my canvas 4 stuck at booting logo plz help - Micromax Canvas 4 A210

Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.

chejetikoti said:
Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
Click to expand...
Click to collapse
first full charge your phone,downlaod orignal stock rom, make you sure your mobile driver correctly installed in your pc,and then flash with sp flash tool. more for information try this procedure :
http://forum.xda-developers.com/canvas-4/general/guide-flashing-guide-sp-flash-tool-t2745892
---------- Post added at 09:31 AM ---------- Previous post was at 09:24 AM ----------
chejetikoti said:
Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
Click to expand...
Click to collapse
if you face connection problem with SP flash tools...then try this driver (install in your pc)
http://d-h.st/xkW

thank you.
007jigar said:
first full charge your phone,downlaod orignal stock rom, make you sure your mobile driver correctly installed in your pc,and then flash with sp flash tool. more for information try this procedure :
http://forum.xda-developers.com/canvas-4/general/guide-flashing-guide-sp-flash-tool-t2745892
---------- Post added at 09:31 AM ---------- Previous post was at 09:24 AM ----------
if you face connection problem with SP flash tools...then try this driver (install in your pc)
http://d-h.st/xkW
Click to expand...
Click to collapse
thank you so much, now its working I tried with new driver, so its done

Now I am facing new problem, with my WCDMA only mode,.. after flashing if I select WCDMA only mode network getting disconnected and showing Cross mork on indicater, previously I used WCDMA only mode on same mobile with same sim, I am using aircel Karnataka , and I am staying in Bangalore.. ANY Solutions for it,..

chejetikoti said:
Now I am facing new problem, with my WCDMA only mode,.. after flashing if I select WCDMA only mode network getting disconnected and showing Cross mork on indicater, previously I used WCDMA only mode on same mobile with same sim, I am using aircel Karnataka , and I am staying in Bangalore.. ANY Solutions for it,..
Click to expand...
Click to collapse
if you using stock rom...then take hard reset your phone...reinsert your sim.

I did hard reset and removed and inserted sim again, but still I am facing same problem. every time when I do hard Reset My mobile IMEI Numbers are Going to INVALID... why?

ok so the main issue is the IMEI number....are you backup your IMEI number ? try this i think it's help you
http://forum.xda-developers.com/showthread.php?t=2380700

yeh i am doing this always when do hard reset
007jigar said:
ok so the main issue is the IMEI number....are you backup your IMEI number ? try this i think it's help you
http://forum.xda-developers.com/showthread.php?t=2380700
Click to expand...
Click to collapse
I am doing this every time,, but after that only I am getting the WCDMA only not working problem, if I select network ball will crossed, no network for it, I checked the same sim in other mobile its working properly

IMEI number successfully installed or not? check the stock rom properly downloaded on your pc or not? again flash the stock rom...Actually i am alos NEWBIE..and i faced some soft-break problem in canvas...but the problem successfully solved with to flash the stock rom...so try it

007jigar said:
IMEI number successfully installed or not? check the stock rom properly downloaded on your pc or not? again flash the stock rom...Actually i am alos NEWBIE..and i faced some soft-break problem in canvas...but the problem successfully solved with to flash the stock rom...so try it
Click to expand...
Click to collapse
IMEI NUMBERS installing is successful I will try again to flash my phone again may ne it will work properly

installation aborted status 7
Plzz help me out guyzzz I tried to install this rom but it was showing error as installation aborted status 7
Now my phone is stuck on the logo plzz help me wat to do

Micromax q334
I face same problem on my micromax q334 please send driver link for my phone urgent.

Related

[Q] my note 2 restart in samsung logo

good day
my mobile write failed to mount efs
plz help me my phone was in my hand and restart his self and stoke in n7100 logo
it was rooted and i try to format cash and partition nothing happend and try factory rest
i try to install rom with 5 files when i install it it stoke in Samsung logo and take a very long time when i restart it it show the n7100 logo and restart his self and show the logo agine :crying::crying:
steve.89 said:
good day
my mobile write failed to mount efs
plz help me my phone was in my hand and restart his self and stoke in n7100 logo
it was rooted and i try to format cash and partition nothing happend and try factory rest
i try to install rom with 5 files when i install it it stoke in Samsung logo and take a very long time when i restart it it show the n7100 logo and restart his self and show the logo agine :crying::crying:
Click to expand...
Click to collapse
Download latest stock from sammobile and flash
tonylee000 said:
Download latest stock from sammobile and flash
Click to expand...
Click to collapse
thanx but the problem was in buttery and now i have new software but the new problem is ( not register network ) and the imie was correct
steve.89 said:
thanx but the problem was in buttery and now i have new software but the new problem is ( not register network ) and the imie was correct
Click to expand...
Click to collapse
What bootloader do you have installed?
Phone Info https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo

rom upgrade fail Lenovo s850

hello,need some expert advice her, i bougth a Lenovo s850 from china and i needed a multilang. rom on it wich i found on needrom but when i was finshing flashing it it went into a bootlop and now its completely dead. is it any thing to do her or have i got my self a 200$ piece of junk
graatenbil said:
hello,need some expert advice her, i bougth a Lenovo s850 from china and i needed a multilang. rom on it wich i found on needrom but when i was finshing flashing it it went into a bootlop and now its completely dead. is it any thing to do her or have i got my self a 200$ piece of junk
Click to expand...
Click to collapse
Try to explain better! Do you have installed custom recovery?
no i installed a modified multi language rom from "needroom" did every as told and everything looked fine during the upgrade and when i was finished i got the green circle that says it was ok but when started it up it went in to boot loop and said "TOOL DL image fail!" but after a while its totally dead.,when i try now it wont load in any software into the phone ,just starts up the purple pre preparation on the SP flash tool but when i connect the phone it stops .cant get it into recovery mode or anything,just completely dead. i would rely be thankful for some advice her
Maybe the package you've tried to install is corrupted.
most likely, but is there anything to do with it or is it over for it.
graatenbil said:
most likely, but is there anything to do with it or is it over for it.
Click to expand...
Click to collapse
Most likely your device is unusable. Without any recovery, I dont think you will be able to do anything. I am sorry.
OK a 200$ experience richer , thanks anyway
graatenbil said:
OK a 200$ experience richer , thanks anyway
Click to expand...
Click to collapse
Just a question....are you able to enter fastboot?
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
graatenbil said:
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
Click to expand...
Click to collapse
hello my friend. I got exactly the same thing that I just tried to install TWRP. I stuck in Boot loop. solution found by disconnecting the battery. and making again the same procedure. but once I checked her DA DL All. Now how puts the battery is another story .but if I want i tell you, you need some tools that may have in your home..
graatenbil said:
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
Click to expand...
Click to collapse
Question: When you connect the phone with your pc (usb cable) does the pc makes any sound (connected device sound)?
setmov said:
Question: When you connect the phone with your pc (usb cable) does the pc makes any sound (connected device sound)?
Click to expand...
Click to collapse
Same problem here. Trying to install twrp and got stuck in => FASTBOOT mode ...
The computer makes a sound when i connect the USB cable but i don't have adb connection.
How can I solve this problem?
Do I leave it to finnish the baterry and than try to start?
RE
leo_alex82 said:
Same problem here. Trying to install twrp and got stuck in => FASTBOOT mode ...
The computer makes a sound when i connect the USB cable but i don't have adb connection.
How can I solve this problem?
Do I leave it to finnish the baterry and than try to start?
Click to expand...
Click to collapse
The phone started in normal mode after the battery dryed and the phone went off.
Hi, has anyone Lenovo S850 firmware upgrade solution? Now I have resolve "DL Tool Image Fail" problem but have another problem - every rom I download touch screen doesn't work. On "original" rom (not multilanguage) touch screen worked properly. Does anyone have "good" multilanguage rom with touch screen working?
method to install original rom android 4.4.2 in lenovo s850
i have found the perfact solution to install original 4.4.2 rom on lenovo s850...so for that you have to donload rom from the link in notepad file...i have uploaded notepad file and download link is in that it is about 1.1 gb...so it will take time to download and after that what you have to do is open flash tool and then check da dl check sum and then extract the file you have download of 4.4.2 android and then in flash tool click on scater loading and browse to the the extraction location and in extracted folder there will be a folder somethinf target bin in that folder select scatter loding file of lenovo s850 and then just simply click on upgrade firware and then switch off your phone and then wait to process complete untill green circle come...and if you dont have flash tool...google it and download...thanks i hope this helps someone...:good::good::good::good:
Dear devs, help me out on UNBRICKING LENOVO S850:
Initial Problem was: AFTER TURNING PHONE ON (NORMAL BOOT UP) IT GOT STUCK ON BOOT LOGO.
Very first tried solution: PRESSING BOTH VOL.+POWER PHONE WENT IN LENOVO RECOVERY MODE. THEN I TRIED TO FUSE FORMAT BUT IT FAILED TO FORMAT. PROBLEM REMAINED SAME.
Second Tried Solution: DOWNLOADED OFFICIAL STOCK ROM (A. Lenovo_S850_VIBEUI_V1.5_1419_2_ST_S850_4.4.2 B.Lenovo_S850_ROW_S211_140923 C. Lenovo_S850_ROW_S207_140814. D. Lenovo S850 official firmware flash file) + ALL AVAILABLE SP FLASH TOOLS + USB VCOM DRIVER FOR MEDIATEK AND INSTALLED DRIVERS.
USING ABOVE FILES I TRIED TO DOWNLOAD ALL ROMS WITH DIFFERENT SP FLASH TOOLS VERSIONS BUT ALL THE TIME RED BAR CAME TO 100% THEN BAR STUCK ON 0% FOLLOWED BY ERROR "SDMMC WRITE FAIL".
THEN I TRIED UPGRADING FIRMWARE, SAME AGAIN IT GAVE ERROR "FORMAT FAILED"
THEN I TRIED TO FORMAT USING FLAH TOOL (ALL VERSIONS) AGAIN IT GAVE SAME ERROR "FORMAT FAILED"
crazy
ur cable problem pp

HTC Desire 616: Dual Sim Bricked error S_DL_PMT_ERR_NO_SPACE(5069)

HTC Desire 616 Dual Sim Bricked error S_DL_PMT_ERR_NO_SPACE(5069)
Recently i played Real racing 3 after played and close game i got error from google play store force closed, then i reboot my device i faced bootloop so i decided to clear cache still wont boot then i try to hard reset but hard reset not complete.
i tried to reinstall stock rom using sp tool i got some error S_DL_PMT_ERR_NO_SPACE(5069). I used this stock rom many time before it success but this time it was not working n give me error ,, i tried many steps i try in another pc then i tried different rom different port different version of sp tools,,, i checked memory test also (NAND Flash: ERROR: NAND Flash was not detected!)i doubt it hardware problem in my phone not software or pc problem i just want make sure....
please help me if anyone has solution for this :crying: :crying: :crying: :crying: :crying:
mine is also same problem
plz provide solution if any
same problem here. maybe bootloader locked ?
Guys I have bricked my phone and was trying to fix it using stock rom and sp flash tool but getting an error 5069.I need a back up of desire 616 which is made by mtk droid tool which include a file name "firmware.info" and includes "md5" files to unbrick it.phone is not booting up but is detected by the computer I.e phone is entering in meta mode but not booting up no Htc logo no charging only black screen help will be highly appreciable
qsusb_dload mode
Your phone in under the above mentioned title mode. One thing you can do is to reflash the bootloader and bring it back into flashable state.
braindeductions said:
Your phone in under the above mentioned title mode. One thing you can do is to reflash the bootloader and bring it back into flashable state.
Click to expand...
Click to collapse
how i can do this? bu sp flash tools? help pliz

Failed to get PMT info, is it bricked for good?

Hi,
So today suddenly my phone restarted and after that it was stuck on the micromax logo, I coudnt get into recovery either. So I tried to flash the stock kitkat rom using sp tools, it did manage to flash it the first time but the phone after that wont start at all, nothing not even the charging screen.
Is it bricked for good? I tried to flash it again but if I choose firmware upgrade or download+firmware upgrade in sp tools I get the pmt info error. Is there any way to get the phone back to a working state? Any help would be much apprecited.
Note: I did look through the old post on the similar topic where the guy managed to solve the problem by using a latest version of sp tools, Im already using the latest version , no dice.
Did you get anywhere with this to unbrick the device as I have similar with a GDP XP and it wont now boot or show charge its just dead!
Any help on fixing this would be great as we cant be alone with this. ATB

bootloop stuck d855

hello everyone ,
i need your help
i use Fulmics rom from last year but few days ago i texting from the phone . my phone sudden of then i start the phone again but it stuck on the bootloop then i try to reinstall the fulmics rom again but the problem was same. then i flash my phone with kdz method by using flash tools the phone flash show 100% but on pc its stuck on 99% then it shows error of stop working. in these all processes i also lost recovery mode when i try to go in recovery it never shows to me . pls tell me what should i do ?
one more thing i flash with another version of kdz it install and bootloop vanished but the version not supported with my device many things not working what the main reason ?
anyone?
I did not get what you said.
Explain it again with more details.
Erfan_rv said:
I did not get what you said.
Explain it again with more details.
Click to expand...
Click to collapse
i use Fulmics ROM 6.9 from last year but few days ago while texting my phone shutdown automatically then i restart the phone again but it stuck with boot-loop i try to reinstall the rom from recovery after installation the result was same. then i flash my phone with kdz global file my phone still on boot loop then i try to get back on recovery mode TWRP was automatically removed when i flashed the phone.
when i install another version of kdz file it work fine but not supported to my device but there m not facing any bootloop so what can i do now?
What do you mean not supported by my device?
Erfan_rv said:
What do you mean not supported by my device?
Click to expand...
Click to collapse
another version of kdz file which i was installed

Categories

Resources