dear paranoid android users and developers,
I've made a fresh (and clean) install of newest BETA 4 on my Nexus 5 and Nexus 7 2013 (Wi-Fi) and encountered a small problem... I cannot seem to get StickMount to work... none of my pendrives that worked on previous versions (the ones before SuperSU was switched to Superuser) seem to show up in any file explorers...
also, when I ran the USB Host Diagnostics, I got a result in the Root API section: N/A... therefore, I'm thinking something is not right on the Superuser side...
I would be oh so thankful if someone could help with coming up with a solution! :fingers-crossed:
P.S. I'm posting a screenshot of the USB Host Diagnostics as attachment. the same result shows up on Nexus 5.
try USB OTG Helper
I don't know if it will work but its what I used when I was on a different ROM, I'll check later and see if it still works.
hmm, will look into it and see if anything changes...
LittleJakub said:
hmm, will look into it and see if anything changes...
Click to expand...
Click to collapse
I just tested it. OTG works Perfectly on PA beta 4. If you are using an external HDD make sure its getting powered.
tjhooker73 said:
I just tested it. OTG works Perfectly on PA beta 4. If you are using an external HDD make sure its getting powered.
Click to expand...
Click to collapse
On which device did You manage to do it? And with help of 3rd party apps, or just with the system in its own?
Also... Stock kernel or custom one?
Cheers!
Htc one x. Custom kernel but the kernel doesn't do anything for otg. And only used USB OtG Helper. Just plug the OTG cable and the USB device in and then open otg helper then plug the otg cable into the phone and wait a few seconds and then mount.
Sent from my iPad using Tapatalk
on GNexus, with PA Beta4, stock kernel: it works from the start, without 3-party apps.
the only thing it doesn't work is when I unmount (from "settings>storage": is there any other way to do it?) it keeps a permanent notification saying "Removed USB storage. Insert new media" that won't go away. Eventually it does, don't know how, why and when.
cheers
Nexus 5, PA Beta 4, stock kernel.
OTG works flawlessy, from the settings I can mount and unmount it.
Related
Hello there...
I've seen some previous posts about this issue...both on all they were able to get either some recognition of OTG or an app to address it.
My problem is....
Sammy galaxy tab 10.1 wifi
Cm9 7/2/12
OEM OTG adaptor
In no way is it seen or recognized by my tab. I've tried all the apps like stickusb etc.. I can't get anything to work. All cards ( tried sd, microsd, & cf ) are formatted to fat32, to no avail. No USB recognition, tried Mouse's, keyboards, game pads..etc.
I have also tried wiping and using Kangs build 40. I have not tried stock.
Any ideas??:crying:
SgtMacabre said:
Hello there...
I've seen some previous posts about this issue...both on all they were able to get either some recognition of OTG or an app to address it.
My problem is....
Sammy galaxy tab 10.1 wifi
Cm9 7/2/12
OEM OTG adaptor
In no way is it seen or recognized by my tab. I've tried all the apps like stickusb etc.. I can't get anything to work. All cards ( tried sd, microsd, & cf ) are formatted to fat32, to no avail. No USB recognition, tried Mouse's, keyboards, game pads..etc.
I have also tried wiping and using Kangs build 40. I have not tried stock.
Any ideas??:crying:
Click to expand...
Click to collapse
well google didn't give me an answer so maybe you should try to go back on stock? ics should be released next month.
Try this for the OTG.
nighthawk696969 said:
Try this for the OTG.
Click to expand...
Click to collapse
OK i haven't seen that one... thanks ill test it tomorrow....don't have the TAB with me today... ill let you know how it went tomorrow.....
I have no problem using OTG with CM9. I just ran out of the box. It wouldn't really show me any icons etc. but I always could access the mounted USB drive with the Terminal app.
As far as gamepads are concerned: I had to enable the kernel modules xpad and ff-memless-something with insmod. Than it would recognize the Xbox 360 controller just fine.
Sorry if this was answered before, I couldn't find an appropriate thread for that.
So I installed latest OrDroid 2.7.5, everything went smoothly and works fine for now.
But I have issues trying to connect the phone to my PC and access internal storage.
Once I connect the USB cable I get the usual "USB Connected - Tap to change settings". Once I press it I get the "Portable hotspot & tethering" instead of the window where I choose charge/USB only.
In My Computer it appears as Digital Camera "HTC One X", but not as Removable drive as it was before.
Any ideas how to access the storage again?
Thanks in advance
This is not specific for ordroid but
Check under
Settings
Storage
Usb computer connection ( in three dotmenu or context menu)
It should be mtp or mass storage.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
eyosen said:
This is not specific for ordroid but
Check under
Settings
Storage
Usb computer connection ( in three dotmenu or context menu)
It should be mtp or mass storage.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
Thanks, but that is also a problem. I cannot find the Usb computer connection settings anywhere under the Storage. There's no 3dotmenu or context menu available either.
Found the answer to my question in one of the ROMs thread. Can be closed.
Care to repeat it here?
sure but it didn't really solve the problem, just helped me understood what's the reason for that
http://forum.xda-developers.com/showthread.php?t=1836919&highlight=usb+connection+settings&page=135
scroll down for post from user jackolus and see the next reply.
will have to try on my other PC with Win7 to see if it works.
Another option - go to Recovery and connect your phone to PC. This way it appears in My Computer as HTC Storage. Not the most convenient method, but still better than nothing.
any one know of any fix for this yet? i'm on mac and cannot mount sd card other than going into recovery. pain in the ass, every time i plug it in to my dock htc sync link pops up, tried installing it it but it's ****e, still doesnt allow direct access to sd.
If its not installed it pops up as a link, if it is installed it pops up the app. pain if i only want charge.
Really annoys me when they remove common used features.
Someone at HTC must have sat and had a thought, yes they have 32gb non removable sd card but it's highly unlikely they ever want access to it, lets take the option away.
There's no 'fix' as HTC has changed the storage from USB MS for MTP - unless they change it back there's not a lot you can do
EDIT: This might help...
http://forum.xda-developers.com/showthread.php?t=1355913
Thanks, may have to revert to ics then, this is a big flaw for me, do a lot of transferring files to and from sd, cant be ****ed with entering recovery everytime.
Out of curuosity, would it be the same on AOSP jelly bean roms?
Guess i could try BT transfers
shangostar said:
Out of curuosity, would it be the same on AOSP jelly bean roms?
Guess i could try BT transfers
Click to expand...
Click to collapse
I've tried, and used, many JB ROMs and never has a problem connecting my phone to a computer over a usb cable
sent via a Slim Jelly Bean
liquidguru said:
I've tried, and used, many JB ROMs and never has a problem connecting my phone to a computer over a usb cable
sent via a Slim Jelly Bean
Click to expand...
Click to collapse
On a Mac?
shangostar said:
On a Mac?
Click to expand...
Click to collapse
Ahhhhh, you're right...I'm a pc. Sorry, can't help
sent via a Slim Jelly Bean
Bogega said:
Sorry if this was answered before, I couldn't find an appropriate thread for that.
So I installed latest OrDroid 2.7.5, everything went smoothly and works fine for now.
But I have issues trying to connect the phone to my PC and access internal storage.
Once I connect the USB cable I get the usual "USB Connected - Tap to change settings". Once I press it I get the "Portable hotspot & tethering" instead of the window where I choose charge/USB only.
In My Computer it appears as Digital Camera "HTC One X", but not as Removable drive as it was before.
Any ideas how to access the storage again?
Thanks in advance
Click to expand...
Click to collapse
you can't mount sd card while using the phone unfortunately... you need to mount it from recovery
Hello,
I cannot get my USB Host Mode to work on my Note II... I have tried various ROM's/Kernel combo's, and the apps you can get in the play store. (USB Host Controller). I've also tried lots of devices, and provided the external power when it was needed. When I got this phone I wanted the stock ROM of it, and didn't even try the USB Host mode. All the ROM I've tested have been stock based, that shouldn't be the issue.
I know the USB-OTG adapter works because I've tried it on other phones, with the same devices I can't get to work on my own phone.
My Rom is CleanROM Ace 4.9, which is latest. Kernel is SaberKernel_23, also latest.
Anyone have any suggestions?
Thanks
Maniac
Not much experience with it but I use 'stickmount' and can see USB storage with my dongle.
I'm with Telus and also using cleanrom 4.9 the below app worked for me
https://play.google.com/store/apps/details?id=com.mohammadag.samsungusbmassstorageenabler
kingofkings11 said:
I'm with Telus and also using cleanrom 4.9 the below app worked for me
https://play.google.com/store/apps/details?id=com.mohammadag.samsungusbmassstorageenabler
Click to expand...
Click to collapse
I just found this app yesterday, but, this is not the usb I'm looking for. This app allows you to mount the extsd as a USB device on pc. I want to use USB devices with my phone. Mount flash drives, mouse, xbox 360 controller, etc..
Maniac
MrManiacNF said:
I just found this app yesterday, but, this is not the usb I'm looking for. This app allows you to mount the extsd as a USB device on pc. I want to use USB devices with my phone. Mount flash drives, mouse, xbox 360 controller, etc..
Maniac
Click to expand...
Click to collapse
What kernel are you running? USB-OTG functionality must be enabled in the kernel. I'm running Adam.Kernel v2.5 (for N7105/I317) and when I connect my flash drive to phone (via USB-OTG cable) you should see two messages in the top notification area: "USB connector connected" then "USB mass storage connected". Then open your favorite file manager and you should see another storage device "UsbDriveA" (the other two of course are "sdcard0" (internal) and "extSdCard" (external). When you click on "UsbDriveA" you should see the files on your flash drive. Two things to check: does your kernel support USB-OTG? (I'm pretty sure when I was on the CleanROM v4.9 (N7105XXDMC3) kernel, it also worked. Second thing to check is the cable... I see you mentioned it works on other devices, but I had same problem. Bought another USB-OTG approved cable (less than 6 bucks) and it worked flawlessly on the Note2.
By the way, there is a bug in the 4.1.2 firmware when you disconnect the cable from phone (even using the drop down notification and selecting "USB mass storage.. Select to remove...." your phone won't deep-sleep again unless you reboot (leaves a partial wakelock called "USB Unmounter" (something like that). However, when ready to disconnect cable, do it this way "Menu--> System Settings --> Storage --> and scroll down to "USB OTG storage"... then select "Unmount USB OTG storage". This will safely unmount usb cable storage and allow phone to deep-sleep again without rebooting. Hope this helps.
DoctorQMM said:
Second thing to check is the cable... I see you mentioned it works on other devices, but I had same problem. Bought another USB-OTG approved cable (less than 6 bucks) and it worked flawlessly on the Note2.
Click to expand...
Click to collapse
Same here.
Sent from my SGH-I317M using xda premium
Got it working. It was my USB OTG Cable... Got a new one, now its perfect...
Thanks to all that replied
-Maniac
Hi,
I've just bought a GPad 8.3 and i'd like to transfer photos i make with my Canon 40D, directly or through a card reader on the tablet (Canon use only Compact Flash cards) : do you guys know a way to do it ?? I've searched but with no solution for now...
Thx in advance for your precious help !
21vm said:
Hi,
I've just bought a GPad 8.3 and i'd like to transfer photos i make with my Canon 40D, directly or through a card reader on the tablet (Canon use only Compact Flash cards) : do you guys know a way to do it ?? I've searched but with no solution for now...
Thx in advance for your precious help !
Click to expand...
Click to collapse
Get a generic Android OTG cable (very cheap from eBay). Use it to connect directly to your camera. If that doesn't work, for some reason, use the OTG cable with an adapter that will allow a Compact Flash card to plug into a USB port.
ok, thank you, i'll try this :good:
21vm said:
ok, thank you, i'll try this :good:
Click to expand...
Click to collapse
If you have't used an OTG cable before, here's how it will work. When you plug in the camera or a compact flash card adapter, the files will appear under /storage/USBstorage (or USBstorage2 , 3, etc.). At that point, you can copy files to or from the connected device using any file manager app.
woody1 said:
If you have't used an OTG cable before, here's how it will work. When you plug in the camera or a compact flash card adapter, the files will appear under /storage/USBstorage (or USBstorage2 , 3, etc.). At that point, you can copy files to or from the connected device using any file manager app.
Click to expand...
Click to collapse
Thanks a lot for your help, i'll try this asap.
woody1 said:
If you have't used an OTG cable before, here's how it will work. When you plug in the camera or a compact flash card adapter, the files will appear under /storage/USBstorage (or USBstorage2 , 3, etc.). At that point, you can copy files to or from the connected device using any file manager app.
Click to expand...
Click to collapse
Thanks for this too! Never used OTG and I'm planning to do so for the sam reasons. You saved me a search
Do you need to be rooted to do this? I have the GPe and when I connect a flash drive with my OTG cable it doesn't read at all. Even checked in my for manager and it doesn't pop up.
Sent from my LG-V510 using xda app-developers app
black n white said:
Do you need to be rooted to do this? I have the GPe and when I connect a flash drive with my OTG cable it doesn't read at all. Even checked in my for manager and it doesn't pop up.
Sent from my LG-V510 using xda app-developers app
Click to expand...
Click to collapse
OTG doesn't work on a GPE. You'll need an app to make it work.
woody1 said:
OTG doesn't work on a GPE. You'll need an app to make it work.
Click to expand...
Click to collapse
Any idea which app will work with a OTG Card Reader? I have managed to get an OTG cable and USB stick to work with Total Commander USB app, but doesn't work with the card reader. Thanks
Sam
sam61n2 said:
Any idea which app will work with a OTG Card Reader? I have managed to get an OTG cable and USB stick to work with Total Commander USB app, but doesn't work with the card reader. Thanks
Sam
Click to expand...
Click to collapse
I used nexus media importer on my old Nexus 7 and seems to work fine on my LG Gpad GPE.
Sent from my Nexus 5 using Tapatalk
I have an LG g4 rooted running genesis 3.6 room and LG g4 stock rooted kernel.
Recently I have noticed that when using a USB otg lead and flash drive, it appears under storage on the settings menu but doesn't appear in any file manager. Can anyone help please.
i have the same issue on stock 6.0 rom.
rhjw2011 said:
I have an LG g4 rooted running genesis 3.6 room and LG g4 stock rooted kernel.
Recently I have noticed that when using a USB otg lead and flash drive, it appears under storage on the settings menu but doesn't appear in any file manager. Can anyone help please.
Click to expand...
Click to collapse
In your file manager. Go to system then storage. You can find your flash drive there. Or use Solid Explorer which shows the flash drive but you have to give permission the first time.
I tried that too. It does show up in Settings>Storage. It doesn't show up in any file manager.
rhjw2011 said:
I tried that too. It does show up in Settings>Storage. It doesn't show up in any file manager.
Click to expand...
Click to collapse
Use solid explorer. It will allow you to see it
Sent from my LG-H815 using XDA Free mobile app
As said Solid Explorer works just fine indeed :good:
on stock rooted canadian variant, showes up perfectly fine. maybe its the rom
I've tried that too. Still no joy. Could be the rom.
Hi
The OTG functionality was working fine until the upgrade to 6.0.
After upgrade stopped working. No able to connect keyboard/mouse or SD/USB via OTG.
I have openned a ticket to LG support and still waiting for feedback.
Regards
I had nothing but good come from otg keyboards ps3 control harddrives with ext power. Everything even a old logitech microsoft flight sim joystick. On mm u do have to grant perms. Lollipop also try shutting of usb debugging sometime that interferes