[Q] Korean Version - TOO SLOW - G3 Q&A, Help & Troubleshooting

Dears,
Hope you are having a great time.
I just switched from using Nexus 5 to LG G3, I was really excited for this phone that I went and got the Korean version. The phone is SO LAGGY and slow, it takes (1.5 ~ 2 seconds) to launch YouTube which is pretty slow compared to the Nexus, I need some help and I have no expertise at ALL in developers stuff:
- Can I turn the LG G3 into a Stock android ? similar to how the S4 GPE ?
- What's the difference between "Rooting" and "Custom Rom" ?
- I read in the development section of the forum (can't post a comment there since I'm a new member) and there is one topic that has a light version of the LG G3 system, it seems the system is much much faster and improved, the question is, is it safe ? the owner of the topic included a zip file to download and a video in a language I don't understand, could someone help do what he did ?
Regards, :angel:

The korean versions comes with so much bloat, its unbelievable. Wait for International Version and then flash it, and it will be smooth. Its just that crap bloatware which make it slos

hamad138 said:
The korean versions comes with so much bloat, its unbelievable. Wait for International Version and then flash it, and it will be smooth. Its just that crap bloatware which make it slos
Click to expand...
Click to collapse
The phone is really getting on my nerve, I was hoping for a solution, I wish someone would explain what that video is about in the developers section, I really have no luck but the phone in the video is pretty fast

jalmass said:
The phone is really getting on my nerve, I was hoping for a solution, I wish someone would explain what that video is about in the developers section, I really have no luck but the phone in the video is pretty fast
Click to expand...
Click to collapse
I have an solution, disable bloat and some apps.
Then go developer settings and change animation to 0.5

hamad138 said:
I have an solution, disable bloat and some apps.
Then go developer settings and change animation to 0.5
Click to expand...
Click to collapse
How do you disable bloats? I already un installed everything that I can un install .. .
some bloats are left that's not accessible from the apps manager

U can deactivate it, first select deinstall updates and then disable it. Also turn animation to 0.5

hamad138 said:
U can deactivate it, first select deinstall updates and then disable it. Also turn animation to 0.5
Click to expand...
Click to collapse
Hey, sorry to bother you, can you explain step by step what to disable and how to turn down the animation? I'm a newbie .. .

First go to apps manager, select the apps u want to disable. Then go to deinstall updates. After that go to the apps again, and there will be an disable button, but some apps u cant disable
2)go to settings-->Telefon Info -- Software Information- -- tap 5 times to build number now u are an developer.
Go to settings again ---- developer option-- enable it --- scroll down to the 3 animation who are set to 1x. All 3 animation turn to 0.5x
I hope i could help u , reply if it worked

Thanks a lot
it made the phone (a bit) better.
However, I would really be glad if someone can explain to me how to do the process step by step for the topic mentioned in the developers section titled (always stay update)

Careful when testing opening the YouTube app, as that app is notoriously slow opening compared to all other apps. It takes around 2 seconds on all phones, unless it's already open. (ie, in the RAM)

Sebba513 said:
Careful when testing opening the YouTube app, as that app is notoriously slow opening compared to all other apps. It takes around 2 seconds on all phones, unless it's already open. (ie, in the RAM)
Click to expand...
Click to collapse
Thanks, I understand.
YouTube is not the ideal app to test the phone's speed, however, I will still HIGHLY appreciate your kind help with the topic I mentioned, another member posted in the developers section a thread named Always stay updated, which he explains a patch that you put in your phone to fix it, I really really need anyone's help to understand how the user did that, I have 0 experience in this.

jalmass said:
Thanks, I understand.
YouTube is not the ideal app to test the phone's speed, however, I will still HIGHLY appreciate your kind help with the topic I mentioned, another member posted in the developers section a thread named Always stay updated, which he explains a patch that you put in your phone to fix it, I really really need anyone's help to understand how the user did that, I have 0 experience in this.
Click to expand...
Click to collapse
I dont know what u mean , maybe u can link to the thread???
And are the Animations now 0.5x?

hamad138 said:
I dont know what u mean , maybe u can link to the thread???
And are the Animations now 0.5x?
Click to expand...
Click to collapse
Yes, the animation is set t 0.5x
This is the thread
http://forum.xda-developers.com/showthread.php?t=2761879
I want to do everything he did, I just don't understand

jalmass said:
Yes, the animation is set t 0.5x
This is the thread
http://forum.xda-developers.com/showthread.php?t=2761879
I want to do everything he did, I just don't understand
Click to expand...
Click to collapse
he installed a custom Rom without the bloat via ADB.
U will lose ur Warranty if u do that
and Why did u buy the Bloat Korean Version, cant u just wait????? Ur battery will also drain faster because this phone was made for Korean Networks

hamad138 said:
he installed a custom Rom without the bloat via ADB.
U will lose ur Warranty if u do that
Click to expand...
Click to collapse
I don't have a warranty to begin with .. .
I don't mind losing it as long as the phone perform as much as expected.
Can you kindly help me with that?

jalmass said:
I don't have a warranty to begin with .. .
I don't mind losing it as long as the phone perform as much as expected.
Can you kindly help me with that?
Click to expand...
Click to collapse
welll if u have teamviewer I may help u, but first download the Rom.

hamad138 said:
welll if u have teamviewer I may help u, but first download the Rom.
Click to expand...
Click to collapse
Hey,
Thanks for the offer
I downloaded Teamviewer and I have all the files.
Add me as a contact, my email is jassim.almass @ gmail . com

Youtube takes a couple seconds to launch in every device, the problem is related to the app and not the phone
Sent from my Xperia Z1

jalmass said:
Hey,
Thanks for the offer
I downloaded Teamviewer and I have all the files.
Add me as a contact, my email is jassim.almass @ gmail . com
Click to expand...
Click to collapse
I hope i helped him

i'm really confused
the box says
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LTE
but i can find only GSM/WCDMA
is it 4g or 3g help pls

Related

Does your phone have iZat?

EDIT: If you're missing iZat (read below to see if you already have it) I may have found a way to install it at http://forum.xda-developers.com/showpost.php?p=54558037&postcount=11, requires root though!
So I heard on reddit about this Qualcomm iZat, which is meant to improve the GPS location your phone gets, seems some people have it and some people don't.. I'm one of the people who don't
It sounds like all the chipsets have it though, just some phones don't have it enabled. My D855 doesn't have it, but on reddit it seems some people with the Sprint model have it and some others with the same model don't.
You can check if you have it by going to Settings -> Location -> Mode and underneath the standard options there'll be an Enhanced Location section where you can enable iZat.
If anyone here has it and wants to help us who don't out, uploading your /system/build.prop would be appreciated (it looks like theres some iZat settings in there)
If you could also check your apps to see if theres a Qualcomm iZat app installed that'd be swell
Nope, i don't have it i think?
Got a D855 (16GB) but no extra option whatsoever
Not seeing it in either of the locations you mentioned. (AT&T D850 here.)
harveydwijs2 said:
Nope, i don't have it i think?
Got a D855 (16GB) but no extra option whatsoever
Click to expand...
Click to collapse
geekaren said:
Not seeing it in either of the locations you mentioned. (AT&T D850 here.)
Click to expand...
Click to collapse
Well that's strange, I wonder why they're only enabling it on certain phones
For reference I found out about it from http://www.reddit.com/r/LGG3/comments/2c3k3s/lg_g3_and_geocaching_how_is_the_gps/cjbm9q0
Sounds like at least 3 people there have it, one on Sprint, one on Verizon and I don't know about the other one. Hopefully someone on XDA has it too and could maybe help us figure out how to get it ourselves.
AT&T G3 here, no iZat that I have found, even looking around rooted.
I'm on Sprint and I have it, I would upload the build.prop for you guys but I believe I need root and Sprint doesn't have root yet.
Sent from my LGLS990 using XDA Premium 4 mobile app
D855 european 3/32GB here, and I don't have it (I'm still on firmware 10a) but GPS works great, is very quick and accurate, no problem.
how to tell if you have one?
i see this line in my build.prop
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
Click to expand...
Click to collapse
deadh0b0 said:
I'm on Sprint and I have it, I would upload the build.prop for you guys but I believe I need root and Sprint doesn't have root yet.
Sent from my LGLS990 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ah well hopefully a root will show up soon, although maybe it's inside your KDZ too, could you maybe go to http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=*********** and change the stars to your IMEI, and copy the sw_url path here so we could take a look into it?
cnn888 said:
how to tell if you have one?
i see this line in my build.prop
Click to expand...
Click to collapse
I have the same lines in my build.prop, I think it means that iZat is disabled, but I'm not 100% sure, if you check the reddit post at http://www.reddit.com/r/LGG3/comments/2c3k3s/lg_g3_and_geocaching_how_is_the_gps/cjbm9q0 it says where you can find the setting for it.
Ah well hopefully a root will show up soon, although maybe it's inside your KDZ too, could you maybe go to http://csmg.lgmobile.com:9002/csmg/b...sn=*********** and change the stars to your IMEI, and copy the sw_url path here so we could take a look into it?
Click to expand...
Click to collapse
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=352596060206415 there it is, not sure if that is what you need, but that is my IMEI in the link.
deadh0b0 said:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=************** there it is, not sure if that is what you need, but that is my IMEI in the link.
Click to expand...
Click to collapse
Hmm well that's strange, normally it gives a link to the KDZ there, at least it does for me...
Luckily there's another way to check, I used your IMEI at http://csmg.lgmobile.com:9002/csmg/b2c/client/cs_auth_model_check.jsp?esn=************** and it gives a link to http://dl02.gdms.lge.com:5006/dn/downloader.dev?fileKey=PS47109201/LS990ZV4_04.51101.zip, that files not found but googling the name brings up some uploads from other people, time to start digging, thanks for your help :good:
Edit: Looks like we might have already cracked it
Doing searches inside the system.img in that zip for the string "IZat" I found an apk which wasn't on my phone, namely /system/app/xtra_t_app.apk, decompiling this apk showed it as being "com.qualcomm.location.XT". Seeing nothing else related to iZat that my phone didn't already have I took the plunge and installed it, and when I went to Location -> Mode I was greeted with a nice "com.qualcomm.location.XT has had to close" error. Darn! At least the enhanced location section was there, but it had no text under it, just an off/on button.
Determined, I looked into what was happening using adb logcat and it seemed like it was looking for an xt_native library which my phone was missing. I found that at /system/vendor/lib/libxt_native.so in the Sprint image and copied it to my phone, went back to settings and to my surprise the iZat option showed up!
Enabling it brought up some standard privacy policy b/s, and after saying OK to that it seems like it's enabled! Not sure how to check if its working exactly, but seeing as it looked like just this apk and lib file was missing I think it's working
A download for the apk and .so file is at https://mega.co.nz/#!DoQzgSjA!k8OeUr6W6pfhszd-kddVtzXNd7d1voWQsqN-A0D_0J8
To install it you'll need root (although there might be a way to package the .so inside the apk and skip needing it, this is my first time messing with Android since 2010 or so though so I'm a bit rusty with stuff like that)
First mount your system as r/w, running this works for me:
Code:
mount -o rw,remount -t ext4 /dev/block/platform/msm_sdcc.1/by-name/system /system
Copy the libxt_native.so to your /system/vendor/lib/ folder
Run chmod 644 libxt_native.so to set the permissions properly
Install the apk
Restart, go to the location settings and enjoy
The permissions for the apk are pretty crazy and mention some in-call purchasing things, this isn't my doing though. In case you want to verify it you can download the LS990ZV4_04.51101.zip, extract the tot using LGBinExtractor (might need a small mod to support Sprint tots), open the system.img with Ext2explore and compare the hash of the apk I uploaded with the /app/xtra_t_app.apk inside it.
Major thanks to deadh0b0 for helping us find where it was!
Anyway, enjoy
Edit: also, obligatory disclaimer that I'm not responsible for anything that happens by doing this! This is literally just-found-out-about-5-minutes-ago work, so I haven't exactly tested it long, my (3UK D855) phone seems to be working fine though, so hopefully all should be good!
Edit2: I think there might be some more to this, not getting any XT debug messages in logcat besides the settings changes, hmm..
I don't even know how it works but I have it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LGLS990 using Tapatalk
Any way to get it working on other versions than the Sprint G3?
Sent from my LG-D851 using Tapatalk
Out chipsets support it, at least my Snapdragon 801 supports it.
But I don't got the option...
http://www.qualcomm.com/snapdragon/processors/801
Sent from my LG-D852 using Tapatalk
D8855 V20i and iZat
Dear All,
Please note that LG D855 with V20i bumped image does not have by default the xtra_t_app.apk applied. However it has the related .so library. If xtra_t_app.apk is installed, the Enhanced Location Menu appears and it allows to turn it on/off.
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=354153062849400
This is my D855 and i dont have that option and i'm on 5.0 (20h). Can i install xtra_t_app.apk without the libxt_native.so in to my phone? thanks
saigon66 said:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=354153062849400
This is my D855 and i dont have that option and i'm on 5.0 (20h). Can i install xtra_t_app.apk without the libxt_native.so in to my phone? thanks
Click to expand...
Click to collapse
Check your:- /system/vender/lib/folder for the:- libxt_native.so file, if there go ahead, if not see Post #11......
This screen was taken after i installed the apk file. Did i miss something?
saigon66 said:
This screen was taken after i installed the apk file. Did i miss something?
Click to expand...
Click to collapse
My sister's got same blank menu with on/off slider...

[CLOSED] Goto G3 Android Development

GOTO: NebulaKernel On G3 Android Development
XDA:DevDB Information
NebulaKernel, Kernel for the T-Mobile LG G3
Contributors
Eliminater74, thewalkingdude
Source Code: https://github.com/Eliminater74/NebulaKernel/tree/nebula-mod
Kernel Special Features: Tons of Mods
Version Information
Status: Testing
Created 2015-06-26
Last Updated 2015-10-01
( Downloadz )
CLOSED
NFO:
Closed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi thanks for your work is appreciated , I have problem installing the file using TWRP it said Error executing updater binary in zip Failed any help will be appreciated.
Nice! Thanks for this!
Sent from my LG-D851 using Tapatalk
egalpr said:
Hi thanks for your work is appreciated , I have problem installing the file using TWRP it said Error executing updater binary in zip Failed any help will be appreciated.
Click to expand...
Click to collapse
Must be an error in zip, Ill fix that and Re-Upload it..
Update: Do to a problem with the Zip file, I had to Redo Zip. New one has been tested by me, And works.
Sorry for the inconvenience..
BTW: This kernel is worked on all the time, So new updates will be released alot. I already know of a few more things that I want to add.
My Goal is to make this Operate at low temps while keeping its performance as well at Longer Battery Life.
One of my test builds, The battery lasted me 3 days on a single charge. Without heavy usage.
My temps range betwen 87f /30c - and - 100f/37c (Stabilize around 97f/ 36c).
Eliminater74 said:
Reerved
Click to expand...
Click to collapse
Updater Binary failed at install... Downloaded from both links, same deal. Swapped out boot img into zip from 06/25 and it installed fine. Just a heads up. Thanks, good work. Todays update even more fun stuff!!!
Edit: I'm too slow, you already know.
zoman7663 said:
Updater Binary failed at install... Downloaded from both links, same deal. Swapped out boot img into zip from 06/25 and it installed fine. Just a heads up. Thanks, good work. Todays update even more fun stuff!!!
Edit: I'm too slow, you already know.
Click to expand...
Click to collapse
You must have gotten the zip that was bad before I replaced it with new one...........
Cause I tested the new one my self. and it worked......
@Eliminater74
Keep it up! It will get easier over time and its nice to look back and see how you have become more adept at what you are doing.
Just some friendly advice:
1. Always give proper credit
2. Always make clean commits.
1. is just because we do this for fun and for some sort of recognition (Even if some Devs won't admit it) and 2. because it makes troubleshooting, and reverting WAYYYY easier. When I started, I learned this the hard way. This way if you get into a situation where you have to make reverts or reset the branch, you are able to be more surgical about what you remove. If you have a commit that has alot going on in it then sometimes you cannot revert cleanly and it will have to be done manually. This can sometimes leave you more prone to make simple mistakes. Ones that we ALL make when Dev'ing late at night after a day of hard work and should really be getting more sleep. lol
Oh and 3. Learn to use Meld properly. This will make merging so easy, and will save you a metric crap ton of time.
If you need anything, feel free to PM me.
Regards,
Render
Anybody get a successful boot? I flashed on my existing 20e Rom and even on a fresh install of the Rom and doesnt boot. Stays on LG splash screen. Thanks.
Sent from my LG-D851 using Tapatalk
bofiana said:
Anybody get a successful boot? I flashed on my existing 20e Rom and even on a fresh install of the Rom and doesnt boot. Stays on LG splash screen. Thanks.
This Kernel is for Aosp only that is why your rom is not booting past the splash screen.
Click to expand...
Click to collapse
TheBlackMaou said:
bofiana said:
Anybody get a successful boot? I flashed on my existing 20e Rom and even on a fresh install of the Rom and doesnt boot. Stays on LG splash screen. Thanks.
This Kernel is for Aosp only that is why your rom is not booting past the splash screen.
Click to expand...
Click to collapse
Well sh!t. Guess i missed that in the op
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
bofiana said:
Anybody get a successful boot? I flashed on my existing 20e Rom and even on a fresh install of the Rom and doesnt boot. Stays on LG splash screen. Thanks.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
Yes, you you cant install over a stock rom.. its only for Custom Roms AOSP example: CM,PAC-Rom,Bliss,Resurrection Remix, Ext...
RenderBroken said:
@Eliminater74
Keep it up! It will get easier over time and its nice to look back and see how you have become more adept at what you are doing.
Just some friendly advice:
1. Always give proper credit
2. Always make clean commits.
1. is just because we do this for fun and for some sort of recognition (Even if some Devs won't admit it) and 2. because it makes troubleshooting, and reverting WAYYYY easier. When I started, I learned this the hard way. This way if you get into a situation where you have to make reverts or reset the branch, you are able to be more surgical about what you remove. If you have a commit that has alot going on in it then sometimes you cannot revert cleanly and it will have to be done manually. This can sometimes leave you more prone to make simple mistakes. Ones that we ALL make when Dev'ing late at night after a day of hard work and should really be getting more sleep. lol
Oh and 3. Learn to use Meld properly. This will make merging so easy, and will save you a metric crap ton of time.
If you need anything, feel free to PM me.
Regards,
Render
Click to expand...
Click to collapse
Wow, I would of never thought that someone like you would stop in to say anything. And very positive feedback indeed..
When I saw your name, I thought I was seeing things. I had to look twice.
But thanks man... I appreciate everything you said.. It all makes perfect sense..
It's a pity this kernel won't work with slim based roms. I really wanted to try it. Running Tesla ROM and it gets stuck on boot-up screen.
EVR_PR said:
It's a pity this kernel won't work with slim based roms. I really wanted to try it. Running Tesla ROM and it gets stuck on boot-up screen.
Click to expand...
Click to collapse
It boots on my friends Slim Rom.. This kernel is for 5.1.1.
Eliminater74 said:
It boots on my friends Slim Rom.. This kernel is for 5.1.1.
Click to expand...
Click to collapse
Apparently only the original 777kernel works with Tesla. Tesla is lollipop 5.1.1_r4. Thanks anyway.
Proof that it works with Slim based Roms.....
PS: Thats not a screen shot of my phone.. its a friends..

Pixel XL - System UI Has Stopped Working

Hello all,
I usually don't join forums and jump in to make one post pertaining to my issue but rather conduct extensive research to figure out my problem, so many apologies beforehand. However, this issue seems to be unique to me and I would to know if anyone can help me out!
After unlocking the bootloader yesterday, I rooted my Pixel XL using chainfire's systemless root method and I was ecstatic as ever! I followed the directions to the T to make sure I didn't make any mistakes, but using ADB program is familiar territory to me - everything went as expected and I successfully rooted my phone. However, I made the mistake of downloading apps that were not compatible with the systemless root, which I read could have some complications. This is where I was stumbling upon new ground, because I am not entirely familiar with "systemless root" and what the key differences are, nor what the repercussions would be for downloading apps that would look for root access in the /system partition. The two apps that I downloaded were "Magisk Manager" and "Game Guardian." On the Magisk Manager, the install data was downloaded to my phone, nothing was actually installed to the phone. As for Game Guardian, I don't think that app had compatibility with systemless root yet.
This issue where my UI would crash would persist, even after restarting my phone. I would boot the phone up to bootloader and recovery mode - just to cycle through and restart the phone regularly (since you can't wipe the cache partition), that didn't work. I tried deleting those apps and clearing their data from my phone, and that didn't work.
I made a revelation when I plugged the phone in and the persistent UI crashing stopped. I had thought that I fixed the issue, but then it continued throughout the day - up until before I posted this post. That was when I noticed that the crashing is tied with the battery status;
When I had low battery and my phone wasn't charging, my System UI would immediately crash.
When I had low battery and my phone was charging, my System UI would not crash.
When I have a decent charge (anything above what is "low battery" - 15%?), my System UI would not crash.
I did a little experiment when I was at low battery and I noticed that RIGHT BEFORE the System UI would crash, the battery icon would stay with the lightning bolt, instead of switching over to a red battery with low charge. I was unable to get a screenshot before it crashed, though. Provided, are screenshots of what my screen looked when the System UI would crash (minus the consistent pop-up) and when it was charging:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My concern right now, with my ignorance on systemless rooting and how incompatible apps could affect the phone, is that maybe the stock battery icon for when the phone is at a low charge is missing from the system file images and that is what might be causing the crashing.
Can anyone give any insight on the matter? I'll provide any information required, if need be!
Thank you in advance.
EDIT 1:
This issue is being tracked; http://forum.xda-developers.com/pixe...3490156/page11
this has been well documented in other threads. read around...
nbhadusia said:
this has been well documented in other threads. read around...
Click to expand...
Click to collapse
I understand that this a well-documented issue on other threads. However, those particular issues on those particular devices offered no remedy to the issue on my phone.
Callyvan said:
I understand that this a well-documented issue on other threads. However, those particular issues on those particular devices offered no remedy to the issue on my phone.
Click to expand...
Click to collapse
....thats because 'those' devices are the same devices as yours and theres currently no 'remedy' though CF is workin on one.... read around... its well documented for the device youre using....
http://forum.xda-developers.com/pixel-xl/development/root-supersu-t3490156/page11
Change your battery saver to 15%.
See pic below.
nbhadusia said:
....thats because 'those' devices are the same devices as yours and theres currently no 'remedy' though CF is workin on one.... read around... its well documented for the device youre using....
http://forum.xda-developers.com/pixel-xl/development/root-supersu-t3490156/page11
Click to expand...
Click to collapse
My apologies, I had thought that "read around" meant that other threads were posted, not that it was discussed in a previous thread.
Thank you for a point in the right direction.
Callyvan said:
My apologies, I had thought that "read around" meant that other threads were posted, not that it was discussed in a previous thread.
Thank you for a point in the right direction.
Click to expand...
Click to collapse
I have not experienced this problem. And some that have were using outdated ADB / SDK drivers.
One person fixed it by simply updating ADB and drivers then re-rooted and he was all set. I will try to find the link...
Correction: Chainfire did identify the issue: http://forum.xda-developers.com/showpost.php?p=69405488&postcount=143
Scott said:
I have not experienced this problem. And some that have were using outdated ADB / SDK drivers.
One person fixed it by simply updating ADB and drivers then re-rooted and he was all set. I will try to find the link...
Correction: Chainfire did identify the issue: http://forum.xda-developers.com/showpost.php?p=69405488&postcount=143
Click to expand...
Click to collapse
Thank you for that, Scott. I'll be following that main thread now.
At least it is indeed that it only happens when the battery level is low.
Callyvan said:
I understand that this a well-documented issue on other threads. However, those particular issues on those particular devices offered no remedy to the issue on my phone.
Click to expand...
Click to collapse
The current fix is to flash the stock boot.img or custom kernel and don't flash root. Im hopeful it will be fixed in next Supersu update.
Wtf
nbhadusia said:
this has been well documented in other threads. read around...
Click to expand...
Click to collapse
Who the heck are you helping even posting this stupid sentence? Not everyone is sitting at a desktop. Your post is just a big waste of time for you and everyone who reads it. Why not try to be helpful for once. I see over 200 people have viewed this post but all you can do is post how it's documented . Thanks a whole lot buddy..
ko0ky said:
Who the heck are you helping even posting this stupid sentence? Not everyone is sitting at a desktop. Your post is just a big waste of time for you and everyone who reads it. Why not try to be helpful for once. I see over 200 people have viewed this post but all you can do is post how it's documented . Thanks a whole lot buddy..
Click to expand...
Click to collapse
You're welcome. So hows that anger management course coming along 'buddy'?
nbhadusia said:
You're welcome. So hows that anger management course coming along 'buddy'?
Click to expand...
Click to collapse
Useless reply.

Why is Lineage not going to ship with root access by default?

I read on their Gerrit that they are looking to make a flashable zip for root instead of in-built. Does anyone know WHY they are doing this?
soaringowl2145 said:
I read on their Gerrit that they are looking to make a flashable zip for root instead of in-built. Does anyone know WHY they are doing this?
Click to expand...
Click to collapse
Won't it be to make sure people that really don't know what they are doing, don't install apps that could mess up their phone?
Sent from my Pixel using Tapatalk
Putridpauline said:
Won't it be to make sure people that really don't know what they are doing, don't install apps that could mess up their phone?
Sent from my Pixel using Tapatalk
Click to expand...
Click to collapse
It already has safety precautions. You are warned before you turn it on. It is off by default and you must tap your build number 7 times to enable developer options. So there is no way you could accidentally enable developer options that could mess something up.
It's because they want make rom compatible with net pay and other things.... The official builds will have a private key and it will be necessary wipe data to install....
---------- Post added at 04:37 PM ---------- Previous post was at 04:34 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
soaringowl2145 said:
I read on their Gerrit that they are looking to make a flashable zip for root instead of in-built. Does anyone know WHY they are doing this?
Click to expand...
Click to collapse
As @quintas84 states below it is for compatibility reasons.
https://review.lineageos.org/#/c/154019
I understand that after flashing the (soon to be provided) superuser zip once, the superuser will survive OTA updates.
quintas84 said:
It's because they want make rom compatible with net pay and other things.... The official builds will have a private key and it will be necessary wipe data to install....
Click to expand...
Click to collapse
Could you elaborate on that last part? Wipe data to install?
According then to avoid problems we will have to do factory reset to install the first offícial build....
Because they will sign zip with a private key to ensure integrity of the zip
soaringowl2145 said:
I read on their Gerrit that they are looking to make a flashable zip for root instead of in-built. Does anyone know WHY they are doing this?
Click to expand...
Click to collapse
My opinion is this...
Root is there but, that may be referring to when you activate the Developer Options and selecting the Root access to the App and/or the ADB.
I do believe that is what it may be referring to but, I could be wrong...
Sent from my SCH-I535 using XDA Free mobile app
Ibuprophen said:
My opinion is this...
Root is there but, that may be referring to when you activate the Developer Options and selecting the Root access to the App and/or the ADB.
I do believe that is what it may be referring to but, I could be wrong...
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
I'm currently build nightlies for my phone and in developer options no more root for apps available only disabled or ADB root....
So many of the aps I run will probably no longer work, titanium BU, Nova launcher, Buildprop editor, caldav/carddav, dSQLlitemanager Tasker probably others.
How do you disable the Google crap, for things like contacts . . .
All we have is a vague, we will provide a rooting mechanism sometime, somehow and maybe at some cost!!!
Bye-Bye the ability to configure your device your way.
zzz2002 said:
So many of the aps I run will probably no longer work, titanium BU, Nova launcher, Buildprop editor, caldav/carddav, dSQLlitemanager Tasker probably others.
How do you disable the Google crap, for things like contacts . . .
All we have is a vague, we will provide a rooting mechanism sometime, somehow and maybe at some cost!!!
Bye-Bye the ability to configure your device your way.
Click to expand...
Click to collapse
Easy to resolve. Just flash another superuser until the official LOS one comes out!
Except, if you read the announcement, they are locking the boot loader. which means that it will not be possible to install or run if the system is modified. So disabling a system app, eg. google contact sync, stops your phone from booting unless there is something that allows such mods. You will need their superuser in order to get past the system modification check at boot, third part SU apps will not be installable. (very poor explanation I know).
Locking the bootloader makes the system more acceptable/marketable as it will allow people to use the increasingly marketed pay/banking/wallet apps which insist on good security. These services are estimated to be worth Billions of dollars in fees to the service providers. Just think of the money applepay adds to Apples bottom line.
(rumor) - Another thing that some of these pay app service providers may begin to insist on is registration with a find/wipe/track my phone service. Everybody want to know where you go, who you talk to . . . particularly your government.
I personally think that using your cell phone as a super tap and go credit/debit card is a very dumb idea.
Quick question: will wiping data/locking the bootloader/etcetera be necessary for home builds? Since I have absolutely no plans to use any online banking apps or similar and have a highly customised system (I rely quite heavily on having root, but according to the other thread keeping that is as easy as setting WITH_SU=true), I'm very unhappy with these changes. I don't mind building LineageOS myself, but I want some reassurance that I won't hose my system by not wiping my data.
I can unlock bootloader in oficial Rom .... I don't believe that we can't unlock with third part rom ... If this is true we have always the option to build unofficial....
zzz2002 said:
Except, if you read the announcement, they are locking the boot loader. which means that it will not be possible to install or run if the system is modified. So disabling a system app, eg. google contact sync, stops your phone from booting unless there is something that allows such mods. You will need their superuser in order to get past the system modification check at boot, third part SU apps will not be installable. (very poor explanation I know).
Locking the bootloader makes the system more acceptable/marketable as it will allow people to use the increasingly marketed pay/banking/wallet apps which insist on good security. These services are estimated to be worth Billions of dollars in fees to the service providers. Just think of the money applepay adds to Apples bottom line.
(rumor) - Another thing that some of these pay app service providers may begin to insist on is registration with a find/wipe/track my phone service. Everybody want to know where you go, who you talk to . . . particularly your government.
I personally think that using your cell phone as a super tap and go credit/debit card is a very dumb idea.
Click to expand...
Click to collapse
Locking the bootloader? I doubt if any ROM can lock it. Can you provide a link to where you are seeing this information?
Would be nice if they offered builds with root still an option for those who are not into mobile banking... But like it makes no sense, Banks don't require rootless desktops and there is no good reason to require a rootless phone.
jhedfors said:
Locking the bootloader? I doubt if any ROM can lock it. Can you provide a link to where you are seeing this information?
Click to expand...
Click to collapse
Take a look at post #4 in this thread, and the mention of "boot loaded locked" .
How they achieve that I don't know but I suspect that if you know what you are doing then anything is possible. Maybe to install the new LineageOS ROMs you have to start by flashing a completely stock rom which would include everything that the manufacturer provided.
As I said I don't know, and your guess at how this is achieved is as good as mine.
zzz2002 said:
Take a look at post #4 in this conversation, and mention "Boot loaded locked" . How they achieve that I don't know but Isuspect that if you know what you are doing then anything is possible.
Click to expand...
Click to collapse
They are just listing off items that break apps - the ROM and bootloader are completely different things. Lineage OS,as any custom ROM depends on a custom recovery - very difficult to install if your bootloader is locked.
quintas84 said:
It's because they want make rom compatible with net pay and other things.... The official builds will have a private key and it will be necessary wipe data to install....
---------- Post added at 04:37 PM ---------- Previous post was at 04:34 PM ----------
Click to expand...
Click to collapse
Regarding the screenshot, can you tell me where that is from? You did not state the source. Thanks.
jhedfors said:
Regarding the screenshot, can you tell me where that is from? You did not state the source. Thanks.
Click to expand...
Click to collapse
I'm sorry it's from lineageos telegram group I don't know if it's official but I read this before they push changes to gerrit and github... Because of that I assume that if it's not official it's someone with great information source....
I hope root will be still available optionally in some builds...
Sent from my GT-I9505 using Tapatalk.

[ROM] [UNOFFICIAL] [6045] LineageOS 13.0 Idol3 5.5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 13.0
Big thanks to Unjustified Dev for his LineageOS device tree
LineaogeOS-13.0-UNOFFICIAL-Idol3
https://drive.google.com/drive/folders/0B57Q-f4sogZ_bUEtQ3NtWl96Njg?usp=sharing
Recommended Gapps --> OpenGapps 6.0 arm64 PICO
Bug:
- proximity sensor don't work on call UI
- USB tethering ( CM13/LOS13 issue )
Alternative way : https://forum.xda-developers.com/showpost.php?p=71290055&postcount=69
Instructions for updating:
you can dirty flash over a previous lineageos build
if you was root, you have to root again (ramdisk mod)
if you have magisk or xposed (ramdisk mod), it must be reinstalled after a boot
not necessary to reinstall gapps
Changelog:
20170304
- update blobs and configs ( unjustified dev )
- add 32bits libqti-perfd-client ( unjustified dev )
- enable doze modes, don't know if it work on msm8939 (murigny64)
- set gpu power level to 3 (200mhz) for power saving (murigny64)
20170319
- revert to doze modes msm
- revert gpu power level to 2
- security patch 2017-02
CAUTION
Don't forget to enable Privacy Guard on 1st setup wizzard​
HOWTO FIX GOOGLE SERVICE BATTERY DRAIN ​Go to "Settings" and "Privacy"
Then "Privacy Guard"
Check "enabled by default"
Go to bottom --> "Google Play services" and check padlock to "ON"
Now, you will have notification for apps witch want to access privacy
For Google Play Service, check "deny"
Enjoy !!
source:
https://github.com/LineageOS/android_device_alcatel_idol3/
https://github.com/murigny64/android_device_alcatel_idol3/
****​
es la misma rom que cyanogenmod..o has hecho modificaciones..??
wow thanks man! that was fast haha, will test ASAP
EDIT: after some testing, the rom is awesome, it is really really fast and battery it is very good too, just 1 question @murigny64, do i need to deny the access for location and contacts? or only location? or everything? besides that, this is amazing, really thanks
panchovix said:
wow thanks man! that was fast haha, will test ASAP
EDIT: after some testing, the rom is awesome, it is really really fast and battery it is very good too, just 1 question @murigny64, do i need to deny the access for location and contacts? or only location? or everything? besides that, this is amazing, really thanks
Click to expand...
Click to collapse
Deny all and test your apps. If you need to enable an authorisation, return to privacy guard and long touch google services to choose detailed access.
@murigny64 i see, anyways after deny all i have no problems so it can be done safe, i add some pictures here, magisk all good, performance really good (35k at 1920x1080 and 40k at 1280*720, it is some less than other roms there but i really prefeer lineageOS), Pogo and etc, incredible rom
i suggest to disable LiveDisplay tho, it affects a lot the performance
EDIT: and btw, the battery life is amazing, but interactive seems a little bugged, but anyways it is good
EDIT2: changed to userspace and all ****ing good, idk what is the problem with interactive tho lol
@murigny64
Awesome work, and I LOVE the ROM. I do have a couple questions though. First, can I just disable the privacy guard altogether, or do I need to enable then deny?
Secondly, I saw a post where you were mentioning lock screen issues here: https://forum.xda-developers.com/idol-3/help/6045-try-to-fix-lockscreen-security-t3435892
I'm having the EXACT same issues. My phone was lollipop, and I've not reflashed any radios. It sounds from your post that you found a file to flash to correct the issue, but I don't know what to look for, or where to find it. Can you please link the files you flashed to fix it, or a link? If it helps, I have the 6045 from cricket.
magus7091 said:
@murigny64
Awesome work, and I LOVE the ROM. I do have a couple questions though. First, can I just disable the privacy guard altogether, or do I need to enable then deny?
Secondly, I saw a post where you were mentioning lock screen issues here: https://forum.xda-developers.com/idol-3/help/6045-try-to-fix-lockscreen-security-t3435892
I'm having the EXACT same issues. My phone was lollipop, and I've not reflashed any radios. It sounds from your post that you found a file to flash to correct the issue, but I don't know what to look for, or where to find it. Can you please link the files you flashed to fix it, or a link? If it helps, I have the 6045 from cricket.
Click to expand...
Click to collapse
1 - Battery drain is a Google Service issue, try to disable all privacy and only enable for google service
2 - It's a LL modem issue. You have to flash MM modem from your country
murigny64 said:
1 - Battery drain is a Google Service issue, try to disable all privacy and only enable for google service
2 - It's a LL modem issue. You have to flash MM modem from your country
Click to expand...
Click to collapse
I'm not sure where to find that. Is there a repo somewhere?
magus7091 said:
I'm not sure where to find that. Is there a repo somewhere?
Click to expand...
Click to collapse
whare are you from ?
murigny64 said:
whare are you from ?
Click to expand...
Click to collapse
US
magus7091 said:
US
Click to expand...
Click to collapse
https://mega.nz/#F!u0UBAICD!DzKYnswfK5J6dw5WQNgEDg
take 6.0.1 US modem one
:good::good: Thanks for all your help @murigny64. Loving the ROM.
You are awesome @murigny64 gonna give this a try later today. USB tethering works, right?
Exodecim said:
You are awesome @murigny64 gonna give this a try later today. USB tethering works, right?
Click to expand...
Click to collapse
you mean give net via usb? just tested and it does not work, is like it tries to get enabled then disable it by myself
aside that, more testing and thanks to marionnete for some info, i got this score on antutu (3D at 1280*720)
panchovix said:
you mean give net via usb? just tested and it does not work, is like it tries to get enabled then disable it by myself
aside that, more testing and thanks to marionnete for some info, i got this score on antutu (3D at 1280*720)
Click to expand...
Click to collapse
Yeah I meant that, 4G net to PC. I'll have to hold off then :/ need that feature
Exodecim said:
Yeah I meant that, 4G net to PC. I'll have to hold off then :/ need that feature
Click to expand...
Click to collapse
i remember an app that let you to usb tether outside of the default option, but i can't remember
indeed is a good feature, it should be added as a bug since it is really used from some people
panchovix said:
i remember an app that let you to usb tether outside of the default option, but i can't remember
indeed is a good feature, it should be added as a bug since it is really used from some people
Click to expand...
Click to collapse
I agree. Really use it a lot, main reason why I've stuck with stock Marshmallow for so long
local
Hello. Tell there is a support of Russian in this ROM?
@murigny64
Stuck on boot when using xposed, it's known bug -_- ... Only workaround i know is to install launcher as user, not system app.
---------- Post added at 06:53 ---------- Previous post was at 06:51 ----------
Feodorus said:
Hello. Tell there is a support of Russian in this ROM?
Click to expand...
Click to collapse
Pycknn or something like that? Of course it is
MichaelGK said:
@murigny64
Stuck on boot when using xposed, it's known bug -_- ... Only workaround i know is to install launcher as user, not system app.
---------- Post added at 06:53 ---------- Previous post was at 06:51 ----------
Pycknn or something like that? Of course it is
Click to expand...
Click to collapse
Xposed v87 work fine, you have to install arm64 variant.

Categories

Resources