Related
right ima cut to the chase
i used to use cyanogen mod 10 but wanted a official rom from sam mobile so i flashed via odin and cocked up my note 2 n7100
now i can get into recovery and download mode and i have flashed the same cm10 via tw recovery and it hangs on boot animation
i then wiped and flashed via recovery SSHD rom and it also hangs at boot animation so what do you guys think is wrong?
i need this fixed it cost way too much to just thow in the junk draw espcially since i cant work anymore.
thanks
-FatBoyNate
When you change your rom you need to wipe data from recovery.
FatBoyNate said:
right ima cut to the chase
i used to use cyanogen mod 10 but wanted a official rom from sam mobile so i flashed via odin and cocked up my note 2 n7100
now i can get into recovery and download mode and i have flashed the same cm10 via tw recovery and it hangs on boot animation
i then wiped and flashed via recovery SSHD rom and it also hangs at boot animation so what do you guys think is wrong?
i need this fixed it cost way too much to just thow in the junk draw espcially since i cant work anymore.
thanks
-FatBoyNate
Click to expand...
Click to collapse
Always flash custom rom through custom recoverys only (not from stock rom). Flash TWRP or CWR or Philz recovery first and then flash custom rom.
After flashing custom rom or stock rom, first wipe data and cache (as above said) before rebooting.
sent from my GT-N7100. Press thanks if I helped..
MBariya said:
Always flash custom rom through custom recoverys only (not from stock rom). Flash TWRP or CWR or Philz recovery first and then flash custom rom.
After flashing custom rom or stock rom, first wipe data and cache (as above said) before rebooting.
sent from my GT-N7100. Press thanks if I helped..
Click to expand...
Click to collapse
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
FatBoyNate said:
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
Click to expand...
Click to collapse
same has happened to me.
FatBoyNate said:
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
Click to expand...
Click to collapse
ItzMar said:
same has happened to me.
Click to expand...
Click to collapse
get into recovery flash this file http://d-h.st/fWr u will loose evrything from internal memory, now after it reboot to recovery just flash your rom but dont reboot after installation.
first click fix permission
then wipe cache and dalvik atleast twice
then reboot!
it should load the rom fine, and i would suggest to stay with philz recovery and create a backup of efs and rom both the terminal way and through recovery too
shhbz said:
get into recovery flash this file http://d-h.st/fWr u will loose evrything from internal memory, now after it reboot to recovery just flash your rom but dont reboot after installation.
first click fix permission
then wipe cache and dalvik atleast twice
then reboot!
it should load the rom fine, and i would suggest to stay with philz recovery and create a backup of efs and rom both the terminal way and through recovery too
Click to expand...
Click to collapse
once i flashed it i gete:error opening 'data/dontpanic'
e:error I/O error
it didnt reboot. do i click reboot system after flashing your file?
ItzMar said:
once i flashed it i gete:error opening 'data/dontpanic'
e:error I/O error
it didnt reboot. do i click reboot system after flashing your file?
Click to expand...
Click to collapse
I hope u are rooted and have a custom recovery installed if yes then its a script to clean wipe the rom to start a fresh install better known as dirty flash so when u flash the zip it will wipe ur cache, dalvik, system on recover and will automatically reboot to recovery then u can proceed wth any custom rom u want the latest philz recovery is recommended.i am using my phn yo reply and already 4am morning here so be sure what you are doing , give complete info of ur phn status as wht u hv done till now if u have all as mentioned abv then u r good to go and flash, but in ur case the flash of the file was not successful so u can manually wipe all mentined above and procced as instructed.
Its an instruction for custom rom and recovery if u have stock then just wipe cache and dalvik and try booting up.
Off to sleep
If you are unsure of what u r doing then try to get hands on odin and flash stock rom ,as messing up to much may damage ur pit partition
shhbz said:
I hope u are rooted and have a custom recovery installed if yes then its a script to clean wipe the rom to start a fresh install better known as dirty flash so when u flash the zip it will wipe ur cache, dalvik, system on recover and will automatically reboot to recovery then u can proceed wth any custom rom u want the latest philz recovery is recommended.i am using my phn yo reply and already 4am morning here so be sure what you are doing , give complete info of ur phn status as wht u hv done till now if u have all as mentioned abv then u r good to go and flash, but in ur case the flash of the file was not successful so u can manually wipe all mentined above and procced as instructed.
Its an instruction for custom rom and recovery if u have stock then just wipe cache and dalvik and try booting up.
Off to sleep
If you are unsure of what u r doing then try to get hands on odin and flash stock rom ,as messing up to much may damage ur pit partition
Click to expand...
Click to collapse
:angel:Saviour!:angel:
Thank you so much. All is well now. :highfive:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
Source file? Are you speaking about the rom file I downloaded ?
Yes after installing the rom there is message Updated Successfully in CWM.
But i wiped the data and cache before installing the rom and dalvik cache after installing the rom..
Please help....can you give me detailed steps for installing rom.
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Sulaimanshariff said:
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
Hey no worries...
I just installed another Xperia Z rom...and everything is grt nw....
Same Problem it is stucked now on that sceen and I too got the massage that it is install successfully... I cant install any other ROM as I want to use dual sim and most of the ROM are not compatible with dual SIM.... PLEASE HELP
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
"Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin."
can you tell me how you did?? i am a newbie
stuck in boot loop
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
yes everything went right but after i click reboot than i try to start samsung galaxy grand i9082 logo appears there it blink 4 5 times then i remove my battery and try to start again but now it is not even opening not cwm recovery menu and not going to the odin download mod also
ODIN mode is also not opening without usb cavle mean opening when plugged into charging.
please help me ,-_-,
, ,
Xperia Z Rom GT-I9082
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
yogeshp007 said:
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
Click to expand...
Click to collapse
Ik think that the CWM version is to old.
Also if you want to go to lollipop later then you can't do this with CWM 6.0.2.
Download a new CWM with an minimum version 6.4.5 or TWRP 2.8.6.0.
Never tried to install the older version roms with TWRP but with CWM I was able to install all.
Installing Rom
Sir i want to install xperia z rom please help me!!
tell me in details please
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
why you flashed it? you should have claim the warranty.
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Remove battery, sims and mmc
Wait atleast 1-2 minutes
Put all back
Now go to recovery and wipe all
Install your stable rom zip
Reboot.
It seems that your phone is bricked. I think that you are under warranty and you should go to service centre. You can also flash a custom ROM
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
how bro
Mohitash said:
Remove battery, sims and mmc
Wait atleast 1-2 minutes
Put all back
Now go to recovery and wipe all
Install your stable rom zip
Reboot.
Click to expand...
Click to collapse
flash your phone with sp flash tool work well
Sushant Rohan said:
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
Click to expand...
Click to collapse
my android one (micromax) stuck on boot animations .i cant go to boot selections......what to do ..os is marshmallow
android one stuck in boot loop.
hi,
my android one had received OTA update on 1 may. after that once due to low batt it got switched off automatically and since then it is not booting up. i tried charging it full and also tried to flash it using sp tools. but nothing happens once i click the download button. the mobile dosent detect with its battery removed also. i even tried factory reset but it didn't work.
pl help.
I have flashed custom Rom But
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
I have flashed official 6.0 after bootloop but no service(emergency call) after that.
I have also tried to install CM13 but the problem is still there
my phones warranty is over now.
please help me .
Sushant Rohan said:
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
Click to expand...
Click to collapse
My Karbonn Android One also got stuck in the bootloop.
Tried:
1) Wipe data/factory reset
2) Wipe cache partition
3) Mount/System
No improvements. Any suggestions please!!!!
Same here.. [Solved]
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Hey,
Try this... Worked for my canvas a1...
1. Install Minimal ADB and fastboot (search google)..
2. Download universal sprout 4(or 8) stock rom from xda..
3. Use philz touch recovery and wipe cache in your mobile through recovery....
4. Now install your stock rom from .zip file..
5. That's it.... Reboot and your phone is back..!
Regards,
Aashif
Ashabilash said:
My Karbonn Android One also got stuck in the bootloop.
Tried:
1) Wipe data/factory reset
2) Wipe cache partition
3) Mount/System
No improvements. Any suggestions please!!!!
Click to expand...
Click to collapse
Just flash stock rom with pc or laptop and if you have custom recovery flash stable rom it will be fixed
how!?
Can someone tell me how m I going to install TWRP even my device stuck on bootloop and can't pass on it. I try the recovery method like factory data clear participation but doesn't even work. My device is firefly mobile plss tell me
markphaul13 said:
Can someone tell me how m I going to install TWRP even my device stuck on bootloop and can't pass on it. I try the recovery method like factory data clear participation but doesn't even work. My device is firefly mobile plss tell me
Click to expand...
Click to collapse
Turn off device completely, wait for 100 seconds and connect the turned off phone to the PC. Hold the Power and Volume Up button together. You will see a menu.
1) Select fastboot mode using volume buttons.
2)On your PC download adb and extract it anywhere and navigate there.
3)open command prompt in that directory and type fastboot devices.
4)you will see serial no. Of your phone if not try reconnecting phone and letting the drivers install.
5)Using Android one toolkit Flash TWRP.
6)Flash whatever new system you want and tadaa......
Guys please help
my phone n7505 and i had rooted it
first i flashed TWRP and did factory reset and data wipe cache and dalvic cache and system
and tried to flash the ROM but it stuck at boot logo
and then tried PhilZ Touch CWM V6 and i did the same hard reset and flashed the ROM again but still the same
Stuck at boot logo
i tried several time guys
and i forgot to do Backup
I'm Fu**ed up
HeELP PLEASE :crying:
SAW MJ said:
Guys please help
my phone n7505 and i had rooted it
first i flashed TWRP and did factory reset and data wipe cache and dalvic cache and system
and tried to flash the ROM but it stuck at boot logo
and then tried PhilZ Touch CWM V6 and i did the same hard reset and flashed the ROM again but still the same
Stuck at boot logo
i tried several time guys
and i forgot to do Backup
I'm Fu**ed up
HeELP PLEASE :crying:
Click to expand...
Click to collapse
For The Note 4 Mini S6 V6 TWRP is necessary don't use Philz Touch
Have you tried to remove the battery and restart after the clean install?
I think you should start with a clean base by reflashing a Rom Stock by Odin look on sammobile.com
REroot
Reflash recovery TWRP
And reflash this V6
Perhaps THe V6 Works but I recomend V5 for the moment and waiting for the next version
I wonder..
SAW MJ said:
Guys please help
my phone n7505 and i had rooted it
first i flashed TWRP and did factory reset and data wipe cache and dalvic cache and system
and tried to flash the ROM but it stuck at boot logo
and then tried PhilZ Touch CWM V6 and i did the same hard reset and flashed the ROM again but still the same
Stuck at boot logo
i tried several time guys
and i forgot to do Backup
I'm Fu**ed up
HeELP PLEASE :crying:
Click to expand...
Click to collapse
K! by far, you also formatted and used Philz!
Now i suggest you flash Stock rom(hence stock recovery will also be added).
Then if bootloop occurs, remove battery, insert and go to stock recovery and clean cache partition and factory reset
switch on, then go to odin mode and flash philz and then Format/do clean wipe,flash Note4mini and then factory reset(format)/'do clean wipe' .
Clean steps,i hope they help!
Hit Thanks if i helped,and spread Cheers
Edit: solution added
problem:
after flashing a rom (in my case OP3lite or FreedomOS) you can't get past the boot logo
you have access to TWRP, so you can restore nandroid or flash flashable stock OxygenOS packages (tutorial here)
solution:
wipe: Dalvik /ART Cache, Cache, Data, System
flash your rom
try to boot (most likely will get stuck at boot logo)
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
___________________________________________
original post:
hi,
I'm running official OxygenOS 3.1.3.
Rooted (systemless) , TWRP installed.
I don't have any problems on my rom, but everytime I flash a rom I get stuck at the boot logo.
I can just force reboot, goto twrp and restore my nandroid backup, and my phone works fine again.
But I can't flash any rom.
tried this:
Dirty flash OP3Lite rom - stuck at boot logo
wipe and install OP3Lite rom - stuck at boot logo
Restored nandroid backup, factory format, wipe and install OP3Lite rom - stuck at boot logo
wipe and install FreedomOS - stuck at boot logo
Restored nandroid backup, factory format, wipe and install FreedomOS - stuck at boot logo
wipe, Format userdata throught fastboot, install FreedomOS - stuck at boot logo
update to OxygenOS 3.2.1 (flashable zip throught twrp)
wipe and install FreedomOS - stuck at boot logo
Both roms I tried are OxygenOS 3.2.1 stock based, my problem is most likely not due to the rom I want to flash.
Anyone knows a solution for this?
is it possible that systemless root causes this problem?
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Abaddon said:
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Click to expand...
Click to collapse
I never did format my userdata throught fastboot, so I might be encrypted.
I'll try tomorrow and let you know if that was the solution.
@Abaddon I format my userdata throught fastboot (fastboot format userdata), but still roms wont go past the Logo . any other idea?
did you full wipe?
wiped /system too before flashing a rom then u go and flash the rom + gapps if needed
how long was it at the boot logo? no animation correct?
did u advance wipe - data, caches, system instead of factory wipe, try it 3 times
I did a few wipe 3 times, still stuck at logo.
I get stuck on this logo, never reboot, just get stuck there.
I noticed that it does flash the rom, cause if I restore my nanodroid backup layers and adblock is added.
I also get zero error while flashing in twrp.
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
doesent work for me..!! any help
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Resurrection ROM 7.1.1 stuck at logo after every restore
nikhilsnigam said:
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Click to expand...
Click to collapse
Faced this issue every time I restore any nandroid on one plus 3. It stucks at rotating resurrection logot . Even tried fix contents from TWRP, no output. Please help without a functional TWRP backup and restore - phone is useless. Only everytime mega unbrick guide needs to be repeated with painful reinstall of apps
hello guys. sorry if I'm a bit slow on this topic. I'm using the the op3t A3010 version (not dure whether I'm at the right forum or not lol) Recently I updated my phone to the new 4.1.7, in which I had already rooted the phone before with magisk v12. But right after the update, as usual, the phone will unroot and yes I did root the phone back by using the magisk v13.0 version. But it failed the safety net. So after a few 'research', I installed the superuser just in case that the safety net will work this time. But this is when it all went wrong. The phone did restart back to factory settings, but the phone is not rooted (checked by using the rootchecker app) So again, I'm back to the twrp recovery, clean wipe all the data, with hope that I can start from scratch which is from installing the magisk all over again. But after this step, it stuck at the boot logo for like more than half an hour. Than at this moment, I restart my phone back to recovery mode by long pressing the power button, and when I try to install both the magisk 12 and 13 version, there is a line of error code on the screen. There's a site that says simply go to the advance setting on the twrp interface, check fix contents and ur phone will be as good as new. After done doing that, I'm now stuck with a phone with no os installed and about 38% battery left. Can anyone help me here? This is the only phone that I had :crying: Urgent help needed here guys
Unless your original installation is without storage encryption (no dm-verity) this will happen. So next time install custom rom after flashing OB22 firmware+modem, then boot patch for dm-verity followed with custom rom and gapps then boot without wipe
i have the same problem but with p9 lite : when i tried a flash lineageOS or ResurrectionRemix my phone stucks at boot logo and when i flash the original os my phone works perfectly
sorry for my english
washichi said:
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
Click to expand...
Click to collapse
How long did you wait?
washichi said:
Edit: solution added
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
Click to expand...
Click to collapse
What is the work around for CWM v6.0.5.1 Philz Touch6; it does not have Fix contexts under Advanced Functions
My issue: Tecno Spark K7 stuck at boot logo after flashing with ported ROM from Infinix XOS Chameleon . Both kernels match
This is EXACTLY my issue with the galaxy s9 plus. Gonna try the solution you wrote tommorow.
i have the same problem with galaxy s5 and the solution mentioned in the thread did not work with me.
im having the same issue but in lenovo z5 pro gt
PauloVillaflor said:
im having the same issue but in lenovo z5 pro gt
Click to expand...
Click to collapse
Search for answers HERE and if not successful, create a thread in the Q&A forum there.
You may not get any help here since this is the OP 3 forum.