I'm sorry i had the wrong links and because of this i had miss information. So i formally apologize by updating with the proper links.
this first method doesn't work with the Sph-L710T or the Sph-L710 on NJ2/NJ3
First method: You can root the stock 4.4.2 ND8/NDC:laugh:
1st. Make sure your on 4.4.2 ND8 or NDC
2nd. Download Towel Root
3rd. Place Towel Root in sdcard or internal storage
4th. With any file manager find and install Towel Root
5th. Open Towel Root and well root
6th. Go to play store and download https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and also https://play.google.com/store/apps/details?id=stericson.busybox&hl=en let super user update the binary
7th. Flash any recovery you want {personally i went with PhilZ Touch (this was before PhilZ had a root Option)}
8th. Enjoy your rooted stock 4.4.2 ND8/NDC
Down below is one more way too root Stock ND8/NDC/NJ2/NJ3 or NF4/OA3 (L710T) and basically any other update
(link to the almighty ODIN)
Second Method: mostly recommended
1st. Odin flash TWRP
2nd. In Odin choose PDA, PA or AP then select the TWRP Tar you just downloaded
3rd. Make sure Auto reboot is unchecked (also at this time your s3 should be in download mode)
4th. Hit start and let Odin let it finish!!
5th. Hold power button to turn off your S3, after it turns off about 10 seconds later it will turn back on to the battery charging screen so before that quickly hold Volume+ and Home, to boot into recovery
6th. now your in TWRP
7th. so to root your stock rom with TWRP flash the following file SuperSU.zip by Chain fire (pro tip. Install any other custom recovery the same way I did for TWRP above if it is in .tar format)
and here is Philz recovery for the D2Lte 6.48.4 ( which you must flash in TWRP)
and here is TWRP that was made specifically for the D2Rephersher/triband/L710T TWRP (which you must flash in a recovery)
Third method Most recent.
Hidyman said:
This is in reference to Samsung Galaxy S3 for Boost Mobile SPH-L710.
Just want to let anyone out there that updated their Boost S3 to L710VPUC0J1 know that you can still root and/or ROM your phone.
Use the instructions to (use Odin to) update the recovery to TWRP first (in the second set of instructions). I had trouble trying to go right to PhilZ Recovery (which I believe is based off of ClockWorkMod). I Had to do the TWRP (twrp-2.8.7.0-d2spr.img.tar) first.
It was the only way to get it to actually accept the recovery, not sure why, maybe because the latest Samsung firmware fixed an exploit or two.
This is an older phone, but it is still a viable one.
I hope this helps someone out there.
It took me a while to figure this quandary out.
As always this WILL flag KNOX, but I'm sure this won't be an issue at this date and time (8/2016).
Click to expand...
Click to collapse
work on ND8 rom? sprint phone?
Tekone said:
work on ND8 rom? sprint phone?
Click to expand...
Click to collapse
i want to say yes but towel root does come with a warning that it might brick your device.....but i want to say yes since most things that can be done to the ND8 can be done to the NDC and also in reverse order.....so try it and report back it will be good to know if it works on both bootloaders
Sprint S3 Android 4.4.2 ND8-It works!
I just used this method to root my Sprint S3 running Android 4.4.2 and ND8, since my USB port is on the fritz, and it worked successfully. I have root, and was able to do a full apps backup with Titanium Backup, and gained root access in ES File Explorer. Next, download and install a custom backup. Thanks, great job, and could not have been made easier to do!
oops
Rooted the phone in one click. Unfortunately, I lost all data (no 3G or 4G connection). Did I goof? I'm looking in the stickies and can't seem to find an answer. I'd appreciate any help I can get.
henhun said:
Rooted the phone in one click. Unfortunately, I lost all data (no 3G or 4G connection). Did I goof? I'm looking in the stickies and can't seem to find an answer. I'd appreciate any help I can get.
Click to expand...
Click to collapse
ND8 or NDC? have you tried updating your profile/PRL?
6th_Hokage said:
ND8 or NDC? have you tried updating your profile/PRL?
Click to expand...
Click to collapse
Ya know. People keep talking about ND8 and ND___. I have no idea what that means. I know I should be embarrassed.
UPDATE: FIGURED IT OUT, BASEBAND VERSION. GOTCHA. IT IS NDC.
I was JUST coming back to update my post. I DID update the PRL and restarted my phone. That seems to have done the trick. Thank GOD I got my data connection back!! It worked. Even though I found the info somewhere else, thank you so much for the quick reply. PRL update fixes the problem. You're awesome.
I used it before i had a custom recovery. And on reboot i wouldnt have root. After i ran it root checker told me i was rooted then reboot killed. I installed philz and all was ok
Sent from my SPH-L710 using XDA Free mobile app
jbnorton0524 said:
I used it before i had a custom recovery. And on reboot i wouldnt have root. After i ran it root checker told me i was rooted then reboot killed. I installed philz and all was ok
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
many users of basically the same phone report different things with every root method out there. If it worked for you that's great tell other users what you did for it to work and if it didn't work, then ask for help and you will get help; some people don't have success with any method while others do with all of the methods.....my phone falls under every method.....
Successful Towelroot on VM Galaxy S3 4.4.2.NDC
6th_Hokage said:
you can root the stock 4.4.2
first step make sure your on 4.4.2
second step download Towel Root
third step place Towel Root in sdcard or internal storage
fourth step with any file manager find and install Towel Root
fifth step root
sixth step go to play store and download Superuser (Chainfire) and also Busy Box (Stericson) let super user update the binary
seventh step flash any recovery you want personally i went with Philliz Touch
eighth step if you want flash a custom rom now if not enjoy your rooted stock 4.4.2
Click to expand...
Click to collapse
Straight forward, fast and easy. I did notice the following:
1) Updating binary reported it did not successfully install. I've seen this before on other devices, but everything worked well. Ext SD and Camera all OK. Everything works fine so far - Titanium, Nandroid, Root Browser, etc.
2) At one point, I was directed to install Busy Box. Having done this on other devices, I said "Yes" and installed it.
3) I see that my device now shows Device Status as Custom ( was Normal before, if I remember correctly). Is this due to Busy Box?
4) Is Device Status the only way to know the KNOX Status? I see no yellow triangle as I did on my Galaxy Reverb.
5) I got a Google warning to uninstall Towelroot since it is usafe and a security exploit. I understand that.
I would like to verify the KNOX status and if tripped in the Towelroot process, to let potential users know of that possibility.
Thank You! And thanks to everyone who has continued to work on keeping root free!
Dave
dave260 said:
Straight forward, fast and easy. I did notice the following:
1) Updating binary reported it did not successfully install. I've seen this before on other devices, but everything worked well. Ext SD and Camera all OK. Everything works fine so far - Titanium, Nandroid, Root Browser, etc.
2) At one point, I was directed to install Busy Box. Having done this on other devices, I said "Yes" and installed it.
3) I see that my device now shows Device Status as Custom ( was Normal before, if I remember correctly). Is this due to Busy Box?
4) Is Device Status the only way to know the KNOX Status? I see no yellow triangle as I did on my Galaxy Reverb.
5) I got a Google warning to uninstall Towelroot since it is unsafe and a security exploit. I understand that.
I would like to verify the KNOX status and if tripped in the Towelroot process, to let potential users know of that possibility.
Thank You! And thanks to everyone who has continued to work on keeping root free!
Dave
Click to expand...
Click to collapse
Knox only notifies Samsung that your device isn't stock anymore not necessarily rooted like with a custom recovery and then flashed mods and what not but if you Odin the stock rom it resets the counters so Samsung will never know....and that i have noticed TowelRoot doesn't trip that counter.....only the recoveries and when you update the binary (<---completely forgot to fix that) you must hit the option normal not TWRP/CWM
churninern said:
I just used this method to root my Sprint S3 running Android 4.4.2 and ND8, since my USB port is on the fritz, and it worked successfully. I have root, and was able to do a full apps backup with Titanium Backup, and gained root access in ES File Explorer. Next, download and install a custom backup. Thanks, great job, and could not have been made easier to do!
Click to expand...
Click to collapse
That's great news because same boat here. It worked on 4.3 as well.
I had the phone hacked before and something must not be fully stock so the Ota fails.
I downloaded a package and mobile odin should flash it properly and then I can root it with this again and install a nice modified TouchWiz rom.
Darkangels6sic6 said:
That's great news because same boat here. It worked on 4.3 as well.
I had the phone hacked before and something must not be fully stock so the Ota fails.
I downloaded a package and mobile odin should flash it properly and then I can root it with this again and install a nice modified TouchWiz rom.
Click to expand...
Click to collapse
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Knox Counter and "Device Status"
6th_Hokage said:
Knox only notifies Samsung that your device isn't stock anymore not necessarily rooted like with a custom recovery and then flashed mods and what not but if you Odin the stock rom it resets the counters so Samsung will never know....and that i have noticed TowelRoot doesn't trip that counter.....only the recoveries and when you update the recovery you must hit the option normal not TWRP/CWM
Click to expand...
Click to collapse
Thanks for your response. I may be over thinking these indicators. All I did was Towelroot, successfully. On the phone, the "About Device, Status" now says CUSTOM (was "Official"). The Knox counter according to app "Phone Info" shows Knox Counter at 0x0. As you said, since the counter is not tripped, should be no problem on warranty. So then Device Status CUSTOM is not a problem? I'm not really worried about warranty at this point, but I think I'll hold off further mods for another 6 moths.
Thanks again for your help!
6th_Hokage said:
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Click to expand...
Click to collapse
Thanks. I tried the md8 and mk3 "mk3 is what it's on". Both just restart and get stuck on splash screen :/.
I have to go to download mode and and restart it that way to boot system back up.
Do you have any other suggestion. I'm not sure what part of the system is altered. It seems like a stock recovery and it's stock firmware "now rooted". Maybe the kernel.
I can't use USB at all.
I'm guessing maybe I should install twrp. Then install a stock zip or try out a 4.3 rom that way. I would like to get to md8 one way or another. Most md8 Roms want you to odin or flash an md8 base.
Darkangels6sic6 said:
Thanks. I tried the ND8 and MK3 "MK3 is what it's on". Both just restart and get stuck on splash screen :/.
I have to go to download mode and and restart it that way to boot system back up.
Do you have any other suggestion. I'm not sure what part of the system is altered. It seems like a stock recovery and it's stock firmware "now rooted". Maybe the kernel.
I can't use USB at all
I'm guessing maybe I should install TWRP. Then install a stock zip or try out a 4.3 rom that way. I would like to get to md8 one way or another. Most ND8 Roms want you to Odin or flash an md8 base.
Click to expand...
Click to collapse
cause they need the ND8 base to work as intended...my suggestion would be to get the usb port on your phone fixed but i don't know how expensive that will be
6th_Hokage said:
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Click to expand...
Click to collapse
6th_Hokage said:
cause they need the ND8 base to work as intended...my suggestion would be to get the usb port on your phone fixed but i don't know how expensive that will be
Click to expand...
Click to collapse
I was afraid you would say that.
Holy crap. May I say, I am quite impressed. I never planned on rooting my S3 (I like it that much!) but this just looked so damn easy to do and it was!
For the curious! I have a Virgin Mobile S3, and I'm on Kitkat 4.4.2, baseband NDC. Verified root with Root Checker Basic. No problems with mobile data.
Many thank yous, 6th_Hokage!
strangelady said:
Holy crap. May I say, I am quite impressed. I never planned on rooting my S3 (I like it that much!) but this just looked so damn easy to do and it was!
For the curious! I have a Virgin Mobile S3, and I'm on Kitkat 4.4.2, baseband NDC. Verified root with Root Checker Basic. No problems with mobile data.
Many thank yous, 6th_Hokage!
Click to expand...
Click to collapse
your welcome strangelady and if you want check out the links in my signature area for other cool stuff
added two more t=root methods
Related
|Guide|How-To| Root & Install Custom Recovery for 4.3 / 4.4 Update |16 July 2014 |
Warning: Following any of these instructions will void your warranty, and could possibly cause irreparable harm to your device (i.e. bricked). If you do not understand these risks, stop here and do not proceed. If you do not know how to use Odin, stop here and do not proceed. I am not responsible for anything that happens to your device. YOU chose to follow this guide.
If you have not updated to 4.3, go here.
If you have not updated to 4.4, go here.
Finally, there is no guarantee that either method will work for you.
Root Method #1:
The first thing you should try is CF-Autoroot since this has worked for many users.
If you successfully root with this method, you can simply install Goo Manager or ROM Manager and install recovery.
This method failed for me after many attempts.
Edit:
Here is some potentially useful info for root method #1 from ansonantonym.
Root Method #2:
1) Reboot in to download mode
2) Flash TWRP with Odin via PDA
3) Reboot to recovery then flash SuperSu and the Knox Remover
4) Reboot
5) Download SuperSu from the Play Store
6) Open SuperSu and update the binary when prompted
7) Reboot
8) Enjoy rooted 4.3/4/4
Downloads:
Odin
TWRP (Odin flashable tar)
SuperSu (v1.65)
SuperSu (v2.01)
DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.0
If you found another method that worked for you, please post here so that others may benefit.
If you are uncertain about any of the steps above, please ask your questions here before proceeding.
Please be sure to thank Chainfire, Dees_Troy, and Kaito95.
*****
Noob here, first off I unrooted a while ago, then took the ota 4.3, is the bootloader locked? Cause according to the cf auto root site if your bootloader is locked you'll probably brick your phone if you flash the auto root? Also do these steps have to be in order? I tried rooting by other means and installing supersu first, wouldn't work so I removed knox with the script, and then updated supersu in the play store and still nothing, can I try to flash cf auto root now and then update supersu in the play store? Thanks a million, need this thing rooted
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jeremyds45 said:
Noob here, first off I unrooted a while ago, then took the ota 4.3, is the bootloader locked? Cause according to the cf auto root site if your bootloader is locked you'll probably brick your phone if you flash the auto root? Also do these steps have to be in order? I tried rooting by other means and installing supersu first, wouldn't work so I removed knox with the script, and then updated supersu in the play store and still nothing, can I try to flash cf auto root now and then update supersu in the play store? Thanks a million, need this thing rooted
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Well, I'm not bricked, so I think that answers your question about the bootloader.
Do you have a custom recovery installed? I assume so since you say you flashed the Knox remover script. If you do have a custom recovery installed, just flash the SuperSu zip, then update in the Play Store.
upndwn4par said:
Well, I'm not bricked, so I think that answers your question about the bootloader.
Do you have a custom recovery installed? I assume so since you say you flashed the Knox remover script. If you do have a custom recovery installed, just flash the SuperSu zip, then update in the Play Store.
Click to expand...
Click to collapse
Ah it is so nice to have root again... Thank you so much for putting up with a noob.
Crazy events of a noob that lead me to root
Installed ota 4.3
Tried to root and install superuser by odin and then custom recovery to flash
Root didn't happen because of knox
Could only get to CWM custom recovery if it was right after odin and battery pull?...
Flashed the script to remove knox, which did remove knox
Tried the same root method as above and no root access
Tried supersu and then updating in play with no success
Changed security update settings etc nothing
Reset delvik, cache, permissions, etc nothing
Different root method and files for odin, and custom recovery stuck
Used files from this thread, went into custom recovery and flashed supersu
Installed supersu from play store...
Updated the binary using custom recovery
Rebooted...
ROOT access, all root applications work fine and root sticks even after reboots
I never messed with cf auto root method
THANK you guys for your time effort and sharing, helps noobs out like me a lot!
Sweet! I've missed root since I upgraded using the OTA file you provided. Looking forward to much other great things coming from you
Thank You
upndwn4par said:
Warning: Following any of these instructions will void your warranty, and could possibly cause irreparable harm to your device (i.e. bricked). If you do not understand these risks, stop here and do not proceed. If you do not know how to use Odin, stop here and do not proceed. I am not responsible for anything that happens to your device. YOU chose to follow this guide.
If you have not updated to 4.3, go here. Make sure you understand the risks and uncertainties described in the OP.
Finally, there is no guarantee that either method will work for you.
Root Method #1:
The first thing you should try is CF-Autoroot since this has worked for many users.
If you successfully root with this method, you can simply install Goo Manager or ROM Manager and install recovery.
This method failed for me after many attempts.
Root Method #2:
1) Reboot in to download mode
2) Flash TWRP with Odin via PDA
3) Reboot to recovery and flash SuperSu.
4) Flash the Knox Remover
5) Reboot
6) Download SuperSu from the Play Store
7) Update the binary when prompted
8) Reboot
8) Enjoy 4.3
Downloads:
Odin
TWRP (Odin flashable tar)
UpdateSuperSu
If you found another method that worked for you, please post here so that others may benefit.
If you are uncertain about any of the steps above, please ask your questions here before proceeding.
*****
Click to expand...
Click to collapse
Method two absolutely worked. Thank you so much. I was scared to flash TWRP but knowing you did it gave me the courage. Have full root and happy
questions about this root
Hi, I'm a little nervous with this root but I need the root as the phone is useless without it.
I have the [email protected] galaxy s3 I747 will all these files work with it im just double checking.
Also do you flash the knox remover the same way as you flash other things with the pda button?
Will I still be able to do factory restores?
Also I saw that knox remover removes a lot of apps, Can you install these deleted apps from the market if you need too?
THanks please let me know asap.
THANKS!!!! your a lifesaver didn't know how much longer i could take without root
Dunno where you guys got your 4.3 update from and how you got it working but I did the OTA and Root just does not want to stick. I used knox remover and Cf auto root but it loses root after a restart. SuperSu never opens and crashes as soon as you open it. I have a feeling Cf auto root is just not compatible for the ota 4.3 i747??
bkong said:
Dunno where you guys got your 4.3 update from and how you got it working but I did the OTA and Root just does not want to stick. I used knox remover and Cf auto root but it loses root after a restart. SuperSu never opens and crashes as soon as you open it. I have a feeling Cf auto root is just not compatible for the ota 4.3 i747??
Click to expand...
Click to collapse
use the TWRP method worked perfected for me
Thanks
PimpMyPC said:
Hi, I'm a little nervous with this root but I need the root as the phone is useless without it.
I have the [email protected] galaxy s3 I747 will all these files work with it im just double checking.
Also do you flash the knox remover the same way as you flash other things with the pda button?
Will I still be able to do factory restores?
Also I saw that knox remover removes a lot of apps, Can you install these deleted apps from the market if you need too?
THanks please let me know asap.
Click to expand...
Click to collapse
The second method worked great. I believe (and the way that worked for me) that you use your custom recovery to flash the knox script, not using Odin and pda. I don't think it removed anything other than knox, there is a different script for removing knox and att bloatware. Should still be able to factory reset... But can't guarantee that.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Root & Knox
When you go to Settings/More tab/Security/Device Administrators, You have KNOX and Android Device Manage. Both are unchecked on mine. So does that mean Knox is not working if unchecked and safe to try to Root?????
tailgunner9 said:
When you go to Settings/More tab/Security/Device Administrators, You have KNOX and Android Device Manage. Both are unchecked on mine. So does that mean Knox is not working if unchecked and safe to try to Root?????
Click to expand...
Click to collapse
Those settings are just for granting device administrator privileges. If unchecked, Knox is still doing it's thing, just not at an administrative level.
Yes, it is safe to try and root.
I have Android Device Manager as admin. That way if I ever lose my device I can just log in to the Play Store and locate and / or wipe the device.
To do this just flash the recovery.img file using odin and clicking the pda button correct?
Is there a way to freeze Knox instead of deleting it in the event I would want to go back to full stock?
After you are rooted, use an app like Titanium Backup(pro) or My Backup pro. Both will freeze it.
Root
If some of you out there use Root Method #2 and it works well and No problems, Please post and let us all know. Thanks
tailgunner9 said:
If some of you out there use Root Method #2 and it works well and No problems, Please post and let us all know. Thanks
Click to expand...
Click to collapse
I tried method 1 and failed.
Then tried method 2, but using a CMW tar that was posted yesterday.
I seem to be rooted!
So far no issues.. Just need to get everything setup as I had it in the leak.
indymx said:
I tried method 1 and failed.
Then tried method 2, but using a CMW tar that was posted yesterday.
I seem to be rooted!
So far no issues.. Just need to get everything setup as I had it in the leak.
Click to expand...
Click to collapse
Thanks indymx, may get the nerve up to try it on my AT&T S3. Let me know if you run into any problems. Guess Rom Manager and other programs that require Root are working Ok and you have rebooted few times to be sure it keeps Root?? Have Happy Thanksgiving.
I updated my galaxy S3 SPH-L710 (Virgin) with OTA 4.3 zip (L710VPUCMK3) update file from Sprint and deployed it on the phone via Odin. It seems that has deployed Knox bootloader on this phone. I need help rooting the device so that I can disable the Hands Free Activation system of the phone, as it is bothering my activation process on another provider. I tried deploying CM 6.0.3.1 Recovery via Odin , which got deployed but tripped the Knox Bootloader. I am not able to access the SD card internal storage hence accessing the Root zip via recovery is also futile. I do not care if the Warranty gets void on this as it will be used with a provider in India.
Any help will be appreciable.
Sam
samthekiller said:
I updated my galaxy S3 SPH-L710 (Virgin) with OTA 4.3 zip (L710VPUCMK3) update file from Sprint and deployed it on the phone via Odin. It seems that has deployed Knox bootloader on this phone. I need help rooting the device so that I can disable the Hands Free Activation system of the phone, as it is bothering my activation process on another provider. I tried deploying CM 6.0.3.1 Recovery via Odin , which got deployed but tripped the Knox Bootloader. I am not able to access the SD card internal storage hence accessing the Root zip via recovery is also futile. I do not care if the Warranty gets void on this as it will be used with a provider in India.
Any help will be appreciable.
Sam
Click to expand...
Click to collapse
I feel your pain. I just had to sort all of this out and, lucky you, I have the same build you've got. The only difference is I'm flashed from Sprint to VZW instead of Virgin.
http://forum.xda-developers.com/showthread.php?t=2541900
That thread should work for you. I used the Odexed version and did not install any of the mods (I'm only now getting ready to test the hotspot hack). I put all of the files directly on my phone and removed my microSD card and then handled the installation via CWM LTE v5. SuperSU 1.41 gave me no joy after rooting and I went with v1.80 which worked flawlessly.
Good luck my friend, may your KNOX-induced journey be more pleasant than mine was.
-Zen
FallenZen said:
I feel your pain. I just had to sort all of this out and, lucky you, I have the same build you've got. The only difference is I'm flashed from Sprint to VZW instead of Virgin.
http://forum.xda-developers.com/showthread.php?t=2541900
That thread should work for you. I used the Odexed version and did not install any of the mods (I'm only now getting ready to test the hotspot hack). I put all of the files directly on my phone and removed my microSD card and then handled the installation via CWM LTE v5. SuperSU 1.41 gave me no joy after rooting and I went with v1.80 which worked flawlessly.
Good luck my friend, may your KNOX-induced journey be more pleasant than mine was.
-Zen
Click to expand...
Click to collapse
Thanks Zen for the input! I went through that thread few pages to see whats going on and thought that the method mentioned there are preventive and going through an upgrade rather than making the mistake of installing (which unfortunately I did) KNOX. Now that you mentioned, I am curious about CWM LTE v5 as I have seen issues with older CW Recoveries either not reading data on internal flash (internal SD as it is referred by CWM Recovery). I hope just flashing this CWM LTE v5 will make stuff readable on card and will deploy the Odexed on the phone. I hope that KNOX plays well with this CWM LTE v5.
I cannot afford to brick these devices! Will let you know how it goes.
Thanks a lot for input!
samthekiller said:
I updated my galaxy S3 SPH-L710 (Virgin) with OTA 4.3 zip (L710VPUCMK3) update file from Sprint and deployed it on the phone via Odin. It seems that has deployed Knox bootloader on this phone. I need help rooting the device so that I can disable the Hands Free Activation system of the phone, as it is bothering my activation process on another provider. I tried deploying CM 6.0.3.1 Recovery via Odin , which got deployed but tripped the Knox Bootloader. I am not able to access the SD card internal storage hence accessing the Root zip via recovery is also futile. I do not care if the Warranty gets void on this as it will be used with a provider in India.
Any help will be appreciable.
Sam
Click to expand...
Click to collapse
Since you are on VM, which is actually MK5, you may want to flash this build. This will keep you from having to change your mmsc url, apns, etc. Good luck with whatever you decide
http://forum.xda-developers.com/showthread.php?t=2546505
Sent from my SPH-L710 using Tapatalk
jdsingle76 said:
Since you are on VM, which is actually MK5, you may want to flash this build. This will keep you from having to change your mmsc url, apns, etc. Good luck with whatever you decide
http://forum.xda-developers.com/showthread.php?t=2546505
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Thanks for this idea! I will use this release rather than Sprint. These are originally VM prepaid phones, I am modifying the radio to a local CDMA provider in India so these values will get updated again
Thanks!
Nice catch, JD! I wouldn't have even considered VM being a different build... :\ I still have much to learn.
i have boost s3 sph-l710 mk3 not having any luck gaining root i searched the whole weekend every method i try error/failed.... Can some one throw a tip please
This is how I rooted stock MK3 on Sprint. Read the instructions carefully. The trick for me was to go to the play store once I was done and re-install or upgrade SuperSU, then run it.
I am now on MK3, rooted.
http://forum.xda-developers.com/showthread.php?t=1963812
KaM1KaZ3 said:
i have boost s3 sph-l710 mk3 not having any luck gaining root i searched the whole weekend every method i try error/failed.... Can some one throw a tip please
Click to expand...
Click to collapse
Have you tried the first link I posted for Sam? If you're L710 MK3 then you're probably the same build as I am (L710VPUCMK3). If you are, then that should work for you. I mean, it worked for me even though I didn't factory reset my device... and it was plagued with some seriously crippling errors.
I used cf-auto root an it worked second try without auto boot checked Thanks for the thread
FallenZen said:
I feel your pain. I just had to sort all of this out and, lucky you, I have the same build you've got. The only difference is I'm flashed from Sprint to VZW instead of Virgin.
http://forum.xda-developers.com/showthread.php?t=2541900
That thread should work for you. I used the Odexed version and did not install any of the mods (I'm only now getting ready to test the hotspot hack). I put all of the files directly on my phone and removed my microSD card and then handled the installation via CWM LTE v5. SuperSU 1.41 gave me no joy after rooting and I went with v1.80 which worked flawlessly.
Good luck my friend, may your KNOX-induced journey be more pleasant than mine was.
-Zen
Click to expand...
Click to collapse
Zen, I tried using the v5 CWM LTE recovery, but does not seem to see the zip on the internal SD card (MK5, and SuperSU). Can you guide me to a recovery that works with stock KNOX loader.
Also I tried with the CWM Recovery (6.0.3.1 and 6.0.4) and cannot see anything on the storage except few folders, which seem to be system folder. I am flashing these via Odin (with only F.reset time checked). Wonder if this is KNOX induced or Recovery not working properly.
I am seeing /storage/emulated/0 as the stored path for all the zip files when I go via File Manager utility on Android. Not sure where to copy the files so as to see the contents right from /sdcard/ location on Recovery.
Thanks,
Sam
[UPDATE] Used TWRP and everything went very smoothly now I am on MK5 odexed with baseband MK3 with no SPRINT advertising. WiFi does not seem to work on this. Anyone having same problem?
Sam
samthekiller said:
[UPDATE] Used TWRP and everything went very smoothly now I am on MK5 odexed with baseband MK3 with no SPRINT advertising. WiFi does not seem to work on this. Anyone having same problem?
Sam
Click to expand...
Click to collapse
If you are on Sprint you should flash one of the MK3 roms. MK5 is for boost/virgin mobile
Flash this, wifi will work fine too: http://forum.xda-developers.com/showthread.php?t=2549136
CNexus said:
If you are on Sprint you should flash one of the MK3 roms. MK5 is for boost/virgin mobile
Flash this, wifi will work fine too: http://forum.xda-developers.com/showthread.php?t=2549136
Click to expand...
Click to collapse
Thanks CNexus. The service I am on is not Virgin, programmed to a provider in India. I updated the modem to MK5 and all started working. The cell phone is from Virgin.
Thanks!
I'm having trouble getting my phone rooted using any of these methods. Long time lurker - I'm new to posting on xda, but not new to rooting however definitely not an expert. Everything seems to be in line, I'm running MK3 on a L710. Tried the CF-AutoRoot method numerous times, tried it with and without Auto Reboot checked but it doesn't seem to be working. I'm checking for root with Root Checker.
In download mode, odin3 does its thing with no apparent errors. When the phone restarts and installs with the red android logo, it goes really fast (says its going to reboot in 10 seconds, and I think that screen is up for only about 10 seconds total) which I think might be an issue. When it boots up, superSU is not installed and the Root Checker App says nothing.
I'm sure I'm doing something dumb wrong. It's starting to get a little irritating.
dpagliar said:
I'm having trouble getting my phone rooted using any of these methods. Long time lurker - I'm new to posting on xda, but not new to rooting however definitely not an expert. Everything seems to be in line, I'm running MK3 on a L710. Tried the CF-AutoRoot method numerous times, tried it with and without Auto Reboot checked but it doesn't seem to be working. I'm checking for root with Root Checker.
In download mode, odin3 does its thing with no apparent errors. When the phone restarts and installs with the red android logo, it goes really fast (says its going to reboot in 10 seconds, and I think that screen is up for only about 10 seconds total) which I think might be an issue. When it boots up, superSU is not installed and the Root Checker App says nothing.
I'm sure I'm doing something dumb wrong. It's starting to get a little irritating.
Click to expand...
Click to collapse
Try going into the playstore and download SuperSu and install it then check with Root checker... Had to do it on my S4 also...
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
BIGSAMDA1ST said:
Try going into the playstore and download SuperSu and install it then check with Root checker... Had to do it on my S4 also...
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
Click to expand...
Click to collapse
Hey! I appreciate the quick response. Should have mentioned I have tried that in the past, but went ahead and tried it again and still no root
dpagliar said:
Hey! I appreciate the quick response. Should have mentioned I have tried that in the past, but went ahead and tried it again and still no root
Click to expand...
Click to collapse
Oh ok.. I know that on the S4 some had to odin CF-Auto root a few times for it to stick. I do have an S3 that my wife is using now and she won't let me root it lol.. But I would definitely try the CF again.
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
BIGSAMDA1ST said:
Oh ok.. I know that on the S4 some had to odin CF-Auto root a few times for it to stick. I do have an S3 that my wife is using now and she won't let me root it lol.. But I would definitely try the CF again.
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
Click to expand...
Click to collapse
Will definitely do. Does the version of odin matter? I have both 3.07 and 1.85 but have been using 3.07 most of the time.
dpagliar said:
Will definitely do. Does the version of odin matter? I have both 3.07 and 1.85 but have been using 3.07 most of the time.
Click to expand...
Click to collapse
I usually go with 1.85 although I do use 3.07 just as much...
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
WARNING: Following any of these instructions WILL void your warranty,
and could possibly cause irreparable harm to your device (i.e. bricked)
If you do Not understand these risks, stop here and do Not proceed.
If you do Not know how to use Odin, stop here and do Not proceed.
This guide is ONLY for SGH-T999 variants that are ALREADY RUNNING android 4.3
If you do Not have a SGH-T999 variant, stop here and do Not proceed.
If you are Not currently running android 4.3, stop here and do Not proceed.
I am not responsible for anything that happens to your device. YOU chose to follow this guide.
I have the SGH-T999V (samsung galaxy S3, canada, Videotron)
I flashed the full 4.3 firmware from samsung-updates.com as soon as it became available ... and then I tried to root it the usual ways
However knox prevented the superSu app from running, and it closed immediately, and obviously root was Not available to any app
This method will obtain ROOT and REMOVE the knox garbage
note ... altho it is optional to remove knox, I have Not tested without removing knox and do Not know if root will work using this method (guide) with knox still installed !
I did NOT create this method ... I simply found it, read thru user comments, and used it
FULL CREDIT goes to
@upndwn4par for the method ... the thread is here
@Kaito95 for the Knox Removal script ... the thread is here
@Dees_Troy for the TWRP recovery
@Chainfire for SuperSu
as you can see, this method was for the AT&T, Rogers, Bell, Telus Samsung Galaxy S3 ... I747 variants, I believe
So here is how I achieved a successful root on 4.3 using the above method, with adjustments for our T999 variant
Using Method #2
1. Download required files
a) download Odin 3.07 to your PC
b) download the latest TWRP recovery for your device, in TAR format, to your PC
click on your device here
scroll down on your device page to the section called Download - Odin Flashable Tar
below that, click on the Select the latest .tar file from here link
scroll to the bottom of the files and click on the latest TAR version
note to d2tmo users ... thanks to @Perseus71 it has been noted that 2.6 versions may have issues on your device, and it is recommended that you choose the 2.5.0.0 TAR version
example: Mine looks like this: openrecovery-twrp-2.6.3.0-d2can.tar
note to T999V users ... both d2can and d2tmo work for our device ... I personally use d2can
c) download SuperSu 1.65 zip to your DEVICE
c) download Knox Removal zip to your DEVICE
2. Reboot into Download mode ... VolumeDOWN + Power + Home
Run Odin
make sure that re-partition is NOT checked!
click the PDA button and point to the TWRP recovery TAR file that you downloaded above
connect your device to the computer ... wait briefly
the COMM port in top left box should turn blue
click Start
when it is done, PASSED, and phone has rebooted, disconnect device
3. Reboot into Recovery mode ... VolumeUP + Power + Home
Flash (install) the Knox Remover zip
Flash (install) the SuperSu zip ... it is version 1.65, current is 1.80, so it will prompt us to update later :good:
Reboot System
4. Update SuperSu from the Play Store
5. Open SuperSu
it should prompt that it needs to update the binary
accept and let it update the binary the Normal way
6. Reboot
7. Enjoy rooted 4.3, knox-free :laugh: :good:
thanks again to @Perseus71 for noting that it is possible that the default Enforcing mode of SElinux may cause issues with the ability and/or performance of some root apps despite being granted root permission
if you are experiencing similar issues, he recommends that you check out the SELINUX Status Changer app.
[I have Not personally tested this app]
reserved
in case
You may also wish to mention the SELINUX Status Changer. Here's the Thread.
With it enabled, root won't be stable.
Ahem. First ?
EDIT - TWRP 2.6.x.x has trouble remounting and formatting /Data. You may wish to reccomend version 2.5.0.0
Perseus71 said:
You may also wish to mention the SELINUX Status Changer. Here's the Thread.
With it enabled, root won't be stable.
Ahem. First ?
EDIT - TWRP 2.6.x.x has trouble remounting and formatting /Data. You may wish to reccomend version 2.5.0.0
Click to expand...
Click to collapse
hi and thanks for your input
I just looked at that SELINUX Status Changer thread and will keep an eye on it ... but for now I won't add it cuz:
the dev says it is pre-alpha version
Mine is Enforcing and root seems stable and hasn't had any problems, yet ... 4 days so far
SElinux is here to stay, and there's a big difference between proper (Google) implementation and samching implementation ... root blocked by samching, but not by standard android enforcing #BAM
congrats on being first, lol
what kind of things are you referring to when you say that root won't be stable?
what is your device d2 id?
I haven't had any problems with twrp 2.6.3 for d2can
THAT is something I WILL add, for your specific device
any particular reason you're recommending all the way back to 2.5 instead of just earlier 2.6 version?
cLogic said:
what kind of things are you referring to when you say that root won't be stable?
what is your device d2 id?
I haven't had any problems with twrp 2.6.3 for d2can
THAT is something I WILL add, for your specific device
any particular reason you're recommending all the way back to 2.5 instead of just earlier 2.6 version?
Click to expand...
Click to collapse
I have D2TMO AKA SGH-T999. Yes this is specific to my variant. I tested all the 2.6.x versions to establish that the /Data Problem exists in all these versions.
As to Root, well, Certain apps such as Nandroid Manager, and other apps have difficulty performing Root operation despite SuperSU granting it. @Aerowinder has a lot of stories. May I suggest you please visit the D2TMO Leaked 4.3 Rom thread in development for more details ?
Perseus71 said:
I have D2TMO AKA SGH-T999. Yes this is specific to my variant. I tested all the 2.6.x versions to establish that the /Data Problem exists in all these versions.
As to Root, well, Certain apps such as Nandroid Manager, and other apps have difficulty performing Root operation despite SuperSU granting it. @Aerowinder has a lot of stories. May I suggest you please visit the D2TMO Leaked 4.3 Rom thread in development for more details ?
Click to expand...
Click to collapse
fair enough ... thanks again for your input ... OP updated
Did this to the letter and soft bricked as soon as I flashed the mod zip in twrp. Stuck on pulsing samsung logo.
Had to reflash. Tried twice just to be sure.
(T999) (root, 4.3 stock)
trepoman said:
Did this to the letter and soft bricked as soon as I flashed the mod zip in twrp. Stuck on pulsing samsung logo.
Had to reflash. Tried twice just to be sure.
(T999) (root, 4.3 stock)
Click to expand...
Click to collapse
what do you mean ... bricked as soon as you flashed mod zip? you mean the knox removal script?
not sure how that's even possible
if you see the pulsing logo, then you rebooted
your T999 is rooted?
meaning it was before, or everything was fine after you did it twice?
cLogic said:
what do you mean ... bricked as soon as you flashed mod zip? you mean the knox removal script?
not sure how that's even possible
if you see the pulsing logo, then you rebooted
your T999 is rooted?
meaning it was before, or everything was fine after you did it twice?
Click to expand...
Click to collapse
The native tether mod. Knox remover worked fine.
Phone is rooted, stock 4.3.
Flashed tether mod in twrp recovery, which succeed but phone would not boot past the pulsing Samsung afterwards (10 minutes of pulsing, never booted past that) nor would it boot to recovery. I could get to boot loader luckily. I pulled the battery and tried again, same thing. Flashed stock 4.3 in Odin to get phone alive, tried flashing tether mod again, exact same result and same solution. HTH.
So close to clicking buy now on a nexus 5...
trepoman said:
The native tether mod. Knox remover worked fine.
Phone is rooted, stock 4.3.
Flashed tether mod in twrp recovery, which succeed but phone would not boot past the pulsing Samsung afterwards (10 minutes of pulsing, never booted past that) nor would it boot to recovery. I could get to boot loader luckily. I pulled the battery and tried again, same thing. Flashed stock 4.3 in Odin to get phone alive, tried flashing tether mod again, exact same result and same solution. HTH.
So close to clicking buy now on a nexus 5...
Click to expand...
Click to collapse
ummm .. not sure what this tether mod is that you are talking about, but it's not part of this guide, lol
this guide simply flashes the knox removal script (to delete knox files) and superSu (to root)
cLogic said:
ummm .. not sure what this tether mod is that you are talking about, but it's not part of this guide, lol
this guide simply flashes the knox removal script (to delete knox files) and superSu (to root)
Click to expand...
Click to collapse
Confounded facts. Always kicking my ass.
This is what happens when I stay up too late and try to do too many things. Linked from another thread and had too many tabs open.
Delete.
Thanks for the post. Sadly, no dice for me. I was directed to this post after creating my own. I've really held off asking for help, but only conclusion I can come to is I got one of those phones that just flat out won't root. Tried everything I can think of. Samsung Galaxy s3, SGH-T999v, 4.3, Wind (Canada). The Odin steps worked, when I boot into recovery, just get the stock android recover menu (original issue I've been having). Nothing seems to work in the slightest.
So I followed this to the letter and it all went well. Except, while the device seems to be rooted, SuperSU seems to be granting permissions to apps, Root Check Pro reports the device is rooted... I still can't use any apps that require root access. GameCIH doesn't work. ROM Manager doesn't work. Nothing wants to work.
Why is this happening? Because every step seemed to go flawlessly. Also, I have no idea how to put it back to stock if I wanted to try and start over lol.
[EDIT]
Oh yeah. Pertinent information. Samsung Galaxy S3 T999V through Mobilicity (Canada) running 4.3.
Used the 2.5 tar rather than the 2.6.
Also set SElinux to permissive.
ksec said:
Thanks for the post. Sadly, no dice for me. I was directed to this post after creating my own. I've really held off asking for help, but only conclusion I can come to is I got one of those phones that just flat out won't root. Tried everything I can think of. Samsung Galaxy s3, SGH-T999v, 4.3, Wind (Canada). The Odin steps worked, when I boot into recovery, just get the stock android recover menu (original issue I've been having). Nothing seems to work in the slightest.
Click to expand...
Click to collapse
are you sure you're running stock 4.3 ? baseband MK5 ?
re-do the Odin steps, except uncheck the auto reboot option .. so that it stops after successfully pushing the recovery tar
unplug the phone from the pc .. it should still be in download mode
pull the battery
then put it back in
boot into recovery immediately
if you see the TWRP recovery, great!, complete the guide and you'll be knox free and rooted
if that worked then there are two files that you seem to still have that are putting stock recovery back on normal boot .. post results here and I'll find them for you
Ergonyx said:
So I followed this to the letter and it all went well. Except, while the device seems to be rooted, SuperSU seems to be granting permissions to apps, Root Check Pro reports the device is rooted... I still can't use any apps that require root access. GameCIH doesn't work. ROM Manager doesn't work. Nothing wants to work.
Why is this happening? Because every step seemed to go flawlessly. Also, I have no idea how to put it back to stock if I wanted to try and start over lol.
[EDIT]
Oh yeah. Pertinent information. Samsung Galaxy S3 T999V through Mobilicity (Canada) running 4.3.
Used the 2.5 tar rather than the 2.6.
Also set SElinux to permissive.
Click to expand...
Click to collapse
did you go into superSu and update it's binary?
what do you mean, exactly, by apps won't work ?
do they run? you said they are being granted permission.
how were they installed?
we're they restored using Titanium?
the 2.5 TWRP was recommended for tmobile users.. we are T999V, can use d2can 2.6.3.0 or d2tmo 2.6.3.1
cLogic said:
did you go into superSu and update it's binary?
what do you mean, exactly, by apps won't work ?
do they run? you said they are being granted permission.
how were they installed?
we're they restored using Titanium?
the 2.5 TWRP was recommended for tmobile users.. we are T999V, can use d2can 2.6.3.0 or d2tmo 2.6.3.1
Click to expand...
Click to collapse
I updated the the SuperSU binary.
The apps will open but when it attempts to do anything requiring root access it is denied or fails.
SuperSU and Knox were installed through the TWRP recovery boot thing as the guide specified. Other things were either installed from the app store or downloaded APK files. I didn't have Titanium at the time I attempted rooting my phone. Wasn't mentioned in the guide so I never got it. I have the basic version now from the play store now. As I'm sure you can tell, I've never rooted my device before. Always had a friend do it for me.
Should I just restore to a stock install (not sure how to do this) and then try again? Especially now that I know the 2.5 warning was specifically for T-Mobile users? Or can I just put the 2.6X version on my phone and try again? lol
it's working
@ cLogic
Thanks a lot man, thanks to you I successfully root my sgh-t999v (stock android 4.3)
I've managed to use GooManager from the Google Play store to install latest TWRP and to flash the 4.3 mod.
Having issues when trying this. I followed all the steps and received no errors. But when the SuperSu ap tries to open on my phone it crashes, the ap only phone is stable.
I have Tomo G3 4.3 Stock rom
Flashed the TW 2.5.0.0 version
Rebooted into the touch recovery
Ran Knox removal
Ran SuperSu
Booted
Knox is not in my list off apps
SuperSu does show
Cant not open supersu, updating binarys does not work since the app crashes.
(Edit)--> Redid the whole process but did not let the phone reboot during the TW flash and the Zip installs. Seemed to of fixed the issue. (Edit)
Thanks added
I flashed Stock 4.3 via Odin before coming across this guide and now my device seems to be stuck at the boot screen. My question is, if I haven't completely booted, can I reflash using the modified version of 4.3 (root, deodexed, knox removed)? Do I have any other options right now?
Mine Note II is SGH-I317M with baseband version of I317MVLUCMK5 and KNOX.
I have tried CF-Auto-Root and Root SuperSU but weren't able to root my note II.
I have tried using different version of Odin, reinstalled the USB driver and tried using philz touch and cwm6 root to backup and root.
Nothing worked........Can't even start SuperSU.....
KNOX keep giving me security notice "An attempt to access a secure area on your device without authorisation has been blocked."
I also tried an updated Superuser. Still nothing worked....
Any idea anyone?
Thank you very much.
Stewegg said:
Mine Note II is SGH-I317M with baseband version of I317MVLUCMK5 and KNOX.
I have tried CF-Auto-Root and Root SuperSU but weren't able to root my note II.
I have tried using different version of Odin, reinstalled the USB driver and tried using philz touch and cwm6 root to backup and root.
Nothing worked........Can't even start SuperSU.....
KNOX keep giving me security notice "An attempt to access a secure area on your device without authorisation has been blocked."
I also tried an updated Superuser. Still nothing worked....
Any idea anyone?
Thank you very much.
Click to expand...
Click to collapse
You need to disable knox first
http://forum.xda-developers.com/showthread.php?p=49860203
Stewegg said:
Can't even start SuperSU
Click to expand...
Click to collapse
This is really weird, when I did this to my SGH-I747/M it was updated to stock 4.3 so it had KNOX and I got the same message as you but to disable it, all I did was open SuperSU and it prompts me to disable KNOX and then it's "fully" rooted and I could install a custom recovery after that.
I know it worked on the S3 because it's currently rooted running a custom ROM. Are you using the right version of Odin? I was trying to use 1.85 I think it was and it wasn't working at first, I tried 3.09 and it worked like a dream.
Did you remember to go into the Security Settings and turn off Reactivation Lock? I know this can play a factor when rooting with KNOX.
Also, KNOX never goes away, even though I'm running an AOSP ROM now on the S3, it still shows the KNOX counter with 0x1, even with it disabled. I can also not get any ROM's lower then 4.3 to work anymore so I can no longer run RootBox 4.2.2 on the S3.
I'm not sure if it's just me, or just my phone, but since that KNOX update was already on it when I got the phone used, it will not let me go to any ROM's lower then 4.3
VeeDaub said:
This is really weird, when I did this to my SGH-I747/M it was updated to stock 4.3 so it had KNOX and I got the same message as you but to disable it, all I did was open SuperSU and it prompts me to disable KNOX and then it's "fully" rooted and I could install a custom recovery after that.
I know it worked on the S3 because it's currently rooted running a custom ROM. Are you using the right version of Odin? I was trying to use 1.85 I think it was and it wasn't working at first, I tried 3.09 and it worked like a dream.
Did you remember to go into the Security Settings and turn off Reactivation Lock? I know this can play a factor when rooting with KNOX.
Also, KNOX never goes away, even though I'm running an AOSP ROM now on the S3, it still shows the KNOX counter with 0x1, even with it disabled. I can also not get any ROM's lower then 4.3 to work anymore so I can no longer run RootBox 4.2.2 on the S3.
I'm not sure if it's just me, or just my phone, but since that KNOX update was already on it when I got the phone used, it will not let me go to any ROM's lower then 4.3
Click to expand...
Click to collapse
Where is the Reactivation Lock located?
I can not find it in the Security Settings.
mrevankyle said:
You need to disable knox first
http://forum.xda-developers.com/showthread.php?p=49860203
Click to expand...
Click to collapse
I was following the steps in the post you have posted.
When I tried to flash the DrKetan_MultiTool_AdvanceV5, it gives me an error: E:signature verification failed. and stopped the flash.
Any idea?
Stewegg said:
I was following the steps in the post you have posted.
When I tried to flash the DrKetan_MultiTool_AdvanceV5, it gives me an error: E:signature verification failed. and stopped the flash.
Any idea?
Click to expand...
Click to collapse
hey man i have the same phone as you, just found an easy way to root it after struggling. Just updated to Stock 4.3 Bell Firmware using odin, completely fresh phone.
How to root it:
1. Flash philz recovery in odin "philz_touch_6.19.3-t0lteatt.tar.md5" (Download mode= Vol Down + Home + Power)
2. Reboot back into android once
3. Power off phone
4. Boot into recovery (Vol Up + Home + Power)
5. Goto philz settings->Reroot rom (or something to that effect)
6. Recovery will tell you done, and to reboot and install SuperSU from Play Store
7. Reboot download and install SuperSU from Play Store
8. Open SuperSU it will immediately ask if you would like to disable Knox.. say yes
9. Done
Link to philz recovery tar for our phone i317M
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt/philz_touch_6.19.3-t0lteatt.tar.md5
Does this work?
My wife's Rogers note2 is bone stock running I317MVLUCMK5.
She is paranoid about Knox and possibly killing her phone.
She wants me to get it rooted, but I'm struggling to find a clear cut answer.
Also, it would be better if anyone knows how to (if possible) downgrade to 4.1.2 and start from there... As I know how to do that one like the back of my hand.
Sent from my SGH-I317 using Tapatalk
Stewegg said:
Mine Note II is SGH-I317M with baseband version of I317MVLUCMK5 and KNOX.
I have tried CF-Auto-Root and Root SuperSU but weren't able to root my note II.
I have tried using different version of Odin, reinstalled the USB driver and tried using philz touch and cwm6 root to backup and root.
Nothing worked........Can't even start SuperSU.....
KNOX keep giving me security notice "An attempt to access a secure area on your device without authorisation has been blocked."
I also tried an updated Superuser. Still nothing worked....
Any idea anyone?
Thank you very much.
Click to expand...
Click to collapse
Simple. First get the root. Like the su binary and stuff. once you are rooted get suersu. What I mean by first get root is literally get root through a program or something. After this you will have root but you wont have root access. So get supersu now and launch the app. It will ask to update your su binary. Say yes. then the thing will say something about knox then ask you if you want to try to disable knox. Tap yes and knox should be disabled and your su binary should be updated and working.
I'm exactly in the middle of nowhere .. Try to root with CF method. After the first try and reboot. I got the knox alert "unauthorized, bla, bla" the thing is that I can't get the full root or return to stock. Also when I tried to install knox in order to Uninstaller it, I can't. My phone is not allowed to use knox any more... I already tried to download Su and update it in order to disable knox with no success.... Stupid knox and stupid 4.3:crying:
My phone is I317M Rogers, it run stock 4.3. I followed this guide, http://forum.xda-developers.com/showthread.php?t=2618261 rooted success.
Eun-Hjzjined said:
Does this work?
My wife's Rogers note2 is bone stock running I317MVLUCMK5.
She is paranoid about Knox and possibly killing her phone.
She wants me to get it rooted, but I'm struggling to find a clear cut answer.
Also, it would be better if anyone knows how to (if possible) downgrade to 4.1.2 and start from there... As I know how to do that one like the back of my hand.
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
ifentanez said:
I'm exactly in the middle of nowhere .. Try to root with CF method. After the first try and reboot. I got the knox alert "unauthorized, bla, bla" the thing is that I can't get the full root or return to stock. Also when I tried to install knox in order to Uninstaller it, I can't. My phone is not allowed to use knox any more... I already tried to download Su and update it in order to disable knox with no success.... Stupid knox and stupid 4.3:crying:
Click to expand...
Click to collapse
koodiifin said:
hey man i have the same phone as you, just found an easy way to root it after struggling. Just updated to Stock 4.3 Bell Firmware using odin, completely fresh phone.
How to root it:
1. Flash philz recovery in odin "philz_touch_6.19.3-t0lteatt.tar.md5" (Download mode= Vol Down + Home + Power)
2. Reboot back into android once
3. Power off phone
4. Boot into recovery (Vol Up + Home + Power)
5. Goto philz settings->Reroot rom (or something to that effect)
6. Recovery will tell you done, and to reboot and install SuperSU from Play Store
7. Reboot download and install SuperSU from Play Store
8. Open SuperSU it will immediately ask if you would like to disable Knox.. say yes
9. Done
......
Click to expand...
Click to collapse
koodiifin's way worked perfectly!
Thank you koodiifin!
Hey, everyone. It's been a long time since I've rooted my phone. I ended up hard bricking it and getting a new one. (I tried using ROM Manager to update my Clockwork Mod and it downloaded and installed, and when it said it needed to restart the device, I accepted, and that was the last time I was able to use the phone).
Anyway, I got it replaced and I haven't rooted it. It's been about 8 months or so and I've decided I want to root my phone again. However, after doing a little research, I saw that rooting is now different when the device is running 4.4.2. I want to be able to run CyanogenMod and flash nightlies and whatnot. Is it safe for me to root my phone and flash CyanogenMod? If so, could someone direct me step by step to doing it? It's been so long and I don't want to brick another phone.
tl;dr -> havent rooted a phone in almost a year, kinda forgot how. SPH-L710 running 4.4.2. is it safe? how do i do it? i want cyanogenmod
markopolomp said:
Hey, everyone. It's been a long time since I've rooted my phone. I ended up hard bricking it and getting a new one. (I tried using ROM Manager to update my Clockwork Mod and it downloaded and installed, and when it said it needed to restart the device, I accepted, and that was the last time I was able to use the phone).
Anyway, I got it replaced and I haven't rooted it. It's been about 8 months or so and I've decided I want to root my phone again. However, after doing a little research, I saw that rooting is now different when the device is running 4.4.2. I want to be able to run CyanogenMod and flash nightlies and whatnot. Is it safe for me to root my phone and flash CyanogenMod? If so, could someone direct me step by step to doing it? It's been so long and I don't want to brick another phone.
tl;dr -> havent rooted a phone in almost a year, kinda forgot how. SPH-L710 running 4.4.2. is it safe? how do i do it? i want cyanogenmod
Click to expand...
Click to collapse
you wont brick it by rooting but here is 3 methods
1. first and mostly recommended flash Philz recovery for the D2Lte in Odin just make sure your on the latest one then root your stock rom with the option under Philz settings called Re-root(SuperSU)
2. you can use any recovery and flash the SuperSU zip from Chain fire
3. you can just use TowelRoot for the actual rooting process then download SuperSU and BusyBox from the PlayStore
method 2 implies that you already have a recovery installed
method 3 will give you root but no recovery
6th_Hokage said:
you wont brick it by rooting but here is 3 methods
1. first and mostly recommended flash Philz recovery for the D2Lte in Odin just make sure your on the latest one then root your stock rom with the option under Philz settings called Re-root(SuperSU)
2. you can use any recovery and flash the SuperSU zip from Chain fire
3. you can just use TowelRoot for the actual rooting process then download SuperSU and BusyBox from the PlayStore
method 2 implies that you already have a recovery installed
method 3 will give you root but no recovery
Click to expand...
Click to collapse
Is there a video of how to root doing this from start to finish? I'm just too nervous to do it on my own without visuals lol
markopolomp said:
Is there a video of how to root doing this from start to finish? I'm just too nervous to do it on my own without visuals lol
Click to expand...
Click to collapse
Towelroot is super easy to use, its a one click method.
You can find a full guide for the S3 here
Pretty simple to do though,
Download the TowelRoot apps from http://towelroot.com.
Enable Unknown sources on your phones, normally this option located on Settings > Security.
Install the downloaded app (tr.apk).
Now run the app, just tap the “make it ra1n” button to start rooting.
Let the app perform the root job, wait for about 15 seconds and your phone will restart automatically.
As soon as the phone is turned on, update SuperSU to v1.99r4 or newer.
vagabond007 said:
Towelroot is super easy to use, its a one click method.
Pretty simple to do though,
Download the TowelRoot apps.
Enable Unknown sources on your phones, normally this option located on Settings > Security.
Install the downloaded app (tr.apk).
Now run the app, just tap the “make it ra1n” button to start rooting.
Let the app perform the root job, wait for about 15 seconds and your phone will restart automatically.
As soon as the phone is turned on, update SuperSU to v1.99r4 or newer.
Click to expand...
Click to collapse
In my case, TowelRoot didn't work due to Samsung Knox secure boot locks the recovery rom. You can't either go to recovery mode at all or read your phone internal storage/external SD storage from TWRP. I flashed CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5 and it would get SuperSU installed to your phone. The SuperSu stopped working when disabling Knox.
Alternatively, I tried to downgrade to the 4.04 or 4.1.2 stock rom by Odin, but failed. So far, I don't have any way to root my phone and install CM11. Any suggestions will be appreciated.
wuyiL said:
In my case, TowelRoot didn't work due to Samsung Knox secure boot locks the recovery rom. You can't either go to recovery mode at all or read your phone internal storage/external SD storage from TWRP. I flashed CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5 and it would get SuperSU installed to your phone. The SuperSu stopped working when disabling Knox.
Alternatively, I tried to downgrade to the 4.04 or 4.1.2 stock rom by Odin, but failed. So far, I don't have any way to root my phone and install CM11. Any suggestions will be appreciated.
Click to expand...
Click to collapse
that's why you go with the first option i gave.....
6th_Hokage said:
that's why you go with the first option i gave.....
Click to expand...
Click to collapse
Here here. And, you'll learn how to use Odin and philz. Very very valuable (imo) ?
Sent from my SPH-L710 using Xparent Cyan Tapatalk 2
markopolomp said:
Is there a video of how to root doing this from start to finish? I'm just too nervous to do it on my own without visuals lol
Click to expand...
Click to collapse
Have you figured that out?