Related
Hey everyone. I know there are already a few threads with boot loop animations, and am having difficulties finding the same situation as what I'm going through. Here is what the phone used to have before it randomly started looping:
Rooted - with Stock rom, using ClockwordMod Recovery 5.5.0.2
Used Go Launcher Theme ( if that even matters )
No additional roms installed or anything, the phone is 3 months old.
Ok here is where I'm stuck. I understand I should reflash somethings like recovery image or something, but I'm stuck with one big problem. My computer and phone don't recognize using the USB mount.
The message I get is called "Unable to open lunfile ( no such file or directory)
Here's what screens I can get to:
1. Hold vol up/down while holding power ( the little android with its belly open, and the options Start - Restart Bootloader - Recovery mode - Power Off )
2. Hold vol down - ODIN mode, with the START option only
I can access WMD recovery and factory reset, Try to install my old backup, nothing works at all in that area, no matter what I do.
Can someone advise me a step by step way of getting my computer to recognize my phone, so that I am able to do fastboot, or reflash, or anything to get my phone working again. I can't access my internal memory at all.
It's even possible that I've read too much, and my frustration is getting in the way, if so I apologize! Some guidance would be greatly appreciated!
Thanks in advance of course! I need my phone for business!
Cheers,
Install the drivers on a computer then use fastboot oem unlock. Or just factory reset it from within recovery.
Sent from my Galaxy Nexus using Tapatalk 2 Beta-4
Try my siggy.
I'm not sure about the exact error:
But the link there will get you the correct drivers.
Also, as stated...try to factory reset.
You'll lose your apps/data that way though =/
Hopefully you can get the driver installed and get your computer to recognize.
If so, follow this to back up your apps:
http://forum.xda-developers.com/showthread.php?t=1420351
Have exactly the same setup as you (rooted/stock/CWM) and had the animation bootloop - animation would just loop until a battery pull.
Only thing that solved it was a factory reset from recovery. Been working fine for the 4 weeks since. No need for any reflashing etc. Titanium recoveries have all worked fine as well. Didn't try my Nandroid backup as I thought that may still have the 'fault' built in.
I had a boot loop for every from I tried to flash...wat fixed it was before flashing u need to wipe system data and wipe the cache in the recovery...ie a clean install...then every rom I tried worked...so I think ur missing that crucial step coz it worked for me
Sent from my Galaxy Nexus using Tapatalk
Hey guys, as stated above I've done numerous factory resets, it still seems to boot. I will for sure try to get the drivers installed so my phone is recongised by the computer, but would need step-by-step assistance when doing fastboot, or whatever the next step is.
Looking for more help though! Keep em coming!
?
Any other ideas?
Thanks!
Ok guys, so here's where I'm at now. I've used Jubakuba's sticky link, located here:
http://forum.xda-developers.com/showthread.php?t=1529058
Everything is able to be recognized up to the point where it says "Put the su.zip on your phone."
Since I cannot access my phone contents, since I keep getting this "Unable to open lunfile ( no such file or directory), it does not allow me to add anything to my phone.
I re-installed CWD as stated in the list of things to do, and all that went well. But I have the same issue, I tried factory resetting all that. erase cache, and still stuck with the same issue.
What's my next step now peeps? Looking for a quick answer as I have time to do it tonight!
Edit***
Just tried this trick: but it says it does not recognize the device?? what is going on! Please help someone! Thanks!
Panic Section! (Something is Wrong)
Q: My phone won't boot!
A: The easiest option is to get into recovery and restore a nandroid using the above guide (pull battery to put phone in an off-state if needed).
However, more advanced options are available if you don't have a nandroid available (You're naughty).
Do you have another rom .zip available on your SD card? If so, simply use the above guide for installing a rom to get you booting again.
If not, you can download one on your PC. Boot into fastboot (the green Android with open chest menu).
Move the .zip to the C:\android-sdk-windows\platform-tools folder.
Open ADB.
Change the NAMEOFZIP.zip below to the correct file name...and perform the action.
Surely your computer recognizes your phone. Otherwise how were you able to unlock the bootloader and flash the recovery?
And I've never seen that error message before. It doesn't even make any sense to me. Where are you seeing it? On your phone or on your computer? And in what context? What are you trying to do when it shows up?
If your phone isn't booting I'm not sure that you can copy any files to it yet. (Maybe you can use adb in clockworkmod? I'm not sure) What I do know you can do is flash the stock ROM and start over.
Download the image from Google here:
http://code.google.com/android/nexus/images.html
Here's a instructions for the GSM version:
http://forum.xda-developers.com/showthread.php?t=1366806
For the Verizon version, I can't find the thread at the moment but you just replace the filenames and also there's 2 radios to flash so:
fastboot flash radio *filename*
fastboot reboot-bootloader
fastboot flash radio-cmda *filename*
"Unable to open lunfile ( no such file or directory) appears on the phone, in CWD mode, when trying to attempt "mount Usb" to be able to access my internal storage .
I am attempting your thoughts right now.
I will post with results
Ok I tried to do this step. This is the outcome I received on the computer after even typing the first step:
'fastboot-windows' is not recognized as aninternal or external command, operable program or batch file.
A thing to stress, I'm not sure how to do step 1: 1) Take a Nandroid Backup if you have CWM installed.
EDIT***
GREAT NEWS!
used this setup!
http://android.modaco.com/topic/348161-01-feb-r4-superboot-rooting-the-gsm-lte-galaxy-nexus/
and it worked!
Thank you everyone! Going to play with my phone and make sure it all works!
Macinshak said:
Ok here is where I'm stuck. I understand I should reflash somethings like recovery image or something, but I'm stuck with one big problem. My computer and phone don't recognize using the USB mount.
The message I get is called "Unable to open lunfile ( no such file or directory)
Click to expand...
Click to collapse
the problem is when that happen?? when ur phone is booted and u plug the usb cable to ur pc? or when u are under recovery and want mount the usb mass storage? the second one doesn't work
Hello.
I am writing here as i am hoping that one of You experienced android users will be able to help me to fix my phone (i8150).
I am rather new to android and so far i have been following instructions very carefully and it wasn't the very first time i was flashing rom.
I did rooted my phone, flashed CWM Recovery via adb, used titanium backup, root explorer etc. Also its been long time since i started using Kezra V4 rom with ICS theme, unmodified vold.fstb. I never ever had any issues with the phone or rom.
To make things as clear as possible i will start with the brief info on what i did to my phone last week.
Last weekend (a week ago) i did a fresh install of Kezra v4 rom with ics theme, original vold.fstab, root explorer and launcher pro (placed in system/app).
Flashing process went fine, no errors in CWM (and yes i did wipe dalvik, cache, formatted system). Several apps were restored with titanium. Phone and rom were working as intended, no signs of slowdowns, errors etc.
Couple days latter i decided to add 1 ringtone and 1 notification sound. Both are ogg files and were placed to system/media/audio/ringtones and notifications. I did remember to mount as r/w change permissions and remount it as r/o. I rebooted phone once but i didn't see new ringtone or notification sound on the list so i rebooted it again. After second reboot the phone booted without any problems but once the system was loaded touch screen stopped to respond and the phone froze. I rebooted it again and this time everything went back to normal.
Yesterday i tried to copy new Kezra rom to my INTERNAL sdcar in order to flash it with CWM. But instead of that i stumbled upon a problem that is beyond my knowledge and comprehension. I DID NOT FLASH ANYTHING AT THIS POINT AS I LOST ACCESS TO CWM
- CWM Recovery disappeared - when i am trying to boot to CWM my phone turns off. There is very very very quick flash of the screen showing recovery but that is it.
- when copying 270mb rom to INTERNAL sdcard it stops at 10% with message that the file can not be read
- when copying smaller files, files are being copied from pc to phone but once the phone (usb storage) is disconnected from pc the files that were copied to internal sdcard are not there as if they were never copied
- i can copy files from external sdcard to internal sdcard with rootexplorer but after rebooting phone the files are gone from internal sdcard
- i can install any app from market or from sdcard but after rebooting, the installed app is gone, it doesnt exist in data/app, the cache files on internal sdcard are gone as well and the installed app is not on the list
- i can take pictures and if they are saved to internal sdcard they vanish after rebooting phone
- if i change any settings of the phone (volume, brightness, wifi settings, any settings) after rebooting phone the settings that i changed are reverted to the state from before rebooting
- i did try to delete those 2 files - ringtone and notification sound from the system/media/audio/ringtones and notification but after rebooting the phone they are still there not deleted (i do remember abot mounting r/w r/o and permissions)
- after formatting internal usb storage (settings/storage/format usb) and rebooting phone all the files are there - as if it was not formatted at all
- after formatting internal usb storage from pc and rebooting phone all the files are there - as if it was not formatted at all
- after "factory reset data" and rebooting phone nothing has changed as if it has not been reseted
- i tried to update superuser binary (my binary is 3.0.3) via wifi - there is new ver 3.0.3.2(ok), update(ok), downloading(ok),
gaining root(ok),remounting /system as rw (ok), md5sum(ok), changing file mode to 06755(ok), moving su (ok), checking md5sum(ok),
remounting /system as ro(ok), installed ver 3.0.3, update failed - superuser message -> "this updater cannot update the su binary on phones that have some kind of write protection on the system partition like S-ON"
Now i guess you are wondering if the phone works. Yes it does.
- it is eu phone bought in England and used in England
- the phone is not assigned to a network carrier, it is not locked in any way - network lock (off), network subset lock (off), SP lock (off), CP lock (off)
- I can make/receive calls and messages
- wifi, g3, tethering, bluetooth, gps, camera etc. are working fine
- all the applications including new apps are working fine as long as i don't reboot phone.
- I don't experience any slowdowns, crashes or freezes
- I have access to system files via root explorer, the phone is rooted
- i don't get any messages that file system is write protected
- rumdump works
- download mode works
Here is what i tried so far:
- flash CWM Recovery via adb but after rebooting i still have no access to recovery (no errors in adb - process completed)
- flash original stock recovery via adb but after rebooting i still have no access to recovery (no errors in adb - process completed)
- flash CWM Recovery via ODIN but after reboot i can not boot to CWM
- flash stock rom I8150XXKK1 via ODIN - no changes to rom. Phone is loadin the old rom
ODIN Explanation:
In both cases of flashin CWM and stock rom i followed the procedure step by step with and without automatic reboot. ODIN says that flashing is done and PASS. During automatic reboot phone doesnt reboot it only turns off. After manual reboot phone is loading old rom (Kezra V4 installed a week ago) and there is no sign of CWM.
So now i am wondering:
- is it software or hardware issue
- how can i identify and isolate the problem
- how to make the phone to save the changes after reboot
- how to get a working CWM Recovery so i can flash the phone
- How to make ODIN to flash the phone
What do You make out this?
Man.....I am so sorry.
I have never seen such a well documented OP...
Congrats on that first!!
I really am at a loss as to what to suggest, as you have covered so many bases yourself.
Just to me, looking again at your post, I don't really think those .ogg files have anything to do with it.
It seems your problems originated with flashing the Kezra Custom ROM.
To lose your Recovery Partition must mean some data corruption introduced by the flashing process.
I know you have flashed stock with ODIN, this was One Package??
I am not sure, but I think there may be Stock ROM which has seperate files.......???
It is just a suggestion, perhaps someone else may know.....
At least this will bump your post!!!
All I can say further is best of luck....hope it can be solved.
Also, there also is return for repair to Sammy.....as we say in Ireland.... Play the eejit!!
Sent from my SGW GT-I8150 using Tapatalk!!
Thanks Irish for taking your time to reply.
Well... yes i did my best to make the post as much descriptive as possible due to the nature of the issue itself.
When it comes to ODIN it was one file only. I didn't try with multiple files.
I don't think that ogg files itself are the source of all that mess. On the other hand i wouldn't blame Kezra rom.
As you noticed i tried to track down the time and place when it happend and how it all started.
It may be a coincidence but i suspect that "ogg glitch" (keep in mind that was the very first fail reboot and system crash of my phony since i bought it) has something to do with it. Why? All the settings, apps etc. in the phone are as they were set on Wednesday 28.03 including Alarm set to 8:00am. Same day "ogg glitch" occurred. Betwene Wednesday and Now no flashing has been done except all the mentioned steps (failed) that i have taken in order to restore my phone. Every time i reboot the phone, all the setting, apps etc. are being reverted to the state from before "ogg glitch"
Another thing is the message given by superuser while trying to update su binary. "Some kind of write protection like S-ON". (at this point i didn't have time to do a in depth search on "S-ON")
Now... i am not an expert but it makes me wonder... is it?
- internal phone memory (the chip itself) is corrupted or damaged
- the file system of internal memory is corupted
- system partition is corupted
- there is an issue with root access and permissions
- while copying ogg files to /system/... i made a mistake at some point and set wrong mount rw/ro and wrong permissions
- is such thing as "recovery loop" possible - after every each reboot the phone is "restored" to the state from before "ogg glitch"
When it comes to return to Samsung... The phone is not only working but is rooted, has a custom rom... She is not a VIRGIN mate.
Sorry, I didn't mean to say that Kezra's ROM is at fault......phew...nearly got into trouble there.
I meant that during the flash of the ROM, there may have been an event, loss of power??? which has caused corruption of the Partition system on your phone??
I know there is no locked Bootloader on our phone, which is what s-on indicates....usually HTC phones have/had this....hence problems with flashing Custom ROM's Recovery......
Somehow, your phone has got into a state which mimics locked bootloader, has to be corruption, IMO.
If you can locate ODIN files to flash separately, maybe will work, but I'm not sure..
As for returning to Samsung......
there is a thread here somewhere, Rio Saputro, where Sammy has accepted phones with boot-loops back for repair, due to hardware issues, so I am not sure haw much checking they do!!!
I can still access download mode but i think i wont be able to flash anything.
ODIN MODE
PRODUCT NAME: GTI8150
CUSTOM BINARY DOWNLOAD: NO
CURRENT KERNEL: UNKNOWN !!
Irish would You be so kind and compare that info with your downlod mode please?
Otherwise i think i will have to return my W to Samsung.
Cheers
jbs.sc said:
I can still access download mode but i think i wont be able to flash anything.
ODIN MODE
PRODUCT NAME: GTI8150
CUSTOM BINARY DOWNLOAD: NO
CURRENT KERNEL: UNKNOWN !!
Irish would You be so kind and compare that info with your downlod mode please?
Otherwise i think i will have to return my W to Samsung.
Cheers
Click to expand...
Click to collapse
Don't worry, your phone is not bricked.. Just download the Asian firmware from the development thread (it will have multiple files inside the package) and flash it through Odin (look for flashing process for multiple file package), you will be good to go.
Sent from my Novo704FC-E2 using Tapatalk
I have already tried multi part asian firmware provided by THE-E.
Same thing as with one file firmware.
With auto reboot phone just turns off and doesn't turn on.
Without auto reboot... well it just stays on and that's it.
After manual reboot i am back to the old rom.
I am using odin 4.43
Should i try other versions?
I do have factory gurantee on my phone till 2013 and if they won't accept it...
oh well s*** happens... not for the first nor the last time in my life. There is no fun of modding without a risk.
jbs.sc said:
I can still access download mode but i think i wont be able to flash anything.
ODIN MODE
PRODUCT NAME: GTI8150
CUSTOM BINARY DOWNLOAD: NO
CURRENT KERNEL: UNKNOWN !!
Irish would You be so kind and compare that info with your downlod mode please?
Otherwise i think i will have to return my W to Samsung.
Cheers
Click to expand...
Click to collapse
Hi friend.....
Not sure what your current state of play is, but my download mode was exactly as you have quoted above.
see this from last Christmas,
when I was in despair.....symptoms very similar to what you have now, after failed ODIN flash....I had no recovery and my phone would not boot, just download mode, as you have above.
However, I solved it pretty easily, after modifying my ODIN settings.
Unfortunately THE-E's instructions said "unmark Auto Reboot"......which is not correct.....
this meant the Flash never completed.......
See here for my celebratory post, much relieved...
This was very much like your recent experience.
I think there may be some hope/help for you there!!!!
Let me know......bast of luck......
Irish,
I did try with auto reboot marked. When ODIN starts the procedure of auto reboot the phone turns off but it doesn't turn on. ODIN waits for the phone till the flashing is completed and says PASS but the phone stays turned off anyway.
Btw. Perhaps i should use KIES to try to update and brick my phone.
I would have a valid reason to claim warranty
jbs.sc said:
Irish,
I did try with auto reboot marked. When ODIN starts the procedure of auto reboot the phone turns off but it doesn't turn on. ODIN waits for the phone till the flashing is completed and says PASS but the phone stays turned off anyway.
Btw. Perhaps i should use KIES to try to update and brick my phone.
I would have a valid reason to claim warranty
Click to expand...
Click to collapse
OK.....I think that was my last shot......I am out of ideas!!!
Maybe post screen shot of ODIN procedure if you can??
I can't remember how my phone reacted after PASS and Reboot, but that doesn't sound right.......
Can you post the ODIN Message output.....just so ppl can compare and perhaps help.
OK i tried to flash it again just to take screenshots. And again same thing.
OK.....just have a look at my thread here.......
which is a pdf of the Service manual I "procured"
There is something there about ODIN, which Samsung use as well....
I just noticed a little thing when using multiple files.....
they have also set the " Reset Time = 300" for their Flash.......
P.21....or [6 Level 1 Repair]........
the pdf files are a little out of sequence!!!!
Also, try flash without SD or SIM card inserted.....
Irish,
Just to let you know. I did what you suggested.
Flashing with timer, without sim card and without external memory did't help.
As far as i remember someone had similar problem, unfortunately solution was never found.
I think when it comes to ODIN i run out of options.
Thanks for all the help and assistance.
OK......out of suggestions here!!
It is just such a pity.....
download mode normally means "no brick-can flash"
Sorry we could not fix.....next move?? Sammy??
Best of luck anyway!!
Sent from my SGW GT-I8150 using Tapatalk!!
Did you try to flash only boot img? Not sure if that's possible but it looks like your boot is messed up.
Sent from my GT-I8150 using Tapatalk 2 Beta-5
I dont think it makes any difference what am i flashing.
Whether it is software or hardware problem it prevents phone from auto rebooting (and applying any changes made during flashing process)
Not only during ODIN auto reboot but also from download mode reboot (once in download mode you can press volume down button to reboot phone)
Just thinking if you try to do it part by part and not whole firmware in 1 go. But if you manage reflash image boot hope you should by fine
So, basically, I've done a stupid thing, I attempted to install Cyanogen, forgetting to enable USB debugging, and it didn't go too well, all I can do now is use Clockwork Recovery as there is no ROM on the phone, I'm not sure if there's anyway I can enable USB debugging and flash it via USB, with Odin, but whenever I try to flash via .zip through Clockworkmod Recovery I either get the status 7 error, or if I take steps to get rid of that the installation just aborts, any ideas on what I can do?
There is also a possiblity I installed Clockwork Recovery for the 3G edition, whereas I have the LTE edition of the phone, I'm not sure if that'll have contributed to the downfall of my smartphone adventures
Any suggestions would be greatly appreciated!
Tobiscuits said:
So, basically, I've done a stupid thing, I attempted to install Cyanogen, forgetting to enable USB debugging, and it didn't go too well, all I can do now is use Clockwork Recovery as there is no ROM on the phone, I'm not sure if there's anyway I can enable USB debugging and flash it via USB, with Odin, but whenever I try to flash via .zip through Clockworkmod Recovery I either get the status 7 error, or if I take steps to get rid of that the installation just aborts, any ideas on what I can do?
There is also a possiblity I installed Clockwork Recovery for the 3G edition, whereas I have the LTE edition of the phone, I'm not sure if that'll have contributed to the downfall of my smartphone adventures
Any suggestions would be greatly appreciated!
Click to expand...
Click to collapse
hi,
first of all, dont worry for that. its not really a brick.
reboot your device to download mode (press vol-down, home and power buttons)
install philz_touch_5.18.2-i9195.tar.md5 - 7.08 MB via odin and restart to your phone to philz recovery. (press vol-up, home and power button, if you see samsung logo release power button)
then install cm rom and reboot. if you dont have any rom file in your storage, then copy rom zip file to your external sdcard via your pc and put external card again to your phone and reboot recovery and try install your rom from external card. this recovery is for lte variant of s4 mini.
i hope you get your phone working again and tell me if it works
I can't use Odin to detect my phone, it just doesn't show up :c
There is another solution.
first - get philz recovery zip file for lte variant and extract it. (get it here http://d-h.st/qdn) open updater-script and remove this code and save file.(that installer will not stop because your device is show him you have 3g variant but you have lte one so simply remove this code and save file to your zip)
assert(getprop("ro.product.device") == "serranolte"
|| getprop("ro.build.product") == "serranolte");
make zip file and copy it to your sdk folder and install it via adb sideload. (google it when you dont know how to install with sideload)
after this you should have right recovery.
then install your rom with sideload and reboot.
Yeah, that did fix it, I now however have the issue of my Wifi won't turn on and I cannot install things as it states that there isn't enough storage space available, which there is, there is also 4.62 Gb used in my Misc files and nothing is listed as even close to that size, so my phone isn't particularly better off ¬.¬ But thanks for your help
Got all of the problems sorted now, for the storage space thing, I had to remove my external SD card and just go on a formatting blitz after reinstalling Clockworkmod and the wifi required a modded kernel to be installed
Hi can someone help me, I have the same issue as Tobiscuits. The link no longer worked but I managed to get the file needed for recovery Odin doesn't see my phone so I can't recover to stock that way I'm guessing USB debugging is off I'm stuck on the Odin mode screen everytime my phone starts. I'm new to this what do I do with the recovery zip I have, it's on my pc atm
Stevoo19 said:
Hi can someone help me, I have the same issue as Tobiscuits. The link no longer worked but I managed to get the file needed for recovery Odin doesn't see my phone so I can't recover to stock that way I'm guessing USB debugging is off I'm stuck on the Odin mode screen everytime my phone starts. I'm new to this what do I do with the recovery zip I have, it's on my pc atm
Click to expand...
Click to collapse
Have you installed latest Samsung drivers? Or try reinstall/update them, from Samsung website?
(in the past some people had to uninstall the Samsung sync software & it's drivers first if it had already been installed on PC, ie smartswitch/kies)
You must reboot PC between each operation above & check Samsung drivers uninstalled in program list (assuming Windows). Reboot after install as well.
Update to TWRP after fixed.
IronRoo said:
Have you installed latest Samsung drivers? Or try reinstall/update them, from Samsung website?
(in the past some people had to uninstall the Samsung sync software & it's drivers first if it had already been installed on PC, ie smartswitch/kies)
You must reboot PC between each operation above & check Samsung drivers uninstalled in program list (assuming Windows). Reboot after install as well.
Update to TWRP after fixed.
Click to expand...
Click to collapse
Hi thanks for replying, yes I installed Samsung usb drivers still doesn't recognise my device, I do have the same phone again and that works but that phone doesn't recognise on Odin or pc either maybe it's a cable issue or USB driver issue like you said. I'm pretty new to all this but TWRP is the recovery zip right? When I try factory reset it goes through the motions then nothing happens goes back to Odin mode automatically.i should mention I uninstalled magisk before my phone decided to not boot back up I'm guessing I uninstalled it wrong. I'll try uninstalling the Samsung drivers and reinstalling.
Here's what I did and where I'm at please help if you can? **MOVED TO CORRECT FORUM **
Originally I tried to root but it didn't root. In fact my phone started to have issues right after my attempt to root.
PHONE: Tmobile Samsung galaxy S2 SGHT989 loaded w Jelly Bean 4.1.2
WHAT I DID: I followed this guide to root my phone (it didn’t work/root, even though the Recovery message said it rooted)
**I'm sorry for referencing another forum..I just googled a how to**
downloaded extracted: ODIN 1.85
downloaded: TWRP (touch recovery 2.5.0)
downloaded to pc then put on SD card: Superuser – CWM_ROOT_SUPERUSER_3.1.3_BUSYBOX
*THEN I FOLLOWED THE REST OF THE GUIDE ON HOW TO ROOT..very meticulously (the guide shows CWM recovery but I used TWRP recovery).
From TWRP I selected and ran the zipfile for Superuser (the CWM***BUSY BOX file).
I got the message that said that I was rooted.
I rebooted the phone and downloaded the Titanium Backup app because it requires root. I got the message from Titanium Backup app that said I wasn’t rooted.
The guide says that if it’s not rooted then to go back to recovery/TWRP and flash Superuser again. I did and it STILL didn’t work.
I tried reloading the cwm recovery as well (both CLOCKWORD MOD RECOVERY I thought maybe this was the issue “nope” and then back to TWRP because it’s easier to use).
After this it started doing the endless “BOOTLOOP”. I had to take out the battery to stop it.
I tried going into MASTER RESET from boot “volume down, power, home key” it didn’t work..still BOOTLOOP.
So I rebooted into recovery/TWRP to wipe thinking that this might fix it. I wiped out everything including the OS (I got a message when I was about to reboot that said “you don’t have an OS, do you want to proceed reboot?”.
In my attempt to unbrick my phone I tried to go through Kies but it didn't recognize my phone (I checked the model & serial number 4-5 times).
So I downloaded the stock ROM through samsung updates so I could flash the ROM with ODIN. I started made sure auto reboot f.reset time was checked, clicked PDA, browsed to the file, highlighted the file and when I clicked "open" to add the file it doesn't show the path in PDA section as it usually does. So ODIN won't let me flash the stock ROM.
I don't think the file's corrupted because I downloaded the stock ROM from 2 sites multiple times, I tried switching USB ports, switched USB cables, rebooted PC, restarted odin. I can't get it to recognize the file.
I'm at my wits end so if anybody can assist I'd be very grateful.
Thank you for your time and help
raymondhs said:
Here's what I did and where I'm at please help if you can? **MOVED TO CORRECT FORUM **
Originally I tried to root but it didn't root. In fact my phone started to have issues right after my attempt to root.
PHONE: Tmobile Samsung galaxy S2 SGHT989 loaded w Jelly Bean 4.1.2
WHAT I DID: I followed this guide to root my phone (it didn’t work/root, even though the Recovery message said it rooted)
**I'm sorry for referencing another forum..I just googled a how to**
downloaded extracted: ODIN 1.85
downloaded: TWRP (touch recovery 2.5.0)
downloaded to pc then put on SD card: Superuser – CWM_ROOT_SUPERUSER_3.1.3_BUSYBOX
*THEN I FOLLOWED THE REST OF THE GUIDE ON HOW TO ROOT..very meticulously (the guide shows CWM recovery but I used TWRP recovery).
From TWRP I selected and ran the zipfile for Superuser (the CWM***BUSY BOX file).
I got the message that said that I was rooted.
I rebooted the phone and downloaded the Titanium Backup app because it requires root. I got the message from Titanium Backup app that said I wasn’t rooted.
The guide says that if it’s not rooted then to go back to recovery/TWRP and flash Superuser again. I did and it STILL didn’t work.
I tried reloading the cwm recovery as well (both CLOCKWORD MOD RECOVERY I thought maybe this was the issue “nope” and then back to TWRP because it’s easier to use).
After this it started doing the endless “BOOTLOOP”. I had to take out the battery to stop it.
I tried going into MASTER RESET from boot “volume down, power, home key” it didn’t work..still BOOTLOOP.
So I rebooted into recovery/TWRP to wipe thinking that this might fix it. I wiped out everything including the OS (I got a message when I was about to reboot that said “you don’t have an OS, do you want to proceed reboot?”.
In my attempt to unbrick my phone I tried to go through Kies but it didn't recognize my phone (I checked the model & serial number 4-5 times).
So I downloaded the stock ROM through samsung updates so I could flash the ROM with ODIN. I started made sure auto reboot f.reset time was checked, clicked PDA, browsed to the file, highlighted the file and when I clicked "open" to add the file it doesn't show the path in PDA section as it usually does. So ODIN won't let me flash the stock ROM.
I don't think the file's corrupted because I downloaded the stock ROM from 2 sites multiple times, I tried switching USB ports, switched USB cables, rebooted PC, restarted odin. I can't get it to recognize the file.
I'm at my wits end so if anybody can assist I'd be very grateful.
Thank you for your time and help
Click to expand...
Click to collapse
https://www.dropbox.com/s/vxapb57yeuk60ud/T989UVMC6_T989TMBMC6_TMB.zip
try unzipping this file- place .tar file on desktop
when your connected ond open odin, click pda , search desktop and add .tar file -hope this helps
Ok..so that I don't mess this up.
after I download this to desk top should I not open the zip file? Just open up ODIN select PDA then browse to the file location?
I'm screwing something up here...
raymondhs said:
Ok..so that I don't mess this up.
after I download this to desk top should I not open the zip file? Just open up ODIN select PDA then browse to the file location?
I'm screwing something up here...
Click to expand...
Click to collapse
did you get pm
Hallelujah!
UNBRICKED :victory: Up and running...phew!!
Thanks Fasted12! If you were here I would hug ya and make you feel uncomfortable. Stay awesome :good:
Hello everybody,
Here my problem :
I tried to install a custom rom, I failed. Now, my smartphone stay on the Asus logo screen. I tried to follow this - http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835 - to fix the problem, but when I connect phone and laptop, adb doesn't find the device.
If I continue and go in recovery mode (using TWRP), laptop can access the phone (I can see internal memory but not external).
And if I try the ADB sideload, there is no device again...
It's the first step, I don't see any other way to unbrick the phone...
Thanks in advance
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256 be lucky your phone is recognized
Hello,
Frist, thank you for your answer. I had already tried this way but nothing. Finally, I fixed the problems (detect phone and unbrick phone).
1-In TWRP, I loaded recovery.img, boot.img and droidboot.img. Reboot in recovery mod, but I had the dead droid... so I pushed on power and volume up till I have a new screen.
2-In this part, I did a Wipe/Factory reset (useless I think), reboot in recovery mode (still dead droid). This time I selected the line "update with adb" (with an ASUS firmware). Then I had a message who told me update adb sideload. I did it and it installed the firmware. The smartphone reboot correctly.
Now, I have the same problem I had yesterday. In TWRP, my external storage isn't detected...
you use stock recovery or custom recovery, if you use stock recovery external-storage won't detected
Hello,
Thank you Bar4, I explained above how I fixed my problems. Now I'm searching a way to make TWRP (TWRP 3.0) detect my external storage to install Cyanogenmod 13.0. If it's really not possible, I would try with CWM (I have seen it in your screen).
Edit : I guess custom, TWRP. It's why I don't understand why it doesn't allow me to mount SD card or doesn't detect this same SD Card.
Mara Udé said:
Hello,
Thank you Bar4, I explained above how I fixed my problems. Now I'm searching a way to make TWRP (TWRP 3.0) detect my external storage to install Cyanogenmod 13.0. If it's really not possible, I would try with CWM (I have seen it in your screen).
Click to expand...
Click to collapse
i use twrp 3.0 too, but external sd detected. no need to put on external storage, you can flash Cm 13 through internal storage
if you want to install custom rom it's better if you make a backup first, so if happen you failed when installing new rom or maybe you don't like it (new rom) you can go back to stock rom through TWRP restore
Ok, failed again...
Try a different rom or redownload the rom it might have been a bad download.
The error message says there is no updater script in the zip meaning it can't install anything as the updater script tells what directories to install the files if I seen it correctly that is.
Sent from my ASUS_Z00AD using Tapatalk
Mara Udé said:
Ok, failed again...
Click to expand...
Click to collapse
maybe the CM 13 zip file you have download corrupted, try to re-download and re-flash it again. if still failed try another rom
( i'm using AICP Rom "based on CM 13 too") try it, it's awesome Rom ---> do clean install wipe all except internal storage and external storage
http://forum.xda-developers.com/zenfone2/development/rom-c-p-t3285951/post64645756#post64645756
http://opengapps.org/ ( select x86-6.0-nano )
Hi,
Sorry for this late answer. As I failed to install those roms (CM13, Bliss), I'm going to stop here and wait for the Marsmallow update. But I'm happy my phone isn't brik anymore.
Thank you all.