hey all, im stuck running the jedi elite rom (apps constantly FC, laggy, bulky) and so I downloaded AOSB rom. I booted into recovery, which was TWRP 2.6.3.8 i believe, maybe .9. I made a full backup, then I tried to install TWRP 2.7. I flashed the .zip file from the official site, then after flashing, i went to main menu, reboot, then i hit recovery. when it went to reboot into recovery, it got stuck on the black startup screen, it says
RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
Click to expand...
Click to collapse
this didnt bother me, as thats what it normally says when it boots up, but this time it was stuck. I downloaded Odin 3.09, then downloaded the TWRP 2.7 .tar and installed that, it booted into my old rom, and i tried to boot into recovery from there, same result. I used odin to boot back into the rom, downloaded goomanager, and downloaded the older 2.6.3.9 recovery and everything installed fine as far as i can tell, rebooted into recovery, nothing. I used odin to flash a CWM recovery, same results. It seems recovery is broken. Can anyone help me? I just want stock, AOSP android, tired of TouchWiz's bullcrap.
bump
Sent from my SM-N900T using XDA Premium 4 mobile app
Version 2.7 of TWRP requires that you have the new 4.4.2 bootloader. Have you installed the new 4.4.2 bootloader?
If not, then downgrade your TWRP version to the previous one.
ah, no I haven't. How do upgrade the bootloader? And am I fine to flash the 4.4.2 AOSB ROM on TWRP 2.6.3.9?
Sent from my SM-N900T using XDA Premium 4 mobile app
Related
Hey. Ive been trying to flash roms on my s3 since I rooted it weeks ago but nothing seems to work. I downloaded rom manager wich seemed like the best way to do it cause it handels everything. But when it goes into recovery it goes to android recovery 3e and just sits there. I flashed clockwork recocery but still nothing . I tried looking for the file through recovery 3e to install it that way but cant find the rom file anywhere.
Sent from my SGH-I747M on the bell network using xda app-developers app
grea146 said:
Hey. Ive been trying to flash roms on my s3 since I rooted it weeks ago but nothing seems to work. I downloaded rom manager wich seemed like the best way to do it cause it handels everything. But when it goes into recovery it goes to android recovery 3e and just sits there. I flashed clockwork recocery but still nothing . I tried looking for the file through recovery 3e to install it that way but cant find the rom file anywhere.
Sent from my SGH-I747M on the bell network using xda app-developers app
Click to expand...
Click to collapse
3e recovery is stock recovery IIRC. It seems like your flash of the CWM didn't take. Not a fan of ROM manager or any APP to flash RO's. Honestly I suggest you get Odin 3.07 search here
http://www.clockworkmod.com/rommanager
download the recovery for d2att and flash it in odin or..... download goomanager and open the app and flash open recovery script. Voila you can easily flash (make a backup first)
Before flashing always make sure you follow the ROM instructions as well for flash that ROM. Most are generally them same but some do require some interesting steps to get other features and what not.
Just a point that should be reiterated. Do NOT use rom manager to flash things. Once you've got cwm installed just boot into recovery and do it from there. Generally (unless you are updating from a cm10.1 nightly to a newer nightly) you should wipe data/factory reset, wipe cache, wipe dalvik cache in advanced options, flash ROM, flash gapps, reboot the phone and that'll be that.
Sent from my SAMSUNG-SGH-I747 using xda premium
Hi,
I've rooted and unlocked my t989D. To do that I pushed recovery-clockwork-5.0.2.7-hercules.tar via odin and then flashed SGH-T989_UVLH1_Stock_Deodex_Rooted_signed and Tmo_SGH-T989_UVLE1_radio to be at at 4.0.4 ROM and radio.
Now I want to upgrade to cm 10.2. I tried flashing it, and it required a newer radio, so i flashed Tmo_SGH-T989-UVMC6_radio. Then I reflashed cm 10.2 and the installation completed, but I only get a boot loop with the CM sign. I figured it was because I was using an old recovery. So I tried to flash a newer CWM (recovery-clockwork-touch-6.0.3.1-hercules), and that failed, so instead I pushed the latest TWRP (openrecovery-twrp-2.6.3.0-hercules.tar) via Odin. I'm in the same position as with the older version of CWM: I can boot recovery, I can successfully flash 10.2, but I get stuck in a boot loop with the CM sign. Can someone correct me? Id appreciate it if you could correct my logic as well plz.
Update:
I pushed the old CWM back (5.0.2.7), then flashed an older version of CM (9.1) and it got stuck in boot loops as well. I then flashed the stock 4.0.4 ROM back and it gets stuck in boot loops (during samsung logo). I then pushed TWRP 2.6.3 back and reflashed the stock 4.0.4 rom ROM and it boots
Basically, the only combination that well allow a full normal boot is TWRP 2.6.3 + stock 4.0.4 rom (SGH-T989_UVLH1_Stock_Deodex_Rooted_signed)
Update 2:
Solution seems to be a dark side super wipe http://forum.xda-developers.com/showthread.php?t=1477955
So far, this allows me to get 9.2 working. Haven't figured out how to get 10.2 going yet.
Install latest twrp recovery then use superwipe zip file (that is mention in your archive post) than install your rom.
As far as about your boot loop issue wipe your internal and external card than just put rom installation files in it.
Sent from my SGH-T989 using XDA Premium 4 mobile app
Hi! I have encountered a problem, and really hope someone can help me!
Two days ago i flashed Omnirom Nightly on my n7105 to get Android 4.4. I was running cmw recovery but couldnt get the ota updates to work, so i was trying to flash open recovery instead. I used an apk that was supposed to install a script.
When i rebootet my phone, all i could get was the Note 2 boot image. It wont boot into recovery mode, or the rom. I am however able to boot into download mode.
Custom Binary download: Yes (4 counts).
Current binary: Custom
System Status: Custom.
How should i proceed? I've already tried to reflash cwm recovery, which did work, but didnt solve the problem. I am currently downloading stock firmware, but the file is 1.2 GB so it will take i while. Figured i should ask here in the meanwhile.
I'm not an expert at Android at all, im just a guy enjoying having custom roms and playing around a little. I do know that there are a lot of very talented people in this forum, and i really hope someone can help me find a solution. I've been googling for hours, but cant find anything that seems to work for me / or i dont fully understand and wont risk try before someone approves it.
Thank you, Vetle
EDIT: Is it correct that i cant flash any custom rom trough Odin? Or could i just flash omnirom again trough Odin?
If i manage to flash the stock rom and the bootloop goes away, will everything go back to normal, so i can flash cmw again and then a custom rom again?
No custom rom can be flashed through odin, as most of them are zip cwm/twrp base.
When u can only go to download mode, an official firmware only can help u through odin.
Sent from SM-N9005 with xda-app
Thanks for the answer!
Yup, i have flashed a stock rom now and i got the stock recovery. Everything was working fine.
Then i proceeded to do a factory reset in the stock recovery and flashed cwm trough Odin. When it was done, it wouldnt let me into recovery again! I can still boot up the phone tough.
I've also tried Open recovery. CWM via Rom manager. Open Recovery trough Goo Manager... Still cant get recovery to work, the stock rom works tough.
Any ideas?
Okay, i tried to flash the stock rom again and installed Rom Manger.
It still showes TWRP and CWM under installed recovery and i guess these its these two who makes the problem.
My plan now is to figure out how to completely remove them. I've never done anything related to adb before, so i hope it possible to remove them in another way?
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
vetle666 said:
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
Click to expand...
Click to collapse
I had recovery problems in the last few days also.
Installed DN3 rom using philz recovery, because its capable of prepare the phone to a new rom in a easy way.
It all went fine until first reboot.
I had a recovery boot loop. All I could see were some buttons and then reboot again.
Like you I had download access and flashed philz with Odin, but no luck.
Installed twrp via Odin and all was fine, and flashed philz new version.
Then I had to flash a new kernel (to be able to access wifi) and it all started again. Now I'm back on twrp.
Let's see what happens on my next flash.
My suggestion is to flash the recovery, and if that's OK flash the rom and use it
Next time you need recovery get Odin to help, but not all the way from an original rom. Just the custom recovery.
But if you want to get rid of your strange recovery configuration, and you are not already on new 4.3 recovery(which in your case could explain some of the problems you had) , with knox, install an older original rom, 4.1, and make all the steps, root it, install a custom recovery, and from there the room you want.
Reading your path sorting this problem, that was what would do next
Best regards
So two days ago I thought about installing Vision X rom on my Note 3 (T Mobile).
I downloaded the ROM and then backed up my current ROM (nandroid). I had Phillz touch recovery then.
Then I thought about going to TWRP and thus I downloaded the latest zip for my phone and flashed it via Phillz upon trying to reboot into recovery it got stuck in the screen "Rebooting Recovery...".
When I restarted it would still try to reboot into recovery and get stuck. I got out of that by going into download mode and then selecting "Restart Phone".
After that I looked for solutions and upon failing to find any I thought about going back to stock and starting from ground zero. I managed to flash the latest stock using Odin however I forgot to do a factory reset before hand.
When I tried to do a factory reset in my, now stock, phone it failed and then got stuck trying to get into recovery. It would flash "Rebooting Recovery..." then restart and flash that in a loop.
I have lost my root as well in the process and trying to root using Odin and CF-Root just get's me back in the recovery boot loop. I can use the phone OK however this is not a stable situation.
I'm sure I've made some serious errors in the tinkering and would like to get my recovery back. I really love Custom Roms. Any kind and knowledgeable souls out there to help me in my cause?
kaif15 said:
So two days ago I thought about installing Vision X rom on my Note 3 (T Mobile).
I downloaded the ROM and then backed up my current ROM (nandroid). I had Phillz touch recovery then.
Then I thought about going to TWRP and thus I downloaded the latest zip for my phone and flashed it via Phillz upon trying to reboot into recovery it got stuck in the screen "Rebooting Recovery...".
When I restarted it would still try to reboot into recovery and get stuck. I got out of that by going into download mode and then selecting "Restart Phone".
After that I looked for solutions and upon failing to find any I thought about going back to stock and starting from ground zero. I managed to flash the latest stock using Odin however I forgot to do a factory reset before hand.
When I tried to do a factory reset in my, now stock, phone it failed and then got stuck trying to get into recovery. It would flash "Rebooting Recovery..." then restart and flash that in a loop.
I have lost my root as well in the process and trying to root using Odin and CF-Root just get's me back in the recovery boot loop. I can use the phone OK however this is not a stable situation.
I'm sure I've made some serious errors in the tinkering and would like to get my recovery back. I really love Custom Roms. Any kind and knowledgeable souls out there to help me in my cause?
Click to expand...
Click to collapse
Go to the Playstore and download TWRP Coordinator and then
use it to install the latest TWRP recovery for your phone.
Once you can get back into TWRP recovery you need to flash
the cf-autoroot for your phone. Be sure you flash the CORRECT
version of cf-autoroot for your phone's model.
Good luck!
Misterjunky said:
Go to the Playstore and download TWRP Coordinator and then
use it to install the latest TWRP recovery for your phone.
Once you can get back into TWRP recovery you need to flash
the cf-autoroot for your phone. Be sure you flash the CORRECT
version of cf-autoroot for your phone's model.
Good luck!
Click to expand...
Click to collapse
The app is constantly crashing!
It would start for a second then close. I tried the TWRP manager as well with the same result.
I've lost root access when I Odined back to stock, won't I need root access to install new recoveries?
Sounds like you flashed the stock 4.4 firmware and now need recovery to root. Flash this TWRP file using Odin http://goo.im/devs/OpenRecovery/hltetmo/openrecovery-twrp-2.7.0.1-hltetmo-4.4.img.tar
Once you flash it, you need to boot into recovery to install supersu to root.
Switch off the Galaxy Note 3 (remove the battery and reinsert if needed)
Next, press and hold simultaneously Volume Up, Home and Power.Release the buttons when the screen flickers and wait for the TWRP menu.
Select Reboot, then System and install Supersu for root.
Once booted, open Supersu to update it and grant permission.
Hope this helps. Good luck.
Hi,
I have fresh install of latest 4.2.2 android. I am trying to install Philz recovery / TWRP and have tried their latest version and also older version tar files but when after successful flash through ODIN my recovery is back to Android Stock Recovery. I have been trying to get TWRP or Philz recovery but its not happening. My phone is not rooted please guide me how to do it.
Thank you.
Aishwarya Jain
badmaash said:
Hi,
I have fresh install of latest 4.2.2 android. I am trying to install Philz recovery / TWRP and have tried their latest version and also older version tar files but when after successful flash through ODIN my recovery is back to Android Stock Recovery. I have been trying to get TWRP or Philz recovery but its not happening. My phone is not rooted please guide me how to do it.
Thank you.
Aishwarya Jain
Click to expand...
Click to collapse
First install a temperory CWM recovery by Odin and via that install which ever permanent recovery that u want this method helped me and i m sure will help u too.
Hit thanks if it helped
1-Use Root Genius Application to One-click root your Grand i9082 (www.rootgenius.com) it's a windows app, (you need to install Grand i9082's drivers on your PC before rooting)
2-Download the Recovery's image (.img file) and transfer on device's SD card or internal memory
3-Download "Rashr" from Google Play
4-open Rashr
5-Make backup of stock recovery (incase something goes wrong)
6-Click Install recovery from storage
7-Select the Recovery's image (.img file) in Rashr and install your recovery
8-Reboot and enjoy!
Recovery Mode not working
I succesfully rooted my i9082 using Kingo root. Then, I tried flashing CWM using Odin3 in download mode. Even after successfully flashing, the phone doesn't boot to recovery, it stays stuck at the Samsung boot logo. Even the stock recovery seems to have disappeared. The phone boots normally and into download mode, but I can't seem to access recovery or even bootloader. I have tried several different custom recoveries, and my custom BIN down is at 7 counts. Some applications I got off the Play Store say that I have no available recoveries installed/recognized. What do I do?
I also have same problem......!!!
akashboghani said:
I succesfully rooted my i9082 using Kingo root. Then, I tried flashing CWM using Odin3 in download mode. Even after successfully flashing, the phone doesn't boot to recovery, it stays stuck at the Samsung boot logo. Even the stock recovery seems to have disappeared. The phone boots normally and into download mode, but I can't seem to access recovery or even bootloader. I have tried several different custom recoveries, and my custom BIN down is at 7 counts. Some applications I got off the Play Store say that I have no available recoveries installed/recognized. What do I do?
Click to expand...
Click to collapse
I also have same problem..... Now what should I do...??? anyone plz help me.....!!!
akashboghani said:
I succesfully rooted my i9082 using Kingo root. Then, I tried flashing CWM using Odin3 in download mode. Even after successfully flashing, the phone doesn't boot to recovery, it stays stuck at the Samsung boot logo. Even the stock recovery seems to have disappeared. The phone boots normally and into download mode, but I can't seem to access recovery or even bootloader. I have tried several different custom recoveries, and my custom BIN down is at 7 counts. Some applications I got off the Play Store say that I have no available recoveries installed/recognized. What do I do?
Click to expand...
Click to collapse
Flash recovery again, try using Rashr app. If not work, might want to try flashing thru Odin.
Sent from my GT-I9082 using XDA Free mobile app