Develop Bugs

Need help Installing CWM on i747

Its been awhile since I've done my firmware, but I'm giving my phone over to my sister soon and upgrading to a Note Edge.
I'm trying to get this phone on Likewise S5, but having a little difficulties with the older guilds to install various stuff, also all the warning on the Likewise S5 don't show up in the guide I was following for the actual installation, like stuff about bootloaders and modems (I don't know what these are), I am a techy just I'm not well versed in Cellphone Firmware talk at all, more of a PC person.
This was the guide I'm following well can't link it, its on Team android, for the likewise S5 for S3 i747
I'm Trying to install CWM Because I believe I don't have one currently installed, if I do is there a way I can find out? all I believe I have is just a oem 4.1.2 firmware that was rooted.
Almost all the CWM guides that are out have their own downloads that no longer work for the CWM that they provide, and honestly I don't wanna mess with it anymore and want to get the proper combination, I've downloaded the latest one for Samsung Galaxy S3 from the Official Clockwork mod website for Touch version, but I'm not sure how to flash "that" I know it says to use PDA on 1.85 Odin which i've tried but it just says
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<OSM> All threads completed. (succeed 0 / failed 1) (No pass or fail)
I'm not sure what I'm doing at this point and could really use some help, specific to what I'm doing.
And to be specific I have a Samsung Galaxy S3 i747 From Rogers Wireless in Canada (Sept 2012), and it isn't bricked have booted it up just fine.
Currently I am dealing with a finnicky USB port as well, need to get some alchohol and see if I can get a more reliable connection out of it. I got it to point now I feel like I'm comfortable flashing it just eh, could be better, long as its sitting generally its connected slight pressure in cord to be sure, usually charges no problem but USB connectivity is whats finnicky. I cleaned out the lint with a needle didn't really seem to help a whole lot but definetly lets the plug go in further now, even bought a new cord that gets a decent click but it still a little floppy side to side, feels like its the plug has room to move inside the female end of the plug, vs anything being "loose"

Any chance your phone is already rooted? Odin flashing anything with a flaky USB port would make me a little nervous.
If you're rooted, there's an app called flashify that makes updating recovery pretty simple and there is no USB connection needed.
Also in the Play store if you search for Samsung Phone Info you should find an app that will tell you what firmware you're on. Install it and report back what it tells you you're on for bootloader and baseband and someone here should be able to chime in on whether it will run newer roms ok, or how to proceed if its out of date.

jason2678 said:
Any chance your phone is already rooted? Odin flashing anything with a flaky USB port would make me a little nervous.
If you're rooted, there's an app called flashify that makes updating recovery pretty simple and there is no USB connection needed.
Also in the Play store if you search for Samsung Phone Info you should find an app that will tell you what firmware you're on. Install it and report back what it tells you you're on for bootloader and baseband and someone here should be able to chime in on whether it will run newer roms ok, or how to proceed if its out of date.
Click to expand...
Click to collapse
I am already rooted I know that I did the root myself, to get Super admin permissions for the Ps3 controller blutooth controller permissions.
I'll look into Flashify, I'll install phone info now

Ok here is from my Samsung phone info app;

DMF1 firmware is pretty out of date. Unless you pick an older build of a custom rom, you'll run into some issues.
The full Canadian carrier updates for i747m are all available for download from sammobile.com, but those will be really big files to flash with Odin. I wouldn't try that unless you're really confident in that USB port. This won't be a really quick flash and interrupting it could brick your phone.
The safest route might be to unroot the phone and take carrier OTAs until your firmware is up to date. You'll have to be on stock recovery for OTAs. Once you're unrooted if you power down and reboot your phone, I'm pretty sure the stock recovery will come back. If not, here's a link to a stock recovery: http://forum.xda-developers.com/showthread.php?t=2026751
To get going with rooting and custom roms again you'll have to flash a custom recovery in Odin once you get up to date on OTAs, but that will be a 5 - 10 MB file to flash as opposed to a 1 GB+ full system update. Don't worry about that until you get the bootloader and modem up to date, one step at a time. :good:

How do I perform an update though to manually update the phone, like to unroot it basically I'm Connecting it to USB getting it to recognize in Kies?
Like I have full USB access to my phone now, yes the port is flaky but it functions. Kies says my device is on latest firmware even though I know 4.4.2 was released by rogers for the device, i.e I don't understand how to unroot it and bring it up to date
I don't know what a OTA is, I don't understand what a modem/bootloader is etc.
I'm assuming what I have to do is update it to 4.4.2 via the normal firmware but currently it isn't giving me an option to

OTA is "over the air" updates. They are pushed to your phone and often update your phone's bootloader, modem, and rom to new versions. They'll download and install with wifi or cell data, no USB connection required. It is a very safe way to update your phone, but OTA updates will fail if you are rooted and have custom recovery (at least AT&T's will).
With android 4.1 and DMF1 firmware you're something like 2 or 3 updates out of date. Usually OTA notifications just pop up on their own, or you might have a "check for updates" option somewhere in your rom settings. Has this phone been off the grid for a while, update process frozen, or just declining OTAs for the last year and a half or so? Is it not tied to a carrier anymore?
I have updated bootloaders and modems outside of the OTA process, but only on the i747 AT&T variant. If OTA is not an option for some reason, I can't comment on what your safest route would be on the Canadian variant, but there are plenty of expert i747M users on here. Someone will chime in to help you out.
If OTA is an option, then the easiest way to unroot used to be to install SuperSU from the Play store, if you're not already using it. In SuperSU settings there used to be a "full unroot" option.

Ok So what do I need to do exactly I unrooted the phone no problem but it still doesn't recognize it as needing new firmware still so I'm still confused how to update it.
My understanding is I need to update this to latest base version which would be 4.4.2, but I'm not sure how to do that exactly since its not automatically doing it given the custom rom.

Confirm the bootloader on your phone and post it here.
It is the bootloader that will determine which stock firmware to flash from sammobile.com onto your i747m.

audit13 said:
Confirm the bootloader on your phone and post it here.
It is the bootloader that will determine which stock firmware to flash from sammobile.com onto your i747m.
Click to expand...
Click to collapse
Again, I'm not well versed in android terminology etc, I don't really know what a bootloader is, everything in those screen caps above is what I'm using

If you want to be on the latest stock, just use Odin to flash the stock Rogers 4.1.1 ROM from sammobile.com. Then use OTA updates to update the phone to the latest KK.

audit13 said:
If you want to be on the latest stock, just use Odin to flash the stock Rogers 4.1.1 ROM from sammobile.com. Then use OTA updates to update the phone to the latest KK.
Click to expand...
Click to collapse
Again, I Really Need more details Odin isn't so simple that its Oh Slot dis dat flash in der and poof completeo, if you read through the thread you'd you I have a flaky USB port that isn't 100% stable, flashing a 1gb rom through a iffy connection doesn't sound smart.
How do I flash this correctly from SD card if I can?
Please describe, Which App I need for it, what I need to do in app etc, cuz Odin is like AD AP DS WE aslaksd its all gibberish to me unforunately for different flashing locations

I know of no way to flash a completely stock ROM from an SD card.
If you wanted to flash it from an SD card, you would probably need to download the entire ROM, strip out the stock recovery, and re-pack the ROM into a zip file.

I'm still extremely confused, I need consise directions what I need to do, so far I haven't had solid details in this thread yet how to get my firmware installed :crying:

Evockzi said:
I'm still extremely confused, I need consise directions what I need to do, so far I haven't had solid details in this thread yet how to get my firmware installed :crying:
Click to expand...
Click to collapse
since youre computer literate , so to speak , perhaps this method would help/be more 'simple'. IDK , just a thought.
http://forum.xda-developers.com/showthread.php?t=2225405
"all i can really do , is stay out of my own way and let the will of heaven be done"

Is that method compatible with my device? before I've only been following ones that flash with odin.
The Reason why the isn't helpful immediately for me, I Do Not Know what I need to Do to achieve what I need.
Bootloader means almost nothing to me, I do Not know what I need to accomplish, No one has answered that question yet for me.
My Question is again, So, Do I need to install 4.4.2 Base as downloaded from that Samsmobile, and How Do I install Specifically that?
Beyond That my question expands into, Ok After I install that What do I need to do to install likewise.
I Do not know what I need to do so all these guides about doing specific tasks that you know what you need to do are useless to me at this moment I'm afraid.
I have enough of a stable USB connection I can Odin it Right now I just need to know what to select, etc

I yolo'd it with the connection, and flashed it with older odin 1.85 since I know PDA is the correct one idk what the hell it is in the new odin.
Passed, took almost 8 mintues to flash it, Now I just need to get back to original question of installing CWM Recovery and Getting Likewise S5 rom installed.
Do I have correct 4.3-4.4 Modem and boot loader that it spams in bright red on the likewise requirements?

Managed to finish all the installations without a hitch,
Followed a guide to CWM install and then root it through installing SuperSU, Then had everything to install Likewise which can be done on the device.
Everything installed perfect now I have a S5 to give to my sister cheers

@Evockzi glad you got it figured out.:victory:
"all i can really do , is stay out of my own way and let the will of heaven be done"

Seriously need some help. At the end of my patience with trying to update this thing

I'm really frustrated. I've been trying to update this Galaxy S3 for days now with no success. Currently I am running on Slimkat 7.0. It's sometimes slow and buggy and needs some updating.
For reference, this is the phone at its current state:
- Bootloader: i747ucalh9 (literally taken from the fail message when trying to update to any other bootloader)
- Modem/firmware (?): I747UCLH9
Here's what has happened, greatly summarized (note I'm using CM6.0.4.7 for all of these operations, and when I say "update", I mean "flash"):
- I tried updating to Slimkat 9 but received no signal. I gave up on it entirely for a while
- I tried installing various LP ROMs, including CM12.1.
- I had 12.1 running for a bit, but I had no connectivity. LTE, 3G,H+ nothing.
- I tried installing a newer modem (this thread. Finally at MJB, I could actually get connectivity in some of the newer ROMs (including Slimkat 9)... but it was very erratic. It would just randomly oscillate between LTE and 3G and H+. This also broke CM12.1 entirely.
- Again, the above problem was always present. Most of the LP ROMs would just bootloop me, though. The only one that worked was Cyanide L... which I didn't really like.
- I thought maybe the issue was the bootloader. My bootloader is still i747ucalh9. So I tried updating it to various bootloaders from here, but none of the updates will work. Literally, they give me error 6 or 7 and pretty much essentially tell me that I can't do it.
- So after repeating the cycle of "let me try to update this" several times and having the update fail on me, I'm still stuck at Slimkat 7 as the only thing that worked on LTE (note the past tense). Worse yet, I tried simply downgrading my modem to match my current bootloader version, but that made things worse than better. I am now stuck at 3G... which just recently went back to LTE. Talk about erratic.
- I also tried going full stock by flashing this: http://forum.xda-developers.com/showthread.php?t=2363882 But it expects 5 arguments for format, and got 3... or something. Failed hard.
So, I'm pretty much at the end of my rope here. I really might just go and grab a new phone at this point. I just really don't want to because this thing still works fine.... I guess I got unlucky and am at a version of the bootloader that is difficult to update from. I can't seem to go anywhere with this thing. Anyone have any ideas? Do I need to use a different recovery?
Thanks...

First and foremost, verify your bootloader. Install the Samsung phone info app, or in a terminal app or adb shell enter:
Code:
getprop ro.bootloader
If you're on any of the older bootloaders (the ones that do not end in MJB, NE4, or NJ1) there are two ways you can go (you probably will be given the age of your modem). If you're on any of the ones that end in MJB, NE4, or NJ1 you've got to be a lot more careful because downgrading them will hard brick your phone (Odin back to stock is not an option anymore).
Option 1: If you're on the older bootloaders, you can go to sammobile.com, grab the 4.1.1 firmware from there and flash it with Odin. Do not do this if your bootloader ends in MJB, NE4, or NJ1 (can't stress that enough). This will reset your phone completely to stock. You should now start getting OTA updates. They will be incremental updates, you'll have to take at least three or four to get up to date on bootloader and modem and they're big downloads. They will come every 24 hours, but you can cheat that by setting your system time forward 1 day to make them a little more rapid fire. This is a nice, safe way to get your firmware current. Once you're up to NJ1 firmware you can use Odin to flash a custom recovery and get back to custom ROMs; I'd recommend TWRP 2.8.6 if you're going to be flashing newer ROMs as CWM and Philz aren't as up to date and sometimes give problems with newer ROMs.
Option 2: I'm pretty sure your version of CWM is a big part of your problem. If you're going to be flashing lollipop you ought to update your recovery to TWRP 2.8.6; easiest way to get it is just use the Flashify app. I'd get that recovery up to date before messing with bootloaders too. Next get your firmware up to date. If your bootloader version is before MJB, then you have to start with MJB. Then update to NE4. Then update to NJ1. It has to be done incrementally, and the bootloader and modem must match on the newer firmwares, or you'll hard brick. This thread has recovery flashable MJB and NE4 bootloaders/modems; the bootloader and modem are packaged together in the same zip so you can't get out of sync. This thread has recovery flashable NJ1 bootloader/modem. This will get your firmware all up to date, and data should start behaving on newer kitkat and lollipop ROMs. This route is a lot more risky than the OTA route described above because of all the manual steps you have to take, but you could get it done quite a bit faster if you're confident in your abilities. Just read those linked threads very, very carefully and make certain you understand.
Good luck.

jason2678 said:
First and foremost, verify your bootloader. Install the Samsung phone info app, or in a terminal app or adb shell enter:
Code:
getprop ro.bootloader
If you're on any of the older bootloaders (the ones that do not end in MJB, NE4, or NJ1) there are two ways you can go (you probably will be given the age of your modem). If you're on any of the ones that end in MJB, NE4, or NJ1 you've got to be a lot more careful because downgrading them will hard brick your phone (Odin back to stock is not an option anymore).
Option 1: If you're on the older bootloaders, you can go to sammobile.com, grab the 4.1.1 firmware from there and flash it with Odin. Do not do this if your bootloader ends in MJB, NE4, or NJ1 (can't stress that enough). This will reset your phone completely to stock. You should now start getting OTA updates. They will be incremental updates, you'll have to take at least three or four to get up to date on bootloader and modem and they're big downloads. They will come every 24 hours, but you can cheat that by setting your system time forward 1 day to make them a little more rapid fire. This is a nice, safe way to get your firmware current. Once you're up to NJ1 firmware you can use Odin to flash a custom recovery and get back to custom ROMs; I'd recommend TWRP 2.8.6 if you're going to be flashing newer ROMs as CWM and Philz aren't as up to date and sometimes give problems with newer ROMs.
Option 2: I'm pretty sure your version of CWM is a big part of your problem. If you're going to be flashing lollipop you ought to update your recovery to TWRP 2.8.6; easiest way to get it is just use the Flashify app. I'd get that recovery up to date before messing with bootloaders too. Next get your firmware up to date. If your bootloader version is before MJB, then you have to start with MJB. Then update to NE4. Then update to NJ1. It has to be done incrementally, and the bootloader and modem must match on the newer firmwares, or you'll hard brick. This thread has recovery flashable MJB and NE4 bootloaders/modems; the bootloader and modem are packaged together in the same zip so you can't get out of sync. This thread has recovery flashable NJ1 bootloader/modem. This will get your firmware all up to date, and data should start behaving on newer kitkat and lollipop ROMs. This route is a lot more risky than the OTA route described above because of all the manual steps you have to take, but you could get it done quite a bit faster if you're confident in your abilities. Just read those linked threads very, very carefully and make certain you understand.
Good luck.
Click to expand...
Click to collapse
Thanks a lot for the help! I actually did/tried a majority of this an hour or two before you posted that, except the latest firmware update link you supplied. I knew it existed and I had seen that thread before, but I couldn't dig up the link again before I had to go to work. Thing is I kind of wanted to avoid Odin for some reason but I finally gave up and used it. And yeah I already knew my bootloader version. The phone told me when it failed to update the bootloader lol.
Here's what happened thus far:
- I used Odin to flash the sammobile 4.1.1. The flashing worked just fine, but booting into it did not. It hung on the Samsung logo. So, OTA updates were out the window.
- I have no idea why, so I just used Odin to flash TWRP onto it afterwards (from here)
- I tried one of the ROMS. Data still didn't work.
- I used the thread you linked to update to MJB bootloader and whatnot. The update went fine.
- Tried another few ROMs. Data worked, but LTE was still erratic.
- Updated to NE4 and then grabbed the deoxed stock ROM.
- The deoxed stock rom failed to boot (stuck at ATT globe logo). For some reason my phone can't use stock ROMs.
- So again used Odin to put TWRP onto the phone
- Installed various LP ROMS. Again the data was erratic and plus the battery life was horrid.
- Tried getting the ktoonsez kernel. My service was murdered.
- Gave up on LP. Tried Slim 9.0. Erratic data.
- Tried Liquidsmooth 4.4.4 instead.
Currently that's kind of where I'm at. The LTE data works fine (takes a bit to get up and running after reboot though) and thus far everything is okay (though that can quickly change considering I haven't done much of anything), so I don't even know if I want to mess with it anymore. It looks like this specific ROM includes a custom kernel. So I'm guessing it's an incompatibility between the kernel and the firmware version on the other ROMs. It seems like most of the LP roms have horrible battery life (back of my phone feels like a furnace on them), so I'm not even sure if I want to do that last firmware update to use them.
It'd be kind of nice to use the OTA but apparently my ability to go stock in any form or fashion is just totally borked.
Thanks for the post though, that's pretty gold. I'm sure someone in a situation like me where they have a super old firmware will find this thread of some use as it has actual instructions and links to what you need to do to get up and running. Before you posted that, I had to go digging around pretty much everywhere figuring out what and where was going wrong.

Glad you've got it mostly working.
You might have been able to get that stock ROM to boot if you had booted into the stock recovery and run a full wipe. Touchwiz ROMs can be tough to get running after being on AOSP. As a general progression try to format internal storage with TWRP (the wipe where you have to type "yes" to confirm), if that doesn't work try a wipe with Philz, and if that doesn't work nothing, not even Odin, is effective as a wipe in the stock recovery.

Thanks for typing all this out I believe it will help me put cm12.1 official on a friends phone.
Are these the steps?
1) verify latest software
2) twrp via Odin
Alt 2) root via apk then use rashr or similar to flash twrp
3)wipe
4)In twrp install official d2att from cm website
5) install current gapps
6) profit
I'm not new to this at all but I've never even touched an att gs3 and I know most devices have their quirks and I don't want to brick.
Also does towel root work on this? I don't mind Odin but I can do this on the fly I think if I can attain root.
Sent from my DROID RAZR M using XDA Free mobile app

mrkhigh said:
Thanks for typing all this out I believe it will help me put cm12.1 official on a friends phone.
Are these the steps?
1) verify latest software
2) twrp via Odin
Alt 2) root via apk then use rashr or similar to flash twrp
3)wipe
4)In twrp install official d2att from cm website
5) install current gapps
6) profit
I'm not new to this at all but I've never even touched an att gs3 and I know most devices have their quirks and I don't want to brick.
Also does towel root work on this? I don't mind Odin but I can do this on the fly I think if I can attain root.
Sent from my DROID RAZR M using XDA Free mobile app
Click to expand...
Click to collapse
Yep. You've got it. If you're on the latest and greatest firmware I think the towelroot exploit has been patched, unless geohot has retaken the lead in that arms race.
Easiest way to root on this phone since the bootloaders are unlocked is to just use Odin to flash a custom recovery then use the custom recovery to flash SuperSU. There's just a little trick to it. Store SuperSU.zip somewhere on your phone before flashing the custom recovery. Uncheck everything but f.reset time when you use Odin; don't let it auto reboot. Upon success pull battery. Replace battery and boot straight into recovery with vol up + home + power. If you mess up and boot into unrooted stock ROM with a custom recovery it will get overwritten with a stock recovery and you'll have to Odin custom recovery back onto it and try again.
I would do this to root your stock ROM just to execute this command in a terminal app or adb shell before any more serious flashing:
Code:
su
reboot nvbackup
That fixes a derp and gives you a working efs backup on a few backup partitions built into your phone instead of a blank one. Highly recommended before doing any ROM flashing. This will just look like a pretty normal reboot. You might see a quick flash of tiny blue text if you're watching for it.
Then you're ready to make a nandroid backup (just in case), wipe, and flash away. Take a look at LiquidSmooth if you're looking for a good lollipop ROM.

Nice... So the recovery partition gets rewritten every boot up until a custom ROM is installed and the efs can disappear... This is why you always ask questions.
Thanks for the suggestion on the ROM but I think I'll stick to official cm12.1 it's not my phone and that should be a nice readily updatable bland flavor of lollipop.
Sent from my DROID RAZR M using XDA Free mobile app

mrkhigh said:
Nice... So the recovery partition gets rewritten every boot up until a custom ROM is installed and the efs can disappear... This is why you always ask questions.
Click to expand...
Click to collapse
At the Android 4.3 update it was noticed that flashing a custom recovery would be overwritten by the stock recovery on the initial reboot unless following the method Jason described. Another solution was to delete two lib or .so files. On devices still on stock recovery, stock recovery does not overwrite itself.
There is a blank EFS partition on the device intended for a backup. The nvbackup command populates that partition with an image which will rebuild your EFS if it is lost during a modem update or ROM flash. The loss of EFS does happen. I believe wanam, of the xposed module fame, created an EFS backup tool for Samsung devices. I don't believe he updates it any longer because he rolled the functionality into a partition backup tool, the later is in the PlayStore listed under a different creator name, yet it's still him.

So I'm finally going to take the plunge, and update my boot loader/modem.. I never messed with it because all the Roms I used always worked.. I want to try lollipop, but due to old bootloader my phone won't boot with those Roms..
I'm on UCDLK3 bootloader/modem.. I know I have to upgrade to MJB, NE4, then NJ1 in that order in increments..
So my question: can I upgrade from LK3 straight to MJB with out any problems?? Or is there something I need to flash before I can get to MJB?? I think I can go straight to MJB, but better safe then sorry..
I know downgrading after upgrade most likely will brick.. Any information is appreciated... Oh, its an ATT I747..

coolwhipp420 said:
So I'm finally going to take the plunge, and update my boot loader/modem.. I never messed with it because all the Roms I used always worked.. I want to try lollipop, but due to old bootloader my phone won't boot with those Roms..
I'm on UCDLK3 bootloader/modem.. I know I have to upgrade to MJB, NE4, then NJ1 in that order in increments..
So my question: can I upgrade from LK3 straight to MJB with out any problems?? Or is there something I need to flash before I can get to MJB?? I think I can go straight to MJB, but better safe then sorry..
I know downgrading after upgrade most likely will brick.. Any information is appreciated... Oh, its an ATT I747..
Click to expand...
Click to collapse
Since you are on LK3 you may want to considr applying the free sim/carrier unlock method before upgrading; that is if you are on stock LK3 and you have not previously carrier unlocked your device.
There was an OTA release for the MG2 stock ROM, I believe that was 4.1.2. You may want to go to that before MJB. Did you make the nvbackup suggested by Jason?

Why would I do a carrier unlock, if I'm not switching carriers?? And if I do it, will I be able to use the same carrier?? Just seems like a waisted step for me.. But idk..
Jason's first post, option 2 is how I was planing to update.. And no, I haven't done the nvbackup yet.. How would I apply that backup if things go wrong? Not really sure what a nvbackup is..
Any information is appreciated..

coolwhipp420 said:
Why would I do a carrier unlock, if I'm not switching carriers?? And if I do it, will I be able to use the same carrier?? Just seems like a waisted step for me.. But idk..
Jason's first post, option 2 is how I was planing to update.. And no, I haven't done the nvbackup yet.. How would I apply that backup if things go wrong? Not really sure what a nvbackup is..
Any information is appreciated..
Click to expand...
Click to collapse
There is a command to manually trigger the restore routine. I think it's
Code:
reboot nvrestore
but don't hold me to that. I'd never execute that command except if in dire need. The problem with this phone is there is an automatic routine that can be triggered in the event of a bad flash that will overwrite your nvram with the backup, even if the backup is blank. I don't think the backup stores anything modem specific, but I've never been able to confirm that. So I've always done it again after updating modems (only had to once).
Having the phone sim unlocked can be nice if you plan on traveling internationally. Otherwise, potential future carrier hopping or added resale value are the only reasons to do it.

coolwhipp420 said:
Why would I do a carrier unlock, if I'm not switching carriers?? And if I do it, will I be able to use the same carrier?? Just seems like a waisted step for me.. But idk..
Jason's first post, option 2 is how I was planing to update.. And no, I haven't done the nvbackup yet.. How would I apply that backup if things go wrong? Not really sure what a nvbackup is..
Any information is appreciated..
Click to expand...
Click to collapse
If you will never be switching carriers, nor ever sell/give/trade the phone to someone who will switch, then it is an unecessary step to do the carrier unlock.
I see Jason beat me to answering both of your questions.

[Q] Frustrated Xperia Z1C T-Mobile UK owner.

Hi,
I have the CDA 1280-7858 Sony Xperia Z1 Compact model. I have yet not been able to upgrade my phone to latest lollipop, since T-mobile UK have not released it yet.
My phone is carrier unlocked, but bootloader CANNOT be unlocked, this leaves no possible way for me to add a custom rom , right?
What are my options here? Sit and wait forever or just get a new phone?
As you can see in the attachment, only T-mobile remains on the 14.4.A.0.157 release in the UK carriers.

You can always flash stock or custom stock based lollipop from some other region. You don't need unlocked bootloader for that. There are a couple of them prerooted+dual recovery in general z1c forum.

templeka said:
You can always flash stock or custom stock based lollipop from some other region. You don't need unlocked bootloader for that. There are a couple of them prerooted+dual recovery in general z1c forum.
Click to expand...
Click to collapse
Ok, but this would erase my phone completely right? i would use flashtool to upgrade?
Is t here any reason why its taking so long to get the OTA update? I mean, optimally, i want that one and not really need to bother to reset the phone entirely for this update.

You can always make a backup in recovery (I'm thinking you have a recovery already) just in case you don't like lollipop (I didn't). You lose any app installed and preferences (for sms u can backup those and contacts you can sync with Google account) so you will have to reinstall those. If you want root for your phone you need one of those prerooted ones and those are flashed from recovery usually. Best thing is to read the instructions in those threads.

I don't have recovery mode i think. Since this comes with unlocking bootloader, which i CANNOT on my phone.. (its not possible, not even paid with jinx13).

You don't need unlocked bootloader for recovery. Just go here http://nut.xperia-files.com/ and browse to XZDualRecovery > XZDualRecovery 2.8.15 > Z1C-lockeddualrecovery2.8.15-RELEASE.installer.zip and install that from your PC (with the phone connected to your PC via USB). I think you need to enable USB debugging before doing this and you definitely have to be rooted. You should read around how to install stuff there are some guides and resource threads in General forum.
Edit: Also get the flashable version and store it somewhere safe on your phone. Anytime you flash a new ROM you need to also flash the recovery else you have to connect phone to PC and do the install version and that takes longer.

Thanks templeka, I have been unsuccessful in any attempt to root this phone also.. What would be the best way? it just seems to be locked in all ways possible for me to get this done.
edit: i tried the towelroot selection 3 from file you suggested.. it just stopped after libdvm opened (loljavasucks), and after reboot, i was unable to enter recovery mode. (pressed volume up or down, and there was no light on any diode, at any time)

You need to flash a stock .108 rom, root and install dual recovery.

Towelroot will not work on v157. Follow the guide here http://forum.xda-developers.com/showthread.php?t=2977774
In short you need to flash v108 kernel, root and flash v157 kernel back with Flashtool. Be sure to install the necesary drivers after installing Flashtool (they are in the folder where you installed it).

Sorry for being noob still.. But how do i enter flash mode now? I mean reboot and holding volume down will only enter Safe Mode of the phone. (i think its because i have the wrong kernel?)

Just when i was about to give up.. 14.5.A.0.270 just released on t-mobile.. FINALLY!

Help new to this!

Hi guys and girls i am from the uk (england) and got my g4 about 4 months ago.
Fed up of lg's stock rom and how its very laggy and irritating to use now.
I have been looking everywhere about rooting the phone and installing custom roms to make it much better and more enjoyable to use.
But i am stuck i dont know whats the best way of rooting this phone i have tried booting it into stock recovery mode but it just dont work.
so can you guys please point me to a right good method of rooting and installing custom roms please?
Currently using android 5.1 on lg stock rom
Many thanks!

Take it that is a no haha

Well every phone has a different model number so I can be hard I soft bricked my phone were system ui stopped finally got bliss pop running I would go for cyanamod 12 or something

mrnoxx said:
Take it that is a no haha
Click to expand...
Click to collapse
Have you unlocked your bootloader ?

No not too sure how to do that. Any good threads you guys reccomend.
Many thanks

So I know this is scary for you and because it is something new, therefore be sure that you want to live with the responsability if something goes wrong.
Now, the next forum thread tells you how to flash an already rooted image BUT, and this is very important, this works only if you have the version 10c installed (Check in About Phone>Software Version)
http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765
If you have the latest version of the software (20a) the best thing is to unlock your bootloader, void your warranty in the process, and flash a custom recovery. After that, you just need to flash the SuperSu zip file and you will have root.
To flash custom ROMs, just access recovery and flash the zip file of your ROM.
I'm using the unofficial CM13.0 and works very good for me, but I do miss the official camera app.

Thankyou very much for your advice okarr. Will look into this

[HELP] Note 4 N910P looking for 6.0 firmware incl recommendations to download

Good day all. I have rooted my Sprint Note 4 N910P (just to remove the bloatware) and did not get the 6.0 update. The error message from my phone's system update states to "...use Samsung Smart Switch to update using my computer".
However, I find that Kies is the most preferred method, if not all (aside from Odin), used to update to 6.0 via computer.
Could I get some feedback on which method is best and where would I get the 6.0 firmware as I have found a few but don't know how reliable these are in trying to avoid any problems.
Much thanks in advance.:good:

Smart Switch has replaced KIES as far as Samsung is concerned. It is a Samsung preferred way to update a phone, but I don't know if it will like a modified device. I think it has an emergency recovery mode that will do it.

Reivaj1803 said:
Good day all. I have rooted my Sprint Note 4 N910P (just to remove the bloatware) and did not get the 6.0 update. The error message from my phone's system update states to "...use Samsung Smart Switch to update using my computer".
However, I find that Kies is the most preferred method, if not all (aside from Odin), used to update to 6.0 via computer.
Could I get some feedback on which method is best and where would I get the 6.0 firmware as I have found a few but don't know how reliable these are in trying to avoid any problems.
Much thanks in advance.:good:
Click to expand...
Click to collapse
I'm gonna keep this brief as I'm assuming since you have a rooted device that you somewhat know the basics of what your doing.
I personally would start fresh.
First completely back up your phone.
Second Then download Odin and the current stock Rom from here: http://forum.xda-developers.com/note-4-sprint/general/stock-tar-odin-flashable-t3250864 (If you want Stock Rom)
Or you can use this to download Rom from Samsung http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Third Flash Rom and root and debloat by which ever way you did before. (Assuming Titanium Backup)
I am by no way an expert and there might be a better way but I like having clean installs. Just make sure to research anything you don't know or are unfamiliar with.
Here's super su thread I use for Root: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Always give thanks to Devs and threads.
As I stated this are just brief outline of steps I would take. Hope it helps. Good day sir!

Root, Twrp, flash ApocalypseX_MM 8.1.0 and Kernel Flashpoint 4.3 beta.
So far no problem and running smooth with best battery life