Related
Hi i've come here many times before for any hiccups that came up for me with my phone but this time I believe I need help. I'll start it off with me earlier this week I was running CyanogenMod 10.1 and felt like I wanted to change it up leading me to isntall synergy onto my S3 (completed two nights ago). Today I decided it just wasnt doing it for me. Picked a new ROM ( Paranoid ).
This is where the problem comes in, I started the usual to flash a new ROM, put it into recovery and then started the factory/data reset. it froze waited half an hour for it to complete but it did'nt. Rebooted it into recovery as now I cant boot back into the software anyways. tried the same thing but wiped the cache and dalvik cache first. same thing happened froze on the factory reset. At this time I decided to reset it completley and get rid of the root, flashing the stock firmware. Odin also froze everytime, I cant even reinstall the stock firmware after failing everytime around the Nand area. I found this thread (http://forum.xda-developers.com/showthread.php?t=1840030) with I think a similar problem im really not sure as I cant do anything but the thing is, is that its for Verizon Galaxy S3 ( im on Rogers Canada). I'm sure I can fix this somehow as I can put it into download mode still but any help from the community would be greatly appreciated.
How far does Odin get during the stock ROM flash, before it freezes up on you?
I would try to Odin a stock recovery. Not the ROM & everything, just the recovery. Then go into the stock recovery and wipe everything.
Then Odin the stock ROM. Maybe try an ICS one if you were failing on the JB one.
CZ Eddie said:
How far does Odin get during the stock ROM flash, before it freezes up on you?
I would try to Odin a stock recovery. Not the ROM & everything, just the recovery. Then go into the stock recovery and wipe everything.
Then Odin the stock ROM. Maybe try an ICS one if you were failing on the JB one.
Click to expand...
Click to collapse
It says Nand write start, and then complete (write) operation failed. On the phone in download mode it says Secure check Fail : aboot . CMW works for me still ? is that what you mean ? if so the data/factory reset freezes. I do have a RecoveryGalaxyS3USCanada.tar file in my Root folder, if I should flash that.... but its been so long I forget what its for. Thank you for the feedback ive been searching all day and wasnt able to find anything useful so far. Right now im downloading older stock firmwares to attempt to flash them, hopefully they pan out.
The utility in this thread offers an option to flash the stock recovery. I'd try it out and see what happens!
http://forum.xda-developers.com/showthread.php?t=1746665
Flash stock recovery and then boot to the stock recovery and restore to defaults. Then flash a stock ROM.
Stock recovery = Samsung recovery, not TWRP or Clockwork.
I had 2 soft bricks with cm this week. Had to Odin back to rooted stock for one. The other back to rooted stock and had to factory reset with Samsun 3e recovery before the phone would boot.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Okay i've installed everything (drivers, toolkit, deleted Kies) and now when im going in to flash the stock recovery it says its waiting for USB debugging, which I can't re-anable since im stuck in a boot loop. Am I screwed here ?
French1747 said:
Okay i've installed everything (drivers, toolkit, deleted Kies) and now when im going in to flash the stock recovery it says its waiting for USB debugging, which I can't re-anable since im stuck in a boot loop. Am I screwed here ?
Click to expand...
Click to collapse
can you still access recovery? i'm assuming it's twrp or cwm
if so, here's cwm flashable stock firmware from upndwn4par. flash it, boot in, turn on debugging.
http://d-h.st/8OQ
xBeerdroiDx said:
can you still access recovery? i'm assuming it's twrp or cwm
if so, here's cwm flashable stock firmware from upndwn4par. flash it, boot in, turn on debugging.
]
Click to expand...
Click to collapse
Thank you so much! I doubted it at first just because of the other roms and stock ones also never worked but this one has it up and running smoothy. I want to play it safe just so I dont screw up again so I'm gonna ask you guys one more thing.. Would it be safe to try and flash the Paranoid ROM now? ( I dont believe it was the problem earlier since I never actually got to installing it). The problem was something around the lines of not being able to write things onto the device. ex Data/Factory reset freezing everytime on CMW, while Odin also failed everytime it made to the step of flashing/writing in the stock ROM.
Thanks everyone, your're all very helpful !
If it were me, I'd Odin a stock/rooted JellyBean ROM first. Just to get to get all the correct files & structure on there. THEN I would flash whatever you want.
First, sorrt to speak french, but thatnll be more easy for me to tell it.
A partir du moment ou tu peux passer en mode download, tout va bien ^_^
Il m'est deja arrive sur mon teos de corrompre ma partition systeme et de repartir comme si de rien n'etait avec un flash.
Reflashe avec odin et reessaie
Sent with my AiKi and optimus rom
CZ Eddie said:
If it were me, I'd Odin a stock/rooted JellyBean ROM first. Just to get to get all the correct files & structure on there. THEN I would flash whatever you want.
Click to expand...
Click to collapse
French1747 said:
Thank you so much! I doubted it at first just because of the other roms and stock ones also never worked but this one has it up and running smoothy. I want to play it safe just so I dont screw up again so I'm gonna ask you guys one more thing.. Would it be safe to try and flash the Paranoid ROM now? ( I dont believe it was the problem earlier since I never actually got to installing it). The problem was something around the lines of not being able to write things onto the device. ex Data/Factory reset freezing everytime on CMW, while Odin also failed everytime it made to the step of flashing/writing in the stock ROM.
Thanks everyone, your're all very helpful !
Click to expand...
Click to collapse
i agree with coming from stock firmware when flashing. i would also make sure my cwm was up-to-date while i was at it. i would also boot into recovery and make a nandroid now so you'll have one. with that being said, here ya go:
http://forum.xda-developers.com/showthread.php?t=2179330
in the above link:
step 1: take the time to backup your imei if you havent already
step 2: this is stock with root already injected
step 3: if you dont have rom manager, download it and update your recovery if you're not running 6.0.2.3 or higher
step 4 & 5 are self explanatory
cheers
xBeerdroiDx said:
i agree with coming from stock firmware when flashing. i would also make sure my cwm was up-to-date while i was at it. i would also boot into recovery and make a nandroid now so you'll have one. with that being said, here ya go:
http://forum.xda-developers.com/showthread.php?t=2179330
in the above link:
step 1: take the time to backup your imei if you havent already
step 2: this is stock with root already injected
step 3: if you dont have rom manager, download it and update your recovery if you're not running 6.0.2.3 or higher
step 4 & 5 are self explanatory
cheers
Click to expand...
Click to collapse
The only thing so far (that I have noticed) is that the data/factory reset still does not work, I'm going to continue like you said earlier and flash stock recovery and my own stock firmware for Rogers now that I have turned debugging mode on. my cmw currently is 6.+ and my previous Nandroid backups would also get stuck when I tried to restore to them, I'm assuming that since I still can't factory reset that I wont be able to restore back to them but I will see. Should I make another nandroid even when its still in a semi-messed up state ?
Right now I seriously just want to get rid of the stupid data reset problem.
French1747 said:
The only thing so far (that I have noticed) is that the data/factory reset still does not work, I'm going to continue like you said earlier and flash stock recovery and my own stock firmware for Rogers now that I have turned debugging mode on. my cmw currently is 6.+ and my previous Nandroid backups would also get stuck when I tried to restore to them, I'm assuming that since I still can't factory reset that I wont be able to restore back to them but I will see. Should I make another nandroid even when its still in a semi-messed up state ?
Right now I seriously just want to go back to step one of everything, unrooted stock fimrware with access to Gapps and continue from there. Most of all get rid of the stupid data reset problem.
Click to expand...
Click to collapse
where are you saying the data/factory reset isnt working? cwm or in android settings?
i would download rom manager and update cwm to latest (6.0.3.0), boot into cwm recovery and try making a nandroid.
and i dont think you're as messed up as you think you are right now. you're rooted, with stock firmware and a custom recovery.
when i was ready, i would update recovery, in recovery make a backup, (still in recovery) wipe data/factory reset, wipe cache/dalvik, flash rom
xBeerdroiDx said:
where are you saying the data/factory reset isnt working? cwm or in android settings?
i would download rom manager and update cwm to latest (6.0.3.0), boot into cwm recovery and try making a nandroid.
and i dont think you're as messed up as you think you are right now. you're rooted, with stock firmware and a custom recovery.
when i was ready, i would update recovery, in recovery make a backup, (still in recovery) wipe data/factory reset, wipe cache/dalvik, flash rom
Click to expand...
Click to collapse
Google apps arent showing up for me either, Tried installing them and they did succesfully but i still dont see them. anyways I'm on a slightly lower version of cmw then 6.0.3.0 , can I flash the new version over the current one im on, since I cant install through the play store ?
French1747 said:
Google apps arent showing up for me either, Tried installing them and they did succesfully but i still dont see them. anyways I'm on a slightly lower version of cmw then 6.0.3.0 , can I flash the new version over the current one im on, since I cant install through the play store ?
Click to expand...
Click to collapse
boot into cwm and flash gapps again. flash twice to be sure. reboot. lemme know
I believe everything is working perfectly now, installed Rom manager from the web and updated cmw. Once more tried to data wipe from cmw and it froze again this time crashing by itself, I then went back into it went and formatted my data and then tried the wipe data, this time it worked for me and I proceeded to wipe the cach and dalvik, installed paranoid and everthing is working fine, ill post an update if i notice anything else happens but so far it looks perfect. Thank you so aton, I appreciate it guys especially you "Beer". Now I can relax on my birthday and stop tinkering around on my phone haha.
( Not sure why Gapps wer'nt working earlie,r but i'm done )
Same problem here
The same thing happened to me while trying to Odin to ATT stock rom. Flash stopped half way and Odin showed failed. Tried to reboot into download mode to repeat procedure and would not go into download mode. Phone will reboot but into android recovery mode. When I try to run an update from sd card I get a "file verification error" and the process aborts. I'm going to try this process to see if I have any better results.
Hey guys all my restores are failing half way through. It also fails if I try to factory reset or wipe dalvik but wipe cache works fine It fails if i try flash any ROM.. And if I try to boot to system it shows SG logo then black screen I'm really kind of lost here. I've already tried flashing 4 different versions of Twrp/clockworkmod and I get the same result every time. The roms I'm trying to flash were running fine on my device before this happened. Never seen this before please help thank you.
Sent from RootBox infected sensation or my PacMan e739
djwuh said:
Hey guys all my restores are failing half way through. It also fails if I try to factory reset or wipe dalvik but wipe cache works fine It fails if i try flash any ROM.. And if I try to boot to system it shows SG logo then black screen I'm really kind of lost here. I've already tried flashing 4 different versions of Twrp/clockworkmod and I get the same result every time. The roms I'm trying to flash were running fine on my device before this happened. Never seen this before please help thank you.
Sent from RootBox infected sensation or my PacMan e739
Click to expand...
Click to collapse
is this an i747 or i747m (carrier?)? what was the last thing you did to the device/had you just modified or flashed something? were you using recovery or odin to flash the 4 different recoveries?
xBeerdroiDx said:
is this an i747 or i747m (carrier?)? what was the last thing you did to the device/had you just modified or flashed something? were you using recovery or odin to flash the 4 different recoveries?
Click to expand...
Click to collapse
I have sgh i747 at&t us model. Unlocked Sim for Tmobile use. Before having problems. I flashed vanilla rootbox att nightly. it was running fine then I flashed acid audio mod. And it worked but not well with my player of choice. So i flashed a restore from fright before the sound mod. And all I got was 2 different Samsung logos then black screen. At this point Twrp started asking for a password. I tried an older backup. (rootbox stable) and it booted fine. Everything seemed to be working. But when I rebooted again I got the 1St SG logo then black screen. Now recovery doesn't read anything on the internal card as well as the other problems I stated. I used mskips toolkit to flash Twrp originally and now I've been flashing back and forth between recoveries using recovery flashable zips. Also every time I flash roms or restore I did factory wipe/cache/dalvik and after I started having these issues I tried wiping system and that didn't help either. Thanks for trying to help
Sent from RootBox infected sensation or my PacMan e739
what recovery are you currently sitting on?
Twrp 2.4.4.0 is what I started with and now I'm back on it but from a flashable zip this time instead of whatever mskips toolkit used
Sent from RootBox infected sensation or my PacMan e739
here is the link to an odin flashable twrp 2.5.0.0 tar: http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.5.0.0-d2att.tar
and here's a recovery flashable twrp 2.5.0.0 zip link: http://forum.xda-developers.com/attachment.php?attachmentid=1917517&d=1367104589
if you flash in recovery, be sure to reboot recovery in order to boot into the new version. i'm sure you know most of this but i'm just trying to cover all the bases.
is twrp still asking for the password or were you able to get passed that?
if you have a micro sd card, you could place a ROM/gapps on it, flash this latest twrp recovery from odin or recovery, perform a full wipe (cache, dalvik, data, system) and flash the ROM/gapps. see if that remedies your situation.
if you dont have a micro sd card, and it appears you've wiped the system so there's no OS, you may have to odin back to rooted stock and start over. keep me posted
Still no luck. i flashed twrp2.5 through recovery and after rebooting back to recovery it still asked for a password so I hit cancel at which point it lets me continue and after full wipe as you described above and a fresh flash of stable rootbox 3.9.1 (md5 matched) im still in the same situation. also factory wipe says failed still
I think at this point if it were me, I would Odin flash back to stock then start from scratch. Pain in the butt I know, and no guarantee, but usually flash back to stock is a safe bet.
Another option is to grab the Odin flashable cwm tar in the "root from recovery" method in the general section. Flash the tar, boot into recovery and flash the 6.0.3.1 zip in post #2 of my signature link. Reboot recovery and try wiping/flashing again.
Since you're not entering the password in TWRP, I think that's why you're not getting successful wipes and flashes.
now I used the power+home+vol down button combo to see if bootloader would start. it gave me a choice to download a custom rom or cancel so I canceled and the phone rebooted and i was blessed with the beautifull rootbox animation. my rootbox 3.9.1 nandroid booted and seems to be running fine. Now Im afraid to reboot in fear it will start the whole process over again. any suggestions? or should I just leave it powered on for the rest of its life lol
edit: well I got up the guff to reboot and everything came back fine again WTH. this is so weird, I wish I had a clue what happened. anyways I just wanted to thank you guys one more time for you help. hopefully we wont have to come back to this thread. Peace ;-]
Man that is strange. If that ever happens again it would be interesting to see the log if you can get it. I wonder if there were issues mounting a partition and/or your SD card. If TWRP and CWM were both having an error and the files were on your SD card that would probably be the only thing in common that could cause something like this. Some Transformers seemed to have the password issue, but doesn't seem related to your experience. Glad you got it sorted.
Hey guys hopefully you can help me. I was rooted for like 3 or 4 months now and have had not many problems or not anything I couldn't fix my self. My phone gets stuck on the Samsung Galaxy s4 screen anytime I reboot. I have tried different roms, different kernels, I even odin back to stock. I was using TWRP 6.0 then reverted back to TWRP 5.2 to see if that was causing the problem. Still have problems. I am going to re download the stock tar to see if it was a bad download but Odin checks the md5 and says it was good. Odin says passed every time also. Odin version is 3.07.
I get a error before and when trying to wipe dalvic cashe. I can wipe reg cash no problem. I think my phone is not mounting the internal storage when it reboots. I could be way off but need help asap. If I format super wipe with twrp then restart twrp and then factory reset I can install or restore a rom some times but still cant restart the phone. Any hope would be greatly appreciated.
EDIT
I wanted to edit my previous commet. LiquidSmooth seems to be running fine. So TW roms and GE roms **** up on my phone when I restart. so is it the internal systems when I have TW roms. I think it has something to do with partictions messing around maybe.
I like TW roms and want to continue to use them... Thank you
Get into recovery and do a factory reset, it is a must after you odin back to stock. Make sure you are also using a tmo kernel.
Thanks you
I got this problem a few days ago and found some topic including this one. You should check it out.
Well, what worked for me was Odin to stock firmware, root again, install recovery then custom rom. Now it's working fine. Try to downloading it again to see if it works. I downloaded mine from here, rooted and recovery it using this one.
TheAxman said:
Get into recovery and do a factory reset, it is a must after you odin back to stock. Make sure you are also using a tmo kernel.
Thanks you
Click to expand...
Click to collapse
+1 to what he said. I bet if you go into the stock recovery after odin flashing it will say something like cannot mount /data partition. Factory reset there, and it should fix that and make it mountable. (Its important to use the stock recovery factory reset after the odin, don't flash a custom recovery right after flashing)
This was incredibly helpful. I had the same issue. Thank you.
This is also applicable to the Verizon Wireless model.
Hey Guys,
I just got a new Samsung Galaxy S3 SGH-I747 in the mail and I immediately started to install Cyanogenmod. I have installed it on two S3's in the past, but this time I had no idea about the new bootloader problems after Android 4.3 (I think?). I got CWM touch installed with no problems via Odin, but when I tried to use the Unified Android Toolkit thing to root and stuff I got stuck in a boot loop. The phone would not boot past the Samsung logo, not the animated one with the purple light, but the one that shows the phone model.
I have tried everything I could think of and all that I tried to google for the past couple hours to no avail. I stupidly did not make a backup of my stock ROM, and I couldn't find a stock 4.4.2 ROM except this one that says it is stock but with root. I flashed that ROM and then it booted past the Samsung logo and the animated one, but is now stuck on the AT&T logo. I looked up that problem and couldn't find any real information on that problem except one thread where it said I should install Kies and let it do the Firmware Upgrade and Initialisation option. That failed and then my phone would only turn on straight to download mode.
I reflashed CWM and that worked so I thought that if I tried to install Cyanogenmod 11 it might work because that ROM is 4.4.1 or higher (Again, I think?). Now it's back into the loop where it makes it past the samsung stuff but then gets stuck on the AT&T logo. Is there anything I can do?
Thanks,
Jemimacakes
Did you try wiping cache, data, and Dalvik in CWM?
Did you try installing CM10.2 from CWM?
audit13 said:
Did you try wiping cache, data, and Dalvik in CWM?
Did you try installing CM10.2 from CWM?
Click to expand...
Click to collapse
Yes, I have tried clearing stuff in both CWM and stock recovery. Im not sure about the Dalvik one though, unless that is cleared when you do factory reset and clear cache I didnt do it. I can try flashing CM10.2 ( which I would prefer to have over 11), but my understanding is that my boot loader will not let me install anything that uses any lower versions of android, but I'll give it a shot and let you know.
Ok guys,
I tried to install Cyanogenmod 10.2 and when I put it on my sd card and tried to install it with CWM It threw and ton of errors that look like this.
assert failed: getprop("ro.bootloader") == "I747UCDLK3" || getprop("ro.bootloader") == "I747UCDMG3" || etc etc.
Im not super experienced with programming, but im guessing that CM10.2 can find any bootloader it can use? Im not sure what my bootloader is if that is the case, but I can boot into recovery so I must have something, right?
Anything I can do?
Thanks
Jemimacakes
You should try flashing cm10.2 just to see if you can get your phone to boot. By booting the phone, you can determine your bootloader and modem.
Edit: okay, cm10.2 doesn't work. Are you running the latest version of cwm? Maybe try twrp?
Hey,
I did have the latest version of CWM, but I tried it on TWRP and got the same errors
audit13 said:
You should try flashing cm10.2 just to see if you can get your phone to boot. By booting the phone, you can determine your bootloader and modem.
Edit: okay, cm10.2 doesn't work. Are you running the latest version of cwm? Maybe try twrp?
Click to expand...
Click to collapse
Hey,
I have now tried both custom recoveries and gotten the same errors on both, and I made sure I had the latest version of each. Can I flash the firmware from 4.3 and then install CM10.2? Will that work? I really don't want to hard brick my phone.
EDIT: I installed ADB to find out what my bootloader was, and it returned that I had the NE4 version. Is there a way to get the MJB version safely so I can install 10.2?
At this point I just want it to boot up to anything, so if that is easier to do than get CM to work then im completely open.
You cannot go back to MJB from NE4.
How did you try to install CM the first time? Did you use the install manager or a custom recovery?
The last time I installed CM on a i747 was back when the phone was on 4.1.1. The second phone I installed it on was the international version of the phone, also on 4.1.1. I used a custom recovery both times. I bet if I would have used the new installer on this phone it would have worked, but I was trying some other stuff because I was curious and ended up breaking it.
IT BOOTED!
I reflashed the stock firmware + root, reinstalled stock recovery and wiped everything I got it to boot into its stock ROM. From this point, where do I go? Will the CM installer work or will it just brick it again?
Thanks
Jemimacakes
I would copy a custom rom such as cm11 to the internal and external sd card.
I would then download the latest version of philz touch for the d2lte. Get Odin 3.07. Put the phone in download mode, open Odin, uncheck all options except f reset time. Flash philz, when you see reset in the status window, remove USB cable, remove battery, insert battery, boot into recovery, create a nandroid of your current rom, flash cm11, wipe cache, wipe data, wipe dalvik, reboot.
audit13 said:
I would copy a custom rom such as cm11 to the internal and external sd card.
I would then download the latest version of philz touch for the d2lte. Get Odin 3.07. Put the phone in download mode, open Odin, uncheck all options except f reset time. Flash philz, when you see reset in the status window, remove USB cable, remove battery, insert battery, boot into recovery, create a nandroid of your current rom, flash cm11, wipe cache, wipe data, wipe dalvik, reboot.
Click to expand...
Click to collapse
Which version of CM11 should I get. On the site I see that the last version of CM11 for the I747 (d2att) was released on feburary 16, is this one based on 4.4.2?
EDIT: Also, I should copy CM11 to both the internal and external storage? Why is this?
You should be using roms made for the d2lte.
I suggest both because cwm or twrp may see one but not the other. This doesn't usually happen but I am always paranoid about something going wrong as flashing always involves risk and I like to minimize risks and be prepared for disaster.
audit13 said:
You should be using roms made for the d2lte.
I suggest both because cwm or twrp may see one but not the other. This doesn't usually happen but I am always paranoid about something going wrong as flashing always involves risk and I like to minimize risks and be prepared for disaster.
Click to expand...
Click to collapse
Alright, but I have the at&t version of the phone. Are they both compatible with one another?
EDIT: OK, correct me if im wrong, but my new understanding is that CM now has releases for general versions of phones, so the most recent update of CM for my phone is the d2lte, not d2att?
Before unified builds for the msm8960 were started, the i747 was known as the d2att and the i747m was known as the d2can.
audit13 said:
Before unified builds for the msm8960 were started, the i747 was known as the d2att and the i747m was known as the d2can.
Click to expand...
Click to collapse
Hello again,
Thanks a ton Audit, my phone is up and running with the latest cyanogen nightly! A recap for anyone who might come across with a similar problem.
1. I installed a ROM using an older version of android onto a phone with the new bootloader (NE4), softbricking it.
2. I installed the stock ROM + root from this link using Clockworkmod
https://www.androidfilehost.com/?fid=23501681358550126
3. Installed the stock Recovery from this link and did wiped my data and both caches
https://www.androidfilehost.com/?fid=23681161096070493
4. I rebooted the phone and waited at the AT&T logo for a while, and it booted up normally!
5. I installed the most recent version of Philz Touch Recovery for the d2lte, made a nandroid for safety, and then install the latest nightly of CM11 for the d2lte.
6. It works!
Thanks again to Audit for helping me out!
Jemimacakes
I'm glad it all worked and I was able to help in some way.
It's great that you posted your solution in case it helps other people in a similar situation.
I think i'm in a similar place - a few questions. You used cwm to install the stock ROM? I thought you needed to use odin. Also, why did you need to install the stock recovery (and did you just flash the .zip in cwm)? Also, that stock rom you linked to is 4.4, right? Would that work if I was on 4.3?
Before flashing anything, I suggest you confirm your bootloader and modem. Flashing the wrong combination of modem and bootloader could hard brick your phone.
If your phone does not boot, try flashing Philz Touch for the d2lte and flash the latest cm11. Hoepfully, this will get your phone running so you can confirm the bootloader and modem. CM11 does not flash a modem or bootloader.
Hello everyone,
After a long fight to try and get this phone back to normal, everything seemed good,
except not really
I started on a buggy CM11 version. Sick of it, I downloaded a 4.4.4 stock rom. I had to disable firewall and defender, but I got Odin to flash my md5. I got through everything and it booted successfully. After signing in and all that jazz, I find out that my WiFi isn't working. After a few reboots, My 4G finally works and everything seems to be steady.
Then, after exploring the rest of the phone I find out that all my apps from last ROM are still there. I know that you are supposed to wipe before flashing, but I was told that Odin will take care of that. It obviously didn't.
After THAT, I try to boot into Recovery as the next sensible step is to try to wipe my data and cache. I turn the phone off and press (Vol up + Home + Pwr) and the first boot screen shows for a moment. It says in blue "RECOVERY BOOTING" in the corner. Right after, it disappears and in another second it does the same screen without the "RECOVERY BOOTING". And as presumed, it does a regular boot.
What did I miss? How can I wipe my phone from recovery? How can I fix my problem with Wifi?
Reflash in Odin.
Make sure you have the correct stock rom. If you flash the "md5" you may have flashed the wrong thing. The md5 is not tge firmware, that is just the code that verifies your firmware file is not corrupted.
If your old apps were still there, you flashed the wrong thing. There is no way to flash stock firmware in odin and not wipe the data partition.
You are correct then
Yeah, I flashed a tar.md5 in Odin. It gave me a new ROM but all my apps are there. After all that, I still can't go to recovery. I tried using the terminal and ROM Toolbox to go there, both didn't work. Can I just leave it as it is and find a way to recovery or is the only way to go to bootloader and flash a correct file to get to recovery?
Flash twrp and see if it will reboot into recovery, then factory reset and flash latest firmware with Odin right after. Odin will NOT wipe data. It has to be done manually
serio22 said:
Flash twrp and see if it will reboot into recovery, then factory reset and flash latest firmware with Odin right after. Odin will NOT wipe data. It has to be done manually
Click to expand...
Click to collapse
It depends on what you ate flashing.
If you are flashing a full stock factory image it will wipe user data. If you are just flashing a system partition it won't.
Essem G said:
Hello everyone,
After a long fight to try and get this phone back to normal, everything seemed good,
except not really
I started on a buggy CM11 version. Sick of it, I downloaded a 4.4.4 stock rom. I had to disable firewall and defender, but I got Odin to flash my md5. I got through everything and it booted successfully. After signing in and all that jazz, I find out that my WiFi isn't working. After a few reboots, My 4G finally works and everything seems to be steady.
Then, after exploring the rest of the phone I find out that all my apps from last ROM are still there. I know that you are supposed to wipe before flashing, but I was told that Odin will take care of that. It obviously didn't.
After THAT, I try to boot into Recovery as the next sensible step is to try to wipe my data and cache. I turn the phone off and press (Vol up + Home + Pwr) and the first boot screen shows for a moment. It says in blue "RECOVERY BOOTING" in the corner. Right after, it disappears and in another second it does the same screen without the "RECOVERY BOOTING". And as presumed, it does a regular boot.
What did I miss? How can I wipe my phone from recovery? How can I fix my problem with Wifi?
Click to expand...
Click to collapse
Fkash twrp and format system, data, cache and preload and install a deodexed stock os
g7755725 said:
Fkash twrp and format system, data, cache and preload and install a deodexed stock os
Click to expand...
Click to collapse
Also this. This gives you more control over the whole process
Skipjacks said:
Also this. This gives you more control over the whole process
Click to expand...
Click to collapse
How do I know whatever I download is deodexed? And I went to a page of ROMs someone gave me and I downloaded the NK2 version, which also gave me a tar.md5. If I want the correct thing to flash, what should I flash?
Essem G said:
How do I know whatever I download is deodexed? And I went to a page of ROMs someone gave me and I downloaded the NK2 version, which also gave me a tar.md5. If I want the correct thing to flash, what should I flash?
Click to expand...
Click to collapse
The first post of any customized stock rom will tell you if its deodexed. If it doesn't say it...its not.
@Essem G:
Any updates for us? I'm following this thread because I have similar problems with my WiFi not working after upgrading from 4.2.2.
Any luck getting TWRP flashed?
Also I believe that the stock firmwares do come as tar.md5's, as in the file: M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar.md5 from ShinySide's stock firmware thread.
As for the WiFi issue, from the hours of reading I've done it looks like this problem occurs when you upgrade your firmware, but it no longer matches the bootloader. Such as bootloader (Baseband) showing MDL, but Build Number showing NH7, NK2, etc. What does your show?
This thread may be of use to you when you get back to a working ROM. Good luck!
@RavenMind1
Everyone has been saying different answers and i've put off fixing my device for a while. I'm just afraid i'll brick it forever and have another nightmare after this current one. So no, there has been no progress. I think i'm gonna try to flash Philz and format my system, then flash a deodexed rom. @g7755725 said that you can flash TWRP, but I usually use Philz. It appears to be that I have lost root access because no root features work and SuperSU won't recognize it. Will everything work or am I setting my self up for disaster?
Edit: Where can I find a deodexed rom? I desperately need one, thanks
Essem G said:
@RavenMind1
Everyone has been saying different answers and i've put off fixing my device for a while. I'm just afraid i'll brick it forever and have another nightmare after this current one. So no, there has been no progress. I think i'm gonna try to flash Philz and format my system, then flash a deodexed rom. @g7755725 said that you can flash TWRP, but I usually use Philz. It appears to be that I have lost root access because no root features work and SuperSU won't recognize it. Will everything work or am I setting my self up for disaster?
Edit: Where can I find a deodexed rom? I desperately need one, thanks
Click to expand...
Click to collapse
Look in the forums for deodexed rom theirs a bunch and untouched as well i had philz but it eoukdnt boot my s4 so i had to switch to twrp because it does better then any recovery
g7755725 said:
Look in the forums for deodexed rom theirs a bunch and untouched as well i had philz but it eoukdnt boot my s4 so i had to switch to twrp because it does better then any recovery
Click to expand...
Click to collapse
Thanks for the support so far, but has this problem occured before? do you think the steps i've listed will solve this? Im just trying to make sure that I know exactly what to do before I go in. Thanks
Essem G said:
Thanks for the support so far, but has this problem occured before? do you think the steps i've listed will solve this? Im just trying to make sure that I know exactly what to do before I go in. Thanks[/Q] it should
Click to expand...
Click to collapse
@g7755725 I downloaded a deodexed rom from the SkipJacks guy (different page than what you sent me) and it's a little under 9MB... how could this possibly be a ROM?
Essem G said:
@g7755725 I downloaded a deodexed rom from the SkipJacks guy (different page than what you sent me) and it's a little under 9MB... how could this possibly be a ROM?
Click to expand...
Click to collapse
Have you tried my gamerrom Ultimate 1 its basically stock touchwiz of if Official NK2 M919UVUFNK2 with stweaks and no bloatware here is the thread gru 1 is in.the botyom of the thread http://forum.xda-developers.com/galaxy-s4-tmobile/development/stock-os-gamerrom-ultimate-2-touchwiz-t3078467
Sounds cool but i would have been interested a few months ago. I'm trying to sell the phone so I need to get it back to stock. Appreciate all the help and I think it's cool that you make ROMs
Essem G said:
Sounds cool but i would have been interested a few months ago. I'm trying to sell the phone so I need to get it back to stock. Appreciate all the help and I think it's cool that you make ROMs
Click to expand...
Click to collapse
If you're trying to go back to complete stock then just Odin NK2 firmware. http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508 I used the NK2 from here about 2 days ago to go back to stock.