Related
Hi guys!
First of all I am sorry for posting in this forum but I believe Korean Note 2 is similar in many aspect to N7105 and also there are devs who can read and maybe come up with something.
I have a question for you. Has anyone tried an Android 4.3 custom ROM on e250s (Korean Note 2) ? I am currently on 4.1.2, a combination of Milan 3.0 and Milan 4.0 (I think this ROMs are also for N7105 because in About device section my phone appears to be a N7105 after flashing), with some stock kernel and cwm. I have tried a few 4.3 ROMs for N7105 (CM 10.2, Beanstalk, Illusion) but all get stuck at the boot logo (Samsung Galaxy Note 2). I even tried different kernels, compatible with 4.3 (SJKernel and NeKo) but again, with no luck.
Do you have a solution, link, idea?
Thanks in advance guys!
Any links?
Sent from the TermiNOTEr 2!
borijess said:
Any links?
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
Here is a screenshot of my system.
razvan11malancus said:
Here is a screenshot of my system.
Click to expand...
Click to collapse
Ok that's 4.1.2 don't get it. Thought you had 4.3 touch wiz.
Sent from the TermiNOTEr 2!
borijess said:
Ok that's 4.1.2 don't get it. Thought you had 4.3 touch wiz.
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
Yes. My actual ROM is 4.1.2. I have tried Jedi X19 (4.1.2) and also BeanStalk, Illusion, CM 10.2 (4.3), with the same result. Stuck at boot screen logo.
Ni hao
razvan11malancus said:
Hi guys!
First of all I am sorry for posting in this forum but I believe Korean Note 2 is similar in many aspect to N7105 and also there are devs who can read and maybe come up with something.
I have a question for you. Has anyone tried an Android 4.3 custom ROM on e250s (Korean Note 2) ? I am currently on 4.1.2, a combination of Milan 3.0 and Milan 4.0 (I think this ROMs are also for N7105 because in About device section my phone appears to be a N7105 after flashing), with some stock kernel and cwm. I have tried a few 4.3 ROMs for N7105 (CM 10.2, Beanstalk, Illusion) but all get stuck at the boot logo (Samsung Galaxy Note 2). I even tried different kernels, compatible with 4.3 (SJKernel and NeKo) but again, with no luck.
Do you have a solution, link, idea?
Thanks in advance guys!
Click to expand...
Click to collapse
bbs.gfan.com/forum.php?mod=viewthread&tid=5919447&extra=page%3D2
cbeta1111 said:
bbs.gfan.com/forum.php?mod=viewthread&tid=5919447&extra=page%3D2
Click to expand...
Click to collapse
Thanks.
I have finally installed 4.3 ROM after flashing a file that converts the kernel to e250s.
Vibration issue
Hi guys!
Is anyone else having issues with vibrations when using a N7105 ROM (with Android 4.2.2 or 4.3)? I mean the phone does not vibrate at all.
Do you know a fix or something?
Thanks!
razvan11malancus said:
Hi guys!
Is anyone else having issues with vibrations when using a N7105 ROM (with Android 4.2.2 or 4.3)? I mean the phone does not vibrate at all.
Do you know a fix or something?
Thanks!
Click to expand...
Click to collapse
Use AOSP e250s Thor's kernel (update-0.27-aosp-KO-LTE-e250s-lsi-n7100.zip)
download:
mediafire.com/folder/41s5eea1er9dt/0.27
original thread:
forum.tegraowners.com/viewtopic.php?f=41&t=872
cbeta1111 said:
bbs.gfan.com/forum.php?mod=viewthread&tid=5919447&extra=page%3D2
Click to expand...
Click to collapse
what is that?
Cannot read chinese
can you give us link of downalod?
I own note 2 e250 s
---------- Post added at 02:55 AM ---------- Previous post was at 02:53 AM ----------
razvan11malancus said:
Thanks.
I have finally installed 4.3 ROM after flashing a file that converts the kernel to e250s.
Click to expand...
Click to collapse
which 4.3 ROM did you installed and how?
can you tell us bit more about converting kernels
Rajaasim1980 said:
what is that?
Cannot read chinese
can you give us link of downalod?
I own note 2 e250 s
---------- Post added at 02:55 AM ---------- Previous post was at 02:53 AM ----------
which 4.3 ROM did you installed and how?
can you tell us bit more about converting kernels
Click to expand...
Click to collapse
Hi. This is the link to the boot converter.
http://forum.xda-developers.com/showpost.php?p=36885456
All you have to do is flash this zip file from cwm after you first flash the ROM.
I have tried Illusion and PAC-MAN ROMs (N7105, Android 4.3) and also MIUI v5 for N7105 (Android 4.2.2) and all work fine.
There may be some ROMs (PAC-MAN) that give you "error 7" when flashing. You have to change the first line from META-INF/com/google/android/update script.
How I do that. I prefer to change the ROMs extension from zip to apk, then unzip it using APK Tool and go to the file, change extention to .txt and delete the first line (the one that starts with assert), thus the first line becoming the one with "show progress" or "mount". After that I zip it again with APK Tool and sign the ROM with ApkSign. I do not know why, I cannot sign it with APK Tool. After that, the flashing process should go fine. You have to install the right GApps for the ROM you are being flashing and then the boot converter from the link.
The only issue I have found was the absence of vibrations, but I managed to get it back by flashing Thor Kernel for Note 2, like cbeta1111 and eggymustdie told me. So huge thanks to them.
Good luck! Hope you will manage to install the desired ROM. In my opinion, PAC-MAN ROM is the best so far, with many, many options from CM, AOKP and Paranoid Android ROMs.
cbeta1111 said:
Use AOSP e250s Thor's kernel (update-0.27-aosp-KO-LTE-e250s-lsi-n7100.zip)
download:
mediafire.com/folder/41s5eea1er9dt/0.27
original thread:
forum.tegraowners.com/viewtopic.php?f=41&t=872
Click to expand...
Click to collapse
Thanks a lot man! It works now!
razvan11malancus said:
Hi. This is the link to the boot converter.
http://forum.xda-developers.com/showpost.php?p=36885456
All you have to do is flash this zip file from cwm after you first flash the ROM.
I have tried Illusion and PAC-MAN ROMs (N7105, Android 4.3) and also MIUI v5 for N7105 (Android 4.2.2) and all work fine.
There may be some ROMs (PAC-MAN) that give you "error 7" when flashing. You have to change the first line from META-INF/com/google/android/update script.
How I do that. I prefer to change the ROMs extension from zip to apk, then unzip it using APK Tool and go to the file, change extention to .txt and delete the first line (the one that starts with assert), thus the first line becoming the one with "show progress" or "mount". After that I zip it again with APK Tool and sign the ROM with ApkSign. I do not know why, I cannot sign it with APK Tool. After that, the flashing process should go fine. You have to install the right GApps for the ROM you are being flashing and then the boot converter from the link.
The only issue I have found was the absence of vibrations, but I managed to get it back by flashing Thor Kernel for Note 2, like cbeta1111 and eggymustdie told me. So huge thanks to them.
Good luck! Hope you will manage to install the desired ROM. In my opinion, PAC-MAN ROM is the best so far, with many, many options from CM, AOKP and Paranoid Android ROMs.
Click to expand...
Click to collapse
Thanks for detail response
I am using TWRP touch custom recovery. would this process work for TWRP?
I did not get second part about changing first line from META-INF/com/google/android/update script. where is that? You mean first line of custom 4.3/4.2 ROMs we are going to install?
and also do call recoding work in 4.3/4.2 PAC ROMS because i actually use this function and multi windows ?
This is dev forum, not Q&A. All questions should go in questions forum.
Rajaasim1980 said:
Thanks for detail response
I am using TWRP touch custom recovery. would this process work for TWRP?
I did not get second part about changing first line from META-INF/com/google/android/update script. where is that? You mean first line of custom 4.3/4.2 ROMs we are going to install?
and also do call recoding work in 4.3/4.2 PAC ROMS because i actually use this function and multi windows ?
Click to expand...
Click to collapse
Hi. It should definitely work with TWRP recovery as it installs like a normal zip file ROM.
The update script file is located in the ROM. You have to unzip it and go to that location as I have said in the anterior post.
Call recording works but I did not figured yet how to play the file after it is saved. It saves the file as a .3gpp but I think the problem is with Android 4.3 codecs.
EDIT: It works if you try to play it from the built in file manager. Not with Root Explorer. Do not know why.
Multiwindows work great in PAC-MAN ROM:
TheATHEiST said:
This is dev forum, not Q&A. All questions should go in questions forum.
Click to expand...
Click to collapse
Sorry, I know that this section is for developers only but I think it has more visibility here. It wont happen again.
razvan11malancus said:
Sorry, I know that this section is for developers only but I think it has more visibility here. It wont happen again.
Click to expand...
Click to collapse
That is an extremely bad excuse. What on earth do you think the dev forums would look like if everybody just decided to post non-relevant topics anywhere they wanted to?
TheATHEiST said:
That is an extremely bad excuse. What on earth do you think the dev forums would look like if everybody just decided to post non-relevant topics anywhere they wanted to?
Click to expand...
Click to collapse
Are you moderator or what?
Leave it for them to.move or delete
Sent from my GT-N7105 using Tapatalk 2
Rajaasim1980 said:
Are you moderator or what?
Leave it for them to.move or delete
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
Errr I did! and they have!!!!!
Doesn't mean I cant voice my opinion (Same as you did) as well as report post!
--------------------------------------------------------------------------------------
[ROM] MetroPCS Samsung Galaxy S4 SGH-M919N UVUAMF2 Rooted/Deodexed [ROM]
ARocker said:
!!!This Rom is for the MetroPCS Samsung Galaxy S4 SGH-M919N!!!
Please backup your phone before flashing this!
Flash at YOUR own risk!!
I'm not responsible for anything you do to/with your phone.
Click to expand...
Click to collapse
Code:
[center][b]
Post One : Rom Information
Post Two : Link To Download
Post Three : Reserved[/b]
[/center]
---------------------------------------------------------------------------------------
ARocker said:
This is a M919NUVUAMF2 4.2.2 Rom for the MetroPCS Samsung Galaxy S4 SGH-M919N
with minor modifications and only the modem and MyExtras_TMO.apk removed.
I built this Rom to hopefully kick start a little development for the M919N.
Please use it as a base with which to create Roms, Themes and Mods from our firmware.
Its also great for M919N users who want a fully working rooted and deodexed stock Rom
with only minor modifications that you can flash in recovery.
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------
!!!Attention!!!
ARocker said:
I tested this Rom a bunch on my M919N but could use a few more willing testers to confirm that it works as it should.
Click to expand...
Click to collapse
!!!Attention!!!
ARocker said:
Please be aware if you are currently running a Tmobile Rom and then flash this Rom, you MAY run into the "Prevention Notification" issue. The current fix is to go to this thread Unofficial M919NUVUAMF2 Working!!!! and Odin the phone back to a 100% MetroPCS stock state, then install recovery of your choice, then flash this Rom.
Click to expand...
Click to collapse
!!!Attention!!!
ARocker said:
Please be patient and let it boot!! The first boot can take up to 5 minutes, so be patient and wait for it!!
Click to expand...
Click to collapse
!!!Attention Developers!!!
ARocker said:
All I ask is that you let me know that you're using the Rom and a mention in your thanks.
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------
!!!Specifications!!!
Code:
[center]
Android OS version : 4.2.2
Model : SGH-M919N
CSC version : M919NTMBAMF2
Rooted (Superuser app + su) : YES
Rooted (unsecured boot.img) : YES
BusyBox installed : YES
BusyBox init.d support : YES
Bash support : YES
system/framework is deodexed : YES
system/app is deodexed : YES
[/center]
??Installation Process??
Code:
[center]
-Download ROM, then copy to EXTERNAL SD card
-Boot to recovery
-Factory reset
-Flash ROM
-Reboot
[center][b]Please be patient and let it boot!!
The first boot can take up to 5 minutes,
so be patient and wait for it!![/b][/center]
[/center]
---------------------------------------------------------------------------------------
!!!Thanks!!!
ARocker said:
Thanks to dsixda for his Android Kitchen!
Thanks to lokeshsaini94 for his [GUIDE][how to] CREATE OWN ROM thread!
Thanks to danyvw, techguy1214, exel, dulal18 and anyone else having anything to do with the M919NUVUAMF2.tar that I used to build this!
Thanks to nuttmeg for posting a mirror download location when my DB quit!
Special Thanks to Shabbypenguin!
Special Thanks to testers: danyvw, nuttmeg....
Thanks to all of our contributors!
Click to expand...
Click to collapse
If YOU would like to thank ME for this, you can do so by hitting the THANKS button!
---------------------------------------------------------------------------------------
Download
------------------------------------------------------------------------------------------
!!!This Rom is for the MetroPCS Samsung Galaxy S4 SGH-M919N!!!
Download:
Deodexed_Rooted_M919N_MF2.zip
------------------------------------------------------------------------------------------
If YOU would like to thank ME for this, you can do so by rating the thread and hitting the THANKS button!
Reserved
arocker said:
Reserved
Click to expand...
Click to collapse
Nice job ARocker nice to see good people out here :good::good:
mike28 said:
Nice job ARocker nice to see good people out here :good::good:
Click to expand...
Click to collapse
Thanks mike, I really appreciate it
Nice...
Great work!!!
nuttmeg said:
Nice...
Great work!!!
Click to expand...
Click to collapse
Thanks, old sport
I watched Gatsby recently lol
Hey I Know You Guys What Up Fellas....
Sent from my SGH-M919 using Tapatalk
Nice rom, but the only thing I had a problem with rom is the WiFi not working.
Im sorry about that. You're the only one to report this so far. Try installing again please. Thanks
Sent from my SGH-M919N using Tapatalk
I did 3 times and still doesnt work.. I get this message every time I try to turn on the wifi.
Sent from my SGH-M919N using xda app-developers app
helloyoufool said:
I did 3 times and still doesnt work.. I get this message every time I try to turn on the wifi.
Sent from my SGH-M919N using xda app-developers app
Click to expand...
Click to collapse
Thanks for the screenshot, that helps a lot.
Please go to "settings/more/about device" and check the build number and the baseband version. They should be the same version.
If they are not the same, that is what is causing the "prevention notification" you are getting. Most likely the result of going from a Tmobile Rom to this MetroPCS Rom. They each have different basebands. There are two possible fixes I've read about.
The first is the easiest, just flash the Tmobile rom you were using before. That should take care of the wifi and "prevention notification" and different baseband issues. This means you cant use this rom though.
The second is more time consuming but if you really want to get this metroPCS Rom running this is what you need to do:
Go to this thread Unofficial M919NUVUAMF2 Working!!!! and follow the directions to return the phone back to MetroPCS 100% stock via Odin.
Then install the recovery of your choice, OUDHS, TWRP, CWM, whatever you prefer.
Then flash this Rom again.
Let me know how it works out.
edgeez25 said:
Hey I Know You Guys What Up Fellas....
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
What up...TRAITOR!!!
LMAO :laugh::laugh::laugh: JK
Good to hear from ya edgeez!!! Stop by the old forum once in a while!
arocker said:
What up...TRAITOR!!!
LMAO :laugh::laugh::laugh: JK
Good to hear from ya edgeez!!! Stop by the old forum once in a while!
Click to expand...
Click to collapse
Lol.. Had to... easier to make payments than shell out the 5 bills ... I do go lurk around bro
Sent from my SGH-M919 using Tapatalk
arocker said:
Thanks for the screenshot, that helps a lot.
Please go to "settings/more/about device" and check the build number and the baseband version. They should be the same version.
If they are not the same, that is what is causing the "prevention notification" you are getting. Most likely the result of going from a Tmobile Rom to this MetroPCS Rom. They each have different basebands. There are two possible fixes I've read about.
The first is the easiest, just flash the Tmobile rom you were using before. That should take care of the wifi and "prevention notification" and different baseband issues. This means you cant use this rom though.
The second is more time consuming but if you really want to get this metroPCS Rom running this is what you need to do:
Go to this thread Unofficial M919NUVUAMF2 Working!!!! and follow the directions to return the phone back to MetroPCS 100% stock via Odin.
Then install the recovery of your choice, OUDHS, TWRP, CWM, whatever you prefer.
Then flash this Rom again.
Let me know how it works out.
Click to expand...
Click to collapse
Is there a flashable zip to install the metro PCS radio? That to will change your baseband
Sent from my SGH-M919 using Tapatalk
LoopDoGG79 said:
Is there a flashable zip to install the metro PCS radio? That to will change your baseband
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Thanks for your help and you are absolutely correct! Unfortunately there's no radio zip to flash for our phone and I have yet to make one. I'm no dev, I just follow directions reasonably well. I have yet to find a guide to make a flash-able radio zip and honestly, I'm working on something else at the moment, so I haven't really looked. For now, the fix I gave is the only fix for this issue. In the future that will probably change. Thanks again for your assistance
I see a lot of familiar folks here. Nice work Arocker:good:
idiot
im an idiot
but thanks for this jaja
could you maybe put up how you rooted the s4 to install the recovery? i tried the tmobile one and it bricked my phone
robcop19 said:
im an idiot
but thanks for this jaja
could you maybe put up how you rooted the s4 to install the recovery? i tried the tmobile one and it bricked my phone
Click to expand...
Click to collapse
Hi Robcop,
Tmobile TWRP is what I use too, though there are versions that dont work properly for our phone.
Version 2.5.0.2 is definitely working for our phone.
Why dont you stop by here:
http://androidforums.com/metropcs-galaxy-s4-all-things-root/
Its a place for the MetroPCS S4
Check out the posts, including a thread that walks you through installing a recovery and easy rooting.
I look forward to seeing you there. Say hello when you do.
strange things are happening
I never had this problem before, I have downloaded the zip 4 times thinking I did something wrong with the process as simple as it is .lol
Used the stock my files app to copy the zip to the 64gb external sd card and even this last time I created a couple folders and put it in there although when I boot to recovery and factory reset then chose zip fromexternal sd card its not there and whats weird even more is I see an older file that I have deleted several times back again, its the root_zip I used with odin to originally root the device. Crazy huh I think the sd card must be damaged.
Have long since emerged android 4.4.2 and no release for the Galaxy staff there Fame .. Help please! Some light on how to install an kitkat in Mobile?
Enviado de meu GT-S6810B usando Tapatalk
Laelson said:
Have long since emerged android 4.4.2 and no release for the Galaxy staff there Fame .. Help please! Some light on how to install an kitkat in Mobile?
Enviado de meu GT-S6810B usando Tapatalk
Click to expand...
Click to collapse
all of patch is going to samsung,another way is make a custom rom like @wulsic doing
about news Kitkat for another Samsung device is stuck on S3 (i think),cause the lastest news i read is ,new touchwhiz launcher cannot run correctly on S3 with 1 gb of ram,and we should patient cause when S3 is not have Kitkat ,and we too not have way ,cause we have 512 mb of ram
Note:
you can check the lastest firmware for fame on www.sammobile.com,and go to tab firmware
When kitkat was released there were leaks that showed that Fame might get the update because it was supposed to support mid/low -end devices, but as we can see there are no updates.. i'll never get another samsung phone again, it's just my second and it's the last.
davexd97 said:
When kitkat was released there were leaks that showed that Fame might get the update because it was supposed to support mid/low -end devices, but as we can see there are no updates.. i'll never get another samsung phone again, it's just my second and it's the last.
Click to expand...
Click to collapse
A guy there in forum CyanogenMod is working on CM10 and 11 "I am waiting for results. Believe we will soon have android 4.4.2 for kitkat Fame patience .. boy![emoji6]
Laelson said:
A guy there in forum CyanogenMod is working on CM10 and 11 "I am waiting for results. Believe we will soon have android 4.4.2 for kitkat Fame patience .. boy![emoji6]
Click to expand...
Click to collapse
Well that guy is me lol but uhh Laelson we have some progress. The Recovery is now 6.0.4.9 and it now has support to flash kitkat based roms.
https://drive.google.com/file/d/0B1u3mnq0nstfZnVSTDZpR0JKV2M/edit?usp=sharing
It still doesnt boot but its a kernel problem i believe that we need to fix it will take some time but yh so is life:angel:
wulsic said:
Well that guy is me lol but uhh Laelson we have some progress. The Recovery is now 6.0.4.9 and it now has support to flash kitkat based roms.
https://drive.google.com/file/d/0B1u3mnq0nstfZnVSTDZpR0JKV2M/edit?usp=sharing
It still doesnt boot but its a kernel problem i believe that we need to fix it will take some time but yh so is life:angel:
Click to expand...
Click to collapse
I will apply the new recovery, and as the kernel? can not use another model? or must be the fame, only modified?
Laelson said:
I will apply the new recovery, and as the kernel? can not use another model? or must be the fame, only modified?
Click to expand...
Click to collapse
Well i still need to make a good working kernel for the kitkat cm11 rom just be patient :angel: i also contacted somebody else who is working on almost the same thing as me but he is further so i asked for advice with the kernel since the source is also 4.1.2 or he also knows a bit wether which patches need to be applied cause it will be faster then that i need to find everything myself since i am not a real kernel dev xd.
But yeah you can try to flash it but yeah... Rom doesnt boot yet but i think before the summervacation it might boot, or yeah my summer vacation is started next week i thought or the week after idk
Here...
Laelson said:
Have long since emerged android 4.4.2 and no release for the Galaxy staff there Fame .. Help please! Some light on how to install an kitkat in Mobile?
Enviado de meu GT-S6810B usando Tapatalk
Click to expand...
Click to collapse
Use this url, is in Spanish but, easy to understand (video inside). Any trouble, i'll glad to help. Hope this helps.
galaxyfame.jimdo.com/rom-kitkat-pro-by-c-s/
Regards.
Farashto said:
Use this url, is in Spanish but, easy to understand (video inside). Any trouble, i'll glad to help. Hope this helps.
galaxyfame.jimdo.com/rom-kitkat-pro-by-c-s/
Regards.
Click to expand...
Click to collapse
that's a custom rom from stock ?????
Dunno
faizauthar12 said:
that's a custom rom from stock ?????
Click to expand...
Click to collapse
Really, i don't know. I'm new in all this and learning every day.
Farashto said:
Really, i don't know. I'm new in all this and learning every day.
Click to expand...
Click to collapse
Im not sure but i thought the guy in the video with that rom was using cwm 6.0.4.6 so... i thought that that version wasnt able to flash kitkat roms so yh.... I want to be 100% sure so im downloading itnow since guys with bad internet connection need to download hours to get the rom and i only around 3 minutes.
EDIT: Like i thought just 4.1.2 stock rom with kitkat theme a bit and edited settings to have more features and android version was 4.4.2 it said but in the fingerprint(Also for playstore neccesary) was 4.1.2)
The guy who made the rom has based it on the Latin stock rom 4.1.2(http://terafile.co/3395503ca6cc)
Farashto said:
Use this url, is in Spanish but, easy to understand (video inside). Any trouble, i'll glad to help. Hope this helps.
galaxyfame.jimdo.com/rom-kitkat-pro-by-c-s/
Regards.
Click to expand...
Click to collapse
I had installed the Deluxe C & S.. had a few mistakes but with GAPPS, could not be updated because they were modified .. then several applications not working (google+, hangouts, among others.) that these problems still there?
Kernel for cm11 ??
andris 934 said:
Kernel for cm11 ??
Click to expand...
Click to collapse
Im still busy with the kernel to make it good working to boot to cm11
And Kitkat is supposed to support low/mid - end devices? Probably Touchwiz but that explains how Google is able to release new versions of android and make them available as updates almost immediately on nexus devices. Im making a google kitkat experience rom but since no kitkat available for our device I have to use jelly bean as base. (Techno rom) Too complete it all I need is to change status bar and boot animation. And UI if possible because I'm new to making roms and this is my first. Any help is appreciated. :laugh:
please help me...
faizauthar12 said:
that's a custom rom from stock ?????
Click to expand...
Click to collapse
can i use s6810 rom in s6812 if not how can i use s6810 rom in s6812....
ayushchauhan said:
can i use s6810 rom in s6812 if not how can i use s6810 rom in s6812....
Click to expand...
Click to collapse
i think ,in this forum,you can find custom rom for S6812
Hello every one i have juste finished to deodex ROM installed on MY S3 NEO
- OFFICIAL firmware ( stock rom ) and are I9301IXXUANH1_I9301IPHNANG1_I9301IXXUANF2
I have deodexed all the ROM and also add init.d on boot for complet ROM i need some help for updater script PM me if you need help to make ROM flashable .
if not here are flashable ZIP for only 3 folder on system
1-app
2-framwork
3-priv-app
all .odex files are deodex and compresed and working fine with out any problem if you have any problem tel me know any feedbac are welcome
PS: apps are not changed or removed all are original dump from my device
Latest firmware info
PDA: I9301IXXUANH1
CSC: I9301IPHNANG1
MODEM: I9301IXXUANF2
Version: Android 4.4.2
Added: 2014-08-27
Click to expand...
Click to collapse
how flash it
1- reboot into recovery
2- install zip
3- reboot device and enjoy deodexed ROM
4- you win 300 MB after odex remove
here is
GT-I9301I-deodex_I9301IXXUANH1_I9301IPHNANG1_I9301IXXUANF2.zip
md5 : b691e4dfab0ed670c254c7821d9d3aeb
size: 641 MB
size before deodex are more than 900 Mo Enjoy dont forget presse thank you more than 89 download and only 9 thanks ? some user have brocken hand can't thanks for work this can let me stop support and make my own rom for my self thanks help devloper and give he power to continue devlopement dead thread kill all powwer
Big job, thanks!
Sent from my GT-I9301I
rod555 said:
Big job, thanks!
Sent from my GT-I9301I
Click to expand...
Click to collapse
U are welcome ^^
spawk said:
Hello every one...
Click to expand...
Click to collapse
Thanks, mate! Great job!
Thanks a lot !
more than 89 download and only 9 thanks ?
Mmmm , this is a shame , but not for a master like you SPAWK , you did a good job and you have to keep updating you rom with new features and believe me you will get more than thanks , dont forget that you cannot have 100% of thanks , and S3 NEO is anewer device so patience , i have downloaded many roms and i thank rarelly developpers in post i do it with MY HEART without doubt but if i find bugs i post them , so doooooooont abandon us like this:crying::crying::crying:
Thanks a lot for this!
avatarma said:
more than 89 download and only 9 thanks ?
Mmmm , this is a shame , but not for a master like you SPAWK , you did a good job and you have to keep updating you rom with new features and believe me you will get more than thanks , dont forget that you cannot have 100% of thanks , and S3 NEO is anewer device so patience , i have downloaded many roms and i thank rarelly developpers in post i do it with MY HEART without doubt but if i find bugs i post them , so doooooooont abandon us like this:crying::crying::crying:
Click to expand...
Click to collapse
:silly:360 downloads
Plz for dual sim version also
can i install it when i have cyanogenmod installed, not stock firmware?
puszekkk said:
can i install it when i have cyanogenmod installed, not stock firmware?
Click to expand...
Click to collapse
no are stock and cyanogen are custom rom this only stock rom original come on phone juste deodexed for more space inside
Hi spawk,
I am trying to deodex stock XCSAQE1 with no success, I am using Auto-Deodexer 4.4.x and had a go with some other tools, but I can't get system to boot up if I deodex the framework. Have you any idea?
ASALAMOALIKUM FRIENDS................Not enough time!
how to increase internal memory of SGY s5360 using rom cm11...............
Do not try this method on any other rom otherwise you may be ruin
BUG : If you are using RC14 than it causes wifi no connection error so it is better to use the latest Nightly which does not show such error.
steps
1.Install Root explorer
2. Partition your sd card.... If you dont know about partition than simple Google It
3. Download the file Pakium.zip and extract 40int2ext.
4. now copy the file and paste it to system/etc/init.d
5.now set permission. tick all the 9 blocks and reboot
yuppyy thats it
Hit thanks if it works :good: :good:
Qstn
Most easy steps buddy gonna try it
just tell me which Rom (Name Of The rom) Did U Use And Also The Kernel
YEAH !!! THANKS DUDE ! I really apprecaite your work !:good::good:
it will break delta updates right?
remember guys whenever you change the rom. plz format the second partition........ if not than when you do this method again the app which donwloded came back
Himan Boro said:
Most easy steps buddy gonna try it
just tell me which Rom (Name Of The rom) Did U Use And Also The Kernel
Click to expand...
Click to collapse
Rom : cm-11-20141227-NIGHTLY-totoro
Kernel : [email protected]#1 (2.6.35.7)
AND1 Master said:
it will break delta updates right?
Click to expand...
Click to collapse
Sorry man no idea about that i am using the latest nightly cm-11-20141227-NIGHTLY-totoro
izzatamir said:
YEAH !!! THANKS DUDE ! I really apprecaite your work !:good::good:
Click to expand...
Click to collapse
Your welcome
galaxy
using the same ROM you the wifi does not care. what can I do to fix this? obs; I'm using the latest version cm11 .0-20150211 now and the error continues, the wifi does not care. one way to fix this friend? please help me
I mentioned above that this problem occur after doing this method . Still i can't find the way to fix it but i will try my best to fix it....
yes, you mentioned. but is using the same ROM I tested and the wifi does not work ... tested the rom cm11 Rom : cm-11-20141227-NIGHTLY-totoro
Kernel : [email protected]#1 (2.6.35.7). how you installed this ROM is to explain?
never mind, is clear by searching in some another topic here..
lalylaly said:
yes, you mentioned. but is using the same ROM I tested and the wifi does not work ... tested the rom cm11 Rom : cm-11-20141227-NIGHTLY-totoro
Kernel : [email protected]#1 (2.6.35.7). how you installed this ROM is to explain?
Click to expand...
Click to collapse
It is a bug dude.