Dear xperiaM users,
I installed new fxp320 build in my phone but if we press home key when call is ON and then we can't disconnect the call
I need to switch flight mode for disconnecting the call
Pls help @PecanCM, @Bonoboo
KHM90 said:
Dear xperiaM users,
I installed new fxp320 build in my phone but if we press home key when call is ON and then we can't disconnect the call
I need to switch flight mode for disconnecting the call
Pls help @PecanCM, @Bonoboo
Click to expand...
Click to collapse
hey can you flash this kernel from recovery please and check your problem ?
edit: sorry uploaded wrong kernel download this one http://www.mediafire.com/?yhd7xf7yorw1551
PecanCM said:
hey can you flash this kernel from recovery please and check your problem ?
edit: sorry uploaded wrong kernel download this one
Click to expand...
Click to collapse
Okay Flashed this,
Tested with the same scenarios,
And now calls are disconnecting.... Your patch worked flawlessly. Thank you vry much☺
Just one more question:
Do I need to flash this with every new build?
KHM90 said:
Okay Flashed this,
Tested with the same scenarios,
And now calls are disconnecting.... Your patch worked flawlessly. Thank you vry much☺
Just one more question:
Do I need to flash this with every new build?
Click to expand...
Click to collapse
no don't need to flash, reverted proxy sensor patch for now until finds Solution don't want this problem in fxp321.
PecanCM said:
no don't need to flash, reverted proxy sensor patch for now until finds Solution don't want this problem in fxp321.
Click to expand...
Click to collapse
Thank you, You are very helpful to a new member like me.... Love your work for Xperia M☺
PecanCM said:
hey can you flash this kernel from recovery please and check your problem ?
edit: sorry uploaded wrong kernel download this one http://www.mediafire.com/?yhd7xf7yorw1551
Click to expand...
Click to collapse
I should flash this via CWM right? No need of PC right?
syedafzal.shah said:
I should flash this via CWM right? No need of PC right?
Click to expand...
Click to collapse
Yeah no need of PC, just flash via cwm
KHM90 said:
Thank you, You are very helpful to a new member like me.... Love your work for Xperia M☺
Click to expand...
Click to collapse
hey you can you flash this kernel https://www.mediafire.com/?zesp1fy6oek2gla on your xm if you still running on any 4.4 rom and test proxy sensor problem ?
PecanCM said:
hey you can you flash this kernel https://www.mediafire.com/?zesp1fy6oek2gla on your xm if you still running on any 4.4 rom and test proxy sensor problem ?
Click to expand...
Click to collapse
I can test that by tomorrow my laptop is in service centre, I'll will get it by tomorrow....
So I'll report back as soon as I get it?...
I'm using fxp only so results will be accurate.
KHM90 said:
I can test that by tomorrow my laptop is in service centre, I'll will get it by tomorrow....
So I'll report back as soon as I get it?...
I'm using fxp only so results will be accurate.
Click to expand...
Click to collapse
you don't need laptop it's packed in anykernel so just flash from any recovery
PecanCM said:
you don't need laptop it's packed in anykernel so just flash from any recovery
Click to expand...
Click to collapse
Oh... Sorry I thought its boot.img file
Okay flashing now and report you soon?
@PecanCM, Flashed that patch. Tested both the way(incoming-outgoing) everything seems to be working with same scenario, calls are disconnecing.
Proximity distance is also good?
Sent from my C1905 using XDA Premium 4 mobile app
KHM90 said:
@PecanCM, Flashed that patch. Tested both the way(incoming-outgoing) everything seems to be working with same scenario, calls are disconnecing.
Proximity distance is also good?
Sent from my C1905 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
great thanks for testing
PecanCM said:
great thanks for testing
Click to expand...
Click to collapse
Pleasure Bro. All thanks to you
Related
Port of Meizu Flyme OS ICS based on crespo Rom
Please check and report bugs
http://www.hotfiles.ws/0idbukol5oca
Right now in office
will upload screenshot after getting home
see this post for network/wifi fix
http://forum.xda-developers.com/showpost.php?p=36500187&postcount=53
For clk and magldr
Use 230-250MB system partition
PLEASE READ VERY CARFULLY
First priority is to make essential features work that being said camera is least of my priority.
Please do not bother me if your favorite application does not work either fix it yourself and share the fix or wait for me to fix when I get time provided I am able to reproduce the error
Reporting bug without providing log is not bug reporting but a torture if you do not know to how collect logs atleast explain how to reproduce error.
Tried to port it myself too but it wasn't booting.good to see that u did it nice job :thumbup:
Sent from my LG-P350 using xda premium
are there any photos about this rom?
jully3881 said:
are there any photos about this rom?
Click to expand...
Click to collapse
Go to youtube and type meizu flyme os and see how it looks like. It seems nice.
Anurag pandey said:
Tried to port it myself too but it wasn't booting.good to see that u did it nice job :thumbup:
Sent from my LG-P350 using xda premium
Click to expand...
Click to collapse
your rom can not download , can u check it
jully3881 said:
your rom can not download , can u check it
Click to expand...
Click to collapse
May be it is getting blocked by firewall in china
smokin901 said:
May be it is getting blocked by firewall in china
Click to expand...
Click to collapse
yes,you're right.
0719andy said:
yes,you're right.
Click to expand...
Click to collapse
ultrasuft can help you
This is for MAGLDR or CLK ? Partition layout ?
tin1203 said:
ultrasuft can help you
Click to expand...
Click to collapse
Thank you! But I'm using Goagent.
Which download site is unblocked in china
Sent from my One X
hey Smokin901 does data work for you? Im on clk and i flashed it but no data. when i hit the network i get a fc. so Does it work for you if so than its an error on my part just wanted to make sure.
[email protected] said:
hey Smokin901 does data work for you? Im on clk and i flashed it but no data. when i hit the network i get a fc. so Does it work for you if so than its an error on my part just wanted to make sure.
Click to expand...
Click to collapse
Can't check phone is at home is your phone picking up mobile network.
Sent from my ONE X
smokin901 said:
Which download site is unblocked in china
Sent from my One X
Click to expand...
Click to collapse
Thank you.If you have time,please upload to these sites:
http://pan.baidu.com
or
http://dl.vmall.com
EDIT:
BTW,you know Chinese? I ask that because you're interested in MIUI and Flyme which are from China. :good:
[email protected] said:
hey Smokin901 does data work for you? Im on clk and i flashed it but no data. when i hit the network i get a fc. so Does it work for you if so than its an error on my part just wanted to make sure.
Click to expand...
Click to collapse
I have this same problem. I have CLK too
smokin901 said:
Can't check phone is at home is your phone picking up mobile network.
Sent from my ONE X
Click to expand...
Click to collapse
no it just has an x there. the wifi worked and all but i get a force close when i hit network it says something like com.android.phone fc something like that. this is my only phone so i flashed something else. Thank you ill see if i can fix it on my own.
smokin901 said:
PLEASE READ VERY CARFULLY
First priority is to make essential features work that being said camera is least of my priority.
Please do not bother me if your favorite application does not work either fix it yourself and share the fix or wait for me to fix when I get time provided I am able to reproduce the error
Reporting bug without providing log is not bug reporting but a torture if you do not know to how collect logs atleast explain how to reproduce error.
Click to expand...
Click to collapse
Thanks for sharing! :laugh::victory:
smokin901 said:
Can't check phone is at home is your phone picking up mobile network.
Sent from my ONE X
Click to expand...
Click to collapse
In fact,DFT.cn member have made at least one week age,however,I don't know what's difference between yours and that one.I hope you will keep on your nice work my brother!sorry for my poor English!
@RaymanFX CM-11.0 | OpenSEMC development thread is strictly for development purpose only, so unless you have a proper log of your problem do not post there...
Here is a
OpenSEMC Discussion & Help Thread
Click to expand...
Click to collapse
for discussing any problem and their solutions.
Let the discussion begin
___________________________
Download link to latest build : http://d-h.st/new
___________________________
MAIN THREAD REOPENED
KINDLY DON'T POST ANYTHING IRRELEVANT THERE NOW
____________________________
FREQUENTLY ASKED QUESTIONS
BY : @bamboohao
http://forum.xda-developers.com/showthread.php?p=49264199
____________________________________
NEED SOME HELP !?!
CONTACT : @Great_Geek (http://forum.xda-developers.com/showpost.php?p=49999194&postcount=329)
_________________________
P.S : If any one has helped and/or can help out people here, please PM me i'll link them in the OP.
As about mediaserver draining battery in alpha 1, there's a quick fix..
The problem is in LPA support, so to disable it you should change in build.prop:
lpa.decode=true to false.
Worked for me..
Kefir.net said:
As about mediaserver draining battery in alpha 1, there's a quick fix..
The problem is in LPA support, so to disable it you should change in build.prop:
lpa.decode=true to false.
Worked for me..
Click to expand...
Click to collapse
Surely try this and report back.. Thanks anyways
Sent from my Xperia S using Tapatalk
Frequently asked questions
Here are the frequently asked questions : http://forum.xda-developers.com/showthread.php?p=49264199
I have problem with this and Android 4.3+ ROMs.
It works fine but after reboot it stucks on OpenSEMC logo.
I found that backup and restore /data makes it work but only until another reboot.
Do anybody have solution for this?
PanSernik said:
I have problem with this and Android 4.3+ ROMs.
It works fine but after reboot it stucks on OpenSEMC logo.
I found that backup and restore /data makes it work but only until another reboot.
Do anybody have solution for this?
Click to expand...
Click to collapse
You did a clean install or dirty...?
I always do clean install and never had a problem like this..
Sent from my Xperia S using Tapatalk
Saurav16 said:
You do a clean install or dirty...
I always do clean install and never had a problem like this..
Click to expand...
Click to collapse
I did. I flashed boot.img via fastboot, wipe system, data, cache and dalvik cache and then flashed ROM and gapps.
holo use kernel raymanFX?!
http://android.zone.it.sohu.com/thread-11932212-1-1.html
dieselman6969 said:
holo use kernel raymanFX?!
http://android.zone.it.sohu.com/thread-11932212-1-1.html
Click to expand...
Click to collapse
Yup...
Sent from my Xperia S using Tapatalk
Saurav16 said:
Yup...
Sent from my Xperia S using Tapatalk
Click to expand...
Click to collapse
they could work together
PanSernik said:
I did. I flashed boot.img via fastboot, wipe system, data, cache and dalvik cache and then flashed ROM and gapps.
Click to expand...
Click to collapse
Second reboot takes longer time on Semc logo. It is as long as ~15 mins.
So I suggest you to wait for sometime. If it is working fine once, there is no reason it should'nt boot second time.
dieselman6969 said:
they could work together
Click to expand...
Click to collapse
Raymanfx already has a very nice team and that guy/team is Chinese so I don't think that would be possible...
Moreover I think they are just taking rayman's work /rom and sharing it there...
Sent from my Xperia S using Tapatalk
dieselman6969 said:
they could work together
Click to expand...
Click to collapse
Holo is just Rayman's sources compiled by a Chinese guy. So they are working together in a way, but it's a one way street. Could've read the Holo thread, the first 2 pages make this clear.
Redstarr1 said:
Holo is just Rayman's sources compiled by a Chinese guy. So they are working together in a way, but it's a one way street. Could've read the Holo thread, the first 2 pages make this clear.
Click to expand...
Click to collapse
any chance for camera on cm-11 record at 1080p?!
dieselman6969 said:
any chance for camera on cm-11 record at 1080p?!
Click to expand...
Click to collapse
1080p recording is working fine in CM11..
sudhindrakv said:
1080p recording is working fine in CM11..
Click to expand...
Click to collapse
can you post some images about cm-11
Is someone else facing lag when pulling down the notification bar? I mean its not as smooth as CM10.2 for me
codename__47 said:
Is someone else facing lag when pulling down the notification bar? I mean its not as smooth as CM10.2 for me
Click to expand...
Click to collapse
There's already a bug report here: http://forum.xda-developers.com/devdb/project/?id=1876#bugReporter
rumkugel13 said:
There's already a bug report here: http://forum.xda-developers.com/devdb/project/?id=1876#bugReporter
Click to expand...
Click to collapse
There must be some issue with the system theme coz installing another theme fixed it for me
codename__47 said:
There must be some issue with the system theme coz installing another theme fixed it for me
Click to expand...
Click to collapse
For Me too
Sent from my Xperia S using Tapatalk
Yo Guys....From Past Few Days We got some awesome development for our Little Beast Redmi1s but its seem only for Cm11 R15....
So i dig a little and you know what i found
How to flash :
1.First Install your desire rom, gapps etc
2.Reboot...
3.Complete The Setup..... Once you got on home screen then
4.Boot in Recovery....
5.Flash Patch....
6.Flash The Your Favorite Kernel
7.Reboot
Note : Step 1 to 3 is optional but it recommended
Download Link :
Kernel_Compatibility_Patch (updated)
Mirror
Miui forumers just don't copy and past there.....attach Xda link too
I m on carbon using BeastKernel
khan_frd2002 said:
I m on carbon using BeastKernel
Click to expand...
Click to collapse
Bro hats off to you
smustafasms said:
Bro hats off to you
Click to expand...
Click to collapse
thank you bro...:good:
khan_frd2002 said:
I m on carbon using BeastKernel
Click to expand...
Click to collapse
Hows the battery and performance? Which recovery did use, if twrp then which version?
Great Work Bro
Sent from my Redmi 1S using XDA Premium 4 mobile app
Hey ,khan_frd2002 is your wifi turning on?
My wifi is not turning on after flashing the kernel and patch????
Mine too...
Wifi not working on crDroid rom
Else everything is working.
har****181 said:
Hey ,khan_frd2002 is your wifi turning on?
My wifi is not turning on after flashing the kernel and patch????
Click to expand...
Click to collapse
Eziogamer said:
Mine too...
Click to expand...
Click to collapse
CHETANN.5 said:
Wifi not working on crDroid rom
Else everything is working.
Click to expand...
Click to collapse
ohh sorry the kernel use new wifi drivers that why not working....
wait will upload new one with wifi drivers
edit : anyone try this and conform wifi working or not
download from here
khan_frd2002 said:
ohh sorry the kernel use new wifi drivers that why not working....
wait will upload new one with wifi drivers
Click to expand...
Click to collapse
Hey thanks for the patch nd replying fast... Will u be able to do it today.?
khan_frd2002 said:
ohh sorry the kernel use new wifi drivers that why not working....
wait will upload new one with wifi drivers
Click to expand...
Click to collapse
Cool mate and thanks for kernel Compatibility
Eziogamer said:
Hey thanks for the patch nd replying fast... Will u be able to do it today.?
Click to expand...
Click to collapse
yeah added new one...check op and report back it working or not
Hope You Also Add Compatibility To Stock MIUI v5
Awesome Work Bro..Hope you can also add compatibility to MIUI v5 v45/v47 roms
khan_frd2002 said:
I m on carbon using BeastKernel
Click to expand...
Click to collapse
khan_frd2002 said:
ohh sorry the kernel use new wifi drivers that why not working....
wait will upload new one with wifi drivers
edit : anyone try this and conform wifi working or not
download from here
Click to expand...
Click to collapse
unable to flash new zip file
khan_frd2002 said:
yeah added new one...check op and report back it working or not
Click to expand...
Click to collapse
Hey thanks man for your hard work bt the second build is not getting flashed.. . In twrp its showing cannot open zip file, or something like that
Hsmetric181 said:
unable to flash new zip file
Click to expand...
Click to collapse
Eziogamer said:
Hey thanks man for your hard work bt the second build is not getting flashed.. . In twrp its showing cannot open zip file, or something like that
Click to expand...
Click to collapse
its seem corrupt upload.....sorry
new one is here
http://d-h.st/wpFL
Nope,still wifi doesn't work
Sent from my Redmi 1S using XDA Free mobile app
Hsmetric181 said:
Nope,still wifi doesn't work
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
try onething for me bro....
use any root explorer...
go to system/lib/modules folder
then delete whole pronto folder.....
then install kernel patch v2
khan_frd2002 said:
try onething for me bro....
use any root explorer...
go to system/lib/modules folder
then delete whole pronto folder.....
then install kernel patch v2
Click to expand...
Click to collapse
Wifi still not turning on...
And ya im also using Carbon Rom with Beast kernel.
But why is the vibration intensity increases a lot....??
Thanks...
reposting in a hurry and no time to reupload on english site, anyone else feel free to reupload for me, but i want to benefit all F240x users who's left in the dark with all the E980 updates
Here's 2 roms by Wangsai008 with updated kernels on 5.0.2 to work, took me long time to find as he is a clever yet mystery man who updates on completely different sites each time he posts roms, you need to know Chinese rather well to even search for it.
CM12 (based on 2/2/2015 nightly) unofficial F240x with updated kernel
Password: y781
http://pan.baidu.com/share/link?shareid=1474619366&uk=1392791443
Mokee - variant of CM12 with more customisation, updated 3/2/2015 on the existing one on this forum for all F240x
Password: a6kh
http://pan.baidu.com/share/link?shareid=1531163643&uk=1392791443
click on the top where it says size of the zip file, then click on right button on the pop up to download
any 5.0 lollipop Gapps will work fine so i wont post links, i prefer minimal gapps
anyone can also try to rip the Kernel out and try it on other E980 roms
how to download without password?
wats the password ....
This file can not be downloaded. Please review the instructions for downloading.
Thanks and regards
sorry my bad, updated password
thanks for the password
Downloading..... will update after install.
great man, thnx for bringing us the light while wondering . i'm on it testing and every other tweaks suggestions(or you guys) .. my heartiest appreciations
no music and ringtones and dosen't deep sleep at all. tried every workaround knwn.. please help if anyone can suggest. it can play youtube with sound and call sound and mic is ok. ( both rom) mine is F240 K
Thanks for the rom.
The new kernel does not seem to work well with the SistemUI of CM rom after the 2 February 2015.
Let's wait the user Wangsai008 change your kernel or rom to later dates.
Thanks
ulises55 said:
Thanks for the rom.
The new kernel does not seem to work well with the SistemUI of CM rom after the 2 February 2015.
Let's wait the user Wangsai008 change your kernel or rom to later dates.
Thanks
Click to expand...
Click to collapse
use the updated f240 kernel solves systemUI error
stapler85 said:
use the updated f240 kernel solves systemUI error
Click to expand...
Click to collapse
Thank you, with the new 2.8 kernel seems to work well
Thanks
ulises55 said:
Thank you, with the new 2.8 kernel seems to work well
Thanks
Click to expand...
Click to collapse
does anyone having media issues like i said no music. no ringtones(no deep sleep too). any suggestions guys ?
mine is F240k
really annoying
any one facing randomly working wifi problem
having this problem on every cm12 rom on f240L
sure this one too
007_Fahad said:
any one facing randomly working wifi problem
having this problem on every cm12 rom on f240L
sure this one too
Click to expand...
Click to collapse
What do you mean ?
Sent from my LG-F240L using Tapatalk
irt118 said:
What do you mean ?
Sent from my LG-F240L using Tapatalk
Click to expand...
Click to collapse
WiFi not working after reboot..!! Plx help device: F240L! WiFi keep on searching..!! First time worked well..!!
007_Fahad said:
WiFi not working after reboot..!! Plx help device: F240L! WiFi keep on searching..!! First time worked well..!!
Click to expand...
Click to collapse
i flash Crdroid with update kernel on f240l and evevrything work well here
Sent from my LG-F240L using Tapatalk
irt118 said:
i flash Crdroid with update kernel on f240l and evevrything work well here
Sent from my LG-F240L using Tapatalk
Click to expand...
Click to collapse
Crdroid?? is this a rom?? please post link and kernel too
007_Fahad said:
Crdroid?? is this a rom?? please post link and kernel too
Click to expand...
Click to collapse
You can find both rom and kernel here
Sent from my LG-F240L using Tapatalk
ecrum said:
does anyone having media issues like i said no music. no ringtones(no deep sleep too). any suggestions guys ?
mine is F240k
Click to expand...
Click to collapse
for deep sleep: Choose ondemand for CPU performance
bye
bye
Reserved
Thanks Jo-san
I donwload
What kind of battery optimizations did you implement ?
puppetmaster22 said:
Thanks Jo-san
I donwload
Click to expand...
Click to collapse
you re welcome
JakobiE said:
What kind of battery optimizations did you implement ?
Click to expand...
Click to collapse
deep sleep tweaks
Flash internal memory is recommanded? I have not done that
i flash supersu at first and after rom,if i flash at first rom i have a error
puppetmaster22 said:
Flash internal memory is recommanded? I have not done that
i flash supersu at first and after rom,if i flash at first rom i have a error
Click to expand...
Click to collapse
yes you need to follow my steps..you should be on root before flashing..and following my steps...wipe internal too. than flash rom and after flash again supersu
Thanks bro!!
Thanks a lot!
insestito said:
Thanks bro!!
Thanks a lot!
Click to expand...
Click to collapse
you re welcome
Jo-san said:
yes you need to follow my steps..you should be on root before flashing..and following my steps...wipe internal too. than flash rom and after flash again supersu
Click to expand...
Click to collapse
I don't follow your steps and rom working good
More than 4,5 hours of battery life with this ROM?
Thanks
puppetmaster22 said:
I don't follow your steps and rom working good
Click to expand...
Click to collapse
a deep clean is suggestsed..it gives to you a clean performant rom
insestito said:
More than 4,5 hours of battery life with this ROM?
Thanks
Click to expand...
Click to collapse
i ve made 5 hours of screen personally
Perfect at the moment
thanks, do you plan for the next Update a new base like 5.10.8 ?
reflex9000 said:
thanks, do you plan for the next Update a new base like 5.10.8 ?
Click to expand...
Click to collapse
you are welcome
insestito said:
Perfect at the moment
Click to expand...
Click to collapse
of course..but 5.9.18 actully is more stable than 5.10.8...I will change when I will have a goof feedback about new releases
please, leave me a thanks to the first post at the beginnin'
Always when I used the miui 7 ROMs, I had the problem that sometimes after a day of use, the device just didn't wake up after pressing the lock button. The buttons are showing light but I couldn't use the device until I swapped out the battery. Does someone of you have the same problem?
And I was wondering if this happens with this rom as well.
I have the same problem ~1-2 times a day....I haven't tried out with this rom, will do it later this day :thumbup:
JakobiE said:
Always when I used the miui 7 ROMs, I had the problem that sometimes after a day of use, the device just didn't wake up after pressing the lock button. The buttons are showing light but I couldn't use the device until I swapped out the battery. Does someone of you have the same problem?
And I was wondering if this happens with this rom as well.
Click to expand...
Click to collapse
i have the same problem on the official miui 7 5.9.18, when i will install this "deer", i will check it.
dexter_39 said:
i have the same problem on the official miui 7 5.9.18, when i will install this "deer", i will check it.
Click to expand...
Click to collapse
Thanks a lot !