DISCLAIMER: I ACCEPT NO RESPONSIBILITY WHATSOEVER IF YOU BRICK YOUR PHONE USING THIS METHOD. THE INFORMATION SHARED FOR HELPING THOSE HELP THEMSELVES. MADE ONLY FOR THE XDA PRINCIPLE OF "SHARING KNOWLEDGE"
Everyone is requested not to post unnecessary questions. I am making the OP very clear so you need no further assitance. Critics will be ignored and use of foul language and ungrateful words will be reported.
I am making this thread so as to save all the troublesome steps in making a flashable ROM and risk of bricking due to mistakes.The ROM is made following the instructions from @somboons thread I have made this ROM by myself using G2 kdz extractor which is also available in a thread in xda. The Kernel and the Baseband is made by @savoca and our dear @Cloudyfa for that we must thank them and give credit to them for that fine work.
Thanks to @Jeevandon92 for uploading the flashable 20b zip file
UPDATE -20B KK ROM FOR 802-32GB AND 16GB VERSIONS.
This is the latest Kitkat updated 20B ROM flashable on G2 802.
Rom(20B):
https://mega.co.nz/#!ts40zQyD!RdUSXCK3IMfKdpDriWh9kVX3aENsrxiMu5UQge7FacM
Baseband:
https://mega.co.nz/#!oURgCIha!-YJrFCqrLcGNILJjMUpWdcN1HnMrA2l9KvSEDtcIohM
Kernel:
https://mega.co.nz/#!9RBHGbIT!lHCCYGNB6EhLC0EOrweD4L395_f50gyIUJ4Up9VhI3s
IMP: YOU MUST FLASH THE FOLLOWING KERNEL FOR THIS ROM TO GET THE KNOCK CODE FULLY WORKING [thanks @Cloudyfa again for this]
Supersu:
https://mega.co.nz/#!MdQWBKIa!_xbY0diZfHEX3o4V3p_r-bDQbHrCoBAlF6jTNVONCEI
IMPORTANT: Install Busybox from Playstore so that you have a completly working root.
USE TWRP 2.7.0.0 FOR BEST RESULTS....OTHER FLASHING INSTRUCTIONS REMAIN THE SAME AS MENTIONED HEREIN BELOW
THIS ROM HAS FOLLOWING ADVANTAGES:
---KNOCK CODE FULLY WORKING(NEEDS KERNEL AS PROVIDED IN LINK ABOVE)
---TERRIFIC BATTERY BACKUP( I GET 2 FULL DAYS WITH 15% REMAINING)
--- NO MORE BLUETOOTH DRAINING BATTERY (FIXED FOR GOOD)
----AMAZING RAM MANAGEMENT(NOTICABLY 40-50% BETTER RAM MANAGEMENT- I HAVE ALMOST 1GB RAM FREE AT ALL TIMES AFTER DEBLOATING) [/I][/B][/COLOR][/FONT]
PREVIOUS RELEASE
Rom(20A):
https://mega.co.nz/#!TVJV0ajT!fnc1Kfjc7lgBn3jZZ2ukUHFE62EuW9-kgrCECwc1RJk
Baseband:
https://mega.co.nz/#!SBgnRaBT!TnRG7vvk9D7rLZfMatHDZX0zcyivtCo1vAbUoZFFHtQ
Kernel:
https://mega.co.nz/#!2YxVHRJJ!mKFBFJOEZofn-cAjX90RIa5IQOfsi9EUKT05GQmyIK8
Supersu:
https://mega.co.nz/#!SJx0VKbK!Nt3c1XxSzPCmZjijpTnGXPdJExzEfDZ6tSLCf3VQsVc
Requirements:
-A rooted G2 on JB 4.2.2 stock rom.
-Recovery installed : atleast TWRP 2.6.3.3 installed.http://forum.xda-developers.com/showthread.php?t=2472223
-PATIENCE
Please follow the instructions as below for a perfectly rooted Stock Kitkat with Recovery. If you do not follow the instructions, things will go wrong and you may have bricked your G2. Then you would have to flash kdz to restore back your phone.
FOLLOW THE STEPS AND YOU ARE FINE WITH A PERFECT ROOTED KK ROM WITH RECOVERY:-
> DOWNLOAD THE FILES FROM MY FOLDER ON MEGA.
> BACKUP ALL DATA AND INFORMATION, PREFERABLY A NANDROID BACKUP, JUST IN CASE.
1. Copy all the files downloaded from my Mega account to your SD card.
2. Reboot into TWRP recovery.
3. Perform an Advance wipe to wipe: Dalvik,Cache,Data & System. Do not wipe Internal Storage under any circumstances.
4. Flash in following Order one after another, dont boot or wipe in between:
ROM---- BaseBand---- Kernel----SuperSU
5. Wipe Cache/Dalvik (This option is displayed on TWRP after successful flashing)
6. Reboot and,
7. Enjoy KK stock rooted with recovery.
IMPORTANT: Install Busybox from Playstore so that you have a completly working root.
I have tried to give credit to all I am aware of. If you feel you deserve credit for any of your contributions PM me and I will acknowledge. Thank you.
I hope this thread helps everyone looking for rooted kitkat....It takes a negligible effort to press Thanks if this thread helped you or educated you.:good:
Use twrp 2.7.0.0. FOR BEST RESULTS
Sent from my LG-D802 using XDA Premium 4 mobile app
rastigo said:
Use twrp 2.6.3.3 only. Other recovery may not work
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hate to ask but Can we have one for the d803 and i will test it. Its been released a few days ago
If we flash this, does it allow for OTA updates from LG (if/when there are some) or does this 'disqualify' the ROM? Just interested in seeing stock again some day, I get lots of different wants, side effect from the mass dosage of pain meds for severe chronic pain hah.
Thanks for any questions answered.
Sent from my Nexus 7 using Tapatalk
You will get OTA BUT since you would be rooted with custom recovery it will bootloop. I suggest flash and wait. Xda will surely have someone posting any updates. I will make flash able zip rhen which you can use later
Sent from my LG-D802 using XDA Premium 4 mobile app
malek777 said:
Hate to ask but Can we have one for the d803 and i will test it. Its been released a few days ago
Click to expand...
Click to collapse
If i get the kdz file i will make one for you. I don't have the 803
Sent from my LG-D802 using XDA Premium 4 mobile app
rastigo said:
If i get the kdz file i will make one for you. I don't have the 803
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW057495432109876543213/D803R20D_00.kdz
---------- Post added at 06:13 AM ---------- Previous post was at 05:41 AM ----------
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW697495432109876543213/D803B20E_00.kdz
Or this one for bell I got it from bigboys thread
OP updated
OP updated with links to the files individually, as requested by few members here
Would I be able to flash this through that method from CM11?
arkain123 said:
Would I be able to flash this through that method from CM11?
Click to expand...
Click to collapse
I'm pretty sure.
Sent from my VS980 4G using Tapatalk
Enter The Nexus said:
I'm pretty sure.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
I'm wondering 'cause it does say a 4.2.2 rom is needed and CM11 is 4.4, right? Can I just sideload these files from CWM?
Yes you can, but root and twrp 2.6.3.3 is must needed
Sent from my LG-D802 using XDA Premium 4 mobile app
What Rom version is this ? I mean open Europe or something else... Thanks for your work..
Its a universal Rom, for all g2 802.supports all areas. Try it, enjoy
Sent from my LG-D802 using XDA Premium 4 mobile app
@rastigo thanks for this ROM!
Just wanted to report that the process works flawlessly with CWM custom recovery, too; I had it installed because was using Cloudyfa's ROM before.
I like this because is more stock-perfect than others.
Cheers!
Since this ROM have recovery, if we want go back to JB, can it be by flashing nandroid backup via recovery or should flash kdz file?
No you would be required to flash Know unless you have jb baseband
Sent from my LG-D802 using XDA Premium 4 mobile app
rastigo said:
Yes you can, but root and twrp 2.6.3.3 is must needed
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can't access twrp from my device (it's a d805 with a d802 rom), is there no way to flash it through CWM? Would downgrading the installed twrp work?
arkain123 said:
I can't access twrp from my device (it's a d805 with a d802 rom), is there no way to flash it through CWM? Would downgrading the installed twrp work?
Click to expand...
Click to collapse
As I wrote a couple of posts above, I went through the installation process starting from CWM, precisely this version modded by Cloudyfa.
I have TWRP 2.6.3.4 installed. Can I do it? if not how can I downgrade it to 2.6.3.3? thanks and does it matter if the phone 16gb or 32gb
Related
Hey everyone,
This is a modified stock kernel based on AT&T UCALH9 and is ONLY compatible with stock-based ICS roms. I haven't seen this around so I decided to make it myself for all to use and assist in development. The root application of choice is Chainfire's SuperSU. Remember that the first boot takes longer than usual after you clear the cache.
Features:
•Insecure rooted kernel
•init.d script support
•ADB support
•Custom bootanimation.zip support
Instructions:
1.Download the recovery-flashable zip to your phone's SD card
2.Flash in recovery
3.Wipe cache and dalvik cache
4.Reboot and enjoy
Standard disclaimer: I am not responsible for anything bad that happens to your phone. I have personally tested this on my own AT&T SGS3 and it works great for me.
Special thanks to NunHugger for his infinite wisdom in helping me figure out how to get custom boot animations working and letting me borrow his updater script. Also thanks to dsixda for the amazing Android Kitchen.
Download:
From here
Mirror
Or, alternatively, directly from this thread
Kernel Source: http://opensource.samsung.com
Secondary ODIN Instructions
This is the modified kernel made flashable in ODIN ONLY. Do not flash this in recovery as it will not work. Flashing with ODIN will increase your flash counter so if you use it, make sure to use Triangle Away to set your counter back to zero. Flashing using Mobile ODIN will NOT increase your flash counter, however.
Download:
ODIN-Flashable Kernel
Mirror
Checksum: 9d9e2ae5caf69a86d1d1c3779c05905f
First, thanks
mbc663 said:
First, thanks
Click to expand...
Click to collapse
You're very welcome
Awesome, thank you for putting this together! Seems like everyone here is using leaked jb builds, ports, etc. and no one is building on the latest ota ics update. At the moment I'm more interested in stability than trying out new stuff so I'm on rooted, debloated stock UCALH9.
I'll give this a whirl today, thanks again for working on it. :beer:
skrambled said:
Awesome, thank you for putting this together! Seems like everyone here is using leaked jb builds, ports, etc. and no one is building on the latest ota ics update. At the moment I'm more interested in stability than trying out new stuff so I'm on rooted, debloated stock UCALH9.
I'll give this a whirl today, thanks again for working on it. :beer:
Click to expand...
Click to collapse
You're welcome! I haven't seen much LH9 work either so I figured it's a step in the right direction. After talking to Nun, he inspired me to eventually release my own rom, so you guys keep an eye out. I'm busy with the university, but more recently learning development. I want to push out something nice for you guys if I can get the time, no ETA.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Thanks again, it's working great. Thanks to this kernel I was able to get some of the V6 Supercharger settings to stick that wouldn't stick on re-boot before (except for those setting requiring a deodexed rom), as well as some performance enhancements and custom boot animation using Rom Toolbox that I couldn't get to work before.
Looking forward to trying out your rom. Cheers! :beer:
skrambled said:
Thanks again, it's working great. Thanks to this kernel I was able to get some of the V6 Supercharger settings to stick that wouldn't stick on re-boot before (except for those setting requiring a deodexed rom), as well as some performance enhancements and custom boot animation using Rom Toolbox that I couldn't get to work before.
Looking forward to trying out your rom. Cheers! :beer:
Click to expand...
Click to collapse
That's always great to hear. I'm glad it worked out for you.
Great work! Thanks for contribution to the community.
Sent from my SGH-I747 using Tapatalk 2
NunHugger said:
Great work! Thanks for contribution to the community.
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
It wouldn't have been possible without your help! Thanks again!
This what I was looking for. Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
norbarb said:
This what I was looking for. Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
You're definitely welcome
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Hey guys, I'm just wondering if there is any demand for a UCALH9 based ROM with Aroma installer so you can pick and choose what you want included, and that also includes this kernel. I may have something along those lines in the works.
stratatak7 said:
Hey guys, I'm just wondering if there is any demand for a UCALH9 based ROM with Aroma installer so you can pick and choose what you want included, and that also includes this kernel. I may have something along those lines in the works.
Click to expand...
Click to collapse
Thanks for the kernel. I’m getting longer “deep sleep” now and Light Flow seems to be working better too.
A deodex, rooted LH9 rom would be nice. Not a user of Aroma installer.
Silverexp said:
Thanks for the kernel. I’m getting longer “deep sleep” now and Light Flow seems to be working better too.
A deodex, rooted LH9 rom would be nice. Not a user of Aroma installer.
Click to expand...
Click to collapse
I'm glad to hear that. Aroma is nice, but it takes a long time to get it set up to my liking (I don't like issues). I'm happy to announce that I am currently uploading a ROM based on UCALH9 with this kernel included. I've spent a lot of time on this to make it right. Expect new updates soon As I talk to themers. http://forum.xda-developers.com/showthread.php?p=33584484#post33584484
Is there a rooted, stock kernel floating around anywhere, w/o a custom boot image?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
ConeyKiller said:
Is there a rooted, stock kernel floating around anywhere, w/o a custom boot image?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
drothenburger's thread in General has an unmodified UCALH9 kernel. I don't know if it's rooted. I have a stock boot animation in themes and apps that you can use with this kernel though to remedy the stock feel.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
For whatever reason I was more reckless with my captivate and did not care, but I never even soft bricked it...however..just to be sure..I download the recovery flashable kernel, put it on my ext-sd card, boot into stock 3e recovery, and I can flash this?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
ConeyKiller said:
For whatever reason I was more reckless with my captivate and did not care, but I never even soft bricked it...however..just to be sure..I download the recovery flashable kernel, put it on my ext-sd card, boot into stock 3e recovery, and I can flash this?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
You will need to flash this from a custom recovery rather than 3e. Cwm or twrp will work. You can flash the tar file from Odin though. It will increase your flash counter though. Easily remedied once you're rooted with triangle away. Note that this will not automatically root you. Use qcom toolkit for that
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links (US variants)
Now: one common recovery for all: jflte
The below specific variants are no more updated, use jflte common variant
AT&T: jflteatt
Sprint: jfltespr
T-Mobile: jfltetmo
Verizon: jfltevzw
Canada/Bell: jfltecan
Cricket: jfltecri
US Cellular: jflteusc
Click to expand...
Click to collapse
Last version can be found here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Phil3759 said:
Last version can be found here:
http://d-h.st/users/philz_touch/?fld_id=18376#files
Click to expand...
Click to collapse
Currently going to empty folder.
-- edit --
Working for me now.
I was just about to PM you asking if you would be getting this to us. Thanks!
Sent from my SGH-M919 using xda app-developers app
I was really hoping this came to our tmo s4!! Thanks a lot Phil!!
Sent from my SGH-M919 using Tapatalk 4 Beta
Never used this recovery before. Is it as good or better than TWRP?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Phone: Tmobile Samsung Galaxy s4 m919
Rom: Wicked v2
Kernel: Stock
Radio: Stock
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thank you very much!
Sent from my SGH-M919 using xda premium
There is no history of breaking phones is there?
One thing I couldnt figure out about cwm is that I couldnt name the backups in recovery...is that possible with this one?
Famously Infamous
mgbotoe said:
There is no history of breaking phones is there?
One thing I couldnt figure out about cwm is that I couldnt name the backups in recovery...is that possible with this one?
Famously Infamous
Click to expand...
Click to collapse
If you backup using CWM through ROM Manager you can name the backups.
MisterEdF said:
If you backup using CWM through ROM Manager you can name the backups.
Click to expand...
Click to collapse
By the way, this recovery auto adds a to folder name the rom name grabbed from build.prop
YouCreateGaming said:
Never used this recovery before. Is it as good or better than TWRP?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Phone: Tmobile Samsung Galaxy s4 m919
Rom: Wicked v2
Kernel: Stock
Radio: Stock
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
Better Than any recovery you've used before
In my honest opinion
Best cwm with all the options.
Sent from my SGH-M919 using Tapatalk 2
works flawlessly.....
when we backup a TW rom, it takes around 45 min while TWRP is doing in 2 min.. can this can be fixed..
`SBR` said:
works flawlessly.....
when we backup a TW rom, it takes around 45 min while TWRP is doing in 2 min.. can this can be fixed..
Click to expand...
Click to collapse
I never bothered to do it as I stopped because it takes soo long
Use odin for the .tar & just flash the zip file through recovery right? Just wana make sure
snkrfrkr127 said:
Use odin for the .tar & just flash the zip file through recovery right? Just wana make sure
Click to expand...
Click to collapse
Or.
Not 'and'. One or the other. You don't need both.
Yea I literally just read the original thread completely over looked it. Thanks tho
Sent from my SGH-M919 using xda app-developers app
Do we need to flash our device version or can we also flash the i9505 version, which is newer?
Meowdib said:
Do we need to flash our device version or can we also flash the i9505 version, which is newer?
Click to expand...
Click to collapse
YOUR DEVICE ONLY
I cannot stress that enough
Sent from my SGH-M919 using xda app-developers app
Will not mount my external 64 gb SanDisk micro SD xc card formatted fat32. Had to switch to Cwm. Cwm and twrp don't have this problem, just tested. I love this recovery software. Please fix. Thanks
Edit: I even tried an updated version for the i9505 and still didn't mount. Also, I'm using an i9505 ROM on my sgh-m919 in case you're wondering about the sig
Sent from my GT-I9505 using xda app-developers app
omnifarious said:
Will not mount my external 64 gb SanDisk micro SD xc card formatted fat32. Had to switch to Cwm. Cwm and twrp don't have this problem, just tested. I love this recovery software. Please fix. Thanks
Edit: I even tried an updated version for the i9505 and still didn't mount. Also, I'm using an i9505 ROM on my sgh-m919 in case you're wondering about the sig
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
The card is probably exFAT format. If you reformat it to Fat32 I bet you it would work.
Sent from your phone. You should be careful where you leave that thing.
FLASH
A small windows batch tool to easily select from different recoveries or boot images and flash them.
Pre-Requisites1. Adb debugging enabled
Click to expand...
Click to collapse
Features
Flash boot and recovery images
Really small portable tool ~1MB
multiple images selectable from list
Click to expand...
Click to collapse
XDA:DevDB Information
FLASH boot and recovery, Tool/Utility for the Moto G 2014
Contributors
mnishamk
Version Information
Status: Stable
Current Stable Version: v1.2
Created 2014-10-24
Last Updated 2014-10-24
Download
head over to downloads section
Changelog
Code:
[COLOR="Red"]v1.2[/COLOR]
minor edits
bug fix
[COLOR="red"]v1.1[/COLOR]
initial release
This tool makes the job easy bro....thanx...I flashed twrp using your tool...
Nice
Does bootloader need to be unlocked first?
joel-n1 said:
Does bootloader need to be unlocked first?
Click to expand...
Click to collapse
bootloader need to be unlock for flashing custom recovery
Very useful tool. Thanks a lot
bluepower said:
Very useful tool. Thanks a lot
Click to expand...
Click to collapse
Where is the download link???
And can it be used to flash stock boot.img and recovery.img files so that we can get ota on our device...
I have a 1068 international 16gb device with custom recovery, custom kernel...
Sent from my XT1068 using XDA Free mobile app
vinaybaboo said:
Where is the download link???
And can it be used to flash stock boot.img and recovery.img files so that we can get ota on our device...
I have a 1068 international 16gb device with custom recovery, custom kernel...
Sent from my XT1068 using XDA Free mobile app
Click to expand...
Click to collapse
It's a Dev Db project so, you may have to see the online version, instead of from the app. I've added a link to redirect there.
I think so, yes. But i don't think it will do any good. AFAIK, ota can't be done if you have an unlocked bootloader.
mnishamk said:
It's a Dev Db project so, you may have to see the online version, instead of from the app. I've added a link to redirect there.
I think so, yes. But i don't think it will do any good. AFAIK, ota can't be done if you have an unlocked bootloader.
Click to expand...
Click to collapse
Thanks man... Appreciate it... :thumbup:
Sent from my XT1068 using XDA Free mobile app
any tool for unlocking bootloader?
Sent from my XT1068 using XDA Premium 4 mobile app
amritmalviya said:
any tool for unlocking bootloader?
Sent from my XT1068 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
None so far, you'll have to go to the site and follow instructions to do that
amritmalviya said:
any tool for unlocking bootloader?
Sent from my XT1068 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/moto-g-2014/general/super-easy-bootloader-unlocker-using-t2945654
Haven't tried it though,its got relock issues. Use at your risk
Can someone please provide the stock recovery img?
request
@mnishamk
i would like to request a similar tool for kernel which could easily backup and restore kernels on our phone.
only if your time permits and if you believe it would be useful.
thank you
Harsh.gundecha said:
@mnishamk
i would like to request a similar tool for kernel which could easily backup and restore kernels on our phone.
only if your time permits and if you believe it would be useful.
thank you
Click to expand...
Click to collapse
i don't do much on windows nowadays,. sorry
Ixnsjjd
Hey all,
I have since June a Huawei Ascend P6 with a Chinese version of Android 4.4, the phone is bought in The Netherlands but upgraded in advance to 4.4 Beta. I want to update this version to a Europe version of the software. The software version is: P6-U06V100R001C17B507, EmotionUI 2.0.
Is this possible and how can I do this?
Thnx in advance!!
If you go in general section of the forum for p6 you can find a guide for reverting back to 4.2 (jb) or 4.4 (kk) international vetsions by flashing a small unicom firmware.
Sent from my P6-U06 using xda app-developers app
Link
tileeq said:
If you go in general section of the forum for p6 you can find a guide for reverting back to 4.2 (jb) or 4.4 (kk) international vetsions by flashing a small unicom firmware.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Could you post the link?
I can not find the thread.
http://forum.xda-developers.com/showthread.php?t=2951566
Sent from my P6-U06 using xda app-developers app
Unlock phone
I can't get my Phone to unlock. Can someone give advise or tips?
New problems
Alright I have a new problem :crying:
I have been stupid and careless.
I tried to install the rom but it didn't work, so I tried to unlock my Phone that also didn't work.
So I installed twrp 2.6.3.0 and whiped all files on the Phone.
So now I don't have any OS at all.
How can I install a Rom trough the install function on TWRP and wich rom can I use?
I hope that someone can help me.
kevin1232sn1 said:
Alright I have a new problem :crying:
I have been stupid and careless.
I tried to install the rom but it didn't work, so I tried to unlock my Phone that also didn't work.
So I installed twrp 2.6.3.0 and whiped all files on the Phone.
So now I don't have any OS at all.
How can I install a Rom trough the install function on TWRP and wich rom can I use?
I hope that someone can help me.
Click to expand...
Click to collapse
Ok so first download this http://forum.xda-developers.com/showthread.php?t=2765202
Then get an update firmware from internet (I would suggest B125) and put it on your sdcard. Then with the tool, while the phone is connected to pc, install stock jb recovery through fastboot commands (if you don't know how I can help you there too). After a successful flash of the recovery you can boot into it and install the stock firmware which will bring back your P6 to life. If anything doesn't work write here and we'll see where its stuck.
Sent from my P6-U06 using xda app-developers app
Usb drivers
Could you post a link to the huawei usb drivers? I can't get it installed on my pc at home.
Thnx for helping me out!!
If you have the hisuite it should install them.
Sent from my P6-U06 using xda app-developers app
---------- Post added at 19:46 ---------- Previous post was at 19:45 ----------
http://consumer.huawei.com/minisite/HiSuite_en/
Sent from my P6-U06 using xda app-developers app
Jb recovery
Could you explain how to install stock jb recovery?
I have downloaded b125 and connected my device.
This is the thread that explains how to switch between custom (twrp 2.6 that you have) and stock recoveries (for jb that you want to go back to). You have all the steps and links for downloading necessary files. If you still have problems write here and I'll see what is there to be done.
http://forum.xda-developers.com/showthread.php?t=2534420
Sent from my P6-U06 using xda app-developers app
I'm not rooted, running stock out of the box 5.0.2 tmobile us 64 gb edge.
If i take the OTA to 5.1.1 with the latest build, will i still be able to root and flash twrp with a rom etc?
I am not new to odin but new to the s6 way of things. S5 was so easy to root.
if youre not rooted go ahead and do it..
i just updated and lost root.. im missing my root!!... XPOSED ... NOOOOO!!!!:crying::crying::crying::crying:
cyberone24 said:
if youre not rooted go ahead and do it..
i just updated and lost root.. im missing my root!!... XPOSED ... NOOOOO!!!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
But there is a root method for the update correct ? I just want to make sure. Thanks for the quick reply
Sent from my SM-G925T using XDA Free mobile app
I 2nd the XPOSED. That and adaway are the two biggest reasons I root. That and to remove bloat
Sent from my SM-G925T using XDA Free mobile app
I have taken every OTA so far and they have all worked with out TWRP posted by Aou.
I haven't yet tried it on the latest firmware, OH6, but there is no reason it shouldn't work. Just Odin flash twrp after downloading a custom ROM to your internal memory and then immediately boot to twrp and you should be able to install any S6 ROM provided it is bundled with the unikernel or if you flash a kernel that supports the ROM and the G925T.
And as for Xposed you'll need to flash a deodexed ROM to get it working. There are several choices out there, Xtre Sto Lite is a popular one.
Hmm will try that..
Xtrestolite is a good rom, but you will not have VoLTE and WiFi calling,
There is one rom that is deodexed/debloated with VoLTE and WiFi calling. . RAPTURE is the name g920t
But dev left development. . And it's of8.
kswa1987 said:
I have taken every OTA so far and they have all worked with out TWRP posted by Aou.
I haven't yet tried it on the latest firmware, OH6, but there is no reason it shouldn't work. Just Odin flash twrp after downloading a custom ROM to your internal memory and then immediately boot to twrp and you should be able to install any S6 ROM provided it is bundled with the unikernel or if you flash a kernel that supports the ROM and the G925T.
And as for Xposed you'll need to flash a deodexed ROM to get it working. There are several choices out there, Xtre Sto Lite is a popular one.
Click to expand...
Click to collapse
Is the stock rom deodexed?
Sent from my SM-G925T using XDA Free mobile app
Josh McGrath said:
Is the stock rom deodexed?
Sent from my SM-G925T using XDA Free mobile app
Click to expand...
Click to collapse
Nope