{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Flashtool 0.9.15 by @Androxyde
XZDualRecovery 2.7.90 BETA or newer.
Current rooted FW version: 14.3.A.0.681.
Special features:
SuperSU integrated in system, FULL ROOT!
XZDualRecovery 2.7.115 BETA (CWM & PhilZ Touch & TWRP) pre-installed;
init.d support (read how to enable)
For both locked and unlocked bootloaders!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
If you are unable to download torrent files directly, have http://zbigz.com/ do it for you!
How to update to 14.3.A.0.757:
Files (Find them on the DevDB Download tab!):
For C6902: Download C6902_14.3.A.0.757.flashable.zip (1004MB) and C6902_14.3.A.0.757_Stripped.ftf (21MB)
For C6903: Download C6903_14.3.A.0.757.flashable.zip (893MB) and C6903_14.3.A.0.757_Stripped.ftf (21MB)
For C6906: Download C6906_14.3.A.0.757.flashable.zip (952MB) and C6906_14.3.A.0.757_Stripped.ftf (21MB)
For C6943: Download C6943_14.3.A.0.757.flashable.zip (985MB) and C6943_14.3.A.0.757_Stripped.ftf (21MB)
Save them somewhere you remember;
Put 'C69XX_14.3.A.0.757.flashable.zip' on (the external) SDcard1;
Put 'C69XX_14.3.A.0.757_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in TWRP and don't forget to backup the contents of 'SDCard' (the internal storage!);
Flash 'C69XX_14.3.A.0.757.flashable.zip' in TWRP (if you notice your phone reboot during the update process, update to the latest XZDualRecovery and try again);
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C69XX_14.3.A.0.757_Stripped.ftf' using flashtool;
Reboot to system.
The first boot will be slow and after some time at the boot animation you will see Android start optimizing the apps on your phone.
Enjoy! :laugh:
Want to De-ODEX your ROM?
@RyokoN has kindly provided a flashable package for this purpose, download it here (MEGA Download). Make sure you wipe the DALVIK-CACHE after you flash it.
@RHBH has also created a deodex package and will do so for all variant releases. Check out his thread here.
Need some help?
@shem2409 has made a video guide to aid you in the update process:
Thanks buddy, great work, as always!
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore any JB 4.2.2 FTF using any means you are familiar with so you can try again.
Root it using any means you are familiar with.
Install XZDualRecovery;
Update to 14.2.A.1.136;
Then try to update again using TWRP.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /sdcard1/XZDualRecovery, pack them up and send them to me or attach them to your bug report.
Thank you
XDA:DevDB Information
[STOCK][C69XX][4.4] Update to 14.3.A.0.757 [Root & XZDR][DE-/ODEX], ROM for the Sony Xperia Z1
Contributors
[NUT], RyokoN, RHBH
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 14.3.A.0.681
Based On: STOCK
Version Information
Status: Abandoned
Stable Release Date: 2014-04-11
Beta Release Date: 2014-04-10
Created 2014-04-10
Last Updated 2014-08-20
What version of rom is your flasheable zip?
GLOBAL, ?
Enviado desde mi C6903 mediante Tapatalk
Will try this tonight after work. Good job nut!!!
Sent from my C6903 using xda premium
I have few questions:
Currently I have C6903 Xperia Z1
4.2.2 (JB) with XZ-lockeddualrecovery2.7.75 and locked bootloader
1. There is no way to update directly from rooted 14.1.G.2.257 to 14.3.A.0.757? If not what is order updates? .290 >> .136 >> .681?
2. Can I use this DualRecovery: Z1-lockeddualrecovery2.7.115-BETA.installer.zip (10.18MB) or i need another version?
3. I must first uninstall my old recovery and after that install new version?
Downloading
Sent from my C6903 using xda app-developers app
volteretero said:
What version of rom is your flasheable zip?
GLOBAL, ?
Enviado desde mi C6903 mediante Tapatalk
Click to expand...
Click to collapse
I think euro LTE. I'm not sure
Sent from my C6903 using Tapatalk
Installed.
Can confirm sound bug is gone and root is saved
Thank you @[NUT]
Blizz1982 said:
I have few questions:
Currently I have C6903 Xperia Z1
4.2.2 (JB) with XZ-lockeddualrecovery2.7.75 and locked bootloader
1. There is no way to update directly from rooted 14.1.G.2.257 to 14.3.A.0.757? If not what is order updates? .290 >> .136 >> .681?
2. Can I use this DualRecovery: Z1-lockeddualrecovery2.7.115-BETA.installer.zip (10.18MB) or i need another version?
3. I must first uninstall my old recovery and after that install new version?
Click to expand...
Click to collapse
Don't complicate things Mr.
You're already rooted, with recovery. That's all that matters. You don't need to uninstall recovery and all that.
This is how I did mine.
Backup your Internet memory onto your pc or onto your ext sd card. (wiping it is safer for me for 100% no causes of problems).
Download the latest which is. 757
Place in your ext sd card.
Download the stripped FTF and place in the firmware folder of flashtool
(update flashtool from 0.9.13 to 0.9.15 please as it will give your error if you use the old one).
Boot your .290 to recovery, wipe everything except your external sd card.
Install. 757 and don't reboot yet. Just power off.
Go to flashtool and flash the stripped FTF.
Boot and enjoy.
Sent from my C6903 using Tapatalk
volteretero said:
What version of rom is your flasheable zip?
GLOBAL, ?
Enviado desde mi C6903 mediante Tapatalk
Click to expand...
Click to collapse
+1
slimldj said:
Don't complicate things Mr.
You're already rooted, with recovery. That's all that matters. You don't need to uninstall recovery and all that.
This is how I did mine.
Backup your Internet memory onto your pc or onto your ext sd card. (wiping it is safer for me for 100% no causes of problems).
Download the latest which is. 757
Place in your ext sd card.
Download the stripped FTF and place in the firmware folder of flashtool
(update flashtool from 0.9.13 to 0.9.15 please as it will give your error if you use the old one).
Boot your .290 to recovery, wipe everything except your external sd card.
Install. 757 and don't reboot yet. Just power off.
Go to flashtool and flash the stripped FTF.
Boot and enjoy.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
But NUT give higher requirements... I Think that I have too old recovery for upgrade to KK roms. I have 75, NUT Said 90 or newer...
slimldj said:
Boot your .290 to recovery, wipe everything except your external sd card.
Click to expand...
Click to collapse
Currently I have 257. Should i upgrade first to 290?
Blizz1982 said:
But NUT give higher requirements... I Think that I have too old recovery for upgrade to KK roms. I have 75, NUT Said 90 or newer...
Currently I have 257. Should i upgrade first to 290?
Click to expand...
Click to collapse
Just install the newest recovery over your old one. It's ok.
You don't have to upgrade to 290 first. Just download the above files and directly upgrade to 757.
Sent from my C6903 using Tapatalk
Blizz1982 said:
But NUT give higher requirements... I Think that I have too old recovery for upgrade to KK roms. I have 75, NUT Said 90 or newer...
Click to expand...
Click to collapse
Well if that's what it states, it's fairly the easiest thing to do. Update to 90 by downloading the flasheable one.
Flash it, reboot back to recovery and follow the process to update to 757
Sent from my C6903 using Tapatalk
Blizz1982 said:
Z1-lockeddualrecovery2.7.115-BETA.installer.zip (10.18MB)
Click to expand...
Click to collapse
This is good version for my Z1?
(Locke bootloader c6903)
downloading
Nice work Mon Ami
Sent from my C6903 using XDA Premium 4 mobile app
Flashing was ok.
Spotting the apos I had deleted was easy: I made a backup with titanium before flashing, so when launching again titanium after flashing, it lists on top all apps with no backups.
Now I am restoring all backups: there are some com.android.xyz apps that seems have been removed, maybe just newer versions in this update?
Waiting version C6902 to be released ")
I have a C6902 waiting on nut to release it. I am currently on NUT .136 and i will update as soon as he releases it. What are the steps? I have UB and rooted already.
Shiiiiiiiiiiiiiiiiiiiiiiiiiiitttttttttttttttt!
Dunno why but restoring backups from titanium, moved all my Chrome favourites to MOBILE FAVOURITES in one single list!!! Why?!
is there a way to put all them in place?
This is new.......
Sent from my C6903 using Tapatalk
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Flashtool 0.9.13 by @Androxyde
XZDualRecovery 2.7.76 BETA or newer.
Current rooted FW version: 14.2.A.0.290 .
Special features:
SuperSU integrated in system, FULL ROOT!
XZDualRecovery 2.7.80 BETA (CWM & PhilZ Touch & TWRP) pre-installed;
init.d support (read how to enable)
For both locked and unlocked bootloaders!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
If you are unable to download torrent files directly, have http://zbigz.com/ do it for you!
How to update to 14.2.A.1.136:
Files:
For C6902: Download C6902_14.2.A.1.136.flashable.zip (Bittorrent: 926MB) and C6902_14.2.A.1.136_Stripped.ftf (21MB)
For C6903: Download C6903_14.2.A.1.136.flashable.zip (Bittorrent: 806MB) and C6903_14.2.A.1.136_Stripped.ftf (21MB)
For C6906: Download C6906_14.2.A.1.136.flashable.zip (Bittorrent: 872MB) and C6906_14.2.A.1.136_Stripped.ftf (21MB)
For C6943: Download C6943_14.2.A.1.136.flashable.zip (Bittorrent: 889MB) and C6943_14.2.A.1.136_Stripped.ftf (21MB)
Save them somewhere you remember;
Put 'C69XX_14.2.A.1.136.flashable.zip' on (the external) SDcard1;
Put 'C69XX_14.2.A.1.136_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in TWRP and don't forget to backup the contents of 'SDCard' (the internal storage!);
Flash 'C69XX_14.2.A.1.136.flashable.zip' in TWRP;
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C69XX_14.2.A.1.136_Stripped.ftf' using flashtool;
Reboot to system.
The first boot will be slow and after some time at the boot animation you will see Android start optimizing the apps on your phone.
Enjoy! :laugh:
Unlocked bootloader?
To be able to use this ROM without any special tweaking, download C6903_14.2.A.1.136_kernel.img and
Code:
fastboot flash boot C6903_14.2.A.1.136_kernel.img
Or use flashtool to flash it.
It is a kernel repack, with only one change. To confirm you are running this kernel, check if the file '/nuts_repack' exists.
DE-ODEX your ROM!
Make sure you have the flashable ROM installed before you do this.
Download C6903_14.2.A.1.136_deodex.zip (Bittorrent: 412MB), save it somewhere you remember;
Put 'C6903_14.2.A.1.136_deodex.zip' on (the external) SDcard1;
Create a backup of your phone in CWM or TWRP and don't forget to backup the contents of 'SDCard0';
Flash 'C6903_14.2.A.1.136_deodex.zip' in recovery, do not reboot but go back to the main menu;
Clear dalvik-cache ONLY;
Reboot to system.
The first boot after flashing this you will see Android optimizing the apps on your phone, this might take a while... but should be just fine
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore any JB 4.2.2 FTF using any means you are familiar with so you can try again.
Root it using any means you are familiar with.
Install XZDualRecovery;
Update to 14.2.A.0.290;
Then try to update again using TWRP.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /sdcard1/XZDualRecovery, pack them up and send them to me or attach them to your bug report.
Thank you
XDA:DevDB Information
[STOCK][C69XX][4.3] Update to 14.2.A.1.136 [Root & XZDR][LB/UB][DE-/ODEX], a ROM for the Sony Xperia Z1
Contributors
[NUT]
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 14.2.A.0.290
Based On: STOCK
Version Information
Status: Stable
Stable Release Date: 2014-01-31
Created 2014-01-29
Last Updated 2014-02-01
FAQ & Tips and Tricks
Easy switching between locked and unlocked bootloader states!
NOTE: USE TWRP ONLY for this guide.
NOTE 2: You NEED to have XZDualRecovery 2.7.43 or higher to make this work.
Create a backup, including the Trim Area (TA!)
Unlock your bootloader
Restore backup without TA
Create a new backup of your UNLOCKED TA
Restore the previous TA backup to relock your phone.
Done :good:
Now you can switch between locked and unlocked bootloaders quick and painless: no more system wipes and you can basically do whatever you want
How to enable init.d support:
Open a filemanager app and navigate to the location where the XZDualRecovery folder is located and go in to it. Open XZDR.prop as a text file and set dr.initd.active to true.
NOTE: For this guide ROM it means the init.d script called 99SuperSUDaemon will kick in to action, so it's best to disable (by setting chmod 644) /system/etc/install-recovery.sh for the time being or to clear it's contents.
Done
Downgrading to a 4.2 ROM:
Download C6903_14.1.G.1.534_[NUT].ftf (Bittorrent: 770MB) and flash it using FlashTool. I've also added the FTF to the downloads page on this DevDB tab, this will allow straight downloads as well.
This FTF will allow you to downgrade to .534 without loss of your IMEI :good:
Thanks to @mharckk and @MohammadAG for the workaround which contributed to the creation of this FTF.
ROM STATUS: STABLE
At this moment, running out of time to sleep before work tomorrow, I have to put this online still with a SEMI-ROOT
Fortunately recovery is working well, so I will be able to release a simple patch once I crack this one :good:
No patch required, it was my sleep deprived stupidity which resulted in a stupid mistake!
Hahaaaa nice work mon ami ^_^
Sent from my GT-I9505 using XDA Premium 4 mobile app
I'm not much of a developer, but there is one thing im good at seeding! :good:
@[NUT] it just have SEMI Root???
Another RIC must to crack??
Thank you @[NUT]. You're awesome
Sent from my C6903 using Tapatalk
Is this normal, in this case to have /system without RW ?
binoslaw said:
Is this normal, in this case to have /system without RW ?
Click to expand...
Click to collapse
For this version, yes... Will try to find a solution tonight...
The rom is fine to use and some root tasks can still be performed, using recovery you are able to install just about everything... Provided it is flashable of course
Yes, I know. BTW great work. I need RW because I would like to uninstall some apps.
Anyway. I'm waiting for Your magic.
Sent from my C6903 using XDA Premium 4 mobile app
binoslaw said:
Yes, I know. BTW great work. I need RW because I would like to uninstall some apps.
Anyway. I'm waiting for Your magic.
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can use twrp for that too you know
Boot twrp, mount system, go to advanced and then the file manager. Navigate to system/app and tap all files you want to do something with... :highfive:
Will /system remount work on an Unlocked Bootloader?
mynameisjon said:
Will /system remount work on an Unlocked Bootloader?
Click to expand...
Click to collapse
Only with a patched ramdisk on the stock kernel I'm afraid... I can do that though, it's not that hard
If anyone wants a patched ramdisk-kernel for this ROM, let me know. I won't integrate a recovery though, just the RW patch.
BIG NOTE: it is intended for use on an UNLOCKED BOOTLOADER ONLY then ... just FYI
Because of your question @mynameisjon I reallized that with the guide in post #2, it should be fairly easy to switch between locked and unlocked TA+kernel sets
[NUT] said:
Only with a patched ramdisk on the stock kernel I'm afraid... I can do that though, it's not that hard
If anyone wants a patched ramdisk-kernel for this ROM, let me know. I won't integrate a recovery though, just the RW patch.
BIG NOTE: it is intended for use on an UNLOCKED BOOTLOADER ONLY then ... just FYI
Because of your question @mynameisjon I reallized that with the guide in post #2, it should be fairly easy to switch between locked and unlocked TA+kernel sets
Click to expand...
Click to collapse
Would be awesome if you could provide the ramdisk-kernel. I'm assuming that it's a boot.img and that I'd have to install the dual recovery seperately?
[NUT] said:
Only with a patched ramdisk on the stock kernel I'm afraid... I can do that though, it's not that hard
If anyone wants a patched ramdisk-kernel for this ROM, let me know. I won't integrate a recovery though, just the RW patch.
BIG NOTE: it is intended for use on an UNLOCKED BOOTLOADER ONLY then ... just FYI
Because of your question @mynameisjon I reallized that with the guide in post #2, it should be fairly easy to switch between locked and unlocked TA+kernel sets
Click to expand...
Click to collapse
For Locked booloader you can use the same root method of 259?
mynameisjon said:
Would be awesome if you could provide the ramdisk-kernel. I'm assuming that it's a boot.img and that I'd have to install the dual recovery seperately?
Click to expand...
Click to collapse
Correct. But if you use my ROM package, recovery will already have been integrated.
fer2503 said:
For Locked booloader you can use the same root method of 259?
Click to expand...
Click to collapse
I'm assuming you mean .290? Well... that same method has been applied in this ROM... but to no avail unfortunately, it needs some updating unfortunately.
Yes, you are right, i mean 290. I Hope you Can find a solution
[NUT] said:
Correct. But if you use my ROM package, recovery will already have been integrated.
Click to expand...
Click to collapse
Does an unlocked bootloader still require flashing the stripped package?
mynameisjon said:
Does an unlocked bootloader still require flashing the stripped package?
Click to expand...
Click to collapse
Yes sir, it contains all the bits the flashable zip can not flash. I did not check if the kernel itself changed to be honest, so maybe this ROM will work fine on any .290 kernel... but i still need to test that.
Loads of stuff to do tonight
If you want to use any stock based custom rom from big brother Z1 you need:
already rooted stock rom
installed recovery
my patch
SuperSu update pack
14.2.A.1.142 firmware for Z1 Compact (MD5: 082456FEC0E4F99659BFB453148BFBBF) with flashtool
and flashable custom rom from Z1 based on 14.2.A.1.136 firmware.
How to install:
place custom rom (for example from monx), my patch and SuperSu on your sdcard or phone memory
boot recovery
flash custom rom with wipes, then my patch, then supersu
turn off phone
flash 4.2.A.1.142 firmware via flashtool like that
View attachment 2610572
boot phone
enjoy
UPD: Patch_D5503_14.3.A.0.757.zip 23.7 MB for KK based customs...and use any 14.3.A.0.757 ftf for instruction
UPD2: Desperanto_Patch_D5503__14.4.A.0.108_TWRP720p.zip 16.3 MB for 108 base...and use any 14.4.A.0.108 ftf for instruction
Thx @[NUT] for his recovery pack
I don't have Z1 Compact and I can't test patch with all roms. My tester tested it with general stock based roms. Because of it I can't say you will it work with ported roms or not.
Sorry for my bad english
ROM: very clean and light stock rom with some tweaks
D5503_14.4.A.0.108_PCT_Sony.ftf 964.0 MB download from mega
===============================================
Desperanto_C6903_14.4.A.0.108_v.1.1.zip 631.6 MB download from mega | mirror
md5: 99458526F15E2667F75196AE40D38632
===============================================
Desperanto_Patch_D5503__14.4.A.0.108_TWRP720p.zip 16.3 MB download from mega
===============================================
Stock kernel with TWRP: download from mega | mirror installing via recovery
===============================================
Stock fonts installing via recovery.
===============================================
DeletedApps_14.4.A.0.108.zip 117.6 MB download from mega
use instruction upper
XDA:DevDB Information
[Patch]+[ROM]+[Kernel] for Z1 stock based cutom ROMs to work on Z1 Compact (108 base), ROM for the Sony Xperia Z1 Compact
Contributors
Desperanto86
ROM OS Version: 4.4.x KitKat
Version Information
Status: Testing
Created 2014-10-23
Last Updated 2014-10-23
Desperanto86 said:
If you want to use any custom rom from big brother Z1 you need:
already rooted stock rom
installed recovery
my patch
SuperSu update pack
14.2.A.1.142 firmware for Z1 Compact with flashtool
and flashable custom rom from Z1 based on 14.2.A.1.136 firmware.
How to install:
place custom rom (for example from monx), my patch and SuperSu on your sdcard or phone memory
boot recovery
flash custom rom, then my patch, then supersu
turn off phone
flash 4.2.A.1.142 firmware via flashtool like that
View attachment 2610572
boot phone
enjoy
Thx @[NUT] for his recovery pack
Sorry for my bad english
Click to expand...
Click to collapse
So, even AOSP ROMs are possible? I.e. CM\AOKP and etc? Or only stock based ROMs?
TheQwertiest said:
So, even AOSP ROMs are possible? I.e. CM\AOKP and etc? Or only stock based ROMs?
Click to expand...
Click to collapse
Tested only stock based. About AOSP don't know...but you can try but you should edit it...because there stock build.prop and its not compatible with AOSP
Cool
This sounds really awesome, but I am not sure if am brave enough to try this. Are there any chances of bricking my phone? Has someone else tried this and can tell me his experience with it, does the new rom work flawlessly?
Desperanto86 said:
Tested only stock based. About AOSP don't know...but you can try but you should edit it...because there stock build.prop and its not compatible with AOSP
Click to expand...
Click to collapse
You can't unless somebody compiles a AOSP kernel.
thesofty said:
This sounds really awesome, but I am not sure if am brave enough to try this. Are there any chances of bricking my phone? Has someone else tried this and can tell me his experience with it, does the new rom work flawlessly?
Click to expand...
Click to collapse
Yep, tester is here
I've tested that patch, now have this ROM installed yesturday and want to use it before this weekend. First impressions -- it's awesome! Everything works fine.
This ROM was installed at DooMLoRD's kernel
About bricking -- I have an error while installing first build. IMHO, for now maximum possible damage is soft-brick, that can be fixed with your nandriod backup or flashing via Flashtool
I been using ihackers ROM for a few weeks without this just by editing the aroma and recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my D5503 using Tapatalk
tr1gg3r84 said:
I been using ihackers ROM for a few weeks without this just by editing the aroma and recovery View attachment 2611247
Sent from my D5503 using Tapatalk
Click to expand...
Click to collapse
What exactly did you edit to make ihackers work?
Yes please show me how
Sent from my D5503 using XDA Premium 4 mobile app
Deleting some of the aroma that's made for the Z1 devices firmware. Replace the Recovery's and delete I hacker kernel and replace doom kernel with D5503 version. Replace build.prop with D5503 that's pretty much it, then added my own mods
Sent from my D5503 using Tapatalk
Think we can get the GPE port of the Z ultra that was ported to the Z1 ported to our Z1c?
Hi, I would like to use the iHacker rom built for the Z1, if I flash this (with the patch) does it mean that the kernel is still stock and I don't loose DRM functions?
Step 5 of your instuctions 'flash 4.2.A.1.142 firmware via flashtool' what options do we have to select with the flashtool? what do we wipe/exclude?
I have already rooted my Z1c and backed up the TA partition, the bootloader is still locked so am looking for a way to try and get a custom rom installed.
Thanks
Edit: just seen the picture for which options in flashtool, wish I'd read the OP properly, doh
If I understand the process correctly the last step flashes the whole of the latest z1c firmware except the system partition so you end up with the stock z1c firmware and the patched dystem partition containing the custom rom. Not tried it myself yet but will give it a go once I've rooted.
Sent from my D5503 using xda app-developers app
twilliams08 said:
If I understand the process correctly the last step flashes the whole of the latest z1c firmware except the system partition so you end up with the stock z1c firmware and the patched dystem partition containing the custom rom. Not tried it myself yet but will give it a go once I've rooted.
Sent from my D5503 using xda app-developers app
Click to expand...
Click to collapse
yes, you are right
Thank you so much for this patch. I have a hard time deciding between monox and ihackers rom : )
14.2.A.1.142 firmware for Z1 Compact could you share the MD5 signature please; it's a huge file and therefore more chances of a corrupt download.
wind0zer said:
could you share the md5 signature please
Click to expand...
Click to collapse
crc32: D2650cf6
md5: 082456fec0e4f99659bfb453148bfbbf
sha-1: Dc395434147bb0249d02ac372456b3e2deb62cf5
I tested this and it doesn't completely work.
About shows baseband version as unknown
No SIM detected and Wifi stuck at turning on
Although the monx custom rom has reboot options, power long-press shows stock options.
Powering off hangs indefinitely with progress meter running.
tr1gg3r84 said:
Deleting some of the aroma that's made for the Z1 devices firmware. Replace the Recovery's and delete I hacker kernel and replace doom kernel with D5503 version. Replace build.prop with D5503 that's pretty much it, then added my own mods
Click to expand...
Click to collapse
A more detailed guide in the General section wouldn't go a miss.
wind0zer said:
I tested this and it doesn't completely work.
About shows baseband version as unknown
No SIM detected and Wifi stuck at turning on
Although the monx custom rom has reboot options, power long-press shows stock options.
Powering off hangs indefinitely with progress meter running.
Click to expand...
Click to collapse
try flash 114 firmware without system partition
I have many testers with monx rom and all works fine
Anyone test on aosp roms?
Sent from my SM-N9005 using XDA Premium 4 mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Flashtool 0.9.15 by @Androxyde
XZDualRecovery 2.7.90 BETA or newer.
Current rooted FW version: 14.2.A.0.290 or 14.2.A.1.136 .
Special features:
SuperSU integrated in system, FULL ROOT!
XZDualRecovery 2.7.99 BETA (CWM & PhilZ Touch & TWRP) pre-installed;
init.d support (read how to enable)
For both locked and unlocked bootloaders!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
If you are unable to download torrent files directly, have http://zbigz.com/ do it for you!
OLD DOWNLOAD ROM PATCH:
C69XX_14.3.A.0.681.patch.zip (9.15MB)
Download, unpack, run the install.bat and follow instructions.
For anyone who runs in to issues using the patch installer, take the zip file from the files directory and try to flash that manually.
Click to expand...
Click to collapse
How to update to 14.3.A.0.681:
Files:
For C6902: Download C6902_14.3.A.0.681.flashable.zip (Bittorrent: 1000MB) and C6902_14.3.A.0.681_Stripped.ftf (21MB)
For C6903: Download C6903_14.3.A.0.681.flashable.zip (Bittorrent: 934MB) and C6903_14.3.A.0.681_Stripped.ftf (21MB)
For C6906: Download C6906_14.3.A.0.681.flashable.zip (Bittorrent: 956MB) and C6906_14.3.A.0.681_Stripped.ftf (21MB)
For C6943: Download C6943_14.3.A.0.681.flashable.zip (Bittorrent: 983MB) and C6943_14.3.A.0.681_Stripped.ftf (21MB)
Save them somewhere you remember;
Put 'C69XX_14.3.A.0.681.flashable.zip' on (the external) SDcard1;
Put 'C69XX_14.3.A.0.681_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in TWRP and don't forget to backup the contents of 'SDCard' (the internal storage!);
Flash 'C69XX_14.3.A.0.681.flashable.zip' in TWRP;
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C69XX_14.3.A.0.681_Stripped.ftf' using flashtool;
Reboot to system.
The first boot will be slow and after some time at the boot animation you will see Android start optimizing the apps on your phone.
Enjoy! :laugh:
Want to deodex?
Use the packages from this thread by @RHBH :good:
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore any JB 4.2.2 FTF using any means you are familiar with so you can try again.
Root it using any means you are familiar with.
Install XZDualRecovery;
Update to 14.2.A.1.136;
Then try to update again using TWRP.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /sdcard1/XZDualRecovery, pack them up and send them to me or attach them to your bug report.
Thank you
XDA:DevDB Information
[STOCK][C69XX][4.4] Update to 14.3.A.0.681 [Root & XZDR][UPDATED], a ROM for the Sony Xperia Z1
Contributors
[NUT]
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 14.2.A.0.290 or 14.2.A.1.136
Based On: STOCK
Version Information
Status: Beta
Stable Release Date: 2014-03-26
Beta Release Date: 2014-03-20
Created 2014-03-20
Last Updated 2014-03-27
FAQ & Tips and Tricks
Camera problems?
You have 3 things to try to fix it, try them one at a time:
Clear dalvik-cache only;
Clear the camera app settings;
Do a factory reset in TWRP or PhilZ (this should keep your internal storage safe);
flash the ROM package again;
boot until you can test the camera;
If it works go back to recovery to restore a backup of data.
Easy switching between locked and unlocked bootloader states!
NOTE: USE TWRP ONLY for this guide.
NOTE 2: You NEED to have XZDualRecovery 2.7.43 or higher to make this work.
Create a backup, including the Trim Area (TA!)
Unlock your bootloader
Restore backup without TA
Create a new backup of your UNLOCKED TA
Restore the previous TA backup to relock your phone.
Done :good:
Now you can switch between locked and unlocked bootloaders quick and painless: no more system wipes and you can basically do whatever you want
How to enable init.d support:
Open a filemanager app and navigate to the location where the XZDualRecovery folder is located and go in to it. Open XZDR.prop as a text file and set dr.initd.active to true.
NOTE: For this guide ROM it means the init.d script called 99SuperSUDaemon will kick in to action, so it's best to disable (by setting chmod 644) /system/etc/install-recovery.sh for the time being or to clear it's contents.
Done
Downgrading to a 4.2 ROM:
Download C6903_14.1.G.1.534_[NUT].ftf (Bittorrent: 770MB) and flash it using FlashTool. I've also added the FTF to the downloads page on this DevDB tab, this will allow straight downloads as well.
This FTF will allow you to downgrade to .534 without loss of your IMEI :good:
Thanks to @mharckk and @MohammadAG for the workaround which contributed to the creation of this FTF.
rom status: STABLE
Nothing for the c6906 yet? However, thanks nut you everytime making us happy ? ? ?
Sent from my C6906 using Tapatalk
Wow ^_^ nice work dude
Sent from my GT-I9505 using XDA Premium 4 mobile app
Where is XZDualRecovery 2.7.76 BETA?
jancarlos1597 said:
Nothing for the c6906 yet? However, thanks nut you everytime making us happy ? ? ?
Sent from my C6906 using Tapatalk
Click to expand...
Click to collapse
I found no FTF for the C6906 and C6943 versions yet... If anyone has a link to one for me, I'll be happy to add them
[NUT] said:
I found no FTF for the C6906 and C6943 versions yet... If anyone has a link to one for me, I'll be happy to add them
Click to expand...
Click to collapse
Okay bro I'll find you and I send it to you thanks.
Press thanks of I helped you
Sended from my Kitkat'fied C6906.
loveninecube said:
Where is XZDualRecovery 2.7.76 BETA?
Click to expand...
Click to collapse
"or newer"
@[NUT]
No deodex package yet?
Sent from my SGP311 using XDA Premium 4 mobile app
Destroyedbeauty said:
@[NUT]
No deodex package yet?
Sent from my SGP311 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No, @krabappel2548 said he would do one tomorrow, so I'll save me the trouble
[NUT] said:
"or newer"
Click to expand...
Click to collapse
Ofcourse I show it.
This version doesn't list to nut.xperia-files.com.
Standalone package of this build isn't release yet?
Waiting for C6906 [emoji53]
Enviado desde mi C6906 mediante Tapatalk
WOWW!! Thanks! Downloading!!
loveninecube said:
Ofcourse I show it.
This version doesn't list to nut.xperia-files.com.
Standalone package of this build isn't release yet?
Click to expand...
Click to collapse
Not yet, I'll upload the XZDR beta package as soon as the flashable zips are done uploading
Tony_GPR said:
WOWW!! Thanks! Downloading!!
Click to expand...
Click to collapse
no seed to me
zyclops1 said:
no seed to me
Click to expand...
Click to collapse
ETA: 4 minutes
http://forum.xda-developers.com/showthread.php?t=2687496
There you go @[NUT] now make you magic bro =D Yay!!!!
Press thanks of I helped you
Sended from my Kitkat'fied C6906.
Sir, you're a god. I shouldn't have rushed with upgrading to 4.4... Tremendous job, quick as lightning. I will reroot tommorow. Thanks man!
Wysłane z mojego C6903 przy użyciu Tapatalka
After flashing this rom i can flash doomlords kernel with root for it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Flashtool 0.9.16 by @Androxyde
XZDualRecovery 2.7.90 BETA or newer.
Current rooted FW version: 10.4.1.B.0.101.
Special features:
SuperSU integrated in system, FULL ROOT!
XZDualRecovery 2.7.123 BETA (CWM & PhilZ Touch & TWRP) pre-installed;
init.d support (read how to enable)
For both locked and unlocked bootloaders!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
If you are unable to download torrent files directly, have http://zbigz.com/ do it for you!
How to update to 10.5.A.0.230:
Files (Find them on the DevDB Download tab!):
For C6502: Download C6502_10.5.A.0.230.flashable.zip (890MB) and C6502_10.5.A.0.230_Stripped.ftf (17MB)
For C6503: Download C6503_10.5.A.0.230.flashable.zip (902MB) and C6503_10.5.A.0.230_Stripped.ftf (17MB)
For C6506: Download C6506_10.5.A.0.230.flashable.zip (903MB) and C6506_10.5.A.0.230_Stripped.ftf (17MB)
Save them somewhere you remember;
Put 'C65XX_10.5.A.0.230.flashable.zip' on (the external) SDcard1;
Put 'C65XX_10.5.A.0.230_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in TWRP and don't forget to backup the contents of 'SDCard' (the internal storage!);
Flash 'C65XX_10.5.A.0.230.flashable.zip' in TWRP (if you notice your phone reboot during the update process, update to the latest XZDualRecovery and try again);
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C65XX_10.5.A.0.230_Stripped.ftf' using flashtool;
Reboot to system.
The first boot will be slow and after some time at the boot animation you will see Android start optimizing the apps on your phone.
Enjoy! :laugh:
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore any JB 4.2.2 FTF using any means you are familiar with so you can try again.
Root it using any means you are familiar with.
Install XZDualRecovery;
Update to 10.4.1.B.0.101;
Then try to update again using TWRP.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /sdcard1/XZDualRecovery, pack them up and send them to me or attach them to your bug report.
Thank you
XDA:DevDB Information
[STOCK][C650X][4.4] Update to 10.5.A.0.230 [Root & XZDR], ROM for the Sony Xperia ZL
Contributors
[NUT]
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Abandoned
Current Stable Version: 10.5.A.0.230
Stable Release Date: 2014-05-24
Created 2014-05-24
Last Updated 2014-08-20
awesome !!! downloading now .. thank you
ps. hope i didnt take ur post if u wanted to put more info
edit : availability 0 in torrent . :S
demonicangell™ said:
awesome !!! downloading now .. thank you
ps. hope i didnt take ur post if u wanted to put more info
Click to expand...
Click to collapse
no, you didn't
That's the beauty of the DevDB, it allows me to create 2 more posts just under the OP if I need them
demonicangell™ said:
awesome !!! downloading now .. thank you
ps. hope i didnt take ur post if u wanted to put more info
edit : availability 0 in torrent . :S
Click to expand...
Click to collapse
If you have a C6506 that's correct: I ran out of space ... created some and it will be online soon.
[NUT] said:
If you have a C6506 that's correct: I ran out of space ... created some and it will be online soon.
Click to expand...
Click to collapse
no trying to download 02 version ..
edit - same with 03 now ..
demonicangell™ said:
no trying to download 02 version ..
edit - same with 03 now ..
Click to expand...
Click to collapse
Well... then something is wrong at your end, as I am watching 7-10 people downloading both the 02 and 03 version.
06 version is now online.
[NUT] said:
Well... then something is wrong at your end, as I am watching 7-10 people downloading both the 02 and 03 version.
06 version is now online.
Click to expand...
Click to collapse
ok it started now dont know why it took so much time .. :good:
Ooww Great Work!
Thanks!
Sent from my C6503 using XDA Premium 4 mobile app
happy to report no lags in anything .. notification bar /settings or keyboard ..
flashed c6502 version .
Hi,
Can I go straight from 4.2.2 FW .67 rooted or do I need to update first to 4.3 FW .101 ?
I didn't try it yet, downloading files first.
It works with locked bootloader, right?
Thx!
Works fine as everytime. Thanks [NUT]!
---------- Post added at 05:18 PM ---------- Previous post was at 04:31 PM ----------
If you have issues writing to the external sdcard use this:
https://play.google.com/store/apps/details?id=nextapp.sdfix
Hi, I've got existenz ROM v5 installed. Can i install directly from that after doing a complete data/cache wipe?
fabioascoelho said:
Hi,
Can I go straight from 4.2.2 FW .67 rooted or do I need to update first to 4.3 FW .101 ?
I didn't try it yet, downloading files first.
It works with locked bootloader, right?
Thx!
Click to expand...
Click to collapse
It should work, but as I have no ZL to play with nor did I test it on anything else then 101 I'd say: create a solid backup and just go for it. In theory it should work between any stock rom based on 4.2.2 and up.
[NUT] said:
It should work, but as I have no ZL to play with nor did I test it on anything else then 101 I'd say: create a solid backup and just go for it. In theory it should work between any stock rom based on 4.2.2 and up.
Click to expand...
Click to collapse
I have the same configuration and it worked for me!
sid3091 said:
Hi, I've got existenz ROM v5 installed. Can i install directly from that after doing a complete data/cache wipe?
Click to expand...
Click to collapse
Me, too. Since Existenz 5 is .101 will it work? Would love to update on my upcoming nightshift!
detective zero said:
Me, too. Since Existenz 5 is .101 will it work? Would love to update on my upcoming nightshift!
Click to expand...
Click to collapse
yea i came from existenz v5 too . no issues
Once more we must thank @Nut a lot for making it possible to have the latest Xperia FW with root. Thanks very much. Still I have one question. On .569 and .101 though I installed the SuperSU fix, after installing rom, I still had problems using Foldermount with remount/reboot issue.
Then I solved it again applying your Remount/Reboot fix tool kit.
Could you please tell me if the issue hapens again with 4.4.2, I will be able to fix with the same tool?
Best regards.
demonicangell™ said:
yea i came from existenz v5 too . no issues
Click to expand...
Click to collapse
Did you do a full wipe or just update?
I don't get it to work. I'm always stuck on "formatting system" and screen flickers. Tried both updating and full wipe first... Any ideas?
detective zero said:
Did you do a full wipe or just update?
I don't get it to work. I'm always stuck on "formatting system" and screen flickers. Tried both updating and full wipe first... Any ideas?
Click to expand...
Click to collapse
Update xzdualrecovery to the latest version and try again, if it still fails...
I know this is going to sound odd but do it, for real:
Grab another external sdcard or use an USB otg device....
lclaudiogb said:
Once more we must thank @Nut a lot for making it possible to have the latest Xperia FW with root. Thanks very much. Still I have one question. On .569 and .101 though I installed the SuperSU fix, after installing rom, I still had problems using Foldermount with remount/reboot issue.
Then I solved it again applying your Remount/Reboot fix tool kit.
Could you please tell me if the issue hapens again with 4.4.2, I will be able to fix with the same tool?
Best regards.
Click to expand...
Click to collapse
Foldermount really needs to get fixed somehow because the reboot remount fix is fully integrated in xzdualrecovery... It's probably even better in xzdualrecovery then in the fix... Foldermount probably does something which just sets all alarms off in the rom or screws about with something zygote goes mad about...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Flashtool 0.9.16 by @Androxyde
XZDualRecovery 2.7.124 BETA or newer.
Current rooted FW version: 14.3.A.0.757.
Special features:
SuperSU integrated in system, FULL ROOT!
XZDualRecovery 2.7.132 BETA (CWM & PhilZ Touch & TWRP) pre-installed;
init.d support (read how to enable)
For both locked and unlocked bootloaders!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
How to update to 14.4.A.0.108:
Files (Find them on the download tab!) :
For C6902: Download C6902_14.4.A.0.108.flashable.zip (1022MB) and C6902_14.4.A.0.108_Stripped.ftf (21MB)
For C6903: Download C6903_14.4.A.0.108.flashable.zip (947MB) and C6903_14.4.A.0.108_Stripped.ftf (21MB)
For C6906: Download C6906_14.4.A.0.108.flashable.zip (970MB) and C6906_14.4.A.0.108_Stripped.ftf (21MB)
For C6943: Download C6943_14.4.A.0.108.flashable.zip (1003MB) and C6943_14.4.A.0.108_Stripped.ftf (21MB)
Save them somewhere you remember;
Put 'C69XX_14.4.A.0.108.flashable.zip' on (the external) SDcard1;
Put 'C69XX_14.4.A.0.108_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in TWRP and don't forget to backup the contents of 'SDCard' (the internal storage!);
Flash 'C69XX_14.4.A.0.108.flashable.zip' in TWRP (if you notice your phone reboot during the update process, update to the latest XZDualRecovery and try again);
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C69XX_14.4.A.0.108_Stripped.ftf' using flashtool;
Reboot to system.
The first boot will be slow and after some time at the boot animation you will see Android start optimizing the apps on your phone.
Enjoy! :laugh:
@RHBH has created a deodex package for each of these releases. Check out his thread here.
Need some help?
@shem2409 has made a video guide to aid you in the update process:
Thanks buddy, great work, as always!
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore any KitKat FTF using any means you are familiar with so you can try again.
Root it using the Easy Root Tool by @zxz0O0 and install XZDualRecovery, or
Install XZDualRecovery using option 3 in the installer menu (installation on unrooted ROM)
Then try to update again using TWRP.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /sdcard1/XZDualRecovery, pack them up and send them to me or attach them to your bug report.
Thank you
XDA:DevDB Information
[STOCK][C69XX][4.4.4] Update to 14.4.A.0.108 [Root & XZDR][DE-/ODEX], ROM for the Sony Xperia Z1
Contributors
[NUT]
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 14.3.A.0.757
Based On: STOCK
Version Information
Status: Stable
Stable Release Date: 2014-07-01
Created 2014-07-02
Last Updated 2014-08-19
ROM status: Stable
File links updated and working now.
Have fun people, sorry for the wait
Great speed as usual. Was looking forward to this one
Go have a beer mate. You deserved it.
and C6903_14.4.A.0.108_Stripped.ftf (21MB)
Click to expand...
Click to collapse
... still linked to C6903_14.3.A.0.757_Stripped.ftf
Code:
http://nut.xperia-files.com/download.php?dlid=QzY5MDNfMTQuMy5BLjAuNzU3X1N0cmlwcGVkLmZ0Zg==
NerdiX said:
... still linked to C6903_14.3.A.0.757_Stripped.ftf
Code:
http://nut.xperia-files.com/download.php?dlid=QzY5MDNfMTQuMy5BLjAuNzU3X1N0cmlwcGVkLmZ0Zg==
Click to expand...
Click to collapse
whoops
Thanks, fixed it now :angel:
Quality.
YESSSS!!!!!
Perfect!! Thanks a lot!!!!
It replaces perfectly rooted .761 (C6903), too
Tested by myself using dualrecovery 2.7.132 BETA
I used last Flashtool 0.9.16.1
It's a really good firmware version
I can't find something I don't like this time
Thank you again Nut
Inviato dal mio C6903 con Tapatalk
guybrush2099 said:
It replaces perfectly rooted .761 (C6903), too
Tested by myself using dualrecovery 2.7.132 BETA
I used last Flashtool 0.9.16.1
It's a really good firmware version
I can't find something I don't like this time
Thank you again Nut
Inviato dal mio C6903 con Tapatalk
Click to expand...
Click to collapse
It will probably work when coming from any JB or KitKat version, but I tend to keep it a safe bet on the OP
So where is this firmware based? I mean, the countrry, like FR AE and such? Also, if i already have rooted .108 (4.4.4) on my z1 C6903, can i just flash the zip file in twrp and not the ftf anymore? Also, can i dirty flash it?
mahalkosijoy said:
So where is this firmware based? I mean, the countrry, like FR AE and such? Also, if i already have rooted .108 (4.4.4) on my z1 C6903, can i just flash the zip file in twrp and not the ftf anymore? Also, can i dirty flash it?
Click to expand...
Click to collapse
IF you're on 108 already, why bother?
The 03 version is based on the French release. 02 is India, 06 is US and 43 is Brazil.
[NUT] said:
IF you're on 108 already, why bother?
The 03 version is based on the French release. 02 is India, 06 is US and 43 is Brazil.
Click to expand...
Click to collapse
oh, so i have the same version. just in case. :laugh: thanks for the reply man.
Thanks!
Any problem using French based fw on a nordic(Norwegian) c6903?
X-Reality engine don't work in my C6902 UB with Advanced Stock Kernel latest version!!! ???
snurre said:
Thanks!
Any problem using French based fw on a nordic(Norwegian) c6903?
Click to expand...
Click to collapse
Nope.
Christian Fleming said:
X-Reality engine don't work in my C6902 UB with Advanced Stock Kernel latest version!!! ???
Click to expand...
Click to collapse
me by PM said:
I'm on unlocked bootloader, so I'm not in position to test it...
You could try to create a backup of your data partition and then do a factory reset from TWRP. This will not mess with your internal storage if you don't want it to.
Then see if it turns on again. Could be something changed in how it gets addressed in the config...
Click to expand...
Click to collapse
But seeing you have an unlocked bootloader as well... X-Reality should not even work anymore ever since you unlocked it...
Could someone please post the file called libmmcamera_tintless_algo.so?
[NUT] said:
Nope.
But seeing you have an unlocked bootloader as well... X-Reality should not even work anymore ever since you unlocked it...
Click to expand...
Click to collapse
Yeah but it worked in 4.4.2 and after flashing 4.4.4 it stopped working, and factory data rest didn't work.
Christian Fleming said:
Yeah but it worked in 4.4.2 and after flashing 4.4.4 it stopped working, and factory data rest didn't work.
Click to expand...
Click to collapse
Well... sorry bro: you have to either relock the bootloader or live without X-Reality ... its a placebo anyway.
Christian Fleming said:
Yeah but it worked in 4.4.2 and after flashing 4.4.4 it stopped working, and factory data rest didn't work.
Click to expand...
Click to collapse
woop. I guess I won't update for now!
Is there SdCard read&write issue on this firmware too mate? I meant, do we have to edit permission.xml file again after flashing this? I am currently not able to move apps to sd nor i can use third part backup&restore apps like " GOBACKUP" with 4.4.2 , but with the 532 stock kernel i can do it. Issue is still there on the firmware 14.3.A.0.757 stripped by NUT I need your help man. I used everything on XDA, no hope.