus support present. I am not responsible for bricks, fires, nuclear war, etc. If you modified any...
forum.xda-developers.com
Chinaroad said:
Seaech for MSMDownloader, you'll find it here on this thread it will reinstall everything from scratch
Click to expand...
Click to collapse
hallo dare said:
As what @Chinaroad said, the MSM tool is the way to go.
OP9Pro - Repository of MSM Unbrick Tools (TMO, EU, GLO, IN)
By using these tools, you accept full responsibility for your actions. Your warranty is void should you run any of these utilities without OnePlus support present. I am not responsible for bricks, fires, nuclear war, etc. If you modified any...
forum.xda-developers.com
Click to expand...
Click to collapse
thank you both. one thing that worries me is the red warning, no partition was ever touched by MSM because i never used it. so under the circumstances i posted, is a hard brick possible? i want to be totally sure before proceeding
glowyemmanuel said:
thank you both. one thing that worries me is the red warning, no partition was ever touched by MSM because i never used it. so under the circumstances i posted, is a hard brick possible? i want to be totally sure before proceeding
Click to expand...
Click to collapse
Maybe, but MSM will flash all the partitions, you'll loose your data obviusly, but you'll get your phone alive again it will be like you just bought it