[Q] N7100 is'nt recognized by windows 8.1.1 and does'nt go in recovery mode - Galaxy Note II Q&A, Help & Troubleshooting

Hi forum,
I'm actually in hospital for about 6 weeks and after flashing a custom Rom I want to go back to the previius issue but go back
my samsung n7100 is'nt recognized by windows 8.1 update 1 and doesn't go to recovery mode. I tried to deinstall USB-drivers and did a new Installation of the drivers, but nothing Helms.
I cannnot install any cwm-Rom.
Please help because my smarty is the only connection to my wife and children.
P.s.: sorry for my Bad English. and i wrote this thread in my sickbed.
Thanks a Lot for your patience..

Hubs135 said:
Hi forum,
I'm actually in hospital for about 6 weeks and after flashing a custom Rom I want to go back to the previius issue but go back
my samsung n7100 is'nt recognized by windows 8.1 update 1 and doesn't go to recovery mode. I tried to deinstall USB-drivers and did a new Installation of the drivers, but nothing Helms.
I cannnot install any cwm-Rom.
Please help because my smarty is the only connection to my wife and children.
P.s.: sorry for my Bad English. and i wrote this thread in my sickbed.
Thanks a Lot for your patience..
Click to expand...
Click to collapse
Uninstall the drivers again, then Try using USBDeview and delete all the devices related to android and samsung... this will remove the possibility of any device driver not being reinstalled properly by windows...
USBDeview 32-bit
USBDeview 64-bit
After this restart the pc and try installing drivers and connect the phone to see if it works...

U can try reinstalling samsung kies.
Sent from Samsung Note 2 on Phantom Kitkat Rom via Tapatalk

Windows 8.1 update 1 also can't flash anything to my phone because of drivers. I had tried every driver mtp, Sammy etc.
Here are the latest Sammy if you want to try.
http://forum.xda-developers.com/showthread.php?t=961956
Sent from my GT-N7100 using Tapatalk 2

Hubs135 said:
Please help because my smarty is the only connection to my wife and children.
Click to expand...
Click to collapse
What's the issue with your current rom? If it's working fine don't play with it, if it's not then maybe we can fix the issue.

im using windows 8.1. working & able to flash 4.4.2 with Odin 3.0.9
try install PdaNet & KIES 3

I tried all things you wrote but without any success. At least I did a new installstion of windows 8.1 but also without success. I think if its ossible for me to come into recovery mode I can Flash cwm Version of rom from my sd Card. It seems the onlyest Way to Repair my smarty.
Any tricks to get recovery mode.

Hubs135 said:
I tried all things you wrote but without any success. At least I did a new installstion of windows 8.1 but also without success. I think if its ossible for me to come into recovery mode I can Flash cwm Version of rom from my sd Card. It seems the onlyest Way to Repair my smarty.
Any tricks to get recovery mode.
Click to expand...
Click to collapse
http://stackoverflow.com/questions/21246905/cant-connect-android-device-to-pc-on-windows-8
you might need google help

Sorry, but tried all things you wrote, but without success. I googled too, but all threads say to do it. via Odin or similar but my opiniion the onlyest Way to rescue my smarty is getting in the recovery mode again.
Is there any tricky to do.this?

Bricked???
No tricks. It seems i've bricked my smarty

Nobody any Idea?
Really Nobody any Idea to recscue my smarty.
Then I've lost 336,00€,
**** ....

Hubs135 said:
Really Nobody any Idea to recscue my smarty.
Then I've lost 336,00€,
**** ....
Click to expand...
Click to collapse
Well, what's actually wrong with it, other than Win 8.1.1 not seeing it? You haven't told anyone what problems you're having other than that. It could be just something simple that someone here can help you with; that doesn't mean you have to reflash it...

Bricked - yes or no? - briefing my problem
Briefing my problem for better understanding my problem:
1. i wanted to do clean installation of sammobile rom 4.4.2 by preparing my n7100 before flashing new costum rom by deleting previous rom via a script.
2. after doing this my smartphone isn't recognized by windows 8.1 Update 1 - 64 bit
3. I tried also windows 8.1, 8 and 7 without any success.
4. i'm not be able to flash new custom rom via odin
5. on sd-card i had a cwm of rom and a backup of previous rom version, too
6. i tried to get into recovery mode by pushing sound+, on-switch and home by pushing at the same time
7. i got always immediately into download mode or in bootloop since boot sound starts (it's difficult to reconstruct the exactly way, but i had the problem not to go into recovery mode mot time before. therefore i do it always by "rom manager" appfrom chainfire).
8. i'm not be able to flash new custom rom via recovery mode
9. then i tried all tricks by searching the prroblem by google but all methods didn' work
10.. i'm be able to load my smartphone and the led lights, too.
this is why i think about my n7100 is bricked.
please, please help me!
thanks a lot

So you're bootlooping?
Your best bet is to try to access it from an older version of Windows. Probably you have a bad driver somewhere and it's causing conflicts. I have similar issues from W8, but it's fine on older OS's.
If an older version of Windows can access the device, then you should be able to reflash it. I suggest trying to drop Dr Ketan a PM, he's very knowledgeable and helpful.

see item 3, please.

im on windows 8.1
just download the lastest Samsung Kies (Samsung Kies 3) and install it.

try this
Hubs135 said:
Briefing my problem for better understanding my problem:
1. i wanted to do clean installation of sammobile rom 4.4.2 by preparing my n7100 before flashing new costum rom by deleting previous rom via a script.
2. after doing this my smartphone isn't recognized by windows 8.1 Update 1 - 64 bit
3. I tried also windows 8.1, 8 and 7 without any success.
4. i'm not be able to flash new custom rom via odin
5. on sd-card i had a cwm of rom and a backup of previous rom version, too
6. i tried to get into recovery mode by pushing sound+, on-switch and home by pushing at the same time
7. i got always immediately into download mode or in bootloop since boot sound starts (it's difficult to reconstruct the exactly way, but i had the problem not to go into recovery mode mot time before. therefore i do it always by "rom manager" appfrom chainfire).
8. i'm not be able to flash new custom rom via recovery mode
9. then i tried all tricks by searching the prroblem by google but all methods didn' work
10.. i'm be able to load my smartphone and the led lights, too.
this is why i think about my n7100 is bricked.
please, please help me!
thanks a lot
Click to expand...
Click to collapse
may be your phone has lost root access,try connecting it to kies and use the phone recovery guide if connecting your phone to pc is problem try other usb cables try the thicker shorter ones..

SOLVED !!!
:laugh::good: dr.Kretan was right.. After coming home from hospital i was able to connect my smarty to my home pc and flash kitkat 4.4.2 (france edition by sammobile) via odin.
1000 thanks to all of you for helping to solve my problem :good::good::good:
but one question is open: it's still impossible for me to get into recovery mode i don't understand tihs.any idea?

Related

[Q] Help with flashing rom!!!

Hi guys. Im a noob, first post here and need some help. Be searching all day for how to load a stock rom to my device GT-N5110.
Heres the low down.
Purchased in Australia. No samsung updates applied.
Successfully rooted with framaroot.Was running framaroot for more than a month
Install busy box today in normal mode I think. I chose the safe option.
Edited build.prop product model so I could install Navigon
Navigon working fine
Now..........
Unable to change the product name back using es explorer or file expert.
Thought it would change after restart but device entered bootloop. I think busybox was the culprit. Should have looked up what its all about.
Discovered recovery mode and did factory data reset. Can access odin screen on device too.
Device boots but hangs on language selection screen
I have found and downloaded stock rom for it that I found here somehow
I tried "Mrjraider" tutorial "how to flash back to a stock rom"
but odin crashes whenever I load the rom file and it wont recognize my GN8.0
Computer runs on windows 8. Kies is up to date too. Kies reconizes device but is unable to update or anything
Was running odin 4.43 with AriesVE.ops in compatabillity win xp sp3 with administrator .
can try on a win7 computer tomorrow.
This is the name of the file its about 1.2 Gb....... N5110UEDMD1_N5110XARDMD1_HOME.tar.md5 do I need to rename this or something
There was also a .dll that was in the package, whats with that?????
be looking through this forum all day and night and cant quite find what im looking for. If what I seek is here please point me to it. Or if any one here in Brisbane, can fix it for me,What are your thoghts? PM me.
Just want my baby back working again.
when it comes to phones, Kies and Odin never play nice together, so it may be the same with these things..
get kies completely off your computer, and your tablet, reboot, and try Odin again...also try a different cable and a different USB port if at first it doesnt work properly..
will give it a bash. cheers

[Q] Bricked the device, can't boot up or get into recovery, ODIN not working...

Hi,
I tried to install CM11 on my Galaxy Gio, but I ran into several problems.
First I managed to flash CM11 from an old clockwork mod version.
However the system did not boot up correctly, so I tried to use a newer
recovery version. That failed as well and now I am stuck without a working recovery.
The device won't get past the Samsung logo upon normal boot. When I enter
the download mode, the screen looks different than any screenshot I have found
so far. Most people say you get a warning, that download mode is dangerous, etc.
but my device just says "Downloading..." in a yellow font. Windows won't discover
it at all, even with installed Samsung drivers and on Linux I was able to detect it
using Heimdall, but flashing it failed with the error "Failed to initialize protocol".
Does anyone have any idea what I could try to do next? I'm getting pretty desperate
right now...
Thanks in advance
Chris
If it says just "Downloading..." when you enter in download mode, it's perfectly OK!!!
Steps to bring your phone back to life:
1) Enter Download Mode
2) Connect Phone to PC through USB Cable (though it's the only way, now)
3) Download a Stock ROM
4) Open ODIN, wait it to detect your phone, select the stock rom's archive, select the OPS required
5) Flash it and wait
I can provide you any files you need and even TeamViewer support, just tell me!
P.S.: I have revived my phone about 10 times so far because I've tested almost every ROM for our Gio!
3) Download a Stock ROM
Click to expand...
Click to collapse
4) Open ODIN, wait it to detect your phone, select the stock rom's archive, select the OPS required
Click to expand...
Click to collapse
My Problem so far is that ODIN won't recognize my phone. I think it is a problem with Windows 8, it says the driver doesn't exist. I tried installing the Samsung driver package but even then, the phone is just recognized as "Unknown Device". The Samsung package contains about 20 folders, so I didn't know which driver to force install.
I can provide you any files you need and even TeamViewer support, just tell me!
Click to expand...
Click to collapse
That would be really nice, if I can't fix it myself. Can you tell me in which timezone you live, so I can plan accordingly?
Many thanks
Chris
FauserneEist said:
My Problem so far is that ODIN won't recognize my phone. I think it is a problem with Windows 8, it says the driver doesn't exist. I tried installing the Samsung driver package but even then, the phone is just recognized as "Unknown Device". The Samsung package contains about 20 folders, so I didn't know which driver to force install.
That would be really nice, if I can't fix it myself. Can you tell me in which timezone you live, so I can plan accordingly?
Many thanks
Chris
Click to expand...
Click to collapse
Well, i can provide teamviewer support too as i have done it on windows 8 myself, My Timezone is GMT + 5.00
I have been able to repair the device by myself. I used an old Windows XP machine and did exactly what I did on my Windows 8 machine. Worked like a charm... At this point I have to assume that Odin does not play well on 64 bit machines...
same
Hi
My phone have the same problem
It just get into download mode
When I try via Odin
it detects and pass
But in Comments After reboot message Write kill time... error.
and don't boot up.
Please put the your stuck Rom and Cwm Links.
moosavi12 said:
Hi
My phone have the same problem
It just get into download mode
When I try via Odin
it detects and pass
But in Comments After reboot message Write kill time... error.
and don't boot up.
Please put the your stuck Rom and Cwm Links.
Click to expand...
Click to collapse
what ODIN Version are you using?
waqaswasil said:
what ODIN Version are you using?
Click to expand...
Click to collapse
4.42
and tried by 3 versions, But not effective.
moosavi12 said:
4.42
and tried by 3 versions, But not effective.
Click to expand...
Click to collapse
keep in mind that you have to "wipe data/factory reset" from stock recovery first time after flashing stock ROM with odin otherwise it will not boot up!
FauserneEist said:
Hi,
I tried to install CM11 on my Galaxy Gio, but I ran into several problems.
First I managed to flash CM11 from an old clockwork mod version.
However the system did not boot up correctly, so I tried to use a newer
recovery version. That failed as well and now I am stuck without a working recovery.
The device won't get past the Samsung logo upon normal boot. When I enter
the download mode, the screen looks different than any screenshot I have found
so far. Most people say you get a warning, that download mode is dangerous, etc.
but my device just says "Downloading..." in a yellow font. Windows won't discover
it at all, even with installed Samsung drivers and on Linux I was able to detect it
using Heimdall, but flashing it failed with the error "Failed to initialize protocol".
Does anyone have any idea what I could try to do next? I'm getting pretty desperate
right now...
Thanks in advance
Chris
Click to expand...
Click to collapse
Did you set USB Debugging to be on? http://forum.xda-developers.com/showthread.php?t=961956
try this
http://forum.xda-developers.com/showthread.php?t=1573628
ODIN Multi Downloader 4.42:http://www.samsungupdate.com/android...for-your-phone
Download GIO_v1.0,ops:http://HERE
FauserneEist said:
Hi,
I tried to install CM11 on my Galaxy Gio, but I ran into several problems.
First I managed to flash CM11 from an old clockwork mod version.
However the system did not boot up correctly, so I tried to use a newer
recovery version. That failed as well and now I am stuck without a working recovery.
Thanks in advance
Chris
Click to expand...
Click to collapse
Try this ROM_ http://forum.xda-developers.com/showthread.php?t=2715301
Gio_Gapps-KK-4.4.0-Signed.zip_http://d-h.st/Uts
install this mod_http://forum.xda-developers.com/gala...ition-t2360985
sorry but my english is bad
I'm GMT +3 (Bucharest). If you want me to make your phone running at its possibly best then give me a private message and I'll help you with everything you need.

[q] i really need help

I have the TMO Note 2
as of yesterday I don't know whats wrong
I can still access TWRP recovery & download mode(9counts)
my note has never been connected to this compter therefore I don't have the drivers
and they won't install ..
any suggestions ????!
SOMEONE PLEASE HELP !!!
i'd recommend going to samsungs site and d/ling kies3. it will install latest drivers for your phone on your computer. and if that doesn't work. try a dif computer
amaripierre said:
I have the TMO Note 2
as of yesterday I don't know whats wrong
I can still access TWRP recovery & download mode(9counts)
my note has never been connected to this compter therefore I don't have the drivers
and they won't install ..
any suggestions ????!
SOMEONE PLEASE HELP !!!
Click to expand...
Click to collapse
First this is not the help area. Second this has been told over and over.
1 get usbdview application for windows
2 download the Latest samsung kies
3 unplug all usb devices from your computer and reboot
4 Run usbdview and delete all entries
5 install Kies
6 plug in your phone and the drivers will be INstalled
7 put your phone back to stock because you should Never flash if you don't know your way back.
The above information is very General as to the fact you give absolutely NO Description of what happened and how you got to where you are now...
??!! Error
erica_renee said:
First this is not the help area. Second this has been told over and over.
1 get usbdview application for windows
2 download the Latest samsung kies
3 unplug all usb devices from your computer and reboot
4 Run usbdview and delete all entries
5 install Kies
6 plug in your phone and the drivers will be INstalled
7 put your phone back to stock because you should Never flash if you don't know your way back.
The above information is very General as to the fact you give absolutely NO Description of what happened and how you got to where you are now...
Click to expand...
Click to collapse
well, I was updating / switching roms and I was factory resetting
and im assuming I wiped the system as well, I have the OMNI rom still on my
memory card but it will no install again. I keep getting an error "E: Error executing updater binary in zip '/sdcard Error flashing zip '/sdcard/Omni-4.4.2-20140430"
amaripierre said:
well, I was updating / switching roms and I was factory resetting
and im assuming I wiped the system as well, I have the OMNI rom still on my
memory card but it will no install again. I keep getting an error "E: Error executing updater binary in zip '/sdcard Error flashing zip '/sdcard/Omni-4.4.2-20140430"
Click to expand...
Click to collapse
So did you get ODIN TO WORK (PHONE recognized properly on the computer)
If so look in sammobile for the latest stock full rom for your phone and flash that with odin
Search this forum for how to use odin to flash stock rom.
But you still kinda have me confused

Note 2 OS not installed error

Hi, I'm trying to erase my old note ll to pass it along to a friend who's in need of an upgrade but have a problem, turn it on and it just forever stays stuck in the note 2. Have twrp 2.8.1.0 on it and when I tried to do a wipe of any kind or factory reset, I get fails of it being able to mount anything, tried doing a kies emergency firmware recovery and doesn't detect the phone, tried though Skipsoft unifide toolkit and same, cant get it to detect the phone to redo it. Tried though twrp with a rom but it can't see the 16gb card at all. Any help with possibly getting to work would be greatly appriciated, thanks!
So any updates if anyone might possibly know?
there are several solutions.
1.use odin to install a rom.
2.reinstall the recovery. i think there is something wrong with it.
952599993 said:
there are several solutions.
1.use odin to install a rom.
2.reinstall the recovery. i think there is something wrong with it.
Click to expand...
Click to collapse
Hard to use odin when it wont pick the phone up or windows wont pick it up so I can do anything to it via odin or twrp wont see a micro sd card so kinda screwed to do such sadly :/

Erase some apk with adb and stuck on reboot

Hi! I hope some one knows how to restore apk on a Galaxy S9 plus
I was trying to get rid of Bixby and erase some apks using adb app control, I have a backup of the apks in the computer, the problem right now it's that the phone has many photos and most of them are important , I would like to know if there is a way to avoid wipe data/ factory reset, via adb or Odin.
I'm stuck on loop after the operator logo.
It doesn't boot in safe mode.
I already have android 10 ROM but I'm afraid that if I flash it with Odin , it will wipe the user data, if there is way to Just update, or restore this files please let me know.
Thank you very much for you help.
dr.rokr said:
Hi! I hope some one knows how to restore apk on a Galaxy S9 plus
I was trying to get rid of Bixby and erase some apks using adb app control, I have a backup of the apks in the computer, the problem right now it's that the phone has many photos and most of them are important , I would like to know if there is a way to avoid wipe data/ factory reset, via adb or Odin.
I'm stuck on loop after the operator logo.
It doesn't boot in safe mode.
I already have android 10 ROM but I'm afraid that if I flash it with Odin , it will wipe the user data, if there is way to Just update, or restore this files please let me know.
Thank you
Click to expand...
Click to collapse
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.
TormentedHeart said:
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.
Click to expand...
Click to collapse
Hi! I have tried several times, and I get failure to start, the phone is detected but the flash doesn't initiate, sometimes I get this screen, sometimes it says fail .
I have installed Samsung USB drivers, from the
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
And Odin from here
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
I used the original Samsung USB cable and tried the 3 USB ports in the laptop
What else can be happening?
Thank you very much!
dr.rokr said:
Hi! I have tried several times, and I get failure to start, the phone is detected but the flash doesn't initiate, sometimes I get this screen, sometimes it says fail .
I have installed Samsung USB drivers, from the
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
And Odin from here
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
I used the original Samsung USB cable and tryed the 3 USB ports in the laptop
What else can be happening?
Thank you very much!
Click to expand...
Click to collapse
did you try booting into the download mode twice?
Once and then again and then start the odin.
I had to do that.
I had to flash the official firmware myself because my phone keeps crashing on the homescreen.
Didnt solve it but I did flash it properly.
bruno2030 said:
did you try booting into the download mode twice?
Once and then again and then start the odin.
I had to do that.
I had to flash the official firmware myself because my phone keeps crashing on the homescreen.
Didnt solve it but I did flash it properly.
Click to expand...
Click to collapse
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do
dr.rokr said:
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do
Click to expand...
Click to collapse
go to the recovery.
connect to the PC.
open odin.
click on "reboot to bootloader"
It should go to to download mode.
what does your download mode screen say?
When I was doing this process I tried reflashing the latest rom but that didn't solve my boot loop issue.
So I flashed an older version of the rom.
Make sure the version you download is compatible with your phone.
You have G9650ZHU9FUG2 so only roms with 9 will work.
I flashed that old version and it didn't work, phone still stuck.
Then I flashed the latest one again and then my phone worked.
I used odin from the link you posted.
Odin3 v3.13.1
actually what i would suggest is downloading/re-downloading samsung usb drivers. otherwise most phones won't respond to odin even in download mode without it
dr.rokr said:
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do
Click to expand...
Click to collapse
TormentedHeart said:
actually what i would suggest is downloading/re-downloading samsung usb drivers. otherwise most phones won't respond to odin even in download mode without it
Click to expand...
Click to collapse
Hi! I have uninstalled everything and then install the drivers again without luck
TormentedHeart said:
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.
Click to expand...
Click to collapse
Hi! Today I have successfully flashed the exact firmware that the phone had ( there is no newer) using a different laptop (it's true if the problem persist with Odin, use another laptop)
I got success message, at the very first time, and when the phone reboot, nothing , stuck as it was before, so I erased cache partition and no luck, still stuck on reboot, I have also tried repair apps , and reboot sistem now, what else should I do?
Thank you very much!
Hi! I want the community to know that using the APK adb app for Samsung it's a bad idea, after successfuly flashing the firmware and performing a factory reset several times the phone remain stucked, I downloaded about 10 different firmwares and flash them all times without an error, and the phone was bricked and stuck in boot. So I took it to the official service and nothing, still the same, then I found an external service that flash the device with a little box that they said they paid in advance for credits for using that box, it took them one full week to revive the phone, also they had to flash it several times. In conclusion, if you buy Samsung, stick with the garbage apps the throw, if you mess with the system in some way as the official technician said, the phone will be nearly unrecoverable for privacy benefits for the user. Thank you very much for the help to the community!

Categories

Resources