Hi all. I´ve got this tablet: Arnova 10 G1 - rooted. I have a problem with booting. When it starts, it keeps rebooting on boot screen. I can´t go into the recovery mode :crying:. I've got these buttons: Volume Up ´, Volume Down, reset button and power button. I have 2 USB ports. One large and one small USB port (microUSB).When I connect to PC, It doesn t recognize it. ´ I had connected the two USB ports.I do not know what further. Thank you very much for your help.
Related
hello, i am looking for help with a problem. i have 2 galaxy s 2 phones. i have a windows 7 machine with drivers installed. the weird part is that my phone is recognized with my computer with no problem. my wife's phone on the other hand does nothing. i mean nothing.. the only thing it will do is charge the phone. i have tried everything but nothing works with this phone. the other problem is that i can't put it in download mode. i hold vol+ and vol- and plug the cable in but it does nothing. i also tried volume down + home button and power at same time with no success. it just boots up like normal or goes into recovery. this is crazy!!! i do know it's not the drivers because the other phone is recognized. any help would be great. i have been at this for 8 hours and counting...
hi,
any help is hugely appreciated.
I wiped my phone in recovery with the option to wipe for new custom rom, this worked fine. when i went to install custom rom it failed and then turned itself off. now the phone just gets stuck at the Sony logo. the only way i can turn it off is via the red button in the sim slot.
I am unable to connect to the computer at all, no fastboot. I'm also unable to boot into recovery to restore.
Please help. Hope i haven't ****ed it up beyond fixing
Thanks
Flash a stock ftf with flashtool (in flashmode). You should definitely get into flashmode and fastboot, otherwise there is a problem with your computer.
Funny, I didn't even know there was a red button Holding Volume Up + Power for a few seconds always worked for me, no matter in which state the phone was.
Hi all,
I've exactely the same problem !!!
My phone stuck to Sony logo, and not reconyze on my 3 PC.... before that, usb connexion work fine on all PC, but now.... nothing
I've just POWER + and VOL+ (its power off the phone), i've no led color light
I've try flashboot, but not detect my phone
i've try to install :
flashtool-0.9.16.1-windows (not detected)
Flashtool-drivers-1.5-20140318 (my computer doesnt not see my phone)
Xperia_Z1_Compact_driver (my computer doesnt not see my phone too)
I can't go into Flashmode...
When i power off my Z1c, and i plug usb + (vol+) nothing appear...stuck Sony logo...
I'm lost... I need your help XDA members ! just U can help me
PS : the red button is in the SIM slot, but i think is same POWER + (VOL+).... its power off the phone
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Iruwen said:
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Click to expand...
Click to collapse
THX for your response !
Sorry it's a mistake....
I've try both (vol+ and USB) and (vol- and USB).... but no sound (device not detected), in device manager nothing appear too.
I've make a fresh install of windows 7 x64 on another PC.
I finaly working to boot (2-3 times) with Vol- + USB cable, but stay in sony logo and Flashtool whait for device...
Please i need u're help beacause i'm really lost (usualy i flash many phone S4, Mediatek, phones, etc...) but now i dont find solution
My problem come from the original cable
All this because of the USB cable does not work ... CRAZY !
This USB cable is new and original sony... just 2 Weeks
I solved my problem with new one
That's unfortunate, good you found the issue.
Hello,
I have a problem with my phone : Samsung J6+ (SM-J610FN/DS)
I have crached a flashing Rom with Odin and I'm sure it is because of that my phone can't start by pressing the power button.
Now my phone has the message : An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software ...
The thing is that it is rebooting and looping without end every 2 seconds on that green screen with that message ...
Only thing I can do is, with the USB cable connected, when the green screen is up, I can push VOL down + VOL up and I can go in download mode.... Then I can push on VOL up but right after the phone reboot in loop again and again ...
Another thing is that without USB cable connected I can't start the phone.
What can I do ?
First thing, I can't start my phone if it's not connected with the USB cable.
Second thing, when I connect my phone with the USB cable, it starts automaticaly even if I didn't push the power button and it's looping and blinking and rebooting endlessly.
Also the phone don't seems to know how charging himself when USB cable connected.
Is it a Bricked samsung phone ?
If it is, how unbrick it ?
Bro, its just discharged when you flashed it
Help Please
User said:
Bro, its just discharged when you flashed it
Click to expand...
Click to collapse
I am getting same issue but each time its on charge it reboots and I can see the screen getting laggier ! And its 3 hour in charge and It still persisits. So should I charge it overnight while its still in boot loop?
---------- Post added at 06:40 PM ---------- Previous post was at 06:35 PM ----------
iddik said:
Hello,
I have a problem with my phone : Samsung J6+ (SM-J610FN/DS)
I have crached a flashing Rom with Odin and I'm sure it is because of that my phone can't start by pressing the power button.
Now my phone has the message : An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software ...
The thing is that it is rebooting and looping without end every 2 seconds on that green screen with that message ...
Only thing I can do is, with the USB cable connected, when the green screen is up, I can push VOL down + VOL up and I can go in download mode.... Then I can push on VOL up but right after the phone reboot in loop again and again ...
Another thing is that without USB cable connected I can't start the phone.
What can I do ?
First thing, I can't start my phone if it's not connected with the USB cable.
Second thing, when I connect my phone with the USB cable, it starts automaticaly even if I didn't push the power button and it's looping and blinking and rebooting endlessly.
Also the phone don't seems to know how charging himself when USB cable connected.
Is it a Bricked samsung phone ?
If it is, how unbrick it ?
Click to expand...
Click to collapse
Did you fix the issue? please Help me if you did. I am getting same issue right now on my moms fone same brand j610f please do help.
Hello, I got the same problem. This happen because the battery is empty and the only way to charge again is open the phone and extract the battery to charged it with a external power supply
I recently tried to install a custom ROM in my samsung j6+ but halfway through it my PC turned off.
Then the problem starts i decided to reboot my phone but it shows this error "No command" " #Reboot recovery cause is [[check_bootmode]RebootRecoveryWithKey]#
Block-based OTA
Supported API: 3
# MANUAL MODE v1.0.0#
E:Failed to mount / cache: Invalid argument
The error message keeps appearing for just a fraction of a second then disappear and appear again
I tried to go to recovery mode but no luck i cant get to it
I drained the battery to turn off the device then go download mode but after get to it, it also keep restarting
help me please. thank you
iddik said:
Hello,
I have a problem with my phone : Samsung J6+ (SM-J610FN/DS)
I have crached a flashing Rom with Odin and I'm sure it is because of that my phone can't start by pressing the power button.
Now my phone has the message : An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software ...
The thing is that it is rebooting and looping without end every 2 seconds on that green screen with that message ...
Only thing I can do is, with the USB cable connected, when the green screen is up, I can push VOL down + VOL up and I can go in download mode.... Then I can push on VOL up but right after the phone reboot in loop again and again ...
Another thing is that without USB cable connected I can't start the phone.
What can I do ?
First thing, I can't start my phone if it's not connected with the USB cable.
Second thing, when I connect my phone with the USB cable, it starts automaticaly even if I didn't push the power button and it's looping and blinking and rebooting endlessly.
Also the phone don't seems to know how charging himself when USB cable connected.
Is it a Bricked samsung phone ?
If it is, how unbrick it ?
Click to expand...
Click to collapse
Have you got the issue fixed on you phone?
Since you can reach download mode - why not doing a clean flash with the correct firmware?
Phone is not rooted, running stock. plugging into windows 10 PC, is not recognised.
Only boots into recovery mode. Power button is damaged and inoperable.
How do I get out of this? Please help.
download samsung drivers and then flash this :
https://forum.xda-developers.com/showthread.php?t=1766399
hop that helps
mattjunior83 said:
Phone is not rooted, running stock. plugging into windows 10 PC, is not recognised.
Only boots into recovery mode. Power button is damaged and inoperable.
How do I get out of this? Please help.
Click to expand...
Click to collapse
Using drivers is useless since you cant make connection to pc on recovery mode because navigating and then selecting doesnt work.. try pressing your powerbutton hard enough until your phone reboots.. if it doesnt work you need to send to repair service to replace powerbutton. Also jig doesnt work on galaxy s7>= without pressing powerbutton
Hello,
I have a similar problem as iddik who is a senior member of this forum who have posted his query on the 30th of October, 2019..
See below is his post...
I have a problem with my phone : Samsung J6+ (SM-J610FN/DS)
I have crached a flashing Rom with Odin and I'm sure it is because of that my phone can't start by pressing the power button.
Now my phone has the message : An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software ...
The thing is that it is rebooting and looping without end every 2 seconds on that green screen with that message ...
Only thing I can do is, with the USB cable connected, when the green screen is up, I can push VOL down + VOL up and I can go in download mode.... Then I can push on VOL up but right after the phone reboot in loop again and again ...
Another thing is that without USB cable connected I can't start the phone.
What can I do ?
First thing, I can't start my phone if it's not connected with the USB cable.
Second thing, when I connect my phone with the USB cable, it starts automatically even if I didn't push the power button and it's looping and blinking and rebooting endlessly.
Also the phone don't seems to know how charging himself when USB cable connected.
Is it a Bricked Samsung phone ?
If it is, how unbrick it ?
When you are in download mode, click on power button and volume down button, After the black screen appears or Samsung logo appears, leave the power button. You will get into Phone main settings. then after that factory reset the phone. Everything will start working again. (This happened to me as well.)