[Q] Some help Please - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Hi Guys!
I need some help here. I have a galaxy s3 I747M . After I loaded the lastest 4.3 Jellybean I lost use of my USB port. I've tried everything I can do to make it work. Nothing has worked. I was on the phone with Samsung for 2 hours trying to fix this issue. I can charge my phone using the port, but that's all I can do. A house hold of Samsung phones, so I have tried all 6 other cables in the house etc. PC's don't see my phone(I've tried 5 different pc's btw) Nothing has worked. The highest Tech support Samsung can offer didn't help either. Seems under my Application manager under all apps. The USB setting is doing absolute nothing. Sitting at 0.00B... Tech guys says something went wrong with the loading of the 4.3 firmware. So he regrets to tell me that my phone is no longer under warranty and there isn't anything he can do. Like I mention I have hard reset to factory settings 4-5 times and nothing works. I know someone is going to say did you check off the Debugging... Yes I have. So there you go. I am unable to use ODIN to reflash firmware because the usb port doesn't work.
If someone can help me, that would be terrific. I should mention that I also tried using the SD Card and tried loading some firmware that I downloaded and tried using the Recovery Option boot to try to load the firmware that I got but I keep getting a error of "E Signature verification failed"
Samsung Galaxy S3
SGH-I747M
4.3 firmware
I747MVLUEMK5
Rogers Network Canada

Did you try different operating systems? You won't be able to load any custom software with a custom recovery.

I haven't no, I'm not sure how I would go about this. Like I mentioned, I've tried to put a md5 on my SD Card and tried to update that way, but keep getting an error. "E Signature verification failure" If I'm way off on how'd I'd do this, please do tell. I'm desperate and am willing to try anything...

BigPapaDune said:
I haven't no, I'm not sure how I would go about this. Like I mentioned, I've tried to put a md5 on my SD Card and tried to update that way, but keep getting an error. "E Signature verification failure" If I'm way off on how'd I'd do this, please do tell. I'm desperate and am willing to try anything...
Click to expand...
Click to collapse
can anyone help me on this???

If you are rooted, and were previously updated to 4.3 firmware, and if im reading correct are just trying to reflash that firmware, you can try using Mobile Odin. It won't flash the full firmware, but will do the kernel, modem, system and cache. Might be worth a shot. Otherwise look for a recovery flashable zip for the firmware. The .tar.md5 can only be used by Odin or Mobile Odin.

DocHoliday77 said:
If you are rooted, and were previously updated to 4.3 firmware, and if im reading correct are just trying to reflash that firmware, you can try using Mobile Odin. It won't flash the full firmware, but will do the kernel, modem, system and cache. Might be worth a shot. Otherwise look for a recovery flashable zip for the firmware. The .tar.md5 can only be used by Odin or Mobile Odin.
Click to expand...
Click to collapse
Hey Thanks for the reply "DocHoliday"
I am not rooted. I wish I was. I've poked around and I'm not sure how to use an .img file. I tried to put it on a micro SD and open it. I get a "E: Signature verification failed" Now all I did was throw the whole zip file on the SD card. Not sure if I have to extract it or what. If you can shed some light on how to do this I'd be a happy camper. All I can find is a JB 4.1.1 flashable zip.. I know i'm 4.3...Will this one work?

No. Do not flash older firmware over 4.3. It'll brick. Older roms are ok, but not the firmware. Can you link to what you are trying to flash? You said you were using an .md5 file earlier, but now you said you tried an .img and a .zip? I'm kinda confused as to exactly what you are trying to flash at this point. Zip files are for flashing in recovery. .tar.md5 files are for Odin. .img files are used differently.

DocHoliday77 said:
No. Do not flash older firmware over 4.3. It'll brick. Older roms are ok, but not the firmware. Can you link to what you are trying to flash? You said you were using an .md5 file earlier, but now you said you tried an .img and a .zip? I'm kinda confused as to exactly what you are trying to flash at this point. Zip files are for flashing in recovery. .tar.md5 files are for Odin. .img files are used differently.
Click to expand...
Click to collapse
Well Doc, I'm kinda confused as well, LOL... I was using odin files at first. not really knowing what i'm doing. I'm kind of starting to understand a few things like, .tar & .md5 files are used with Odin. I can't use odin because my usb on my S3 isn't working. So i'm trying to flash my firmware to either earlier(which I can't because i'm not rooted) or the same. In hopes to try to fix my usb port. My firmware is corrupted. So i've tried to put a stock 4.1.1 recovery zip on my sd card. But when I restart the s3 in recovery mode, and choose the zip file I get "E;signature verification failed" and it does nothing. I can't find a stock img zip file for i747M Rogers canada 4.3... I'm thinking i'm doomed here. What do you think??

Related

[Q] Trouble-shooting and making a tar.gz

So I'm hoping I'm posting in the appropriate place, and if not please feel free to point me in the right direction. There may be threads that already exist that are what I need, but I find it so hard to find the right thread on this website so after lots of trying I figured I'd just post.
I have Samsung Galaxy S III on WIND Mobile (SGH-T999V) which is said to be identical except in name to the T-Mobile Variant. I tried a few different ways to get root, and since the first which involved CWM weren't working I ended up using Odin to install (flash?) a file called root66.tar from god knows where. I acquired root, but every time I go to flash any Mod (through recovery > apply zip from sd), whether its CM9 or an update pushed to my phone from Wind, i get a status 7 report (I think it's checking for my devices product name to see that it matches whatever the thing is designed for and it doesn't check out?)
I've heard that this is a problem with CWM and all I need to do is flash the latest CWM or a different CWM. I've tried downloading the CWM app, and manually flashing, etc etc, none of it seems to actually change my recovery. Maybe I'm just missing something, but I'm quite sure the recovery simply is not being flashed.
So I found this thread for T-Mo variant that sed to get on root explorer and delete a couple files, which I'll probably try if nobody responds quickly, and hopefully nothing bad will happen, but I wanted to confirm that this will be safe for Wind variant.
Also, I'm freaking out a little inside and want to revert back to my stock ROM, which I found. The thing is it's in zip file and i'm unable to flash .zip. My Windows computer is out of commission and I only have Linux Mint, for which Odin doesn't work, so I have this program called Heimdall. I'm wondering how to package a tar.gz file, what is a tar.gz file? Why not just use a .tar file? or a .gz file? What's the difference. Basically, when I give Heimdall my tar.gz file, whats it gonna do with it?
Any thread-pointing or explanation would be super appreciated! Thank you in advance
edit: In regards to Heimdall, I've looked at some guides, they all site older versions, which appear to be different? the only flashhing I can do is either thru a Heimdall Firmware Package, which I don't know how to make but I'd like to learn, or with a PIT, which I dont have or understand, so any help there would also be good
The files you are supposed to delete are safe to do so. Or you can rename them. Either way will work. Once you do this you can now install recovery from rom or goo manager. Use the app to reboot recovery as well. Very easy.
You don't flash zip files from the computer. You do that in recovery.
There are also other ways to flash. I suggest you read through my firmware thread here:
http://forum.xda-developers.com/showthread.php?t=1949687
Pay attention to Mobile Odin, it may be your easiest and safest way to flash stock firmware.
You got root66.tar from god knows where???
Don't take this the wrong way but it sounds like you are getting a little careless and could cause more problems than you started with.
Do not flash anything except what you find in this forum. Aside from custom roms you should find everything you need in that thread.
Id also suggest reading the stickied threads in this section as well.
Good luck!
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
The files you are supposed to delete are safe to do so. Or you can rename them. Either way will work. Once you do this you can now install recovery from rom or goo manager. Use the app to reboot recovery as well. Very easy.
You don't flash zip files from the computer. You do that in recovery.
There are also other ways to flash. I suggest you read through my firmware thread here:
http://forum.xda-developers.com/showthread.php?t=1949687
Pay attention to Mobile Odin, it may be your easiest and safest way to flash stock firmware.
You got root66.tar from god knows where???
Don't take this the wrong way but it sounds like you are getting a little careless and could cause more problems than you started with.
Do not flash anything except what you find in this forum. Aside from custom roms you should find everything you need in that thread.
Id also suggest reading the stickied threads in this section as well.
Good luck!
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Haha, I know you flash .zip from recovery. I meant I'm unable to flash .zip through recovery, and I can't use Odin to flash any .tar for example, so I thought if I could learn how to use Heimdall, learn how to package a 'Heimdall Firmware Package', that'd be safest.
Anyhow, Thank you, I will be more careful
Edit: checking back in, I went to delete the files
/system/recovery-from-boot.p
/system/install-recovery.sh
They're nowhere to be found. I looked around other places like /root/system, and /mnt/system, still nothing. Any ideas?
dudds4 said:
Haha, I know you flash .zip from recovery. I meant I'm unable to flash .zip through recovery, and I can't use Odin to flash any .tar for example, so I thought if I could learn how to use Heimdall, learn how to package a 'Heimdall Firmware Package', that'd be safest.
Anyhow, Thank you, I will be more careful
Edit: checking back in, I went to delete the files
/system/recovery-from-boot.p
/system/install-recovery.sh
They're nowhere to be found. I looked around other places like /root/system, and /mnt/system, still nothing. Any ideas?
Click to expand...
Click to collapse
Sorry I really font know anything about heimdall. That's why I suggested looking into mobile odin. It will let you flash the firmware from the phone itself. The free version here on xda won't root the fw during flash like the paid version will.
If those files aren't on your phone then don't worry about them. They rewrite stock recovery every boot.
You can try this to get flashing to work in recovery:
Open /system/build.prop and wherever it says d2can, change it to d2tmo. And change T999V to just T999.
Make a copy of the original first and save to your external sdcard.
Now reboot recovery and try to flash again.
Sent from my SGH-T999 using xda app-developers app

SPRINT SPH_L710T stock flashable .tar for odin here!

Hey guys, I know a lot of us has been stuck with paper weights since we messed up flashing our phones thinking the L710 and L710t were the same... sooo, if you lost your imei and baseband unkown and no network and no audio and all these issues and just want to go back to stock.. you've come to the right place.
Remember this is for the sprint sph l710T .... note the T for triband lol
Step 1. Download Odin (search google)
Step 2. .tar file from here (https://mega.co.nz/#!cBBDEBpJ!t5IAcCaMg2w7GDI0zhhmZw0e7jh0Uv0v4gJpsH8gb6o)
put this in to odin in the pda section (note: if the file gives an md5 mismatch of some sort, remove (.md5) from the extension to leave the .tar)
step 3. put your phone in download mode... flash that shiiiiii, be patient and profit!
youre very welcome
BIIIGGGGG THANKS TO THESE GUYS FROM ANDROID FORUMS
Kdude63 for the link
the_dumbest_noob for actually pulling the .tar for kies to save our behinds!
yep i can verify i had to get this version cause the charging port on my phone died and according to the site it came from it should work across the board with Sprint, Boost, and Virgin Sph-L710T
I made a flashable zip that De-Odex the stock rom https://www.androidfilehost.com/?fid=95832962473400340 check it out if you want but read the description
Great news, thanks to all who made this happen!
I'm a novice at this, If I flash this .tar my phone will no longer be rooted, correct?
TujungaGuy said:
Great news, thanks to all who made this happen!
I'm a novice at this, If I flash this .tar my phone will no longer be rooted, correct?
Click to expand...
Click to collapse
if you flash the stock tar that is provided it will erase your entire phone except for the external storage and then replace it all with whats inside of it including your recovery
6th_Hokage said:
if you flash the stock tar that is provided it will erase your entire phone except for the external storage and then replace it all with whats inside of it including your recovery
Click to expand...
Click to collapse
I see, thanks! What then would be the benefit of flashing the deodex zip posted above? Will that allow me to uninstall bloatware? What's the purpose?
TujungaGuy said:
I see, thanks! What then would be the benefit of flashing the deodex zip posted above? Will that allow me to uninstall bloatware? What's the purpose?
Click to expand...
Click to collapse
De-Odex helps for themeing and swapping out system apps that aren't from Google.....like if you want a updated Samsung app like the music player for instance
6th_Hokage said:
De-Odex helps for themeing and swapping out system apps that aren't from Google.....like if you want a updated Samsung app like the music player for instance
Click to expand...
Click to collapse
Copy that. Out of curiosity, it appears most people need this .tar because they lost their baseband / modems after installing a different rom. Wouldn't it be easier to just flash the L710T NF4 modem firmware? I downloaded it and was going to try it with a few roms that were messing with my baseband. Thoughts?
TujungaGuy said:
Copy that. Out of curiosity, it appears most people need this .tar because they lost their baseband / modems after installing a different rom. Wouldn't it be easier to just flash the L710T NF4 modem firmware? I downloaded it and was going to try it with a few roms that were messing with my baseband. Thoughts?
Click to expand...
Click to collapse
that file basically just puts the right files in on your SD card which then can be used in PhilZ via custom restore i believe....let me check into that
Will this work for SPH-L710T on Virgin Mobile?
Because this happened to my friend on her's: http://androidforums.com/threads/sph-710t-deleted-google-play-services.887991/
TLR=She deleted Google Play Services and her phone is all kinds of screwed up, factory reset didn't help the phone refresh the system file on its own, so either I need the stock .tar OR someone to upload me their Google Play Services system app (my Stratosphere II's usually works once but I think Google Play tries to update it and it fails and then all the problems start again)
iviyth0s said:
Will this work for SPH-L710T on Virgin Mobile?
Because this happened to my friend on her's: http://androidforums.com/threads/sph-710t-deleted-google-play-services.887991/
TLR=She deleted Google Play Services and her phone is all kinds of screwed up, factory reset didn't help the phone refresh the system file on its own, so either I need the stock .tar OR someone to upload me their Google Play Services system app (my Stratosphere II's usually works once but I think Google Play tries to update it and it fails and then all the problems start again)
Click to expand...
Click to collapse
yes or at least should work on sprint,boost and virgin
6th_Hokage said:
yes or at least should work on sprint,boost and virgin
Click to expand...
Click to collapse
So her phone wouldn't get screwed up with any kind of modem/network setting incompatibility because she's a Virgin Mobile subscriber and this was pulled from a Sprint L710T would it?
iviyth0s said:
So her phone wouldn't get screwed up with any kind of modem/network setting incompatibility because she's a Virgin Mobile subscriber and this was pulled from a Sprint L710T would it?
Click to expand...
Click to collapse
correct it won't get screwed up
the one custom rom that will boot without the need for stock kernel is Conquest Singularity link https://www.androidfilehost.com/?w=files&flid=15185 currently im running the Conquest-Singularity-10-beta9-Full.zip with the Conquest-Singularity-10-b10-update.zip everything seems to work fine except for the rotation but someone over at android forums says Conquest-Singularity-9-Full.zip by it self works including rotation he never mentioned the Conquest-Singularity-9.5-Update.zip so that's basically it to figure out how to install this amazing rom go to the Closed OP here http://forum.xda-developers.com/showthread.php?t=2774902
dcutz said:
Step 1. Download Odin (search google)
Step 2. .tar file from here (link)
put this in to odin in the pda section (note: if the file gives an md5 mismatch of some sort, remove (.md5) from the extension to leave the .tar)
Click to expand...
Click to collapse
or the AP slot for Odin 3.09+
(you might want to add that to the OP)
THANK YOU, her phone is back to normal and it even kept her model intact!
And now I backed up her phone (Titanium and Nandroid) right this time (to SD not internal)
flash this kernel after you flash Conquest so rotation gets fixed https://www.dropbox.com/sh/5y5w6clj...T747-TW-KK-4.4-ATT-05-13-2014 kernel.zip?dl=0
You sir, have fixed my phone.
THANK YOU SOOOOOO MUCH! It actually worked! After 2 weeks of searching, this thing actually worked! I will definitely recommend this page to anyone who has the same problem.
dcutz said:
Hey guys, I know a lot of us has been stuck with paper weights since we messed up flashing our phones thinking the L710 and L710t were the same... sooo, if you lost your imei and baseband unkown and no network and no audio and all these issues and just want to go back to stock.. you've come to the right place.
Remember this is for the sprint sph l710T .... note the T for triband lol
Step 1. Download Odin (search google)
Step 2. .tar file from here (https://mega.co.nz/#!cBBDEBpJ!t5IAcCaMg2w7GDI0zhhmZw0e7jh0Uv0v4gJpsH8gb6o)
put this in to odin in the pda section (note: if the file gives an md5 mismatch of some sort, remove (.md5) from the extension to leave the .tar)
step 3. put your phone in download mode... flash that shiiiiii, be patient and profit!
youre very welcome
BIIIGGGGG THANKS TO THESE GUYS FROM ANDROID FORUMS
Kdude63 for the link
the_dumbest_noob for actually pulling the .tar for kies to save our behinds!
Click to expand...
Click to collapse
Do you still have this TAR available? The mega.co.nz link says the file is not available. I am in this exact same predicament where I thought this phone was the same as the L710 and now... I can't get anything I try to work. Always stuck in a boot-loop and I've tried a couple ROMs. I also can't seem to find a Stock ROM anywhere!
zentsang said:
Do you still have this TAR available? The mega.co.nz link says the file is not available. I am in this exact same predicament where I thought this phone was the same as the L710 and now... I can't get anything I try to work. Always stuck in a boot-loop and I've tried a couple ROMs. I also can't seem to find a Stock ROM anywhere!
Click to expand...
Click to collapse
I hate bumping an old thread, but in this case, I'm in the same predicament after flashing an OS and not having a way to update the PRL and such. The L710T TAR would be greatly appreciated.

I need stock firmware from ANYONE SM-t807A it does not exist on the web.

I have spent days looking, turn on goes to kies firmware screen yet when i put in the model and s/n it shuts and the new samsung app to replace kies is of no help. I can get to the download screen and odin shows it up but no ATT 10.5 Tab S Sm-T807A firmware ANYWHERE.
Please help this is a very very expensive paperweight and im not affiliated with ATT so them helping me is out of the question.
Samobile.com
info.sven said:
Samobile.com
Click to expand...
Click to collapse
They dont have it for the SM-T807A
0 Results found
You searched for "sm-t807a"
It would better if you just explain what state the tablet is in and how it got to that state.
There is no official software for the t807a.
OK here how it goes,
The tablet was completely fine.
The original owner ( a family member) tried to root it and didnt accomplish it, somehow through his process it ended up softbricked.
I can enter he download mode for odin but no firmware for this LTE model.
When I turn it on it goes to the kies screen but kies doesnt recognize it, and when I enter the serial it buffers for 2 seconds then closes the process of kies.
Also it says device isnt supported and yes I have installed the right drivers and uninstalled kies numerous times.
The new replacement prog for Kies (forgot the name) is no help either.
Im terrified of what to do next as it does go to the odin screen just no firmware as I stated.
Any update, or could someone upload the stock firmware so i can use Odin on it.
Samsung told me ATT can flash it for free onto it so its deff a possibility however I do not have a ATT account so they cant help me.
It doesn't boot because the stock recovery has been wiped/replaced.
Thats assuming you have tried to boot recovery?
The att models are all bootloader locked.
I'm surprised a bootloader locked device even allowed an unsigned image to flash or did they use something like flashify?
The stock ota update was posted by someone here a while back. Your only chance is to pull the recovery from it and try and flash it in download mode. However odin may refuse to flash it.
If I can find it I can pull out the recovery.img and post a modified cf_autoroot which will try and flash the original recovery, that's if odin will even accept the image.
I was used with something like kingroot.
"The stock ota update was posted by someone here a while back. Your only chance is to pull the recovery from it and try and flash it in download mode. However odin may refuse to flash it.
If I can find it I can pull out the recovery.img and post a modified cf_autoroot which will try and flash the original recovery, that's if odin will even accept the image."
this i would highly appreciate as the firmwares not deleted just corrupted.
i have searched the whole web.
here is the link to the pulled stock sm-t807a files from a xda member
https://drive.google.com/folderview?id=0B7ndOWpeCEJ4NFVHZmtvTFN0UFU&usp=sharing
PowerfulJY, any successfull update with your SM-T807A journey?
I have the same problem as you, and Odin refuses to flash your firmware files
synphonica said:
PowerfulJY, any successfull update with your SM-T807A journey?
I have the same problem as you, and Odin refuses to flash your firmware files
Click to expand...
Click to collapse
The images won't flash as they are raw unsigned images.
The update should contain a signed recovery image, but may still not flash with odin as the tar package you make will not be signed either and odin may refuse to flash
There may be a way though, another member managed to brick their device by flashing twrp using Heimdall, but couldn't then flash back the stock recovery with Heimdall.
If somehow the stock recovery can be forced to flash with Heimdall then there's a chance of unbricking the device.
I worked just flashed the FW part through AP did it on a friends pc all is back to new.
if you need a link for the ripped files just pm me.
also odin was used.
ashyx said:
The images won't flash as they are raw unsigned images.
The update should contain a signed recovery image, but may still not flash with odin as the tar package you make will not be signed either and odin may refuse to flash
There may be a way though, another member managed to brick their device by flashing twrp using Heimdall, but couldn't then flash back the stock recovery with Heimdall.
If somehow the stock recovery can be forced to flash with Heimdall then there's a chance of unbricking the device.
Click to expand...
Click to collapse
Unfortunately, Heimdall shows the same behaviour as Odin has.
AFAIK they are using the same protocol and seems that recovery CRC/sign check done via device internally, not via flashing tool.
PowerfulJY said:
I worked just flashed the FW part through AP did it on a friends pc all is back to new.
if you need a link for the ripped files just pm me.
Click to expand...
Click to collapse
Please explain in more detail what you have done for the benefit of others.
---------- Post added at 03:22 PM ---------- Previous post was at 03:22 PM ----------
synphonica said:
Unfortunately, Heimdall shows the same behaviour as Odin has.
AFAIK they are using the same protocol and seems that recovery CRC/sign check done via device internally, not via flashing tool.
Click to expand...
Click to collapse
Did you use command line or gui?
I used GUI, i didnt do the bootloader or choose any special clickies, I simply tried another pc with the same FW and it flashed in a hearbeast with PASS.
USB hubs are the devil, TRY EVERY USB PORT YOU HAVE
Kies sucks so does the new one.
any issues PM me and ill set you straightm any public questions ask away.
You have to download the IMG files and use the IMG to TAR app, I will provide a ZIP with all tars included but I assure you dont start ****ing around with bootloader images stick to AP.
AT&T is he devil.
The new Rockstar Whipped Strawberry OWNS, Oraneg Creme is Meh.
PowerfulJY said:
I used GUI, i didnt do the bootloader or choose any special clickies, I simply tried another pc with the same FW and it flashed in a hearbeast with PASS.
USB hubs are the devil, TRY EVERY USB PORT YOU HAVE
Kies sucks so does the new one.
any issues PM me and ill set you straightm any public questions ask away.
You have to download the IMG files and use the IMG to TAR app, I will provide a ZIP with all tars included but I assure you dont start ****ing around with bootloader images stick to AP.
AT&T is he devil.
The new Rockstar Whipped Strawberry OWNS, Oraneg Creme is Meh.
Click to expand...
Click to collapse
The gui question was for synphonica about Heimdall.
Are you saying you flashed the images with odin? Which version and which images?
This has been tried before and failed.
Also what do you mean you tried a pc with the same firmware, same firmware as what?
I'm new to rooting so be gentle, I just bought a Galaxy Tab S 10.5 sm-t807a (AT&T) with Android 5.0.2 Lollipop. I want to backup the stock ROM (firmware) so I can go back just in case I bricked it when rooting or installing custom ROM. I searched the web but there are no clear instruction on how to do it for an unrooted sm-t807a. Can someone provide me with a step-by-step instruction? I can share my backup of the stock ROM afterward since there does not seem to be one on the web. Thank you in advance for your help.
cluver53 said:
I'm new to rooting so be gentle, I just bought a Galaxy Tab S 10.5 sm-t807a (AT&T) with Android 5.0.2 Lollipop. I want to backup the stock ROM (firmware) so I can go back just in case I bricked it when rooting or installing custom ROM. I searched the web but there are no clear instruction on how to do it for an unrooted sm-t807a. Can someone provide me with a step-by-step instruction? I can share my backup of the stock ROM afterward since there does not seem to be one on the web. Thank you in advance for your help.
Click to expand...
Click to collapse
You can only root with Kingroot, don't try any other method or you'll brick it nor can you install a custom kernel or recovery.
Once you have root you can pull the partition images with EFS PRO or PARTITION BACKUP.
The best way to have a back up is to catch the stock Firmware update.
This is tricky so research how to do it.
There is one backup I know of:
https://drive.google.com/folderview?id=0B7ndOWpeCEJ4NFVHZmtvTFN0UFU&usp=sharing

SM-J200GU/DS Stock firmware?

Hello,
While trying to root my J200GU I accidently wiped the OS. Now I am left with the TWRP recovery mode and access to Download mode.
I have been trying to flash a stock firmware to my phone using different methods without success:
1- Used Odin tool but it fails when it begins to write the rom
2- ADB sideload - Gives me an error saying the rom is missing the META INF
3- TWRP Install - I tried different zipped roms and all of them give me error saying cannot detect MD5, although the file is there inside.
I am very confused I dont know what is wrong. I am not sure if the roms I use are good but since I already tried multiples I might be doing somethin else wrong.
Can anyone help me out. Does anyone has a stock rom that actually works? or a method?
Thanks.
V.
download the official samsung firmware at sammobile then flash it through odin.

Possibly Bricked SGH-M919

I have my T-Mobile S4 that I think is useless, however I would like to flash LineageOS to the device. When I turn on the device, it says that the Firmware upgrade encountered an issue. When I load up kies on my PC it doesn't detect my device. When going into boot mode it just says Downloading. Is there any way to fix my device?
Flash the latest stock ROM using Odin.
Getting an error
audit13 said:
Flash the latest stock ROM using Odin.
Click to expand...
Click to collapse
I have the stock ROM, however it keeps failing at around 90% completion.
What is the Odin error? Tried using different usb cables and usb ports?
If the phone was running the latest stock ROM, you could use Odin to flash TWRP and a custom ROM.
Link to Twrp: https://twrp.me/samsung/samsunggalaxys4tmobile.html
https://forum.xda-developers.com/showthread.php?t=2263001
flashing stock rom...
audit13 said:
Flash the latest stock ROM using Odin.
Click to expand...
Click to collapse
Audit13..., how do i flash the rom..? i only have odin and i can't get anything on my internal SD card... What kind of Rom do i need..? A .tar.., can't find one... I have a .zip , 14.1 that i downloaded... Don't know how to get odin to recognize it or how to load it... Everyone keeps wanting to have the rom and gapps already IN the phone on the SD card... Not sure what to do... I can get into download mode on the phone, green man, says downloading... I do get a PSS with TWRP (3.0.2-0) but i can't get it to load once installed... Any help..., anyone..????????
It's a S4 m918...
lentmain said:
Audit13..., how do i flash the rom..? i only have odin and i can't get anything on my internal SD card... What kind of Rom do i need..? A .tar.., can't find one... I have a .zip , 14.1 that i downloaded... Don't know how to get odin to recognize it or how to load it... Everyone keeps wanting to have the rom and gapps already IN the phone on the SD card... Not sure what to do... I can get into download mode on the phone, green man, says downloading... I do get a PSS with TWRP (3.0.2-0) but i can't get it to load once installed... Any help..., anyone..????????
It's a S4 m918...
Click to expand...
Click to collapse
Is your phone bricked?
What exactly are you trying to do?
audit13 said:
Flash the latest stock ROM using Odin.
Click to expand...
Click to collapse
Can you please post the link of the stock ROM and give a detailed guide on how to do flash it because I have the same problem?
Edit: Also please specify the Odin I need to use to flash.
MastetKitty78 said:
Can you please post the link of the stock ROM and give a detailed guide on how to do flash it because I have the same problem?
Edit: Also please specify the Odin I need to use to flash.
Click to expand...
Click to collapse
The latest T-Mobile firmware can be downloaded from here: https://www.sammobile.com/samsung/galaxy-s4/firmware/#SGH-M919
After downloading, unzip the file once using a unzip program such as 7zip.
You will need a Windows PC and Odin: https://odindownloader.com/download/odin3-v3-07
Instructions: https://odindownloader.com/tutorials/use-odin-downloader
It's been a very long time since I have flashed a Samsung s4. There's always a risk that something goes wrong. Best advice: be prepared to try again with different methods if the instructions don't work for your phone.

Categories

Resources