Develop Bugs

Battery Issue - Missing Dependency, ChargAlg not loading

I know there are multiple threads on the Red-Light/0% battery issue but they seem to be getting lost in the noise..
I have tried all options on the various forums, this is a last ditch attempt to see if there is anyone out there with knowledge of the inner workings of the ROM.
I am presently running stock UK 2.3.3, I've dumped the bug log using ADB and searched through the file for relevant info. Here is what I found. If anyone can identify what dependency is missing and how to rectify it I am sure there would be a lot of grateful people
09-25 20:41:21.983 D/kernel ( 128): [ 116.619567] chargalg chargalg: Trying external again...
[persist.chargemon.active]: [1]
<4>[ 5.813049] Please check boot accessing charger (want 0x50, got 0xac) ***
<6>[ 6.620086] *********** Charger Type: HOST PC
<6>[ 6.620086]
<7>[ 6.695220] yaffs: yaffs_read_super: is_checkpointed 0
<6>[ 6.738677] yaffs: dev is 32505856 name is "mtdblock0" rw
<6>[ 6.738800] yaffs: passed flags ""
<7>[ 6.738861] yaffs: yaffs: Attempting MTD mount of 31.0,"mtdblock0"
<6>[ 6.777648] msm_hsusb msm_hsusb: reset
<6>[ 6.777740] <6>[ 6.777770] Charger Type: STD DOWNSTREAM PORT
<6>[ 6.777954] chargalg chargalg: Trying external again...
<6>[ 6.778076] bq24185 0-006b: Turning on charger. USB-Host mode
<6>[ 6.778167] bq24185 0-006b: Set init values
<6>[ 6.778991] bq24185 0-006b: Disabling charger
<6>[ 6.779937] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH <6>[ 6.780700] bq24185 0-006b: Set safety timer to disable
<6>[ 6.783172] bq24185 0-006b: Setting charger voltage to 4200 mV
<6>[ 6.784423] bq24185 0-006b: Setting charger current to 1050 mA
<6>[ 6.784942] bq24185 0-006b: Enabling charger
<7>[ 6.946197] yaffs: yaffs_read_super: is_checkpointed 1
<6>[ 6.981475] android_usb gadget: high speed config #1: android
<6>[ 6.981811] chargalg chargalg: Trying external again.
09-25 20:39:50.703 D/lights ( 264): set_light_battery: color=0xffff0000, mode=0
09-25 20:39:49.783 I/battery_status( 264): [2,2,1,2,Li-poly]
09-25 20:39:49.783 I/battery_level( 264): [0,0,260]
09-25 20:39:55.883 I/battery_level( 264): [0,0,270]
[ro.semc.batt.capacity]: [1500]
[ro.semc.batt.test.min_level]: [70]
[ro.semc.batt.test.z_threshold]: [50]
<6>[ 2.963928] semc_battery_data semc_battery_data: probe
<6>[ 5.815582] chargalg chargalg: Registering battery charging algorithm driver
<6>[ 5.822326] chargalg chargalg: Trying external again...
<6>[ 10.148376] bq24185 0-006b: Setting input charger current to 500 mA
<6>[ 10.149200] bq24185 0-006b: Enabling charger
<6>[ 10.460510] chargalg chargalg: Trying external again...
<6>[ 12.468994] chargalg chargalg: Trying external again...
<item name="android.permission.BATTERY_STATS" package="android" />
<item name="android.permission.BATTERY_STATS" />
* ReceiverList{2b28b830 264 system/1000 local:2b0911e0}
app=ProcessRecord{2b006510 264:system/1000} pid=264 uid=1000
Filter #0: BroadcastFilter{2b28b888}
Action: "android.intent.action.BATTERY_CHANGED"
DUMP OF SERVICE battery:
Current Battery Service state:
AC powered: false
USB powered: true
status: 2
health: 2
present: true
level: 0
scale: 100
voltage:0
temperature: 270
technology: Li-poly
DUMP OF SERVICE batteryinfo:
Battery History:
-32m32s627ms START
-32m25s458ms 000 60030003 status=charging health=good plug=usb temp=280 volt=0 +plugged +screen +wake_lock +sensor brightness=light
Permission [android.permission.BATTERY_STATS] (2b0d7820):
sourcePackage=android
uid=1000 gids=[] type=0 prot=0
packageSetting=PackageSetting{2afd9030 android/1000}
perm=Permission{2b10dc60 android.permission.BATTERY_STATS}
SharedUser [android.uid.system] (2b01d670):
userId=1000 gids=[3002, 3001, 3003, 1015, 1007]
grantedPermissions:
android.permission.BATTERY_STATS

thanks for the info maybe now one of the devs can figure it out. this is the best info ive seen so far on the issue

[Q] USB HOST mode in ICS (android 4.x)

I need to power a USB device and communicate with it.
The Android 4.x documentation states that ICS has USB HOST enabled thus allowing other devices connected through USB to the phone, to be discovered/powered...
I have a Desire Z with ICS 4.01 from here: http://forum.xda-developers.com/showthread.php?t=1374927
Is the current ICS alpha USB host enabled?
Thanks

It is my understanding that the USB host isn't working at this time on this ROM.

Thanks,
I thought this IS the default setting in ICS.
Hope it will be out there soon

Usb host function needs hardware support as well. It should be supported by both SOC and the board. I doubt that our hardware included necessery components. sorry.

I'm using MDJ (virtuous?) ICS (4.0.3) and it worked out of the box
Perhaps you could try that one if USB storage is important for you.
EDIT: I misread, sorry! Not sure if USB hosting works with MDJ's rom, haven't tried that.

check this mate
http://forum.xda-developers.com/showthread.php?t=1398493 dont think it will be much help though, we need devs

I was wandering if it could be something similar to how you can enable USB HOST mode in XOOM...
Search for
enable-usb-host-mode-ie-thumb-drives-on-the-xoom
I tried my app both in aosp and in an official nexus s (ICS) at no avail...
Any other thoughts?
Found out more...
Has anyone seen this?
HOWTO: Compile USB Host Enabled Kernel for the G1/Dream
w w w .cs.fsu.edu/~baker/devices/projects/framik/USB-HOST-Kernel.txt
It should be similar to our device, right?

I tried another thing...
I purchased a USB On-The-Go cable, thinking that when connecting my external usb sensor to the phone it will signal the phone to enter USB Host mode.
No luck.
The phone does notice the cable and ICS enters "car mode" (remember that driving wheel icon " it shows on the status bar...)
Is this a step forward or a kick in the but?

dmsgs output when USB OTG cable is plugged in.
<6>[ 4602.157348] [USB] hsusb: ONLINE -> OFFLINE
<6>[ 4602.157592] [USB] handle_notify_offline: notify offline
<6>[ 4602.170227] [USB] lpm enter
<6>[ 4602.170623] [USB] usb_suspend_phy
<6>[ 4602.181701] [USB] send connect type 0
<6>[ 4603.584014] [USB] msm_hsusb: disable pullup
<6>[ 4603.596923] [USB] msm_hsusb: enable pullup
<6>[ 4604.816955] [USB] msm_hsusb: disable pullup
<6>[ 4604.837097] [USB] msm_hsusb: enable pullup
<6>[ 4670.716400] [USB] id interrupt
<6>[ 4670.816864] [USB] carkit_detect: usb ID pin = 0
<6>[ 4670.817138] [USB] lpm exit
- I have no car kit!
<6>[ 4670.926910] [USB] carkit inserted
<6>[ 4670.939697] [USB] carkit: set state 2
<6>[ 4670.940094] [USB] lpm enter
<6>[ 4670.940765] [USB] usb_suspend_phy
<6>[ 4702.414123] [USB] id interrupt
<6>[ 4702.516906] [USB] carkit_detect: usb ID pin = 1
<6>[ 4702.517028] [USB] carkit removed
<6>[ 4702.536956] [USB] carkit: set state 0
<6>[ 4718.810180] [USB] msm_hsusb_set_vbus_state: 1
<6>[ 4718.810211] [USB] hsusb: OFFLINE -> ONLINE
<6>[ 4718.810211] [USB] lpm exit
<6>[ 4718.811340] [USB] hsusb: reset controller
<6>[ 4718.997253] [USB] ulpi: write 0x06 to 0x36
<6>[ 4718.997253] [USB] ulpi: write 0x0c to 0x31
<6>[ 4718.997283] [USB] ulpi: write 0x31 to 0x32
<6>[ 4718.997283] [USB] ulpi: write 0x01 to 0x0d
<6>[ 4718.997283] [USB] ulpi: write 0x01 to 0x10
<6>[ 4718.997314] [USB] handle_notify_offline: notify offline
<6>[ 4718.997344] [USB] msm_hsusb: enable pullup
<6>[ 4719.000366] [USB] suspend
<6>[ 4719.016998] [USB] not AC charger
<6>[ 4719.114501] [USB] reset
<6>[ 4719.114624] [USB] send connect type 1
<6>[ 4719.116790] [USB] portchange USB_SPEED_HIGH
<6>[ 4719.311889] [USB] reset
<6>[ 4719.314178] [USB] portchange USB_SPEED_HIGH
I WANT USB HOST! WAAAAAAAAAAAAAAAAAAA....!

Found more info here
http://forum.xda-developers.com/showthread.php?t=702742&page=17
Might need to apply the patch to the ICS kernel if not already included

Need to find how to get/patch/build the kernel...

great, im not alone with the need of usb host!
as i referred to in this thread -
see: Nexus One USB host mode driver
and youtube videos:
USB host mode on the HTC Desire
Nexus One USB host mode
this way i tried compiling a new kernel with usb host mode in kernel config, but i wasnt able to boot it up...(stucks at htc logo)
im not sure what im doing wrong cause i didnt figure out how to get the bootloader output, maybe im missing the ramdisk..
my linux knowledge doesnt seem to suffice (yet ) for android devices to do development stuff, so im hoping the devs enable usb host mode in another rom-update

Wow! Somebody is interested in USB Host beside me!
Andromadus Alpha v9 now lists USB - UMS.
Could this be IT or is this the feature available only to devices with removable storage card slots?

xperia arc has it
I convinced a colleague to let me try his phone and with the USB OTG cable I bought I've been able to connect a mouse to the phone and click on the icons and also connect my work desktop keyboard to the phone and type like crazy in an edit field...
Thinking about switching...

So here upping the thread, usb host has (probably) been done on G2, but don't get too excited. At the time of the sdk ICS port OdienmanSam (sorry if it's not right spelt), managed to get it to work, if I remember well, as he has deleted all his posts. I've tried to MP him, but no luck. We may contact the devs, I'll do it with Andromadus devs.

Usb host in ICS
I can confirm that
Andromadus Alpha 10
Virtuous Quattro rc 1,2,3
Virtuouw Quattro beta 8,9
all doesn't support usb host with an usb otg cable.
They're all getting the carkitmode

Problem in USB HOST MODE
I am developing application to detect my printer by NOVO 7 Paladin(Android 4.0).
By USB HOST CONTROLLER application(which is available in market) the printer/mouse/keyboard is detected. But in my application(Written in java) these devices are not detected
With the reference of below link this application is developed
developer.android.com/guide/topics/usb/host.html
My Code Sample
mUsbManager = (UsbManager)getSystemService(Context.USB_SERVICE);
HashMap<String, UsbDevice> foundDevices = mUsbManager.getDeviceList();
Iterator<UsbDevice> iterator = foundDevices.values().iterator();
if (foundDevices.size()>0)
{String old = textv.getText().toString();
textv.setText(old +" foundDevices ");
}

The USB-HOST API Solution
Hello Camaradas
I've been searching a lot for this, and couldn't find it. But thanks to all the people who have spent a few moments answering our questions, and the wiki resources on the web I figured it out. So I would do the same in bring back.
There are some missing files in some android builds, like the AINOL NOVO 7 PALADIN. I think this would work in any ICS tablet with the same issue. I understand that the Galaxy Tab has the same issue but I'm not sure, I don't have one but if you do, let me know if it work.
So lets push the files in and see how it goes.
>==================================================================<
Copy some missing files into system drive.
$ adb remount
$ adb push AINOL_FIX/system/etc/permissions/android.hardware.usb.host.xml /system/etc/permissions
$ adb push AINOL_FIX/system/etc/permissions/android.hardware.usb.accessory.xml /system/etc/permissions
NOTE: If an error appears displaying Out of Memory, it's right and you must delete some files from system drive. I recommend some live wallpapers from system/app.
>==================================================================<
I understand that for writing system drive you should have root access, I already had it when I did this so if it doesn't work, root it.
You can get the files from android source builds or from a tablet where USB-HOST API is actually working. I got them from linaro's ICS build for pandaboard.
Let me know when you have your USB-HOST API working.

Archos G9 3G Stick usb dongle

Hi,
does anyone have the 3G Stick from Archos?
I looked around the /system an found some info about three Alcatel 3G Sticks x200, x020 and x060 i think. Now i have an Alcatel x200 from Wind Italy and i saw in console from lsusb command that the usbmodemswitch switches the Alcatel to modem mode (1bbb:f000 becomes 1bbb:0000 - in dmesg and lsusb) but does not assing an tty#. Nothing about assigning a tty# in dmesg.
I have the Archos 80G9 with 3.2.80 custom by surdu_petru.
Another problem i saw with all the rooted firmware was that the 3G port is always on. The 3G switch doesn't do anything anymore.

Hi x3ss
It seems from looking at the source to the UsbKeyManager.apk that they are assigned to ttyHS3 and ttyHS4 provided you have a compatible key.
Interestingly they also hardcoded the Vendor and Product id in the code.
I wouldn't mind a look at your dmesg, if you have the time to post It

I'll post dmesg tonight when i get home.
One thing for sure, there is no ttyHS# in /dev/ and no other new tty is created when i plung in the 3G stick and turn it on. In dmesg it just says that the stick has switched to modem mode.
Here is my dmesg after boot and after i plug usb
Code:
or DEV_WATCHDOG_ERROR event in SysM3
<6>[ 5.814636] Registered user-space process for DEV_SYS_ERROR event in AppM3
<6>[ 5.814666] Registered user-space process for DEV_WATCHDOG_ERROR event in AppM3
<6>[ 12.713653] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<4>[ 13.024749] mma8453q_ctrl_ioctl: Get mode 1
<6>[ 14.825561] Sleep APPM3
<6>[ 14.825714] Sleep SYSM3
<5>[ 20.154418] CPU1: shutdown
<4>[ 20.802001] CPU1: Booted secondary processor
<5>[ 22.021514] CPU1: shutdown
<4>[ 33.325469] SOC timeout
<4>[ 40.271514] CPU1: Booted secondary processor
<5>[ 43.841918] CPU1: shutdown
<4>[ 48.537414] CPU1: Booted secondary processor
<5>[ 51.170013] CPU1: shutdown
<4>[ 52.729492] CPU1: Booted secondary processor
<5>[ 60.701080] CPU1: shutdown
<4>[ 66.936614] CPU1: Booted secondary processor
<6>[ 68.301696] TIWLAN: driver init
<6>[ 68.302337] TI WiLink 1283 SDIO: Driver loaded
<6>[ 68.305664] wifi_probe: got wlan irq 262
<6>[ 68.305694] wifi_probe: got wlan irq trigger falling flag
<4>[ 68.306610] wl1271_wifi_set_carddetect: 0
<7>[ 68.306640] mmc2: card_present 0
<4>[ 68.306640] wl1271_wifi_reset: 1
<4>[ 68.306671] wl1271_wifi_power: 0
<6>[ 68.705993] TIWLAN: 1562.815298: pInitParams->RoamingScanning_2_4G_enable 0
<4>[ 68.706115] wl1271_wifi_power: 1
<4>[ 68.721038] wl1271_wifi_power: 0
<4>[ 68.721984] wl1271_wifi_power: 1
<4>[ 68.790435] wl1271_wifi_reset: 0
<4>[ 68.790435] wl1271_wifi_set_carddetect: 1
<7>[ 68.790466] mmc2: card_present 1
<4>[ 69.049804] mmc2: card claims to support voltages below the defined range. These will be ignored.
<6>[ 69.060577] mmc2: new SDIO card at address 0001
<6>[ 69.067291] TIWLAN: Found TI/WLAN SDIO controller (vendor 0x97, device 0x4076, class 0x7)
<4>[ 69.067382] sdioAdapt_ConnectBus(): Block-Size should be bigger than SYNC_ASYNC_LENGTH_THRESH!!
<6>[ 69.067718] TIWLAN: 1563.177023: Working on a 1273 PG 2.0 board.
<6>[ 69.067749] TIWLAN: 1563.177054: CHIP VERSION... set 1273 chip top registers
<6>[ 69.068389] TIWLAN: 1563.177695: XTAL 38.4 MHz configured for COM6
<6>[ 69.068572] TIWLAN: 1563.177847: Starting to process NVS...
<6>[ 69.068572] TIWLAN: 1563.177878: NVS found, EEPROM Image addr=0xc2563400, EEPROM Len=0x0x1d4
<6>[ 69.089874] TIWLAN: 1563.199179: Firmware successfully downloaded.
<6>[ 69.089904] TIWLAN: 1563.199209: FW download OK...
<6>[ 69.095275] TIWLAN: 1563.204550: Firmware successfully downloaded.
<6>[ 69.095275] TIWLAN: 1563.204580: FW download OK...
<6>[ 69.095489] TIWLAN: 1563.204794: Firmware successfully downloaded.
<6>[ 69.095520] TIWLAN: 1563.204825: FW download OK...
<6>[ 69.097351] TIWLAN: 1563.206656: Firmware successfully downloaded.
<6>[ 69.097381] TIWLAN: 1563.206656: FW download OK...
<6>[ 69.098358] TIWLAN: 1563.207632: Firmware successfully downloaded.
<6>[ 69.098358] TIWLAN: 1563.207663: FW download OK...
<6>[ 69.098907] TIWLAN: 1563.208212: Finished downloading firmware.
<6>[ 69.098937] TIWLAN: 1563.208243: Firmware running.
<6>[ 69.126007] TIWLAN: 1563.235281: Firmware successfully downloaded.
<6>[ 69.126037] TIWLAN: 1563.235342: FW download OK...
<6>[ 69.126190] TIWLAN: 1563.235464:
<6>[ 69.126190] TIWLAN: 1563.235495: --------------------------------------------------------------------
<6>[ 69.126220] TIWLAN: 1563.235525: Driver Version : MCP-WiLink_Driver_2.5.3.0.18
<6>[ 69.126251] TIWLAN: 1563.235556: Firmware Version: Rev 6.1.3.11.54
<6>[ 69.126281] TIWLAN: 1563.235556: Station ID : 00-16-DC-69-5E-4D
<6>[ 69.126281] TIWLAN: 1563.235586: --------------------------------------------------------------------
<6>[ 69.126312] TIWLAN: 1563.235617:
<6>[ 69.143981] TIWLAN: 1563.253256: Interrogate TX/RX parameters
<6>[ 69.345825] request_suspend_state: wakeup (3->0) at 69739074708 (2012-02-13 16:56:47.646331788 UTC)
<3>[ 69.348541] init: untracked pid 2262 exited
<7>[ 69.351440] omap_pwm_led_set: brightness: 77
<7>[ 69.351470] omap_pwm_led_set_pwm_cycle: cycle: 77
<4>[ 69.354370] mma8453q_ctrl_ioctl: Set polling delay 0
<4>[ 69.355987] mma8453q_ctrl_ioctl: Set polling delay 200
<4>[ 69.358428] mma8453q_ctrl_ioctl: Set polling delay 60
<7>[ 69.437561] usb usb1: usb auto-resume
<3>[ 69.437622] USB_EHCI resuming
<3>[ 69.438018] Resuming platform bus
<3>[ 69.663574] Phy is now ON
<3>[ 69.772796] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x1860000
<3>[ 69.772949] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x1C40041
<3>[ 69.773132] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x1C40040
<3>[ 69.773345] uhhtll-omap uhhtll-omap: USB interrupt rising = 1F
<3>[ 69.773468] uhhtll-omap uhhtll-omap: USB interrupt falling = 1F
<3>[ 69.773590] uhhtll-omap uhhtll-omap: USB interrupt status = 4
<3>[ 69.773773] uhhtll-omap uhhtll-omap: USB interface status = 10
<3>[ 69.773895] uhhtll-omap uhhtll-omap: USB debug status = 0
<3>[ 69.774108] uhhtll-omap uhhtll-omap: Scratch register = 0xCA - should be 0xCA
<7>[ 69.774139] ehci-omap ehci-omap: resume root hub
<7>[ 69.819671] hub 1-0:1.0: hub_resume
<7>[ 69.820068] usb usb2: usb auto-resume
<7>[ 69.820129] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
<7>[ 69.843109] hub 2-0:1.0: hub_resume
<7>[ 69.843353] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
<6>[ 69.944091] ADDRCONF(NETDEV_UP): tiwlan0: link is not ready
<6>[ 71.555786] ADDRCONF(NETDEV_CHANGE): tiwlan0: link becomes ready
<7>[ 72.591308] hub 1-0:1.0: hub_suspend
<7>[ 72.591369] usb usb1: bus auto-suspend
<7>[ 72.591369] ehci-omap ehci-omap: suspend root hub
<3>[ 72.592224] USB EHCI suspending
<7>[ 72.609161] hub 2-0:1.0: hub_suspend
<7>[ 72.609222] usb usb2: bus auto-suspend
<6>[ 74.561950] TIWLAN: 1568.671255: conn , CONSOLE:-------------------------------------
<6>[ 74.562011] TIWLAN: 1568.671316: conn , CONSOLE: CONN LOST
<6>[ 74.562042] TIWLAN: 1568.671347: conn , CONSOLE:-------------------------------------
<6>[ 74.562072] TIWLAN: 1568.671377: -------------------------------------
<6>[ 74.562072] TIWLAN: 1568.671377: CONN LOST
<6>[ 74.562103] TIWLAN: 1568.671408: -------------------------------------
<6>[ 76.553558] TIWLAN: 1570.662832: connInfra , CONSOLE:************ NEW CONNECTION ************
<6>[ 76.553588] TIWLAN: 1570.662893: ************ NEW CONNECTION ************
<6>[ 76.553619] TIWLAN: 1570.662924: siteMgr , CONSOLE:-- BSSID = 74-ea-3a-c0-e2-a2
<6>[ 76.553649] TIWLAN: 1570.662955: -- SSID = ganja-ap
<6>[ 76.553680] TIWLAN: 1570.662985: -- BSSID = 74-ea-3a-c0-e2-a2
<6>[ 76.553680] TIWLAN: 1570.662985: -- MODE = infrastructure
<6>[ 76.553710] TIWLAN: 1570.663016: connInfra , CONSOLE:****************************************
<6>[ 76.553741] TIWLAN: 1570.663046: ****************************************
<3>[ 78.096923] init: untracked pid 2573 exited
<7>[ 82.091094] tiwlan0: no IPv6 routers present
<3>[ 84.204711] init: untracked pid 2755 exited
<3>[ 84.205657] init: untracked pid 2745 exited
<5>[ 84.595092] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
<3>[ 84.595153] CIFS VFS: Send error in SessSetup = -13
<3>[ 84.595184] CIFS VFS: cifs_mount failed w/return code = -13
<5>[ 84.634674] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
<3>[ 84.634735] CIFS VFS: Send error in SessSetup = -13
<3>[ 84.634765] CIFS VFS: cifs_mount failed w/return code = -13
<5>[ 84.731628] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
<3>[ 84.731719] CIFS VFS: Send error in SessSetup = -13
<3>[ 84.731811] CIFS VFS: cifs_mount failed w/return code = -13
<5>[ 108.865356] CPU1: shutdown
<3>[ 205.828460] USB_EHCI resuming
<3>[ 205.829620] Resuming platform bus
<3>[ 206.052398] Phy is now ON
<3>[ 206.161804] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x18600CA
<3>[ 206.161987] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x1C40041
<3>[ 206.162231] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x1C40040
<3>[ 206.162475] uhhtll-omap uhhtll-omap: USB interrupt rising = 1F
<3>[ 206.162658] uhhtll-omap uhhtll-omap: USB interrupt falling = 1F
<3>[ 206.162811] uhhtll-omap uhhtll-omap: USB interrupt status = 4
<3>[ 206.163055] uhhtll-omap uhhtll-omap: USB interface status = 10
<3>[ 206.163208] uhhtll-omap uhhtll-omap: USB debug status = 1
<3>[ 206.163452] uhhtll-omap uhhtll-omap: Scratch register = 0xCA - should be 0xCA
<7>[ 206.163574] usb usb1: usb wakeup-resume
<7>[ 206.163604] usb usb1: usb auto-resume
<7>[ 206.163665] ehci-omap ehci-omap: resume root hub
<7>[ 206.208679] hub 1-0:1.0: hub_resume
<7>[ 206.208801] ehci-omap ehci-omap: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 206.208892] hub 1-0:1.0: port 1: status 0501 change 0001
<7>[ 206.318084] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
<7>[ 206.318237] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
<7>[ 206.380737] ehci-omap ehci-omap: port 1 high speed
<7>[ 206.380828] ehci-omap ehci-omap: GetStatus port:1 status 001805 0 ACK POWER sig=j PE CONNECT
<6>[ 206.442901] usb 1-1: new high speed USB device using ehci-omap and address 2
<7>[ 206.505493] ehci-omap ehci-omap: port 1 high speed
<7>[ 206.505523] ehci-omap ehci-omap: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 206.607269] usb 1-1: default language 0x0409
<7>[ 206.613342] usb 1-1: udev 2, busnum 1, minor = 1
<6>[ 206.613372] usb 1-1: New USB device found, idVendor=1bbb, idProduct=f000
<6>[ 206.613403] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
<6>[ 206.613403] usb 1-1: Product: HSPA Data Card
<6>[ 206.613433] usb 1-1: Manufacturer: USBModem
<6>[ 206.613433] usb 1-1: SerialNumber: 1234567890ABCDEF
<7>[ 206.626861] usb 1-1: usb_probe_device
<7>[ 206.626922] usb 1-1: configuration #1 chosen from 1 choice
<7>[ 206.630523] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
<7>[ 206.633575] usb-storage 1-1:1.0: usb_probe_interface
<7>[ 206.633605] usb-storage 1-1:1.0: usb_probe_interface - got id
<6>[ 206.633819] scsi0 : usb-storage 1-1:1.0
<7>[ 206.640411] /mnt/flash/release/AX09/avx9_hc/arcbuild/linux/drivers/usb/core/inode.c: creating file '002'
<7>[ 206.642791] usb usb2: usb auto-resume
<7>[ 206.661651] hub 2-0:1.0: hub_resume
<7>[ 206.661987] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>[ 206.663482] usb-storage 1-1:1.0: disconnect by usbfs
<4>[ 206.680572] usb 1-1: usbfs: process 2916 (usb_modeswitch) did not claim interface 0 before use
<7>[ 206.682617] ehci-omap ehci-omap: detected XactErr len 0/0 retry 1
<7>[ 206.682708] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
<7>[ 206.682769] ehci-omap ehci-omap: GetStatus port:1 status 001002 0 ACK POWER sig=se0 CSC
<7>[ 206.682800] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
<6>[ 206.682800] usb 1-1: USB disconnect, address 2
<7>[ 206.794464] ehci-omap ehci-omap: detected XactErr len 0/0 retry 2
<7>[ 206.794616] ehci-omap ehci-omap: detected XactErr len 0/0 retry 3
<7>[ 206.794738] ehci-omap ehci-omap: detected XactErr len 0/0 retry 4
<7>[ 206.794860] ehci-omap ehci-omap: detected XactErr len 0/0 retry 5
<7>[ 206.795166] ehci-omap ehci-omap: detected XactErr len 0/0 retry 6
<7>[ 206.795410] ehci-omap ehci-omap: detected XactErr len 0/0 retry 7
<7>[ 206.795684] ehci-omap ehci-omap: detected XactErr len 0/0 retry 8
<7>[ 206.795959] ehci-omap ehci-omap: detected XactErr len 0/0 retry 9
<7>[ 206.796234] ehci-omap ehci-omap: detected XactErr len 0/0 retry 10
<7>[ 206.796478] ehci-omap ehci-omap: detected XactErr len 0/0 retry 11
<7>[ 206.796752] ehci-omap ehci-omap: detected XactErr len 0/0 retry 12
<7>[ 206.797027] ehci-omap ehci-omap: detected XactErr len 0/0 retry 13
<7>[ 206.797180] ehci-omap ehci-omap: detected XactErr len 0/0 retry 14
<7>[ 206.797454] ehci-omap ehci-omap: detected XactErr len 0/0 retry 15
<7>[ 206.797729] ehci-omap ehci-omap: detected XactErr len 0/0 retry 16
<7>[ 206.797973] ehci-omap ehci-omap: detected XactErr len 0/0 retry 17
<7>[ 206.798248] ehci-omap ehci-omap: detected XactErr len 0/0 retry 18
<7>[ 206.798522] ehci-omap ehci-omap: detected XactErr len 0/0 retry 19
<7>[ 206.798767] ehci-omap ehci-omap: detected XactErr len 0/0 retry 20
<7>[ 206.798950] ehci-omap ehci-omap: detected XactErr len 0/0 retry 21
<7>[ 206.799133] ehci-omap ehci-omap: detected XactErr len 0/0 retry 22
<7>[ 206.799316] ehci-omap ehci-omap: detected XactErr len 0/0 retry 23
<7>[ 206.799530] ehci-omap ehci-omap: detected XactErr len 0/0 retry 24
<7>[ 206.799682] ehci-omap ehci-omap: detected XactErr len 0/0 retry 25
<7>[ 206.799865] ehci-omap ehci-omap: detected XactErr len 0/0 retry 26
<7>[ 206.800018] ehci-omap ehci-omap: detected XactErr len 0/0 retry 27
<7>[ 206.800201] ehci-omap ehci-omap: detected XactErr len 0/0 retry 28
<7>[ 206.800384] ehci-omap ehci-omap: detected XactErr len 0/0 retry 29
<7>[ 206.800567] ehci-omap ehci-omap: detected XactErr len 0/0 retry 30
<7>[ 206.800781] ehci-omap ehci-omap: detected XactErr len 0/0 retry 31
<7>[ 206.800933] ehci-omap ehci-omap: devpath 1 ep0out 3strikes
<7>[ 206.801239] usb 1-1: unregistering device
<7>[ 206.801269] usb 1-1: usb_disable_device nuking all URBs
<7>[ 206.801300] usb 1-1: unregistering interface 1-1:1.0
<7>[ 206.807250] ehci-omap ehci-omap: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 206.958374] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
<7>[ 207.021240] ehci-omap ehci-omap: port 1 high speed
<7>[ 207.021270] ehci-omap ehci-omap: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 207.083374] usb 1-1: new high speed USB device using ehci-omap and address 3
<7>[ 207.145996] ehci-omap ehci-omap: port 1 high speed
<7>[ 207.146026] ehci-omap ehci-omap: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 207.247009] usb 1-1: default language 0x0409
<7>[ 207.253051] usb 1-1: udev 3, busnum 1, minor = 2
<6>[ 207.253082] usb 1-1: New USB device found, idVendor=1bbb, idProduct=0000
<6>[ 207.253082] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
<6>[ 207.253112] usb 1-1: Product: USBModem Configuration
<6>[ 207.253112] usb 1-1: Manufacturer: USBModem
<6>[ 207.253143] usb 1-1: SerialNumber: 1234567890ABCDEF
<7>[ 207.258117] usb 1-1: usb_probe_device
<7>[ 207.258148] usb 1-1: configuration #1 chosen from 1 choice
<7>[ 207.261413] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
<7>[ 207.262847] usbserial_generic 1-1:1.0: usb_probe_interface
<7>[ 207.262847] usbserial_generic 1-1:1.0: usb_probe_interface - got id
<7>[ 207.263061] usb 1-1: adding 1-1:1.1 (config #1, interface 1)
<7>[ 207.264465] usbserial_generic 1-1:1.1: usb_probe_interface
<7>[ 207.264465] usbserial_generic 1-1:1.1: usb_probe_interface - got id
<7>[ 207.264587] usb 1-1: adding 1-1:1.2 (config #1, interface 2)
<7>[ 207.265563] usb-storage 1-1:1.2: usb_probe_interface
<7>[ 207.265594] usb-storage 1-1:1.2: usb_probe_interface - got id
<6>[ 207.265747] scsi1 : usb-storage 1-1:1.2
<7>[ 207.267852] usb 1-1: adding 1-1:1.3 (config #1, interface 3)
<7>[ 207.268890] usbserial_generic 1-1:1.3: usb_probe_interface
<7>[ 207.268920] usbserial_generic 1-1:1.3: usb_probe_interface - got id
<7>[ 207.270233] /mnt/flash/release/AX09/avx9_hc/arcbuild/linux/drivers/usb/core/inode.c: creating file '003'
<7>[ 207.270324] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
<5>[ 208.267089] scsi 1:0:0:0: Direct-Access USBModem MMC Storage 2.31 PQ: 0 ANSI: 2
<5>[ 208.297210] sd 1:0:0:0: [sda] Attached SCSI removable disk
<7>[ 210.614776] hub 2-0:1.0: hub_suspend
<7>[ 210.614807] usb usb2: bus auto-suspend
<7>[ 212.643524] usb usb2: usb auto-resume
<7>[ 212.661743] hub 2-0:1.0: hub_resume
<7>[ 212.661804] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>[ 215.614807] hub 2-0:1.0: hub_suspend
<7>[ 215.614868] usb usb2: bus auto-suspend
<7>[ 217.671020] usb usb2: usb auto-resume
<7>[ 217.693115] hub 2-0:1.0: hub_resume
<7>[ 217.693237] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>[ 220.614990] hub 2-0:1.0: hub_suspend
<7>[ 220.615081] usb usb2: bus auto-suspend
<4>[ 254.514160] CPU1: Booted secondary processor
<5>[ 256.482391] CPU1: shutdown

Hi
Is it a GSM Modem?
It's looks like the device has switched to the wrong mode.
Although It's got a label of USBModem, There aren't any modem interfaces found.
I would edit /etc/usb_modeswitch/1bbb_f000 and remove the 0000 from the begining of the target product
list so it only has "0017,00b7" and swap the message lines over at the bottom of the file as it sugguests.
This will giving you different modes as I think usb_modeswitch settles on the first valid target product it finds. Which in your case would always be 0000
If it still does not register as a modem then I would suspect you need more drivers, usb_wwan.ko and option.ko specifically.
Hope That Helps

i have this stick

To my experience, these composite devices work as follows. First, they are recognized as storage. Second, in Windows, drivers and utilities are installed from this storage. Third, these utilities are run and start with sending some USB message (which may be generic or vendor- or product-specific, I don't know yet) which switches the device into usb-serial mode; in Linux, this may be done manually by usb-modeswitch, provided that you know the message. Fourth, the device is re-detected as usb-serial (typically even multiple ports) and operated as such.
Hence, the principal problem is to figure out the USB message. This may be learnt either from the vendor's documentation (which is typically provided under NDA and not available to end-users) or by monitoring a Windows system with a USB sniffer.
Another possible approach is setting usb-serial (or probably acm, in case of Linux) as the default mode that the device takes on power up, instead of storage. This would not be difficult to do once you set up the device on a Windows machine and can operate it as a modem. Then any machine, including a Linux one, will recognize it immediately as a modem. The principal problem is, once again, to learn the required AT command. I know these for a few devices but not for that one.
If someone happens to run into these data for this modem, or for other modems of the same vendor (1bbb), or maybe a generic command that might be specified in some standard command set - please let me know, or try it yourselves.

The last part of dmesg after removing 0000 from the list and uncommenting the line for 0017
Code:
425.090393] USB_EHCI resuming
<3>[ 425.091613] Resuming platform bus
<3>[ 425.310119] Phy is now ON
<3>[ 425.419494] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x18600CA
<3>[ 425.419586] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x1C40041
<3>[ 425.419799] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x1C40040
<3>[ 425.420013] uhhtll-omap uhhtll-omap: USB interrupt rising = 1F
<3>[ 425.420135] uhhtll-omap uhhtll-omap: USB interrupt falling = 1F
<3>[ 425.420227] uhhtll-omap uhhtll-omap: USB interrupt status = 4
<3>[ 425.420440] uhhtll-omap uhhtll-omap: USB interface status = 10
<3>[ 425.420562] uhhtll-omap uhhtll-omap: USB debug status = 1
<3>[ 425.420745] uhhtll-omap uhhtll-omap: Scratch register = 0xCA - should be 0xCA
<7>[ 425.420806] usb usb1: usb wakeup-resume
<7>[ 425.420806] usb usb1: usb auto-resume
<7>[ 425.420837] ehci-omap ehci-omap: resume root hub
<7>[ 425.466400] hub 1-0:1.0: hub_resume
<7>[ 425.466430] ehci-omap ehci-omap: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 425.466461] hub 1-0:1.0: port 1: status 0501 change 0001
<7>[ 425.575744] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
<7>[ 425.575805] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
<7>[ 425.638488] ehci-omap ehci-omap: port 1 high speed
<7>[ 425.638519] ehci-omap ehci-omap: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 425.700744] usb 1-1: new high speed USB device using ehci-omap and address 4
<7>[ 425.763488] ehci-omap ehci-omap: port 1 high speed
<7>[ 425.763519] ehci-omap ehci-omap: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 425.865478] usb 1-1: default language 0x0409
<7>[ 425.871490] usb 1-1: udev 4, busnum 1, minor = 3
<6>[ 425.871490] usb 1-1: New USB device found, idVendor=1bbb, idProduct=f000
<6>[ 425.871520] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
<6>[ 425.871551] usb 1-1: Product: HSPA Data Card
<6>[ 425.871551] usb 1-1: Manufacturer: USBModem
<6>[ 425.871582] usb 1-1: SerialNumber: 1234567890ABCDEF
<7>[ 425.876800] usb 1-1: usb_probe_device
<7>[ 425.876831] usb 1-1: configuration #1 chosen from 1 choice
<7>[ 425.880523] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
<7>[ 425.882476] usb-storage 1-1:1.0: usb_probe_interface
<7>[ 425.882537] usb-storage 1-1:1.0: usb_probe_interface - got id
<6>[ 425.882751] scsi2 : usb-storage 1-1:1.0
<7>[ 425.889160] /mnt/flash/release/AX09/avx9_hc/arcbuild/linux/drivers/usb/core/inode.c: creating file '004'
<7>[ 425.940490] usb usb2: usb auto-resume
<7>[ 425.958557] hub 2-0:1.0: hub_resume
<7>[ 425.958618] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>[ 425.960357] usb-storage 1-1:1.0: disconnect by usbfs
<4>[ 425.979339] usb 1-1: usbfs: process 3197 (usb_modeswitch) did not claim interface 0 before use
<7>[ 428.614807] hub 2-0:1.0: hub_suspend
<7>[ 428.614868] usb usb2: bus auto-suspend
<7>[ 433.941406] usb usb2: usb auto-resume
<7>[ 433.958801] hub 2-0:1.0: hub_resume
<7>[ 433.958953] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>[ 436.614959] hub 2-0:1.0: hub_suspend
<7>[ 436.615051] usb usb2: bus auto-suspend

cajl said:
i have this stick
Click to expand...
Click to collapse
Hi cajl can you please post dmesg output when the stick is inserted into the tablet?
Thanks!

how view this ?

Install a terminal emulator from the market and run at the command prompt
Code:
dmesg > /mnt/sdcard/dmesg.txt
And then upload here the dmesg.txt from the sdcard.

the system is read/only !
i use an another gen 9 with root
---------- Post added at 08:39 PM ---------- Previous post was at 08:37 PM ----------
the system is read/only !
i use an another gen 9 with root
and i send the file tomorrow

x3ss said:
The last part of dmesg after removing 0000 from the list and uncommenting the line for 0017
Code:
425.090393] USB_EHCI resuming
<3>[ 425.091613] Resuming platform bus
<3>[ 425.310119] Phy is now ON
<3>[ 425.419494] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x18600CA
<3>[ 425.419586] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x1C40041
<3>[ 425.419799] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x1C40040
<3>[ 425.420013] uhhtll-omap uhhtll-omap: USB interrupt rising = 1F
<3>[ 425.420135] uhhtll-omap uhhtll-omap: USB interrupt falling = 1F
<3>[ 425.420227] uhhtll-omap uhhtll-omap: USB interrupt status = 4
<3>[ 425.420440] uhhtll-omap uhhtll-omap: USB interface status = 10
<3>[ 425.420562] uhhtll-omap uhhtll-omap: USB debug status = 1
<3>[ 425.420745] uhhtll-omap uhhtll-omap: Scratch register = 0xCA - should be 0xCA
<7>[ 425.420806] usb usb1: usb wakeup-resume
<7>[ 425.420806] usb usb1: usb auto-resume
<7>[ 425.420837] ehci-omap ehci-omap: resume root hub
<7>[ 425.466400] hub 1-0:1.0: hub_resume
<7>[ 425.466430] ehci-omap ehci-omap: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 425.466461] hub 1-0:1.0: port 1: status 0501 change 0001
<7>[ 425.575744] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
<7>[ 425.575805] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
<7>[ 425.638488] ehci-omap ehci-omap: port 1 high speed
<7>[ 425.638519] ehci-omap ehci-omap: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 425.700744] usb 1-1: new high speed USB device using ehci-omap and address 4
<7>[ 425.763488] ehci-omap ehci-omap: port 1 high speed
<7>[ 425.763519] ehci-omap ehci-omap: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 425.865478] usb 1-1: default language 0x0409
<7>[ 425.871490] usb 1-1: udev 4, busnum 1, minor = 3
<6>[ 425.871490] usb 1-1: New USB device found, idVendor=1bbb, idProduct=f000
<6>[ 425.871520] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
<6>[ 425.871551] usb 1-1: Product: HSPA Data Card
<6>[ 425.871551] usb 1-1: Manufacturer: USBModem
<6>[ 425.871582] usb 1-1: SerialNumber: 1234567890ABCDEF
<7>[ 425.876800] usb 1-1: usb_probe_device
<7>[ 425.876831] usb 1-1: configuration #1 chosen from 1 choice
<7>[ 425.880523] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
<7>[ 425.882476] usb-storage 1-1:1.0: usb_probe_interface
<7>[ 425.882537] usb-storage 1-1:1.0: usb_probe_interface - got id
<6>[ 425.882751] scsi2 : usb-storage 1-1:1.0
<7>[ 425.889160] /mnt/flash/release/AX09/avx9_hc/arcbuild/linux/drivers/usb/core/inode.c: creating file '004'
<7>[ 425.940490] usb usb2: usb auto-resume
<7>[ 425.958557] hub 2-0:1.0: hub_resume
<7>[ 425.958618] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>[ 425.960357] usb-storage 1-1:1.0: disconnect by usbfs
<4>[ 425.979339] usb 1-1: usbfs: process 3197 (usb_modeswitch) did not claim interface 0 before use
<7>[ 428.614807] hub 2-0:1.0: hub_suspend
<7>[ 428.614868] usb usb2: bus auto-suspend
<7>[ 433.941406] usb usb2: usb auto-resume
<7>[ 433.958801] hub 2-0:1.0: hub_resume
<7>[ 433.958953] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>[ 436.614959] hub 2-0:1.0: hub_suspend
<7>[ 436.615051] usb usb2: bus auto-suspend
Click to expand...
Click to collapse
Hmmm,
It looks like it hasn't switched modes to the modem as shown by this line:
Code:
<6>[ 425.871490] usb 1-1: New USB device found, idVendor=1bbb, idProduct=f000
Note the f000 productid
Try this from adb or terminal emulator
Code:
usb_modeswitch -s 3 -v 0x1bbb -p 0xf000 -V 0x1bbb -P 0x0017 -M "5553424308a05984c000000080000606f50402527000000000000000000000"
Note: We are using the Original Message content
This ubuntu thread seems to cover this piece of hardware and uses the original message the bring up the modem interface

@cajlThere is no need for root or rw access.
That command saves the file on the external sdcard if un have one in the slot.
@trevd
0017 is for alcatel x225 that they talk at the link you gave me
But x200 must change to 0000 as i found here

see that with 3g enable
581359] omapdss HDMI: pwrchanged => (1,A) = 0
<7>[ 3.593780] hub 1-0:1.0: hub_suspend
<7>[ 3.593811] usb usb1: bus auto-suspend
<7>[ 3.593841] ehci-omap ehci-omap: suspend root hub
<3>[ 3.594268] USB EHCI suspending
<6>[ 3.615570] cypress-tma340 4-0024: BOOT 010b / TTS 14dc / APP 0622 / ID 2200
<6>[ 3.662231] fuse init (API version 7.14)
<3>[ 3.691375] init: untracked pid 1867 exited
<3>[ 3.695800] init: running exec failed
<3>[ 3.696014] init: untracked pid 1871 exited
<6>[ 3.905883] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
<6>[ 3.913818] enabling adb
<6>[ 3.937744] adb_open
<3>[ 4.026062] init: untracked pid 1898 exited
<6>[ 4.203704] charge_level set to 2
<6>[ 4.269439] android_usb gadget: high speed config #1: android
<6>[ 4.331787] omap-remoteproc omap-remoteproc.0: omap_rproc_open: dev num 0, name tesla, count 1
<6>[ 4.331848] omap-remoteproc omap-remoteproc.1: omap_rproc_open: dev num 1, name ducati-proc0, count 1
<6>[ 4.331909] omap-remoteproc omap-remoteproc.2: omap_rproc_open: dev num 2, name ducati-proc1, count 1
<3>[ 4.332092] platform_mem_setup : status [0x0]
<3>[ 4.332092] platform_setup : status [0x0]
<3>[ 4.332122] proc_mgr_setup : status [0x0]
<3>[ 4.332122] sharedregion_setup : status [0x0]
<6>[ 4.332153] omap mailbox rev 0.0
<3>[ 4.332183] notify_ducatidrv_setup : status [0x0]
<3>[ 4.332214] notify_setup : status [0x0]
<3>[ 4.332427] ipu_pm_setup : status [0x0]
<3>[ 4.332458] nameserver_setup : status [0x0]
<3>[ 4.332458] nameserver_get_handle failed! status = 0xfffffffe
<3>[ 4.332489] gatemp_setup : status [0x0]
<3>[ 4.332489] gatepeterson_setup : status [0x0]
<3>[ 4.332519] nameserver_get_handle failed! status = 0xfffffffe
<3>[ 4.332550] messageq_setup : status [0x0]
<3>[ 4.332580] nameserver_get_handle failed! status = 0xfffffffe
<3>[ 4.332580] heapbufmp_setup : status [0x0]
<3>[ 4.332611] nameserver_get_handle failed! status = 0xfffffffe
<3>[ 4.332611] heapmemmp_setup : status [0x0]
<3>[ 4.332641] nameserver_get_handle failed! status = 0xfffffffe
<3>[ 4.332641] listmp_setup : status [0x0]
<3>[ 4.332672] transportshm_setup : status [0xa7a000]
<3>[ 4.332672] nameserver_remotenotify_setup : status [0x0]
<3>[ 4.332794] _platform_setup : status [0x0]
<6>[ 4.332885] omap-remoteproc omap-remoteproc.0: omap_rproc_open: dev num 0, name tesla, count 1
<6>[ 4.332916] omap-remoteproc omap-remoteproc.1: omap_rproc_open: dev num 1, name ducati-proc0, count 1
<6>[ 4.332946] omap-remoteproc omap-remoteproc.2: omap_rproc_open: dev num 2, name ducati-proc1, count 1
<3>[ 4.369323] USB_EHCI resuming
<3>[ 4.369873] Resuming platform bus
<3>[ 4.591796] Phy is now ON
<3>[ 4.701202] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x1860000
<3>[ 4.701354] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x1C40041
<3>[ 4.701538] uhhtll-omap uhhtll-omap: EHCI_INSREG05 0x1C40040
<3>[ 4.701751] uhhtll-omap uhhtll-omap: USB interrupt rising = 1F
<3>[ 4.701873] uhhtll-omap uhhtll-omap: USB interrupt falling = 1F
<3>[ 4.701965] uhhtll-omap uhhtll-omap: USB interrupt status = 6
<3>[ 4.702178] uhhtll-omap uhhtll-omap: USB interface status = 10
<3>[ 4.702301] uhhtll-omap uhhtll-omap: USB debug status = 1
<3>[ 4.702514] uhhtll-omap uhhtll-omap: Scratch register = 0xCA - should be 0xCA
<7>[ 4.702545] hub 2-0:1.0: hub_suspend
<7>[ 4.702575] usb usb2: bus auto-suspend
<7>[ 4.702606] usb usb1: usb wakeup-resume
<7>[ 4.702606] usb usb1: usb auto-resume
<7>[ 4.702636] ehci-omap ehci-omap: resume root hub
<7>[ 4.748077] hub 1-0:1.0: hub_resume
<7>[ 4.748138] ehci-omap ehci-omap: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 4.748199] hub 1-0:1.0: port 1: status 0501 change 0001
<7>[ 4.857788] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
<7>[ 4.857849] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
<4>[ 4.861450] omap_hwmod: ipu: failed to reset in 10000 usec
<3>[ 4.862792] proc4430_attach num_mem_entries = 6
<6>[ 4.863189] proc_mgr_attachroc_mgr_handle->num_mem_entries = 6
<3>[ 4.867431] proc4430_attach num_mem_entries = 6
<6>[ 4.867462] proc_mgr_attachroc_mgr_handle->num_mem_entries = 6
<3>[ 4.917388] _platform_read_slave_memory successful! status = 0x0, proc_id = 2, addr = 0xd600, m_addr = 0xe120d600, size = 0x20
<3>[ 4.917419] _platform_read_slave_memory successful! status = 0x0, proc_id = 2, addr = 0xd620, m_addr = 0xe120d620, size = 0x30
<3>[ 4.923400] _platform_write_slave_memory successful! status = 0x0, proc_id = 2, addr = 0xd600, m_addr = 0xe120d600, size = 0x20
<7>[ 4.923919] ehci-omap ehci-omap: port 1 high speed
<7>[ 4.923950] ehci-omap ehci-omap: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 4.924255] omap-remoteproc omap-remoteproc.1: omap_rproc_ioctl
<3>[ 4.927307] ipc_proc_sync_start failed: status [0xffffffff]
<3>[ 4.927337] ipc_attach : ipc_proc_sync_start failed [0xffffffff]
<3>[ 4.927368] ipc_attach failed! status = 0xffffffff
<3>[ 4.935791] ipc_proc_sync_start failed: status [0xffffffff]
<3>[ 4.935852] ipc_attach : ipc_proc_sync_start failed [0xffffffff]
<3>[ 4.935852] ipc_attach failed! status = 0xffffffff
<3>[ 4.952301] ipc_proc_sync_start failed: status [0xffffffff]
<3>[ 4.952362] ipc_attach : ipc_proc_sync_start failed [0xffffffff]
<3>[ 4.952392] ipc_attach failed! status = 0xffffffff
<3>[ 4.968109] ipc_proc_sync_start done
<3>[ 4.968139] ipc_proc_sync_start : status [0x0]
<3>[ 4.968170] gatemp_attach : status [0x0]
<3>[ 4.968200] sharedregion_attach : status [0x0]
<3>[ 4.968200] sharedregion_get_ptr : status [0x0]
<3>[ 4.968231] notify_attach : status [0x0]
<3>[ 4.968292] ipu_pm_attach : status [0x0]
<3>[ 4.968292] sharedregion_get_ptr : status [0x0]
<3>[ 4.968322] nameserver_remotenotify_attach : status [0x0]
<3>[ 4.968322] sharedregion_get_ptr : status [0x0]
<3>[ 4.968353] messageq_attach : status [0x0]
<3>[ 4.968383] ipc_proc_sync_finish : status [0x0]
<6>[ 4.982513] usb 1-1: new high speed USB device using ehci-omap and address 2
<7>[ 5.045166] ehci-omap ehci-omap: port 1 high speed
<7>[ 5.045227] ehci-omap ehci-omap: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 5.141204] usb 1-1: default language 0x0409
<7>[ 5.142578] usb 1-1: udev 2, busnum 1, minor = 1
<6>[ 5.142578] usb 1-1: New USB device found, idVendor=1bbb, idProduct=f000
<6>[ 5.142608] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
<6>[ 5.142639] usb 1-1: Product: HSPA Data Card
<6>[ 5.142639] usb 1-1: Manufacturer: USBModem
<6>[ 5.142669] usb 1-1: SerialNumber: 1234567890ABCDEF
<7>[ 5.143463] usb 1-1: usb_probe_device
<7>[ 5.143493] usb 1-1: configuration #1 chosen from 1 choice
<7>[ 5.146331] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
<7>[ 5.146850] usb-storage 1-1:1.0: usb_probe_interface
<7>[ 5.146881] usb-storage 1-1:1.0: usb_probe_interface - got id
<6>[ 5.147125] scsi0 : usb-storage 1-1:1.0
<7>[ 5.148529] /mnt/flash/release/AX09/avx9_hc/arcbuild/linux/drivers/usb/core/inode.c: creating file '002'
<3>[ 5.372528] _platform_read_slave_memory successful! status = 0x0, proc_id = 1, addr = 0x382f00, m_addr = 0xe1a82f00, size = 0x20
<3>[ 5.372589] _platform_read_slave_memory successful! status = 0x0, proc_id = 1, addr = 0x382f20, m_addr = 0xe1a82f20, size = 0x30
<3>[ 5.372619] _platform_write_slave_memory successful! status = 0x0, proc_id = 1, addr = 0x382f00, m_addr = 0xe1a82f00, size = 0x20
<6>[ 5.372680] omap-remoteproc omap-remoteproc.2: omap_rproc_ioctl
<3>[ 5.373596] ipc_proc_sync_start failed: status [0xffffffff]
<3>[ 5.373626] ipc_attach : ipc_proc_sync_start failed [0xffffffff]
<3>[ 5.373657] ipc_attach failed! status = 0xffffffff
<3>[ 5.382843] ipc_proc_sync_start failed: status [0xffffffff]
<3>[ 5.382873] ipc_attach : ipc_proc_sync_start failed [0xffffffff]
<3>[ 5.382904] ipc_attach failed! status = 0xffffffff
<3>[ 5.398468] ipc_proc_sync_start done
<3>[ 5.398498] ipc_proc_sync_start : status [0x0]
<3>[ 5.398498] gatemp_attach : status [0x1]
<3>[ 5.398529] sharedregion_attach : status [0x0]
<3>[ 5.398559] sharedregion_get_ptr : status [0x0]
<3>[ 5.398590] notify_attach : status [0x0]
<3>[ 5.398620] ipu_pm_attach : status [0x0]
<3>[ 5.398620] sharedregion_get_ptr : status [0x0]
<3>[ 5.398651] nameserver_remotenotify_attach : status [0x0]
<3>[ 5.398681] sharedregion_get_ptr : status [0x0]
<3>[ 5.398712] messageq_attach : status [0x0]
<3>[ 5.398742] ipc_proc_sync_finish : status [0x0]
<6>[ 5.418548] Registered user-space process for DEV_SYS_ERROR event in SysM3
<6>[ 5.418579] Registered user-space process for DEV_WATCHDOG_ERROR event in SysM3
<6>[ 5.418609] Registered user-space process for DEV_SYS_ERROR event in AppM3
<6>[ 5.418640] Registered user-space process for DEV_WATCHDOG_ERROR event in AppM3
<5>[ 6.151306] scsi 0:0:0:0: CD-ROM ALCATEL Mass Storage 2.31 PQ: 0 ANSI: 2
<5>[ 9.451751] CPU1: shutdown
<4>[ 11.279510] CPU1: Booted secondary processor
<6>[ 13.283905] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<4>[ 13.587829] mma8453q_ctrl_ioctl: Get mode 1
<6>[ 14.416137] Sleep APPM3
<6>[ 14.416229] Sleep SYSM3
<5>[ 21.756500] CPU1: shutdown
<4>[ 26.443725] CPU1: Booted secondary processor
<5>[ 28.357971] CPU1: shutdown
<4>[ 30.392028] CPU1: Booted secondary processor
<5>[ 30.850250] CPU1: shutdown
<4>[ 32.053466] CPU1: Booted secondary processor
<5>[ 35.061401] CPU1: shutdown
<4>[ 35.555969] CPU1: Booted secondary processor
<5>[ 38.959594] CPU1: shutdown
<4>[ 50.394653] CPU1: Booted secondary processor
<5>[ 53.717407] CPU1: shutdown
<4>[ 57.175994] CPU1: Booted secondary processor
<5>[ 59.717407] CPU1: shutdown
<4>[ 61.840789] CPU1: Booted secondary processor
<5>[ 64.811126] CPU1: shutdown
<4>[ 66.771759] CPU1: Booted secondary processor
<5>[ 68.795532] CPU1: shutdown
<6>[ 79.378021] TIWLAN: driver init
<6>[ 79.378570] TI WiLink 1283 SDIO: Driver loaded
<6>[ 79.382324] wifi_probe: got wlan irq 262
<6>[ 79.382354] wifi_probe: got wlan irq trigger falling flag
<4>[ 79.383087] wl1271_wifi_set_carddetect: 0
<7>[ 79.383117] mmc2: card_present 0
<4>[ 79.383148] wl1271_wifi_reset: 1
<4>[ 79.383148] wl1271_wifi_power: 0
<4>[ 79.418914] CPU1: Booted secondary processor
<6>[ 80.489227] TIWLAN: 2971.675323: pInitParams->RoamingScanning_2_4G_enable 0
<4>[ 80.489349] wl1271_wifi_power: 1
<4>[ 80.503601] wl1271_wifi_power: 0
<4>[ 80.504577] wl1271_wifi_power: 1
<4>[ 80.570770] wl1271_wifi_reset: 0
<4>[ 80.570800] wl1271_wifi_set_carddetect: 1
<7>[ 80.570800] mmc2: card_present 1
<6>[ 80.718444] request_suspend_state: wakeup (3->0) at 81111022959 (2012-02-13 19:43:26.030334478 UTC)
<7>[ 80.720794] omap_pwm_led_set: brightness: 254
<7>[ 80.720825] omap_pwm_led_set_pwm_cycle: cycle: 254
<7>[ 80.810272] usb usb2: usb auto-resume
<7>[ 80.826232] hub 2-0:1.0: hub_resume
<7>[ 80.828247] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
<4>[ 80.843811] mmc2: card claims to support voltages below the defined range. These will be ignored.
<6>[ 80.845001] mmc2: new SDIO card at address 0001
<6>[ 80.849151] TIWLAN: Found TI/WLAN SDIO controller (vendor 0x97, device 0x4076, class 0x7)
<4>[ 80.849273] sdioAdapt_ConnectBus(): Block-Size should be bigger than SYNC_ASYNC_LENGTH_THRESH!!
<6>[ 80.850219] TIWLAN: 2972.036315: Working on a 1273 PG 2.0 board.
<6>[ 80.850250] TIWLAN: 2972.036315: CHIP VERSION... set 1273 chip top registers
<6>[ 80.851013] TIWLAN: 2972.037109: XTAL 38.4 MHz configured for COM6
<6>[ 80.851226] TIWLAN: 2972.037322: Starting to process NVS...
<6>[ 80.851257] TIWLAN: 2972.037353: NVS found, EEPROM Image addr=0xd9766c00, EEPROM Len=0x0x1d4
<6>[ 80.878082] TIWLAN: 2972.064178: Firmware successfully downloaded.
<6>[ 80.878143] TIWLAN: 2972.064239: FW download OK...
<6>[ 80.883789] TIWLAN: 2972.069885: Firmware successfully downloaded.
<6>[ 80.883850] TIWLAN: 2972.069915: FW download OK...
<6>[ 80.884033] TIWLAN: 2972.070129: Firmware successfully downloaded.
<6>[ 80.884063] TIWLAN: 2972.070159: FW download OK...
<6>[ 80.885955] TIWLAN: 2972.072051: Firmware successfully downloaded.
<6>[ 80.885986] TIWLAN: 2972.072082: FW download OK...
<6>[ 80.886993] TIWLAN: 2972.073089: Firmware successfully downloaded.
<6>[ 80.887023] TIWLAN: 2972.073120: FW download OK...
<6>[ 80.887603] TIWLAN: 2972.073669: Finished downloading firmware.
<6>[ 80.887664] TIWLAN: 2972.073730: Firmware running.
<6>[ 80.906982] TIWLAN: 2972.093048: Firmware successfully downloaded.
<6>[ 80.907012] TIWLAN: 2972.093109: FW download OK...
<6>[ 80.907135] TIWLAN: 2972.093231:
<6>[ 80.907165] TIWLAN: 2972.093231: --------------------------------------------------------------------
<6>[ 80.907165] TIWLAN: 2972.093261: Driver Version : MCP-WiLink_Driver_2.5.3.0.18
<6>[ 80.907196] TIWLAN: 2972.093292: Firmware Version: Rev 6.1.3.11.54
<6>[ 80.907226] TIWLAN: 2972.093322: Station ID : 00-16-DC-6C-CC-C1
<6>[ 80.907257] TIWLAN: 2972.093322: --------------------------------------------------------------------
<6>[ 80.907257] TIWLAN: 2972.093353:
<3>[ 80.915649] init: untracked pid 2215 exited
<6>[ 80.921447] TIWLAN: 2972.107543: Interrogate TX/RX parameters
<6>[ 81.199066] ADDRCONF(NETDEV_UP): tiwlan0: link is not ready
<4>[ 81.766662] mma8453q_ctrl_ioctl: Set polling delay 0
<4>[ 81.798645] mma8453q_ctrl_ioctl: Set polling delay 200
<4>[ 81.811859] mma8453q_ctrl_ioctl: Set polling delay 60
<6>[ 83.038391] TIWLAN: 2974.224456: 0000 01 00 03 00 00 00 10 80 A9 36 EE 8C 0F A4 8C 5B
<6>[ 83.038452] TIWLAN: 2974.224548: 0010 D8 0A C2 6F 5B D1 A3 63 1A 20 5A 84 4F 85 52 5B
<6>[ 83.038482] TIWLAN: 2974.224578: 0020 62 E3 0E FA 54 29 8A 05 4A 44 B2 59 80 B0 1F 31
<6>[ 83.038543] TIWLAN: 2974.224639: 0030 CE DE 22 49 30 E4 F8 F2 22 07 33 E9 CA 01 D3 05
<6>[ 83.038604] TIWLAN: 2974.224700: 0040 AE AE ED E9 04 E5 2D C0 0A 30 F8 34 DB B0 B7 FC
<6>[ 83.038635] TIWLAN: 2974.224731: 0050 78 FC 83 4A D2 84 A7 45 96 29 10 DB 31 54 35 38
<6>[ 83.038696] TIWLAN: 2974.224792: 0060 2C D8 F4 AD A1 24 B0 2B F4 9E B7 C9 51 2A 73 8A
<6>[ 83.038726] TIWLAN: 2974.224822: 0070 9B 8D FD 48 0B 67 E8 99 38 B7 A7 04 16 5D D9 23
<6>[ 83.038787] TIWLAN: 2974.224884: 0080 BF E9 C0 5B 78 7D E1 F1
<6>[ 83.047149] ADDRCONF(NETDEV_CHANGE): tiwlan0: link becomes ready
<6>[ 83.061920] TIWLAN: 2974.247985: connInfra , CONSOLE:************ NEW CONNECTION ************
<6>[ 83.061981] TIWLAN: 2974.248077: ************ NEW CONNECTION ************
<6>[ 83.062011] TIWLAN: 2974.248107: siteMgr , CONSOLE:-- BSSID = 6a-12-f8-a9-b9-50
<6>[ 83.062072] TIWLAN: 2974.248168: -- SSID = chez_nous
<6>[ 83.062103] TIWLAN: 2974.248199: -- BSSID = 6a-12-f8-a9-b9-50
<6>[ 83.062133] TIWLAN: 2974.248229: -- MODE = infrastructure
<6>[ 83.062164] TIWLAN: 2974.248260: connInfra , CONSOLE:****************************************
<6>[ 83.062225] TIWLAN: 2974.248321: ****************************************
<7>[ 83.623138] hub 2-0:1.0: hub_suspend
<7>[ 83.623168] usb usb2: bus auto-suspend
<3>[ 85.244903] init: untracked pid 2459 exited
<3>[ 93.187957] init: untracked pid 2669 exited
<3>[ 93.189483] init: untracked pid 2663 exited
<5>[ 94.666656] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
<3>[ 94.666687] CIFS VFS: Send error in SessSetup = -13
<3>[ 94.666717] CIFS VFS: cifs_mount failed w/return code = -13
<4>[ 103.904449] SOC timeout
<5>[ 122.943725] CPU1: shutdown
<4>[ 130.748413] CPU1: Booted secondary processor
<5>[ 195.685943] CPU1: shutdown
<4>[ 196.248687] CPU1: Booted secondary processor
<5>[ 201.693664] CPU1: shutdown
<4>[ 204.809234] CPU1: Booted secondary processor
<5>[ 221.912597] CPU1: shutdown
<4>[ 225.143615] CPU1: Booted secondary processor
<5>[ 228.490539] CPU1: shutdown
<4>[ 229.586090] CPU1: Booted secondary processor
<5>[ 229.772003] CPU1: shutdown
<4>[ 232.767028] CPU1: Booted secondary processor
<5>[ 234.498809] CPU1: shutdown

@trevd
0017 is for alcatel x225 that they talk at the link you gave me
But x200 must change to 0000 as i found here
Click to expand...
Click to collapse
Looks like I've sent you on a bit of a merry dance then! My apologies for that. Good Luck

no problem trevd, this is another way to learn even more stuff
Do you see anything interesting in cajl's dmesg?
I don't see a tty# assigned to his 3G stick nor the usb_modeswitch output.

no problem trevd, this is another way to learn even more stuff
Click to expand...
Click to collapse
I like that outlook, it's exactly how I see it. I know as much about what doesn't work as what does
Anyway there's nothing going on regarding mode switching in that boot sequence, It's just kicking up it's default mode.
I'm thinking it's probably doing it's magic In android it's self and you might gain some
insight from looking there.
I've been playing with the archos 3g stuff lately as I want to enable any dongle on the device.
I was originally going to patch UsbKeyManager.apk in the system/app folder as this is where everything happens with regards to the archos stick (It Seems! ) - The Apk does the modeswitching and starting/stopping of the Android Radio Interface Layer (ril) , which is along with your modem drivers and pppd (?) is all you technically need to get a connection through Android to the outside world
If you haven't already doing getprops from the command line will give you an insight into what android thinks it's got and have a look at logcat to monitor what's going on.
I'd Reset the modem back to how it was and try it in the unrooted stock to see if it works......It's suppose to, right. lol
I'd probably try all the different combination of modeswitch, but that's is very much at your own risk.

I decompiled classes.dex from UsbKeyManager.apk and i'm looking through the .class files but i don't know java so i understand very little from it...
I've attached the .class files if someone knows how to read them better...

Well, I've learnt to use my 3G stick in Linux. I have a model different from those discussed at the above links:
Code:
# lsusb
Bus 001 Device 013: ID 1bbb:00b7 T & A Mobile Phones
..................................
# lsusb -vd 1bbb:00b7
Bus 001 Device 013: ID 1bbb:00b7 T & A Mobile Phones
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1bbb T & A Mobile Phones
idProduct 0x00b7
bcdDevice 0.00
iManufacturer 3 USBModem
iProduct 2 HSPA Data Card
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 131
bNumInterfaces 5
bConfigurationValue 1
iConfiguration 1 USBModem Configuration
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Note that ProductID=00b7. And the box opens as is, without any secrets. All what is needed is to load usbserial manually onto it :
Code:
# modprobe usbserial vendor=0x1bbb product=0x00b7
As the module settles into system, it creates /dev/ttyUSB0 thru 4, the latter two ports being suitable to access the modem in usual way. NetManager quickly recognizes it and tries to establish a connection.
The sad thing is that my KB and mouse were frozen a few times during this, for about a minute. Apparently the entire USB subsystem is hang. Then the problem seems to go away by itself. It's worth trying the latest kernel 3.2.6, there have been multiple improvements in usb since my 2.6.38.
To activate the modem automatically, the following file in /etc/udev/rules.d/50-someting.rules should be sufficient:
Code:
SUBSYSTEM=="usb", SYSFS{idVendor}=="1bbb", SYSFS{idProduct}=="00b7", RUN+="/sbin/modprobe usbserial vendor=0x1bbb product=0x00b7"

just tried your modprobe method and is not producing any output.
none in dmesg and none with -v option.

E400-Kernel 3.x

Regarding http://forum.xda-developers.com/showthread.php?t=2229798&page=8 is OP back?
I was wondering how is possible to make an working kernel from that sources as there is totally wrong setup for L3-E400 board.
Can someone provide dmesg log here? I can bet that 2x2 cannot work here, same as why is problem with registering other devices.
So, let Me explain this (from config)
#1 CONFIG_SENSORS_BMA2X2
is wrong option as E400 have BMA250 triaxial low-g acceleration sensor.
#2 **** with APDS9190 will not work... as E400 have BMC050 6-axis digital e-compass (it is enabled from config, but will not work as addresses is wrong).
#3 CONFIG_BACKLIGHT_RT9396
will not work as E400 have backlight control over BU61800.
#4 vee3 board is not compatible with E0 (E400) board but with M4 (L5) so, 'almost same' configuration will not work on E400 (E0) board without tuning or porting code.
Once again, please, someone who have that Kernel working, please provide dmesg.
Thx

fergy said:
Regarding http://forum.xda-developers.com/showthread.php?t=2229798&page=8 is OP back?
I was wondering how is possible to make an working kernel from that sources as there is totally wrong setup for L3-E400 board.
Can someone provide dmesg log here? I can bet that 2x2 cannot work here, same as why is problem with registering other devices.
So, let Me explain this (from config)
#1 CONFIG_SENSORS_BMA2X2
is wrong option as E400 have BMA250 triaxial low-g acceleration sensor.
#2 **** with APDS9190 will not work... as E400 have BMC050 6-axis digital e-compass (it is enabled from config, but will not work as addresses is wrong).
#3 CONFIG_BACKLIGHT_RT9396
will not work as E400 have backlight control over BU61800.
#4 vee3 board is not compatible with E0 (E400) board but with M4 (L5) so, 'almost same' configuration will not work on E400 (E0) board without tuning or porting code.
Once again, please, someone who have that Kernel working, please provide dmesg.
Thx
Click to expand...
Click to collapse
So, to reply to Myself:
#1 BMA2x2
<6>[ 1.992438] bma2x2_probe
<6>[ 2.243759] Bosch Sensortec Device not foundi2c error 8063
<4>[ 2.244029] i2c-core: driver [bma2x2] using legacy suspend method
<4>[ 2.244374] i2c-core: driver [bma2x2] using legacy resume method
<4>[ 2.244629]
<4>[ 2.244636] <6><><bmm_probe><1174>function entrance
<4>[ 2.245148]
<4>[ 2.245153] <6><><bmm_wakeup><193>waking up the chip...
<4>[ 4.020973]
<4>[ 4.020979] <6><><bmm_wakeup><209>wake up result: fail, tried times: 6
Click to expand...
Click to collapse
+BMC050 (as is is BMC http://www.bosch-sensortec.com/en/homepage/products_3/6_axis_sensors_2/ecompass/bmc050_1/bmc050, NOT bmm) :
<4>[ 4.021373] [E]<3><><bmm_probe><1193>Cannot wake up bmm050, I2C xfer error
<4>[ 4.021903] bmm050: probe of 4-0012 failed with error -5
Click to expand...
Click to collapse
#2 APDS9190:
<6>[ 4.075116] apds9190_probe,Proximity apds9190_init_client Fail in Probe
<6>[ 4.075329] proximity_apds9190 5-0039: probe error
Click to expand...
Click to collapse
#3 RT9396:
4>[ 0.513224] rt9396 init start
<6>[ 0.513616] rt9396bl:rt9396_probe: start, client addr=0x54
<7>[ 0.514189] Registered led device: lcd-backlight
<3>[ 0.514208] rt9396bl:rt9396_probe: Registering led class dev successfully.
<7>[ 0.514679] Registered led device: button-backlight
<3>[ 0.514696] rt9396bl:rt9396_probe: Registering led class dev successfully.
<3>[ 0.515536] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x34)
<6>[ 0.515883] rt9396bl:rt9396_set_table: i2c failed addr:131, value:52
<3>[ 0.516679] rt9396bl:rt9396_write: fail to write(reg=0x93,val=0x5)
<6>[ 0.517026] rt9396bl:rt9396_set_table: i2c failed addr:147, value:5
<3>[ 0.517964] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x14)
<4>[ 0.518169] [rt9396_send_intensity] LCD-backlight ON !!!!! val:20
Click to expand...
Click to collapse
Register, but cannot write registers...fail (as actual device is BU61800 and msm's pmic)
.. sooo, please, someone who have that Kernel 'REAL' working with registering all devices (without sensors as OP say's) please provide dmesg from that WORKING Kernel.
Thx

fergy said:
So, to reply to Myself:
#1 BMA2x2
+BMC050 (as is is BMC http://www.bosch-sensortec.com/en/homepage/products_3/6_axis_sensors_2/ecompass/bmc050_1/bmc050, NOT bmm) :
#2 APDS9190:
#3 RT9396:
Register, but cannot write registers...fail (as actual device is BU61800 and msm's pmic)
.. sooo, please, someone who have that Kernel 'REAL' working with registering all devices (without sensors as OP say's) please provide dmesg from that WORKING Kernel.
Thx
Click to expand...
Click to collapse
try looking at lproj 3.4 kernel on teamhacklg github. it has a e400 defconfig. maybe it's a good starting point for you. http://github.com/teamhacklg. sorry spoke to soon, there's no defconfig.

tudorsirb said:
try looking at lproj 3.4 kernel on teamhacklg github. it has a e400 defconfig. maybe it's a good starting point for you. http://github.com/teamhacklg. sorry spoke to soon, there's no defconfig.
Click to expand...
Click to collapse
I have right config for board, but as I say above, there is wrong pin configuration, wrong registers, so that must to be fixed if one expect to get sensors working.
Hacklg have config for 2.6 kernel, not for 3.x
In attach is My config for 3.4

fergy said:
I have right config for board, but as I say above, there is wrong pin configuration, wrong registers, so that must to be fixed if one expect to get sensors working.
Hacklg have config for 2.6 kernel, not for 3.x
In attach is My config for 3.4
Click to expand...
Click to collapse
thank you fergy, just getting back to compiling

hecatae said:
thank you fergy, just getting back to compiling
Click to expand...
Click to collapse
BTW, right registers for L3:
Touch GPIO:
Code:
I2C_SDA 10
I2C_SCL 9
IRQ 39
I2C_SLAVE_ADDR 0x48
Sensor GPIO:
Code:
I2C_SCL 49
I2C_SDA 48
Accel GPIO:
Code:
GPIO_INT 94
GPIO_I2C_SCL 49
GPIO_I2C_SDA 48
I2C_ADDRESS 0x48
Compas GPIO:
Code:
I2C_SCL 49
I2C_SDA 48
GPIO_INT 35
I2C_ADDRESS 0x10
Proxi GPIO:
Code:
I2C_SCL 16
I2C_SDA 30
GPIO_DOUT 17
I2C_ADDRESS 0x44
LDO_NO_VCC 1
Note that You must rearrange voltage @Board-msm7x27a-regulator:
Code:
PCOM_VREG_LDO(ldo01, 12, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo02, 13, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo03, 49, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, n),
EDIT:
As from technical specs, power module must to give right power voltage for specific part of hardware so it can run.
Also, the rest of power registers:
Code:
PCOM_VREG_SMP(smps1, 3, NULL, 1100000, 1100000, 0, -1, 0, 0, 0, 0, s),
PCOM_VREG_SMP(smps2, 4, NULL, 1100000, 1100000, 0, -1, 0, 0, 0, 0, s),
PCOM_VREG_SMP(smps3, 2, NULL, 1800000, 1800000, 0, -1, 0, 0, 0, 0, s),
PCOM_VREG_SMP(smps4, 24, NULL, 2100000, 2100000, 0, -1, 0, 0, 0, 0, s),
PCOM_VREG_LDO(ldo01, 12, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, p), /* fergy(from shematics) : <lcd operating at 1.8v: VREG_MSME_1.8V, lcd firmware loader need 3.3v and other functions need 2.8v: VREG_LCD_2.8V> so ldo01 need this change here */
PCOM_VREG_LDO(ldo02, 13, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, p), /* min (1200000 -> 3300000) */
PCOM_VREG_LDO(ldo03, 49, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, n), /* min (1200000 -> 3300000) */
PCOM_VREG_LDO(ldo04, 50, NULL, 800000, 2850000, 0, -1, 0, 0, 0, 0, n), /* min (800000 -> 2850000) */
PCOM_VREG_LDO(ldo05, 45, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, n), /* min (1200000 -> 3300000) */
PCOM_VREG_LDO(ldo06, 51, NULL, 1200000, 1200000, 0, -1, 0, 0, 0, 0, n), /* min (1200000 -> 3300000) */
PCOM_VREG_LDO(ldo07, 0, NULL, 2600000, 2600000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo08, 9, NULL, 2850000, 2850000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo09, 44, NULL, 1800000, 1800000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo10, 52, NULL, 2800000, 3000000, 0, -1, 0, 0, 0, 0, p), /* min (2800000 -> 3000000) */
PCOM_VREG_LDO(ldo11, 53, NULL, 1800000, 1800000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo12, 21, NULL, 2850000, 2850000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo13, 18, NULL, 2850000, 2850000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo14, 16, NULL, 3300000, 3300000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo15, 54, NULL, 1800000, 2850000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo16, 19, NULL, 3000000, 3000000, 0, -1, 0, 0, 0, 0, p), /* NFC 3.0 V */
PCOM_VREG_LDO(ldo17, 56, NULL, 3000000, 3300000, 0, -1, 0, 0, 0, 0, p), /* min (3000000 -> 3300000) */
PCOM_VREG_LDO(ldo18, 11, NULL, 2700000, 2700000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo19, 57, NULL, 1200000, 1800000, 0, -1, 0, 0, 0, 0, p), /* min (1200000 -> 1800000) */
/* not used vreg_ncp */
PCOM_VREG_NCP(ncp, 31, NULL, -1800000, -1800000, 0, 0, 0, 0, 0),
as per old regulato code:
Code:
RT8053_VREG_INIT(LDO1, 1200000, 3300000),
RT8053_VREG_INIT(LDO2, 1200000, 3300000),
RT8053_VREG_INIT(LDO3, 1200000, 3300000),
RT8053_VREG_INIT(LDO4, 800000, 2850000),
RT8053_VREG_INIT(LDO5, 1200000, 3300000),
RT8053_VREG_INIT(DCDC1, 800000, 2300000),

In attachments 7225A pinouts and LCD pinouts....
Enjoy in research.
PS, if You need any help, PM or em[email protected]
Cheers
PS2:
LOG from My Kernel:
Code:
<6>[-----------------------][ 0.000000] Booting Linux on physical CPU 0
<6>[-----------------------][ 0.000000] Initializing cgroup subsys cpu
<5>[-----------------------][ 0.000000] Linux version 3.4.0 ([email protected]) (gcc version 4.4.3 (GCC) ) #48 PREEMPT Wed Oct 23 00:39:38 CEST 2013
<4>[-----------------------][ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
<4>[-----------------------][ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[-----------------------][ 0.000000] Machine: LG MSM7225AB
<6>[-----------------------][ 0.000000] memory pool 3 (start 26600000 size 1a00000) initialized
<4>[-----------------------][ 0.000000] Memory policy: ECC disabled, Data cache writeback
<1>[-----------------------][ 0.000000] Initialized strongly ordered page successfully
<3>[-----------------------][ 0.000000] smem_find(137, 80): wrong size 64
<3>[-----------------------][ 0.000000] smem_find(137, 72): wrong size 64
<6>[-----------------------][ 0.000000] socinfo_init: v4, id=99, ver=1.1, raw_id=1540, raw_ver=1, hw_plat=2, hw_plat_ver=65536
<6>[-----------------------][ 0.000000] L310 cache controller enabled
<6>[-----------------------][ 0.000000] l2x0: 8 ways, CACHE_ID 0x410054c7, AUX_CTRL 0x00540000, Cache size: 262144 B
<7>[-----------------------][ 0.000000] On node 0 totalpages: 78592
<7>[-----------------------][ 0.000000] free_area_init_node: node 0, pgdat c092474c, node_mem_map c1055800
<7>[-----------------------][ 0.000000] Normal zone: 1436 pages used for memmap
<7>[-----------------------][ 0.000000] Normal zone: 0 pages reserved
<7>[-----------------------][ 0.000000] Normal zone: 77156 pages, LIFO batch:15
<6>[-----------------------][ 0.000000] allocating 1843200 bytes at c15f8000 (17f8000 physical) for fb
<6>[-----------------------][ 0.000000] Initialized persistent memory from 0ff00000-0ff3dffe
<7>[-----------------------][ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[-----------------------][ 0.000000] pcpu-alloc: [0] 0
<4>[-----------------------][ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 77156
<5>[-----------------------][ 0.000000] Kernel command line: androidboot.hardware=e0 lge.rev=rev_12 lge.reboot=reboot uart_console=disable lge.frst=flag3 kcal=000000000000000000 androidboot.emmc=true androidboot.serialno=1e2bf5 androidboot.baseband=msm
<6>[-----------------------][ 0.000000] BOARD: LGE rev_12
<6>[-----------------------][ 0.000000] rebootmode_setup , reboot_mode = 0
<6>[-----------------------][ 0.000000] UART CONSOLE : disable
<6>[-----------------------][ 0.000000] FRST MODE : flag3
<6>[-----------------------][ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[-----------------------][ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[-----------------------][ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[-----------------------][ 0.000000] Memory: 205MB 102MB = 307MB total
<5>[-----------------------][ 0.000000] Memory: 297260k/297260k available, 43732k reserved, 0K highmem
<5>[-----------------------][ 0.000000] Virtual kernel memory layout:
<5>[-----------------------][ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[-----------------------][ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[-----------------------][ 0.000000] vmalloc : 0xd5000000 - 0xff000000 ( 672 MB)
<5>[-----------------------][ 0.000000] lowmem : 0xc0000000 - 0xd4d00000 ( 333 MB)
<5>[-----------------------][ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5>[-----------------------][ 0.000000] .text : 0xc0008000 - 0xc0847368 (8445 kB)
<5>[-----------------------][ 0.000000] .init : 0xc0848000 - 0xc087a000 ( 200 kB)
<5>[-----------------------][ 0.000000] .data : 0xc087a000 - 0xc0940fb0 ( 796 kB)
<5>[-----------------------][ 0.000000] .bss : 0xc0940fd4 - 0xc0b32100 (1989 kB)
<6>[-----------------------][ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>[-----------------------][ 0.000000] NR_IRQS:645
<6>[-----------------------][ 0.000000] sched_clock: 27 bits at 600kHz, resolution 1666ns, wraps every 223696ms
<6>[-----------------------][ 0.000000] Console: colour dummy device 80x30
<6>[-----------------------][ 0.000000] console [tty0] enabled
<6>[-----------------------][ 0.001876] Calibrating delay loop... 298.59 BogoMIPS (lpj=1492992)
<6>[-----------------------][ 0.070119] pid_max: default: 32768 minimum: 301
<6>[-----------------------][ 0.070631] Mount-cache hash table entries: 512
<6>[-----------------------][ 0.071753] Initializing cgroup subsys cpuacct
<6>[-----------------------][ 0.071818] Initializing cgroup subsys devices
<6>[-----------------------][ 0.071871] Initializing cgroup subsys freezer
<6>[-----------------------][ 0.071919] Initializing cgroup subsys net_cls
<6>[-----------------------][ 0.072024] CPU: Testing write buffer coherency: ok
<6>[-----------------------][ 0.072586] hw perfevents: enabled with ARMv7 Cortex-A5 PMU driver, 3 counters available
<6>[-----------------------][ 0.072834] Setting up static identity map for 0x7d3118 - 0x7d317c
<6>[-----------------------][ 0.083881] dummy:
<6>[-----------------------][ 0.084523] NET: Registered protocol family 16
<6>[-----------------------][ 0.086551] gpiochip_add: registered GPIOs 0 to 15 on device: generic
<6>[-----------------------][ 0.086748] gpiochip_add: registered GPIOs 16 to 42 on device: generic
<6>[-----------------------][ 0.086933] gpiochip_add: registered GPIOs 43 to 67 on device: generic
<6>[-----------------------][ 0.087176] gpiochip_add: registered GPIOs 68 to 94 on device: generic
<6>[-----------------------][ 0.087364] gpiochip_add: registered GPIOs 95 to 106 on device: generic
<6>[-----------------------][ 0.087549] gpiochip_add: registered GPIOs 107 to 132 on device: generic
<6>[-----------------------][ 0.088831] Shared PLL control available.
<6>[-----------------------][ 0.092576] acpuclk_7627_probe()
<6>[-----------------------][ 0.093818] ACPU running at 600000 KHz
<6>[-----------------------][ 0.093869] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 D4 U0 U1 U2 U4
<6>[-----------------------][ 0.093949] 0 19200 5 1 2400 4 30720 -1 -1 -1 -1 5 3 4 6
<6>[-----------------------][ 0.094026] 1 61440 1 4 7680 4 61440 -1 -1 -1 -1 5 3 4 6
<6>[-----------------------][ 0.094101] 2 122880 1 2 15360 4 61440 -1 1 -1 -1 7 3 4 6
<6>[-----------------------][ 0.094178] 3 245760 1 1 30720 4 61440 -1 1 -1 -1 7 -1 8 6
<6>[-----------------------][ 0.094254] 4 300000 2 4 37500 4 122880 -1 1 -1 -1 7 -1 8 6
<6>[-----------------------][ 0.094331] 5 320000 0 3 40000 4 122880 -1 1 4 -1 7 -1 8 6
<6>[-----------------------][ 0.094408] 6 400000 4 2 50000 4 122880 5 1 4 -1 7 -1 8 9
<6>[-----------------------][ 0.094483] 7 480000 0 2 60000 4 122880 5 2 4 6 -1 -1 8 9
<6>[-----------------------][ 0.094559] 8 600000 2 2 75000 4 160000 5 3 4 6 -1 -1 -1 9
<6>[-----------------------][ 0.094636] 9 800000 4 1 100000 4 200000 7 -1 8 6 -1 -1 -1 -1
<6>[-----------------------][ 0.094703] CPU0: 6 scaling frequencies supported.
<6>[-----------------------][ 0.095214] smps1: 1100 mV normal
<6>[-----------------------][ 0.095743] smps2: 1100 mV normal
<6>[-----------------------][ 0.096164] smps3: 1800 mV normal
<6>[-----------------------][ 0.096599] smps4: 2100 mV normal
<6>[-----------------------][ 0.097064] ldo01: 1200 <--> 3300 mV normal
<6>[-----------------------][ 0.097509] ldo02: 1200 <--> 3300 mV normal
<6>[-----------------------][ 0.097953] ldo03: 1200 <--> 3300 mV normal
<6>[-----------------------][ 0.098393] ldo04: 800 <--> 2850 mV normal
<6>[-----------------------][ 0.098834] ldo05: 1200 <--> 3300 mV normal
<6>[-----------------------][ 0.099313] ldo06: 1200 mV normal
<6>[-----------------------][ 0.099759] ldo07: 2600 mV normal
<6>[-----------------------][ 0.100199] ldo08: 2850 mV normal
<6>[-----------------------][ 0.100731] ldo09: 1800 mV normal
<6>[-----------------------][ 0.101181] ldo10: 2800 <--> 3000 mV normal
<6>[-----------------------][ 0.101678] ldo11: 1800 mV normal
<6>[-----------------------][ 0.102103] ldo12: 2850 mV normal
<6>[-----------------------][ 0.102574] ldo13: 2850 mV normal
<6>[-----------------------][ 0.103053] ldo14: 3300 mV normal
<6>[-----------------------][ 0.103509] ldo15: 1800 <--> 2850 mV normal
<6>[-----------------------][ 0.103969] ldo16: 3000 mV normal
<6>[-----------------------][ 0.104403] ldo17: 3000 <--> 3300 mV normal
<6>[-----------------------][ 0.104868] ldo18: 2700 mV normal
<6>[-----------------------][ 0.105323] ldo19: 1200 <--> 1800 mV normal
<6>[-----------------------][ 0.105784] ncp: 1800 mV normal
<6>[-----------------------][ 0.108236] persistent_ram: uncorrectable error in header
<6>[-----------------------][ 0.108313] persistent_ram: no valid data in buffer (sig = 0x00000000)
<6>[-----------------------][ 0.134009] console [ram-1] enabled
<4>[-----------------------][ 0.135923] smps3: Failed to create debugfs directory
<6>[-----------------------][ 0.136394] ebi2_tovis_power_save: on=1
<5>[-----------------------][ 0.141893] Boot Reason = 0x01
<6>[-----------------------][ 0.142263] CRASH LOG START ADDR : 0xcf3e000
<6>[-----------------------][ 0.142609] CRASH LOG END ADDR : 0xcf3efff
<6>[-----------------------][ 0.148831] fs_gfx3d: normal
<6>[-----------------------][ 0.189384] bio: create slab <bio-0> at 0
<6>[-----------------------][ 0.190898] ION heap vmalloc created
<6>[-----------------------][ 0.191329] ION heap camera_preview created at 26600000 with size 1000000
<6>[-----------------------][ 0.191736] ION heap audio created at 27600000 with size 22e000
<6>[-----------------------][ 0.192001] ION heap sf created at 2782e000 with size 7a0000
<5>[-----------------------][ 0.193088] SCSI subsystem initialized
<6>[-----------------------][ 0.193954] usbcore: registered new interface driver usbfs
<6>[-----------------------][ 0.194446] usbcore: registered new interface driver hub
<6>[-----------------------][ 0.195166] usbcore: registered new device driver usb
<6>[-----------------------][ 0.196259] i2c-gpio i2c-gpio.2: using pins 112 (SDA) and 111 (SCL)
<6>[-----------------------][ 0.196898] i2c-gpio i2c-gpio.3: using pins 10 (SDA) and 9 (SCL)
<6>[-----------------------][ 0.197789] i2c-gpio i2c-gpio.4: using pins 48 (SDA) and 49 (SCL)
<6>[-----------------------][ 0.198544] i2c-gpio i2c-gpio.5: using pins 30 (SDA) and 16 (SCL)
<6>[-----------------------][ 0.198966] Linux media interface: v0.10
<6>[-----------------------][ 0.199259] Linux video capture interface: v2.00
<6>[-----------------------][ 0.200178] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[-----------------------][ 0.201623] Bluetooth: Core ver 2.16
<6>[-----------------------][ 0.201926] NET: Registered protocol family 31
<6>[-----------------------][ 0.202276] Bluetooth: HCI device and connection manager initialized
<6>[-----------------------][ 0.202509] Bluetooth: HCI socket layer initialized
<6>[-----------------------][ 0.202861] Bluetooth: L2CAP socket layer initialized
<6>[-----------------------][ 0.203661] Bluetooth: SCO socket layer initialized
<6>[-----------------------][ 0.204669] cfg80211: Calling CRDA to update world regulatory domain
<6>[-----------------------][ 0.206219] Switching to clocksource dg_timer
<6>[-----------------------][ 0.256563] NET: Registered protocol family 2
<6>[-----------------------][ 0.257419] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[-----------------------][ 0.259088] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[-----------------------][ 0.261809] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
<6>[-----------------------][ 0.263358] TCP: Hash tables configured (established 16384 bind 16384)
<6>[-----------------------][ 0.263611] TCP: reno registered
<6>[-----------------------][ 0.264063] UDP hash table entries: 256 (order: 1, 12288 bytes)
<6>[-----------------------][ 0.264561] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
<6>[-----------------------][ 0.265464] NET: Registered protocol family 1
<6>[-----------------------][ 0.266373] Unpacking initramfs...
<6>[-----------------------][ 0.306193] Freeing initrd memory: 320K
<3>[-----------------------][ 0.313148] Notify: smsm init
<4>[-----------------------][ 0.313904] get_nand_partitions: no flash partition table in shared memory
<6>[-----------------------][ 0.321429] rpcrouter_smd_remote_notify: smd opened 0x (null)
<3>[-----------------------][ 0.325761] rpcrouter: Server create rejected, version = 0, program = 3000003b
<6>[-----------------------][ 0.330666] [adsp.c:adsp_init] rs00000000 -- 0
<6>[-----------------------][ 0.332506] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[-----------------------][ 0.332884] [audpp.c:audpp_probe] Number of concurrency supported 8
<6>[-----------------------][ 0.333251] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[-----------------------][ 0.333473] [audpp.c:audpp_probe] queueid:13
<6>[-----------------------][ 0.333819] [audpp.c:audpp_probe] decid:0
<6>[-----------------------][ 0.334166] [audpp.c:audpp_probe] nr_codec_support:11
<6>[-----------------------][ 0.334383] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[-----------------------][ 0.334739] [audpp.c:audpp_probe] queueid:14
<6>[-----------------------][ 0.334944] [audpp.c:audpp_probe] decid:1
<6>[-----------------------][ 0.335288] [audpp.c:audpp_probe] nr_codec_support:11
<6>[-----------------------][ 0.335643] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[-----------------------][ 0.335863] [audpp.c:audpp_probe] queueid:15
<6>[-----------------------][ 0.336209] [audpp.c:audpp_probe] decid:2
<6>[-----------------------][ 0.336414] [audpp.c:audpp_probe] nr_codec_support:11
<6>[-----------------------][ 0.350538] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[-----------------------][ 0.350906] [audpp.c:audpp_probe] queueid:16
<6>[-----------------------][ 0.351254] [audpp.c:audpp_probe] decid:3
<6>[-----------------------][ 0.351459] [audpp.c:audpp_probe] nr_codec_support:11
<6>[-----------------------][ 0.351814] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[-----------------------][ 0.352173] [audpp.c:audpp_probe] queueid:17
<6>[-----------------------][ 0.352379] [audpp.c:audpp_probe] decid:4
<6>[-----------------------][ 0.352724] [audpp.c:audpp_probe] nr_codec_support:1
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** CUT *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
<4>[-----------------------][ 0.612901] BU61800 init start
<7>[-----------------------][ 0.613764] Registered led device: lcd-backlight
<3>[-----------------------][ 0.613788] bu61800bl:bu61800_probe: Registering led class dev successfully.
<7>[-----------------------][ 0.614201] Registered led device: button-backlight
<3>[-----------------------][ 0.614221] bu61800bl:bu61800_probe: Registering led class dev successfully.
<3>[-----------------------][ 0.618993] bu61800bl:bu61800_probe: done
<6>[-----------------------][ 0.622471] setting pdata->panel_info.fb_num to 3. type: 2
<6>[-----------------------][ 0.624686] FrameBuffer[0] 240x320 size=491520 bytes is registered successfully!
<4>[-----------------------][ 0.625536] Read GPIO LCD port 1
<6>[-----------------------][ 0.909313] input: touch_mcs8000 as /devices/virtual/input/input0
<7>[-----------------------][ 0.909939] evbug: Connected device: input0 (touch_mcs8000 at unknown)
<6>[-----------------------][ 0.910596] ts_set_veg : 0
<6>[-----------------------][ 0.936828] ts_set_veg : 1
<6>[-----------------------][ 0.976683] Touchscreen is connected to the board
<4>[-----------------------][ 1.049021] <MELFAS> CORE_VERSION : 0x D
<4>[-----------------------][ 1.050483] GPIO Matrix Keypad Driver: Start keypad matrix for e0_keypad in interrupt mode
<6>[-----------------------][ 1.051456] input: e0_keypad as /devices/virtual/input/input1
<7>[-----------------------][ 1.052071] evbug: Connected device: input1 (e0_keypad at unknown)
<6>[-----------------------][ 1.053309] Bosch Sensortec Device detected!
<6>[-----------------------][ 1.053323] BMA250 registered I2C driver!
<6>[-----------------------][ 1.054269] input: bma250 as /devices/virtual/input/input2
<7>[-----------------------][ 1.054696] evbug: Connected device: input2 (bma250 at unknown)
<4>[-----------------------][ 1.056076]
<4>[-----------------------][ 1.056084] [I]<6><><bmm_probe><1174>function entrance
<4>[-----------------------][ 1.056689]
<4>[-----------------------][ 1.056698] [I]<6><><bmm_wakeup><193>waking up the chip...
<4>[-----------------------][ 1.061524]
<4>[-----------------------][ 1.061533] [I]<6><><bmm_wakeup><209>wake up result: succeed, tried times: 2
<4>[-----------------------][ 1.062076]
<4>[-----------------------][ 1.062083] [I]<6><><bmm_probe><1198>register dump after waking up
<7>[-----------------------][ 1.062641] 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
<7>[-----------------------][ 1.062653]
<7>[-----------------------][ 1.071508] 32 01 01 00 01 00 01 00 00 00 00 01 06 3f 07 00
<7>[-----------------------][ 1.071519] 00 00 00 ff 00 1c a5 42 00 a0 36 63 1a ff 0b 00
<7>[-----------------------][ 1.071531] 46 28 28 00 fd fd 0c 00 00 03 39 54 07 1a 35 fe
<7>[-----------------------][ 1.071541] fe 1c ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<7>[-----------------------][ 1.071553]
<4>[-----------------------][ 1.072181]
<4>[-----------------------][ 1.072188] [I]<6><><bmm_check_chip_id><144>read chip id result: 0x32
<4>[-----------------------][ 1.072874]
<4>[-----------------------][ 1.072881] [N]<5><><bmm_probe><1203>Bosch Sensortec Device bmm050 detected
<6>[-----------------------][ 1.073799] input: bmm050 as /devices/virtual/input/input3
<7>[-----------------------][ 1.074198] evbug: Connected device: input3 (bmm050 at unknown)
<7>[-----------------------][ 1.087289] 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
<7>[-----------------------][ 1.087303]
<7>[-----------------------][ 1.096151] 32 01 01 00 01 00 01 00 00 00 00 01 06 3f 07 00
<7>[-----------------------][ 1.096163] 00 04 0f ff 00 1c a5 42 00 a0 36 63 1a ff 0b 00
<7>[-----------------------][ 1.096174] 46 28 28 00 fd fd 0c 00 00 03 39 54 07 1a 35 fe
<7>[-----------------------][ 1.096184] fe 1c ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<7>[-----------------------][ 1.096196]
<4>[-----------------------][ 1.097356]
<4>[-----------------------][ 1.097364] [N]<5><><bmm_probe><1295>sensor bmm050 probed successfully
From CM:
Code:
--------- beginning of /dev/log/main
I/cm ( 112): ____ _ _ ____ _ _ ____ ____ ____ _ _ _ _ ____ ___
I/cm ( 113): | \_/ |__| |\ | | | | __ |___ |\ | |\/| | | | \
I/cm ( 114): |___ | | | | \| |__| |__] |___ | \| | | |__| |__/
I/cm ( 117): Welcome to Android 4.3 / CyanogenMod-10.2-20131009-UNOFFICIAL-e400

Nobody? Nothing? Why?

fergy said:
Nobody? Nothing? Why?
Click to expand...
Click to collapse
I dont think there are some other devs from l3 who can help u! But u've done a rly good work, yet! So we are pleased to see a first build of cm10/1/2/3 or even 11
The whole l3 comunity will apprecate your work!

All drivers are there in the LG E600 kernel, you just have to make a proper config file, compile and boot. You may have to debug using ADB a few times but if you have enough spare time, in few hours, one day at most, you should be able to boot it.
Don't try to boot the kernel with an Android 2.3 or 4.0 image because it won't work. Use CM10 or, better yet, CM10.1.

thank you for your progress till now, waiting to see more progress and a bootable cm10.1/2 port !

Anyone developing this kernel, please linger on freenode, channel #teamhacklg. I will normally be on, and I will assist where I can.
Sent from my Nexus 7 using Tapatalk

cybojenix said:
Anyone developing this kernel, please linger on freenode, channel #teamhacklg. I will normally be on, and I will assist where I can.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
finally in a position to start some development, on #teamhacklg too.
if anyone wants to look a tthe experimental 3.4 kernel, it's here: https://github.com/TeamHackLG/lge-kernel-lproj

hecatae said:
finally in a position to start some development, on #teamhacklg too.
if anyone wants to look a tthe experimental 3.4 kernel, it's here: https://github.com/TeamHackLG/lge-kernel-lproj
Click to expand...
Click to collapse
https://github.com/TeamHackLG/lge-kernel-lproj/tree/l3/3.4/4.1

cybojenix said:
https://github.com/TeamHackLG/lge-kernel-lproj/tree/l3/3.4/4.1
Click to expand...
Click to collapse
Code:
--------- beginning of /dev/log/main
I/cm ( 116): Welcome to Android 4.1.2 / CyanogenMod-10-20131116-UNOFFICIAL-e400
I/cm ( 117): _
I/cm ( 118): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 119): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
I/cm ( 120): )) _))
I/cm ( 121):
I/DEBUG ( 126): debuggerd: Nov 16 2013 15:02:12

and??
Post more

cr3pt said:
and??
Post more
Click to expand...
Click to collapse
Code:
<6>[ 0.293793] ION heap camera_preview created at 26600000 with size 1000000
<6>[ 0.294124] ION heap audio created at 27600000 with size 22e000
<6>[ 0.294333] ION heap sf created at 2782e000 with size 7a0000
<5>[ 0.295201] SCSI subsystem initialized
<6>[ 0.295699] usbcore: registered new interface driver usbfs
<6>[ 0.295979] usbcore: registered new interface driver hub
<6>[ 0.296479] usbcore: registered new device driver usb
<6>[ 0.297118] i2c-gpio i2c-gpio.2: using pins 112 (SDA) and 111 (SCL)
<6>[ 0.297673] i2c-gpio i2c-gpio.3: using pins 10 (SDA) and 9 (SCL)
<6>[ 0.298198] i2c-gpio i2c-gpio.4: using pins 35 (SDA) and 13 (SCL)
<6>[ 0.298759] i2c-gpio i2c-gpio.5: using pins 30 (SDA) and 16 (SCL)
<6>[ 0.299314] i2c-gpio i2c-gpio.6: using pins 80 (SDA) and 77 (SCL)
<6>[ 0.299546] Linux media interface: v0.10
<6>[ 0.299778] Linux video capture interface: v2.00
<6>[ 0.300451] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[ 0.301404] Bluetooth: Core ver 2.16
<6>[ 0.301778] NET: Registered protocol family 31
<6>[ 0.301954] Bluetooth: HCI device and connection manager initialized
<6>[ 0.302261] Bluetooth: HCI socket layer initialized
<6>[ 0.302434] Bluetooth: L2CAP socket layer initialized
<6>[ 0.303024] Bluetooth: SCO socket layer initialized
<6>[ 0.304196] Switching to clocksource dg_timer
<6>[ 0.330859] NET: Registered protocol family 2
<6>[ 0.331598] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.332368] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.333163] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.333748] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.333938] TCP: reno registered
<6>[ 0.334114] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.334531] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.335374] NET: Registered protocol family 1
<6>[ 0.335908] Unpacking initramfs...
<6>[ 0.371669] Freeing initrd memory: 320K
<3>[ 0.376664] Notify: smsm init
<4>[ 0.377214] get_nand_partitions: no flash partition table in shared memory
<6>[ 0.381979] rpcrouter_smd_remote_notify: smd opened 0x (null)
<3>[ 0.385018] rpcrouter: Server create rejected, version = 0, program = 3000003b
<3>[ 0.386558] rpcrouter: Server create rejected, version = 0, program = 30000051
<6>[ 0.398306] [adsp.c:adsp_init] msm_adsp -- 0
<6>[ 0.399738] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.399929] [audpp.c:audpp_probe] Number of concurrency supported 8
<6>[ 0.400233] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.400411] [audpp.c:audpp_probe] queueid:13
<6>[ 0.400581] [audpp.c:audpp_probe] decid:0
<6>[ 0.400749] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.400924] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.401224] [audpp.c:audpp_probe] queueid:14
<6>[ 0.401403] [audpp.c:audpp_probe] decid:1
<6>[ 0.401694] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.401871] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.402048] [audpp.c:audpp_probe] queueid:15
<6>[ 0.402339] [audpp.c:audpp_probe] decid:2
<6>[ 0.402511] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.402804] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.402981] [audpp.c:audpp_probe] queueid:16
<6>[ 0.403153] [audpp.c:audpp_probe] decid:3
<6>[ 0.403443] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.403618] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.403913] [audpp.c:audpp_probe] queueid:17
<6>[ 0.404084] [audpp.c:audpp_probe] decid:4
<6>[ 0.404253] [audpp.c:audpp_probe] nr_codec_support:1
<6>[ 0.405756] __msm_rpc_connect: server not found 30000002:20001
<1>[ 0.407821] dma_test_init, minor number 35
<6>[ 0.408194] lge_panic_handler: got buffer at cf3e000, size 1000
<6>[ 0.408574] rmt_storage_get_ramfs: RAMFS entry: addr = 0x0d0c0000, size = 0x00300000
<6>[ 0.408898] rmt_storage_get_ramfs: RAMFS entry: addr = 0x0cfc0000, size = 0x00100000
<6>[ 0.409426] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
<6>[ 0.414814] rmt_storage_set_client_status Entered
<4>[ 0.415849] diagcmd_probe:lg_fw_diagcmd
<6>[ 0.416374] lge_emmc_direct_access_init: started
<6>[ 0.416668] lge_emmc_direct_access_init: finished
<6>[ 0.616374] fuse init (API version 7.18)
<6>[ 0.617114] msgmni has been set to 582
<4>[ 0.617829] cryptomgr_test used greatest stack depth: 7136 bytes left
<6>[ 0.620109] io scheduler noop registered
<6>[ 0.620363] io scheduler cfq registered (default)
<4>[ 0.620878] rt9396 init start
<6>[ 0.621111] rt9396bl:rt9396_probe: start, client addr=0x54
<7>[ 0.621769] Registered led device: lcd-backlight
<3>[ 0.621786] rt9396bl:rt9396_probe: Registering led class dev successfully.
<7>[ 0.622088] Registered led device: button-backlight
<3>[ 0.622103] rt9396bl:rt9396_probe: Registering led class dev successfully.
<3>[ 0.623034] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x34)
<6>[ 0.623219] rt9396bl:rt9396_set_table: i2c failed addr:131, value:52
<3>[ 0.624116] rt9396bl:rt9396_write: fail to write(reg=0x93,val=0x5)
<6>[ 0.624601] rt9396bl:rt9396_set_table: i2c failed addr:147, value:5
<3>[ 0.625386] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x14)
<4>[ 0.625688] [rt9396_send_intensity] LCD-backlight ON !!!!! val:20
<3>[ 0.625869] rt9396bl:rt9396_probe: done
<6>[ 0.628228] setting pdata->panel_info.fb_num to 3. type: 2
<4>[ 0.628949] ### call the initial lut update routine
<4>[ 0.629133] mdp_lut_init_update_lcdc start ..
<4>[ 0.629426] ### mdp_lut_init_update_lcdc mdp_lut_init_update_lcdc++: mdp_lut_i = 0
<4>[ 0.629619] ### mdp_lut_hw_updae++: mdp_lut_i = 0
<4>[ 0.629793] #### Sign is not Matched#### Cal value R=255 G=255 B=255
<4>[ 0.630303] mdp_lut_init_update_lcdc end.........
<6>[ 0.631391] FrameBuffer[0] 240x320 size=491520 bytes is registered successfully!
<6>[ 0.632286] msm_serial: detected port #0
<6>[ 0.632564] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 9) is a MSM
<6>[ 0.633293] msm_serial: driver initialized
<6>[ 0.634191] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 0.634934] msm_serial_hs module loaded
<6>[ 0.637033] LG_FW : diagchar_open succeed
<7>[ 0.637294] LG_FW : CreateWaitThread, diagchar_read 10004 byte
<7>[ 0.637316] LG_FW : CreateWaitThread, diagchar_read 1004 byte
<7>[ 0.637356] LG_FW : CreateWaitThread, diagchar_read 8004 byte
<6>[ 0.637383] diagchar initialized now
<6>[ 0.637551] MTS_TTY: mtsk_tty_init
<6>[ 0.638034] mtsk_tty_init SUCESS MTS_TTY_REGISTERED
<4>[ 0.640509] dalrpc_rcv_DAL0 used greatest stack depth: 7056 bytes left
<6>[ 0.641459] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[ 0.646673] loop: module loaded
<6>[ 0.647171] lge_tty_atcmd_init: initialize atcmd-ttys
<6>[ 0.647608] lge_kcal_init: finished
<6>[ 0.865471] SCSI Media Changer driver v0.25
<6>[ 0.866386] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.866573] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 0.866994] rmnet_init: SMD devices[8]
<6>[ 0.873634] PPP generic driver version 2.4.2
<4>[ 0.874633] kworker/u:1 used greatest stack depth: 6748 bytes left
<4>[ 0.874941] kworker/u:1 used greatest stack depth: 6652 bytes left
<6>[ 0.875961] PPP MPPE Compression module registered
<6>[ 0.876154] NET: Registered protocol family 24
<7>[ 0.876494] gpio_request: gpio-141 (i2c_host_vbus_en) status -22
<3>[ 0.876511] failed to request 141 GPIO
<6>[ 0.877761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.878114] host driver registered w/ tranceiver
<6>[ 0.878616] usbcore: registered new interface driver usb_ehset_test
<6>[ 0.879364] peripheral driver registered w/ tranceiver
<6>[ 0.880416] mbim_init: initialize 1 instances
<6>[ 0.880738] mbim_init: Initialized 1 ports
<6>[ 0.883354] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 0.883558] android_usb gadget: Number of LUNs=1
<6>[ 0.883858] lun0: LUN: removable file: (no medium)
<6>[ 0.885774] android_set_factory_mode : Using Normal Cable (11)
<6>[ 0.886099] android_usb gadget: android_usb ready
<6>[ 0.887154] input: touch_mcs8000 as /devices/virtual/input/input0
<6>[ 1.104546] msm_hsusb_set_vbus_state USB Connection
<6>[ 1.104861] msm_hsusb_set_vbus_state irq conunt is false
<4>[ 1.176676] Touch PRODUCT = LE0, comp_ver = 0
<6>[ 1.176974] Firmware ver : [0],HW ver : [0]
<6>[ 1.177146] .......MFS_ISC_SINGLE update.........
<4>[ 1.177441] <MELFAS> TOUCH IC REBOOT!!!
<4>[ 1.177634] ldo01: Failed to create debugfs directory
<4>[ 1.284431] ldo01: Failed to create debugfs directory
<4>[ 1.394414] <MELFAS> mass erase start
<4>[ 1.394423]
<6>[ 1.415223] android_set_factory_mode : Using Normal Cable (11)
<6>[ 1.644588] android_work: android_work: did not send uevent (0 0 (null))
<4>[ 1.874409] <MELFAS> TOUCH IC REBOOT!!!
<4>[ 1.874759] ldo01: Failed to create debugfs directory
<4>[ 1.984429] ldo01: Failed to create debugfs directory
<4>[ 2.095278] GPIO Matrix Keypad Driver: Start keypad matrix for vee3_keypad in interrupt mode
<6>[ 2.095903] input: vee3_keypad as /devices/virtual/input/input1
<6>[ 2.096653] bma2x2_probe
<6>[ 2.381861] Bosch Sensortec Device not found retry_chipid = 0
<6>[ 2.382169] i2c_smbus_read_word_data retry_chipid = 0, tempvalue = 8063
<6>[ 2.668391] Bosch Sensortec Device not found retry_chipid = 1
<6>[ 2.668699] i2c_smbus_read_word_data retry_chipid = 1, tempvalue = 8063
<6>[ 2.954909] Bosch Sensortec Device not found retry_chipid = 2
<6>[ 2.955219] i2c_smbus_read_word_data retry_chipid = 2, tempvalue = 8063
<6>[ 3.241456] Bosch Sensortec Device not found retry_chipid = 3
<6>[ 3.241759] i2c_smbus_read_word_data retry_chipid = 3, tempvalue = 8063
<6>[ 3.528893] Bosch Sensortec Device not found retry_chipid = 4
<6>[ 3.529079] i2c_smbus_read_word_data retry_chipid = 4, tempvalue = 8063
<6>[ 3.817149] Bosch Sensortec Device not found retry_chipid = 5
<6>[ 3.817329] i2c_smbus_read_word_data retry_chipid = 5, tempvalue = 8063
<6>[ 3.817631] Bosch Sensortec Device not foundi2c error 8063
<3>[ 4.330169] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.446624] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.795363] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.966901] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.083609] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.432946] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.604953] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.721701] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.071626] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.243809] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.360683] i2c i2c-4: sendbytes: NAK bailout.
<6>[ 6.367518] input: bma2x2 as /devices/virtual/input/input2
<4>[ 6.368141] i2c-core: driver [bma2x2] using legacy suspend method
<4>[ 6.368449] i2c-core: driver [bma2x2] using legacy resume method
<4>[ 6.368679]
<4>[ 6.368686] [I]<6><><bmm_probe><1174>function entrance
<4>[ 6.369134]
<4>[ 6.369139] [I]<6><><bmm_wakeup><193>waking up the chip...
<4>[ 8.401534]
<4>[ 8.401541] [I]<6><><bmm_wakeup><209>wake up result: fail, tried times: 6
<4>[ 8.401999]
<4>[ 8.402004] [E]<3><><bmm_probe><1193>Cannot wake up bmm050, I2C xfer error
<4>[ 8.402474] bmm050: probe of 4-0012 failed with error -5
<6>[ 8.403186] input: proximity as /devices/virtual/input/input3
<6>[ 8.403619] proximity_apds9190 5-0039: enable = 0
<3>[ 8.404439] rt9396bl:rt9396_write: fail to write(reg=0x23,val=0xc)
<6>[ 8.404744] prox_power_set,***********Proximity probe enter when power on*****
<6>[ 8.455571] apds9190_probe,Proximity apds9190_init_client Fail in Probe
<6>[ 8.455876] proximity_apds9190 5-0039: probe error
<6>[ 8.458443] RPC CALL -- TOD TIME UPDATE: ttick = 507498
<6>[ 8.458453] stamp=53795234181578752, freq = 1217159378
<3>[ 8.458959] ../../../../../../kernel/lge/msm7x27a-common/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 8.460618] using rtc device, msm_rtc, for alarms
<6>[ 8.460954] rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0
<6>[ 8.462061] rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1
<6>[ 8.462566] i2c /dev entries driver
<4>[ 8.464779] hi351
<4>[ 8.465009] hi351_sensor_power_up: E 915
<3>[ 8.465308] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en enable
<3>[ 8.466116] rt9396bl:rt9396_write: fail to write(reg=0x31,val=0x4)
<3>[ 8.466416] msm_camera_vreg_config: rt9396_ldo_enable(ldo4) failed
<3>[ 8.467189] rt9396bl:rt9396_write: fail to write(reg=0x25,val=0xb)
<3>[ 8.467491] msm_camera_vreg_config: rt9396_ldo_enable(ldo2) failed
<3>[ 8.468383] rt9396bl:rt9396_write: fail to write(reg=0x29,val=0x1)
<3>[ 8.468563] msm_camera_vreg_config: rt9396_ldo_enable(ldo3) failed
<3>[ 8.524404] MCLK set
<4>[ 8.564411] hi351_sensor_power_up: X 979
<3>[ 8.824426] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x20
<3>[ 8.824729] qup_i2c qup_i2c.0: I2C Status: 132100
<3>[ 8.824906] qup_i2c qup_i2c.0: QUP Status: 0
<3>[ 8.825201] qup_i2c qup_i2c.0: OP Flags: 10
<3>[ 9.084424] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x20
<3>[ 9.084609] qup_i2c qup_i2c.0: I2C Status: 132100
<3>[ 9.084903] qup_i2c qup_i2c.0: QUP Status: 0
<3>[ 9.085076] qup_i2c qup_i2c.0: OP Flags: 10
<3>[ 9.085374] hi351_match_id: hi351: read id failed
<3>[ 9.085549] msm_sensor_i2c_probe hi351_i2c_probe failed
<4>[ 9.085726] hi351_sensor_power_down: E 995
<3>[ 9.164513] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en disable start
<3>[ 9.165431] rt9396bl:rt9396_write: fail to write(reg=0x28,val=0x1)
<3>[ 9.165609] msm_camera_vreg_config: rt9396_ldo_enable(ldo3) OFF failed
<3>[ 9.166501] rt9396bl:rt9396_write: fail to write(reg=0x24,val=0xb)
<3>[ 9.166679] msm_camera_vreg_config: rt9396_ldo_enable(ldo2) OFF failed
<3>[ 9.167571] rt9396bl:rt9396_write: fail to write(reg=0x30,val=0x4)
<3>[ 9.167749] msm_camera_vreg_config: rt9396_ldo_enable(ldo4) OFF failed
<3>[ 9.168049] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en disable end
<4>[ 9.168364] hi351_sensor_power_down: X 1029
<4>[ 9.168554] hi351: probe of 0-0040 failed with error -110
<6>[ 9.170173] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
<6>[ 9.170481] tavarua_radio: tavarua_probe: probe called
<7>[ 9.171161] msm_batt_init: enter
<7>[ 9.173439] msm_batt_enable_filter: enable vbatt filter: OK
<7>[ 9.173463] msm_batt_update_psy_status: enter
<6>[ 9.174184] BATT:FULL Soc
<7>[ 9.174368] msm_batt_update_psy_status: exit
<6>[ 9.174563] msm_batt_init: Charger/Battery = 0x00040001/0x00050001 (RPC version)
<6>[ 9.176108] msm_adc successfully registered
<6>[ 9.176411] msm_adc successfully registered
<6>[ 9.177459] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
<6>[ 9.177958] Bluetooth: HCI UART driver ver 2.2
<6>[ 9.178134] Bluetooth: HCI H4 protocol initialized
<6>[ 9.178428] Bluetooth: HCI_IBS protocol initialized
<6>[ 9.180023] mmc0: SDCC Version: 0x00000000
<3>[ 9.180493] mmc0: No card detect facilities available
<6>[ 9.182466] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0600000 irq 48,0 dma 7 dmacrcri 12
<6>[ 9.182791] mmc0: Controller capabilities: 0x00000001
<6>[ 9.182966] mmc0: 8 bit data mode enabled
<6>[ 9.183256] mmc0: 4 bit data mode disabled
<6>[ 9.183426] mmc0: polling status mode disabled
<6>[ 9.183601] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.183901] mmc0: Slot eject status = 0
<6>[ 9.184069] mmc0: Power save feature enable = 1
<6>[ 9.184366] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x25960000
<6>[ 9.184614] mmc0: DM cmd busaddr 0x25960000, cmdptr busaddr 0x25977f40
<6>[ 9.185541] mmc1: SDCC Version: 0x00000000
<6>[ 9.187714] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 24,296 dma 8 dmacrcri 6
<6>[ 9.188046] mmc1: Controller capabilities: 0x00000001
<6>[ 9.188223] mmc1: 8 bit data mode disabled
<6>[ 9.188514] mmc1: 4 bit data mode enabled
<6>[ 9.188684] mmc1: polling status mode disabled
<6>[ 9.188859] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.189159] mmc1: Slot eject status = 0
<6>[ 9.189328] mmc1: Power save feature enable = 1
<6>[ 9.189623] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x25980000
<6>[ 9.189808] mmc1: DM cmd busaddr 0x25980000, cmdptr busaddr 0x25997f40
<6>[ 9.190719] mmc2: SDCC Version: 0x00000000
<3>[ 9.191116] mmc2: No card detect facilities available
<6>[ 9.192781] mmc2: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 26,0 dma 8 dmacrcri 7
<6>[ 9.192984] mmc2: Controller capabilities: 0x00000001
<6>[ 9.193281] mmc2: 8 bit data mode disabled
<6>[ 9.193601] mmc2: 4 bit data mode enabled
<6>[ 9.193894] mmc2: polling status mode disabled
<6>[ 9.194069] mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.194246] mmc2: Slot eject status = 0
<6>[ 9.194578] mmc2: Power save feature enable = 1
<6>[ 9.194758] mmc2: DM non-cached buffer at ffd40000, dma_addr 0x259a0000
<6>[ 9.195059] mmc2: DM cmd busaddr 0x259a0000, cmdptr busaddr 0x259b7f40
<6>[ 9.195501] LP5521: probe startlp5521_enable
<4>[ 9.195791]
<6>[ 9.196164] lp5521_disable_set
<6>[ 9.198374] lp5521_enable_set
<3>[ 9.219924] lp5521 6-0032: error in resetting chip
<6>[ 9.220233] lp5521_disable_set
<4>[ 9.220428] lp5521: probe of 6-0032 failed with error -5
<4>[ 9.225863] i2c-core: driver [lp5521] using legacy suspend method
<4>[ 9.226046] i2c-core: driver [lp5521] using legacy resume method
<6>[ 9.232328] usbcore: registered new interface driver usbhid
<6>[ 9.237609] usbhid: USB HID core driver
<6>[ 9.243784] ashmem: initialized
<6>[ 9.244194] logger: created 256K log 'log_main'
<6>[ 9.249606] logger: created 256K log 'log_events'
<6>[ 9.250018] logger: created 256K log 'log_radio'
<6>[ 9.255386] logger: created 256K log 'log_system'
<6>[ 9.261643] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
<3>[ 9.267979] msm_soc: ALSA MSM Mixer Setting
<6>[ 9.273719] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
<6>[ 9.278421] __msm_rpc_connect: server not found 30000002:20001
<7>[ 9.278614] msm_snd_rpc_connect failed (compatible VERS = 131073) trying again with another API
<6>[ 9.279091] oprofile: using arm/armv7
<6>[ 9.279531] GACT probability on
<6>[ 9.279716] Mirror/redirect action on
<6>[ 9.279888] Simple TC action Loaded
<6>[ 9.280961] netem: version 1.3
<6>[ 9.281149] u32 classifier
<6>[ 9.281313] Performance counters on
<6>[ 9.281599] input device check on
<6>[ 9.281764] Actions configured
<6>[ 9.281946] Netfilter messages via NETLINK v0.30.
<6>[ 9.282351] nf_conntrack version 0.5.0 (4659 buckets, 18636 max)
<6>[ 9.283494] ctnetlink v0.93: registering with nfnetlink.
<6>[ 9.283868] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 9.284053] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 9.284806] xt_time: kernel timezone is -0000
<6>[ 9.285674] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 9.286281] arp_tables: (C) 2002 David S. Miller
<6>[ 9.286546] TCP: cubic registered
<6>[ 9.286716] Initializing XFRM netlink socket
<6>[ 9.287979] NET: Registered protocol family 10
<6>[ 9.291278] Mobile IPv6
<6>[ 9.291526] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 9.292104] IPv6 over IPv4 tunneling driver
<6>[ 9.294181] NET: Registered protocol family 17
<6>[ 9.294504] NET: Registered protocol family 15
<6>[ 9.295089] Bluetooth: RFCOMM TTY layer initialized
<6>[ 9.295288] Bluetooth: RFCOMM socket layer initialized
<6>[ 9.295654] Bluetooth: RFCOMM ver 1.11
<6>[ 9.295828] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 9.296003] Bluetooth: BNEP filters: protocol
<6>[ 9.296176] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 9.296581] L2TP core driver, V2.0
<6>[ 9.296914] PPPoL2TP kernel driver, V2.0
<6>[ 9.297973] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
<6>[ 9.298469] ThumbEE CPU extension supported.
<6>[ 9.301926] clock_late_init: Removing enables held for handed-off clocks
<3>[ 9.305659] [audio_acdb.c:initialize_rpc] ACDB=> Device Attach failed
<6>[ 9.306091] input: 7k_handset as /devices/virtual/input/input4
<6>[ 9.307826] [BootMode] apps_boot_mode = 0x00000000
<6>[ 9.308694] [FTM] check manual mode [0]
<3>[ 9.308969] lge_get_nv_charging_bypass_boot: msm_proc_comm(PCOM_CUSTOMER_CMD2) failed. cmd(22)
<6>[ 9.309118] All above check routines are passed.
<6>[ 9.309339] [BootMode] boot_mode = unknown
<6>[ 9.309864] input: ats_input as /devices/virtual/input/input5
<6>[ 9.311379] rs30000048 rs30000048.262144: setting system clock to 2012-07-11 17:25:09 UTC (1342027509)
<4>[ 9.311728] Rmt Wait Info Success
<6>[ 9.312121] HSD.fsa8008[lge_hsd_init : 1038]lge_hsd_init
<6>[ 9.312258] HSD.fsa8008[lge_hsd_init : 1041]wake lock init
<6>[ 9.312808] HSD.fsa8008[lge_hsd_probe : 757]lge_hsd_probe
<6>[ 9.313088] HSD.fsa8008[lge_hsd_probe : 850]hi->irq_detect = 297
<6>[ 9.313643] HSD.fsa8008[lge_hsd_probe : 875]hi->irq_key = 285
<6>[ 9.313788] HSD.fsa8008[lge_hsd_probe : 883]initialized irq of gpio_key
<6>[ 9.314021] HSD.fsa8008[lge_hsd_probe : 890]name : h2w state : c03f7a70 : c03f7e08
<6>[ 9.314553] HSD.fsa8008[lge_hsd_probe : 896]request_threaded_irq
<6>[ 9.314969] HSD.fsa8008[lge_hsd_probe : 907]irq_set_irq_wake(hi->irq_key, 1)
<6>[ 9.315323] HSD.fsa8008[lge_hsd_probe : 913]initialize input device
<6>[ 9.315869] input: ffa-keypad as /devices/virtual/input/input6
<6>[ 9.316356] ALSA device list:
<6>[ 9.316493] #0: msm-audio
<6>[ 9.317268] Freeing init memory: 188K
<4>[ 9.322649] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<7>[ 9.323718] msm_batt_update_psy_status: enter
<7>[ 9.324376] BATT: same event count = 1
<6>[ 9.343758] mmc0: new high speed MMC card at address 0001
<4>[ 9.344248] mmc_can_discard : mmc0 disabled
<6>[ 9.344721] mmcblk0: mmc0:0001 HYNIX 3.60 GiB
<6>[ 9.349249] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 >
<3>[ 9.513584] init: cannot open '/initlogo.rle'
<3>[ 9.516688] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<6>[ 9.531874] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1
<6>[ 9.549661] EXT4-fs (mmcblk0p14): re-mounted. Opts: data=ordered,barrier=1
<4>[ 9.565381] init used greatest stack depth: 6028 bytes left
<4>[ 9.668986] e2fsck used greatest stack depth: 5540 bytes left
<3>[ 9.669286] init: exec: pid 102 exited with return code 4: Unknown error: 1024
<6>[ 9.711771] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1
<6>[ 9.732763] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc,errors=continue
<3>[ 9.734829] init: cannot find '/system/bin/rmt_storage', disabling 'rmt_storage'
<4>[ 9.907963] run-parts used greatest stack depth: 5380 bytes left
<4>[ 9.908974] sysinit used greatest stack depth: 5332 bytes left
<3>[ 9.941396] enable_store: android_usb: already disabled
<3>[ 9.941613] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
<3>[ 9.941953] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
<4>[ 9.962129] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[ 9.965781] functions_store: functions_store: request function list: mtp,adb
<3>[ 9.966391] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<6>[ 9.969261] mmc1: new high speed SDHC card at address 1234
<4>[ 9.971121] mmc_can_discard : mmc1 disabled
<6>[ 9.971449] mmcblk1: mmc1:1234 SA04G 3.69 GiB
<6>[ 9.978444] mmcblk1: p1
<6>[ 9.994788] adb_open
<6>[ 9.994956] mtp_bind_config
<6>[ 9.995144] adb_bind_config
<6>[ 10.326401] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[ 10.457591] android_usb gadget: high-speed config #1: android
<6>[ 10.514559] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 10.934524]
<6>[ 10.934536] Charger Type: STD DOWNSTREAM PORT
<4>[ 11.511039] Unsupported request to MDP META IOCTL.
<4>[ 11.534664] ilitek_qvga_disp_on: display on...
<4>[ 11.534684] ilitek_qvga_disp_on: display on...Skip!!!!!! and back light off charger logo mode
<6>[ 11.825173] __msm_rpc_connect: server not found 30000002:20001
<6>[ 11.825656] [snd.c:snd_ioctl] snd_avc_ctl 0
<6>[ 11.828486] [snd.c:snd_ioctl] snd_agc_ctl 0
<6>[ 11.906548] [snd.c:snd_ioctl] snd_set_volume 0 0 7
<6>[ 11.907554] [snd.c:snd_ioctl] snd_set_volume 6 0 7
<6>[ 11.908388] [snd.c:snd_ioctl] snd_set_volume 12 0 7
<6>[ 11.909379] [snd.c:snd_ioctl] snd_set_volume 3 0 7
<6>[ 11.910246] [snd.c:snd_ioctl] snd_set_volume 16 0 7
<6>[ 11.911044] [snd.c:snd_ioctl] snd_set_volume 25 0 7
<6>[ 11.911968] [snd.c:snd_ioctl] snd_set_volume 8 0 1
<6>[ 11.912703] [snd.c:snd_ioctl] snd_set_volume 9 0 1
<6>[ 11.914114] [snd.c:snd_ioctl] snd_set_device 6 1 1
<6>[ 11.915129] [snd.c:snd_ioctl] snd_set_volume 2147483646 0 2
<6>[ 12.094651] ebi2_tovis_power_save: on=0
<4>[ 12.095333] ldo10: Failed to create debugfs directory
<6>[ 12.116198] request_suspend_state: wakeup (3->0) at 12101743335 (2012-07-11 17:25:12.292058335 UTC)
<7>[ 12.326218] msm_batt_update_psy_status: enter
<7>[ 12.326798] msm_batt_update_psy_status: exit
<3>[ 12.930053] init: untracked pid 264 exited
<7>[ 13.271251] msm_batt_update_psy_status: enter
<7>[ 13.273504] msm_batt_update_psy_status: exit
<3>[ 14.984799] gpio_tlmm_config(0x000e4381, GPIO_CFG_DISABLE) <sdc1_clk> failed: 0
<3>[ 14.984979] pin 56 func 1 dir 1 pull 0 drvstr 7
<3>[ 14.985246] gpio_tlmm_config(0x000fc371, GPIO_CFG_DISABLE) <sdc1_cmd> failed: -5
<3>[ 14.985393] pin 55 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.985654] gpio_tlmm_config(0x000fc361, GPIO_CFG_DISABLE) <sdc1_dat_0> failed: -5
<3>[ 14.985801] pin 54 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986059] gpio_tlmm_config(0x000fc351, GPIO_CFG_DISABLE) <sdc1_dat_1> failed: -5
<3>[ 14.986206] pin 53 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986466] gpio_tlmm_config(0x000fc341, GPIO_CFG_DISABLE) <sdc1_dat_2> failed: -5
<3>[ 14.986616] pin 52 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986896] gpio_tlmm_config(0x000fc331, GPIO_CFG_DISABLE) <sdc1_dat_3> failed: -5
<3>[ 14.987136] pin 51 func 1 dir 1 pull 3 drvstr 7
<7>[ 15.392186] msm_batt_update_psy_status: enter
<7>[ 15.392776] msm_batt_update_psy_status: exit
<4>[ 15.821689] Unsupported request to MDP META IOCTL.
<6>[ 15.971654] request_suspend_state: wakeup (0->0) at 15957251668 (2012-07-11 17:25:16.147576668 UTC)
<3>[ 15.973188] init: untracked pid 391 exited
<7>[ 18.255924] msm_batt_update_psy_status: enter
<7>[ 18.257633] msm_batt_update_psy_status: exit
<7>[ 18.338273] msm_batt_update_psy_status: enter
<7>[ 18.339929] msm_batt_update_psy_status: exit
<4>[ 20.845571] Unsupported request to MDP META IOCTL.
<6>[ 20.947123] request_suspend_state: wakeup (0->0) at 20932720002 (2012-07-11 17:25:21.123046668 UTC)
<3>[ 20.949051] init: untracked pid 480 exited
<7>[ 21.343681] msm_batt_update_psy_status: enter
<7>[ 21.345559] BATT: same event count = 1
^C

DeathArrow said:
All drivers are there in the LG E600 kernel, you just have to make a proper config file, compile and boot. You may have to debug using ADB a few times but if you have enough spare time, in few hours, one day at most, you should be able to boot it.
Don't try to boot the kernel with an Android 2.3 or 4.0 image because it won't work. Use CM10 or, better yet, CM10.1.
Click to expand...
Click to collapse
OK, let's make this transparent.
Did You make working Kernel with E600 sources (for working, I mean that Android is booted)?
To answer on that: no.
Why: drivers for E400 touch (and some other things) are not compatible with E600, nor E410, nor anything except E400/E405.
Now when this is clear, can We continue with make it "workable"?
You notice that I say "workable" instead "bootable" as don't need any introduction 'how-to'.... instead of that, was ask (and was asked) if anybody want to work on this. Apreciate Your knowledge, but wasn't see that anyone is interesting on this 'bump-up'.
Anyway, I am not here to discuss about 'how to' make something (there are lot's of forums about help) but to help to someone and get help if needed regarding specific thing, so can We cooperate on project or not?

hecatae said:
Code:
<6>[ 0.293793] ION heap camera_preview created at 26600000 with size 1000000
<6>[ 0.294124] ION heap audio created at 27600000 with size 22e000
<6>[ 0.294333] ION heap sf created at 2782e000 with size 7a0000
<5>[ 0.295201] SCSI subsystem initialized
<6>[ 0.295699] usbcore: registered new interface driver usbfs
<6>[ 0.295979] usbcore: registered new interface driver hub
<6>[ 0.296479] usbcore: registered new device driver usb
<6>[ 0.297118] i2c-gpio i2c-gpio.2: using pins 112 (SDA) and 111 (SCL)
<6>[ 0.297673] i2c-gpio i2c-gpio.3: using pins 10 (SDA) and 9 (SCL)
<6>[ 0.298198] i2c-gpio i2c-gpio.4: using pins 35 (SDA) and 13 (SCL)
<6>[ 0.298759] i2c-gpio i2c-gpio.5: using pins 30 (SDA) and 16 (SCL)
<6>[ 0.299314] i2c-gpio i2c-gpio.6: using pins 80 (SDA) and 77 (SCL)
<6>[ 0.299546] Linux media interface: v0.10
<6>[ 0.299778] Linux video capture interface: v2.00
<6>[ 0.300451] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[ 0.301404] Bluetooth: Core ver 2.16
<6>[ 0.301778] NET: Registered protocol family 31
<6>[ 0.301954] Bluetooth: HCI device and connection manager initialized
<6>[ 0.302261] Bluetooth: HCI socket layer initialized
<6>[ 0.302434] Bluetooth: L2CAP socket layer initialized
<6>[ 0.303024] Bluetooth: SCO socket layer initialized
<6>[ 0.304196] Switching to clocksource dg_timer
<6>[ 0.330859] NET: Registered protocol family 2
<6>[ 0.331598] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.332368] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.333163] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.333748] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.333938] TCP: reno registered
<6>[ 0.334114] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.334531] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.335374] NET: Registered protocol family 1
<6>[ 0.335908] Unpacking initramfs...
<6>[ 0.371669] Freeing initrd memory: 320K
<3>[ 0.376664] Notify: smsm init
<4>[ 0.377214] get_nand_partitions: no flash partition table in shared memory
<6>[ 0.381979] rpcrouter_smd_remote_notify: smd opened 0x (null)
<3>[ 0.385018] rpcrouter: Server create rejected, version = 0, program = 3000003b
<3>[ 0.386558] rpcrouter: Server create rejected, version = 0, program = 30000051
<6>[ 0.398306] [adsp.c:adsp_init] msm_adsp -- 0
<6>[ 0.399738] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.399929] [audpp.c:audpp_probe] Number of concurrency supported 8
<6>[ 0.400233] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.400411] [audpp.c:audpp_probe] queueid:13
<6>[ 0.400581] [audpp.c:audpp_probe] decid:0
<6>[ 0.400749] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.400924] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.401224] [audpp.c:audpp_probe] queueid:14
<6>[ 0.401403] [audpp.c:audpp_probe] decid:1
<6>[ 0.401694] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.401871] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.402048] [audpp.c:audpp_probe] queueid:15
<6>[ 0.402339] [audpp.c:audpp_probe] decid:2
<6>[ 0.402511] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.402804] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.402981] [audpp.c:audpp_probe] queueid:16
<6>[ 0.403153] [audpp.c:audpp_probe] decid:3
<6>[ 0.403443] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.403618] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.403913] [audpp.c:audpp_probe] queueid:17
<6>[ 0.404084] [audpp.c:audpp_probe] decid:4
<6>[ 0.404253] [audpp.c:audpp_probe] nr_codec_support:1
<6>[ 0.405756] __msm_rpc_connect: server not found 30000002:20001
<1>[ 0.407821] dma_test_init, minor number 35
<6>[ 0.408194] lge_panic_handler: got buffer at cf3e000, size 1000
<6>[ 0.408574] rmt_storage_get_ramfs: RAMFS entry: addr = 0x0d0c0000, size = 0x00300000
<6>[ 0.408898] rmt_storage_get_ramfs: RAMFS entry: addr = 0x0cfc0000, size = 0x00100000
<6>[ 0.409426] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
<6>[ 0.414814] rmt_storage_set_client_status Entered
<4>[ 0.415849] diagcmd_probe:lg_fw_diagcmd
<6>[ 0.416374] lge_emmc_direct_access_init: started
<6>[ 0.416668] lge_emmc_direct_access_init: finished
<6>[ 0.616374] fuse init (API version 7.18)
<6>[ 0.617114] msgmni has been set to 582
<4>[ 0.617829] cryptomgr_test used greatest stack depth: 7136 bytes left
<6>[ 0.620109] io scheduler noop registered
<6>[ 0.620363] io scheduler cfq registered (default)
<4>[ 0.620878] rt9396 init start
<6>[ 0.621111] rt9396bl:rt9396_probe: start, client addr=0x54
<7>[ 0.621769] Registered led device: lcd-backlight
<3>[ 0.621786] rt9396bl:rt9396_probe: Registering led class dev successfully.
<7>[ 0.622088] Registered led device: button-backlight
<3>[ 0.622103] rt9396bl:rt9396_probe: Registering led class dev successfully.
<3>[ 0.623034] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x34)
<6>[ 0.623219] rt9396bl:rt9396_set_table: i2c failed addr:131, value:52
<3>[ 0.624116] rt9396bl:rt9396_write: fail to write(reg=0x93,val=0x5)
<6>[ 0.624601] rt9396bl:rt9396_set_table: i2c failed addr:147, value:5
<3>[ 0.625386] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x14)
<4>[ 0.625688] [rt9396_send_intensity] LCD-backlight ON !!!!! val:20
<3>[ 0.625869] rt9396bl:rt9396_probe: done
<6>[ 0.628228] setting pdata->panel_info.fb_num to 3. type: 2
<4>[ 0.628949] ### call the initial lut update routine
<4>[ 0.629133] mdp_lut_init_update_lcdc start ..
<4>[ 0.629426] ### mdp_lut_init_update_lcdc mdp_lut_init_update_lcdc++: mdp_lut_i = 0
<4>[ 0.629619] ### mdp_lut_hw_updae++: mdp_lut_i = 0
<4>[ 0.629793] #### Sign is not Matched#### Cal value R=255 G=255 B=255
<4>[ 0.630303] mdp_lut_init_update_lcdc end.........
<6>[ 0.631391] FrameBuffer[0] 240x320 size=491520 bytes is registered successfully!
<6>[ 0.632286] msm_serial: detected port #0
<6>[ 0.632564] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 9) is a MSM
<6>[ 0.633293] msm_serial: driver initialized
<6>[ 0.634191] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 0.634934] msm_serial_hs module loaded
<6>[ 0.637033] LG_FW : diagchar_open succeed
<7>[ 0.637294] LG_FW : CreateWaitThread, diagchar_read 10004 byte
<7>[ 0.637316] LG_FW : CreateWaitThread, diagchar_read 1004 byte
<7>[ 0.637356] LG_FW : CreateWaitThread, diagchar_read 8004 byte
<6>[ 0.637383] diagchar initialized now
<6>[ 0.637551] MTS_TTY: mtsk_tty_init
<6>[ 0.638034] mtsk_tty_init SUCESS MTS_TTY_REGISTERED
<4>[ 0.640509] dalrpc_rcv_DAL0 used greatest stack depth: 7056 bytes left
<6>[ 0.641459] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[ 0.646673] loop: module loaded
<6>[ 0.647171] lge_tty_atcmd_init: initialize atcmd-ttys
<6>[ 0.647608] lge_kcal_init: finished
<6>[ 0.865471] SCSI Media Changer driver v0.25
<6>[ 0.866386] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.866573] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 0.866994] rmnet_init: SMD devices[8]
<6>[ 0.873634] PPP generic driver version 2.4.2
<4>[ 0.874633] kworker/u:1 used greatest stack depth: 6748 bytes left
<4>[ 0.874941] kworker/u:1 used greatest stack depth: 6652 bytes left
<6>[ 0.875961] PPP MPPE Compression module registered
<6>[ 0.876154] NET: Registered protocol family 24
<7>[ 0.876494] gpio_request: gpio-141 (i2c_host_vbus_en) status -22
<3>[ 0.876511] failed to request 141 GPIO
<6>[ 0.877761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.878114] host driver registered w/ tranceiver
<6>[ 0.878616] usbcore: registered new interface driver usb_ehset_test
<6>[ 0.879364] peripheral driver registered w/ tranceiver
<6>[ 0.880416] mbim_init: initialize 1 instances
<6>[ 0.880738] mbim_init: Initialized 1 ports
<6>[ 0.883354] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 0.883558] android_usb gadget: Number of LUNs=1
<6>[ 0.883858] lun0: LUN: removable file: (no medium)
<6>[ 0.885774] android_set_factory_mode : Using Normal Cable (11)
<6>[ 0.886099] android_usb gadget: android_usb ready
<6>[ 0.887154] input: touch_mcs8000 as /devices/virtual/input/input0
<6>[ 1.104546] msm_hsusb_set_vbus_state USB Connection
<6>[ 1.104861] msm_hsusb_set_vbus_state irq conunt is false
<4>[ 1.176676] Touch PRODUCT = LE0, comp_ver = 0
<6>[ 1.176974] Firmware ver : [0],HW ver : [0]
<6>[ 1.177146] .......MFS_ISC_SINGLE update.........
<4>[ 1.177441] <MELFAS> TOUCH IC REBOOT!!!
<4>[ 1.177634] ldo01: Failed to create debugfs directory
<4>[ 1.284431] ldo01: Failed to create debugfs directory
<4>[ 1.394414] <MELFAS> mass erase start
<4>[ 1.394423]
<6>[ 1.415223] android_set_factory_mode : Using Normal Cable (11)
<6>[ 1.644588] android_work: android_work: did not send uevent (0 0 (null))
<4>[ 1.874409] <MELFAS> TOUCH IC REBOOT!!!
<4>[ 1.874759] ldo01: Failed to create debugfs directory
<4>[ 1.984429] ldo01: Failed to create debugfs directory
<4>[ 2.095278] GPIO Matrix Keypad Driver: Start keypad matrix for vee3_keypad in interrupt mode
<6>[ 2.095903] input: vee3_keypad as /devices/virtual/input/input1
<6>[ 2.096653] bma2x2_probe
<6>[ 2.381861] Bosch Sensortec Device not found retry_chipid = 0
<6>[ 2.382169] i2c_smbus_read_word_data retry_chipid = 0, tempvalue = 8063
<6>[ 2.668391] Bosch Sensortec Device not found retry_chipid = 1
<6>[ 2.668699] i2c_smbus_read_word_data retry_chipid = 1, tempvalue = 8063
<6>[ 2.954909] Bosch Sensortec Device not found retry_chipid = 2
<6>[ 2.955219] i2c_smbus_read_word_data retry_chipid = 2, tempvalue = 8063
<6>[ 3.241456] Bosch Sensortec Device not found retry_chipid = 3
<6>[ 3.241759] i2c_smbus_read_word_data retry_chipid = 3, tempvalue = 8063
<6>[ 3.528893] Bosch Sensortec Device not found retry_chipid = 4
<6>[ 3.529079] i2c_smbus_read_word_data retry_chipid = 4, tempvalue = 8063
<6>[ 3.817149] Bosch Sensortec Device not found retry_chipid = 5
<6>[ 3.817329] i2c_smbus_read_word_data retry_chipid = 5, tempvalue = 8063
<6>[ 3.817631] Bosch Sensortec Device not foundi2c error 8063
<3>[ 4.330169] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.446624] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.795363] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.966901] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.083609] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.432946] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.604953] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.721701] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.071626] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.243809] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.360683] i2c i2c-4: sendbytes: NAK bailout.
<6>[ 6.367518] input: bma2x2 as /devices/virtual/input/input2
<4>[ 6.368141] i2c-core: driver [bma2x2] using legacy suspend method
<4>[ 6.368449] i2c-core: driver [bma2x2] using legacy resume method
<4>[ 6.368679]
<4>[ 6.368686] [I]<6><><bmm_probe><1174>function entrance
<4>[ 6.369134]
<4>[ 6.369139] [I]<6><><bmm_wakeup><193>waking up the chip...
<4>[ 8.401534]
<4>[ 8.401541] [I]<6><><bmm_wakeup><209>wake up result: fail, tried times: 6
<4>[ 8.401999]
<4>[ 8.402004] [E]<3><><bmm_probe><1193>Cannot wake up bmm050, I2C xfer error
<4>[ 8.402474] bmm050: probe of 4-0012 failed with error -5
<6>[ 8.403186] input: proximity as /devices/virtual/input/input3
<6>[ 8.403619] proximity_apds9190 5-0039: enable = 0
<3>[ 8.404439] rt9396bl:rt9396_write: fail to write(reg=0x23,val=0xc)
<6>[ 8.404744] prox_power_set,***********Proximity probe enter when power on*****
<6>[ 8.455571] apds9190_probe,Proximity apds9190_init_client Fail in Probe
<6>[ 8.455876] proximity_apds9190 5-0039: probe error
<6>[ 8.458443] RPC CALL -- TOD TIME UPDATE: ttick = 507498
<6>[ 8.458453] stamp=53795234181578752, freq = 1217159378
<3>[ 8.458959] ../../../../../../kernel/lge/msm7x27a-common/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 8.460618] using rtc device, msm_rtc, for alarms
<6>[ 8.460954] rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0
<6>[ 8.462061] rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1
<6>[ 8.462566] i2c /dev entries driver
<4>[ 8.464779] hi351
<4>[ 8.465009] hi351_sensor_power_up: E 915
<3>[ 8.465308] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en enable
<3>[ 8.466116] rt9396bl:rt9396_write: fail to write(reg=0x31,val=0x4)
<3>[ 8.466416] msm_camera_vreg_config: rt9396_ldo_enable(ldo4) failed
<3>[ 8.467189] rt9396bl:rt9396_write: fail to write(reg=0x25,val=0xb)
<3>[ 8.467491] msm_camera_vreg_config: rt9396_ldo_enable(ldo2) failed
<3>[ 8.468383] rt9396bl:rt9396_write: fail to write(reg=0x29,val=0x1)
<3>[ 8.468563] msm_camera_vreg_config: rt9396_ldo_enable(ldo3) failed
<3>[ 8.524404] MCLK set
<4>[ 8.564411] hi351_sensor_power_up: X 979
<3>[ 8.824426] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x20
<3>[ 8.824729] qup_i2c qup_i2c.0: I2C Status: 132100
<3>[ 8.824906] qup_i2c qup_i2c.0: QUP Status: 0
<3>[ 8.825201] qup_i2c qup_i2c.0: OP Flags: 10
<3>[ 9.084424] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x20
<3>[ 9.084609] qup_i2c qup_i2c.0: I2C Status: 132100
<3>[ 9.084903] qup_i2c qup_i2c.0: QUP Status: 0
<3>[ 9.085076] qup_i2c qup_i2c.0: OP Flags: 10
<3>[ 9.085374] hi351_match_id: hi351: read id failed
<3>[ 9.085549] msm_sensor_i2c_probe hi351_i2c_probe failed
<4>[ 9.085726] hi351_sensor_power_down: E 995
<3>[ 9.164513] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en disable start
<3>[ 9.165431] rt9396bl:rt9396_write: fail to write(reg=0x28,val=0x1)
<3>[ 9.165609] msm_camera_vreg_config: rt9396_ldo_enable(ldo3) OFF failed
<3>[ 9.166501] rt9396bl:rt9396_write: fail to write(reg=0x24,val=0xb)
<3>[ 9.166679] msm_camera_vreg_config: rt9396_ldo_enable(ldo2) OFF failed
<3>[ 9.167571] rt9396bl:rt9396_write: fail to write(reg=0x30,val=0x4)
<3>[ 9.167749] msm_camera_vreg_config: rt9396_ldo_enable(ldo4) OFF failed
<3>[ 9.168049] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en disable end
<4>[ 9.168364] hi351_sensor_power_down: X 1029
<4>[ 9.168554] hi351: probe of 0-0040 failed with error -110
<6>[ 9.170173] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
<6>[ 9.170481] tavarua_radio: tavarua_probe: probe called
<7>[ 9.171161] msm_batt_init: enter
<7>[ 9.173439] msm_batt_enable_filter: enable vbatt filter: OK
<7>[ 9.173463] msm_batt_update_psy_status: enter
<6>[ 9.174184] BATT:FULL Soc
<7>[ 9.174368] msm_batt_update_psy_status: exit
<6>[ 9.174563] msm_batt_init: Charger/Battery = 0x00040001/0x00050001 (RPC version)
<6>[ 9.176108] msm_adc successfully registered
<6>[ 9.176411] msm_adc successfully registered
<6>[ 9.177459] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
<6>[ 9.177958] Bluetooth: HCI UART driver ver 2.2
<6>[ 9.178134] Bluetooth: HCI H4 protocol initialized
<6>[ 9.178428] Bluetooth: HCI_IBS protocol initialized
<6>[ 9.180023] mmc0: SDCC Version: 0x00000000
<3>[ 9.180493] mmc0: No card detect facilities available
<6>[ 9.182466] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0600000 irq 48,0 dma 7 dmacrcri 12
<6>[ 9.182791] mmc0: Controller capabilities: 0x00000001
<6>[ 9.182966] mmc0: 8 bit data mode enabled
<6>[ 9.183256] mmc0: 4 bit data mode disabled
<6>[ 9.183426] mmc0: polling status mode disabled
<6>[ 9.183601] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.183901] mmc0: Slot eject status = 0
<6>[ 9.184069] mmc0: Power save feature enable = 1
<6>[ 9.184366] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x25960000
<6>[ 9.184614] mmc0: DM cmd busaddr 0x25960000, cmdptr busaddr 0x25977f40
<6>[ 9.185541] mmc1: SDCC Version: 0x00000000
<6>[ 9.187714] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 24,296 dma 8 dmacrcri 6
<6>[ 9.188046] mmc1: Controller capabilities: 0x00000001
<6>[ 9.188223] mmc1: 8 bit data mode disabled
<6>[ 9.188514] mmc1: 4 bit data mode enabled
<6>[ 9.188684] mmc1: polling status mode disabled
<6>[ 9.188859] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.189159] mmc1: Slot eject status = 0
<6>[ 9.189328] mmc1: Power save feature enable = 1
<6>[ 9.189623] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x25980000
<6>[ 9.189808] mmc1: DM cmd busaddr 0x25980000, cmdptr busaddr 0x25997f40
<6>[ 9.190719] mmc2: SDCC Version: 0x00000000
<3>[ 9.191116] mmc2: No card detect facilities available
<6>[ 9.192781] mmc2: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 26,0 dma 8 dmacrcri 7
<6>[ 9.192984] mmc2: Controller capabilities: 0x00000001
<6>[ 9.193281] mmc2: 8 bit data mode disabled
<6>[ 9.193601] mmc2: 4 bit data mode enabled
<6>[ 9.193894] mmc2: polling status mode disabled
<6>[ 9.194069] mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.194246] mmc2: Slot eject status = 0
<6>[ 9.194578] mmc2: Power save feature enable = 1
<6>[ 9.194758] mmc2: DM non-cached buffer at ffd40000, dma_addr 0x259a0000
<6>[ 9.195059] mmc2: DM cmd busaddr 0x259a0000, cmdptr busaddr 0x259b7f40
<6>[ 9.195501] LP5521: probe startlp5521_enable
<4>[ 9.195791]
<6>[ 9.196164] lp5521_disable_set
<6>[ 9.198374] lp5521_enable_set
<3>[ 9.219924] lp5521 6-0032: error in resetting chip
<6>[ 9.220233] lp5521_disable_set
<4>[ 9.220428] lp5521: probe of 6-0032 failed with error -5
<4>[ 9.225863] i2c-core: driver [lp5521] using legacy suspend method
<4>[ 9.226046] i2c-core: driver [lp5521] using legacy resume method
<6>[ 9.232328] usbcore: registered new interface driver usbhid
<6>[ 9.237609] usbhid: USB HID core driver
<6>[ 9.243784] ashmem: initialized
<6>[ 9.244194] logger: created 256K log 'log_main'
<6>[ 9.249606] logger: created 256K log 'log_events'
<6>[ 9.250018] logger: created 256K log 'log_radio'
<6>[ 9.255386] logger: created 256K log 'log_system'
<6>[ 9.261643] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
<3>[ 9.267979] msm_soc: ALSA MSM Mixer Setting
<6>[ 9.273719] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
<6>[ 9.278421] __msm_rpc_connect: server not found 30000002:20001
<7>[ 9.278614] msm_snd_rpc_connect failed (compatible VERS = 131073) trying again with another API
<6>[ 9.279091] oprofile: using arm/armv7
<6>[ 9.279531] GACT probability on
<6>[ 9.279716] Mirror/redirect action on
<6>[ 9.279888] Simple TC action Loaded
<6>[ 9.280961] netem: version 1.3
<6>[ 9.281149] u32 classifier
<6>[ 9.281313] Performance counters on
<6>[ 9.281599] input device check on
<6>[ 9.281764] Actions configured
<6>[ 9.281946] Netfilter messages via NETLINK v0.30.
<6>[ 9.282351] nf_conntrack version 0.5.0 (4659 buckets, 18636 max)
<6>[ 9.283494] ctnetlink v0.93: registering with nfnetlink.
<6>[ 9.283868] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 9.284053] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 9.284806] xt_time: kernel timezone is -0000
<6>[ 9.285674] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 9.286281] arp_tables: (C) 2002 David S. Miller
<6>[ 9.286546] TCP: cubic registered
<6>[ 9.286716] Initializing XFRM netlink socket
<6>[ 9.287979] NET: Registered protocol family 10
<6>[ 9.291278] Mobile IPv6
<6>[ 9.291526] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 9.292104] IPv6 over IPv4 tunneling driver
<6>[ 9.294181] NET: Registered protocol family 17
<6>[ 9.294504] NET: Registered protocol family 15
<6>[ 9.295089] Bluetooth: RFCOMM TTY layer initialized
<6>[ 9.295288] Bluetooth: RFCOMM socket layer initialized
<6>[ 9.295654] Bluetooth: RFCOMM ver 1.11
<6>[ 9.295828] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 9.296003] Bluetooth: BNEP filters: protocol
<6>[ 9.296176] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 9.296581] L2TP core driver, V2.0
<6>[ 9.296914] PPPoL2TP kernel driver, V2.0
<6>[ 9.297973] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
<6>[ 9.298469] ThumbEE CPU extension supported.
<6>[ 9.301926] clock_late_init: Removing enables held for handed-off clocks
<3>[ 9.305659] [audio_acdb.c:initialize_rpc] ACDB=> Device Attach failed
<6>[ 9.306091] input: 7k_handset as /devices/virtual/input/input4
<6>[ 9.307826] [BootMode] apps_boot_mode = 0x00000000
<6>[ 9.308694] [FTM] check manual mode [0]
<3>[ 9.308969] lge_get_nv_charging_bypass_boot: msm_proc_comm(PCOM_CUSTOMER_CMD2) failed. cmd(22)
<6>[ 9.309118] All above check routines are passed.
<6>[ 9.309339] [BootMode] boot_mode = unknown
<6>[ 9.309864] input: ats_input as /devices/virtual/input/input5
<6>[ 9.311379] rs30000048 rs30000048.262144: setting system clock to 2012-07-11 17:25:09 UTC (1342027509)
<4>[ 9.311728] Rmt Wait Info Success
<6>[ 9.312121] HSD.fsa8008[lge_hsd_init : 1038]lge_hsd_init
<6>[ 9.312258] HSD.fsa8008[lge_hsd_init : 1041]wake lock init
<6>[ 9.312808] HSD.fsa8008[lge_hsd_probe : 757]lge_hsd_probe
<6>[ 9.313088] HSD.fsa8008[lge_hsd_probe : 850]hi->irq_detect = 297
<6>[ 9.313643] HSD.fsa8008[lge_hsd_probe : 875]hi->irq_key = 285
<6>[ 9.313788] HSD.fsa8008[lge_hsd_probe : 883]initialized irq of gpio_key
<6>[ 9.314021] HSD.fsa8008[lge_hsd_probe : 890]name : h2w state : c03f7a70 : c03f7e08
<6>[ 9.314553] HSD.fsa8008[lge_hsd_probe : 896]request_threaded_irq
<6>[ 9.314969] HSD.fsa8008[lge_hsd_probe : 907]irq_set_irq_wake(hi->irq_key, 1)
<6>[ 9.315323] HSD.fsa8008[lge_hsd_probe : 913]initialize input device
<6>[ 9.315869] input: ffa-keypad as /devices/virtual/input/input6
<6>[ 9.316356] ALSA device list:
<6>[ 9.316493] #0: msm-audio
<6>[ 9.317268] Freeing init memory: 188K
<4>[ 9.322649] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<7>[ 9.323718] msm_batt_update_psy_status: enter
<7>[ 9.324376] BATT: same event count = 1
<6>[ 9.343758] mmc0: new high speed MMC card at address 0001
<4>[ 9.344248] mmc_can_discard : mmc0 disabled
<6>[ 9.344721] mmcblk0: mmc0:0001 HYNIX 3.60 GiB
<6>[ 9.349249] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 >
<3>[ 9.513584] init: cannot open '/initlogo.rle'
<3>[ 9.516688] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<6>[ 9.531874] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1
<6>[ 9.549661] EXT4-fs (mmcblk0p14): re-mounted. Opts: data=ordered,barrier=1
<4>[ 9.565381] init used greatest stack depth: 6028 bytes left
<4>[ 9.668986] e2fsck used greatest stack depth: 5540 bytes left
<3>[ 9.669286] init: exec: pid 102 exited with return code 4: Unknown error: 1024
<6>[ 9.711771] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1
<6>[ 9.732763] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc,errors=continue
<3>[ 9.734829] init: cannot find '/system/bin/rmt_storage', disabling 'rmt_storage'
<4>[ 9.907963] run-parts used greatest stack depth: 5380 bytes left
<4>[ 9.908974] sysinit used greatest stack depth: 5332 bytes left
<3>[ 9.941396] enable_store: android_usb: already disabled
<3>[ 9.941613] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
<3>[ 9.941953] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
<4>[ 9.962129] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[ 9.965781] functions_store: functions_store: request function list: mtp,adb
<3>[ 9.966391] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<6>[ 9.969261] mmc1: new high speed SDHC card at address 1234
<4>[ 9.971121] mmc_can_discard : mmc1 disabled
<6>[ 9.971449] mmcblk1: mmc1:1234 SA04G 3.69 GiB
<6>[ 9.978444] mmcblk1: p1
<6>[ 9.994788] adb_open
<6>[ 9.994956] mtp_bind_config
<6>[ 9.995144] adb_bind_config
<6>[ 10.326401] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[ 10.457591] android_usb gadget: high-speed config #1: android
<6>[ 10.514559] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 10.934524]
<6>[ 10.934536] Charger Type: STD DOWNSTREAM PORT
<4>[ 11.511039] Unsupported request to MDP META IOCTL.
<4>[ 11.534664] ilitek_qvga_disp_on: display on...
<4>[ 11.534684] ilitek_qvga_disp_on: display on...Skip!!!!!! and back light off charger logo mode
<6>[ 11.825173] __msm_rpc_connect: server not found 30000002:20001
<6>[ 11.825656] [snd.c:snd_ioctl] snd_avc_ctl 0
<6>[ 11.828486] [snd.c:snd_ioctl] snd_agc_ctl 0
<6>[ 11.906548] [snd.c:snd_ioctl] snd_set_volume 0 0 7
<6>[ 11.907554] [snd.c:snd_ioctl] snd_set_volume 6 0 7
<6>[ 11.908388] [snd.c:snd_ioctl] snd_set_volume 12 0 7
<6>[ 11.909379] [snd.c:snd_ioctl] snd_set_volume 3 0 7
<6>[ 11.910246] [snd.c:snd_ioctl] snd_set_volume 16 0 7
<6>[ 11.911044] [snd.c:snd_ioctl] snd_set_volume 25 0 7
<6>[ 11.911968] [snd.c:snd_ioctl] snd_set_volume 8 0 1
<6>[ 11.912703] [snd.c:snd_ioctl] snd_set_volume 9 0 1
<6>[ 11.914114] [snd.c:snd_ioctl] snd_set_device 6 1 1
<6>[ 11.915129] [snd.c:snd_ioctl] snd_set_volume 2147483646 0 2
<6>[ 12.094651] ebi2_tovis_power_save: on=0
<4>[ 12.095333] ldo10: Failed to create debugfs directory
<6>[ 12.116198] request_suspend_state: wakeup (3->0) at 12101743335 (2012-07-11 17:25:12.292058335 UTC)
<7>[ 12.326218] msm_batt_update_psy_status: enter
<7>[ 12.326798] msm_batt_update_psy_status: exit
<3>[ 12.930053] init: untracked pid 264 exited
<7>[ 13.271251] msm_batt_update_psy_status: enter
<7>[ 13.273504] msm_batt_update_psy_status: exit
<3>[ 14.984799] gpio_tlmm_config(0x000e4381, GPIO_CFG_DISABLE) <sdc1_clk> failed: 0
<3>[ 14.984979] pin 56 func 1 dir 1 pull 0 drvstr 7
<3>[ 14.985246] gpio_tlmm_config(0x000fc371, GPIO_CFG_DISABLE) <sdc1_cmd> failed: -5
<3>[ 14.985393] pin 55 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.985654] gpio_tlmm_config(0x000fc361, GPIO_CFG_DISABLE) <sdc1_dat_0> failed: -5
<3>[ 14.985801] pin 54 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986059] gpio_tlmm_config(0x000fc351, GPIO_CFG_DISABLE) <sdc1_dat_1> failed: -5
<3>[ 14.986206] pin 53 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986466] gpio_tlmm_config(0x000fc341, GPIO_CFG_DISABLE) <sdc1_dat_2> failed: -5
<3>[ 14.986616] pin 52 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986896] gpio_tlmm_config(0x000fc331, GPIO_CFG_DISABLE) <sdc1_dat_3> failed: -5
<3>[ 14.987136] pin 51 func 1 dir 1 pull 3 drvstr 7
<7>[ 15.392186] msm_batt_update_psy_status: enter
<7>[ 15.392776] msm_batt_update_psy_status: exit
<4>[ 15.821689] Unsupported request to MDP META IOCTL.
<6>[ 15.971654] request_suspend_state: wakeup (0->0) at 15957251668 (2012-07-11 17:25:16.147576668 UTC)
<3>[ 15.973188] init: untracked pid 391 exited
<7>[ 18.255924] msm_batt_update_psy_status: enter
<7>[ 18.257633] msm_batt_update_psy_status: exit
<7>[ 18.338273] msm_batt_update_psy_status: enter
<7>[ 18.339929] msm_batt_update_psy_status: exit
<4>[ 20.845571] Unsupported request to MDP META IOCTL.
<6>[ 20.947123] request_suspend_state: wakeup (0->0) at 20932720002 (2012-07-11 17:25:21.123046668 UTC)
<3>[ 20.949051] init: untracked pid 480 exited
<7>[ 21.343681] msm_batt_update_psy_status: enter
<7>[ 21.345559] BATT: same event count = 1
^C
Click to expand...
Click to collapse
And?
rt9396bl is not present in device
Firmware ver : [0],HW ver : [0] - touch driver is wrong
ldo01: Failed to create debugfs directory - ldo01 is responsed to give power to touch... failed
Bosch Sensortec Device not found retry_chipid = 0 - wrong pin's, i2c and so on
hi351: probe of 0-0040 failed with error -110 - wrong pin's
lp5521: probe of 6-0032 failed with error -5 - not present in device
So, as I say, vee3 or M4 or U7 or V1 or whatever of Kernel configurations will NOT WORK with E400 device!!!
Why anyone want to make totally other hardware to work with something what not pass in it?
Guys, please, first check-out hardware in device and after that give suggestions....
PS, I was see somewhere here that one is get Kernel working.... (sure, 3.4) so, wondering where is that Kernel where was wrotten here "in a big mouths" and also was link to it for download? OP was ill, ok, but where is working Kernel?
I was find only 'try's' for it but noone work... it boot but, nobody was fix touch driver.
Is anyone try that famous 3.4 what was work on L3? If yes, please send (or attach) me an link so I can try it.
Thank You.

fergy said:
And?
rt9396bl is not present in device
Firmware ver : [0],HW ver : [0] - touch driver is wrong
ldo01: Failed to create debugfs directory - ldo01 is responsed to give power to touch... failed
Bosch Sensortec Device not found retry_chipid = 0 - wrong pin's, i2c and so on
hi351: probe of 0-0040 failed with error -110 - wrong pin's
lp5521: probe of 6-0032 failed with error -5 - not present in device
So, as I say, vee3 or M4 or U7 or V1 or whatever of Kernel configurations will NOT WORK with E400 device!!!
Why anyone want to make totally other hardware to work with something what not pass in it?
Guys, please, first check-out hardware in device and after that give suggestions....
PS, I was see somewhere here that one is get Kernel working.... (sure, 3.4) so, wondering where is that Kernel where was wrotten here "in a big mouths" and also was link to it for download? OP was ill, ok, but where is working Kernel?
I was find only 'try's' for it but noone work... it boot but, nobody was fix touch driver.
Is anyone try that famous 3.4 what was work on L3? If yes, please send (or attach) me an link so I can try it.
Thank You.
Click to expand...
Click to collapse
hi fergy,
do you want a source, or a kernel, or a boot.img or?

[Q] External keyboard/OTG problem

When i plug in the OTG cable plus the Logitech-wireless-tingy the G Pad just tells me that they are a keyboard and a mouse connected but i can't use it to write or use the mouse.
Do I need to download any apps or are my keyboard just not compatible with my G Pad?
Keyboard: Logitech K400r
When i do the same on my GNex it just works and a small cursor shows up on the screen and i'm ready to write.

Herr_Berg said:
When i plug in the OTG cable plus the Logitech-wireless-tingy the G Pad just tells me that they are a keyboard and a mouse connected but i can't use it to write or use the mouse.
Do I need to download any apps or are my keyboard just not compatible with my G Pad?
Keyboard: Logitech K400r
When i do the same on my GNex it just works and a small cursor shows up on the screen and i'm ready to write.
Click to expand...
Click to collapse
I use a Logitech wireless mouse with mine and it works fine. I just plug the dongle into the OTG cable. I don't use this with a keyboard, because the keyboard I have uses Bluetooth. I can't think of any reason that your setup isn't working. Can you plug some kind of storage device into the OTG cable and does it appear? I would try different devices to make sure that the cable is good, etc. Try it with the mouse alone, first and see if you can get that to work.

Herr_Berg said:
When i plug in the OTG cable plus the Logitech-wireless-tingy the G Pad just tells me that they are a keyboard and a mouse connected but i can't use it to write or use the mouse.
Do I need to download any apps or are my keyboard just not compatible with my G Pad?
Keyboard: Logitech K400r
When i do the same on my GNex it just works and a small cursor shows up on the screen and i'm ready to write.
Click to expand...
Click to collapse
Play with it a little, e.g.,
1. Unplug and plug in back several times.
2. Unplug, clear cache, turn off the tablet, plug in and turn the tablet on.
3. Be devious.

mackeev said:
Play with it a little, e.g.,
1. Unplug and plug in back several times.
2. Unplug, clear cache, turn off the tablet, plug in and turn the tablet on.
3. Be devious.
Click to expand...
Click to collapse
Good advice!

mackeev said:
Play with it a little, e.g.,
1. Unplug and plug in back several times.
2. Unplug, clear cache, turn off the tablet, plug in and turn the tablet on.
3. Be devious.
Click to expand...
Click to collapse
Will try that, hope its works. Thanks!

woody1 said:
I use a Logitech wireless mouse with mine and it works fine. I just plug the dongle into the OTG cable. I don't use this with a keyboard, because the keyboard I have uses Bluetooth. I can't think of any reason that your setup isn't working. Can you plug some kind of storage device into the OTG cable and does it appear? I would try different devices to make sure that the cable is good, etc. Try it with the mouse alone, first and see if you can get that to work.
Click to expand...
Click to collapse
It's a combined keyboard/touchpad. Yes the cable works with anything else, cameras, storage ect.

Same problem here!
I just got a usb otg cable and my Logitech k400r does not work with my LG G Pad either

I'm having the same issue on my G Pad with the Logitech K400r pad\keyboard. I tried the same cable and dongle on my LG G2 and it worked just fine. Anyone get it to work on the G Pad?
Ran DMESG and saw this
<6>[ 4926.086242 / 03-05 01:59:11.347] msm_otg msm_otg: phy_reset: success
<6>[ 4926.192260 / 03-05 01:59:11.457] msm_otg_reset: pm usb id pull_up(0)
<6>[ 4926.196014 / 03-05 01:59:11.457] msm_otg msm_otg: USB in low power mode
<6>[ 4926.700622 / 03-05 01:59:11.958] msm_pmic_id_irq: INTERRUPT !
<6>[ 4926.701049 / 03-05 01:59:11.958] anx7808_cbl_det_isr : detect cable removal
<6>[ 4926.892120 / 03-05 01:59:12.158] msm_pmic_id_w: INTERRUPT !
<6>[ 4926.892547 / 03-05 01:59:12.158] msm_pmic_id_w: ID clear - otg cable is inserted
<6>[ 4926.906280 / 03-05 01:59:12.168] msm_otg msm_otg: USB exited from low power mode
<6>[ 4926.906677 / 03-05 01:59:12.168] otg_gender_is_connected: check if an otg gender is connected.
<6>[ 4926.907073 / 03-05 01:59:12.168] regulator_disable (ext_mpp8) success ! USB_ID -> DEVICE_ID
<6>[ 4926.909332 / 03-05 01:59:12.168] regulator_enable (ext_mpp8) success ! USB_ID -> HOST_ID
<6>[ 4926.909698 / 03-05 01:59:12.168] adc value: 695
<6>[ 4926.909881 / 03-05 01:59:12.168] otg gender is connected
<6>[ 4927.022552 / 03-05 01:59:12.288] msm_hsusb_host msm_hsusb_host: Qualcomm On-Chip EHCI Host Controller
<6>[ 4927.022888 / 03-05 01:59:12.288] msm_hsusb_host msm_hsusb_host: new USB bus registered, assigned bus number 1
<6>[ 4927.052124 / 03-05 01:59:12.318] msm_hsusb_host msm_hsusb_host: irq 132, io mem 0x12500000
<6>[ 4927.072204 / 03-05 01:59:12.338] msm_hsusb_host msm_hsusb_host: USB 2.0 started, EHCI 1.00
<6>[ 4927.072570 / 03-05 01:59:12.338] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 4927.072753 / 03-05 01:59:12.338] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 4927.072906 / 03-05 01:59:12.338] usb usb1: Product: Qualcomm On-Chip EHCI Host Controller
<6>[ 4927.073028 / 03-05 01:59:12.338] usb usb1: Manufacturer: Linux 3.4.0 ehci_hcd
<6>[ 4927.073211 / 03-05 01:59:12.338] usb usb1: SerialNumber: msm_hsusb_host
<6>[ 4927.074707 / 03-05 01:59:12.338] hub 1-0:1.0: USB hub found
<6>[ 4927.074829 / 03-05 01:59:12.338] hub 1-0:1.0: 1 port detected
<6>[ 4927.392547 / 03-05 01:59:12.659] usb 1-1: new full-speed USB device number 2 using msm_hsusb_host
<3>[ 4927.555969 / 03-05 01:59:12.819] usb 1-1: device v046d pc52b is not supported
<6>[ 4927.556213 / 03-05 01:59:12.819] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
<6>[ 4927.556579 / 03-05 01:59:12.819] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[ 4927.556945 / 03-05 01:59:12.819] usb 1-1: Product: USB Receiver
<6>[ 4927.557159 / 03-05 01:59:12.819] usb 1-1: Manufacturer: Logitech
<6>[ 4942.675323 / 03-05 01:59:27.943] msm_pmic_id_irq: INTERRUPT !
<6>[ 4942.675903 / 03-05 01:59:27.943] anx7808_cbl_det_isr : detect cable removal
<6>[ 4942.676422 / 03-05 01:59:27.943] usb 1-1: USB disconnect, device number 2
<6>[ 4942.872436 / 03-05 01:59:28.144] msm_pmic_id_w: INTERRUPT !
<6>[ 4942.872589 / 03-05 01:59:28.144] otg_cable is removed

Ok, so I got this working. Soon I'll be releasing a new kernel with support for all Logitech Unifying Receivers. :good:

id10terror said:
Ok, so I got this working. Soon I'll be releasing a new kernel with support for all Logitech Unifying Receivers. :good:
Click to expand...
Click to collapse
Oh wow Haha, what a coincidence. Just got my OTG cable in the mail and tried plugging in the k400r, and was sad when it didn't work. Looking forward to your kernel maybe also other developers will use your fix

Ajsh said:
Oh wow Haha, what a coincidence. Just got my OTG cable in the mail and tried plugging in the k400r, and was sad when it didn't work. Looking forward to your kernel maybe also other developers will use your fix
Click to expand...
Click to collapse
My new kernel which includes support for Logitech Unifying receivers is now available here:
http://forum.xda-developers.com/showthread.php?t=2684085

id10terror said:
My new kernel which includes support for Logitech Unifying receivers is now available here:
http://forum.xda-developers.com/showthread.php?t=2684085
Click to expand...
Click to collapse
This is really cool! I don't know if they work out of the box on the V510, but if not, I would like to incorporate your fix into the sleekai kernel as well. Good job!

sleekmason said:
This is really cool! I don't know if they work out of the box on the V510, but if not, I would like to incorporate your fix into the sleekai kernel as well. Good job!
Click to expand...
Click to collapse
I'll PM later this evening you what I enabled in the kernel build.. It's really simple, it was just the research and debugging that took me a bit to figure it all out. But it's working

When I try use my external HD, doesn't work. Looking dmesg log I found this:
<6>[ 1618.034393 / 03-25 08:36:36.152] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host
<3>[ 1618.279632 / 03-25 08:36:36.393] usb 1-1: device descriptor read/all, error -71
<6>[ 1618.394378 / 03-25 08:36:36.513] usb 1-1: new high-speed USB device number 3 using msm_hsusb_host
<3>[ 1618.545715 / 03-25 08:36:36.663] usb 1-1: device v1058 p0748 is not supported
<6>[ 1618.545806 / 03-25 08:36:36.663] usb 1-1: New USB device found, idVendor=1058, idProduct=0748
<6>[ 1618.545898 / 03-25 08:36:36.663] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
<6>[ 1618.546020 / 03-25 08:36:36.663] usb 1-1: Product: My Passport 0748
<6>[ 1618.546112 / 03-25 08:36:36.663] usb 1-1: Manufacturer: Western Digital
<6>[ 1618.546173 / 03-25 08:36:36.663] usb 1-1: SerialNumber: 57583531453433434C464438
<6>[ 1618.547454 / 03-25 08:36:36.663] scsi12 : usb-storage 1-1:1.0
<6>[ 1618.580017 / 03-25 08:36:36.693] usb 1-1: USB disconnect, device number 3
<3>[ 1618.834503 / 03-25 08:36:36.953] hub 1-0:1.0: unable to enumerate USB device on port 1
Is possible fix it with a custon kernel?

how do you install a custom kernel on the G Pad?

fsdigital12 said:
how do you install a custom kernel on the G Pad?
Click to expand...
Click to collapse
Do yo have root? Have you installed a custom recovery like tarp?
Reboot into recovery and install. Make a backup of boot first.

hi there. trying to run my logitech t650 on my g pad ii and it isn't working. any ideas?