Related
Hi guys:
My question that if we can find a stock JB rom exactly like the Nexus 4 rom but working on Xperia Ion?? And what is AKOP and AOSP roms?
Sony not yet released any JB ROM/ Firmware for iON. It's due in May.
You will get official JB fw from the end of May.
AOSP means Android Open Source Project.
It is the "stock ROM" (or pure vanilla ROM) made by Google and is Open Source.
Lots of custom ROMs base on this rom, e.g. CyanogenMod, Panaroid Android, etc.
AOKP (Android Open Kang Projecy) is a custom ROM base on AOSP.
auni said:
Sony not yet released any JB ROM/ Firmware for iON. It's due in May.
Click to expand...
Click to collapse
cities516 said:
You will get official JB fw from the end of May.
AOSP means Android Open Source Project.
It is the "stock ROM" (or pure vanilla ROM) made by Google and is Open Source.
Lots of custom ROMs base on this rom, e.g. CyanogenMod, Panaroid Android, etc.
AOKP (Android Open Kang Projecy) is a custom ROM base on AOSP.
Click to expand...
Click to collapse
Thank you guys , but i am not talking about the official Sony JB update.
I am asking if that can i find a rom like the Nexus 4 rom? Stock without any custom thing from Sony like AOSP or like Nexus 4 rom ported to Xperia Ion.
auni said:
Sony not yet released any JB ROM/ Firmware for iON. It's due in May.
Click to expand...
Click to collapse
cities516 said:
You will get official JB fw from the end of May.
AOSP means Android Open Source Project.
It is the "stock ROM" (or pure vanilla ROM) made by Google and is Open Source.
Lots of custom ROMs base on this rom, e.g. CyanogenMod, Panaroid Android, etc.
AOKP (Android Open Kang Projecy) is a custom ROM base on AOSP.
Click to expand...
Click to collapse
Thank you guys , but i am not talking about the official Sony JB update.
I am asking if that can i find a rom like the Nexus 4 rom? Stock without any custom thing from Sony like AOSP or like Nexus 4 rom ported to Xperia Ion.
It depends on which ion you have. The international versions that can have the bootloader unlocked there is a CM10.0 (JB) ROM out. If you have at&t one then you're out of luck.
Sent from my LT28at using xda app-developers app
Parastie said:
It depends on which ion you have. The international versions that can have the bootloader unlocked there is a CM10.0 (JB) ROM out. If you have at&t one then you're out of luck.
Sent from my LT28at using xda app-developers app
Click to expand...
Click to collapse
No i have the normal version with unlocked bootloader.
In Cyanogenmod site i can see just the CM9 version , where can i fing the CM10?
The $niper said:
No i have the normal version with unlocked bootloader.
In Cyanogenmod site i can see just the CM9 version , where can i fing the CM10?
Click to expand...
Click to collapse
Here you go: Xperia ion Android Development
I wish you can find the rom you want.
you have to unlock your bootloader in order for you to flash CM, AOKP and AOSP roms..go to the development sections for ION and read the descritions and instructions in the OP :good: goodluck
Thanks , my bootloader is unlocked and i foung unofficial CM10 and i tried it , it's good but i want to know is there different between it and the stock android rom like AOSP? Can i find AOKP?
boyheadkick said:
you have to unlock your bootloader in order for you to flash CM, AOKP and AOSP roms..go to the development sections for ION and read the descritions and instructions in the OP :good: goodluck
Click to expand...
Click to collapse
@ The $niper : Read the above. You were asked to check the Development section. Unless you check the development section properly, asking questions won't be helping much.
auni said:
@ The $niper : Read the above. You were asked to check the Development section. Unless you check the development section properly, asking questions won't be helping much.
Click to expand...
Click to collapse
I had checked it but i didn't know what i have to search for , there is no roms called Nexus 4 rom for Ion or AOKP for Ion.
The $niper said:
I had checked it but i didn't know what i have to search for , there is no roms called Nexus 4 rom for Ion or AOKP for Ion.
Click to expand...
Click to collapse
name says it
[ROM] Xperia NeXuS [V2][Mod Friendly][Locked/Unlocked Bootloader]
http://forum.xda-developers.com/showthread.php?t=2260800
CyanogenMod 10 (4.1 JB)
{Ion}[DEVELOPMENT] - CM10 - FreeXperia Project
http://forum.xda-developers.com/showthread.php?t=1929623
AOKP for Xperia is Kang Xperia Project
[AOKP][JB] Xperia ION - KangXperiaProject - [Milestone 1 - R3]
http://forum.xda-developers.com/showthread.php?t=2003910
boyheadkick said:
name says it
[ROM] Xperia NeXuS [V2][Mod Friendly][Locked/Unlocked Bootloader]
http://forum.xda-developers.com/showthread.php?t=2260800
CyanogenMod 10 (4.1 JB)
{Ion}[DEVELOPMENT] - CM10 - FreeXperia Project
http://forum.xda-developers.com/showthread.php?t=1929623
AOKP for Xperia is Kang Xperia Project
[AOKP][JB] Xperia ION - KangXperiaProject - [Milestone 1 - R3]
http://forum.xda-developers.com/showthread.php?t=2003910
Click to expand...
Click to collapse
Thanks for help.... The first one is ICS rom not JB , the second is good , i had tryied it and i asked what is the different between it and Nexus 4 JB but no answer for now. The third i will try it to see how it's
The $niper said:
Thanks for help.... The first one is ICS rom not JB , the second is good , i had tryied it and i asked what is the different between it and Nexus 4 JB but no answer for now. The third i will try it to see how it's
Click to expand...
Click to collapse
I had typed an explanation for you with the differences between all those roms, but then I figured that everything I said could be easily Google'd, and if you didn't bother doing that, I shouldn't bother explaining what every rom is and waste my time...
Just know: AOSP is stock Android (it's what's on the Nexus 4, Galaxy Nexus, Nexus 7 and Nexus 10, with a bit of a different layout for the tablets). CM, AOKP, Slim Bean and Paranoid Android (you should check PA out as well) are all basically AOSP with some extra options. The only way of really knowing them all is trying them. They're all pretty much the same but focus on a different aspect (AOKP and CM are in my opinion pretty much the same though). Also every rom has some screenshots in the thread to show what's new or different, just take a look at those.
One major advantage that all of the custom roms that I mentioned have over AOSP is that they support the theme engine, so you can easily change the looks by installing a theme app. There's lots of those on the Play Store. They're a handy way of changing the looks of your phone once in a while without having to flash a new rom.
Redstarr1 said:
I had typed an explanation for you with the differences between all those roms, but then I figured that everything I said could be easily Google'd, and if you didn't bother doing that, I shouldn't bother explaining what every rom is and waste my time...
Just know: AOSP is stock Android (it's what's on the Nexus 4, Galaxy Nexus, Nexus 7 and Nexus 10, with a bit of a different layout for the tablets). CM, AOKP, Slim Bean and Paranoid Android (you should check PA out as well) are all basically AOSP with some extra options. The only way of really knowing them all is trying them. They're all pretty much the same but focus on a different aspect (AOKP and CM are in my opinion pretty much the same though). Also every rom has some screenshots in the thread to show what's new or different, just take a look at those.
One major advantage that all of the custom roms that I mentioned have over AOSP is that they support the theme engine, so you can easily change the looks by installing a theme app. There's lots of those on the Play Store. They're a handy way of changing the looks of your phone once in a while without having to flash a new rom.
Click to expand...
Click to collapse
The reason why i don't search on google that i am not very good with english language so i can't ream much to find the answer....
So what you are trying to told me that CM and AOKP both are stock android roms right? I tried them both and i saw them both exactly the same , just so small defferents.
Thank you because now i know what i have to search for: "JB 4.2 from CM or AOKP".
I tried both AOKP and CM10 , but also both have the same Wifi problem , it can't find any network.
The $niper said:
Thanks , my bootloader is unlocked and i foung unofficial CM10 and i tried it , it's good but i want to know is there different between it and the stock android rom like AOSP? Can i find AOKP?
Click to expand...
Click to collapse
The only difference, pretty much, is the launcher is trubutch in cm and in google aosp its googles clean rom
But cyanogen mod gives you more options
And it has the tmobile theme engine
So you can do anything with cyanogenmod and almost anything with aosp
Sent from my LT28i using Tapatalk 2
Zachinater said:
The only difference, pretty much, is the launcher is trubutch in cm and in google aosp its googles clean rom
But cyanogen mod gives you more options
And it has the tmobile theme engine
So you can do anything with cyanogenmod and almost anything with aosp
Sent from my LT28i using Tapatalk 2
Click to expand...
Click to collapse
Aha , now i am using CM10. Thanks for help.
There is an aokp rom available in the ion develpment thread as well as paranoid android and many others based on aosp
Sent from my LT28i using Tapatalk 2
Unofficial-Official JellyBean for P930/935/936
Unofficial-Official JellyBean for P930/935/936 - N2 - with working WiFi. Just clean ROM like original from SU640.
Download: (Need minimum 630mb free size on System part )
http://dfiles.ru/files/w4gujg5ef
For information:
For JellyBean ROM for I-Project need 1Gb system size. So when you flash KDZ it will repart you eMMC.
I unpack KDZ from SU640, and repack System part.
Deleted all Operator Apps and Google Apps, remove SecurityCheck, adapt ROM for GSM, and now size of ROM ~ 630mb. And we can flash it via CWM without problem on old partition table and it working with old MODEM.
I ported new kernel 3.4 from LG F120S and SU640, adaptive it for P930.
My port Sphinx V4.1 - 4.1.2 JB for P930
Probably fix copability with different bootloaders;
Rework battery and charger drivers;
Translated to RUS/UKR
Need 646mb. free space on System part!
Download:
http://dfiles.ru/files/1er0nv65u
First patch for Sphinx ROM
Fix some bugs in sound driver;
Fix proximity sensor;
Some fixes for telephony.
Download: Global_Patch_1.zip
Second patch for Sphinx ROM
Fix random boots during sleep;
Added 2 new LG apps: PhotoAlbum widget + Photo wallpaper;
Restore EasySettings.
Download: Global_Patch_2.zip
Bugs:
Blue screen of death on Widows PC (try different mode connections); - turn-off "USB-debug"
Big thanks All authors who made Sphinx ROM!
Link available!
Awesome, awesome work. Can't wait to have official 4.1.2 on the P930!
miroslav_mm said:
Unofficial-Official JellyBean for P930/935/936
For JellyBean ROM for I-Project need 1Gb system size. So when you flash KDZ it will repart you eMMC.
Click to expand...
Click to collapse
Will this introduce any problems if switching between the already existing ICS, CMx ROMs other than needing the corresponding gapps lite from there on out?
I would be interested in your 3.4 kernel. Do you have the source on github?
I also be interested in his 3.4 kernel
tdmcode said:
I would be interested in your 3.4 kernel. Do you have the source on github?
Click to expand...
Click to collapse
tdmcode said:
I would be interested in your 3.4 kernel. Do you have the source on github?
Click to expand...
Click to collapse
Will available on my Github later.
Who install ROM please install patch_1.zip
If you delete strings from build.prop
ro.build.target_operator=SKT
ro.build.target_country=KR
you will see new settings for GSM and it remove T Roaming Settings.
miroslav_mm said:
Will available on my Github later.
Who install ROM please install patch_1.zip
If you delete strings from build.prop
ro.build.target_operator=SKT
ro.build.target_country=KR
you will see new settings for GSM and it remove T Roaming Settings.
Click to expand...
Click to collapse
Thanks for your work!
I have flashed this rom on my ATT P930，but Phone has been restarted and cant get into system.
so I restore to 20E.
Looking forward to your 3.4 kernel too!
navik said:
Thanks for your work!
Phone has been restarted and cant get into system.
so I restore to 20E.
Click to expand...
Click to collapse
Did you wipe your Phone via recovery? Its working without any problem.
miroslav_mm said:
Did you wipe your Phone via recovery? Its working without any problem.
Click to expand...
Click to collapse
Yeah no problems here. But I did install through CWM and not ROM manager. Out of habit I install new ROMs through CWM due to issues I have had with installing new ROMs through ROM manager.
Sent from my LG-P930 using xda app-developers app
miroslav_mm said:
Did you wipe your Phone via recovery? Its working without any problem.
Click to expand...
Click to collapse
Sure，I used recovery 5.82 and had wiped data ，wipe cache and wipe dalvik cache.
Thanks for reply and your work.
I will try again！
Sent from my LG-SU640 using xda premium
What are the advantages of the 3.4 kernel ? more compatible with JB 4.x.x ?
EDIT: Got the answer here for those interested: http://rootzwiki.com/topic/39958-what-is-the-value-of-the-linux-34-kernel/
Btw, great work.
just1nsama said:
What are the advantages of the 3.4 kernel ? more compatible with JB 4.x.x ?
Click to expand...
Click to collapse
Yes of course. Full ION support, better capability with CAF, JB-camera, full support Adreno (KGSL), bla-bla-bla....
miroslav_mm said:
Yes of course. Full ION support, better capability with CAF, JB-camera, full support Adreno (KGSL), bla-bla-bla....
Click to expand...
Click to collapse
Alight thanks ... i found more specifics here: http://rootzwiki.com/topic/39958-what-is-the-value-of-the-linux-34-kernel/
I see you created the repo on your github, but as of now it is empty, will you be adding the content in the near future ? Would really like to compile a PAC build with it and try it out
Thanks and keep up the good work :good:
Yeah that's all cool but the thing I am hoping to see is more stability. The 2.6.35 kernel was very stable. The 3.0.x kernel is not so stable.
tdmcode said:
Yeah that's all cool but the thing I am hoping to see is more stability. The 2.6.35 kernel was very stable. The 3.0.x kernel is not so stable.
Click to expand...
Click to collapse
Dont know about 2.6.35, but 3.0.x not stable because all using CM kernel for base. CM kernel base on CAF sources, not on LG original sources.
3.4 working very good for me. Battery life and performance on Stock 4.1 are great without any dirty tweaks and patches in kernel!
miroslav_mm said:
Dont know about 2.6.35, but 3.0.x not stable because all using CM kernel for base. CM kernel base on CAF sources, not on LG original sources.
3.4 working very good for me. Battery life and performance on Stock 4.1 are great without any dirty tweaks and patches in kernel!
Click to expand...
Click to collapse
CM took the lu6200 ICS sources and added display stuff from caf.
The original lge ICS ota was unstable for all iproj devices.
I have a weak p930 that will be the judge of the new 3.4 kernel. It reboots about every 5 to 15 minutes under the ics kernel. I will try when I get sources... No sources, no install...
Can't wait to flash this once WiFi is working
I don't have unlimited data and use WiFi a lot.
Flashed this ROM. It looks very good except WIFI issue. Am now testing battery drain. Looking for WiFi fix.
I've been checking this thread every
Hour for a WiFi fix... I use this as a WiFi only device so the lackthereof is a killer right now for me... That being said if anyone has a lead on what's breaking it I would love to help find a fix for the problem. Really never thought we would see a jb release for our device from LG but I believe it will be a major stepping stone for future development of our P93x's. Once again I wanna thank miroslav and all the other great devs and tinkerers who bust their asses to make our phones into beasts, and I look forward to seeing what awesomeness will come with these recent leaks.
Sent from my LG-P930 using xda app-developers app
This thread is to keep the PAC-man development thread clean.
First check the PAC FAQ for Xperia RAY to see if your question has been anwsered there ---- orum.xda-developers.com/showthread.php?t=1965674
When posting in here all XDA forum rules apply as usual. This thread is to help eachother, please no flaming of any sort.
If you are not aware of the FORUM RULES click HERE
wedgess said:
This thread is to keep the PAC-man development thread clean.
First check the PAC FAQ for Xperia RAY to see if your question has been anwsered there ---- orum.xda-developers.com/showthread.php?t=1965674
When posting in here all XDA forum rules apply as usual. This thread is to help eachother, please no flaming of any sort.
If you are not aware of the FORUM RULES click HERE
Click to expand...
Click to collapse
The ROm is great and no random reboot. trying to daily use... for a couple question, it is support themes for CM10.1??
arc_n_krizt said:
The ROm is great and no random reboot. trying to daily use... for a couple question, it is support themes for CM10.1??
Click to expand...
Click to collapse
Finally some one who uses the Q&A.yes it should support AOKP/CM themes.
I'm thinking test your ROM, but whats is the kernel included in the zip file?
Lupus v11? 3.X Kernel?
The main post said dont work JB Camera (4.2.2). There is other camera app included in ROM (CM camera 4.1.2 perhaps) or we must install other third party camera app.
setup wizard pac-man
Hey I flashed the inkludet kernel and did a full wipe and installed the ROM. The Rom boots but then the Setup Wizard does not respond and I cant set upp my phone. A tested this tvice and then re downloadet the rom but got the same results.Is it only me or are others having the same problem Im comming from a nother JB 4.2.2. rom if that helps. I realy want to try this rom and a realy like your work, been using lupus kernel for a long time now. Thanks
device: Lt18i last rom: CM 10.1
ghostmirror said:
I'm thinking test your ROM, but whats is the kernel included in the zip file?
Lupus v11? 3.X Kernel?
The main post said dont work JB Camera (4.2.2). There is other camera app included in ROM (CM camera 4.1.2 perhaps) or we must install other third party camera app.
Click to expand...
Click to collapse
No its nAa kernel as I havent started on a 3.x kernel. Of course there is legacy camera like in cm10 included in the R no need to flash extras.
dimmalimm said:
Hey I flashed the inkludet kernel and did a full wipe and installed the ROM. The Rom boots but then the Setup Wizard does not respond and I cant set upp my phone. A tested this tvice and then re downloadet the rom but got the same results.Is it only me or are others having the same problem Im comming from a nother JB 4.2.2. rom if that helps. I realy want to try this rom and a realy like your work, been using lupus kernel for a long time now. Thanks
device: Lt18i last rom: CM 10.1
Click to expand...
Click to collapse
Others seem to be having no problems. Perhaps its something to do with gapps. I'm assuming you used full gapps. Try the mini or light version of gapps. So long as u done your full wipes I can't see any other reason. Maybe try flash ROM let it boot then go back to recovery and flash gapps.
Edit - OK so apparently light gapps just causes FC'ing I'll link to other gapps when I'm home.
i flashed this ROM with full Gapps in Xperia Arc S, and it's working really fine, until now had twice random reboots, but that's not really a problem to me.
other than that the ROM is awesome. :good:
Q: is it okay if i use Lupus JBv11 Kernel? (qurrently using kernel included in ROM)
thanks in advance
Bagne said:
i flashed this ROM with full Gapps in Xperia Arc S, and it's working really fine, until now had twice random reboots, but that's not really a problem to me.
other than that the ROM is awesome. :good:
Q: is it okay if i use Lupus JBv11 Kernel? (qurrently using kernel included in ROM)
thanks in advance
Click to expand...
Click to collapse
See I'm pretty sure its the kernel giving random reboots. But with LuPuS or Fusion kernel, WiFi and Bluetooth will not work on 4.2.
Hey, one question:
Why the Wifi doesn't work on LuPuS or FusioN Kernel? :/
I#m using Paranoidmod now, because od that...
LuPuS Kernel v11 by wedgess + P.A.C.man by wedgess = Doesn't work?
Bobby2013 said:
Hey, one question:
Why the Wifi doesn't work on LuPuS or FusioN Kernel? :/
I#m using Paranoidmod now, because od that...
LuPuS Kernel v11 by wedgess + P.A.C.man by wedgess = Doesn't work?
Click to expand...
Click to collapse
All 4.2 ROMs changed firmware binaries and changed wifiload script. But... suppose I could try get get kernel to install and use old firmware binaries and run lupus wifiload script?? We will see!! maybe I'll push back kernel update until I give it a go and get someone to test.
wedgess said:
All 4.2 ROMs changed firmware binaries and changed wifiload script. But... suppose I could try get get kernel to install and use old firmware binaries and run lupus wifiload script?? We will see!! maybe I'll push back kernel update until I give it a go and get someone to test.
Click to expand...
Click to collapse
Okay that would be very nice
And if you'll need a tester I will be your man
Thanks very much
EDIT: The LuPuS kernel works nearly perfect with Paranoidrom, but not with CM10.1, PAC and AOKP...really?!
Bobby2013 said:
Okay that would be very nice
And if you'll need a tester I will be your man
Thanks very much
EDIT: The LuPuS kernel works nearly perfect with Paranoidrom, but not with CM10.1, PAC and AOKP...really?!
Click to expand...
Click to collapse
Paranoid was last updated before 3.x kernels were released.
Sent from my PAC-ed LT18i.
Press the thanks button if I helped.
wedgess said:
No its nAa kernel as I havent started on a 3.x kernel. Of course there is legacy camera like in cm10 included in the R no need to flash extras.
Others seem to be having no problems. Perhaps its something to do with gapps. I'm assuming you used full gapps. Try the mini or light version of gapps. So long as u done your full wipes I can't see any other reason. Maybe try flash ROM let it boot then go back to recovery and flash gapps.
Edit - OK so apparently light gapps just causes FC'ing I'll link to other gapps when I'm home.
Click to expand...
Click to collapse
I instal the ROM with full gapps and it is running fine now. In one day of testing I got one fc and one random reeboot. Thanks for the info.
Sent from my Xperia Arc S using xda app-developers app
wedgess said:
All 4.2 ROMs changed firmware binaries and changed wifiload script. But... suppose I could try get get kernel to install and use old firmware binaries and run lupus wifiload script?? We will see!! maybe I'll push back kernel update until I give it a go and get someone to test.
Click to expand...
Click to collapse
yea do this as soon as possible. 2.6 kernel + cm10.1 = Super Awesome and stable
Sent from my Xperia Arc using xda premium
Hi,
May I also post on the Pro version here? There is no seperate thread for it.
It's my first attempt on a custom rom after using stock ICS. Unfortunately, I found it to be very unstable
My first attempt was Lupus/v21, now I'm on Fusion/v22. Both seem to be highly unstable. Just using apps is normally fine, but a few things seem to provoke lockups including unlocking the screen, listening to music and using the camera.
I did a full wipe before installing (system, cache, dalvik cache, data), I even tried the permissions fix.
Otherwise it seems a great rom, perfect feature set and very fast, but the unstability makes it unusable for me
Sent from my Xperia Pro using xda app-developers app
theNfan said:
Hi,
May I also post on the Pro version here? There is no seperate thread for it.
It's my first attempt on a custom rom after using stock ICS. Unfortunately, I found it to be very unstable
My first attempt was Lupus/v21, now I'm on Fusion/v22. Both seem to be highly unstable. Just using apps is normally fine, but a few things seem to provoke lockups including unlocking the screen, listening to music and using the camera.
I did a full wipe before installing (system, cache, dalvik cache, data), I even tried the permissions fix.
Otherwise it seems a great rom, perfect feature set and very fast, but the unstability makes it unusable for me
Sent from my Xperia Pro using xda app-developers app
Click to expand...
Click to collapse
Yes u can post here also. Comparing any 4.2 ROM to STOCK ICS, stock ICS would be the winner in terms of stability. 4.1 is the best if you want JB IMO. But 4.2 and especially PAC 4.2 has a lot more features, customization amongst other things. It doesn't matter on the kernel its going to be the same. This is why FXP stopped developing after CM10 for the XPERIA 2011 line-up. It will never be 100% stable as will any 4.2 ROM for Xperia 2011.
I don't know what calls you stabillity, but 4.1 is very stable, almost as 4.0. 4.2 isn't stable specially with 3.x kernels, but 4.1 is perfect. And FXP stop the development for 2011 line becase they have to develop for a lot of devices, i think.
sinholueiro said:
I don't know what calls you stabillity, but 4.1 is very stable, almost as 4.0. 4.2 isn't stable specially with 3.x kernels, but 4.1 is perfect. And FXP stop the development for 2011 line becase they have to develop for a lot of devices, i think.
Click to expand...
Click to collapse
I said 4.1 is stable. And no they stopped because without a stable 3.x kernel it would be impossible for a stable 4.2 J. There was no 3.x kernel for 2011 device back then, but even still they knew if there was a 3.x kernel it would need a lot of work to get stable, if it even can.
wedgess said:
I said 4.1 is stable. And no they stopped because without a stable 3.x kernel it would be impossible for a stable 4.2 J. There was no 3.x kernel for 2011 device back then, but even still they knew if there was a 3.x kernel it would need a lot of work to get stable, if it even can.
Click to expand...
Click to collapse
But 3.4 kernel is pretty stable now na?
I think that crapy random reboot is the only problem now.
Sent from my arc s using xda premium
jithuelad said:
But 3.4 kernel is pretty stable now na?
I think that crapy random reboot is the only problem now.
Sent from my arc s using xda premium
Click to expand...
Click to collapse
yes and that's instability my friend
Sent from my Xperia Arc S using xda premium
Hi I am new to rom and kernel flashing, and I am interested in flashing the ElementalX 1.1 kernel on AOKP. I love AOKP, and I am way interested in the swipe-to-wake and double-tap-to-wake features of ElementalX 1.1.
What kinds of things do I need to know about compatibility between kernels and Roms? Can you typically use any kernel with any rom?
Loving the Nexus experience and looking forward to learning more!
They often can but not always.
Android versions need to match.
Usually you can flash any kernel on any ROMs but if its a CM based ROM and you flash a custom kernel then slimport features sometimes don't work or some times you flash a custom kernel then the boot animation gets cut and turns black it doesn't really matter I have done lots of flashing and I would say that every kernel can be a flashed with any ROM without problems I am currently on CM kang and using kernel elemental x and everything runs smooth..hope this help click thankksss
Don't just slap any kernel to your device you might seriously brick it.....learned this lesson when I had an Atrix4G.....
sk8trix said:
Don't just slap any kernel to your device you might seriously brick it.....learned this lesson when I had an Atrix4G.....
Click to expand...
Click to collapse
Nexus devices are different then the Atrix4G. You can not seriously brick it by flashing an incompatible kernel. Even having no kernel will not prevent you from accessing the bootloader and recovery.
Hi,
I would like to make a few small modification in the stock kernel.
At this moment I don't want to switch to any custom ROM.
Could you tell me how I can get the official source code (or maybe the OpenKirin will work?) and create a flashable zip?
Thanks
hawk_king said:
Hi,
I would like to make a few small modification in the stock kernel.
At this moment I don't want to switch to any custom ROM.
Could you tell me how I can get the official source code (or maybe the OpenKirin will work?) and create a flashable zip?
Thanks
Click to expand...
Click to collapse
If you want to do it yourself.
http://consumer.huawei.com/en/opens...Type=openSourceSoftware&pageSize=10&curPage=1
Sent from my Honor 8 pro using Tapatalk
Is this the latest kernel? Currently I'm running kernel 4.1.18-g83d04d8, probably this version is older...
I think I will manage to compile it, is it enough to replace the kernel image on my honor with the compiled one?
I want to have a possibility to revert this change.