It says in 30 min but while I was downloading some games it just stayed on is that right.
Sent from my Nexus 7 using xda app-developers app
darchur said:
It says in 30 min but while I was downloading some games it just stayed on is that right.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
You can set the screen saver time in settings I have mine at 15 minutes. But after 30 minutes of inactivity it will shutdown. it's really just a deeper sleep then a full power off.
I set my screen saver to 15 minutes (or whatever the lowest is) and then it turns off 30 minutes after screen saver pops up.
It wont turn off if you are in a sideloaded app though like cable tv or xbmc so I always make sure to just hit the home button when I am done using it so it turns off.
Does it turn of if your downloading an app.
Sent from my Nexus 7 using xda app-developers app
nba1341 said:
I set my screen saver to 15 minutes (or whatever the lowest is) and then it turns off 30 minutes after screen saver pops up.
It wont turn off if you are in a sideloaded app though like cable tv or xbmc so I always make sure to just hit the home button when I am done using it so it turns off.
Click to expand...
Click to collapse
This is bad news for me, I want to buy fire TV mostly for XBMC, I use it at night and will just have some TV shows play, I set a sleep timer on my TV to shut off automatically, the Original XBOX i'm currently using has option to shut down after x amount of idle time inside XBMC. Does anyone know of a way to make XBMC app close after certain time frame has passed? I wouldnt want the fire TV to be on/not sleeping ever 24/7
Have you experienced with sleep option on xbmc I have not tried it yet with the Fire TV. Not sure if it just exits xbmc when it reaches 0?
Another option would be to see if SleepTimer can be sideloaded on Fire TV. Not sure if this would work on the Fire TV but you could set to exit your "music" app after a certain amount of time and just set XBMC as the music app.
I'm having an issue that I haven't sorted out yet where it won't seem to sleep even on the default home screen when I have my USB XBox 360 controller plugged in. This happened before I sideloaded antyhing too, and I thought it might be of some help if there was any USB device that may be preventing sleep for someone here too.
would it be possible to do a real shutdown with root?
Pressing Fn+Esc on my Logitech K400 puts it to sleep immediately.
lolwatpear said:
would it be possible to do a real shutdown with root?
Click to expand...
Click to collapse
I've been able to do a reboot over adb but I'm not sure if there is a shutdown command. With root I'd assume we'll be able to shutdown pretty easily.
sadboyzz said:
Pressing Fn+Esc on my Logitech K400 puts it to sleep immediately.
Click to expand...
Click to collapse
That's awesome news! I'll try it on my wireless keyboard too and report back (if I remember to )
not sure if everyone knows but, holding Play/Pause and middle select button for 5 seconds, turns it off.
YoColdRain said:
not sure if everyone knows but, holding Play/Pause and middle select button for 5 seconds, turns it off.
Click to expand...
Click to collapse
You sure? Mine just restarts.
I don't think it ever turns off completely. The light will go out, but if it was 100% off you would have to unplug it and plug it back in to get the control to work. There is no off switch.
Mine restarts as well. Only way I have found to turn it off is to unplug it.
Mine turn off with the combo yocoldrain mentioned, it shows a message of turning off. Thanks
2fastkuztoms said:
Mine turn off with the combo yocoldrain mentioned, it shows a message of turning off. Thanks
Click to expand...
Click to collapse
What software version do you have.... as version 51.1.0.1 say shuting down but then actually reboots.
Don't be concerned with the fire TV staying on when not in use, your tv uses more in standby power mode than the fire tv uses in full power mode.
The box is made very well, all that weight comes from cast aluminum, the whole case is one big heat sink.
before and after new firmware, box still turns off on my side. well it says powering off, then amazon logo comes on as in its restarting or something, but actually turns off.
Hours later, I can still see it polling for the remote's battery state. It never really turns off. That's probably for the best, user experience wise. You wouldn't want to click the remote and have absolutely nothing happen.
Skater4599 said:
This is bad news for me, I want to buy fire TV mostly for XBMC, I use it at night and will just have some TV shows play, I set a sleep timer on my TV to shut off automatically, the Original XBOX i'm currently using has option to shut down after x amount of idle time inside XBMC. Does anyone know of a way to make XBMC app close after certain time frame has passed? I wouldnt want the fire TV to be on/not sleeping ever 24/7
Click to expand...
Click to collapse
yes, get elmerohueso screensaver, he nicely enough updated it so even if you left xbmc paused, it will stop the video, and initiate suspend. my firetv is always sleeping now
Related
Everytime im done with my Ouya, I go to the main screen press Y and choose "turn off ouya". I know that the ouya shuts down because the input on my tv goes blank and says that no source have been found. Now when I try to turn on my ouya,lets say about 1.5 hours later my ouya is already turned on and is asking me to shut down.
Why is this happening to me? Am I not shutting down correctly?why does the ouya turn itself on?
Sent from my LG-LS970 using Tapatalk 4
EFEXR said:
Everytime im done with my Ouya, I go to the main screen press Y and choose "turn off ouya". I know that the ouya shuts down because the input on my tv goes blank and says that no source have been found. Now when I try to turn on my ouya,lets say about 1.5 hours later my ouya is already turned on and is asking me to shut down.
Why is this happening to me? Am I not shutting down correctly?why does the ouya turn itself on?
Sent from my LG-LS970 using Tapatalk 4
Click to expand...
Click to collapse
Wish I could answer, but at least I'm glad to know I'm not the only one running into this issue. I'll do the exact same thing to shut down, and notice my TV's input still shows active, I'll switch back, and it's asking to shut down Ouya / Controller / Cancel. I'll do the shutdown again, and then wait for it to show No Signal on my monitor. I hope this will be also be addressed by a future update...
When you shut off with the menu options ouya is actually going to a low power sleep mode instead of turning off - similar to a android tablet or phone when you just push the power button or close a case cover, the next time you push it it is an instant on instead of a boot process.
Apparently it failing to stay asleep has something to do with the HDMI interface, though I can't technically confirm or deny this I do know it's entirely possible.
The only way I've found to actually shut it off is to either hold the power button for a few seconds until it shuts off, or pull the power plug (not recommended.)
Or root, install QuickReboot and shutdown with it...
Envoyé depuis mon Galaxy Nexus avec Tapatalk 4
I am facing the same issue. I did changed the HDMI cable with some other one. this is weird:cyclops:
joeblowma said:
The only way I've found to actually shut it off is to either hold the power button for a few seconds until it shuts off, or pull the power plug (not recommended.)
Click to expand...
Click to collapse
This actually works. Thank you.
Hdmi activity wakes up OUYA, many TV's scan inputs so they don't list them in "source" menu and this turns OUYA back on. A poorly thought out feature.
Rather than doing a hard shut down, you can do a full shut down by holding the power button for a full second or two. You will then get an on screen prompt to confirm shut down, this will do a full shut down not just put it to sleep like it does when you use the controller to initiate it. Constantly killing power to a running system will probably start corrupting files at some point.
There is also some sort of sleep or screen or keep awake option in advanced settings that is supposed to disable the hdmi wake up.
Sent from my SCH-I535 using Tapatalk 4
Hello everyone. I am new to the rooting community so i am not sure if this is possible or what, let me explain. I own a Kindle Fire first gen with android 4.2.2. Its rooted now with CyanogenMod 10.1.3-otter. My plan is to use the kindle for the head unit for my car instead of a cd deck.
EDIT: (well i cant post a picture of my project because i dont have 11 posts)
So what i need now is a way to power on the device without using the button, like a double tap on the screen to wake it up. Any info on how i could do this would be helpful, even if its not possible. Any other suggestions would be nice as well
Well knock On is a kernel-reliant feature. You will need a ROM or kernel that supports it (none that I know of for the Kindle Fire exist). You could keep the Kindle connected to USB power and enable the option in Settings->Developer Settings->Stay Awake to consistently keep the screen on. Otherwise I would suggest something to make the power button easier to press (perhaps a lever of some kind). Disabling the lockscreen is also a good idea for this kind of project (go to Settings->Security->Lockscreen->None). I'm drawing a blank otherwise because I always use my Kindle as a normal tablet.
Sent from my ceiling fan using XDA Übermensch -5
yattaro said:
Well knock On is a kernel-reliant feature. You will need a ROM or kernel that supports it (none that I know of for the Kindle Fire exist). You could keep the Kindle connected to USB power and enable the option in Settings->Developer Settings->Stay Awake to consistently keep the screen on. Otherwise I would suggest something to make the power button easier to press (perhaps a lever of some kind). Disabling the lockscreen is also a good idea for this kind of project (go to Settings->Security->Lockscreen->None). I'm drawing a blank otherwise because I always use my Kindle as a normal tablet.
Sent from my ceiling fan using XDA Übermensch -5
Click to expand...
Click to collapse
I already have the lock screen off, not having the display turn off is really all i need so this helps a lot. The screen turns on when i start the car because of the charge then stays on. now i am using an app to shut off the screen. thanks tho, im just going to stop looking for knock on lol
I used to turn off power for any unused devices, even it takes only few watt. There is no menu to shutdown and turn off fire TV before I cut its power. I'm wondering whether it is safe to cut its power at any time. Or it's not necessary to have a menu selection to shutdown system? Thanks.
..
billsam38 said:
I used to turn off power for any unused devices, even it takes only few watt. There is no menu to shutdown and turn off fire TV before I cut its power. I'm wondering whether it is safe to cut its power at any time. Or it's not necessary to have a menu selection to shutdown system? Thanks.
Click to expand...
Click to collapse
It should be safe to just unplug, but if you use it often eventually it could cause a problem either in the firmware or the the connection itself. A simple solution would be something like a Woods wireless remote outlet. The one I have comes with 3 plugs and a remote with a switch for each. The plug can take a bit of room on the surge protector but so does the FTV power cord. I just press and hold the select and play buttons on the FTV remote for about 5 seconds and when the screen goes black I hit the power button for the outlet.
billsam38 said:
I used to turn off power for any unused devices, even it takes only few watt. There is no menu to shutdown and turn off fire TV before I cut its power. I'm wondering whether it is safe to cut its power at any time. Or it's not necessary to have a menu selection to shutdown system? Thanks.
Click to expand...
Click to collapse
Get a Microsoft remote (MCE Remote). The power button on the MCE remote will put the firetv back to sleep. When you hit the power button again it turns back on, or hitting any button on the firetv remote.
I actually prefer the MCE remote because it offers more function when using XBMC and VIMU. I can actually time skip vs ffwd, hit stop, etc... Only complaint is there is no home button. The microsuck button does not take me home, and I have not figured out how to program it on the MCE remote.
mattngsx said:
Get a Microsoft remote (MCE Remote). The power button on the MCE remote will put the firetv back to sleep. When you hit the power button again it turns back on, or hitting any button on the firetv remote.
I actually prefer the MCE remote because it offers more function when using XBMC and VIMU. I can actually time skip vs ffwd, hit stop, etc... Only complaint is there is no home button. The microsuck button does not take me home, and I have not figured out how to program it on the MCE remote.
Click to expand...
Click to collapse
As i've stated in another thread, "sleep" on this is pretty much the same as sleep on a regular android device. It's still fully awake, although the CPU might be downclocked a little.
As for home, you need F12 to get home.
rbox said:
As i've stated in another thread, "sleep" on this is pretty much the same as sleep on a regular android device. It's still fully awake, although the CPU might be downclocked a little.
As for home, you need F12 to get home.
Click to expand...
Click to collapse
I love low watt setups, so I know the mind set for the OP. It would have been nice to be able power off the device! I was told that lab126 felt the footprint was small enough in standby that it wasn't needed. They also wanted to be able to update when not in use, etc...
You could hook it up the ftv to a power strip. I've seen power strips that have one active outlet and shuts off the rest of the outlets when the primary device is not used. That could be another option?
Rbox- Do you know where the MCE remote values are stored in the FIreTV. I want to see if I can modify so the windows button is f12.
mattngsx said:
Rbox- Do you know where the MCE remote values are stored in the FIreTV. I want to see if I can modify so the windows button is f12.
Click to expand...
Click to collapse
Since it shows up as a regular HID keyboard I don't think it has a keylayout file. What I do know, is that the kernel could probably do it. The HID layer has a quirks system that allows you do to funky stuff for individual HID devices. Do you know the usb vendor and device id for the remote? I can take a look at the quirks stuff tonight and see if we can do anything. It might have to wait until custom kernels can be loaded though.
rbox said:
Since it shows up as a regular HID keyboard I don't think it has a keylayout file. What I do know, is that the kernel could probably do it. The HID layer has a quirks system that allows you do to funky stuff for individual HID devices. Do you know the usb vendor and device id for the remote? I can take a look at the quirks stuff tonight and see if we can do anything. It might have to wait until custom kernels can be loaded though.
Click to expand...
Click to collapse
I'm at work but I can pull the HID/Device info when i get home tonight. I will PM you the info, so we're not clogging the OP's thread.
It takes 3 to 4 watts to stream a movie - measured on a Kill a Watt meter. I forgot what the reading was on sleep mode but its not much. The max watts I've seen was 5 watts and that's while installing an app.
mattngsx said:
Get a Microsoft remote (MCE Remote). The power button on the MCE remote will put the firetv back to sleep. When you hit the power button again it turns back on, or hitting any button on the firetv remote.
I actually prefer the MCE remote because it offers more function when using XBMC and VIMU. I can actually time skip vs ffwd, hit stop, etc... Only complaint is there is no home button. The microsuck button does not take me home, and I have not figured out how to program it on the MCE remote.
Click to expand...
Click to collapse
Which MCE remote do you use? I have one from philips but it doesnt work with my ftv.
Enviado de meu GT-N7100 usando Tapatalk
KillerJoeBR said:
Which MCE remote do you use? I have one from philips but it doesnt work with my ftv.
Enviado de meu GT-N7100 usando Tapatalk
Click to expand...
Click to collapse
What gen is it? I heard old mce receivers don't work? My USB receiver is a Phillips/nxp. It came with my zotac mini pc.
I just got my fire TV, rooted and installed a few apps including the firedtv.
I left it over night and realized it never went into sleep (the front led was on). I was able to put into sleep using a keyboard, but I don't want to keep the keyboard near my fire tv all the time.
Do you guys know what is wrong?
minmao said:
I just got my fire TV, rooted and installed a few apps including the firedtv.
I left it over night and realized it never went into sleep (the front led was on). I was able to put into sleep using a keyboard, but I don't want to keep the keyboard near my fire tv all the time.
Do you guys know what is wrong?
Click to expand...
Click to collapse
Try rebooting your box and without loading any external apps, see if it goes to sleep after a certain time. My guest is that an app is still running in the background preventing sleep mode.
When I first installed XBMC that happened too. I found out that XBMC was still running in the background because I didn't properly exit the app. Clicking the home button on the remote just leaves XBMC running in the background. Exit by pressing XBMC power off button and setting the system power saving timer to shut down at a interval during idle works.
ETFoneHome said:
Try rebooting your box and without loading any external apps, see if it goes to sleep after a certain time. My guest is that an app is still running in the background preventing sleep mode.
When I first installed XBMC that happened too. I found out that XBMC was still running in the background because I didn't properly exit the app. Clicking the home button on the remote just leaves XBMC running in the background. Exit by pressing XBMC power off button and setting the system power saving timer to shut down at a interval during idle works.
Click to expand...
Click to collapse
You can also set the power off setting in xbmc to exit after some idle time value.
Sent from my Nexus 5 using XDA Free mobile app
Shinyhead said:
You can also set the power off setting in xbmc to exit after some idle time value.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Yea, that's what I said. It's set to 30mins. Works fine.
Is there any apps which makes FTV sleep like SLEEP in setting menu... does?
i want to make FTV sleep manualy...
In settings go to system sleep . all done
The Wukong app can put the fire tv to sleep. Be aware. It is in chinese! https://play.google.com/store/apps/details?id=com.wukongtv.wkremote.client&hl=us
Pressing the OFF button gives you the opportunities to switch between "now, half an hour and cancel"
magdap said:
The Wukong app can put the fire tv to sleep. Be aware. It is in chinese! https://play.google.com/store/apps/details?id=com.wukongtv.wkremote.client&hl=us
Pressing the OFF button gives you the opportunities to switch between "now, half an hour and cancel"
Click to expand...
Click to collapse
That's good to know, I didn't realise you could quickly turn off your AFTV, not sure why but I hate having to scroll all the way down and across just to put in to sleep lol
Although I have the English version so not sure if it has the option to sleep, at work at the moment so can't check
I guess the tablet isn't actually powering down, it's just going into sleep mode, or whatever it's called when the screen shuts off. Anyway, is there a way to keep this from happening when the tablet is plugged into the wall charger? It isn't a major deal but it is sort of annoying when I have something large downloading or have the tablet otherwise doing something on its own, but I'm not actively using it. I like to walk by occasionally and check in on things, but will often find that the tablet has shut off. Then I have to turn it back on, swipe the screen, or login if I have security on. Anyway, it would be much nicer if it would just stay on when plugged in. I've looked through the settings and can't seem to find anything related. If it's there, I'm missing it.
Thanks.
There are different between shut off and standby (sleep mode):
1- Shut off: Your tablet is shutdown, the only way to turn it on is power button.
2- Standby: the screen is off, you just need to press power or home button to turn the screen on in 2 seconds. In order to prevent the screen turn off so quickly, you only need to change the screen timeout to 10 or 30 minutes. If it turns off by itself, your tablet has a problem.
Mine can standby a whole week and it only loses a little charge when waking up.
Beut said:
There are different between shut off and standby (sleep mode):
1- Shut off: Your tablet is shutdown, the only way to turn it on is power button.
2- Standby: the screen is off, you just need to press power or home button to turn the screen on in 2 seconds. In order to prevent the screen turn off so quickly, you only need to change the screen timeout to 10 or 30 minutes. If it turns off by itself, your tablet has a problem.
Mine can standby a whole week and it only loses a little charge when waking up.
Click to expand...
Click to collapse
There is no 30 minute screen timeout on my Galaxy Tab S 10.5. The most I can set it to is 10 minutes, and that's where it's at.
Thanks anyway.
bfollowell said:
I guess the tablet isn't actually powering down, it's just going into sleep mode, or whatever it's called when the screen shuts off. Anyway, is there a way to keep this from happening when the tablet is plugged into the wall charger? It isn't a major deal but it is sort of annoying when I have something large downloading or have the tablet otherwise doing something on its own, but I'm not actively using it. I like to walk by occasionally and check in on things, but will often find that the tablet has shut off. Then I have to turn it back on, swipe the screen, or login if I have security on. Anyway, it would be much nicer if it would just stay on when plugged in. I've looked through the settings and can't seem to find anything related. If it's there, I'm missing it.
Thanks.
Click to expand...
Click to collapse
we call that a screen time out... you can activate the stay awake while charging feature in developer option... how to activate developer option.... go to setting -> about device -> and press the Build Number 7 times. you will see something like developer option activate. then find the stay awake while charging option. that's all. :victory:
edan1979 said:
we call that a screen time out... you can activate the stay awake while charging feature in developer option... how to activate developer option.... go to setting -> about device -> and press the Build Number 7 times. you will see something like developer option activate. then find the stay awake while charging option. that's all. :victory:
Click to expand...
Click to collapse
Super, that's exactly what I was hoping for...
...once I get my completely screwed up tablet running again...
I'm starting another thread.
Thanks!