Develop Bugs

[MEGA]Titanium S1,Cherry Flame2.0,KTouch U86 Kiss,Archos 45 Platinum

Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss , I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
NOTE:- Archos 45 Platinum too has similar device specifications.The same CWM version worked for @best98 who is using an Archos 45 Platinum.
Tip:Using CWM touch recovery
When using the CWM Touch recovery you may notice that it is not really working properly and that touch is not doing anything. The fact is the touch is being registered and that the touch method is different than normal android because of limited drivers in recovery.
The working
Use one finger touch to scroll
Use two finger touch to select item
Installing a Recovery Menu
Using PC
1) Install the Mobile Drivers.
2) Download Minimal ADB And fastboot [Windows users] Linux and Mac users might have to download the whole Android sdk as of now.
3) Download the recovery you want from the attachments below.
4) Rename them to recovery.img after extracting and copy it to a folder of know location.
5) Boot your device into fastboot mode.i.e Power on your mobile by pressing and holding Power button and vol+ Key.until you see A green screen.
6) Connect your device to the PC and open Minimal ADB and fastboot
7) Run the command " fastboot flash recovery C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG".
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
8) Wait untill it completes and VOILA new recovery installed.
Note: In case you want to preserve your stock recovery, run the command "fastboot boot C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG"
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
Using Mobile
Simple Method.
Just install the TACK Manager from here and install the recovery .Enjoy .
Not so simple method
Download the flashable recoveries from Below and flash it through CWM Or TWRP [Yes, you need custom recovery for this to flash]
Click to expand...
Click to collapse
Rooting Your Device
Method 1: Through CWM/TWRP
1) Download the SuperSU package provided below.
2) Copy it to the root of your SDCard
3) Select Install zip from SDCard
Method 2:Through Framaroot
Personally I Did not get any success by this method.But lot of users reported it to to work by using the Gandalf exploit.
Also some versions of framaroot work better on some devices as compared to others.So maybe just have to check which version works for our Mobile.
1) Download and install Framaroot.apk
2) On the exploits list select Gandalf
3) It'll probably crash the first time and apparently work the second time you launch it.
As I Am not sure which version of framaroot works for this mobile hence no upload
Click to expand...
Click to collapse

Reserved
Flashing Roms and Fix Soft brick
1) Copy Rom to SDCard
2) Boot into Recovery by Powering on while holding power and vol+ Button.Initially you'll see a green screen...Keep holding untill the screen turns red.
3) Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
4) Goto Advanced and format Dalvik Cache
5) Select Apply Zip from SD Card
6) Select zip file of rom to install and wait.
7) Reboot and voila.
Note:This is assuming you are using CWMR
Note: Do not format /SYS_BOOT Partition.You'll end up bricking your device and then will not be able to boot into Fastboot mode.
If this happens by mistake.Follow the next Guide.
Click to expand...
Click to collapse
Fixing RESET FOR ENTRY QPST DOWNLOAD
In case you end up Formatting /SYS_BOOT Partition then you'll most likely end up in this.There might be few other cases when this can happen but none that i am aware of.
If you Have a Linux Desktop
If you have access to Linux PC then connect your mobile to it and mount the partition which is around 50 MB. Download the Images.zip from below.unzip the file and copy the whole folder to the 50 MB partition.
Your File structure should look something like this
-\50MBPartition
-\image
-\AMSS.MBN
-\AMSSHD.MBN​
If you have Windows
http://www.filefactory.com/file/2n5ygdzybijv
I'll soon put up a guide for windows users.
This is the guide I found on facebook's CM Flame 2.0 group.
DISCLAIMER:
This fix worked for me. I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE, YOU DO THIS AT YOUR OWN RISK!!! Please do the process step-by-step. DON'T SKIP any step as I don't know what will happen and there's a possibilty that your phone will be dead permanently.
TOOLS NEEDED:
Roadkill and StockROM
DOWNLOAD STEPS:
1. Go to www.dropbox.com
2. SIGN-IN using MY credentials
E-mail: [email protected]
Password: dropbox-pemaustria
3. Navigate to the folder cmflame2, there you can find the file.
4. Right click cmflame2stock.zipx, and click download.
(THIS STEPS LEAVE ME NO CHOICE BUT TO GIVE MY DROPBOX ACCOUNT TO YOU. AS A RESPECT, PLEASE DO NOT CHANGE ANY ACCOUNTS AND SECURITY SETTINGS ON MY PROFILE. THANK YOU)
NOTE: Please use WinZip for extracting files. Thanks
TUTORIALS:
1. Disconnect all USB drives especially flash drives, including memory cards.
2. Turn on your device to QPST Mode, and connect it to computer. When a window prompt you to format card. CANCEL.
3. Extract the contents of cmflame2stock.zipx and run Roadkill.exe. Click 'Yes' if administrative privilages prompt you.
4. In the left side of 'Write image to' choose PHYSICAL DISK 1(3.61GB). In my case it is 3.61 GB. Your size must be approximately 4GB. CHOOSE THE RIGHT DISK. CHOOSING THE WRONG DISK WILL RESULT DAMAGE to the selected disk.
5. In your extracted folder, you will see an image file named CM-Flame2.0-StockROM.img.
6. On source file, browse for the image file you just extracted.
7. Click 'START', wait for the process until it's finished.
Click to expand...
Click to collapse

Custom ROM's
Stock Rom
Karbonn Titanium S1
Flashable ZIP
CWM Backup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cherry Mobile Flame 2.0
Flashable ZIP
K-Touch Hornet U86 Kiss
K-Touch 1.3.4 Rom
Archos 45 Platinum
Archos 45 CWM Backup
Click to expand...
Click to collapse
Custom ROMS
LeWa OS 14.05.16
Download
One of the most stable ROMs I've seen for our device.It is Continiuosly developed and supported at Lewatek and has weekly updates at friday.OTA update are available so you don't have to download the whole ROM
MIUI ROM 4.1.17
Highly Customizable ROM.
MIUI Is known for the amount of customization you can do with it.From Statusbar to Lockscreen to everything normal android OS can do.
MIUI ROM Download
Lenovo Magic 4.0
With Support for over 11 Languages and
Download
CM10.1
CM10.1 Base ROM
Update File
CM10.2 Alpha
CM10.2 ROM
CM11 Alpha 3
CM11 ROM
Nokia X ROM Port
This ROM is ported by our friend rdis.
You can find the ROM here
AOSP KitkatFlare
More like Stock ROM with KitKat touch in it.Cooler and more Powerful
This is a KitKat Look alike and not the actual kitkat. For KitKat Check CM11 Above.
AOSP KitKatFlare
IXYNOS
Based on stock
Fully themed with color combination of cyan, yellow, purple and white
Slim rom around 189 Mb
init.d tweaks
build.prop tweaks
ttpod
mifileexplorer
pre rooted
zipaligned
net speed in status bar
good battery life
extremely smooth high performance rom
camera with smile detection
Ixynos ROM
Xperia Z
Xperia Z Download
Click to expand...
Click to collapse

Reserved
Reserved

Thanks idrogon81
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.

sunilneelam said:
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.
Click to expand...
Click to collapse
That's strange :/
Didnt work for me

Any Cynogenmod roms
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated

LOLya said:
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated
Click to expand...
Click to collapse
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1

TY
idragon81 said:
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1
Click to expand...
Click to collapse
If uget it bugfree plz upload it
Thanks

English TWRP
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it

Hi,
Great to read that.. at least after crawling the web and finding that Karbon S5 is equivalent to Archos 50 Platinum.. I find from the specs that this Karbonn S1 is the same as the Archos 45 Platinum that I own.
Specs are : here for the Archos 45..
http://www.archos.com/gb/products/smartphones/platinum/archos_45platinum/specs.html?#a
Finally.. I can't wait to see Cyanogen on it.. maybe a chance to have a CM11 ?
Regards

at last i could successfully port android 4.2.2 to karbonn titanium s1...
the rom is being uploaded...its named as "CHEEKUMOD" as it is edited by me
whats working:
ALMOST EVERYTHING :fingers-crossed:
whats NOT working:
CAMERA FOCUS
REST ALL ITS JUST FINE AND AWESOME !!
see the screen shots mean while

Karbonn Titanium S1 custom rom
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
========================================================================================================
Whats WORKING:
VERSION 1
ALMOST EVERYTHING
VERSION 2
ALMOST EVERYTHING
========================================================================================================
Whats NOT WORKING:
VERSION 1
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
VERSION 2
CAMERA FOCUS
Will give the fix soon,or someone please help me out to fix it...
========================================================================================================
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
VERSION 1:
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
========================================================================================================
DOWNLOAD THE VERSION 2 OF MY ROM HERE WITH MIC FIX AND GAPPS !!
IMPORTANT !!!!!!!!!!!!!!!!!!!!!!! <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
DO NOT FLASH GAPPS WITH THIS VERSION OF MY ROM IT IS PRE INSTALLED IN THE ROM...!!
VERSION 2:
ROM DOWNLOAD: https://drive.google.com/file/d/0Bz2-ARVuWcM9SUVkUnJSSnV3WEU/edit?usp=sharing
GAPPS DOWNLOAD: ITS PRE INSTALLED IN THE ROM DO NOT FLASH AGAIN !! < < < < < < < < < < < < < < < < <---------------------NOTE
Changelog:
1:Fixed "Mic not working in call".
2:have added gapps in the rom file to minimize flashing procedure of flashing each at a time.
========================================================================================================
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!

pls..
idragon81 said:
Flashing Roms and Fix Soft brick
Fixing RESET FOR ENTRY QPST DOWNLOAD
Click to expand...
Click to collapse
Pls.. post a guide for windows users.thanks

CWM is the solution
claymisteryo said:
Pls.. post a guide for windows users.thanks
Click to expand...
Click to collapse
Its not necessary to flash or reset the soft brick using any OS,
U can do it by CWM also.
1]For softbrick u can just factory reset and wipe cache
2] for flashing u can mount and remount sdcard and copy the .zip file to it and choose install zip from sdcard

Plz accept my request
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Click to expand...
Click to collapse
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it

LOLya said:
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it
Click to expand...
Click to collapse
me too not able to download

Mincrophone not working!!
when you call, the other person cannot hear your voice.... plz fix this!
its quite a major BUG!

Original Site
chetan007cheeku said:
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
Whats WORKING:
ALMOST EVERYTHING
Whats NOT WORKING:
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
Will give the fix soon,or someone please help me out to fix it...
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!
Click to expand...
Click to collapse
Actually Cheetan this is the site with the same ROM,no offence.You might have modified much in this ROM(Your ROM(Cheeku ROM))
Site: http://www.needrom.com/mobile/k-touch-u86-7
Problem is u just need to make account

LOLya said:
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it
Click to expand...
Click to collapse
can i use any twrp version instead?

All About Rooting And Tweaking.

This thread will hold all questions about Rooting of Canvas 4.
Required Softwares that any canvas4 owner should have
canvas4 drivers- Download
new drivers32 bit - Download
64 bit-Download
flash tools - https://www.dropbox.com/s/8rlvzjcovxo7fgl/SP_Flash_Tool_v3.1304.0.zip"]Download[/URL]
new drivers32 bit -Download
64 bit- Download
Motochopper -
link 1 - Motochopper Root Tool
link2 Alternate Link
supersu.zip - Click here
CWM RECOVERY(SP tools flashable)- Click here
RECOVERY(Mobile Uncle Image)-extract the cwm sp flash recovery and use same recovery.img
CANVAS4 stock recovery- Click Here
----------------------------------------------------------------------------------------------------------------------
TUTORIALS **installing xposed frameworks and gravitybox
All About Xposed
Rooting Canvas 4 A210 : (By V.K.A)
A Simple Youtube Video
----------------------------------------------------------------------------------------------------------------
Installing CWM recovery
THROUGH SP FLASH TOOLS
Install the canvas4 drivers
Download and install SP flash tools to your PC also download and extract the Flashable CWM
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted CWM
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
THROUGH MOBILE UNCLE TOOLS(requires root...chk rooting procedure below)
download mobile uncle CWM..extract it and transfer RECOVERY.img to your phone's sd card
download mobile uncle toolkit from playstore and open it
select "update recovery" option and select the recovery.img file in your SD card
restart phone and done!
Rooting Canvas4
USING EXPLOIT:
using an exploit means using an available loophole in the firmware to root...this is done automatically by softwares like MOTOCHOPPER and FRAMAROOT
MOTOCHOPPER
Download MOTOCHOPPER and extract it to a folder in your PC
connect your phone to PC via USB cable
open the folder containing motochopper and start run.bat
a command prompt window will open...just follow onscreen steps
your mobile will reboot in some time....and DONE!!
FRAMAROOT(easiest method to root)
download framaroot app from the xda link given above
install framaroot and start the app
follow onscreen instructions
reboot phone done!NOTE: ROOTING WORKS WITH FRAMAROOT VERSION 1.5 and abv
WITHOUT USING EXPLOIT: this method doesnt use a loophole but forces the root on your device...which means this method is always successful...however you need CWM installed for this method...which can be easily installed using SP flash tools(see above)
FLASHING SUPERSU
install CWM by using the method of SP flash tool
download supersu.zip from above links transfer it to your SD card
boot into recovery using mobile uncle(just select boot into recovery option from the app) OR power off phone...turn it back on while holding both the volume keys along with the power key to boot into recovery
select "install zip from sdcard" "choose zip from sd card"
select supersu.zip and select select yes
reboot phone from the recovery main menu...DONE you are rooted!
Flashing a ROM
Through CWM Recovery
download the rom you want to download from the ROM list given below and transfer the zip file to sdcard
boot into recovery
wipe cache partition
wipe data/factory reset
advanced->clear dalvik cache
mounts and storage->format /system
select "install zip from sdcard"...."choose zip from sdcard" and select the zip file of the rom you just copied
after flashing finishes, reboot phone...the first booth after flashing every rom takes a long time...wait patiently....DONE...enjoy your new ROM!
THROUGH SP FLASH TOOL
same procedure as flashing CWM....just replace CWM with the downloaded SP FLASHABLE ROM
4> Unrooting Canvas4*
open supersu app in your app drawer
goto SETTINGS tab
select full unroot
restart phone and done
*just unrooting your phone wont put it back into warranty...you need to get it to absolute stock factory level to claim any warranty so BEFORE unrooting the phone
just flash the stock rom using SP flash tools from given link
##### Another mention: taking backup of your ROM using CWM
this can be important as if you mess up while using a custom rom or you end up in a soft brick..you can recover using the backup of your ROMi advise that after installing CWM you should first make a backup of your STOCK ROM so that you can have access ti full stock unroot anytime(just restore the stock back up and unroot using supersu...easy isnt it!! no need of dwlding any stock rom)to make backup
boot into CWM recovery
goto backup and restore
create backup->yes
reboot...done!the backup files are stored in internal memory/clockwork folderkeep a copy of this folder in your PC at all times for any emergency that may arise in future(make sure you delete this folder while sending the phone for servicing under warranty)
to restore the backup
boot into recovery
select backup and restore
select restore->date if the recovery
reboot done!
MODS AND TWEAKSPERFORMANCE TWEAKS!
1>pure performace x stock- https://www.dropbox.com/s/udvv4527gco5irx/PurePerformances™X_Stock.1.4.zip
2>supremacy script v3 -installer - https://www.dropbox.com/s/srmdrleri98k4x0/V3--SupremacyScript.zip
uninstaller(if the script creates bootloop flash this) - https://www.dropbox.com/s/45idxt4ms6fo8we/V3--ScriptUninstaller.zip3>
viper for android(audio tweak) -http://www.mediafire.com/download/cz6l67mk81zsyq4/ViPER4Android_FX_v2330.zip
TWEAKS:
1>X-reality engine-Download
2>Xposed frameworks- Download
3.Xposed Revert Patch- Download
I will simplify this thread in future. I know its bit complicated but will help you and me also cause getting too many messages asking for this.

Answer To All Your Questions About Rooting.
WILL ROOTING VOID MY WARRANTY? -yes it will
I CANNOT NAVIGATE THROUGH CWM RECOVERY? -use volume up and down keys to navigate and the power key to select
I lost/forgot my phone's pin/password/pattern -wipe data/factory from CWM if not rooted or CWM not installed...just boot into the stock recovery using the power and volume keys and wipe data from there....the volume keys are used for navigation and the OPTIONs soft capacitive key is for select.....
camera quality sux -install a third party camera...preferably LG camera or lenovo supercam
how to swap memory cards? -follow this tutorial here by cursed4eva http://www.youtube.com/watch?v=aSKW2l87Jy8or flash the swapper.zip from conditionzero rom
which driver to choose in viper?-the one with neon and cortex9
how to enable gravitybox and xposed-follow these steps1>install xposed frameworks and gravitybox from provided links2>open xposed frameworks and goto frameworks tab....click on install framework3>now goto modules tab in xposed frameworks...and tick gravitybox4>reboot phone......done!
8. how to swap and unswap memory cards? - use this to swap - https://www.dropbox.com/s/x41q1l5d415fcz6/swapper.zip -to unswap - https://www.dropbox.com/s/u7yj24jvdflleef/unswapper.zip
8>wallpapers for canvas 4here is a collection from various users of canvas4....hope you can add up to this collectionhttps://www.facebook.com/media/set/?set=oa.232134836961025&type=1
WHAT IS ROOTING???(credits to Amit Taksali sir for this info)
ROOTING : WHAT IS IT?
The act of rooting is similar to yourself giving administrator privileges( as in your windows OS).
You gain access to root directory in system partition. In other words you gain total control on your device.
You may be familiar with Windows OS on your PC, so with windows or linux OS you have got guest user and an administrator. On your android device that you get out of the box the android OS comes only with guest user privileges and all the restrictions of it.
To gain access to administrator privileges and access system folder on your android device you need to root and this act is called ROOTING.
WHY TO ROOT?
If you dont have any other reason to root you should do it for the power of back ups. Tf something goes wrong with your device we normally do a factory-reset and will loose all our data and apps.
Setting-up your device again would be painstakingly boring and repetitive. Today we have various forms of back-ups that help us to restore our device as it was working perfectly before(for ex: an app named TITNIUM BACKUP gives you complete control on your apps).
After rooting flashing a custom recovery will help us a lot to make an nandroid backup of the complete ROM. The major benefit of flashing custom recovery is when flashing custom roms ad other customizations to our current rom. We can make an nandroid backup so that if something goes wrong , all we have to do is restore the nandroid backup and we still have a working device as it was before. We can also remove unwanted bloatware(pre-installed system apps) from our device and free up some space for other usefull apps.
Custom roms and custom recovery are more popular reasons for rooting. The best part of custom roms is that it can breath a new life to your ageing device and also boost the performance. Overclocking your cpu to get max performance can be done by rooting. If your burning through your battery you can undervolt the kernel and underclock the processor, to increase the battery life at the cost of performance.
There are tons of applications that requires root access such as TITANIUM BACKUP, ROOT EXPLORER, WIFI KILL, AD-FREE etc which comes with lots of power.
Now we may wonder why does the manufacturer holds back root access????????????
Most android users are influenced by the software or the user interface(UI) that the manufacturer applies on top of the vanilla android or pure android. Take an example of galaxy s3 and s4.
The manufacturer will provide the latest version of android on their latest device(s4) rather than an older device(s3). They may also hold back an update for older s3. By rooting we can get latest android through custom roms on our older devices(s3) which may attract the customers to buy cheaper s3 than s4. The manufacturers do not want to loose these customers and that is why they hold back root access.
By rooting our device we can also get the latest updates to our device before the manufacturer provides it officially. Sometimes the manufacturer stops updates for older devices as google did for galaxy nexus. But there are many custom roms that have provided the latest kitkat to those devices.
Here we have a huge benefit that the developers of custom roms are not held by any restrictions like the device manufacturers.
For example samsung can never provide you with beats audio or bravia engine to your samsung devices, but we can enjoy the awesome beats audio as well as bravia engine using custom roms.
They will provide you with custom roms that will give these special effects on your device.
WHAT ABOUT WARRANTY AND HARD BRICKS???
Most of the people are hindering to root their device because of damage to warranty. This is not an issue at all as you can completely UNROOT your device back to stock and send ot for warranty without any issues. Personall I have sent my canvas hd without any issues any problems and got it repaired many times .
Speaking about breaking your device, the chances are pretty slim. It mostly happens only when we dont follow correct instructions while flashing roms or playing with the root access. I the chances of bricking device are less than 0.1% once again if you get stuck on bootloop or something like that there are lots of developers on XDA and other forums who will help you to come out of these problems and restore your device to working coditions.
At the end of the day its your money, you have paid for it. When you cant take a PC with only guest user access then why take it with android. Use yor device completely and explore the complete power of android.
HAPPY ROOTING.
CUSTOM ROMScustom roms are modded systems/OS that are made for our device....these can improve our device's performance or looks.....different custom roms have different features...some are faster while some bring another device's UI to our device...advantages of custom rom-renews the cell if you are bored with the old softwares-in case of canvas4...some games dont work on the stock rom...so a custom rom comes in handy if you are a gamerdisadvantages-not all custom roms are perfect...there are certain bugs present in each...

Wow consolidated guide for rooting Great work @NeroD
Sent from my Wiko Stairway using XDA Free mobile app

taralpan said:
Wow consolidated guide for rooting Great work @NeroD
Sent from my Wiko Stairway using XDA Free mobile app
Click to expand...
Click to collapse
Thanx.. Will add a rom list soon.

thanks! i was waiting for this!

script uninstaller link not working.
also, which performance script gives a better effect - supremacy or pure performance

AWESOME!!!!!!!!!! #Nihar Grt Work.... really appreciate that men....

CWM Link
Bro the link for CWM is not working...update it
n could tell me if the CWM recovery by masterawesome works or not? for me it always gets stuck on backing up boot image

IF THat is the case !
Prometheus1408 said:
Bro the link for CWM is not working...update it
n could tell me if the CWM recovery by masterawesome works or not? for me it always gets stuck on backing up boot image
Click to expand...
Click to collapse
use only the working cwm
as master awesome's recovery is not complete yet i believe (don't know about others )
although i have been able to use it to backup ROM's but
can't say why not your and if you want to tell this to master awesome post a logcat mentioning him (master awesome ) in comments !

Nice work
Well done, very informative!

Root Micromax C4 v3
NeroD said:
This thread will hold all questions about Rooting of Canvas 4.
Required Softwares that any canvas4 owner should have
canvas4 drivers- Download
new drivers32 bit - Download
64 bit-Download
flash tools - https://www.dropbox.com/s/8rlvzjcovxo7fgl/SP_Flash_Tool_v3.1304.0.zip"]Download[/URL]
new drivers32 bit -Download
64 bit- Download
Motochopper -
link 1 - Motochopper Root Tool
link2 Alternate Link
supersu.zip - Click here
CWM RECOVERY(SP tools flashable)- Click here
RECOVERY(Mobile Uncle Image)-extract the cwm sp flash recovery and use same recovery.img
CANVAS4 stock recovery- Click Here
----------------------------------------------------------------------------------------------------------------------
TUTORIALS **installing xposed frameworks and gravitybox
All About Xposed
Rooting Canvas 4 A210 : (By V.K.A)
A Simple Youtube Video
----------------------------------------------------------------------------------------------------------------
Installing CWM recovery
THROUGH SP FLASH TOOLS
Install the canvas4 drivers
Download and install SP flash tools to your PC also download and extract the Flashable CWM
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted CWM
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
THROUGH MOBILE UNCLE TOOLS(requires root...chk rooting procedure below)
download mobile uncle CWM..extract it and transfer RECOVERY.img to your phone's sd card
download mobile uncle toolkit from playstore and open it
select "update recovery" option and select the recovery.img file in your SD card
restart phone and done!
Rooting Canvas4
USING EXPLOIT:
using an exploit means using an available loophole in the firmware to root...this is done automatically by softwares like MOTOCHOPPER and FRAMAROOT
MOTOCHOPPER
Download MOTOCHOPPER and extract it to a folder in your PC
connect your phone to PC via USB cable
open the folder containing motochopper and start run.bat
a command prompt window will open...just follow onscreen steps
your mobile will reboot in some time....and DONE!!
FRAMAROOT(easiest method to root)
download framaroot app from the xda link given above
install framaroot and start the app
follow onscreen instructions
reboot phone done!NOTE: ROOTING WORKS WITH FRAMAROOT VERSION 1.5 and abv
WITHOUT USING EXPLOIT: this method doesnt use a loophole but forces the root on your device...which means this method is always successful...however you need CWM installed for this method...which can be easily installed using SP flash tools(see above)
FLASHING SUPERSU
install CWM by using the method of SP flash tool
download supersu.zip from above links transfer it to your SD card
boot into recovery using mobile uncle(just select boot into recovery option from the app) OR power off phone...turn it back on while holding both the volume keys along with the power key to boot into recovery
select "install zip from sdcard" "choose zip from sd card"
select supersu.zip and select select yes
reboot phone from the recovery main menu...DONE you are rooted!
Flashing a ROM
Through CWM Recovery
download the rom you want to download from the ROM list given below and transfer the zip file to sdcard
boot into recovery
wipe cache partition
wipe data/factory reset
advanced->clear dalvik cache
mounts and storage->format /system
select "install zip from sdcard"...."choose zip from sdcard" and select the zip file of the rom you just copied
after flashing finishes, reboot phone...the first booth after flashing every rom takes a long time...wait patiently....DONE...enjoy your new ROM!
THROUGH SP FLASH TOOL
same procedure as flashing CWM....just replace CWM with the downloaded SP FLASHABLE ROM
4> Unrooting Canvas4*
open supersu app in your app drawer
goto SETTINGS tab
select full unroot
restart phone and done
*just unrooting your phone wont put it back into warranty...you need to get it to absolute stock factory level to claim any warranty so BEFORE unrooting the phone
just flash the stock rom using SP flash tools from given link
##### Another mention: taking backup of your ROM using CWM
this can be important as if you mess up while using a custom rom or you end up in a soft brick..you can recover using the backup of your ROMi advise that after installing CWM you should first make a backup of your STOCK ROM so that you can have access ti full stock unroot anytime(just restore the stock back up and unroot using supersu...easy isnt it!! no need of dwlding any stock rom)to make backup
boot into CWM recovery
goto backup and restore
create backup->yes
reboot...done!the backup files are stored in internal memory/clockwork folderkeep a copy of this folder in your PC at all times for any emergency that may arise in future(make sure you delete this folder while sending the phone for servicing under warranty)
to restore the backup
boot into recovery
select backup and restore
select restore->date if the recovery
reboot done!
MODS AND TWEAKSPERFORMANCE TWEAKS!
1>pure performace x stock- https://www.dropbox.com/s/udvv4527gco5irx/PurePerformances™X_Stock.1.4.zip
2>supremacy script v3 -installer - https://www.dropbox.com/s/srmdrleri98k4x0/V3--SupremacyScript.zip
uninstaller(if the script creates bootloop flash this) - https://www.dropbox.com/s/45idxt4ms6fo8we/V3--ScriptUninstaller.zip3>
viper for android(audio tweak) -http://www.mediafire.com/download/cz6l67mk81zsyq4/ViPER4Android_FX_v2330.zip
TWEAKS:
1>X-reality engine-Download
2>Xposed frameworks- Download
3.Xposed Revert Patch- Download
I will simplify this thread in future. I know its bit complicated but will help you and me also cause getting too many messages asking for this.
Click to expand...
Click to collapse
Bro m not able to root canvas 4 v3 official rom pls help
Bernay

Requirements for a 2ND ROM !!!
I want to ask something that i have previously installed speed v2 rom on my canvas 4 . now i want to install pure xperia z2 rom on my phone. So for that should i again root and install cwm revovery or just install rom from zip file ?? and should i delete some files of previous rom ?
Sorry for a silly question . as i am new for it

how to increase ram canvas 4 ?
How can I increase ram of micro ax canvas 4 ?

Link Error!
Blank page and Error-404 shows up when i try to open the link for Canvas 4 drivers and 64 bit drivers respectively. Please look into this issue. Regards.

CWM recovery (sp tool flashable) download link shows 'file not found'
Can u please reup that file.?
Sent from my A210 using XDA Free mobile app

I am on stock ROM 1.0 by neroD, gmail and google app, maps applications force closing what to do anyone help me.
Sent from my A210 using XDA Free mobile app
---------- Post added at 01:26 PM ---------- Previous post was at 01:21 PM ----------
Hi... I am using stock ROM V3 1.0 SUCH some applications are not running force closing.
Sent from my A210 using XDA Free mobile app

Change Your Rom
rams225 said:
I am on stock ROM 1.0 by neroD, gmail and google app, maps applications force closing what to do anyone help me.
Sent from my A210 using XDA Free mobile app
---------- Post added at 01:26 PM ---------- Previous post was at 01:21 PM ----------
Hi... I am using stock ROM V3 1.0 SUCH some applications are not running force closing.
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
Change Your Rom . I would Suggest PureXperia Z2 or Colossus v5. These Rom Don't have the issues you are facing.
---------- Post added at 07:31 PM ---------- Previous post was at 07:15 PM ----------
HiteshMakol said:
I want to ask something that i have previously installed speed v2 rom on my canvas 4 . now i want to install pure xperia z2 rom on my phone. So for that should i again root and install cwm revovery or just install rom from zip file ?? and should i delete some files of previous rom ?
Sorry for a silly question . as i am new for it
Click to expand...
Click to collapse
You don't have to root and install CWM again as you have done it once. PureXperia Z2 is already rooted. You have to just install the rom from the zip file. Follow the installation instructions in this post . Good Luck

[DIY ROM] B5x Based Rom Add what you want

I take no responsibility for any damge caused.
You will make customize this rom yourself by following these isntructions:
Step 1
Firstly Download the necessary files:
B132*= http://dl-uk.huaweinews.com/index.php?dir=Roms/Ascend-P6/
B510*= https://drive.google.com/?usp=chrome_app#folders/0ByjEFdm-4A3EQlZuejlla2xaUTQ
Stock Recovery*= http://www.androidfilehost.com/?fid=23252070760973625
TWRP Recovery^= http://www.androidfilehost.com/?fid=23329332407572611
Adb Drivers*= http://adbdriver.com/upload/AdbDriverInstaller.exe
Pure Graphic HD Mod^= http://www.mediafire.com/download/zi7q6fk7cm9lclq/Pure_Graphic_HD_(Rendering+Version).zip
Pure Performances Stock^= http://www.mediafire.com/download/q0a4crr8aq4gm24/PurePerformances™X_Stock.1.4.zip
Pure Audio^= http://d-h.st/32h
Bravia Engine^= http://www.dropbox.com/s/l1m3q18g64yb0av/Sonyengines4.0+.zip
Minimal ADB and Fastboot ^= https://docs.google.com/file/d/0B1S0LCuXCnnmSWh6NGJmSE1BUWc/edit
^ is optional and * is a must
Step 2 Method A
Now the steps will be different depending on what rom you currently have installed if you have a custom or beta firmware/rom installed and twrp you will need to:
Firstly Flash Your Recovery to Stock = http://forum.xda-developers.com/showthread.php?t=2636231
Flash B132= Extract the B132 file and copy it's dload folder onto your internal memory>then reboot your phone into recovery by>holding pwr+vol up+ vol down continuously untill it starts recovery>after it finishes setup your phone then follow the next step
Flash B510 =(do not flash with recovery) do so by taking the zip file as is(do not extract) and copying it onto your P6's internal memory under the dload folder(if it's not there create it) then on your P6's goto settings>about phone>system update>local>update then let it update.When it's done you have successfully installed Kitkat, if you want go on to (optional further steps)
Flash TWRP = http://forum.xda-developers.com/showthread.php?t=2636231 then
Install the mods =Reboot to Recovery>hold pwr+vol up+ vol down continuously untill it starts> Start with Pure graphics>Pure Performance>Pure audio>Bravia>then clear cache> Reboot > And You are done you have a optimized B510 rom
Or if you are already on a stock rom like B111 or so then you can just:
skip the 1 instruction on the list and just do the rest.
[Note]
You can replace B510 with B512,B513 if you wanted to.
B512 = http://dl-uk.huaweinews.com/index.php?dir=Roms/Ascend-P6/&file=B512.zip
B513 = http://dl-uk.huaweinews.com/index.php?dir=Roms/Ascend-P6/&file=B513.zip
Method B
1. Start with Paranoid Android, OMNI or any other AOSP-based ROM.
2. Back up all data with Titanium backup and copy everything you need from your internal storage. ATTENTION: The internal storage will be wiped while flashing, so the backup MUST be on your SD-Card.
3. Copy dload folder to SD-Card or internal storage. (there should be no difference)
4. Boot to TWRP and make a backup in-case something goes wrong.
5. In TWRP wipe everything except internal and external storage.
6. In TWRP choose reboot to bootloader. Confirm that no OS is installed and don't install SuperSU.
7. Plug your phone in your PC and open a CMD.
8. Download B510 recovery.img and boot.img from this thread http://forum.xda-developers.com/show...php?p=51718316.
9. Follow the instructions by @surdu_petru(method1)
(or use this(method 2)choose install recovery image first, then the boot image
or use Method 3>
copy both the recovery and boot img files to your adb folder then>
run these commands:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot reboot recovery
. IMPORTANT: When the flashing is finished and the phone reboots unplug the USB cable then wait for recovery to open and let it install.
10. You are finished!! The first boot takes some time no need to panic.
Additional:
Reinstall TWRP and flash SuperSU for Root. Than you can restore your backup you made in the second step.
[credit for discovering it's possible to install B510 directly from Aosp based roms goes to @taaeem= original post]
Rooting:
Try these:
XDA Root List = http://forum.xda-developers.com/showthread.php?t=2390491
Motochopper = http://www.hexamob.com/downloads/motochopper.zip
Doomlord's Exploit = http://forum.xda-developers.com/showthread.php?t=1321582
Bin4ry Method= http://www.schwantz-i.org/universal/Root_with_Restore_by_Bin4ry_v18.rar
SuperSu Flashing method = http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip?retrieve_file=1
Essential Apps
Titanium Backup
Wifi Analyzer
Chrome
Gmail
BBM
Whatsapp
Facebook
Messenger
Calculator++
Cpu-Z
AnTuTu Benchmark
Speedtest
Lucky Patcher
ES File Explorer
AndroZip
Root Browser
Adobe Reader
Vlc
Battery Doctor
Clean Master
Unit Converter
Software Data Cable
My Phone Explorer
Fing
Ad Away
For users struggling with bootloader and recovery issues try using this to switch to stock recovery http://www.androidfilehost.com/?fid=23501681358539086
Also for help with common problems goto http://forum.xda-developers.com/ascend-p6/help/p6-u06-common-issues-fixes-t2843810
credits for creating the mods,twrp,apps,root methods goto their respective developers.

Maybe i got you wrong, but is it possible that i share the ROM with others? Or do you mean that the DIY ROM is only for ourself?
PS: The link for Pure Graphic HD Mod does not work, theres is a typo. The right URL is
"http://www.mediafire.com/download/zi7q6fk7cm9lclq/Pure_Graphic_HD_%28Rendering+Version%29.zip"

Tried the pure audio and the pure performance mods... Audio is better...but performance not so good! Anyway...good job!! ?

Can I flash that superuser 2.02 because mine when I click its unfortunately stop im on b513 repack by surdu
Sent from my HUAWEI P6-U06 using xda premium

You can give it a try.

[ROOTING] D5322 Lollipop 5.0.2 (19.3.A.0.470) [UBL]

Finally have a rooted D5322 (T2 Ultra Dual).
Requirements:
Unlocked bootloader.
Fastboot.
boot.img with custom recovery inside. I am using boot.img from CM11, extract it from here.
SuperSU-v2.46.zip
Here is the way:
1. Activate USB debugging.
2. Flash boot.img from the link above:
Code:
flashboot flash boot.img
3. Enter recovery mode, then install UPDATE-SuperSU-v2.46.zip.
4. Flash Lollipop firmware (19.3.A.0.470) but choose kernel only to be flashed (screenshoot attached).
5. Done!
NOTE: Will be updated when I meet better internet connection. Thanks.
UPDATE (28.04.2015) : Somebody reported that /system couldn't be edited. Root explorer cant mount /system as RW.
...

Are you able to boot into recovery after flashing lollipop?

triwira said:
Finally have a rooted D5322 (T2 Ultra Dual).
Requirements:
Unlocked bootloader.
Fastboot.
boot.img with custom recovery inside. I am using boot.img from CM11, extract it from here.
SuperSU-v2.46.zip
Here is the way:
1. Activate USB debugging.
2. Flash boot.img from the link above:
Code:
flashboot flash boot.img
3. Enter recovery mode, then install UPDATE-SuperSU-v2.46.zip.
4. Flash Lollipop firmware (19.3.A.0.470) but choose kernel only to be flashed (screenshoot attached).
5. Done!
NOTE: Will be updated when I meet better internet connection. Thanks.
Click to expand...
Click to collapse
Hai.. Can you upload your extracted boot.img n give us link....
Thanks

zpr06 said:
Hai.. Can you upload your extracted boot.img n give us link....
Thanks
Click to expand...
Click to collapse
here is only the boot.img https://mega.co.nz/#!2RFBFZoR!rVrdvLSnkdfe6VS3JLUDFRLmFRtHp7hmYs2jL7hT-PY
and
https://drive.google.com/file/d/0By76vyoKsLsUQ1poSTBINWRNbWc/view?usp=sharing

What if I blink 4.4.2 kernel, use the dualrecovery by nut, do the flashes and replace only the 5.0.2 kernel rom.470, can be silly that idea, will be running? I saw that the kernel of this lollipop. 470 is 3.4.0+ as in 4.4.3,Will be running? I'm thinking of trying,Sorry for the bad English,I am using translator..

Andrey Piekas said:
here is only the boot.img https://mega.co.nz/#!2RFBFZoR!rVrdvLSnkdfe6VS3JLUDFRLmFRtHp7hmYs2jL7hT-PY
and
https://drive.google.com/file/d/0By76vyoKsLsUQ1poSTBINWRNbWc/view?usp=sharing
Click to expand...
Click to collapse
Thank you Sir! :good:

I rooted my phone following this method. Titanium Backup worked fine, but Root Explorer can't change from R/O to R/W. I think it's not rooted 100%.

rooted with this method
but can anyone give me recovery zip so i can install it.and im not able to install busybox tried so many times please help.thanks for the post...

I had the same problem, including another rom I used method like the adb, root installs, but it is not complete ... off topic, I found this rom sucks, hangs straight

thacvu said:
I rooted my phone following this method. Titanium Backup worked fine, but Root Explorer can't change from R/O to R/W. I think it's not rooted 100%.
Click to expand...
Click to collapse
vishvanjay said:
but can anyone give me recovery zip so i can install it.and im not able to install busybox tried so many times please help.thanks for the post...
Click to expand...
Click to collapse
jacitdm said:
I had the same problem, including another rom I used method like the adb, root installs, but it is not complete ... off topic, I found this rom sucks, hangs straight
Click to expand...
Click to collapse
Thread updated, I got same problem.
If you want to edit contents of /system, install boot.img from cm-12-20150226, you still can boot to homescreen and getting full root access. But some drivers not work, so you cant change brightness, using camera, etc.
When u have finish, just flash stock kernel then every thing well work.

I'm downloading this 12 cm and I do hope it works, so do root to uninstall apps that do not use and other little things, Ro / rw is so precise WHAT ... thanks for as friend... ........ .Edit.......Then I flash this kernel, flash recovery and everything, I turn on the device, delete the apps I need to delete WHAT must install and reflash standard kernel ?? That's it?Then, after flash standard kernel I lose the option to change permissions or continue? Think back as it was right? thank you

triwira said:
Thread updated, I got same problem.
If you want to edit contents of /system, install boot.img from cm-12-20150226, you still can boot to homescreen and getting full root access. But some drivers not work, so you cant change brightness, using camera, etc.
When u have finish, just flash stock kernel then every thing well work.
Click to expand...
Click to collapse
Unsuccessfully, my d5322 not care with this kernel ...

Finally I get full root. My steps are:
1. Backup data, prepare following files:
a. Flashtool from http://www.flashtool.net/downloads.php
b. "PRFCreator v0.8.zip" from http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
c. Dual recovery "T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip" from http://nut.xperia-files.com/
d. "BETA-SuperSU-v2.49.zip" from https://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
e. CM11 boot image file "boot.img" from http://forum.xda-developers.com/showpost.php?p=60356750&postcount=4
f. OS 4.4.3 pre-rooted "T2 Ultra D5322.zip" from http://forum.xda-developers.com/t2-ultra/development/t2-ultra-d5303-4-4-3-pre-rooted-stock-t2962677
g. OS 5.0 ftf file "D5322_19.3.A.470_Customized IN PIEKAS.ftf" from http://forum.xda-developers.com/t2-ultra/development/5-0-2-ftf-19-3-470-d5322-t3091608
2. Use PRFCreator make flashable.zip file from OS5.0 ftf file + BETA-SuperSU-v2.49.zip + T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip like step 3 of this thread http://forum.xda-developers.com/t2-ultra/general/noobroot-lollipop-d5322-lb-ub-t3095090
3. Copy flashable.zip, T2 Ultra D5322.zip, T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip into phone
4. Flash CM11 boot.img in fastboot mode. Command: fastboot flash boot boot.img. While finish, reboot phone to recovery
5. FULL WIPE, Flash "T2 Ultra D5322.zip" and "T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip". Reboot phone normally, have rooted OS4.4.3. Can setup something and check root
6. Reboot to recovery again, flash OS5 flashable.zip file. NO WIPE
7. That's all. No issue. R/W works fine

thacvu said:
Finally I get full root. My steps are:
1. Backup data, prepare following files:
a. Flashtool from http://www.flashtool.net/downloads.php
b. "PRFCreator v0.8.zip" from http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
c. Dual recovery "T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip" from http://nut.xperia-files.com/
d. "BETA-SuperSU-v2.49.zip" from https://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
e. CM11 boot image file "boot.img" from http://forum.xda-developers.com/showpost.php?p=60356750&postcount=4
f. OS 4.4.3 pre-rooted "T2 Ultra D5322.zip" from http://forum.xda-developers.com/t2-ultra/development/t2-ultra-d5303-4-4-3-pre-rooted-stock-t2962677
g. OS 5.0 ftf file "D5322_19.3.A.470_Customized IN PIEKAS.ftf" from http://forum.xda-developers.com/t2-ultra/development/5-0-2-ftf-19-3-470-d5322-t3091608
2. Use PRFCreator make flashable.zip file from OS5.0 ftf file + BETA-SuperSU-v2.49.zip + T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip like step 3 of this thread http://forum.xda-developers.com/t2-ultra/general/noobroot-lollipop-d5322-lb-ub-t3095090
3. Copy flashable.zip, T2 Ultra D5322.zip, T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip into phone
4. Flash CM11 boot.img in fastboot mode. Command: fastboot flash boot boot.img. While finish, reboot phone to recovery
5. FULL WIPE, Flash "T2 Ultra D5322.zip" and "T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip". Reboot phone normally, have rooted OS4.4.3. Can setup something and check root
6. Reboot to recovery again, flash OS5 flashable.zip file. NO WIPE
7. That's all. No issue. R/W works fine
Click to expand...
Click to collapse
is all your root app's working fine till now?
no bootloop & other issues?

not root dear.
triwira said:
Finally have a rooted D5322 (T2 Ultra Dual).
Requirements:
Unlocked bootloader.
Fastboot.
boot.img with custom recovery inside. I am using boot.img from CM11, extract it from here.
SuperSU-v2.46.zip
Here is the way:
1. Activate USB debugging.
2. Flash boot.img from the link above:
Code:
flashboot flash boot.img
3. Enter recovery mode, then install UPDATE-SuperSU-v2.46.zip.
4. Flash Lollipop firmware (19.3.A.0.470) but choose kernel only to be flashed (screenshoot attached).
5. Done!
NOTE: Will be updated when I meet better internet connection. Thanks.
UPDATE (28.04.2015) : Somebody reported that /system couldn't be edited. Root explorer cant mount /system as RW.
...
Click to expand...
Click to collapse
not working brother

help me to rrot my d5322
triwira said:
Finally have a rooted D5322 (T2 Ultra Dual).
Requirements:
Unlocked bootloader.
Fastboot.
boot.img with custom recovery inside. I am using boot.img from CM11, extract it from here.
SuperSU-v2.46.zip
Here is the way:
1. Activate USB debugging.
2. Flash boot.img from the link above:
Code:
flashboot flash boot.img
3. Enter recovery mode, then install UPDATE-SuperSU-v2.46.zip.
4. Flash Lollipop firmware (19.3.A.0.470) but choose kernel only to be flashed (screenshoot attached).
5. Done!
NOTE: Will be updated when I meet better internet connection. Thanks.
UPDATE (28.04.2015) : Somebody reported that /system couldn't be edited. Root explorer cant mount /system as RW.
...
Click to expand...
Click to collapse
is this method work on 19.3.A.0.472

[Tutorial] How to root and install custom ROM and recovery.

Hello guys , this is my first topic and I want to tell you how to customize your phone.
First : Rooting
You have to root before doing any thing , you can root your phone by a lot of ways
1- Rooting by PC , you can find alot of rooting programs that is very easy to use like : Kingo root, wondershare mobile Go , king root and a lot more , but the best tool is Kingo root for PC , you can download it from the official website
After downloading you have to install it and your phone usb drivers and enable USB debugging in developers options , then connect your phone to PC via USB cable
The click Root! , wait until the rooting is completed and you have a root!!
2- rooting without PC ,there are a lot of tools like King root, Kingo root , towelroot and framaroot and more , I prefer king root because it is supporting a huge list of devices , you can download it from the official site after downloading you have to check unknown sources from Applications settings before installing , once you did you can install it after installing open it and wait to check if there is a strategy for rooting your phone , if it is found one click on root and wait for it to complete rooting ,
3- installing SuperSU , SuperSU is the best root permissions management app , it is supporting a lot of languages and it is more safety then king root or Kongo root apps ,
You can download it from Play store or install it easily by a custom recovery ,
First download it from play store and open it and give it a root permission , then the app will install its binary and important files , if it is saying fails to install you can go to king root app and go to options then root options the clean root , it will uninstall its self then retry to update SuperSU binaries it should be installed now
Second : installing custom recovery,
If you have Samsung device then this will be very easy to you.
1 - by odin ROOT is not important , you have to download these files : Odin3.xx , Samsung drivers and your recovery file ,
[WARNING! ] you can't install other device recovery file even if it is the same in shape or model with few changes or this will brick you phone ,
How to install : shut down your device and put it into downloading mode by pressing power + volume down and home buttons in the same time , a warning press volume up button and connect your device via USB cable and open Odin by administrator , there will be a blue bar on options tabs , press on PDA or AP button and select your recovery file , the press start DONT disconnect the USB or your device will be damaged , a progress bar will appear on your phone screen , wait for few seconds and a PASS!! message in a green bar will appears in Odin , then you can disconnect you phone from USB , you can go into recovery by pressing power + volume up and home button s in the same time , you will find your self in recovery mode , there is different types of custom recoverys like clockworkmod (CWM) and Team Win Recovery Project (TWRP) and Philz recovery and more , you can find your recovery file in some in xda forums , remember to you your correct recovery file and flashing it correctly ,
2 - With out PC (Root is required!) : download your correct recovery file in your phone and download any comprising app like AndroZip or zArchive , I prefer zArchive and flashing app like Flahfy or Mobile uncle tool or Rasht , after downloading the apps and your recovery file and flashing and archiving apps , go into zArchive or any other app and rename your recovery file which it is name with .tar.md5 at the last of its name with recovery.tar and click on file after renaming it and extract it , then go to flashing app like Rasht and click on recovery from SD card and select your recovery file and flash it , remember to give it root permission , now you have a custom recovery, you can flash a custom recovery by this method for any device
Like LG or HTC or any other device.
Third : installing custom ROMs :
Installing Custom ROMs is the coolest feature of custom recoveries , the rom is the operating system of your phone or tablet , you can find better ROM for your device and faster like CyanogenMod or AOSP or other custom ROMs which it is better than original ROM , you can go to CyanogenMod or AOSP website and search for your device , and download your phone or tablet custom ROM which its format is .zip ,
After downloading your ROM file shutdown your device and go into recovery mode by pressing power + volume up and home buttons , select install zip from SD card if the file is in your external SD card or install zip from internal SD card if it in internal storage , select your ROM file and flash it after flash is completed wipe cache and data the reboot your phone , you are in you new ROM now !!
you can get root permissions by flashing chain fire flash able zip file , you can download it from chainfire website .
Thank me if you liked this tutorial

Thanks
thanks it was useful for me to discover that CyanogenMod and AOSP are useful to search for. Im trying to seek out if there exists a C-rom for my old Asus tablet.