[q] lg optimus g f180s stuck in starting logo: Please help me - LG Optimus G (International)

HELLO BROTHERS AND FRIEND,
I AM USING LG OPTIMUS G F180S. AFTER UPDATING THE KITKAT VERSION, I WAS TRYING TO DEGRADE IT TO JELLYBEAM FOR ROOTING. AFTER COMPLETION UPGRATION, THE PHONE WAS STUCK IN LOGO MOOD. PLEASE HELP ME TO SOLVE THIS. PLEASE PLEASE PLEASE PLEASE.
pLEASE HELP ME BROTHER'S.
REGARDS IN ADVANCE AND ALWAYS.
CLICKANU

while updating again in download mode, it shows phone not found
clickanu said:
hello brothers and friend,
i am using lg optimus g f180s. After updating the kitkat version, i was trying to degrade it to jellybeam for rooting. After completion upgration, the phone was stuck in logo mood. Please help me to solve this. Please please please please.
Please help me brother's.
Regards in advance and always.
Clickanu
Click to expand...
Click to collapse
please help me
please help me

Now it shows this error (attached) while updating the file again
clickanu said:
please help me
please help me
Click to expand...
Click to collapse
help me please!!!!!!!
Help me please!!!!!
Regards

http://forum.xda-developers.com/showthread.php?t=2010624&page=49
Have you tried this method? Can you connect your phone in download mode?

Please see these attached files
clickanu said:
help me please!!!!!!!
Help me please!!!!!
Regards
Click to expand...
Click to collapse
while try to upgrading kitkat, it shows "extract file error" and after restart "the logo appears only"...see the video.
Please help me !!! Please someone help me dear (
regards..

Thanks for reply
ahmed xperia p said:
http://forum.xda-developers.com/showthread.php?t=2010624&page=49
have you tried this method? Can you connect your phone in download mode?
Click to expand...
Click to collapse
yes, i can connect the phone in download mode...
Regards,

clickanu said:
yes, i can connect the phone in download mode...
Regards,
Click to expand...
Click to collapse
Ok relax if you can connect in download mode 90% chances are your phone will be recovered.
---------- Post added at 11:46 PM ---------- Previous post was at 11:36 PM ----------
clickanu said:
yes, i can connect the phone in download mode...
Regards,
Click to expand...
Click to collapse
What kdz are you trying to flash? Broken kdz file also results in extract error, try downloading some other kdz specific to your phone model.

Please help me out
Ahmed Xperia p said:
Ok relax if you can connect in download mode 90% chances are your phone will be recovered.
Click to expand...
Click to collapse
Dear Brother,
the link you provided, i couldnt understand. I am almost new user and new in LG. Please help me out, If you tell me the steps, how to solve...then i will be very much grateful to you Brother.
Regards,

clickanu said:
Dear Brother,
the link you provided, i couldnt understand. I am almost new user and new in LG. Please help me out, If you tell me the steps, how to solve...then i will be very much grateful to you Brother.
Regards,
Click to expand...
Click to collapse
Just check first post of the given link . It's easy .
---------- Post added at 11:57 PM ---------- Previous post was at 11:52 PM ----------
what i understand is you successfully flashed jelly bean kdz but after that you are stuck in bootloop? If that is the case all you need is to wipe your phone and itll boot

how do i wipe the phone, cause there is no recovery mode found in my phone
Ahmed Xperia p said:
Just check first post of the given link . It's easy .
---------- Post added at 11:57 PM ---------- Previous post was at 11:52 PM ----------
what i understand is you successfully flashed jelly bean kdz but after that you are stuck in bootloop? If that is the case all you need is to wipe your phone and itll boot
Click to expand...
Click to collapse
I dont find any recovery mode in my phone to wipe and reboot...
and why it is not updated to kitkat through kdz, it is shown file extract error....Please help.
Sorry for bothering you.
regards and thanks.

Pleas switch off your phone. Press volume -- volume down key and press power button together. On screen display you will get option for hard reset your phone, click power button twice, then your phone will boot after 5 to 10 seconds after a hard reset..

clickanu said:
I dont find any recovery mode in my phone to wipe and reboot...
and why it is not updated to kitkat through kdz, it is shown file extract error....Please help.
Sorry for bothering you.
regards and thanks.
Click to expand...
Click to collapse
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Follow this procedure and download wipe batch file from here http://www.mediafire.com/?ru7erfxsz7p7s3p
All credit goes to @potatohead for his useful thread
---------- Post added at 12:22 AM ---------- Previous post was at 12:19 AM ----------
cooljay5 said:
Pleas switch off your phone. Press volume -- volume down key and press power button together. On screen display you will get option for hard reset your phone, click power button twice, then your phone will boot after 5 to 10 seconds after a hard reset..
Click to expand...
Click to collapse
This is the most easiest way to fix .
Ahmed Xperia p said:
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Follow this procedure and download wipe batch file from here http://www.mediafire.com/?ru7erfxsz7p7s3p
All credit goes to @potatohead for his useful thread
Click to expand...
Click to collapse
Extract file error could be because of a broken kdz or once a kdz larger than 1 gb is flashed using kdz updater it also gives this error

Thanks Seniors...Grateful....to You
Ahmed Xperia p said:
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Follow this procedure and download wipe batch file from here http://www.mediafire.com/?ru7erfxsz7p7s3p
All credit goes to @potatohead for his useful thread
---------- Post added at 12:22 AM ---------- Previous post was at 12:19 AM ----------
This is the most easiest way to fix .
Extract file error could be because of a broken kdz or once a kdz larger than 1 gb is flashed using kdz updater it also gives this error
Click to expand...
Click to collapse
Another thing, now my phone doesnt show any IMEI no, and please suggest me how do i get it and how do i update the kitkat version now...can i root the phone after updating the kitkat or now?
Please suggest...You are just Great
Regards and Thanks,

clickanu said:
Another thing, now my phone doesnt show any IMEI no, and please suggest me how do i get it and how do i update the kitkat version now...can i root the phone after updating the kitkat or now?
Please suggest...You are just Great
Regards and Thanks,
Click to expand...
Click to collapse
No IMEI means you need to restore EFS backup ,which i doubt you did not make

I didnt know anything about EFS backup....!!! Is there anything wrong with my phone.!
Ahmed Xperia p said:
No IMEI means you need to restore EFS backup ,which i doubt you did not make
Click to expand...
Click to collapse
I dont know anything about EFS??? Please let me know and help me out Brother, You are the boss. How do i get it back? How do i remove the korean system softwares. Please help me out....Regards

signal working fine and phone recognizes sim card ? Check if imei is shown without sim ? Currently you're on which firmware and what firmware you flashed earlir?
Sent from my LG-E975 using XDA Premium 4 mobile app

Thanks Senior for your patience to reply....
Ahmed Xperia p said:
signal working fine and phone recognizes sim card ? Check if imei is shown without sim ? Currently you're on which firmware and what firmware you flashed earlir?
Sent from my LG-E975 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yees, Signal working fine and phone recognizes the sim card.
IMEI not shown without sim Dear Brother. Currently I am on version 4.1.2, jellybean,
I flashed with jellybeam F180S20d_00.kdz.
Please suggest me and help me out
Thanks and regards,

clickanu said:
Yees, Signal working fine and phone recognizes the sim card.
IMEI not shown without sim Dear Brother. Currently I am on version 4.1.2, jellybean,
I flashed with jellybeam F180S20d_00.kdz.
Please suggest me and help me out
Thanks and regards,
Click to expand...
Click to collapse
Another interesting thing is that, in my phone it is shown F180S but when i connect it to computer via usb, the LG support tool software shows it LGV500.
What about the matter Brother???
Thanks and Regards

If you've lost your imei without making EFS backup , you've lost it forever. There's no fix for this i guess. Best bet for you is use your phone as it is.
Sent from my LG-E975 using XDA Premium 4 mobile app
---------- Post added at 02:06 AM ---------- Previous post was at 02:05 AM ----------
You can try flashing stock kdz for your modle, it may help you but nit guaranteed.
Sent from my LG-E975 using XDA Premium 4 mobile app

Can i root my phone now or after updating to kitkat?

Related

Pls HELP - I broke my phone..

First sorry for bad english, but I realy need help (( So I try to root my phone, but in CWM i wipe everythig, and when I restart the phone it show me this: http://prikachi.com/images/878/6816878a.jpg
Here my only option is to log on CWM, as pressed power button. However, how to install something from CWM after I have wipe everything on the phone (
So I found this http://forum.xda-developers.com/showthread.php?t=2010624 , and do what he say - step by step. But when I finished the installation, the phone looks like this: http://prikachi.com/images/789/6817789c.jpg
A computer gives this error: http://prikachi.com/images/790/6817790K.jpg
When I reboot the phone again looks like this:
http://prikachi.com/images/878/6816878a.jpg
Pls tell me what to do? (
After rebooting, press volume up and wait for 5 secs... after that, power off your phone(hold and keep pressing the power button for 15 to 20 secs) till your phone completely powers off... then switch it on as normal(press and hold the power button untill you see the LG logo). It happened for me also once and this is how, I solved it....Hope this helps....
cooljay5 said:
After rebooting, press volume up and wait for 5 secs... after that, power off your phone(hold and keep pressing the power button for 15 to 20 secs) till your phone completely powers off... then switch it on as normal(press and hold the power button untill you see the LG logo). It happened for me also once and this is how, I solved it....Hope this helps....
Click to expand...
Click to collapse
not help
nexus bootloader will be an issue to go back to stock.
safest bet is learn adb
after that from cwm use
adb push romname.zip /sdcard/0/
wait and you will have file on your phone.
Im not sure its issue with nexus bootloader... Try to load rom thro adb sideload.. If that doesn't help then use lg support tool...!!
Sent from my LG-E975 powering Stock 4.1.2
So many people having this issue.. U think it is nexus bootloader problem??? I also see u have the kdz updater and not the lg flashtool? Maybe it's not the bootloader maybe it's the app for flashing kdz??
Sent from my Optimus G using Tapatalk
davevinci said:
So many people having this issue.. U think it is nexus bootloader problem??? I also see u have the kdz updater and not the lg flashtool? Maybe it's not the bootloader maybe it's the app for flashing kdz??
Sent from my Optimus G using Tapatalk
Click to expand...
Click to collapse
Ok, maybe you're right.
Pls give me link to working lg flashtool.
Аnd in each case pls give me link to adb sideload.
10x!!!
weekend coming ill confirm you guys that it is when you had nexus bootloader that you cant go back stock without hickups!
Now the battery is gone. The phone does not respond at all and doesn't want to charge the battery, what to do??? (((
zepir said:
Now the battery is gone. The phone does not respond at all and doesn't want to charge the battery, what to do??? (((
Click to expand...
Click to collapse
What are u doing with ur phone???
Sent from my Optimus G using Tapatalk
---------- Post added at 05:52 AM ---------- Previous post was at 05:50 AM ----------
I think it wont charge because u dont have a working kernel in it???
Sent from my Optimus G using Tapatalk
Ok, the phone is in download mode again. Can I try to flash with Odin3? And what are the settings? What file to use for flash with Odin3?
zepir said:
Ok, the phone is in download mode again. Can I try to flash with Odin3? And what are the settings? What file to use for flash with Odin3?
Click to expand...
Click to collapse
odin, this is not samsung we are using buddy
atifsh said:
weekend coming ill confirm you guys that it is when you had nexus bootloader that you cant go back stock without hickups!
Click to expand...
Click to collapse
here you go i can confirm ... this is on f180 flashed and working as e975
1: new freegee does flashes nexus bootloader
2: after using freegee, cant boot to existing OS only way is to flash custom / cm roms
3: using kdz updater actually do revert to bootloader and to fix that is to unplug----- poweroff phone ---- press both volume keys + plugin (aka download mode)... flash will now resume and finishes without any further issues
4: using older version of freegee still works and doesnt have these issues... im proving my saved version 1.2.2.

[Q] one hell of a brick :(

power button is broken.
Flashed an odin stock (tried multiple) and I m still getting stuck on samsung logo
with no power button, I cant get to recovery to wipe/reset
any ideas boys?
ordered the replacement power switch but it's a long wait for it to reach me. I not in the US currently
nabilbek said:
power button is broken.
Flashed an odin stock (tried multiple) and I m still getting stuck on samsung logo
with no power button, I cant get to recovery to wipe/reset
any ideas boys?
ordered the replacement power switch but it's a long wait for it to reach me. I not in the US currently
Click to expand...
Click to collapse
http://youtu.be/pqBgbN8NLjI
sounds crazy , but i did this to my sons t989 a year ago and still working-might be worth a try
Fasted12 said:
http://youtu.be/pqBgbN8NLjI
sounds crazy , but i did this to my sons t989 a year ago and still working-might be worth a try
Click to expand...
Click to collapse
tried a lot man
the button seems completely dead
nabilbek said:
tried a lot man
the button seems completely dead
Click to expand...
Click to collapse
you know, unless you have a touch recovery , getting there wont help with a bad power button
Fasted12 said:
you know, unless you have a touch recovery , getting there wont help with a bad power button
Click to expand...
Click to collapse
yep ... using latest twrp
but I dont think there is a way into recovery if you are unable to boot the phone and no power button
I need something like a odin flashable tar that wipes cache /resets (because this usually fixes the stuck on logo)
nabilbek said:
yep ... using latest twrp
but I dont think there is a way into recovery if you are unable to boot the phone and no power button
I need something like a odin flashable tar that wipes cache /resets (because this usually fixes the stuck on logo)
Click to expand...
Click to collapse
flashing anything with a fluky power button is very hazardous. If it goes off in the middle of something, your device could be toast.
I'd get it fixed before doing anything. if it can't be fixed....phone shopping time! [emoji106]
KJ said:
flashing anything with a fluky power button is very hazardous. If it goes off in the middle of something, your device could be toast.
I'd get it fixed before doing anything. if it can't be fixed....phone shopping time! [emoji106]
Click to expand...
Click to collapse
I ordered a new power switch but I am bad at waiting
nabilbek said:
I ordered a new power switch but I am bad at waiting
Click to expand...
Click to collapse
You're risking your phone flashing anything.
But its yours to do with as you wish. Just would suck to finally get that power button delivered....and not have a functioning phone to use it with.
nabilbek said:
I ordered a new power switch but I am bad at waiting
Click to expand...
Click to collapse
you could try installing adb http://forum.xda-developers.com/showthread.php?t=1853159
Fasted12 said:
you could try installing adb http://forum.xda-developers.com/showthread.php?t=1853159
Click to expand...
Click to collapse
I am aware and have adb. thing is phone is bricked after last update (stuck at logo)
so i can only get into download mode ....wish there was a way to get from download to recovery but I cant find any
without the use of the power button ofc ...
nabilbek said:
I am aware and have adb. thing is phone is bricked after last update (stuck at logo)
so i can only get into download mode ....wish there was a way to get from download to recovery but I cant find any
without the use of the power button ofc ...
Click to expand...
Click to collapse
sorry man, hope the button install goes well
hmm
Fasted12 said:
sorry man, hope the button install goes well
Click to expand...
Click to collapse
i have the same exact problem minus my power button, it works normal
and i get firmware upgrade encountered an issue
i get that screen when i normal boot it, try recovery, or download mode, everything results to firmware upgrade encountered an issue
not sure if i should post here with this or not, just letting you know
ovenbird said:
i have the same exact problem minus my power button, it works normal
and i get firmware upgrade encountered an issue
i get that screen when i normal boot it, try recovery, or download mode, everything results to firmware upgrade encountered an issue
not sure if i should post here with this or not, just letting you know
Click to expand...
Click to collapse
i guess the question is, can you get your phone to download mode...
download mode
Fasted12 said:
i guess the question is, can you get your phone to download mode...
Click to expand...
Click to collapse
it reaches download mode no matter what i do ( the firmware error is in the download mode )
the problem is while in download mode nothing recognizes it ( its not normal download mode )
Im getting this :
I cant post links but this is the image i can send you
cdn.droidviews.com/wp-content/uploads/2013/09/Firmware-upgrade-encountered-an-issue jpg
put a DOT in there
ovenbird said:
it reaches download mode no matter what i do ( the firmware error is in the download mode )
the problem is while in download mode nothing recognizes it ( its not normal download mode )
Im getting this :
I cant post links but this is the image i can send you
cdn.droidviews.com/wp-content/uploads/2013/09/Firmware-upgrade-encountered-an-issue jpg
put a DOT in there
Click to expand...
Click to collapse
if kies wont recognize, nor will odin-i dont know--try reposting maybe get some new views, sorry
ovenbird said:
i have the same exact problem minus my power button, it works normal
and i get firmware upgrade encountered an issue
i get that screen when i normal boot it, try recovery, or download mode, everything results to firmware upgrade encountered an issue
not sure if i should post here with this or not, just letting you know
Click to expand...
Click to collapse
this happened with me once. long long time ago
But I swear I cant remember why
here try this : https://www.youtube.com/watch?v=GbAJH_mL6N4
another well explained guide for solving using kies : http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
In case anyone doesn't know.....Odin won't see your device if kies is running. You need to kill the kies process. Make sure there's no mention of it in windows task manager.
Then, if your drivers are installed right....Odin should see your phone.
Also, I've always had the best luck with Odin 3.04.
---------- Post added at 07:31 PM ---------- Previous post was at 07:30 PM ----------
Or uninstall kies... I never once used it for anything.
KJ said:
In case anyone doesn't know.....Odin won't see your device if kies is running. You need to kill the kies process. Make sure there's no mention of it in windows task manager.
Then, if your drivers are installed right....Odin should see your phone.
Also, I've always had the best luck with Odin 3.04.
---------- Post added at 07:31 PM ---------- Previous post was at 07:30 PM ----------
Or uninstall kies... I never once used it for anything.
Click to expand...
Click to collapse
exactly ... kies is utter ****!
I would never recommend it too. A pure waste of time
Also, see what your phone shows as in windows device manager. If its listed with an "!" on it....the drivers may need to be reinstalled. If windows doesn't see it correctly, either will Odin. ?
Problem solved, I reinstalled drivers.
That simple.
Thanks for the video btw, I even added the guy from youtube channel

Please help me! I want to go back to the stock rom but it won't let me :(

I tried to install a custom rom from here : http://forum.xda-developers.com/opt.../vupmp-g-pro-sg3-v3-0-final-lg-g-pro-t2867783
But now I am stuck in a boot loop i think ( it won't do anything but showing me the lg sign )
I tried downloading the kdz file but there isn't 1 site for the Dutch one @ NLD/Netherlands (tbh there is but all the links are down)
I can't boot into the cwm either and I also can't do hard reset...
Can anyone tell me what to do?
Having the same issue
someone please help
The answer
Ericrsmssn said:
Having the same issue
someone please help
Click to expand...
Click to collapse
I found a sollution for this.
Download LG Mobile Support tool ( http://lg-support-tool.en.lo4d.com/ )
Put your phone in download mode "Hold the VolumeUP + VolumeDOWN Button and plug in the usb cable from your device to your pc [DON'T PRESS THE POWER BUTTON], let it install the drivers. ( To be sure it found you'r drivers, you should press on : Install Drivers
Once you installed your driver of the e98x ( mine is e986 ) Press on Extra functions - Upgrade-error recovery.
Make sure it found your device and make sure you are connected to the internet "IT WONT WORK WITHOUT INTERNET CONNECTION"
Launch it and it will reset your phone to new ( it did for me )
Don't get mad if you lose you're data T_T this worked for me so it should work for you to
bagslayer said:
I found a sollution for this.
Download LG Mobile Support tool ( http://lg-support-tool.en.lo4d.com/ )
Put your phone in download mode "Hold the VolumeUP + VolumeDOWN Button and plug in the usb cable from your device to your pc [DON'T PRESS THE POWER BUTTON], let it install the drivers. ( To be sure it found you'r drivers, you should press on : Install Drivers
Once you installed your driver of the e98x ( mine is e986 ) Press on Extra functions - Upgrade-error recovery.
Make sure it found your device and make sure you are connected to the internet "IT WONT WORK WITHOUT INTERNET CONNECTION"
Launch it and it will reset your phone to new ( it did for me )
Don't get mad if you lose you're data T_T this worked for me so it should work for you to
Click to expand...
Click to collapse
Nope, aint working since it says that my battery isn't fully charged. but i even tried the battery of a friend of mine and it says the same..
are you able to enter into the recovery by pressing pOWER + VOLUME UP ? the device must be turned off and to be sure, pull battery and charging cable off and put battery back to do the pressing combo.
bagslayer said:
I found a sollution for this.
Download LG Mobile Support tool ( http://lg-support-tool.en.lo4d.com/ )
Put your phone in download mode "Hold the VolumeUP + VolumeDOWN Button and plug in the usb cable from your device to your pc [DON'T PRESS THE POWER BUTTON], let it install the drivers. ( To be sure it found you'r drivers, you should press on : Install Drivers
Once you installed your driver of the e98x ( mine is e986 ) Press on Extra functions - Upgrade-error recovery.
Make sure it found your device and make sure you are connected to the internet "IT WONT WORK WITHOUT INTERNET CONNECTION"
Launch it and it will reset your phone to new ( it did for me )
Don't get mad if you lose you're data T_T this worked for me so it should work for you to
Click to expand...
Click to collapse
fosunite said:
are you able to enter into the recovery by pressing pOWER + VOLUME UP ? the device must be turned off and to be sure, pull battery and charging cable off and put battery back to do the pressing combo.
Click to expand...
Click to collapse
I did that.. but no luck :S I am able to get into recovery mode but it keeps saying my battery is to empty
bagslayer said:
I tried to install a custom rom from here : http://forum.xda-developers.com/opt.../vupmp-g-pro-sg3-v3-0-final-lg-g-pro-t2867783
But now I am stuck in a boot loop i think ( it won't do anything but showing me the lg sign )
I tried downloading the kdz file but there isn't 1 site for the Dutch one @ NLD/Netherlands (tbh there is but all the links are down)
I can't boot into the cwm either and I also can't do hard reset...
Can anyone tell me what to do?
Click to expand...
Click to collapse
you told that u cannot boot into cwm which sounds pretty serious...
bagslayer said:
I did that.. but no luck :S I am able to get into recovery mode but it keeps saying my battery is to empty
Click to expand...
Click to collapse
how do you get into the recovery mode?
please do not mistake cwm and recovery mode, because cwm is your recovery mode.
so please tell what steps you were using so that we can help you
Sent from my LG-E980 using XDA Free mobile app
well, I tried powering off the phone----holding volume DOWN+UP and plugging the usb into my lg.
I also tried that while I took out my entire battery but the same results
Ehm guys, I would like to know how to get my phone back to the stock image. I am still stuck on the error which says my battery is empty when I try to restore it but I quess it is because my phone thinks it is en E980 while it is an e986
Or it is because I flashed Madmacks kernel or smthing. Any solutions? :C I just wanna go back to the stock image D:
bagslayer said:
Ehm guys, I would like to know how to get my phone back to the stock image. I am still stuck on the error which says my battery is empty when I try to restore it but I quess it is because my phone thinks it is en E980 while it is an e986
Or it is because I flashed Madmacks kernel or smthing. Any solutions? :C I just wanna go back to the stock image D:
Click to expand...
Click to collapse
1. connect ur phn to ur pc and install flashtool from step 4.
2.install drivers of ur mbl
3.download the kdz firmware file u want from here http://www.lg-phone-firmware.com/index.php?id_mod=25
4.now follow the steps provided in the thread http://forum.xda-developers.com/show....php?t=2797190
5.its better to choose cse flash as i did that(when i chosen normal flash,the update stopped saying some error.so disconneted my net connection and tried again.it worked)
6.if u follow the above steps correctly,ull get ur phn back within 6 minutes.
(sorry for my english) and please let me know if ur phn is back.
hope this will help..
krishna13 said:
1. connect ur phn to ur pc and install flashtool from step 4.
2.install drivers of ur mbl
3.download the kdz firmware file u want from here http://www.lg-phone-firmware.com/index.php?id_mod=25
4.now follow the steps provided in the thread http://forum.xda-developers.com/show....php?t=2797190
5.its better to choose cse flash as i did that(when i chosen normal flash,the update stopped saying some error.so disconneted my net connection and tried again.it worked)
6.if u follow the above steps correctly,ull get ur phn back within 6 minutes.
(sorry for my english) and please let me know if ur phn is back.
hope this will help..
Click to expand...
Click to collapse
The link of Part 4 isn't working :C
could you upload a new link?
RTS on GPro
XDA already has a nice thread for doing a Return to Stock that I have used more than once and has worked every time.
http://forum.xda-developers.com/showthread.php?t=2302660
geekboy01 said:
XDA already has a nice thread for doing a Return to Stock that I have used more than once and has worked every time.
http://forum.xda-developers.com/showthread.php?t=2302660
Click to expand...
Click to collapse
that is for the E980, will it work for the E986 to?
bagslayer said:
that is for the E980, will it work for the E986 to?
Click to expand...
Click to collapse
Unfortunately I don't have the 986 and didn't catch that was your specific model. If you're in a bricked mode already and have access to your original FW then its worth a shot for recovery. YMMV
geekboy01 said:
XDA already has a nice thread for doing a Return to Stock that I have used more than once and has worked every time.
http://forum.xda-developers.com/showthread.php?t=2302660
Click to expand...
Click to collapse
geekboy01 said:
Unfortunately I don't have the 986 and didn't catch that was your specific model. If you're in a bricked mode already and have access to your original FW then its worth a shot for recovery. YMMV
Click to expand...
Click to collapse
Mine is not bricked yet D: I'm scared ;-;
bagslayer said:
The link of Part 4 isn't working :C
could you upload a new link?
Click to expand...
Click to collapse
so sorry for my late rply.
regarding instructions of step 4 follow this link. http://forum.xda-developers.com/showthread.php?t=2432476
but dwnld the kdz for ur lg g pro.
that guide on the link these guys have provided above should work for all the G Pro variants, just download the kdz file for your specific model. try this link http://www.lg-phone-firmware.com/index.php
be patient and have time reading, everything you need is on this forum
---------- Post added at 05:10 PM ---------- Previous post was at 04:59 PM ----------
also try this http://forum.xda-developers.com/showthread.php?t=2420219
follow the first guide "KDZ Flashing Method"
make sure you have your internet connection disabled when you start LG Flash Tool and that you are using Windows 7, i dont know if it will work on windows 8, but im sure it wont work on winXP.

Please help on soft brick after flashing miui!

Please help.. My device is Desire 820s (D820ts) dual sim. After i've flashed the MIUI. my device cant boot, and its suck on recovery mode. I have try using SP Tools to reflash the stock rom, but somehow the SP Tools didnt start downloading. Driver was installed correctly, and it is detecting my device. But i dont know why it is not start downloading. Please help me. Is there is any other way to solve my problem?
6
joehanh88 said:
Please help.. My device is Desire 820s (D820ts) dual sim. After i've flashed the MIUI. my device cant boot, and its suck on recovery mode. I have try using SP Tools to reflash the stock rom, but somehow the SP Tools didnt start downloading. Driver was installed correctly, and it is detecting my device. But i dont know why it is not start downloading. Please help me. Is there is any other way to solve my problem?
Click to expand...
Click to collapse
Do so at the same time to connect your phone to your computer and click the tab to download SP_Flash_Tool.sdelay it several times, to begin the download
vuk1963 said:
Do so at the same time to connect your phone to your computer and click the tab to download SP_Flash_Tool.sdelay it several times, to begin the download
Click to expand...
Click to collapse
i have done enough in waiting. but it didnt flash. my device straightly go to the charging mode after i connect my device to the computer.
Tighten all 2 volume buttons and the power button at the same time and do not let up download
---------- Post added at 02:32 PM ---------- Previous post was at 02:24 PM ----------
More hold the volume down key and the power button to enter download mode, press the power button to enter that mode by loading usb
joehanh88 said:
I have try using SP Tools to reflash the stock rom, but somehow the SP Tools didnt start downloading. Driver was installed correctly, and it is detecting my device. But i dont know why it is not start downloading. Please help me. Is there is any other way to solve my problem?
Click to expand...
Click to collapse
Power off your phone completely. Then click on 'download' on Flashtool. Connect USB to your phone first, Then holding volume down button connect the other end of usb to your pc. This always works for me.

Unable to enter recovery mode. USB icon is coming up

Dear folks, since yesterday i was not able to enter recovery mode. If i press vol up+ power then i can see a small USB icon with a white bar below that. After which nothing is happening. Powen button when pressed continously for 5sec will turn off my mobile and mobile starts again. Mobile is working perfectly. Only issue is unable to enter recovery mode. Can some one help please.....................
have you tried > http://www.asus-zenfone.com/2015/03/zenfone-2-how-to-enter-recovery-wipe.html ?
need to follow this exactly.. finger dance can be tricky but it will work...
I am aware of that bro.i tried many times.i was on custom rom earlier too. Now this us the first time i am seeing this USB icon with white bar below it. Phone is not entering recovery mode.
are u trying to restore ?
Pu$$nBooT$ said:
are u trying to restore ?
Click to expand...
Click to collapse
I am trying to reinstall the latest Global file using ADB
http://www.asus-zenfone.com/2015/12/how-to-downgrade-asus-zenfone-2-firmware.html
try this, ^^^
i followed this method to fix my issue
Try to flash the recovery again.
Pu$$nBooT$ said:
http://www.asus-zenfone.com/2015/12/how-to-downgrade-asus-zenfone-2-firmware.html
try this, ^^^
i followed this method to fix my issue
Click to expand...
Click to collapse
Bro you are not understanding. If the mobile is able to enter recovery mode then i can do all those things, mobile itself is not entering recovery mode. so there is no point in flashing usinng ADB
Using that link you can fix issues ... need to follow it to the letter.. called reading...
---------- Post added at 09:33 AM ---------- Previous post was at 09:30 AM ----------
Follow the guide like it says. You will fix the issues and dont plug the phone in a usb3 port, always use 2.0
Pu$$nBooT$ said:
Using that link you can fix issues ... need to follow it to the letter.. called reading...
---------- Post added at 09:33 AM ---------- Previous post was at 09:30 AM ----------
Follow the guide like it says. You will fix the issues and dont plug the phone in a usb3 port, always use 2.0
Click to expand...
Click to collapse
Downloaded UL-Z00A-WW-2.20.40.174-user.zip and renamed the file to UL-Z00A-WW-2.20.40.178-user.zip.
Copied the file and pasted into internal memory. System recognized the update file and asked me to update. Updated and mobile started normally. Now everything working fine, i was able enter recovery mode.
Hope this helps someone who encounters such type of issue,

Categories

Resources