Universal Waterproof Case - Nexus 5 Accessories

This just came in the mail today from amazon.
http://www.amazon.com/Universal-Wat...8&qid=1402547153&sr=8-3&keywords=dryphonecase
http://www.dryphonecase.com/
This case is supposedly from Italy. The case is a very sturdy plastic that has a gel membrane that covers the screen side of case. It fits most smartphones. The membrane is the only thing that makes me nervous about the case. The case has a great seal around the edges of the case. The top if the case has a lock that keeps the case together. It also came with a lanyard.
I also did a water submerge test for 30 minutes. Nothing leaked. Supposedly it can take quite the fall.
Please let me know if you all have questions or comments about the case or my review.
Edit: The case worked great on my 75 mile bike trip. It survived a rain storm and a fall, but the fall cracked that case. But the phone survived the 7 foot fall. The case is great for water things but not dropping I found out.

Do this guys ship to India and reviews please
Sent from my Nexus 5 using Tapatalk

So when it's in the case how do you press the power button?

s_special said:
So when it's in the case how do you press the power button?
Click to expand...
Click to collapse
Sorry for the late response. I was on vacation. You have to open up the case to do that sadly.

Bruce Lee said:
You have to open up the case to do that sadly.
Click to expand...
Click to collapse
ahaha, nice case for masochists. :laugh::good:
thanks for review.

Thank you for posting this. Good to know more about this option.How is there still no waterproof case out there!?
Sent from my Nexus 5 using XDA Free mobile app

Here is a less expensive alternative, however it may not be good for falls/drops
http://goo.gl/OCo36G

This is the best case IMHO, cheaper than OPs and goes 100 ft deep http://www.amazon.com/Universal-Wat...?ie=UTF8&qid=1426182455&sr=8-1&keywords=frieq

Thank you for posting this.

Power Button
You can not press power when the phone is in the case, correct?
If not, I don't see how this is any better than a plastic bag.
UPDATE:
Bought the case...
•*I installed ElementalX kernel and enabled DT2W in order to turn the screen on while the phone is in the waterproof housing.
• The touchscreen will not respond when submerged underwater. (I suspected as much.) This is a limitation of the hardware, not a case issue. Case comes with a sleeve that would theoretically allow the stouchscreen to work by providing some space between the screen protector and the screen itself but it seems to damage teh cover itself and might cause it to leak. (my unsubstantiated opinion)
•*Comes in a really bad cardboard box that hails it's material and integrity from the 1960's.

Related

Video Review: SGP Ultra Thin Air case!!

Hi Guys,
Got my hands on the SGP Ultra Thin Air case, a thin snap-on style case that won't add much bulk/weight to your phone and is for those users that like to keep their devices slim. You can watch the full review below:
Capsule series is much better. No top and bottom part is big failure.
Ploone said:
Hi Guys,
Got my hands on the SGP Ultra Thin Air case, a thin snap-on style case that won't add much bulk/weight to your phone and is for those users that like to keep their devices slim. You can watch the full review below:
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
Looks similar to the $3 case from ebay, is sgp just repackaging these cases?
Look poor with finger prints.
All snap on style cases will look similar, cutouts are a little different and the Ultra Thin features a soft touch back.
Sent from my Nexus S using XDA App
I have the Thin Air case as well, along with the Glas, both are excellent products, thought a bit overpriced.
The Thin Air is a quality case, I am currently in Hong Kong, so I've tried on all the generic cases at the electronic malls as well. The cheap generic ones doesn't fit the best, there is always a creak or slight warp on the sides of the case that compresses as you squeeze the sides, which to me is annoying. The "better" branded ones are on par with the SGP, but the price is also similar to SGP, I rather buy from a well known brand.
I've had two cheap generic ones before I bought the case mate barely there and the SGP Thin Air, both cheap cases broke a few days after when I took the case on and off.
The Thin Air does leave finger prints, but I don't care too much since it is only the back, and it can be wiped away. The most important part for me is a super thin case with minimal protection that doesn't break easily. So far (fingers crossed), SGP has done it.
chiefroastbeef said:
I have the Thin Air case as well, along with the Glas, both are excellent products, thought a bit overpriced.
The Thin Air is a quality case, I am currently in Hong Kong, so I've tried on all the generic cases at the electronic malls as well. The cheap generic ones doesn't fit the best, there is always a creak or slight warp on the sides of the case that compresses as you squeeze the sides, which to me is annoying. The "better" branded ones are on par with the SGP, but the price is also similar to SGP, I rather buy from a well known brand.
I've had two cheap generic ones before I bought the case mate barely there and the SGP Thin Air, both cheap cases broke a few days after when I took the case on and off.
The Thin Air does leave finger prints, but I don't care too much since it is only the back, and it can be wiped away. The most important part for me is a super thin case with minimal protection that doesn't break easily. So far (fingers crossed), SGP has done it.
Click to expand...
Click to collapse
Thanks for sharing, I agree with most of what you have to say, however I feel the case itself just isn't for me. SGP however has been releasing some quality products for the GS2 (as expected) - and I'm excited for what they are bringing next.
Ploone said:
Thanks for sharing, I agree with most of what you have to say, however I feel the case itself just isn't for me. SGP however has been releasing some quality products for the GS2 (as expected) - and I'm excited for what they are bringing next.
Click to expand...
Click to collapse
I agree, this case isn't for most people, since the normal person that wants a case would want more protection than what the Thin Air has to offer, plus like your video mentioned, there is no top and bottom coverage. But out of the cases I have, I like this the most, the black color blends in with the phone.
Thank you for the review videos, you are doing a great job, very clear voice, smooth presentation, no "umms" or "uhhs," or any tongue smacking. Keep it up! It is because of you that I bought the Glas, which I love!
chiefroastbeef said:
I agree, this case isn't for most people, since the normal person that wants a case would want more protection than what the Thin Air has to offer, plus like your video mentioned, there is no top and bottom coverage. But out of the cases I have, I like this the most, the black color blends in with the phone.
Thank you for the review videos, you are doing a great job, very clear voice, smooth presentation, no "umms" or "uhhs," or any tongue smacking. Keep it up! It is because of you that I bought the Glas, which I love!
Click to expand...
Click to collapse
Thanks so much I enjoy doing it and I have a lot more content coming up!
Try to get your hands on one of these http://www.ebay.co.uk/itm/SAMSUNG-G...897177?pt=PDA_Accessories&hash=item3f0bae1319 !
I'm awaiting mine, but surely people would be interested.
Sent from my GT-I9100
I was really excited for this case due to it's look and how minimal it is, but after just 3 days I need to stop using it.
The stickers you place along the sides are constantly moving. They slide up and out of the case somehow, so you need to slide them back down, which leaves a trail of sticky residue.
Also, there is one spot on the back my phone just above the battery
cover that is now damaged due to the case rubbing against it. There are scratches and an area where the color has rubbed off.
My phone is in worse condition after a few days in this case than from a week without any case.
Sent from my GT-I9100 using XDA Premium App
tietherope said:
I was really excited for this case due to it's look and how minimal it is, but after just 3 days I need to stop using it.
The stickers you place along the sides are constantly moving. They slide up and out of the case somehow, so you need to slide them back down, which leaves a trail of sticky residue.
Also, there is one spot on the back my phone just above the battery
cover that is now damaged due to the case rubbing against it. There are scratches and an area where the color has rubbed off.
My phone is in worse condition after a few days in this case than from a week without any case.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Really? That doesn't bode well at all. Did you check authenticity of the case with the serial number at their site?
Sent from my GT-I9100
m0rtiis said:
Really? That doesn't bode well at all. Did you check authenticity of the case with the serial number at their site?
Sent from my GT-I9100
Click to expand...
Click to collapse
I did not, but it was bought directly through their site, not a 3rd party.
Don't get me wrong, the case is beautiful and the damaged area is a lot smaller than the damaged area would be if you were to drop it on concrete without this case. I just want to let others know that this happens as others could be even more OCD about their phone condition than I am. SGP knows the inside of this case scratches your phone, that's why they include the stickers. Unfortunately this one spot was missed, either due to oversight, or it is too small of a location to place a sticker.
I had the Captivate before this phone using a Body Glove case. While it is the best case I have ever used on a phone, it also scratched up the top and bottom of my phone pretty bad. It's a pretty common thing with the harder cases.
tietherope said:
I did not, but it was bought directly through their site, not a 3rd party.
Don't get me wrong, the case is beautiful and the damaged area is a lot smaller than the damaged area would be if you were to drop it on concrete without this case. I just want to let others know that this happens as others could be even more OCD about their phone condition than I am. SGP knows the inside of this case scratches your phone, that's why they include the stickers. Unfortunately this one spot was missed, either due to oversight, or it is too small of a location to place a sticker.
Click to expand...
Click to collapse
I see. I'm awaiting one of these as we type, do you have pictures of the scratches so I can avoid them with stickers?
Sent from my GT-I9100
m0rtiis said:
I see. I'm awaiting one of these as we type, do you have pictures of the scratches so I can avoid them with stickers?
Sent from my GT-I9100
Click to expand...
Click to collapse
Yeah, definitely. Just give me a little while and I will get you a picture of either the scratches or at least the part of the case causing it. Whichever will show up on camera first.
tietherope said:
Yeah, definitely. Just give me a little while and I will get you a picture of either the scratches or at least the part of the case causing it. Whichever will show up on camera first.
Click to expand...
Click to collapse
Trouble with the camera?
Sent from my GT-I9100
m0rtiis said:
Trouble with the camera?
Sent from my GT-I9100
Click to expand...
Click to collapse
Nope, just personal emergencies that required me to be out of town for a week. I'll get some pics after work tonight.
I received my Ultra Thin Air Infinity White today and I have to say I'm quite disappointed.
The case doesn't fit that well. If I lay the phone on a table and press down on the left or right side the phone sinks deeper into the case. Without pressure the edges of the case are almost even with the screen's surface, it's only if I press down on the phone that the edges rise above the screen.
Is this a flawed specimen or are all the Ultra Thin Air cases like this?
m0rtiis said:
I received my Ultra Thin Air Infinity White today and I have to say I'm quite disappointed.
The case doesn't fit that well. If I lay the phone on a table and press down on the left or right side the phone sinks deeper into the case. Without pressure the edges of the case are almost even with the screen's surface, it's only if I press down on the phone that the edges rise above the screen.
Is this a flawed specimen or are all the Ultra Thin Air cases like this?
Click to expand...
Click to collapse
As I stated in the video, it's not as tight as I'd like it to be. It won't fall off but I feel a gap between. Seems like it's all cases.
Ploone said:
As I stated in the video, it's not as tight as I'd like it to be. It won't fall off but I feel a gap between. Seems like it's all cases.
Click to expand...
Click to collapse
No reflection on your review, I ordered the case before you published it.
It's a shame though, it looks good but I'm not sure I'll use it much.

Samsung Galaxy S2 Mesh Vent Case - thoughts?

Since a fair few of you will now have one of these, I was just looking to get some thoughts and opinions on one please?
Also I know it can stand vertical with this case on, but can it stand landscape?
Thanks
U can do everything without any trouble, it's a great case.
Sent from my GT-I9100 using XDA Premium
TecQuality said:
U can do everything without any trouble, it's a great case.
Sent from my GT-I9100 using XDA Premium
Click to expand...
Click to collapse
I've seen that it can stand vertical on it's own when the case is on, I was wondering if it could stand landscape too?
Thanks
Sent from my GT-I9100 using Tapatalk
Yeah, it's a great little case. I bought the black one, and i'm looking at getting a blue one next. Really cheap for official ones from Trusted Sellers on ebay (roughly £7 without original packaging, £10 with)
the only downside is it lets dust through the little holes, so you get a neat little dust pattern on the back side of your phone - a regular removal and wipe on your trousers helps.
I've had one on it for about 2 weeks and I like it, only drawback is I had to shave down by USB connector plastic to get it to fit while the case is still on. I ordered another from dealextreme because it was really cheap. I notice the case just touches the mic area but doesnt cover it up. I like it because it's not very bulky and the plastic 'mesh' back fits over a soft case and makes it rigid and easy to hold.
Good luck for u
Got a generic cheap mesh case from eBay, its pretty awesome but as mentioned above, gets a bit dirty after some long time, and mine is cheap enough to start breaking on corners, had a few falls tho, and that's the purpose of a case, so the phone doesn't break instead
I had this case, it was okay at the start but in the end the plastic on the top corner started breaking away. Also the one and only time I dropped my phone with this case on I got a nasty scratch just above the screen where there was no protection. I had to ditch it. I'm using a plain black tpu case now, much more protection. The advantage of the mesh case is that its so slim.
Edit : Oh yea and its a dust magnet.
Got the original mesh case, I dropped it twice since I got it. First time no damage at all, protected the phone nicely. Second time the phone popped out of the case as it hit the floor (shoulder hight, had a nice spin to it also) but both the case and the phone didn't suffer any damage. So I guess it serves it's purpose and looks nice as well.
Aesthetically nice.
Crap if you want proper protection.
I bought it merely to protect the camera and back when I put the phone down to prevent scratching. For overall phone protection it's definitely going to be lacking as the top and bottom edges of the phone aren't covered. The case clips on easily but stays on fairly tightly. The rubbery material gives better grip when holding the phone. Dust does get in over a week or so over the back of the phone, though isn't noticeable with the case on, and can easily be wiped off. I think the case looks pretty nice, all key areas are fully accessible and for the price of about £8 was worth it.
is not compatible for i9100P
I've just buy the genuine Samsung mesh vent case for my Samsung Galaxy S2 win NFC (i9100P) but it is NOT compatible. My colleague on the i9100, not NFC, perfect fit.
Some ideas?
Light, strong and keeps the thinness we all love about our S2s!
Dropped mine a couple of times on to wooden floors and no damage yet
Protects the camera lens too when lying on a flat surface
The dust comments are true but only noticeable when u take the cover off so no big deal and it fits so snugly it kinda looks part of the phone!
To answer original question tho, no only stands in portrait
I got an official Samsung one given with mine. Good at protecting from scuffs when it's on a table or desk but wouldn't like to trust it with protecting my phone from a fall.
That's why it's sat unused in a cupboard at work! If anyone wants it just message me and I'll stick in the post.
Andrewawright said:
I got an official Samsung one given with mine. Good at protecting from scuffs when it's on a table or desk but wouldn't like to trust it with protecting my phone from a fall.
That's why it's sat unused in a cupboard at work! If anyone wants it just message me and I'll stick in the post.
Click to expand...
Click to collapse
I'll take the case if it's on offer, let me know your thoughts on shipping to Australia Figure you sent all your convicts here, so a case shouldn't be a problem

Black Bumper for S3 (HQ pics) Recommend!!

Let me start this review just by saying that i love bumper cases. I
have been looking over the internet to find the best bumper case for
our Galaxy s3. I came across this case. Its a STRONG silicone bumper
that completes me in every aspect.
First of all. Its cheap. I think that everyone can try a cheap case
and if they dont like it, they throw it to their dog. (hehehe) Guys,
seriously. this is the best bumper case i have seen over the internet.
Why? It has a nice touch when you are holding your
phone. VERY nice touch. You will want to just hold your phone because
it has a nice feel Second of all: PROTECTION. And i mean it. Front,
back and sides are fully protected.
Front side (screen): the case has a slight bump on the edges so if the
phone drops the floor, its still protected (floor not the road hehe).
Back: Again, the case has a bump on the edges. So if your phone drops
on the back, protected!!! if you want to lay down your phone on a
table: PROTECTED.
Sides: Full protection, which is obvious why: its the case hehe.
Buttons: FULLy accessible button, both power and volume buttons. They
are covered by a soft silicone so there are very easy to press
(compare to the other tpu case i have reviewed)
I dont know if there are more colours available. You must check on
sellers ebay site.
Rating: If this case would be rated its a rock solid 5/5. Believe me
on this. It defenently worths every peny guys. I even compare it with
a TPU bumper case, that i have reviewed last week, amd this is by far
better.
Enjoy the pictures. I tried to take as many as possible.
I will review more bumper cases in the near future so stay tuned.
You can buy this on this link:
http://www.ebay.com/itm/Simple-Blac...620863?pt=PDA_Accessories&hash=item3f1b0aa03f
if you find this review helpful, hit thanks
Nice review! Around the volume rocker it might need a little work but I've already ordered one of these.. 4$ shipped to Canada and it looks decent.
Thanks for the review!
You will like the case mate, i guarantee you that. Feedback when you get it so everyone knows from you too
Good review, I have the white one. Easily the best case.
Owned a casemate brushed aluminum and SGP neo case
Sent from my Nexus 7 using Tapatalk 2
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
I have this case on my phone for a while and feels very steady guys. Note that i am snaping batteries daily, so the case comes on and off (by me i mean) and I havent got a problem so far.
Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Click to expand...
Click to collapse
davpel said:
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
Click to expand...
Click to collapse
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Its a single piece mate. Plus you dont lose any signal plus its a snap in snap out plus its veryyy cheap
How does this fit with a zag shield?
Galaxy S3 Paranoid ROM.
I think that with the zagg shield you will be ok. The case has already a tight fit so its better not to use extra protection underneeth. I dont think you need zagf shield for the back cover because its already protected from the case.
ponyboy82 said:
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Click to expand...
Click to collapse
If it is anything like the one for the Galaxy Nexus (and it appears to be the same), there is a hard plastic material used on the rear portions of the bumper, while the piece which surrounds the screen is flexible rubber. With the GN, the two materials separated.
is it easy to take it in and out of your pant pocket
denny_1986 said:
is it easy to take it in and out of your pant pocket
Click to expand...
Click to collapse
yes its very easy dont worry.
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
PaulQ602 said:
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
Click to expand...
Click to collapse
i dont know for sure, but i think that it is going to work because the case is thin on the bottom. :good:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
rlatjs17 said:
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
Click to expand...
Click to collapse
if your phone hits a straight floor, then its protected. if ur phone hits the road it might be scratched. try to avoid the roads hahahaha :laugh:
dunderball said:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Click to expand...
Click to collapse
i got mine in less than 3 weeks becuase the seller shipped the case in an envelope (like a mail). for three bucks its a bargain.

HHI Clear flexible TPU case for $.99

So, I went on a limb and ordered this:
http://www.handhelditems.com/matte-back-clear-flexible-case-p-201349.html
I would say I hope I don't regret it, but it was $.99 + about $3 for shipping. It hasn't shipped yet, but they provided a tracking number last night.
It's clear, has a cutout for the power button it appears, and I hope it works well. Just worried about it stretching out like the silicone on my current phone did. I'm not that familiar with TPU, so hoping that's not an issue.
Edit: I just got this case. It shipped in about 5 days by ups. It very thin but also makes me unsure if it'll absorb any impact at all. The first thing I noticed I think back is frosted, not completely clear. It's also not curved, but flat all around. I'm curious how well this will fit. The frosted back has a subtle texture to I as well, make it comfortable to hold and not slippery. The power button and all ports are exposed, only the volume buttons are covered and they feel stiff.
gk1984 said:
Just worried about it stretching out like the silicone on my current phone did. I'm not that familiar with TPU, so hoping that's not an issue.
Click to expand...
Click to collapse
The TPU case on my Galaxy S Captivate is still fine after almost 3 years. No stretching whatsoever. I don't take it on/off often though, so that may shorten the life. It is certainly not like the silicone I have seen on other cases (specifically a GS3 Defender case that a friend has) which is very loose and has already been replaced once or even twice.
Dazrin said:
The TPU case on my Galaxy S Captivate is still fine after almost 3 years. No stretching whatsoever. I don't take it on/off often though, so that may shorten the life. It is certainly not like the silicone I have seen on other cases (specifically a GS3 Defender case that a friend has) which is very loose and has already been replaced once or even twice.
Click to expand...
Click to collapse
This is encouraging. Could be a dollar well spent.
It's definitely not a bad purchase for $1. The only thing you need to be aware of with TPU cases like that is they retain heat, which can be really crappy if you're doing some hardcore gaming or have the phone sitting on your dash. As far as protection goes, my requirement is that the case has a lip that comes out a bit from the face of the phone. That way if I drop it face down my screen (hopefully) won't get scratched.
Does anyone know if AT&T stores have any HTC One cases / screen protectors yet.
OP - thanks for the case link. I picked one up also.
Now they gave me $1 store credit. I bought this case and only paid shipping if I decide to spend my 1 on something else.
Sent from my Evo 3D CDMA using xda app-developers app
gk1984 said:
Now they gave me $1 store credit. I bought this case and only paid shipping if I decide to spend my 1 on something else.
Sent from my Evo 3D CDMA using xda app-developers app
Click to expand...
Click to collapse
Damn...you could have bought mine...LOL.
iFalcon said:
Damn...you could have bought mine...LOL.
Click to expand...
Click to collapse
Well... I'm not saying yes, but I looked at the rest of their accessories and don't want/need anything else...
gk1984 said:
Well... I'm not saying yes, but I looked at the rest of their accessories and don't want/need anything else...
Click to expand...
Click to collapse
Agree completely...nothing else interests me.
This case came today, but I won't have time for a day or more to show it off or describe it.
But I did want to let everyone know I isn't completely clear. The back I will frosted clear. This is misleading from their page. We'll see how I looks when I get the phone.
Sent from my Evo 3D CDMA using xda app-developers app
I haven't been using this case much because I preferred my Speck clear case - well, the rubber/silicone trim around the volume buttons and usb port are streatching badly... so I put this $1 tpu case on instead finally. Dropped my phone on the asphalt last night from just below my shoulders. Phone landed on a corner and did a few flips. No damage what-so-ever. Not even a dent on a corner. Also have a Rhino Shield MK II on too, so if there would have been any screen damage, the shield did it's job well too.

Anyone running a case?

Hi All,
I am a S7 Active owner since launch day and really love the phone. Just curious if anyone is running a case or bumper-style case on the phone? I know the rubberized coating on the perimeter of the phone does a decent job, but if I could find something slim and good looking I may consider it just to protect from scuffing the perimeter and screen/back.
Chris
Cimo case here. love it. was getting rid of old phone stuff and came across some apple stickers; had to do it lol. nice slim tight fit, love it. also got glass screen protector which i highly suggest as the screen is polycarbonate plastic on top and WILL scratch easily.
https://www.amazon.com/Galaxy-Cimo-Premium-Flexible-Samsung/dp/B01ETKGOTW
Got a otterbox for it. The holder kinda sucks which can let the phone fall out in extreme situations and turns the phone into a bulky cumbersome brick but a indestructible cumbersome brick.
I am a case addict and have a case for every scenario:
Otterbox Defender for extreme scenarios.
BodyGuardz case for medium/heavy duty protection.
Body Glove for kickstand use.
SUPCASE UNICORN BEETLE for grip and fitted case (best all around). Pics below.
S5 Seidio holster for naked use.
Holster used with SUPCASE is the Note 4 Seidio holster.
Sent from my SAMSUNG-SM-G891A using Tapatalk
Thanks for sharing folks, keep 'em coming if you run a case.
Nope, going nude
Sent from my SAMSUNG-SM-G891A using XDA-Developers mobile app
Personally I've been running the Poetic Affinity Case. Its slim and adds just a smidge of protection. I take it off from time to time just to show people that my phone is not an S7 with a crazy case on, though, haha.
Link to Amazon US post: https://amzn.com/B01FCQGDHK
djbeefdip said:
Got a otterbox for it. The holder kinda sucks which can let the phone fall out in extreme situations and turns the phone into a bulky cumbersome brick but a indestructible cumbersome brick.
Click to expand...
Click to collapse
Seems I was wrong about the otter box belt case slipping out, if you put it in the exact way it wants you too it stays in no problem though it's not the most convenient position for sure
Majin101 said:
Nope, going nude
Sent from my SAMSUNG-SM-G891A using XDA-Developers mobile app
Click to expand...
Click to collapse
This.
I will be doing liquid screen protection, since I did my homework and read the countless reports of the overlay being prone to scratches. Beyond that, I might do a skin for the back/sides, but the phone seems bulky enough without adding a case.
I have a Poetic Affinity but rarely use it, I love way the phone feels without a case.
Sent from my Galaxy S7Active using Tapatalk
Ordered one for mine a few days ago off Amazon. It was made by zizo, I'll link it when I get home. Definately feels like a durable phone but being an avid outdoorsman in Alaska... I'd rather throw an extra layer on it than not.
sgrimes said:
Ordered one for mine a few days ago off Amazon. It was made by zizo, I'll link it when I get home. Definately feels like a durable phone but being an avid outdoorsman in Alaska... I'd rather throw an extra layer on it than not.
Click to expand...
Click to collapse
I just got myself a Zizo Bolt Cover as well.
CAPTainJRacine said:
I just got myself a Zizo Bolt Cover as well.
Click to expand...
Click to collapse
What do you guys think of the bolt cases?
I don't see myself using a case very often but it might be good for hiking/ hunting.
Slade8525 said:
Cimo case here. love it. was getting rid of old phone stuff and came across some apple stickers; had to do it lol. nice slim tight fit, love it. also got glass screen protector which i highly suggest as the screen is polycarbonate plastic on top and WILL scratch easily.
https://www.amazon.com/Galaxy-Cimo-Premium-Flexible-Samsung/dp/B01ETKGOTW
Click to expand...
Click to collapse
You should have put the apple sarcastically "up side down" at least!
jlczl said:
I am a case addict and have a case for every scenario:
Otterbox Defender for extreme scenarios.
BodyGuardz case for medium/heavy duty protection.
Body Glove for kickstand use.
SUPCASE UNICORN BEETLE for grip and fitted case (best all around). Pics below.
S5 Seidio holster for naked use.
Holster used with SUPCASE is the Note 4 Seidio holster.
Sent from my SAMSUNG-SM-G891A using Tapatalk
Click to expand...
Click to collapse
I am also using the SUPCASE UNICORN BEETLE and love it! Best all around case, so much so that I don't even look around any more! Easy to hold, great protection - front, back and edges, and slips in and out of my pockets without a lot of hassle!
I just went simple - TGSP and a clear TPU cover - "Fosmon DURA-T Slim TPU Back Cover Case". Paid less than $10 off amazon for both. The phone is sufficiently rugged on its own for my purposes, it was more about keeping it from looking like it went through a war zone.
What I particularly like about TPU covers is that they slide in and out of my pocket easily. nothing to grab my clothes with.
2 co-workers got the S7 active after I did - one had no intention of using a screen protector nor a case, but he's gotten some "microscratches" and is reconsidering. The other has gotten a couple very light scratches while waiting for the TGSP to come in, again from amazon.
Just next day'd " Samsung Galaxy S7 Active Case, Zizo [Bolt Series] " off Amazon (it looked the most rugged and thats what i was looking for) comes in tonight and I will try to write an update if I get a chance.
Got the case in, it's definitely rugged.
Audio jack is right next to the hanger clip which may make it difficult to insert head phones, but I only use blue tooth so that doesn't affect me.
The screen sealed on nice and over all the case fit real snug. I like it as of right now but will try to update once it goes through it's first real impact.... hopefully it does it's job.
Acinko said:
Got the case in, it's definitely rugged.
Audio jack is right next to the hanger clip which may make it difficult to insert head phones, but I only use blue tooth so that doesn't affect me.
The screen sealed on nice and over all the case fit real snug. I like it as of right now but will try to update once it goes through it's first real impact.... hopefully it does it's job.
Click to expand...
Click to collapse
I just got the same case. Power button is super hard to push
xc rider said:
I just got the same case. Power button is super hard to push
Click to expand...
Click to collapse
Weird, all my buttons are easy to push... Maybe there is some accuracy issues in production? Because all these buttons are easier to push then the Defender series I had on my other phones.
Maybe the rubber button over the power button just needs to be broken in a little. Try taking the case off and pressing the button in and out a few times to make sure it is pressing easily and then placing it back on.
So far I really like this case... its holding up well for me and its really easy to grip... personally I thought I wouldn't like the lanyard that came with it... but now I keep it on at all times and it keeps me from misplacing my phone so often.

Categories

Resources