Soft bricked or Hard Bricked.? Need urgent help - Sony Xperia M

Hey guys I recently updated from FXP 320 to 323 and my device is Not TURNING ONN, It just gives a heptic feed back (vibrate) and sometime it doesnt even vibrate when I press and hold power button.. Just LED blicks 3 times in RED colour when I try to power onn device..
When I connect the charger the LED turns RED and it remains red even if I charger it for 3 hours or more. When I connect in FLASHBOOT or FASTBOOT MODE THE LED SHOWS RED and the pc doesnt detedt my device. What to do now? Is my device soft bricked or hard bricked? Is there any way to bring it back to life? Plz someone help me.

It's okay, it's just soft brick. Try to re-flash bro

Vroyaloko said:
It's okay, it's just soft brick. Try to re-flash bro
Click to expand...
Click to collapse
but how bhai? When I connect my device to PC, it doesnt detect

syedafzal.shah said:
but how bhai? When I connect my device to PC, it doesnt detect
Click to expand...
Click to collapse
Maybe the kernel is not compatible with the rom. Have you tried to change the kernel with fastboot? I had the same probleb with an xpreria mini and sola but after 6-7 tries it worked on fastboot, and then with the cwm i flashed via sd card the new rom.

syedafzal.shah said:
but how bhai? When I connect my device to PC, it doesnt detect
Click to expand...
Click to collapse
just go to flashtool folder the click on the drivers and open the program then tick flashmode and fastboot and click install wait till the driver installation finishes then connect your phone to pc..
Sent from my C1905 using Tapatalk 4

alexiskap said:
Maybe the kernel is not compatible with the rom. Have you tried to change the kernel with fastboot? I had the same probleb with an xpreria mini and sola but after 6-7 tries it worked on fastboot, and then with the cwm i flashed via sd card the new rom.
Click to expand...
Click to collapse
ok I will try that.

haresh311999 said:
just go to flashtool folder the click on the drivers and open the program then tick flashmode and fastboot and click install wait till the driver installation finishes then connect your phone to pc..
Sent from my C1905 using Tapatalk 4
Click to expand...
Click to collapse
ok. I will try this and get back to you as soon as I can

If you look at the fxp change log, they've integrated the latest Sony kernel.
Sent from my C1905 using XDA Free mobile app

syedafzal.shah said:
Hey guys I recently updated from FXP 320 to 323 and my device is Not TURNING ONN, It just gives a heptic feed back (vibrate) and sometime it doesnt even vibrate when I press and hold power button.. Just LED blicks 3 times in RED colour when I try to power onn device..
When I connect the charger the LED turns RED and it remains red even if I charger it for 3 hours or more. When I connect in FLASHBOOT or FASTBOOT MODE THE LED SHOWS RED and the pc doesnt detedt my device. What to do now? Is my device soft bricked or hard bricked? Is there any way to bring it back to life? Plz someone help me.
Click to expand...
Click to collapse
it really sound like a hard bricked to mee
if u can't enter fastboot or flashmode then there's nothing u can do
now the way is to take it to a sony service centre to repair it
you need to boot repair using flashing toolbox
i heard riff box will support xperia m from july.....
anyway best of luck:good:

ManzzaShahi said:
it really sound like a hard bricked to mee
if u can't enter fastboot or flashmode then there's nothing u can do
now the way is to take it to a sony service centre to repair it
you need to boot repair using flashing toolbox
i heard riff box will support xperia m from july.....
anyway best of luck:good:
Click to expand...
Click to collapse
No, Its not hard bricked if it was hard bricked It won't Vibrate also.
Sent from my C1905 using Tapatalk 4

haresh311999 said:
No, Its not hard bricked if it was hard bricked It won't Vibrate also.
Sent from my C1905 using Tapatalk 4
Click to expand...
Click to collapse
he can't enter fastboot mode as well as flashmode
and when he connects led turns red all time
if phone is alright then led gets green when battery is full
his device is not fully dead but cannot be recovered by using a usb cable or a flashtool which can be said as a hard bricked
the only way is to repair boot using flashing toolbox which can be done only in sony repair centre..

u can try this and report..
http://forum.xda-developers.com/showthread.php?t=1849170
Sent from my C1905 using Tapatalk 4

nice thread
but my device is working great so i don't need to try that
so let the op tries the tricks and share what he gets in result :good::good:

I connected my device in flashboot mode by holdig volume up button and the LED turned blue then I extracted the boot.img file from fxp 323 and flashed it by "fastboot flash boot boot.img" and it resulted " okay
, flashing boot
finished , total time 1.953s but when i disconnect the device and try to powewr onn the LED blinks 3 times in red and the device doesnt power on? what to do now?

haresh311999 said:
u can try this and report..
http://forum.xda-developers.com/showthread.php?t=1849170
Sent from my C1905 using Tapatalk 4
Click to expand...
Click to collapse
I connected my device in flashboot mode by holdig volume up button and the LED turned blue then I extracted the boot.img file from fxp 323 and flashed it by "fastboot flash boot boot.img" and it resulted " okay
, flashing boot
finished , total time 1.953s but when i disconnect the device and try to powewr onn the LED blinks 3 times in red and the device doesnt power on? what to do now?

ManzzaShahi said:
nice thread
but my device is working great so i don't need to try that
so let the op tries the tricks and share what he gets in result :good::good:
Click to expand...
Click to collapse
I connected my device in flashboot mode by holdig volume up button and the LED turned blue then I extracted the boot.img file from fxp 323 and flashed it by "fastboot flash boot boot.img" and it resulted " okay
, flashing boot
finished , total time 1.953s but when i disconnect the device and try to powewr onn the LED blinks 3 times in red and the device doesnt power on? what to do now?

and when i connect my device using volume down button, the led blinks in red and green colour just for a second and it goes off

syedafzal.shah said:
I connected my device in flashboot mode by holdig volume up button and the LED turned blue then I extracted the boot.img file from fxp 323 and flashed it by "fastboot flash boot boot.img" and it resulted " okay
, flashing boot
finished , total time 1.953s but when i disconnect the device and try to powewr onn the LED blinks 3 times in red and the device doesnt power on? what to do now?
Click to expand...
Click to collapse
first remove your battery from mobile for few minutes then insert again
then press and hold power on button for more than 10 seconds
then remove battery again from mobile and reinsert again and now try to connect to pc in flashboot mode
and flash full firmware wiping all cache and datas
if u can enter fastboot then u can access flashboot mode as well using volume down
try and report..
---------- Post added at 06:28 PM ---------- Previous post was at 06:21 PM ----------
syedafzal.shah said:
and when i connect my device using volume down button, the led blinks in red and green colour just for a second and it goes off
Click to expand...
Click to collapse
if led blinks green and off then you are in flashmode
so first make sure flashtool is running and your firmware is ready
press flash button in flashtool and flashtool will start preparing the files
when flashtool will say connect your device
then that time you hold volume down button and connect to pc
it will detect and start to flash
:laugh::laugh:

ManzzaShahi said:
first remove your battery from mobile for few minutes then insert again
then press and hold power on button for more than 10 seconds
then remove battery again from mobile and reinsert again and now try to connect to pc in flashboot mode
and flash full firmware wiping all cache and datas
if u can enter fastboot then u can access flashboot mode as well using volume down
try and report..
Click to expand...
Click to collapse
How to flash full firmware? can I install fxp323 using flashtool? how?

ManzzaShahi said:
first remove your battery from mobile for few minutes then insert again
then press and hold power on button for more than 10 seconds
then remove battery again from mobile and reinsert again and now try to connect to pc in flashboot mode
and flash full firmware wiping all cache and datas
if u can enter fastboot then u can access flashboot mode as well using volume down
try and report..
---------- Post added at 06:28 PM ---------- Previous post was at 06:21 PM ----------
if led blinks green and off then you are in flashmode
so first make sure flashtool is running and your firmware is ready
press flash button in flashtool and flashtool will start preparing the files
when flashtool will say connect your device
then that time you hold volume down button and connect to pc
it will detect and start to flash
:laugh::laugh:
Click to expand...
Click to collapse
Where should i paste FXP 323?

Related

[Q] [B]Xperia Arc S stuck in Bootloop after flashing CM10[/B]

I tried to install CM10 on my Xperia arc s using recovery but it gave an error about the package and now it's stuck in bootloop. And now I can't access Recovery. I tried to connect it to my PC but Windows won't recognize my Device and flashtool isn't working too. I don't know what to do anymore. I'm so lost. Please help me.:crying:
Take your battery out for 10 seconds, restart the Phone and the PC and try the Flashtool again.
XperienceD said:
Take your battery out for 10 seconds, restart the Phone and the PC and try the Flashtool again.
Click to expand...
Click to collapse
I tried what you told me but still no luck. I can't enter flashmode and fastboot. No green or blue led. Any other ideas?
lance26 said:
I tried what you told me but still no luck. I can't enter flashmode and fastboot. No green or blue led. Any other ideas?
Click to expand...
Click to collapse
switch off and press the back buttton and connect via usb cable to pc

[HELP] bricked XPERIA S by silly mistake

Hello friends,
I am new (and dumb too) to XDA and all the root and all these things.
I just rooted and unlocked bootloader of my Xperia S.
and flashed the Jelly bean AOSP ROM as in following thread.
[ROM]JB AOSP 4.2.1 alpha 2
I was playing in recovery mode and I don't which option I choose but I think something like "Wipe Partitions" or "Format partitions"
After that I rebooted phone but it just went dead.
I think the battery was low (~15%) when I messed up.
Now it's not responding to anything, no boot, no recovery mode, no fastboot, no flash mode,(vol + or vol - with power) :crying:
Only thing was that I put it on wall charger at 2:00 am (no LED), at morning 10::am RED LED was strong on, but still no fastboot and flash mod e while connecting to pc :crying:
Still I kept on charging whole day ( I saw some threads regarding XPERIA S UNBRICK )
now after ~8hours, connected to pc but still detection.
Also I want to mention that When LED was on while charging and the I connected to pc , IF LED went ON , then phone not detected by computer.
and after sometime the LED went off , then Device says it connected as in screen shot below, but no fastboot or flashmode.
Please help me. Sorry for bad representation.
Hi, the i'm not a phone wizz but it happen't to me a few days ago as well. Tried everything almost bought a new phone because i thought it was bricked....
Now it's alive and kickin'.
For me worked:
Mine randomly started up till the battery was empty, 2-3min and that was enough.
Download the Emma flashtool, it's from Sony itself.
Install the flashtool and start it..let it settle.
With the red light on when it starts try to get it in plug in the usb in the phone (it's already connected in the pc) while holding the volume button down, and when you're lucky the flashtool will recognize the phone and will collect the correct software/ROM/kernel. Just hit the install/repair button and that worked for me, it installed the correct software and it was alive again...
Wish you all the luck.
koossmatrooz said:
Hi, the i'm not a phone wizz but it happen't to me a few days ago as well. Tried everything almost bought a new phone because i thought it was bricked....
Now it's alive and kickin'.
For me worked:
Mine randomly started up till the battery was empty, 2-3min and that was enough.
Download the Emma flashtool, it's from Sony itself.
Install the flashtool and start it..let it settle.
With the red light on when it starts try to get it in plug in the usb in the phone (it's already connected in the pc) while holding the volume button down, and when you're lucky the flashtool will recognize the phone and will collect the correct software/ROM/kernel. Just hit the install/repair button and that worked for me, it installed the correct software and it was alive again...
Wish you all the luck.
Click to expand...
Click to collapse
Thank you for your reply.
I did it but when connected phone with vol - , red LED was strong on , but device didn't detected by OS, nor Emma, nor with flashtool.
but after 1 minute the LED went off and at the same moment device detected in PC OS (as sound of new hardware detected sound of windows heard) and flashtool log was-
09/042/2013 22:42:12 - INFO - Device connected with USB debugging off
09/042/2013 22:42:12 - INFO - For 2011 devices line, be sure you are not in MTP mode
no response from Emma. Also no flashboot or fastboot :crying:
Have installed the fastboot drivers for your phone?
If you connect your phone with vol- or vol+ you shouldn't get a red light, it should be blue or green.
Try charge phone for a while then download a jellybean kernel (e.g. *.sin file), then adb push the kernel to the phone. Boot into recovery and refresh rom.
This will require adb and drivers both available in the flashpoint folder.
Sent from my Xperia S using xda app-developers app
o0 Matt 0o said:
Have installed the fastboot drivers for your phone?
If you connect your phone with vol- or vol+ you shouldn't get a red light, it should be blue or green.
Try charge phone for a while then download a jellybean kernel (e.g. *.sin file), then adb push the kernel to the phone. Boot into recovery and refresh rom.
This will require adb and drivers both available in the flashpoint folder.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Thank you for reply.
OK I will try. But the phone RED LED going on as a charging indicator only.
(Generally when phone shuts down at 0% battery and if we boot it up without charging, it turns on and turn off , after i fyou connect the charger, the instance the RED LED goes on but screen remains blank, After sometime the screen shows charging battery )
the same case is happening with me.
Should I remove battery, will it void its warranty?
pmsdhawale said:
Thank you for reply.
OK I will try. But the phone RED LED going on as a charging indicator only.
(Generally when phone shuts down at 0% battery and if we boot it up without charging, it turns on and turn off , after i fyou connect the charger, the instance the RED LED goes on but screen remains blank, After sometime the screen shows charging battery )
the same case is happening with me.
Should I remove battery, will it void its warranty?
Click to expand...
Click to collapse
So u can charge ur phone? It sounds like all u need to do is reinstall a kernel then a rom. No need to remove battery. If you connect urban phone to a usb,when off, and hold a volume key you should not get a red led. You get a red led when u don't have flashmode and/or fastboot.
Sent from my Xperia S using xda app-developers app
Have you tried a 'hard' reset of the phone/power.
Phone may be in a loop with power still on or some other state.
Hold the power button -and- volume up button for a good 10 seconds.
You may feel the phone vibrate once then a few seconds later it vibrates three times in rapid succession.
This should indicate the phone is powered down.
If powered down, it may then be able to recharge itself and if you're lucky show a battery charging icon.
When recharged, I'd use SEUS to reload the stock firmware.
Good luck.
Dr Goodvibes said:
Have you tried a 'hard' reset of the phone/power.
Phone may be in a loop with power still on or some other state.
Hold the power button -and- volume up button for a good 10 seconds.
You may feel the phone vibrate once then a few seconds later it vibrates three times in rapid succession.
This should indicate the phone is powered down.
If powered down, it may then be able to recharge itself and if you're lucky show a battery charging icon.
When recharged, I'd use SEUS to reload the stock firmware.
Good luck.
Click to expand...
Click to collapse
Thank you for suggestion but its not responding.
Also I unlocked bootloader so no use of SUS .
o0 Matt 0o said:
So u can charge ur phone? It sounds like all u need to do is reinstall a kernel then a rom. No need to remove battery. If you connect urban phone to a usb,when off, and hold a volume key you should not get a red led. You get a red led when u don't have flashmode and/or fastboot.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Its getting red LED because battery is not charging I think.
And can You explain the process written or a link to tutorial .
One more question
Will my warranty be void if I remove my Battery?
pmsdhawale said:
Its getting red LED because battery is not charging I think.
And can You explain the process written or a link to tutorial .
One more question
Will my warranty be void if I remove my Battery?
Click to expand...
Click to collapse
Step 1 - Download a kernel.
Download a kernel like nova (http://forum.xda-developers.com/showthread.php?p=35055975). this will Download a zip file, open the file and extract the file kernel.elf. note nova is a jellybean kernel.
step 2 - Push the kernel file to the phone
http://forum.xda-developers.com/showthread.php?p=23181182
[Xperia S][INFO][REF] All that u need to know before u begin
Step 3 - boot the phone into recovery and install a Rom zip file then reboot.
Step 4 - hit thanks.
Not sure about removing the battery. I have never need to do it.I guess it would be ok if you don't damage anything or break any security seals. Btw u know when u charge your phone when the battery is below 90% it displays a red light hey.
Sent from my Xperia S using xda app-developers app
o0 Matt 0o said:
Step 1 - Download a kernel.
Download a kernel like nova (http://forum.xda-developers.com/showthread.php?p=35055975). this will Download a zip file, open the file and extract the file kernel.elf. note nova is a jellybean kernel.
step 2 - Push the kernel file to the phone
http://forum.xda-developers.com/showthread.php?p=23181182
[Xperia S][INFO][REF] All that u need to know before u begin
Step 3 - boot the phone into recovery and install a Rom zip file then reboot.
Step 4 - hit thanks.
Not sure about removing the battery. I have never need to do it.I guess it would be ok if you don't damage anything or break any security seals. Btw u know when u charge your phone when the battery is below 90% it displays a red light hey.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Its not booting .
Nor in flashmod nor in fastboot mode. then how can I push the kernal.
Can u confirm if you have installed the fastboot drivers
Sent from my Xperia S using xda app-developers app
Same problem here. Red led, no charge. No fasboot.
Nova Kernel + Nova Rom.
o0 Matt 0o said:
Can u confirm if you have installed the fastboot drivers
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
yes, they are installed.
I connected my friend's xperia p and it detected in both fastboot and flashmod.
Trying it on ubuntu and thenafter windows 7.....
FED UP.....Going to SONY service center tomorrow.... hoping it'll get replaced .(yeahh...its still under warranty )
pmsdhawale said:
FED UP.....Going to SONY service center tomorrow.... hoping it'll get replaced .(yeahh...its still under warranty )
Click to expand...
Click to collapse
So what happened? I have the same problem.
put your device to a cool place and try install a kernel like nova
pmsdhawale said:
Hello friends,
I am new (and dumb too) to XDA and all the root and all these things.
I just rooted and unlocked bootloader of my Xperia S.
and flashed the Jelly bean AOSP ROM as in following thread.
[ROM]JB AOSP 4.2.1 alpha 2
I was playing in recovery mode and I don't which option I choose but I think something like "Wipe Partitions" or "Format partitions"
After that I rebooted phone but it just went dead.
I think the battery was low (~15%) when I messed up.
Now it's not responding to anything, no boot, no recovery mode, no fastboot, no flash mode,(vol + or vol - with power) :crying:
Only thing was that I put it on wall charger at 2:00 am (no LED), at morning 10::am RED LED was strong on, but still no fastboot and flash mod e while connecting to pc :crying:
Still I kept on charging whole day ( I saw some threads regarding XPERIA S UNBRICK )
now after ~8hours, connected to pc but still detection.
Also I want to mention that When LED was on while charging and the I connected to pc , IF LED went ON , then phone not detected by computer.
and after sometime the LED went off , then Device says it connected as in screen shot below, but no fastboot or flashmode.
Please help me. Sorry for bad representation.
Click to expand...
Click to collapse
Make sure your phone is absolutely off
Put it to a cool place like refrigerator for a couple of hours
then flash a kernel so fast by fastboot.exe
If works you can full charge your device and you are lucky.
pmsdhawale said:
FED UP.....Going to SONY service center tomorrow.... hoping it'll get replaced .(yeahh...its still under warranty )
Click to expand...
Click to collapse
Got it replaced !!
They said that they've changed motherboard !!
Again rooted and unlocked boot loader !
Using PAC ROM latest 4.2.2

[SOLVED] I think my Xperia Ion had a hard brick , any help!!!

Hi:
In the last day i was trying to flash the LEAK 4.1.2 build 6.2.B.0.203 , using DooMLork kernel , the problem was facing me is that my phone still do reboot after the first logo.
Then my phone turned off and i can't do any thing like flash mode or fastboot or charge of vibrate , even no led.
After like 4 hours of charging my phone show red led apear and disapear evry 20 second.
Today in the morning i can see a red led that still apear all the charging time and nothing happen.
From 2 minuits suddenly i saw that my phone turned on and show the first logo "Free Xperia" and after 5 second getted dead again and the same , only red led.
Any help to get into flashmood?​
Again i had the boot logo , i tried to press VPL up + Power bottom and it do restart , tried to get 3 viberates and after i had it dead again.​
Hi folks, i bricked my phone too. i was on leaked JB too and its worked like a charm. i founded an article about Chainfire so i tried but the phone went bootloop and then i red how to uninstall it. need adb mode on recovery. but the leaked twrp kernel cannot be on adb mode so i decided i flash a regular ics cwm kernel. so i flashed than tap tap tap on sony logo but nothing happened but bootloop. tried a lot times but same. so i decided i flash back the leaked twrp and flash the rom again so pressed the power and vol up until 3 vibrations it powered off and thats all. doesnt respond. cant power off cant flash mode cannot fasboot mode. now is on wall charger but nothing happen. what should i do for now? please help i love my ion especially with JB. :crying::crying::crying::crying:
edit: and its full charged because it was on wall charger while i slept :/
edit: SOLVED
i couldnt wait so i disassembled and unplugged the battery cable than plug and its working!
goodnightPal said:
Hi folks, i bricked my phone too. i was on leaked JB too and its worked like a charm. i founded an article about Chainfire so i tried but the phone went bootloop and then i red how to uninstall it. need adb mode on recovery. but the leaked twrp kernel cannot be on adb mode so i decided i flash a regular ics cwm kernel. so i flashed than tap tap tap on sony logo but nothing happened but bootloop. tried a lot times but same. so i decided i flash back the leaked twrp and flash the rom again so pressed the power and vol up until 3 vibrations it powered off and thats all. doesnt respond. cant power off cant flash mode cannot fasboot mode. now is on wall charger but nothing happen. what should i do for now? please help i love my ion especially with JB. :crying::crying::crying::crying:
edit: and its full charged because it was on wall charger while i slept :/
edit: SOLVED
i couldnt wait so i disassembled and unplugged the battery cable than plug and its working!
Click to expand...
Click to collapse
Lol i am not going to disassemble my phone. From some minuits i had my phone on and it showed Free Xperia logo but after 3 viberates i died.
I am waiting it to come on again and then i will try to flash the software without turn it off.​
The $niper said:
Lol i am not going to disassemble my phone. From some minuits i had my phone on and it showed Free Xperia logo but after 3 viberates i died.
I am waiting it to come on again and then i will try to flash the software without turn it off.​
Click to expand...
Click to collapse
phone is for you not you are for your phone... have a tutorial on youtube, and its safe if you are do it smartly. i was impatient.. its your choice, your phone.
goodnightPal said:
phone is for you not you are for your phone... have a tutorial on youtube, and its safe if you are do it smartly. i was impatient.. its your choice, your phone.
Click to expand...
Click to collapse
The reason why i don't want to do it because if i did it my phone will be cheaper because it will called "Fixed Phone".
Now i got the first logo again while it's connected to the PC , i tried to press VOL- but flashtool didn't detect it and came dead again.
Maybe the next time i can get into recovery , but what can i do?​
The $niper said:
The reason why i don't want to do it because if i did it my phone will be cheaper because it will called "Fixed Phone".
Now i got the first logo again while it's connected to the PC , i tried to press VOL- but flashtool didn't detect it and came dead again.
Maybe the next time i can get into recovery , but what can i do?​
Click to expand...
Click to collapse
if its not working now is cheaper. but you have to tell nobody that you disassembled it to fix ur phone.
but if you have time try this one:
http://forum.xda-developers.com/showpost.php?p=31618617&postcount=32
Thats what i am trying to do.
Now i get my phone on again , and i got into recovery and reboot it to fastboot , flashed stock kernel.sin.
Then i turned it on and it show sony logo then i did 3 vibrates to get it off to flash a stock rom but dead again.
Now i am thinking how to get to flashmode?​
The $niper said:
Thats what i am trying to do.
Now i get my phone on again , and i got into recovery and reboot it to fastboot , flashed stock kernel.sin.
Then i turned it on and it show sony logo then i did 3 vibrates to get it off to flash a stock rom but dead again.
Now i am thinking how to get to flashmode?​
Click to expand...
Click to collapse
that what i tried me too, flashed stock with cwm tap tap tap but nothing happened.. once is working once not... try flash stock with twrp it is working.
Last updates:
All what i can get ofter connecting to PC for a long time is the device start up and show Sony logo then the logo disapear and reboot then do it again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again then stop booting and got dead.
Edit 1: When it show Sony logo i tried to press VOL+ and connect the usb but no fastboot , the same with flash mode.
Edit 2: When it start rebooting wave again i tried to press VOL+ and - then it got stuck with black screen , Flashtool can detect it in USB debigging off mode and it can't be turned off with the 3 vibrates trick.
Edit 3: By removing the sim card the phone turned off. Now back to the first stage with only red led and after long time connecting to PC it show Sony logo then reboot.​
The $niper said:
Last updates:
All what i can get ofter connecting to PC for a long time is the device start up and show Sony logo then the logo disapear and reboot then do it again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again then stop booting and got dead.
Edit 1: When it show Sony logo i tried to press VOL+ and connect the usb but no fastboot , the same with flash mode.
Edit 2: When it start rebooting wave again i tried to press VOL+ and - then it got stuck with black screen , Flashtool can detect it in USB debigging off mode and it can't be turned off with the 3 vibrates trick.
Edit 3: By removing the sim card the phone turned off. Now back to the first stage with only red led and after long time connecting to PC it show Sony logo then reboot.​
Click to expand...
Click to collapse
I think: you should turn off but when it trying turning off it goes brick, get stuck... i dont know you have to turn off manual ( with disassemble) and connenct usb and vol up because now it cannot be in fastboot or flash mode. or you should leave it to full discharge than it will turn off but it may take several weeks.
goodnightPal said:
I think: you should turn off but when it trying turning off it goes brick, get stuck... i dont know you have to turn off manual ( with disassemble) and connenct usb and vol up because now it cannot be in fastboot or flash mode. or you should leave it to full discharge than it will turn off but it may take several weeks.
Click to expand...
Click to collapse
Now it's not stuck , it's off and connecting to the charger with red led.​
Than i don't know what should you do srry
Sent from my LT28h using xda app-developers app
goodnightPal said:
Than i don't know what should you do srry
Sent from my LT28h using xda app-developers app
Click to expand...
Click to collapse
No problem , thank you for trying help.​
Charging for 10 hours , only red led.​
while on a loop, press the volume down button and connect it to the PC. If it doesn't work, press power+vol up till it vibrates once keeping the vol down button pressed as well. if it goes into flashmode, forget everything and flash stock ftf.
on a red led situation, hold the vol down and connect it to PC. It will show no led but keep holding it for long, it will go into flashmode
Posted by Sony Xperia™ Ion via xda-premium
ARNOB said:
while on a loop, press the volume down button and connect it to the PC. If it doesn't work, press power+vol up till it vibrates once keeping the vol down button pressed as well. if it goes into flashmode, forget everything and flash stock ftf.
on a red led situation, hold the vol down and connect it to PC. It will show no led but keep holding it for long, it will go into flashmode
Posted by Sony Xperia™ Ion via xda-premium
Click to expand...
Click to collapse
I tried that to make it restart with one vibrate but no flashmode , i will try it again with holding the VOL- before i do the vibrate.
For the led when i connect it to the PC holding VOL- the red led apear , why?​
**** **** **** **** **** **** me , whn it start the rebooting i pressed the VOL+ and = and the power bottom and it start to connect and dis connect again on MTP debugging off mode and after a while i got the green led and flash mode but the ftf waz compressed and while it's extracting the green led gone....​
Fixed!!!!
This is small guide what to do:
1- Charge your phone with PC or wall charger until you get a stable red led (Stable led not flashing led) maybe that will take hours.
2- Now connect your phone to the PC , you will find the red led back again.
3- The idea now is that your phone will auto start after some time , you need to be holding the VOL- bottom before it start up that you can get a green led and you can flash the rom with flashtool.
Some times it got start up after like 4 minuits after you connect it to PC , and other times maybe it will take like 20 minuits to start. So you have to hold the VOL- bottom almost the time and there is no problem if you let the bottom for some seconds , but be carefull that it will suddenly boot up so you have to be holding the bottom.
If you success with rom flashing , connect your phone to the charger and wait until it will start first time and get dead , then start again normaly ​
Charge ur phone with wall charger (its faster than pc) until u get green led. After that, hold Vol - and connect the phone to pc.

I've got bootloop while i was updating new rom.

I updated my Xperia Ion last night. Unfortunately, my phone was shut down by itself and then it've got bootloop but it s quite different from general bootloop because, when to Sony logo appear, it takes about 20 second and slowly disappear and reboot again about 6-7 times.
I've tried to carge it and i get the red led. However, it turns on automatically and everthing happen again. So, i tried to hard reset (3 vibrate) and do wall charging but it's still the same. After that, i've tried to use rubber band for flash mode while it was charging in red LED, but my laptop can't access my phone in flash mode and it's turned on by itself again. What should i do? Thank you in advance. :crying:
Naisamui99 said:
I updated my Xperia Ion last night. Unfortunately, my phone was shut down by itself and then it've got bootloop but it s quite different from general bootloop because, when to Sony logo appear, it takes about 20 second and slowly disappear and reboot again about 6-7 times.
I've tried to carge it and i get the red led. However, it turns on automatically and everthing happen again. So, i tried to hard reset (3 vibrate) and do wall charging but it's still the same. After that, i've tried to use rubber band for flash mode while it was charging in red LED, but my laptop can't access my phone in flash mode and it's turned on by itself again. What should i do? Thank you in advance. :crying:
Click to expand...
Click to collapse
ok...do this...once in bootloop...vol+ and power button.....then connect in flashmode...make sure you are doing it correctly...vol down/up+power button...if phone connects and disconnects then problem with drivers....install drivers and start over again
Dark Wraith said:
ok...do this...once in bootloop...vol+ and power button.....then connect in flashmode...make sure you are doing it correctly...vol down/up+power button...if phone connects and disconnects then problem with drivers....install drivers and start over again
Click to expand...
Click to collapse
I got the blue LED after that Flashtool told me that i need the driver. After that, my laptop installed the driver automatically and then Flashtool informed that my device connected with not debugging mode and MTP mode. now, i see just black screen and nothing happen and i can't reset or hard reset.
Naisamui99 said:
I got the blue LED after that Flashtool told me that i need the driver. After that, my laptop installed the driver automatically and then Flashtool informed that my device connected with not debugging mode and MTP mode. now, i see just black screen and nothing happen and i can't reset or hard reset.
Click to expand...
Click to collapse
it should be green led.blue led is fastboot mode i think. you need flashmode
and a little more details. what were you trying to update before your phone got into bootloop?got an unlocked B/L or locked?
One more thing. Go to flashtool folder>driver folder>drivers.exe(or something like that). Install drivers for your device first. then go to the bottom of the list. select flashmode and fastboot drivers and install those as well
Dark Wraith said:
it should be green led.blue led is fastboot mode i think. you need flashmode
and a little more details. what were you trying to update before your phone got into bootloop?got an unlocked B/L or locked?
One more thing. Go to flashtool folder>driver folder>drivers.exe(or something like that). Install drivers for your device first. then go to the bottom of the list. select flashmode and fastboot drivers and install those as well
Click to expand...
Click to collapse
Oh, I see. But I'm also trying to access the flashmode (down volume) but it still bootloop again. Anyway, I was installing custom rom in CMW and my ION is still Locked.
P.S. I can get i nfastboot mode but not for flashmode.
Naisamui99 said:
Oh, I see. But I'm also trying to access the flashmode (down volume) but it still bootloop again. Anyway, I was installing custom rom in CMW and my ION is still Locked.
P.S. I can get i nfastboot mode but not for flashmode.
Click to expand...
Click to collapse
you have CWM>???(CWM for locked Bl i guess)
Did you take a backup???
if not...check if ROM was meant for unlocked B/L. If not,wipe cache and dalvik cache..wipe data and try...
if yes, then u have only one option. Using flashmode(green led) use flashtools to flash stock firmware
Dark Wraith said:
you have CWM>???(CWM for locked Bl i guess)
Did you take a backup???
if not...check if ROM was meant for unlocked B/L. If not,wipe cache and dalvik cache..wipe data and try...
if yes, then u have only one option. Using flashmode(green led) use flashtools to flash stock firmware
Click to expand...
Click to collapse
yup, i used CMW for locked BL
and Yes,i did.
But, my phone doesn't respond me to get into flashmode
Naisamui99 said:
yup, i used CMW for locked BL
and Yes,i did.
But, my phone doesn't respond me to get into flashmode
Click to expand...
Click to collapse
if you can get into cwm just restore the backup.
Dark Wraith said:
if you can get into cwm just restore the backup.
Click to expand...
Click to collapse
For now, i can't access CMW anymore.
Naisamui99 said:
For now, i can't access CMW anymore.
Click to expand...
Click to collapse
Then switch it off completely...Put it to charge...(one hour or so)..open flashtool...now if fastboot mode is getting connected then flashboot would also work...search in google how to enter flash mode(which key combinations)..now initialize flashing and wen it asks to plug...plug it in flash mode(make sure u are not pressing power button)..it should be vol+/- only while plugging in....and tell me what does your log say after that...
Dark Wraith said:
Then switch it off completely...Put it to charge...(one hour or so)..open flashtool...now if fastboot mode is getting connected then flashboot would also work...search in google how to enter flash mode(which key combinations)..now initialize flashing and wen it asks to plug...plug it in flash mode(make sure u are not pressing power button)..it should be vol+/- only while plugging in....and tell me what does your log say after that...
Click to expand...
Click to collapse
Actually, I've done like this before. But I stuck in fastboot mode and i can't restart it. Is there anyway to enter flashmode from fastboot? I searched it but i can't find.
Naisamui99 said:
Actually, I've done like this before. But I stuck in fastboot mode and i can't restart it. Is there anyway to enter flashmode from fastboot? I searched it but i can't find.
Click to expand...
Click to collapse
do a reset again...vol plus + power button.... and then try
Dark Wraith said:
do a reset again...vol plus + power button.... and then try
Click to expand...
Click to collapse
That way give me enter in fastboot mode (Blue LED) :crying:
Naisamui99 said:
That way give me enter in fastboot mode (Blue LED) :crying:
Click to expand...
Click to collapse
search in xda for ion...for xperia s buttons might be different
Dark Wraith said:
search in xda for ion...for xperia s buttons might be different
Click to expand...
Click to collapse
I know how to enter Flash mode in Xperia Ion but, i can't reach that mode.
Naisamui99 said:
I know how to enter Flash mode in Xperia Ion but, i can't reach that mode.
Click to expand...
Click to collapse
Ok one by one.. Tell me can you switch off the phone completely?
Dark Wraith said:
Ok one by one.. Tell me can you switch off the phone completely?
Click to expand...
Click to collapse
Yes! because i've tried for 2 ways. The first way; Let its battery die because of bootloop. And the second is use the hard reset and let the battery die.

HElp me please soft brick :_(

Hi i have flash my phone with a miui firmware and everything was ok.
i have update the firmware for error and phone power off. the bootloader was open and i have a custom recovery.
now i cant go in recovery and flashmode and flashtool doesnt see it, when i press power and volume + the phone vibrate for 3-4 times and appears a light blue led and then it power off..
i connected the phone to the pc and i press volume+ and blue led appear, is it fast mode?
how can i do?
the users of this forum are the best
Sorry for my bad english
thanks :_(
That sounds like what happened to me recently. Basically, there are two modes the phone can go in when it's booting up and the USB is connected. One is fastboot mode, where you view the blue LED, which is what you are seeing. The other one, attained by pressing the other volume key, will get you into flash mode with a green LED and will allow you to use the flashtool to re-flash a stock firmware. I'm not entirely sure, but I think it's only if your bootloader is unlocked, but you should be able to try anyway.
festizzio said:
That sounds like what happened to me recently. Basically, there are two modes the phone can go in when it's booting up and the USB is connected. One is fastboot mode, where you view the blue LED, which is what you are seeing. The other one, attained by pressing the other volume key, will get you into flash mode with a green LED and will allow you to use the flashtool to re-flash a stock firmware. I'm not entirely sure, but I think it's only if your bootloader is unlocked, but you should be able to try anyway.
Click to expand...
Click to collapse
I try to go in flashmode but i cant do it flash tool doesnt see it when i try volume - and connected the green led doesnt appear
how can i do?
for solve your problem what did u do?
Thanks
Laquari95 said:
I try to go in flashmode but i cant do it flash tool doesnt see it when i try volume - and connected the green led doesnt appear
Click to expand...
Click to collapse
If there is activity in the flashtool when you connect then it doesn't matter about the led being lit.
XperienceD said:
If there is activity in the flashtool when you connect then it doesn't matter about the led being lit.
Click to expand...
Click to collapse
flash tool recognized the phone but says "connected debug off" after i try to go in flashmode and the led become red and than becomes green but for a secondo after the led turn off
Laquari95 said:
flash tool recognized the phone
Click to expand...
Click to collapse
Then you're good to go.
XperienceD said:
Then you're good to go.
Click to expand...
Click to collapse
yes now the phone is recognized but when it appears the window with the rules for flashong the device the z1c's led becames green but the flashing doesnt start how can i do?
Laquari95 said:
yes now the phone is recognized but when it appears the window with the rules for flashong the device the z1c's led becames green but the flashing doesnt start how can i do?
Click to expand...
Click to collapse
Watch some flashtool videos.
fickeo very
XperienceD said:
Watch some flashtool videos.
Click to expand...
Click to collapse
Now the phone isnt recognized oh sh^t, when i connected to the pc compaire led red, than turn it off, pink led and it turn it off...
yesterday was recognized :_(
try sony update service
XperienceD said:
Watch some flashtool videos.
Click to expand...
Click to collapse
the step that i do:
open flas toll
open the thunder
select the firmware to flash
click flash
says preparing flashinf
it open a window with the rules of flash mode
i press volume - and plug the cable, the led is red after its becames green for one second and it turn it off but the program doesnt start to flash
what wrong i do?
Thanks
Laquari95 said:
what wrong i do?
Click to expand...
Click to collapse
Put it on charge for an hour and try again, and don't let go of the volume button until it starts flashing.
XperienceD said:
Put it on charge for an hour and try again, and don't let go of the volume button until it starts flashing.
Click to expand...
Click to collapse
thanks my phone is reborn you are crazy you are the BEST i have vharge it and i dont release the volume- button and everything go right
I have put thanks to all your post
THANKS!!!!!!!!!!!
Laquari95 said:
thanks my phone is reborn you are crazy you are the BEST i have vharge it and i dont release the volume- button and everything go right
I have put thanks to all your post
THANKS!!!!!!!!!!!
Click to expand...
Click to collapse
:good:
thanks, that helped me to get my soft brick working again!

Categories

Resources