Develop Bugs

eastlink sghm919v Canadian s4 keeps failing when flashing stock Rom.

Hey fellow sgh-m919v owners in Canada!
Need some help here!
I am trying to Flash my eastlink wireless sigh-m919v back to stock and uproot it but it keeps failing in different times depending on the Rom I'm flashing.
On the older firmware I downloaded from sammobile.com it almost finishes then gets to modem.bin and says fail(auth) with a big red fail sign. On the phone it says secure check fail:mdm
When I try the newest one it doesn't even want to start. Odin starts then fails right away stating. Fail at sbl2.Mbn and Secure check fail: sbl2 on the phone.
Note when I go into download mode it does state that my phone is a sghm919v, current binary custom, system status custom, csb-oem_config_lbs:0x38 or 0x30. Too small to tell.
Note. I'm able to install custom roms and recoveries fine but not stock roms.
What am I doing wrong? Can someone give me step by step instructions? I'm using a Partially installed stock Rom and want it to be fully installed.
Any help is appreciated

Are you sure you are using the correct Rom...???
There is always the possibility the OS (operating system) you are attempting to install is not the correct one, and thus producing a conflict, and also a negative out come.
Can you post your Model, Make and Carrier, possibly the weblink where you are getting you update from.
Just to get a second opinion, and rule out that you are indeed getting the right download. As each Carrier is hardware sensitive, as to the type of Android OS it supports...

Well im not 100% sure im using the right one but 98% sure I am using the right one.
My phones downlosd mode says its a sgh-m919v. Canadian model of t mobile m919
I got the roms from sammobile.com
I used the firmware ending in esk thinking that meant eastlink but yesterday I doenloaded the wind, mobilicity and videotron versions of samr ftimware to see if yheres any differrnce.
Have yet to try. Will try soon

mikeogden198181 said:
Well im not 100% sure im using the right one but 98% sure I am using the right one.
My phones downlosd mode says its a sgh-m919v. Canadian model of t mobile m919
I got the roms from sammobile.com
I used the firmware ending in esk thinking that meant eastlink but yesterday I doenloaded the wind, mobilicity and videotron versions of samr ftimware to see if yheres any differrnce.
Have yet to try. Will try soon
Click to expand...
Click to collapse
Try to see if you can get your product code
http://forum.xda-developers.com/wik..._Galaxy_S_Series#How_To_Find_Product_Codes.3F

baseballfanz said:
Try to see if you can get your product code
http://forum.xda-developers.com/wik..._Galaxy_S_Series#How_To_Find_Product_Codes.3F
Click to expand...
Click to collapse
download mode states that my product code is a sgh-m919v

just tried flashing the other m919v firmwares from wind, mobilicity and videotron, no luck - fails at modem.bin. whats going on why does it keep failing. very frustrated

this is where it always fails:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919VVLUAMDJ_M919VYVLAMDJ_M919VVLUAMDJ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> persdata.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

bump! any help would be greatly appreciated guys!

Same issue
mikeogden198181 said:
bump! any help would be greatly appreciated guys!
Click to expand...
Click to collapse
I have the same issue... any resolution?... Need some help here... is our bootloader locked?

ryanmillet said:
I have the same issue... any resolution?... Need some help here... is our bootloader locked?
Click to expand...
Click to collapse
It might be all possible that you just have a simple hardware issue.
Instead of trying the latest, can you humor the conversation by trying the first update on the SamMobile site...!!!
Anything but the last or latest, try to roll back as far as you can...!!!

modem.bin is the radio file. does your phone boot into android and work fine after failing at modem.bin or it does not boot.
You can also try different version of Odin say 3.04 or a different usb port or both.
edit
could also be that the firmware file is not fully downloaded.can you check the md5 on the file to be same as that from sammobile.

munchy_cool said:
modem.bin is the radio file. does your phone boot into android and work fine after failing at modem.bin or it does not boot.
You can also try different version of Odin say 3.04 or a different usb port or both.
edit
could also be that the firmware file is not fully downloaded.can you check the md5 on the file to be same as that from sammobile.
Click to expand...
Click to collapse
Nice reply, munchy_cool...!!!
Sent from my SGH-M919 using XDA Premium 4 mobile app

Getting somewhere...
grassy-sneakers said:
It might be all possible that you just have a simple hardware issue.
Instead of trying the latest, can you humor the conversation by trying the first update on the SamMobile site...!!!
Anything but the last or latest, try to roll back as far as you can...!!!
Click to expand...
Click to collapse
OK... so Odin flashing just doesn't work...
the latest based firmware MG1 stops almost instantly with an Sb2 error....
the oldest based firmware MDJ stops at modem install "secure check fail mdm"
I am however able to flash any custom recovery and from there install anything I want via CWM
Now... I was interested in flashing an alternative modem on my M919V (as my research leads me to understand that LTE is disabled on my device) I really wanted to just flash the M919 Modem...
so I searched and searched for a way to flash the modem to another one... all of reading said not to do it... it's too risky, ect.... BUT... some said it can be done and claimed success.... so I gave it a try...
Odin flash of ANY modem gives an error... same "secure check fail mdm" No CWM modem flash exists... I did find some other devices that had CWM modems to flash but flashing them gave a Baseband "unknown" IMEI "unknown"... so that was super scary... until I repacked the CWM modem zip with my device modem and I was back in business....
Long story short... you can't flash anything Via Odin in this phone really except a recovery... everything else pretty much fails which leads me to think either it was something to do with the partition scheme or the bootloader... I'm unsure as I really am not a developer just a daring competent xda rom addict...
IF you are on M919V and wish to flash modems (granted you will want to only flash a modem specific to M919V) examples would be the MG1 or MDJ... I have found a method that works everytime... you will need to have root via CF-ROOT or a custom rom which has root (that you flashed via CMW after to odin flashed a recovery)
here is the link to the instructions...
http://www.alliance-rom.com/communi...-non-hlos-bin-temporary-flashing-method.8676/
I hope this will shed some more light on our device... I really just wish I could convert my device fully to a M919 as this device (M919V) seems to have some weird issues... OR... better yet... a 9505G :highfive:
---------- Post added at 10:07 PM ---------- Previous post was at 10:02 PM ----------
munchy_cool said:
modem.bin is the radio file. does your phone boot into android and work fine after failing at modem.bin or it does not boot.
You can also try different version of Odin say 3.04 or a different usb port or both.
edit
could also be that the firmware file is not fully downloaded.can you check the md5 on the file to be same as that from sammobile.
Click to expand...
Click to collapse
Tried with 3.04 (instead of 3.09) here is my log - on the device it says "secure check fail: mdm"
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

munchy_cool said:
could also be that the firmware file is not fully downloaded.can you check the md5 on the file to be same as that from sammobile.
Click to expand...
Click to collapse
I still want to see if it is not a software issue by trying or playing around with OFFICIAL firmware, before I assume it is just faulty hardware refusing to corporate with your attempts to restore your Canadian Phone.
Again, munchy_cool, Thank you...!!!
Also have you called Samsung, and explained to them and I quote "That your phone failed during an OS update, and you tried to roll back using a download file from SamMobile, and even then you have experienced no success...!!!", just to see if they have on record of the same issues...???
--Just a though..., as I would hate to keep beating around the bush.
---------- Post added at 09:10 PM ---------- Previous post was at 09:04 PM ----------
Also I notice you have multiple choices to download, what one do you say is your version.
-SamMobile-
SGH-M919V - Canadian Firmware

ryanmillet said:
Tried with 3.04 (instead of 3.09) here is my log - on the device it says "secure check fail: mdm"
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
means the modem is invalid for this phone, as mentioned a few posts above there are multiple firmwares for your s4 , you need to know which carrier your s4 is ..there might be checks in the firmware to stop it from being flashed onto another carriers phone even if model number is same.

munchy_cool said:
there might be checks in the firmware to stop it from being flashed onto another carriers phone even if model number is same.
Click to expand...
Click to collapse
Thus the concern of a hardware conflict/issue with being successful in your flash using Odin.
Android devices are not all the same, they change depending on what country you are in especially if you are using a STOCK ROM. Every country has a different setup requirement when it comes to establishing a valid connection, so thus the hardware/software conflict.
Sent from my SGH-M919 using XDA Premium 4 mobile app
---------- Post added at 12:21 PM ---------- Previous post was at 12:12 PM ----------
grassy-sneakers said:
Thus the concern of a hardware conflict/issue with being successful in your flash using Odin.
Android devices are not all the same, they change depending on what country you are in especially if you are using a STOCK ROM. Every country has a different setup requirement when it comes to establishing a valid connection, so thus the hardware/software conflict.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Besides that I cannot tell which is yours (meaning Firmware - SamMobile) your post suggest EastLink...??? Is this East Canada...? In East Canada what Carriers to they provide you...?, and what Model# is your phone...?
Maybe we can help to narrow down your Firmware you need...???

If you can also provide your OS - BASEBAND version, under Settings - More - About - Baseband Version.
You should be able to get this from a Custom Rom as well...!
Sent from my SGH-M919 using XDA Premium 4 mobile app

grassy-sneakers said:
If you can also provide your OS - BASEBAND version, under Settings - More - About - Baseband Version.
You should be able to get this from a Custom Rom as well...!
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
My baseband has been flashed as I described in my earlier post... M919VVLUAMDJ.... My Carrier is unknown as I bought this phone unlocked for cheap on kijiji... but the guy said he worked for samsung and it was a spare... (Eastlink was the intended carrier...) although this model has 4 carriers it could potentially be... Eastlink, Wind mobile, ect.... The Op has the EXACT same model number and the EXACT same issue as me... he also has tried flashing literally EVERY firmware available on Sammobile website...

ryanmillet said:
My baseband has been flashed as I described in my earlier post... M919VVLUAMDJ.... My Carrier is unknown
Click to expand...
Click to collapse
(Eastlink was the intended carrier...) although this model has 4 carriers it could potentially be... Eastlink, Wind mobile, ect....
Click to expand...
Click to collapse
The Op has the EXACT same model number and the EXACT same issue as me... he also has tried flashing literally EVERY firmware available on Sammobile website...
Click to expand...
Click to collapse
I have confirmed that M919VVLUAMDJ, is the correct firmware for Canadian model phones, still at a miss, is this is a hardware description, given it is specifically found, i.e. provided visually in the OS.
and you say you have tried EVERY firmware...???
Have you read this yet...???
RUN OTHER CARRIER ROMs on AT&T/TMO/Canadian S4 devices

grassy-sneakers said:
I have confirmed that M919VVLUAMDJ, is the correct firmware for Canadian model phones, still at a miss, is this is a hardware description, given it is specifically found, i.e. provided visually in the OS.
and you say you have tried EVERY firmware...???
Have you read this yet...???
RUN OTHER CARRIER ROMs on AT&T/TMO/Canadian S4 devices
Click to expand...
Click to collapse
I'm downloading all the other firmware for my phone to see what one matches.... I'll let you know the results

Help with S3 Bell Bricked ?

Hi my friends Bell S3 crashed yesterday and I when it is going into recovery this is what it is displaying (see attached image) I think I need a the pit file to reflash, I tried just the md5 file but it errors out

Did you try the factory reset option ?
Nervous_Jester said:
Hi my friends Bell S3 crashed yesterday and I when it is going into recovery this is what it is displaying (see attached image) I think I need a the pit file to reflash, I tried just the md5 file but it errors out
Click to expand...
Click to collapse

the.teejster said:
Did you try the factory reset option ?
Click to expand...
Click to collapse
I wanted to try and keep the data, but at this point I will give it a try

Nervous_Jester said:
I wanted to try and keep the data, but at this point I will give it a try
Click to expand...
Click to collapse
Still having same issues does anyone have the pit file for the Canadian S3 ?

Did you try re-flashing a stock Bell ROM? If it was running stock 4.3, do not try to flash anything older than 4.3.

I'm in the same boat and require a PIT file for my Bell 16Gb S3.
When I try to flash the stock image in ODIN I get the following :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747MVLUEMK5_I747MOYCEMK5_I747MVLUEMK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

Did you try flashing a stock ROM from sammobile? You have the latest drivers installed and Odin 3.07?
I use Odin 3.07 on my i747m to flash back to stock Bell ROM all the time and haven't run into your problem.
Are you selecting only F.Reset Time?

audit13 said:
Did you try flashing a stock ROM from sammobile? You have the latest drivers installed and Odin 3.07?
I use Odin 3.07 on my i747m to flash back to stock Bell ROM all the time.
Click to expand...
Click to collapse
Yes. That's exactly what I tried to do and have done it successfully in the past without any issue.
Here is my specific post for help with details:
http://forum.xda-developers.com/showthread.php?t=2725985

the.teejster said:
Yes. That's exactly what I tried to do and have done it successfully in the past without any issue.
Here is my specific post for help with details:
http://forum.xda-developers.com/showthread.php?t=2725985
Click to expand...
Click to collapse
Are you selecting any options other than F.Reset Time?

I would download your md5 file again from sammobile sounds and looks like a bad file to me also make sure u have a good USB cable many times that can be a problem
Sent from my thl T11 using Tapatalk

jimchee said:
I would download your md5 file again from sammobile sounds and looks like a bad file to me also make sure u have a good USB cable many times that can be a problem
Sent from my thl T11 using Tapatalk
Click to expand...
Click to collapse
I appreciate the replies but the file is good as i used it before, so is the cable as I use it all the time.
Something bad has happened with my phone as it's now it's actually hard bricked (won't power on or go into download mode. indicator light is red when plugged in w/o battery) and it might be the result of internal memory failure.
I'm trying the debrick process now as a lost option for me. If that doesn't work I may tried to get it jtagged.

When mine did that I was able to recover with sdcard method but it took me many many tries to get it to write correctly. If that doesn't work then JTAG is next option
Sent from my thl T11 using Tapatalk

jimchee said:
When mine did that I was able to recover with sdcard method but it took me many many tries to get it to write correctly. If that doesn't work then JTAG is next option
Sent from my thl T11 using Tapatalk
Click to expand...
Click to collapse
I just finished my 3rd try to get the debrick img to write. Very frustrating as it take an hour to write and say successful in the end.
But the contents on the card so change or get overridden. I'm going to try on a different computer tonight. I'm determined to get the card written with the img and if that doesn't work then it's jtag.

You just have to keep trying, it took me hundreds of tries to get it to finally write it correctly, when I finally got it correct I couldn't read it on my computer, before that it was showing as a series of folders.
Sent from my thl T11 using Tapatalk

jimchee said:
You just have to keep trying, it took me hundreds of tries to get it to finally write it correctly, when I finally got it correct I couldn't read it on my computer, before that it was showing as a series of folders.
Sent from my thl T11 using Tapatalk
Click to expand...
Click to collapse
I got the Debrick image written and my phone boots from it into download mode. Unfortunately I still cannot write the stock image. It fails to write because of the missing PIT file. So I am at a loss.

[Q] Stock international lte version rom

Hi guys, i just purchased the at&t samsung galaxy tab s and got it unlocked. I'm loving it so far, however one thing annoy me is att get rid of the stock phone call and messaging feature. So i wonder if the international lte rom has that option, so i can make phone call and text?

BADBOY1412 said:
Hi guys, i just purchased the at&t samsung galaxy tab s and got it unlocked. I'm loving it so far, however one thing annoy me is att get rid of the stock phone call and messaging feature. So i wonder if the international lte rom has that option, so i can make phone call and text?
Click to expand...
Click to collapse
if you have the 10.5 LTE, I have uploaded latest stock T805 firmware here:
http://forum.xda-developers.com/showthread.php?t=2902557
just flash using ODIN.
Tapatalked from my GALAXY S5

[email protected] said:
if you have the 10.5 LTE, I have uploaded latest stock T805 firmware here:
http://forum.xda-developers.com/showthread.php?t=2902557
just flash using ODIN.
Tapatalked from my GALAXY S5
Click to expand...
Click to collapse
Thanks, will it be compatible with my tablet? I dont want to brick it, also do i need root before flashing the rom?

BADBOY1412 said:
Thanks, will it be compatible with my tablet? I dont want to brick it, also do i need root before flashing the rom?
Click to expand...
Click to collapse
what tablet do you have? no you don't need root.
here is a guide that you can use
http://androidxda.com/flash-samsung-stock-rom-using-odin
ODIN: https://www.google.se/url?sa=t&rct=...=RK0ekg44IHkrmWq59-3jkg&bvm=bv.77648437,d.bGQ

[email protected] said:
what tablet do you have? no you don't need root.
here is a guide that you can use
I have the AT&t version of the galaxy tab s 4gLTE, modelSM- T807A.So i can just flash the T805 rom on top of my existing rom?
Click to expand...
Click to collapse

BADBOY1412 said:
[email protected] said:
what tablet do you have? no you don't need root.
here is a guide that you can use
I have the AT&t version of the galaxy tab s 4gLTE, modelSM- T807A.So i can just flash the T805 rom on top of my existing rom?
Click to expand...
Click to collapse
well it should work, same Exynos 5420 SoC, so just flash it
turn off your tablet, put it on download mode by holding down the home button + volume down and power until you see download mode.
Click to expand...
Click to collapse

[email protected] said:
BADBOY1412 said:
well it should work, same Exynos 5420 SoC, so just flash it
turn off your tablet, put it on download mode by holding down the home button + volume down and power until you see download mode.
Click to expand...
Click to collapse
i tried to flash it with oDin but it failed,i think it has something to do with the MD5,it fail. The status is Leave CS after check MD5,and then fail when i clicked start
Click to expand...
Click to collapse

BADBOY1412 said:
[email protected] said:
i tried to flash it with oDin but it failed,i think it has something to do with the MD5,it fail. The status is Leave CS after check MD5,and then fail when i clicked start
Click to expand...
Click to collapse
hmm, strange, I used it yesterday and flashed my T805, do you choose PDA in ODIN? also do you get the message that your tablet is added in ODIN?
also your quotes looks ****ed up
you can also try to re-download the file again.
Click to expand...
Click to collapse

so you flash your t805 tablet with the t805 rom? i think it failed bc of the different variant. My tab s is t807a so maybe the MD5 doesnt match. Thanks alot for your effort though

BADBOY1412 said:
so you flash your t805 tablet with the t805 rom? i think it failed bc of the different variant. My tab s is t807a so maybe the MD5 doesnt match. Thanks alot for your effort though
Click to expand...
Click to collapse
yes, but try to download the ROM again and see if it works.

[email protected] said:
yes, but try to download the ROM again and see if it works.
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T805XXU1ANH1_T805XEF1ANH1_T805XXU1ANF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Thats the message i received

hmm, it seems that something is blocking it from flashing, maybe there is something with the T807A that don't allow other stock ROMs to be flashed

[Q] help with instaling OTA after rooting

I got a tab S SMT 800 of course the first thing I did was to root the tablet with Odin3 I was in a hurry even did not apply the system update. Now when I try I get "The operating system on your device has been modified in an unauthorized way bla bla" How can I apply this OTA without re flashing a stock firmware?

Im not sure if you can. But there is a way to set your system status back to officail with root. Doing this method will allow to update with the ota bit i can nit confirm if the ota update will install properly. First download xposed installer, and install it. Then search for a module in xposed called wanam xposed and download and install and reboot. Then open the wanam xposed app and go tab secuirty hacks and tap fake system status till it saids official. Then now just reboot. Now try the ota update. It may install, it may not. Hope this helps

DUHAsianSKILLZ said:
Im not sure if you can. But there is a way to set your system status back to officail with root. Doing this method will allow to update with the ota bit i can nit confirm if the ota update will install properly. First download xposed installer, and install it. Then search for a module in xposed called wanam xposed and download and install and reboot. Then open the wanam xposed app and go tab secuirty hacks and tap fake system status till it saids official. Then now just reboot. Now try the ota update. It may install, it may not. Hope this helps
Click to expand...
Click to collapse
Thank you. I followed your instructions, but it did not work, It did removed the nasty "The operating system on your device has been modified in an unauthorized way bla bla"after it re download the update but came back with Failed to update software.
I ran into this thread on the S5 http://forum.xda-developers.com/showthread.php?t=2728568&page=2 where people succeed by using the stock tar with odin
but do I do not where to find the stockcar for the tab S SMT 800

guliver6 said:
Thank you. I followed your instructions, but it did not work, It did removed the nasty "The operating system on your device has been modified in an unauthorized way bla bla"after it re download the update but came back with Failed to update software.
I ran into this thread on the S5 http://forum.xda-developers.com/showthread.php?t=2728568&page=2 where people succeed by using the stock tar with odin
but do I do not where to find the stockcar for the tab S SMT 800
Click to expand...
Click to collapse
Did you check the Sammobile website first?

Reckoning said:
Did you check the Sammobile website first?
Click to expand...
Click to collapse
Nothing for USA there the closest is Canada

guliver6 said:
Nothing for USA there the closest is Canada
Click to expand...
Click to collapse
I think usa is XAR or celluar south. Idk

DUHAsianSKILLZ said:
I think usa is XAR or celluar south. Idk
Click to expand...
Click to collapse
I got this \T800XXU1ANK1_T800XAR1ANI1_HOME.tar.md5 but I am getting the RED flag fail in odin

guliver6 said:
I got this \T800XXU1ANK1_T800XAR1ANI1_HOME.tar.md5 but I am getting the RED flag fail in odin
Click to expand...
Click to collapse
What does odin say when falshing it. Like the text box in odin when it flash it.

DUHAsianSKILLZ said:
I think usa is XAR or celluar south. Idk
Click to expand...
Click to collapse
DUHAsianSKILLZ said:
What does odin say when falshing it. Like the text box in odin when it flash it.
Click to expand...
Click to collapse
Here the Odin reply:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T800XXU1ANK1_T800XAR1ANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

guliver6 said:
Here the Odin reply:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T800XXU1ANK1_T800XAR1ANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
I honestly have no idea whu it does that. People been havent problems with odin. Can your tab still boot? It seems like it didnt even flash. Maybe a bad drivers.

DUHAsianSKILLZ said:
I honestly have no idea whu it does that. People been haven't problems with odin. Can your tab still boot? It seems like it didn't even flash. Maybe a bad drivers.
Click to expand...
Click to collapse
Good news this time everything went smooth did not have to reset factory and the tablet says
"Software update: the latest updates have already been installed", just lost the root but I flashed the auto root again and its is perfect.
Thank you everybody for your help.

guliver6 said:
Good news this time everything went smooth did not have to reset factory and the tablet says
"Software update: the latest updates have already been installed", just lost the root but I flashed the auto root again and its is perfect.
Thank you everybody for your help.
Click to expand...
Click to collapse
So what did you do? Did you flash it again? Or exactly what did you do to fix it? I just wanna know since whenever andriod l is out.. I can flash it correctly.

DUHAsianSKILLZ said:
So what did you do? Did you flash it again? Or exactly what did you do to fix it? I just wanna know since whenever andriod l is out.. I can flash it correctly.
Click to expand...
Click to collapse
Honestly not sure,I turned off the tablet hold the 3 buttons to put int in download mode and the the odin worked its magic just waiting for android 5.0 now

guliver6 said:
Honestly not sure,I turned off the tablet hold the 3 buttons to put int in download mode and the the odin worked its magic just waiting for android 5.0 now
Click to expand...
Click to collapse
Probably out of the topic but since I started this thread I need to give an explanation
If you wander why Guliver6 is currently disabled it is because on XDA
I created a double account by error so on my demand the previous account show disabled, so from now on I will use only guliver365 for subsequent follow up.

guliver6 said:
Honestly not sure,I turned off the tablet hold the 3 buttons to put int in download mode and the the odin worked its magic just waiting for android 5.0 now
Click to expand...
Click to collapse
Probaly needed to reconnect the cable again. Happens all the time with my ipod and ipad.

app
There is a app that will hide your root. it works very well.
Its named hidemyroot and works without reboot. :good:

My Samsung S3 I747 is stuck on the logo when booting onto phone, tried using Odin..

I got my S3 from my brother since my Nexus 5 is currently broken, and with the S3 he installed CyanogenMod though it doesn't have root. So I decided to try and root it, but probably messed something up and now I'm stuck on the Cyanogen loadup screen, been waiting there for a solid 3 hours, and finally decided to try to fix it. I've tried using Odin3 3.0.7, trying to flash stock rom but I'm currently getting this error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know what to do at this point? I've tried multiple different stock roms in case one of the stock roms had a problem. However, I flashed TWRP no problem, and I have that working for my recovery. What should I do at this point to get my phone back to Stock ROM?

Do you know what bootloader it is running? After 4.3 you cannot downgrade. Use the terminal emulator in TWRP and enter this if you're not sure:
getprop ro.bootloader
If it returns a 4.3 build number you can only flash the same or newer builds. Look for enewman17's threads in the General section for how to return to stock on those builds.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Do you know what bootloader it is running? After 4.3 you cannot downgrade. Use the terminal emulator in TWRP and enter this if you're not sure:
getprop ro.bootloader
If it returns a 4.3 build number you can only flash the same or newer builds. Look for enewman17's threads in the General section for how to return to stock on those builds.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I can't access the terminal emulator since I get stuck on the Samsung logo when trying to boot my phone.

The error happens when trying to flash aboot.mbn because, as @DocHoliday77 noted, LK3 cannot be flashed if the phone is running a 4.3 or newer bootloader.
I advise flashing TWRP and a custom ROM. This will allow you to boot the phone and determine the phone's bootloader version.

Flinze said:
I can't access the terminal emulator since I get stuck on the Samsung logo when trying to boot my phone.
Click to expand...
Click to collapse
I thought you said you had TWRP installed and working? Are you able to boot recovery at all?
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
I thought you said you had TWRP installed and working? Are you able to boot recovery at all?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Yes, I am able to access recovery with TWRP working, I just don't know where the terminal emulator is. (sorry i'm not very experienced w/ TWRP)

Also one thing to note, I can't install any sort of ROMS or can't flash anything through TWRM for some reason. When I swipe to flash a rom, what happens is that it just automatically goes back to the TeamWin logo page thing, and then I'm back on the home screen of TWRM (which shows all the buttons like install, wipe, backup, restore, mount, etc.) So I can't flash through TWRM, and if possible can someone link me a custom rom that supports md5, .tar, with those file extensions since the roms I've tried all are zips of .img files. (unless there is a way to convert it to md5, .tar, etc. extentions so that I can use ODIN on my computer to flash it)
edit: what I mean by md5, .tar is a PDA file so that I can use ODIN. if possible I just want my phone to run again w/ any roms... I've been phoneless for a few days now

You can find the terminal through twrp's advanced menu. Select the root folder and go from there.
Look in enewman17's NJ2 thread. He has a recovery flashable stock recovery. Try flashing that, then factory resetting from the stock recovery.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
You can find the terminal through twrp's advanced menu. Select the root folder and go from there.
Look in enewman17's NJ2 thread. He has a recovery flashable stock recovery. Try flashing that, then factory resetting from the stock recovery.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Okay, when I typed the command getprop ro.bootloader what is get is:
I747MVLDLK4
I've tried flashing the stock recovery through TWRP, but it just again doesn't work as I explained in the previous post. So I tried using ODIN to flash it after converting it into a md5 file so that ODIN can read it and now when I try to enter recovery my screen is just black.

Looks like an i747m bootloader, not i747.
http://www.sammobile.com/firmwares/download/15321/I747MVLDLK4_I747MOYADLK4_MTA/

audit13 said:
Looks like an i747m bootloader, not i747.
http://www.sammobile.com/firmwares/download/15321/I747MVLDLK4_I747MOYADLK4_MTA/
Click to expand...
Click to collapse
Oh my gosh! Thank you!!! I just followed the instructions after the download and this recovery worked! It looks like I thought my phone was i747, but it was actually i717M, thanks!!!

Glad you got your phone back.
I can't take the credit because @DocHoliday77 helped you determine the phone's bootloader.

Flinze said:
Oh my gosh! Thank you!!! I just followed the instructions after the download and this recovery worked! It looks like I thought my phone was i747, but it was actually i717M, thanks!!!
Click to expand...
Click to collapse
Glad to hear you got it going!
audit13 said:
Glad you got your phone back.
I can't take the credit because @DocHoliday77 helped you determine the phone's bootloader.
Click to expand...
Click to collapse
Don't even worry about cred on this stuff man! You do plenty enough to be just as deserving! @dawgdoc too!
And tbh, I'm really glad you chimed in on that one! Since I'm not as familiar with which variant has which build number for the I747/I747M, (and since I'm usually used to just glancing at the last 3 characters), it probably would've taken me another 2 or 3 posts to have realized that was the problem. I Definately didn't catch it that first time!
So in the spirit of giving credit where it's due, you do deserve it here and in many, many other threads! Thanks!
Sent from my SGH-T999 using Tapatalk