PREAMBLE
I have built CWM for our Lenovo A3000-H - tested it as well, everything (apart from the bugs mentioned below) seems to work. This is not a "port", it has been compiled from source.
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version with 3G) with the a3000_prc_3gfull board/partition table. It may or may not work on others.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery image
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
DOWNLOAD
DevDB
CHANGELOG
Device-specific:
Commits - lenovo-a3-dev/device_lenovo_a3
Code:
[B][U]20/12/2014:[/U][/B]
[LIST]
[*]Fixed some minor issues
[*]Fixed USB PC Mass storage[/list]
[B][U]30/11/2014:[/U][/B]
[LIST]
[*]Updated CWM to 6.0.5.1[/list]
[B][U]10/06/2014:[/U][/B]
[LIST]
[*]Updated CWM to 6.0.4.9
[*]Fixed external sdcard - you can now install ROMs/MODs from both the internal OR the external sdcard!
[*]Imported some build props from Stock ROM
[/LIST]
CWM:
Commits - CyanogenMod/android_bootable_recovery
CREDITs
Koush and the CyanogenMod team
XDA:DevDB Information
ClockworkMod Recovery for the Lenovo A3000-H, Tool/Utility for the Lenovo A3000
Contributors
Olivier
Source Code: https://github.com/CyanogenMod/android_bootable_recovery
Version Information
Status: Stable
Stable Release Date: 2014-11-30
Created 2014-05-18
Last Updated 2015-09-26
Awesome
GJ bro
Cheers
Successfully flashed this recovery to mine A3000-H 4gb 3G tablet.
I tried backing up my ROM, but it froze while "Backing up boot image". Have not tried anything else.
MirXas said:
Successfully flashed this recovery to mine A3000-H 4gb 3G tablet.
I tried backing up my ROM, but it froze while "Backing up boot image". Have not tried anything else.
Click to expand...
Click to collapse
And you couldn't grab a log afterwards?
Try
Code:
adb pull tmp/recovery.log
and upload the log please.
Gesendet von meinem Xperia S mit Tapatalk
Olivier said:
And you couldn't grab a log afterwards?
Try
Code:
adb pull tmp/recovery.log
and upload the log please.
Gesendet von meinem Xperia S mit Tapatalk
Click to expand...
Click to collapse
Strangely, I have'nt thought of that. I'll give you a log tomorrow. Going to bed now. It's pretty late in my country
thank u 4 your work！and why not transplant twrp which i got used to
Hi Olivier
Could you please tell me how to flash the img file?
Cheers
droople said:
Hi Olivier
Could you please tell me how to flash the img file?
Cheers
Click to expand...
Click to collapse
If you already have ROM package (including flash tool) from one of "Azam426" threads, it's simple:
1. Just open "Flash_tool"
2. Tick "DA DL All with check sum"
3. Load "scatter-loader" file and point to "MT6589_Android_scatter_emmc.txt".
4. Uncheck everything except for "RECOVERY"
5. Click the "RECOVERY" title and point that to "recovery.img" file downloaded from this thread.
6. Switch off the tablet, prepare the USB cable, and click "DOWNLOAD"
7. Wait a few seconds, then connect the cable to the tab.
8. In case if you get any error messages when you click "DOWNLOAD", unplug the cable then click "FIRMWARE->UPGRADE" option, wait a few seconds and reconnect the cable to the tab.
Please note, I'm not responsible if your tab got bricked, burned, exploded, loosing some or all of your data, etc.
Although flashing this recovery doesn't do any harm (on my device), but just to be safe, please do backup your important files, PIMs, emails, etc.
Keys assignment:
- Vol up = Up
- Vol down = Down
- Pwr button = Select
=> In case you're wondering how to enter recovery, just turn off your device, press and hold vol up + power button until you have this screen:
A new build is up, some storage issues have been fixed up. Updated the OP.
I did all steps, unchecked everything (PRELOADER become RED) and loaded recovery.img and click download but it ask if I want to downloading anyway ?! because all images are not correctly loaded. I said YES, and it said Image RECOVERY checksum failed !
what did I wrong ?!
Shadow_Nexus said:
If you already have ROM package (including flash tool) from one of "Azam426" threads, it's simple:
1. Just open "Flash_tool"
2. Tick "DA DL All with check sum"
3. Load "scatter-loader" file and point to "MT6589_Android_scatter_emmc.txt".
4. Uncheck everything except for "RECOVERY"
5. Click the "RECOVERY" title and point that to "recovery.img" file downloaded from this thread.
6. Switch off the tablet, prepare the USB cable, and click "DOWNLOAD"
7. Wait a few seconds, then connect the cable to the tab.
8. In case if you get any error messages when you click "DOWNLOAD", unplug the cable then click "FIRMWARE->UPGRADE" option, wait a few seconds and reconnect the cable to the tab.
Please note, I'm not responsible if your tab got bricked, burned, exploded, loosing some or all of your data, etc.
Although flashing this recovery doesn't do any harm (on my device), but just to be safe, please do backup your important files, PIMs, emails, etc.
Keys assignment:
- Vol up = Up
- Vol down = Down
- Pwr button = Select
=> In case you're wondering how to enter recovery, just turn off your device, press and hold vol up + power button until you have this screen:
Click to expand...
Click to collapse
Thank you so much
I Don't Have PC or laptop
Shadow_Nexus said:
If you already have ROM package (including flash tool) from one of "Azam426" threads, it's simple:
1. Just open "Flash_tool"
2. Tick "DA DL All with check sum"
3. Load "scatter-loader" file and point to "MT6589_Android_scatter_emmc.txt".
4. Uncheck everything except for "RECOVERY"
5. Click the "RECOVERY" title and point that to "recovery.img" file downloaded from this thread.
6. Switch off the tablet, prepare the USB cable, and click "DOWNLOAD"
7. Wait a few seconds, then connect the cable to the tab.
8. In case if you get any error messages when you click "DOWNLOAD", unplug the cable then click "FIRMWARE->UPGRADE" option, wait a few seconds and reconnect the cable to the tab.
Please note, I'm not responsible if your tab got bricked, burned, exploded, loosing some or all of your data, etc.
Although flashing this recovery doesn't do any harm (on my device), but just to be safe, please do backup your important files, PIMs, emails, etc.
Keys assignment:
- Vol up = Up
- Vol down = Down
- Pwr button = Select
=> In case you're wondering how to enter recovery, just turn off your device, press and hold vol up + power button until you have this screen:
Click to expand...
Click to collapse
Do you know any method without PC? :-'(
Will this work on the f version of the tablet? (The wifi-only one)
Have tested on the A3000-F, and I want to confirm that it works.
PJMOR said:
Have tested on the A3000-F, and I want to confirm that it works.
Click to expand...
Click to collapse
Thanks for the confirmation.
CWM v6.0.5.1 is up! This time, I have uploaded a flashable ZIP so you can easily upgrade using an existing recovery. If you want to flash it as before then just extract the recovery.img from the ZIP file and flash it however you want to flash it.
Thank you sir...
I have tested this recovery on my Lenovo A3000-H and there is no bug in PC USB mass storage...
I don't know how but this is true..
My build number A3000_A422_013_026_140926_WW_CALL_FUSE
Another build is up, CWM is now intended to work with a3000_prc_3gfull devices.
Olivier said:
Another build is up, CWM is now intended to work with a3000_prc_3gfull devices.
Click to expand...
Click to collapse
Thank you Sir...
I will test the new build
Sir The download link is not working it says error 404 not found
Related
First off, let me say that I did not develop this stuff and all thanks should go to those that did. Special thanks to noobnl, mskip and TeamEpic for all their work.
So here we go.
General Disclaimer:
Use these tools and this guide at your own risk. Doing these things wrong/improperly/etc. has the ability to completely ruin your device and YOU assume all risk and responsibility if that happens.
Also note that Rooting WILL violate the manufacturers warranty on the device making it ineligible for warranty repair. If you have insurance on the device however they MAY still replace it for the cost of your deductible.
Root Method Starts Here.
1. Download and install the Samsung USB drivers from Samsung's website
2. Turn on Debugging on your Phone
* Open Settings
* Select "Developer options" in the System section
* Check the box for "USB Debugging"
3. Plug you phone up to your computer using the USB cable and allow the drivers to install.
4. Download CMW_SuperUser_v3.07.zip from the bottom of this post
* I recommend making yourself a nice little GS3 folder in your downloads folder for all this stuff so it's easy to find
* DO NOT UNZIP!!
5. Copy CMW_SuperUser_v3.07.zip on to the Root of your GS3s INTERNAL storage (if you put it into a folder, you may have a hard time finding it later, but that's on you).
* DO NOT UNZIP!!
6. Unplug you phone
7. Power off your phone
^^ once u have now odin time......
1. Download Odin3-v3.04 from the bottom of this post
2. Extract Odin3-v3.04 into it's own folder somewhere where you can easily find it.
3. Download fixboot.tar from the bottom of this post to somewhere you can easily find it.
4. Reboot your phone into download mode
* Hold down Volume Down, Home and then power until Warning!! message is displayed
* Press Volume Up to continue.
5. Your phone should now be in download mode and displaying a green Android and say Downloading. If it is not, power off your phone by holding down the power button and then try to get into Download mode again. Do NOT progress until you have done so.
6. Go into the folder you extracted Odin3 into and run Odin3 v3.04.exe
7. Connect your phone to your computer via USB
8. In Odin, the COM box all the way to the left should turn blue and it should say Added!! in the Message area.
** Click on PDA and in the Open window that pops up navigate to and open the Tar With CWM from below file you downloaded earlier
** Verify that Auto Reboot and F. Reset Time are checked
** Click Start. Once the process is completed you device should automatically reboot and there will be a green PASS! box in the upper left of the window. You can then close Odin.
** Power off your device and boot into Recovery mode
* To boot into Recovery mode: Hold down Volume Up, Home and then the Power button until you are in Recovery (it should say CWM-based Recovery at the top of the screen)
**. Install CMW_SuperUser_v3.07.zip that you copied onto your internal memory
* Navigating ClockWorkMod Recovery: Use the Volume Up and Down arrow keys to change the highlighted option and the home key to select an option. The Back softkey works, but will not be lit and will take you back one screen.
Installing a zip:
* Select "Install zip from sdcard" (Yes, I know it's on the internal storage.)
* Select "Choose zip from sdcard"
* Select the zip you want to install; in this case CWM_SuperUser_v3.0.7.zip
* Select "Yes" to begin installing
**. Once the process has completed use the Back arrow to get back to the main recovery screen (remember, it works, but it's not lit) and select "reboot system now." Once your device boots up you should now be 'Rooted,' but there's still a few more things to be done
Reset counter: triangle away from playstore and reset the counter.
15. Install BusyBox. There are actually several ways to do this, but the BusyBox app in the Google Play Market is quick and easy. Install it, grant it SuperUser permissions and it'll walk you through the rest and advise you when to update.
16. Update your Binaries.
* Open the Superuser app
* Get into settings (the wrench icon in the upper right of the screen)
* Select Su binary under the General section towards the bottom of the list
* Select Update
**.Your device is now rooted and all set.
** optional: update cwm using rom manager or use img from clockworkmods website. Flash through adb.
Links:
First make sure you read all of the above:
Triangle away:
http://forum.xda-developers.com/showthread.php?t=1494114
New Odin Tar with Stock Kernel: http://www.mediafire.com/?d1t0av7u1e6d3xx
Odin Tar with CWM: http://forum.xda-developers.com/attachment.php?attachmentid=1148060&d=1340384923\
CWM Su fix (flash this in CWM after): http://www.mediafire.com/?0e86q6rexr7g8g4
after that
Hit thanks on Everyone mentioned in this post including myself
Special thanks:
noobnl, mskip and TeamEpic For root CWM
FennyFatal for stock Kernel
Me for Tar and Method testing
IRC for testers
TheSoberRussian for letting me pull his boot.img
^^ hit thanks on everyone here or ill eat u.
Now time to wait for ROMS!
This needs to be sticky
TheSoberRussian said:
Now time to wait for ROMS!
Click to expand...
Click to collapse
mine will go up as soon as i get the device xD
no more blind deving
Here's Odin again....
Yay. I'll give this a go (via Heimdall in Linux) as soon as I get my phone. In the meantime... I'll let you other guinea pigs below this post test it out.
Ohhh how I love root. Let me count theee ways: ClockWorkMod recovery (and nandroid backups), ROMs, TitaniumBackup, AdAway (/system/etc/hosts), adb over wireless, free wifi tethering, permanent debloating, kernel overclocking, CIFS (windoze) network shares, poking around /data/data in a root adb shell, yadda yadda...
Nice. I got my gs3 today
I'm going to wait a week before I do any rooting. Just to feel the phone out
sent from my GALAXY SIII
Process not working for me! I finished the ODIN flashing OK as usual but when going to recovery I end up in stock 3e recovery and not CWM!
Even tried adb reboot recovery and ended in stock 3e recovery too!
Can you check if you uploaded the correct boot.img?
Sweet ty
Sent from my Xoom using xda premium
Great job, can't want to see more from the dev's. Now to add to my reference thread. b:
From the TMO forum:
qbking77 said:
Here's a how to video for everyone!
http://www.youtube.com/watch?v=7Soapch0c5U
Click to expand...
Click to collapse
Original thread:
http://forum.xda-developers.com/showthread.php?t=1726725
mp2ning said:
Process not working for me! I finished the ODIN flashing OK as usual but when going to recovery I end up in stock 3e recovery and not CWM!
Even tried adb reboot recovery and ended in stock 3e recovery too!
Can you check if you uploaded the correct boot.img?
Click to expand...
Click to collapse
Same cant get into CWM recovery
ghost77 said:
Same cant get into CWM recovery
Click to expand...
Click to collapse
The T-Mobile and Sprint root guides root by installing a new recovery.img and this one installs a boot.img.....
No worries here as phone works correctly although the flash counter changed to custom and indicates the 3 times I flashed with ODIN!
Remember, this time its UP VOLUME home and power
duckfart said:
Remember, this time its UP VOLUME home and power
Click to expand...
Click to collapse
I am used to flashing my Samsung phones almost weekly! In fact I also own an International GS3 and I know how to enter recovery; problem is I reach the stock recovery and not CWM recovery!
+1 not working, 3e instead of CWM.
mp2ning said:
Process not working for me! I finished the ODIN flashing OK as usual but when going to recovery I end up in stock 3e recovery and not CWM!
Even tried adb reboot recovery and ended in stock 3e recovery too!
Can you check if you uploaded the correct boot.img?
Click to expand...
Click to collapse
Same here, still booting me into 3e recovery.
Got inpatient and did Sprint root method , and now have root
ghost77 said:
Got inpatient and did Sprint root method , and now have root
Click to expand...
Click to collapse
I figured all variants of US GS3 could have the same recovery but I am not about to try and soft brick it!
I just went to the spring thread and downloaded the clockworkmod.tar file and followed the instructions in THIS thread but instead of flashing the fixboot.tar i did the clockworkmod.tar from the other thread. Now have working root.
my bad man i thought it would have CWM ill fix now
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss , I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
NOTE:- Archos 45 Platinum too has similar device specifications.The same CWM version worked for @best98 who is using an Archos 45 Platinum.
Tip:Using CWM touch recovery
When using the CWM Touch recovery you may notice that it is not really working properly and that touch is not doing anything. The fact is the touch is being registered and that the touch method is different than normal android because of limited drivers in recovery.
The working
Use one finger touch to scroll
Use two finger touch to select item
Installing a Recovery Menu
Using PC
1) Install the Mobile Drivers.
2) Download Minimal ADB And fastboot [Windows users] Linux and Mac users might have to download the whole Android sdk as of now.
3) Download the recovery you want from the attachments below.
4) Rename them to recovery.img after extracting and copy it to a folder of know location.
5) Boot your device into fastboot mode.i.e Power on your mobile by pressing and holding Power button and vol+ Key.until you see A green screen.
6) Connect your device to the PC and open Minimal ADB and fastboot
7) Run the command " fastboot flash recovery C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG".
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
8) Wait untill it completes and VOILA new recovery installed.
Note: In case you want to preserve your stock recovery, run the command "fastboot boot C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG"
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
Using Mobile
Simple Method.
Just install the TACK Manager from here and install the recovery .Enjoy .
Not so simple method
Download the flashable recoveries from Below and flash it through CWM Or TWRP [Yes, you need custom recovery for this to flash]
Click to expand...
Click to collapse
Rooting Your Device
Method 1: Through CWM/TWRP
1) Download the SuperSU package provided below.
2) Copy it to the root of your SDCard
3) Select Install zip from SDCard
Method 2:Through Framaroot
Personally I Did not get any success by this method.But lot of users reported it to to work by using the Gandalf exploit.
Also some versions of framaroot work better on some devices as compared to others.So maybe just have to check which version works for our Mobile.
1) Download and install Framaroot.apk
2) On the exploits list select Gandalf
3) It'll probably crash the first time and apparently work the second time you launch it.
As I Am not sure which version of framaroot works for this mobile hence no upload
Click to expand...
Click to collapse
Reserved
Flashing Roms and Fix Soft brick
1) Copy Rom to SDCard
2) Boot into Recovery by Powering on while holding power and vol+ Button.Initially you'll see a green screen...Keep holding untill the screen turns red.
3) Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
4) Goto Advanced and format Dalvik Cache
5) Select Apply Zip from SD Card
6) Select zip file of rom to install and wait.
7) Reboot and voila.
Note:This is assuming you are using CWMR
Note: Do not format /SYS_BOOT Partition.You'll end up bricking your device and then will not be able to boot into Fastboot mode.
If this happens by mistake.Follow the next Guide.
Click to expand...
Click to collapse
Fixing RESET FOR ENTRY QPST DOWNLOAD
In case you end up Formatting /SYS_BOOT Partition then you'll most likely end up in this.There might be few other cases when this can happen but none that i am aware of.
If you Have a Linux Desktop
If you have access to Linux PC then connect your mobile to it and mount the partition which is around 50 MB. Download the Images.zip from below.unzip the file and copy the whole folder to the 50 MB partition.
Your File structure should look something like this
-\50MBPartition
-\image
-\AMSS.MBN
-\AMSSHD.MBN
If you have Windows
http://www.filefactory.com/file/2n5ygdzybijv
I'll soon put up a guide for windows users.
This is the guide I found on facebook's CM Flame 2.0 group.
DISCLAIMER:
This fix worked for me. I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE, YOU DO THIS AT YOUR OWN RISK!!! Please do the process step-by-step. DON'T SKIP any step as I don't know what will happen and there's a possibilty that your phone will be dead permanently.
TOOLS NEEDED:
Roadkill and StockROM
DOWNLOAD STEPS:
1. Go to www.dropbox.com
2. SIGN-IN using MY credentials
E-mail: [email protected]
Password: dropbox-pemaustria
3. Navigate to the folder cmflame2, there you can find the file.
4. Right click cmflame2stock.zipx, and click download.
(THIS STEPS LEAVE ME NO CHOICE BUT TO GIVE MY DROPBOX ACCOUNT TO YOU. AS A RESPECT, PLEASE DO NOT CHANGE ANY ACCOUNTS AND SECURITY SETTINGS ON MY PROFILE. THANK YOU)
NOTE: Please use WinZip for extracting files. Thanks
TUTORIALS:
1. Disconnect all USB drives especially flash drives, including memory cards.
2. Turn on your device to QPST Mode, and connect it to computer. When a window prompt you to format card. CANCEL.
3. Extract the contents of cmflame2stock.zipx and run Roadkill.exe. Click 'Yes' if administrative privilages prompt you.
4. In the left side of 'Write image to' choose PHYSICAL DISK 1(3.61GB). In my case it is 3.61 GB. Your size must be approximately 4GB. CHOOSE THE RIGHT DISK. CHOOSING THE WRONG DISK WILL RESULT DAMAGE to the selected disk.
5. In your extracted folder, you will see an image file named CM-Flame2.0-StockROM.img.
6. On source file, browse for the image file you just extracted.
7. Click 'START', wait for the process until it's finished.
Click to expand...
Click to collapse
Custom ROM's
Stock Rom
Karbonn Titanium S1
Flashable ZIP
CWM Backup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cherry Mobile Flame 2.0
Flashable ZIP
K-Touch Hornet U86 Kiss
K-Touch 1.3.4 Rom
Archos 45 Platinum
Archos 45 CWM Backup
Click to expand...
Click to collapse
Custom ROMS
LeWa OS 14.05.16
Download
One of the most stable ROMs I've seen for our device.It is Continiuosly developed and supported at Lewatek and has weekly updates at friday.OTA update are available so you don't have to download the whole ROM
MIUI ROM 4.1.17
Highly Customizable ROM.
MIUI Is known for the amount of customization you can do with it.From Statusbar to Lockscreen to everything normal android OS can do.
MIUI ROM Download
Lenovo Magic 4.0
With Support for over 11 Languages and
Download
CM10.1
CM10.1 Base ROM
Update File
CM10.2 Alpha
CM10.2 ROM
CM11 Alpha 3
CM11 ROM
Nokia X ROM Port
This ROM is ported by our friend rdis.
You can find the ROM here
AOSP KitkatFlare
More like Stock ROM with KitKat touch in it.Cooler and more Powerful
This is a KitKat Look alike and not the actual kitkat. For KitKat Check CM11 Above.
AOSP KitKatFlare
IXYNOS
Based on stock
Fully themed with color combination of cyan, yellow, purple and white
Slim rom around 189 Mb
init.d tweaks
build.prop tweaks
ttpod
mifileexplorer
pre rooted
zipaligned
net speed in status bar
good battery life
extremely smooth high performance rom
camera with smile detection
Ixynos ROM
Xperia Z
Xperia Z Download
Click to expand...
Click to collapse
Reserved
Reserved
Thanks idrogon81
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
Custom Recovery
Rooting Method
Click to expand...
Click to collapse
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.
sunilneelam said:
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.
Click to expand...
Click to collapse
That's strange :/
Didnt work for me
Any Cynogenmod roms
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
Custom Recovery
Rooting Method
Click to expand...
Click to collapse
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated
LOLya said:
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated
Click to expand...
Click to collapse
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1
TY
idragon81 said:
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1
Click to expand...
Click to collapse
If uget it bugfree plz upload it
Thanks
English TWRP
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
Custom Recovery
Rooting Method
Click to expand...
Click to collapse
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it
Hi,
Great to read that.. at least after crawling the web and finding that Karbon S5 is equivalent to Archos 50 Platinum.. I find from the specs that this Karbonn S1 is the same as the Archos 45 Platinum that I own.
Specs are : here for the Archos 45..
http://www.archos.com/gb/products/smartphones/platinum/archos_45platinum/specs.html?#a
Finally.. I can't wait to see Cyanogen on it.. maybe a chance to have a CM11 ?
Regards
at last i could successfully port android 4.2.2 to karbonn titanium s1...
the rom is being uploaded...its named as "CHEEKUMOD" as it is edited by me
whats working:
ALMOST EVERYTHING :fingers-crossed:
whats NOT working:
CAMERA FOCUS
REST ALL ITS JUST FINE AND AWESOME !!
see the screen shots mean while
Karbonn Titanium S1 custom rom
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
========================================================================================================
Whats WORKING:
VERSION 1
ALMOST EVERYTHING
VERSION 2
ALMOST EVERYTHING
========================================================================================================
Whats NOT WORKING:
VERSION 1
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
VERSION 2
CAMERA FOCUS
Will give the fix soon,or someone please help me out to fix it...
========================================================================================================
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
VERSION 1:
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
========================================================================================================
DOWNLOAD THE VERSION 2 OF MY ROM HERE WITH MIC FIX AND GAPPS !!
IMPORTANT !!!!!!!!!!!!!!!!!!!!!!! <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
DO NOT FLASH GAPPS WITH THIS VERSION OF MY ROM IT IS PRE INSTALLED IN THE ROM...!!
VERSION 2:
ROM DOWNLOAD: https://drive.google.com/file/d/0Bz2-ARVuWcM9SUVkUnJSSnV3WEU/edit?usp=sharing
GAPPS DOWNLOAD: ITS PRE INSTALLED IN THE ROM DO NOT FLASH AGAIN !! < < < < < < < < < < < < < < < < <---------------------NOTE
Changelog:
1:Fixed "Mic not working in call".
2:have added gapps in the rom file to minimize flashing procedure of flashing each at a time.
========================================================================================================
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!
pls..
idragon81 said:
Flashing Roms and Fix Soft brick
Fixing RESET FOR ENTRY QPST DOWNLOAD
Click to expand...
Click to collapse
Pls.. post a guide for windows users.thanks
CWM is the solution
claymisteryo said:
Pls.. post a guide for windows users.thanks
Click to expand...
Click to collapse
Its not necessary to flash or reset the soft brick using any OS,
U can do it by CWM also.
1]For softbrick u can just factory reset and wipe cache
2] for flashing u can mount and remount sdcard and copy the .zip file to it and choose install zip from sdcard
Plz accept my request
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Click to expand...
Click to collapse
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it
LOLya said:
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it
Click to expand...
Click to collapse
me too not able to download
Mincrophone not working!!
when you call, the other person cannot hear your voice.... plz fix this!
its quite a major BUG!
Original Site
chetan007cheeku said:
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
Whats WORKING:
ALMOST EVERYTHING
Whats NOT WORKING:
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
Will give the fix soon,or someone please help me out to fix it...
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!
Click to expand...
Click to collapse
Actually Cheetan this is the site with the same ROM,no offence.You might have modified much in this ROM(Your ROM(Cheeku ROM))
Site: http://www.needrom.com/mobile/k-touch-u86-7
Problem is u just need to make account
LOLya said:
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it
Click to expand...
Click to collapse
can i use any twrp version instead?
This is a LineageOS 15.1 ROM for the Exynos3470 based Samsung Galaxy S5 mini (G800F/G800M/G800Y).
DO NOT USE IT FOR G800H OR YOU WILL BRICK YOUR DEVICE
Please do not ask for support or ROMs for the G800H. G800F and G800H have nothing in common.
Working features
HW accelerated GUI
Initiate and receive calls
Camera (only photos)
Flash Light
Sound
Fingerprint scanner
Hardware sensors (Orientation, Compass, Proximity, Acceleration, Hall sensor, Step counter)
Light sensor (needed for auto-brightness)
Pulse sensor (preliminary and very inaccurate. Works with Apps like Kardiograph)
Wifi
GPS
Bluetooth (A2DP, HFP, HID)
Mobile Data
SMS
MTP storage
USB-OTG (Keyboard, Mouse, USB-Audio)
IR
NFC
Video reproduction is still sometimes a bit buggy on browser (Youtube works fine)
Untested features:
SD-Card as internal storage
Known issues:
USB-OTG (Mass-Storage): detected but the file-system is not usable and will be corrupted afterwards (--> do not connect your USB-stick at the moment)
SELinux not enforcing
Video recording is still buggy/not working (crashes)
Fingerprint scanner can only records 3 fingers and sometimes it could be unresponsive
Disclaimer:
You flash this image at your own responsibility. I am not responsible for any damage that might be caused by flashing this image (bricked device, lost data, ...)
Flashing this kernel image will trigger the KNOX counter, so your warranty will be void.
Applications that use KNOX (e.g. "Private Mode") might not work anymore when returning to the stock ROM, as the device is regarded as compromised. Do not flash this ROM if you need those applications.
The image is only for Exynos3470 based S5 Mini variants SM-G800F/M/Y.
It might be instable, crash your device, drain your battery, or even might damage your smartphone (e.g. if an USB-OTG device drains too much power)
Click to expand...
Click to collapse
Before you start:
Backup your data, like call history, contacts, sms, WhatsApp messages, favourite app settings that are on internal and external sd (by using Titanium Backup or other apps available on PlayStore). At least all internal data will be lost in any case. If you have bad luck you might also loose data from your external sd card.
Important note: It is possible that flashing this ROM can cause efs partition issues. Therefore it is strongly recommended to make a backup of your efs partition before flashing this ROM. This can be done via TWRP.
Download:
Odin3-v3.07 (it is contained in CF-Auto-Root)
TWRP 3.1.1-0 (.tar.md5 file)
Latest TWRP (.img/.tar file)
LineageOS 15.0 ROM for G800F/M/Y: Android File Host
LineageOS 15.1 Monthly/Weekly updates (@Andrea224): Google Drive
Open GApps (select the variant you prefer, e.g. mini)
Install recovery:
Reboot your device into Download mode: turn off your device, then press Volume-Down + Home + Power button at the same time and release them.
Confirm the following warning message with the Volume-Up button.
Connect your device to your PC via USB
Make sure the device driver's are installed on your PC
Start Odin
In Odin select "PDA" (in newer versions: "AP") and select the recovery image (recovery.tar.md5)
Check that only "F. Reset Time" is set. "Auto Reboot" should be disabled to avoid a reboot into stock ROM.
Click on "Start": the recovery image should be flashed now. By flashing the recovery, your warranty will be void.
After the recovery flashing process was successful, reboot into recovery mode (see instructions below).
Important: make sure not to boot into stock ROM, otherwise the stock ROM might remove the custom recovery again. If this happens, flash the recovery image again.
Flash ROM:
Reboot into recovery mode (Press Volume-Up + Home + Power button)
Make a Backup of your phone (Backup, then select Boot, System, Data, then swipe to backup). Note that the recovery might fail to restore the backup when you want to go back to the stock ROM.
Copy GApps and LineageOS ROM zip to your device's internal or external SD card
Connect your device via USB to a PC. You should see the device in the Windows File Explorer now.
If you do not see the device in File Explorer, make sure that MTP is enabled (inside Mounts, click on Enable MTP).
If MTP does not work from recovery, try to copy via MTP by booting your old Android ROM or just remove the external SD card and copy to it directly.
Select one of the two drives (internal or external SD) and copy the files to it.
Do not put the files into the data directory of the internal sd card, otherwise they will be wiped in the next step.
Wipe Dalvik Cache, Cache, System and Data (inside Wipe -> Advanced Wipe).
Do not report problems if you did not wipe those partitions as the problems are most probably related to this!
Install the LineageOS ROM zip package
Install the GApps zip package
How to root:
LineageOS does not have root support integrated by default. You have to download addonsu-arm-signed.zip for 14.1 from the Lineageos Extras download page and install it with TWRP.
After that root access is still disabled by default. If you want to activate root access for apps, do the following:
Open the Settings menu, select "About Phone"
Tap on the "Build number" entry seven times. You should be notified, that the developer settings are now active.
Open the Settings menu, select "Developer options". Enable root access by selecting "Apps" in the "Root-Access" setting.
In case you want to go back to the stock ROM:
lf you do not have the latest ROM for the G800F you can download it from SamMobile
Reboot your phone into Odin mode
Open Odin on your PC and connect your smartphone with your PC via USB
If you have a zip-file unzip it so that you have a .tar.md5 file
In Odin click on the PDA button and select the .tar.md5 file. Then press "Start".
Normally the stock rom fails to boot as the data from CM is still on the data partition. So after flashing the stock rom, reboot into recovery mode (it looks a bit different now). First wipe the data partition, then wipe the cache.
Reboot
Changelog
Code:
24/10/2017:
* Wake on Home button press
* Model string fixed ("G800F" instead of "G800")
* GPS fixed
* Bluetooth fixed
* Update to newest LineageOS sources
* Note: Android 8.0 requires a new TWRP recovery (build from 22/10/2017). otherwise you will not be able to flash the image ("E3004: This package is for device: kminiltexx,kminiltedv,kminilteub,kminilte; this device is .")
10/10/2017:
* telephone calls working
* Camera works (recording videos might still not work)
* LineageOS sources updated
24/09/2017:
* Initial test build
Source:
https://github.com/cm-3470/android_device_samsung_kminilte (Check README.md for build instructions)
Help from other developers is always welcome. Just ask in this thread or PM if you want to help.
Thanks to spookcity138, ayke, mirhciulica, Psyafter and CTXz for working on this ROM.
XDA:DevDB Information
[G800F/M/Y][ROM][8.1.0][OPM2] LineageOS 15.1 for G800F/M/Y [Alpha], ROM for the Samsung Galaxy S5 Mini
Contributors
hennymcc, ayke, Andrea224, spookcity138, mirhciulica, CTXz
Source Code: https://github.com/cm-3470
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP Recovery [version >= 22/10/2015]
Based On: LineageOS
Version Information
Status: Alpha
Created 2017-09-24
Last Updated 2018-07-05
Wow thanks for your amazing work!
I am experiencing random reboots when I lock my device.
oh nice, im testing right now
tibor8 said:
I am experiencing random reboots when I lock my device.
Click to expand...
Click to collapse
Thanks for the info. I was able to reproduce it now. Will be fixed in next build.
RIL will be fixed too.
phone when it locks up in a reset, it does not turn on a constant download, and the wi-fi is on and off after every 5 seconds. Also, there's no way to turn off the backlight of the buttons. Also, I noticed that the connection only lights up H on the seven I'm on H +
wasya78 said:
phone when it locks up in a reset, it does not turn on a constant download, and the wi-fi is on and off after every 5 seconds. Also, there's no way to turn off the backlight of the buttons. Also, I noticed that the connection only lights up H on the seven I'm on H +
Click to expand...
Click to collapse
That means you see the SIM-card now?
yes sim card is seen
---------- Post added at 09:20 AM ---------- Previous post was at 09:17 AM ----------
still noticed that the android 8.0 does not work camera
amazing
wasya78 said:
yes sim card is seen
Click to expand...
Click to collapse
Hallelujah, I'm gonna go get drunk *vodka*
ty best news since your lineage 14 release +++
Hello, is it possible to deactivate this new Slide Menu on Home Screen? To have the old Catapult menu Button back? Or will it be possible in future releases?
There is root inbuild again?
Thanks for development!!
MikeT. said:
There is root inbuild again?
Thanks for development!!
Click to expand...
Click to collapse
No
Sorry my mistake, its the rootmanagment for addonsu in develooer options, now i see it.
Thanks for fast reply
Great! Thanks. Looking forward to next build.
Will these non-working features be updated soon? Because I am using version 14.1 at the moment, and I can't even start the camera... I hope you will either update the previous version or get the camera working in version 15 so I can use that version.
just wanna stop by and tell you that you're awesome, keep up the amazing work!
Jelsie said:
Will these non-working features be updated soon? Because I am using version 14.1 at the moment, and I can't even start the camera... I hope you will either update the previous version or get the camera working in version 15 so I can use that version.
Click to expand...
Click to collapse
At least camera and calls work now. I was abroad for a week so I could not work on it or release a new build.
Maybe there will be a new build next week.
I uploaded a new build with RIL and camera fixed. See opening post for more details.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Based ROM: Elephone_P8Mini_20170914
10/14 - UPDATED: TWRP version added
This is recommended for people that want something like more pure like AOSP, and without malware.
- Launcher changed to Next Launcher.
Ps. This is same Port ROM that i already released in japanese site at 1st October 2017 https://egg.5ch.net/test/read.cgi/smartphone/1504178568/208-209
TWRP version:
- Download link: https://mega.nz/#!iRkxALgJ!kuIwBusd_F_TqYj93CmzY03Z67NhDDrjN_8tJGMqOtk
- Install TWRP (real source link https://4pda.ru/forum/index.php?s=&showtopic=847735&view=findpost&p=65694030) You can download too in https://androidfilehost.com/?fid=673791459329051837
- Boot to TWRP
- Wipe Dalvik / ART Cache
- Wipe System
- Wipe Cache
- Wipe Data
- Wipe Internal Storage
- Install Port ROM
- Wipe Cache & Dalvik
- Reboot to system
- Done.
SP Flash Tool Version (complicated method):
- Download link: https://mega.nz/#!fddnGaqT!067RI1iNJn5U14NWoXyCf6LY8Nj-jC31Tw3CAQohKlQ
Attention: My guide only for people with original state, doesn't with mofidication. If you installed TWRP or rooted so please doesn't follow guide below. Use TWRP version.
1 - Update firmware your S8 to latest.
1.1 - Factory Reset (make backup before to do this step)
2 - Extract file of link above.
3 - Install adb-setup-1.4.3.exe from Tools folder. This is included in Tools folder, but you can download here https://forum.xda-developers.com/showthread.php?t=2588979
4 - Extract MT65xx USB VCOM DRIVERS.zip from Tools folder and install (use this guide if you don't know how install https://www.getdroidtips.com/install-mediatek-mt65xx-usb-vcom-drivers/)
5 - Extract SP_Flash_Tool_v5.1728.rar from Tools folder
6 - After extracted files of item 4, find flash_tool.exe and open.
7 - Click choose of Scatter-loading File and select MT6755_Android_scatter.txt from ROM folder that you extracted on item 1.
8 - Check if "Download Only" is selected, and only Recovery, Boot and System are selected like image below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
9 - Turn off the S8
10 - Click Download button of Smart Phone Flash Tool
11 - Wait for the process to complete
11.1 - Check if popup like below appear
12 - Disconnect your S8 from PC
13 - Turn on the S8
14 - Copy all files inside of Gapps folder that you extracted on item 1 to your smartphone (location doesn't import here)
15 - Turn ON USB Debugging Mode (use this guide if you don't know how to do https://www.kingoapp.com/root-tutorials/how-to-enable-usb-debugging-mode-on-android.htm Read the item 4 (4. Android 5.0 Lollipop))
16 - Connect your S8 to PC
17 - Use command below to reboot to recovery in CMD of your PC
Code:
adb reboot recovery
18 - If appear dialogue click Yes
19 - In CWM recovery
20.1 - Wipe Menu＞Wipe Data - Factory Reset
20.2 - Install G-Killer.zip that you copied to S8 in step 14 (This is included in the Gapps folder of item 13, but you can download here https://forum.xda-developers.com/showthread.php?t=2588979)
20.3 - Check only itens below and remove gapps (if you do not do this step the google play doesn't work)
20.4 - Now install opengapps that you copied to S8 in step 14 (This is included in the Gapps folder of item 13, but you can download here http://opengapps.org/)
20. 5 - Optionally you can install Magisk that you copied to S8 in step 14 (This is included in the Gapps folder of item 13, but you can download here https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445)
20.6 - Before reboot Wipe Cache and Wipe Dalvik Cache
20.7 - No for "Root access is missing. Root device?"
21 - Done.
thanks,
this works wit bluboo s8 ?
https://forum.xda-developers.com/general/device-reviews-and-information/bluboo-s8-information-reviews-5-7-hd-t3673085
is this multilanguage?
Point 17 – ? how do I do that to reboot to recovery with CMD.
can you say that more precisely.
is there no key function volume + power? I dont know
bananaci said:
thanks,
this works wit bluboo s8 ?
https://forum.xda-developers.com/ge...bluboo-s8-information-reviews-5-7-hd-t3673085
is this multilanguage?
Point 17 – ? CMD.Is there no key function volume + power? I dont know
Click to expand...
Click to collapse
....1. this works wit bluboo s8 ?
2. is this multilanguage?
3. Point 17 – ? how do I do that to reboot to recovery with CMD.can you say that more precisely.is there no key function volume + power?.....*///
***Note:
I do not have this device (getting 1 maybe, if *Future Custom ROMs & curiosity of $158 S8), so my answers might NOT be reliable or worth a click ?
1. Yes, the developer's OP clearly mentioned "for bluboo S8)
2 Yes(99%). *English(UK), is usually default inclusive→
OR
The specific preferred language, u say? might be the needed gem for your question "multilanguage?", Because it seems like variants and of MTK has a difference.
For example, German(Austria) included in 1, may not be there in the other.
3 .I think The Dev's OP, already stated, precisely.
Usually, after you enable those options,
(...Enable via USB debugging OEM, ADB etc [√] found under *developer mode/option* on the device),
Go to your PC, → ^ADB folder, (where you have downloaded & installed the ADB.exe,) press shift+rightclick and choose "Open with Command Prompt"
And type the command as Developer mentioned above ( instructions -OP)
(Or available commands on ADB/fastboot recovery on Linux/windows).
I havent use this (Elephone S8 Ported mini), and as I said I do not have a bluboo S8 (yet).
Do let me know if substratum theme works on this.
however, developer's effort on # Clean AOSPA minus bloatwares, is Great work already. Totally worth a click on "?". For device like this it's even hard enough to get a honest user review.
I still can't make a decision between other s8-lookalikes available. HomtomS8,Leagoo S8, Umidigi, Ulephone considering ROMs support).
Point 11,12,13. MT6755_Android_scatter.txt perfectly installed with flash tool
But the phone boots only carlycwm
so I did I followed point 19. so i do:
20.1 - Wipe Menu＞Wipe Data - Factory Reset
20.2 - Install G-Killer.zip
20.4 - Now install opengapps
20.6 - Before reboot Wipe Cache and Wipe Dalvik Cache
20.7 - No for "Root access is missing. Root device?"
21 - Done.
But always the same. the phone boots only carlycwm.
what can i do?
bananaci said:
Point 11,12,13. MT6755_Android_scatter.txt perfectly installed with flash tool
But the phone boots only carlycwm
so I did I followed point 19. so i do:
20.1 - Wipe Menu＞Wipe Data - Factory Reset
20.2 - Install G-Killer.zip
20.4 - Now install opengapps
20.6 - Before reboot Wipe Cache and Wipe Dalvik Cache
20.7 - No for "Root access is missing. Root device?"
21 - Done.
But always the same. the phone boots only carlycwm.
what can i do?
Click to expand...
Click to collapse
Hi,
you probably have skipped step 19.
Factory Reset inside of CWM recovery.
Updated the first post with TWRP version.
now my phone is dead, ican nothing do.
now when i insert cable with phone is started only cwm..phone not reboot
bananaci said:
now my phone is dead, ican nothing do.
now when i insert cable with phone is started only cwm..phone not reboot
Click to expand...
Click to collapse
Flash TWRP in SP Flash Tool and follow TWRP instruction of first post.
- Turn off S8
- Press Download button in SP Flash Tool
- Connect cable
- If flash TWRP recovery doesn't start Hold the power button until progress start
Reason that only start in CWM.
- You upgraded firmware using another recovery that does't original one
- You used factory reset of system using another recovery that does't original one (probably this it's the cause, appear that you using TWRP https://forum.xda-developers.com/showpost.php?p=74092694&postcount=21). Probably you followed my guide with TWRP. My guide only for people with original state, doesn't with modification.
You never can use factory reset of system with TWRP or CWM.
ok thanks, ill try this
it works not.Nothing.
The problem is when i plug the cable into pc or dc just boot only carlywm ported by ghost45.version 6_kk_carliv-mod.
before i flashed your ported rom with flash tool i had before twrp 3.1.1 Bluboo S8 on my phone..since everything had worked.
And now i can nothing do. it comes only cwm ghost45.version 6_kk_carliv-mod.
I`ll tried your rom
TWRP version:
- Download link: https://mega.nz/#!iRkxALgJ!kuIwBusd_...DrjN_8tJGMqOtk
with cwm ghost45.version 6_kk_carliv-mod to flash it installes it.
but when the phone first boot it comes allways cwm ghost45.version 6_kk_carliv-mod.
so i`ll tried anymethodes with flashool first press download than press power hold... down... nothing ..it comes jus cwm ghost45.version 6_kk_carliv-mod.
bananaci said:
so i`ll tried anymethodes with flashool first press download than press power hold... down... nothing ..it comes jus cwm ghost45.version 6_kk_carliv-mod.
Click to expand...
Click to collapse
So follow all step below correctly, doesn't skip steps.
Download TWRP Recovery for CWM
https://mega.nz/#!md8AAZxR!5iepVFzSKGY0F-FlPLfCxSw3nH7r6-VgpBaemAlSclk
Install recovery twrp.zip of link above in CWM.
Reboot.
Now will reboot in TWRP
IN TWRP
- Wipe Dalvik / ART Cache
- Wipe System
- Wipe Cache
- Wipe Data
- Wipe Internal Storage
- Install Port ROM (First Post of this thread)
- Install recovery original.zip https://mega.nz/#!jMMRHbTI!eU-saTyapPon8xdfa2NORdpeV5CSGFfzdQHuqkwAcRE (this is very very important step)
- Wipe Cache & Dalvik
- Reboot (wait, doesn't restart until system start completly)
- Now original recovery will restored. If you need twrp, you need install again. And doesn't use factory reset of system, samething will happen again.
bananaci said:
before i flashed your ported rom with flash tool i had before twrp 3.1.1 Bluboo S8 on my phone..since everything had worked.
And now i can nothing do. it comes only cwm ghost45.version 6_kk_carliv-mod..
Click to expand...
Click to collapse
I already explained before. This isn't my fault. You used my guide (SP Flash Method) with TWRP.
If used factory reset with TWRP, of cource that will result in that.
I will be giving this a try tonight. Is there a way to keep the Blueboo startup animation or will this change that? Not that it matters much. Do all the features of the phone work with this rom?
labellee25 said:
I will be giving this a try tonight. Is there a way to keep the Blueboo startup animation or will this change that? Not that it matters much. Do all the features of the phone work with this rom?
Click to expand...
Click to collapse
This Port Rom use elephone animation.
Yes all feature of phone work fine.
oh yes, yuppi.ya yeahh it works.
with tis TWRP Recovery for from 3.1.1 by Jemmini works now. I had that before.
and your yor port rom works fine ..
I will report you.
thank you for your understanding
bananaci said:
oh yes, yuppi.ya yeahh it works.
with tis TWRP Recovery for from 3.1.1 by Jemmini works now. I had that before.
and your yor port rom works fine ..
I will report you.
thank you for your understanding
Click to expand...
Click to collapse
Thanks for feedback.
I dont know why,
I can not bluboo connect with any PC?.
with the original software was not so.
can you help?
bananaci said:
I dont know why,
I can not bluboo connect with any PC?.
with the original software was not so.
can you help?
Click to expand...
Click to collapse
Have you tried with another PC?
I can't reproduce your issue. So unfortunately I can not help you.
yes i tried with,
winxp,win7 and win10,with my
old pc win7 til yet havent problem but with your rom can,t connect now.
so i chanced c-cable nothing happens
with another smartphones zopo,lenovo,samsung can i connnect my pc.there is no problem with this phones.
Same for me can't use sp flash tool to root too.. PC only see it in usb mode for camera or file transfer
Debug modus is on.
The problem is when i connected my phone it say just battery charging.
Here is the problem cause I can not switch usb mode for camera or file transfer.
There is a point on status bar at the top to switch usb mode for camera or file transfer.
NOTHING HAPPENS Here
What a pity this stable Rom has an error/bug here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
OrangeFox Recovery is one of the most popular custom recoveries, with amazing additional features, fixes and a host of supported devices
OrangeFox version: R11.1
For device: a32
Maintainer: Ahnet ( @Captain_cookie_200 )
OrangeFox source:
OrangeFox Recovery · GitLab
OrangeFox Recovery | OFR
gitlab.com
Device tree:
GitHub - Epico-Bot/ofox_device_samsung_a32: Device tree for building OrangeFox Recovery for Samsung Galaxy A32 4G (MTK), based on A325FXXU2BVD6.
Device tree for building OrangeFox Recovery for Samsung Galaxy A32 4G (MTK), based on A325FXXU2BVD6. - GitHub - Epico-Bot/ofox_device_samsung_a32: Device tree for building OrangeFox Recovery for Sa...
github.com
Kernel Source: https://github.com/ahnet-69/android_kernel_samsung_a32-recovery
Features:
Code:
Synced with the latest Teamwin changes
Designed with latest Material design 2 guidelines
Implemented support for Flyme and MIUI OTA, and incremental block-based OTA in custom ROMs
Included assorted customizations
Inbuilt patches, like Magisk and password reset patch
Several addons
Password protection
Fully open-source
Frequently updated
Status
Stable-ish
Tested on:
SM-A325F (by me)
SM-A325M (by @filipedonato)
other models unknown. But should work.
Please report back so i can update the op
Downloads
Click here.
Bugs
1. TWRP cannot decrypt userdata if you set lockscreen. (someone said it works, other it doesn't, so I'll just leave it here, YMMV)
2. Flashing anything shows many "unlock" red lines. (They are currently harmless by our knowledge).
3.USB-OTG
4. Saving settings is fixed but for fixing settings such as theming resetting on reboot is by editing the bootable/recovery/twrp.cc and at line 396 (as of now) changing the bool to true. This makes the recovery load the themes twice. This should only be for encrypted devices but since it has fixed our issue we'll use this workaround until a proper solution has been found.
Installation
Code:
If you have TWRP or any custom recovery installed and bootable, you can upgrade instead; Look below.
<!> the installation will require WIPING DATA. You will also lose access to all Knox-based solutions like Secure Folder.
Backup every precious data you have on your phone.
<!> PC is required. Windows is preferred. (You probably know what you are doing when using Linux/Heimdall. We don't talk about Macs)
Unlock Bootloader:
1. Go to Settings > About Phone > About Software. Tap build number (10 times) until "you are now a developer" toast shows up.
2. Go back, go to Developer Settings.
3. Turn on OEM unlock toggle.
4. Turn off your phone, hold vol-up + vol-down, then plug in charging cable (please don't use 3rd-party charging-only cable, it must have data transfer capability).
5. Your device will boot into download mode with a warning. Accept it.
6. Hold volume-up until the phone shows the bootloader unlock panel "Unlock Bootloader?".
Press volume-up again. Now your phone bootloader is unlocked.
<!> It will now begin the process of wiping data. Let it do its job.
7. When it reboots to OS, finish setting up your device.
8. Double check to make sure OEM Unlock is still ON.
Preparing for the installation:
1. Download everything above onto your PC.
2. Rename OrangeFox recovery img file to recovery.img and add it to archive using any archiver and select gnu tar.
3. Install Samsung USB Driver.
4. Open Odin.
5. Connect your phone to your PC. There should be a COM entry on the top.
6. Make sure your phone is in Download Mode. (see step 4 of section Unlock Bootloader)
7. Make sure that OEM LOCK and REACTIVATION LOCK on your screen show "OFF". If it's not off, DO NOT PROCEED ANY FURTHER.
<!> For those with lock ON, use your device for 7 days without rebooting once. Then check the locks above again.
Installing:
1. Ensure phone is in Download mode.
In Odin:
Load in Userdata: VBMeta_disabler.tar file.
Load in AP: OrangeFox TAR file.
2. Prepare yourself. keep your hand on Volume-up and Power button (don't press yet).
3. In Odin, press Start. It will flash, then reboot. When the screen turned off, quickly press Vol-up and Power button to boot to recovery (this should take about 20~30 seconds).
<!> You should have OrangeFox up and running now.
Post-Installation:
MUST: Trigger Multi-disabler.
1. In OrangeFox, go to Terminal.
2. Type multidisabler, then enter. If it fails with something about vendor free space, run it again.
3. Run multidisabler again.
4. Go to main screen. go to Wipe > Format Data, type yes then swipe.
5. Reboot to Recovery. Now you can do other stuff.
Should: Backup all vital partitions:
1. In OrangeFox, go to Backup
2. Backup: EFS, Modem, NVRAM.
Enjoy: Reboot your phone to have a rooted stock, install custom stuff or do whatever you want.
Upgrade:
<!> Use when you already have any custom recovery installed (TWRP, SHRP, PBRP and the likes)
1. Download the recovery image.
2. Copy it to phone, then reboot to OrangeFox (Combo is Power + Volume-up)
3. Go: Install > select recovery.img file > select Recovery
4. Swipe to confirm flashing.
5. If success, reboot to recovery.
<!> You can also use Odin to upgrade, the steps similar to the Install section. All Post-installation, if already done, is unnecessary to do again.
Credits:
To the OrangeFox and TWRP team and everyone involved in making this all work.
@Long266 For his kernel and amazing work.
@ianmacd For multidisabler.
@afaneh92 For his a32x base tree and MTK-Samsung multidisabler.
@KrutosVIP For his experimental lineage kernel source from here.
reserved
reserved
I have tried to talk to various developers about the settings not saving issue. They have no idea. I have myself tried playing around with the tree but nope. So unless someone has a fix for this i have no idea
New Build!
Whats new?
Fixed the settings such as theming resetting on reboot by editing the bootable/recovery/twrp.cc and at line 396 (as of now) changing the bool to true. This makes the recovery load the themes twice. This should only be for encrypted devices but since it has fixed our issue we'll use this workaround until a proper solution has been found.
If you see the recovery trying to decrypt storage dont worry about it. its just because of this. It does nothing.
It's stable? I mean, i can install gsi's and zips?
ApiYoshi said:
It's stable? I mean, i can install gsi's and zips?
Click to expand...
Click to collapse
yes i use orangefox. flashing gsi works fine. same goes with zips
Captain_cookie_200 said:
yes i use orangefox. flashing gsi works fine. same goes with zips
Click to expand...
Click to collapse
Ok, i flashed it and is awesome!! Thanks for great work brother!
ApiYoshi said:
Ok, i flashed it and is awesome!! Thanks for great work brother!
Click to expand...
Click to collapse
You should make a telegram group
ApiYoshi said:
You should make a telegram group
Click to expand...
Click to collapse
i dont really know on how to maintain one. me and someone else made it but its sitting dead i'll see later on. and i'll post a thread abt it if there are any updates
Works in A32 A325M Brazil variant.
really nice you are keeping the a32 alive!
applesucksLmao said:
really nice you are keeping the a32 alive!
Click to expand...
Click to collapse
i did nothing tbh. all the credit goes to the people who put effort in making twrp work i just copied and built it. all the credit goes to them
Captain_cookie_200 said:
i dont really know on how to maintain one. me and someone else made it but its sitting dead i'll see later on. and i'll post a thread abt it if there are any updates
Click to expand...
Click to collapse
Ooh, i undertand
One question, you will update the recovery when an update came out?
ApiYoshi said:
One question, you will update the recovery when an update came out?
Click to expand...
Click to collapse
yes i will try
Where do I get the orange fox TAR, I see it in the steps but I don't see it to download it
Seth Ofc said:
Where do I get the orange fox TAR, I see it in the steps but I don't see it to download it
Click to expand...
Click to collapse
sorry i didnt include it. but i think i specified. rename OrangeFox recovery img file to recovery.img
then use 7zip or winrar or any other archiver and then add to archive. There select tar and compress. I'll include tar files in next builds by default
Thanks I already compressed the recovery.img to recovery.tar, do you know of any aosp rom for the a325m I was looking for but I can't find it
Seth Ofc said:
Thanks I already compressed the recovery.img to recovery.tar, do you know of any aosp rom for the a325m I was looking for but I can't find it
Click to expand...
Click to collapse
use a generic system image.
if you want heres a list: here