Hi everybody
I have a problem with my optimus g.
I try with win 8 and win 7 to flash a file with kdz because my phone is formatted and consequently, it has any OS.
My phone is not recognized by the pc. I have installed all the driver (adb, sdk, LG drivers..)
Is my phone dead ?
Remember to connect it in download mode ?
press volume up and down and hold them while you connect phone to usb
android_user10 said:
Hi everybody
I have a problem with my optimus g.
I try with win 8 and win 7 to flash a file with kdz because my phone is formatted and consequently, it has any OS.
My phone is not recognized by the pc. I have installed all the driver (adb, sdk, LG drivers..)
Is my phone dead ?
Click to expand...
Click to collapse
Yes I know, but when I launch the process. It finish and I have an error
WParam = 100
LParam = 72
What is it ?
android_user10 said:
Hi everybody
I have a problem with my optimus g.
I try with win 8 and win 7 to flash a file with kdz because my phone is formatted and consequently, it has any OS.
My phone is not recognized by the pc. I have installed all the driver (adb, sdk, LG drivers..)
Is my phone dead ?
Click to expand...
Click to collapse
What do you mean it has any os? Does it boot? What do you see under about phone? What model number?
Related
hi guys, you are my last chance , i have an optimus g (e975) and i flashed artmod v5 all good ,but there was a bug in the rom forceclosing all apps , so i went in recovery and tried to reflash again the fact is that later i formatted system and data so now is like having 0 stuff in my phone not even android ,i'm not new to this kind of stuff ,i don't know what i was thinking , now i can go in download and recovery mode just fine but the problem is that my pc doesent recognize the device , i tried different cables and a pc with win xp on it i have windows 7 , i tried flashink kdz but obiously it doesent find my phone and also pushing via adb is useless since it doesent find the phone anyway, do you have any ideas for what i should do ?
costa2121 said:
hi guys, you are my last chance , i have an optimus g (e975) and i flashed artmod v5 all good ,but there was a bug in the rom forceclosing all apps , so i went in recovery and tried to reflash again the fact is that later i formatted system and data so now is like having 0 stuff in my phone not even android ,i'm not new to this kind of stuff ,i don't know what i was thinking , now i can go in download and recovery mode just fine but the problem is that my pc doesent recognize the device , i tried different cables and a pc with win xp on it i have windows 7 , i tried flashink kdz but obiously it doesent find my phone and also pushing via adb is useless since it doesent find the phone anyway, do you have any ideas for what i should do ?
Click to expand...
Click to collapse
It is only soft brick. You should try to install latest LG usb driver (should remove old driver first). Then boot to Download mode and see if your computer can detect your phone. If not success try difference usb port.
artit said:
It is only soft brick. You should try to install latest LG usb driver (should remove old driver first). Then boot to Download mode and see if your computer can detect your phone. If not success try difference usb port.
Click to expand...
Click to collapse
thank you for your help but I alread tried sometimes my phone is detected as "unknown device" but doesent work , i tried all the ports and downloaded the lg driver from their website i don't know what to do :I
Hey
I wanted to install Lollipop on my D855 using KDZ file so I proceed using instructions:
1. Install LG drivers
2. Enter download mode on the phone
At step 2 Windows detects new device and starts to install drivers.
For some reason it fails to install LG MTP driver. In the error I see "Device could not be started (Code 10)"
I tried this on:
my laptop (english Windows 7 x64)
desktop (polish Windows 7 x64)
virtualbox (windows 8.1 x64)
All with the same result. Could not install the driver
Is this normal and I should just proceed with LG Flash Tool 2014 or something is definitely wrong?
Bartek
Try to download the latest driver.
This one worked for me https://mega.co.nz/#!fR4QWApA!OMCuZzz9ZpBoHxOcxjDM49hL11iVHjYW-b2ttdH1c9w
i get the same stupid bull**** on XP and 7, can't win for losing seeing how i softbricked my lg g3.
Wow 3500 people have viewed ur thread yet only 3 replies how selfish this world is...
Simple solution go to device manager uninstall all the lg drivers reinstall all them again make sure ur screen is on when it ask to connect to pc select yes a drive will be shown on ur pc named g3
Hello.
I'm trying to unlock the phones bootloader (I have the H815 EUR version).
The problem is that after I boot into recovery both my PC's don't recognize the fastboot driver (Windows 8 and Windows 7), both are showing the device only as "Android".
I installed the LG drivers "LGUnitedMobileDriver_S52MAN314AP22_ML_WHQL_Ver_3.14.1".
Any ideas?
Thanks in advance
twinkle2K said:
Hello.
I'm trying to unlock the phones bootloader (I have the H815 EUR version).
The problem is that after I boot into recovery both my PC's don't recognize the fastboot driver (Windows 8 and Windows 7), both are showing the device only as "Android".
I installed the LG drivers "LGUnitedMobileDriver_S52MAN314AP22_ML_WHQL_Ver_3.14.1".
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
Did you ever get help with this or figure it out?
My LG G3 is not getting LGE Android MTP device driver has yellow mark on it in device manager ( win 7 x64 ). I have successfully flashed it once and it was working. I didn't close the LG Flash Tool and it started firmware upgrade again and failed at the point where it restarts the phone. I tried on my PCs at work /home and got the same result ( yellow mark on LGE Android MTP Device ).... LG Flashtool keep failing..... to download after 6%... it is now something to do with my phone cache???? wipe cache partition ??? Plz help!!!!!
apur32 said:
My LG G3 is not getting LGE Android MTP device driver has yellow mark on it in device manager ( win 7 x64 ). I have successfully flashed it once and it was working. I didn't close the LG Flash Tool and it started firmware upgrade again and failed at the point where it restarts the phone. I tried on my PCs at work /home and got the same result ( yellow mark on LGE Android MTP Device ).... LG Flashtool keep failing..... to download after 6%... it is now something to do with my phone cache???? wipe cache partition ??? Plz help!!!!!
Click to expand...
Click to collapse
if you are unable to flash with lg flashtool try lg up tool it works even when you want to downgrade from mm to lp
ranjith07 said:
if you are unable to flash with lg flashtool try lg up tool it works even when you want to downgrade from mm to lp
Click to expand...
Click to collapse
Thank you very much for the response. What is LG UP Tool? Sorry I am new to this flash business.......
I am also getting something like this under device manager RELINK HS-USB QLoader 9008 (COM5) and screen stays blank.....
Any idea?
apur32 said:
Thank you very much for the response. What is LG UP Tool? Sorry I am new to this flash business.......
I am also getting something like this under device manager RELINK HS-USB QLoader 9008 (COM5) and screen stays blank.....
Any idea?
Click to expand...
Click to collapse
re-install latest lg drivers and check out this post you will get an idea about lg up tool http://forum.xda-developers.com/lg-g3/help/downgrade-mm-to-lp-using-lg-t3283912 and hit thanks if i had helped you
Hi
LG G3 D855 OS Android 5 V21c-TWN-xx
I am trying to upgrade to MM via the subject Flash Tool but it gets as far as 15% and then a Window pops up telling me
that the Phone has been disconnected and to reconnect and retry.
The phone is still connected and showing as such in explorer. I re-installed the drivers and still the same problem.
Tried compatibility mode Win 8 and the same thing happens. Anyone have this problem in Win 10 or know of a way round it.
I also have a WIn 8.1 Laptop which I used to update to the current OS with Flash Tool 2014 but it is now stopping and giving an error
"This programme has stopped working MS is checking Blah Blah"
Stransky
Having the same issue here with D852
Reinstall G3 usb drivers
hi, have you tried LGUP method? http://forum.xda-developers.com/showpost.php?p=64624353&postcount=3
I used windows 7 and usb 2 ports.
twisted_twice said:
hi, have you tried LGUP method? http://forum.xda-developers.com/showpost.php?p=64624353&postcount=3
I used windows 7 and usb 2 ports.
Click to expand...
Click to collapse
LG Up shows phone as "unknown" no matter what I do.
I also have a G Flex 2 and this shows up ok in LG Up.
Sent from my iPad using Tapatalk
I downgraded from MM to LP two days ago. I had the little window saying "unknown "
The problem was that windows wasn't seeing my phone. I unplug the cable and plug it back and it worked. As I wrote before I am using windows 7.
Hi
Managed to get LG Tool 2014 to work and D855 now on v30b (MM) global.xx. Problem was driver related. I downloaded Win 10 G3 specific driver from LG site and everything then worked.
good to know pal.
i have lg g2 mini
the keyboard dos not start and my phone has number password
what can i do to restor my phone?
it is not root
I have windows 10 pro and i get same problem, i have solved this with driver usb install (sorry for my poor english)
Found my old LG-VS450PP Optimus Exceed 2 for Verizon. It was working fine when put away.
Charged the battery on a working phone (same model) but this recently resurrected phone will not boot up. Same results using vol+ / power or just power button regardless of sequencing battery out/usb cord in or out.
Gives error "boot certification verify" and then shuts down. Back light remains lit.
I can get it to open into another screen (Vol- / power) that offers four options: continue reboot, factory data reset, wipe cache, safe mode boot. Selecting any of those options results in the unit shutting down.
Vol+ plus power do not open Download window.
While it fails to boot, I can still see two folders on my Win 7 PC: image and verinfo. Image contains numerous files . So the phone IS connected to the PC but there appears to be something else that fails to initiate "connection" as far as the LG Flash tool 2014 is concerned. Any suggestions welcome.
Thinking of last resorts, I read somewhere of shorting a test point on the board but can't find directions for this model.
This web site is goog and helpfull for me.
LG Flash Tool
<strong>LG Flash Tool</strong> is the best KDZ Flash software for all kind of LG Android devices or Windows. The new version of the LG flash tool can be <strong>Downloaded</strong> here.
www.lgflashtool.com