{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi guys! Here comes the first custom kernel in xda for L-preview
I'm presenting my personal kernel Code_Blue, that started as an addon for Purity ROM, called Purified Kernel.
Some of you that know me from other Nexus devices asked me to bring back the project, so I (finally) did.
My releases are Dragon_Shield powered and I'm going to share them with you.
All I want is full smoothness, performance and battery on my hammerhead, so I build always with Linaro optimized Cortex A15 toolchains.
This time I aim for a "stockish" feel lean build and for stability purposes I will stay with GCC 4.9.2 for now.
Code is based of android-msm-hammerhead-3.4-l-preview, forked from android/kernel_msm.
Useful and powerful picks are mandatory
Be sure to join Code_Blue users G+ community
You keep the spirit alive!
Kernel features:
Build on Ubuntu 14.04.1 x86_64 (Dragon_Shield VPS @ www.servercore.com.br - thanks @ChristianLetti)
Build with toolchains 2014.09 Linaro Cortex-A15 GCC 4.9.2 by @Christopher83
Full -Ofast+graphite support with device and target flags enhanced, linaro build improvements, etc
Based on android-msm-hammerhead-3.4-l-preview + own commits & cherry-picks on demand from several top devs, code aurora, linaro...
Kernel compressed with LZ4-r123, custom tweaked RAMdisk with GZIP (faster boot times)
Removed some debug and logging options
Enhanced performance and battery patches
Several CPU Governors (blu_active own governor is default)
Voltage Control UV_mV_table by @franciscofranco (UV down to 700mV possible)
Enhanced TCP methods (westwood is default)
Network and Wifi tweaks
Several I/O control (FIOPS is default)
Removed stock mpdecision and thermald
blu_plug: Dynamic hotplug for hammerhead (based in dyn_hotplug from @stratosk), with screenoff battery saving (max_freq 1190400 @ max dual core)
powersaver_mode available (switch usefull on light tasks, set max_freq 1728 MHz @ single core)
L msm_thermal by @franciscofranco
Optimized RWSEM, AES and SHA1 routines
Vibrator Strength tunable (60% default)
KGSL fixes and reworked GPU driver (removed doubled freqs, goes to idle @ 27MHz)
Gamma Control by @myfluxi, Piereligio_TrueRGBv7 profile by default)
LCD_KCAL driver added (RGB calibration by @savoca)
Tuned min manual brightness
OTG USB flash drives support FAT32, ExFAT and NTFS: use stickmount
CDROM emulation added to mass_storage (Drive Droid compatible)
Kexec (multirom) full support by @Tasssadar
Faux Sound Control, with In-call and headphone volume controls by @faux123 (must use FauxSound beta app v1.2.3 and up)
doubletap2wake available (0:disabled, 1:enabled, 2:enabled fullscreen), option to disable with power button or after wake_timeout (based on @flar2 and @showp1984 work)
USB Fast Charge (USB mode up to 900mA with MTP, by @flar2), Increase battery charging current to use higher input current (on AC mode by @faux123), proprietary charger detection
init.d support (busybox run-parts required)
Kernel cleaner script by @neobuddy89
Compatible with Kernel Manager, Kernel Tweaker, TricksterMOD, Franco Display Control and FauxSound Control
Featured on Rom Directory by @tFrost
Download latest Code_Blue Kernel zip on Test folder, flash in recovery and profit :highfive:
No mirrors allowed. Don't post hardlinks, use original links.
Changelog is available @ website also.
Builds are coded as follows:
test only for now on tests folder, no changelog, build with Linaro Cortex-A15 4.9.2 to minimize issues in troubleshoot.
Warning: If you come from other kernel, you should dirty flash your ROM before flashing Code_Blue zip to avoid problems.
Reflash ROM -> flash SuperSU -> Boot device -> flash Code_Blue.
Also uninstall or clean data of any kernel control app you're using.
If you like my work and wish to donate, just hit one of the buttons:
In €
In $
Thanks to @franciscofranco, @faux123, @LaboDJ @show-p1984, @flar2, @anarkia1976, @stratosk, @neobuddy89, @myfluxi, @Christopher83, @Cl3Kener
Special thanks to @DariosF and @ciprianruse88, for the friendship, initial push, knowledge and art.
Awesome graphics and design by @ciprianruse88
git source
COOL!!!!!
This is going be epic. Right on. Thanks
Sent from my Nexus 5 using XDA Premium 4 mobile app
Awesome
Sent from my Nexus 5 using XDA Premium 4 mobile app
So who's going to be the brave user and try this? I'm surprised to see a custom kernel already for Preview L! Kernel source has already been released? i haven't been following
1024 here to stay! Thank you for the L release. :thumbup:
Sent from my Nexus 5 using XDA Premium 4 mobile app
will try this ofc
thank you sir
trying this as soon as i get off work
Glad there's a kernel out! So thanks! . but Max CPU is stuck at 1574400. If i change to Max it just goes back down after hitting apply?
Sent from my Nexus 5 using XDA Premium HD app
striped121 said:
Glad there's a kernel out! So thanks! . but Max CPU is stuck at 1574400. If i change to Max it just goes back down after hitting apply?
Sent from my Nexus 5 using XDA Premium HD app
Click to expand...
Click to collapse
What app are you using to control the frequencies?
DonSolo said:
What app are you using to control the frequencies?
Click to expand...
Click to collapse
Trickstermod.
---------- Post added at 05:20 PM ---------- Previous post was at 05:19 PM ----------
striped121 said:
Glad there's a kernel out! So thanks! . but Max CPU is stuck at 1574400. If i change to Max it just goes back down after hitting apply?
Sent from my Nexus 5 using XDA Premium HD app
Click to expand...
Click to collapse
same problem here in trickstermod.
beaverhead said:
Trickstermod.
---------- Post added at 05:20 PM ---------- Previous post was at 05:19 PM ----------
same problem here in trickstermod.
Click to expand...
Click to collapse
"set on boot" is selected? Also you might have to copy some cpu.sh files if nothing else works
DonSolo said:
"set on boot" is selected? Also you might have to copy some cpu.sh files if nothing else works
Click to expand...
Click to collapse
trickstermod CLEAR
DonSolo said:
"set on boot" is selected? Also you might have to copy some cpu.sh files if nothing else works
Click to expand...
Click to collapse
now it just right .sheduler row en governor ondemand and cpufrequentie is on.
beaverhead said:
now it just right .sheduler row en governor ondemand and cpufrequentie is on.
Click to expand...
Click to collapse
Great! I think every Kernel management app isn't going to be compatible with every kernel and vice versa without messing around with a couple of options
I don't know if it is just me, but faux sound doesn't seem to be working. App starts up and says that the kernel is supported, but messing around with the toggles doesn't cause anything to happen. I'm assuming that the app or patch needs to be updated to work with L, or I'm just stupid and an not doing something right.
Well done Rui, good Job as ever [emoji106]
Tapatalk Team SlimRoms
Holy ****! Running just as nice as on KitKat. Great job again my fav dev!
DonSolo said:
So who's going to be the brave user and try this? I'm surprised to see a custom kernel already for Preview L! Kernel source has already been released? i haven't been following
Click to expand...
Click to collapse
I didn't think it was.
jsgraphicart said:
I didn't think it was.
Click to expand...
Click to collapse
That's what I thought. When it comes to XDA and the developers of the Open Source world, anything is possible! .. Just flashed it and its running nice so far.
Related
With permission, this is RcrdBrt's kernel on the Nexus S threads. He said that someone can post his kernel here, and IMO it's awesome, so here it is:
INK Kernel
Italian Nexus Kernel
It is based on latest 4.0.4 source and for now I added:
-Deep Idle
-SLQB memory allocator
-Voodoo Sound (colors+sound)
-BLX
-BLN
-BLD (I really like it)
-lazy governor
-undervolt INT voltages by default (as I learned from bedalus graphs, INT uv is more efficient and it gives us a bit of more battery).
-SIO tweaked scheduler
-optimized CRC32 algorithm
-optimized some other code and compiler flags
-many many under-the-hood tweaks by the boss Ezekeel
I merged in it Steve Garon's tweaks branch and Ezekeel's hiddenpart branch and I had a boost in performances.
I unchecked in the config the TV tuners modules, some debug options and unnecessary govs to have a lighter and more powerful kernel.
it's not gonna be an all in one kernel, I let join the project only the features that I think they are good (suggestions however are well accepted).
My default settings are:
Ondemand 100/1000
SIO
FIND ALL DOWLOAD LINKS HERE
New kernel sources: https://[email protected]/RcrdBrt/INK.git (sorry if there are mistakes with commits, I don't know well how they works. Still learning)
Credits: big thanks to steve.garon for his tweaks and because he helped me with sources
Ezekeel for hiddenpart branch and his mods
terryhau
supercurio
Proscia A. for his geekness
Google
Changelog:
GamerEdition -----> do not expect battery life from this, it's a special verison meant to gamers, 72 Hz screen and tweaked lazy governor (default gov)
v 1.6.1 ---------> for 9020 users ---> fixed wifi issue caused by the toolchain added code tweaks (high smoothness) and optimizations retweaked SIO. I compiled this with arm-linux-androideabi to test it (instead of arm-eabi of 9023 version)
This can be considered the dev branch
v 1.5 ------- Optimized compiler flags, tweaked SIO, new sources (again and again lol), removed wimax and voodoo colors to have a highly optimized version for i9023 and added custom voltages, removed other debug options, merged some new Ezekeel tweaks
Pixel Edition --------- added bigmem and tun.ko, merged again with steve garon tweaks for under-the-hood insane performances
v 1.4 ------fixed the fix to the voodoo colors
v1.3-------reverted back to stock branch and readded all the tweaks to prevent mistakes I've done , added SIO as default scheduler, fixed Voodoo, added FASTCHARGE patch, raised the INT voltages (but still undervolted) added deep idle
v1.2 skipped version
v1.1--------removed wheatley and bfq. made SIO scheduler as default. fixed voodoo colors and a bit of fixes for the laggy thing. Added bigmem and deep idle
v1.0---------inital release
Thank you for posting this Joe .
Sent from my Nexus S 4G using xda premium
np! this is the best kernel Ive used so far.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4 hours streaming, and 1.25 hour ST, notbad.
Probably no 4G right?
sent from my iPride 5G
Interested to see what everyone's experience is with this. No luck here.
†††
No luck here either. I tried to flash this kernel and it wouldn't even get past the boot screen. Just a big ol' bootloop..
4g works why wouldnt it?
Try it with a Fresh install of Codename 2.0.
My phone hates UV and its working great here for me, not one reboot. Make sure your phone isnt overclocked already when installing too.
joebarkho said:
4g works why wouldnt it?
Try it with a Fresh install of Codename 2.0.
My phone hates UV and its working great here for me, not one reboot. Make sure your phone isnt overclocked already when installing too.
Click to expand...
Click to collapse
Under changelog you said you removed WiMax. That may be why people are assuming no 4g...
Well Joe you must have the magic recipe. I tried to flash this on three fresh installs. AOKP, Euroskank, and Slim. No dice. But can't say I wasn't persistent. Can anyone confirm this working other than Joe?
†††
working here with pool party. 5 no 4g in my area, so I can't comment on that. wiped cache & dalvic, flashed & booted fine. been running for a few hrs now.
Sent from my Nexus S 4G using xda premium
FL0OD said:
Well Joe you must have the magic recipe. I tried to flash this on three fresh installs. AOKP, Euroskank, and Slim. No dice. But can't say I wasn't persistent. Can anyone confirm this working other than Joe?
†††
Click to expand...
Click to collapse
Yes flood . I ran it for a few days now. Had no issues with it . Back on matrix 19 now though.
Sent from my Nexus S 4G using xda premium
Thanks everyone my phone is haunted. Calling my local exorcist now
†††
FL0OD said:
Thanks everyone my phone is haunted. Calling my local exorcist now
†††
Click to expand...
Click to collapse
Lmao . That's how I feel with the trinity stuff . Only one that didn't give me a problem was violent otter c .
Sent from my Nexus S 4G using xda premium
Idk, maybe it just doesnt workout with your phone. Im not the dev, go to the OG post in the nexus s and post there if you have serious problems. I pmed the dev to stop by here for any issues.
zackandethan said:
Lmao . That's how I feel with the trinity stuff . Only one that didn't give me a problem was violent otter c .
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
See and I never have problems with any of those except for T144. Just goes to show how finicky these phones are. Thanks for posting this though Joe.:thumbup:
†††
What, does this only work with certain roms? So far I've seen people posting it working with Pool Party, and Codename. I use AOKP so has anyone else got this kernel to work with AOKP? I've also tried on a fresh install (AOKP) and no dice either..
i got a encription failed all my data has been erased an have to wipe my phone wtf???
Reno Skyy said:
i got a encription failed all my data has been erased an have to wipe my phone wtf???
Click to expand...
Click to collapse
Same here
†††
In
over
head
.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Magical Unicorn Kernel
With the blessing of a Sr. Moderator here on XDA, Magical Unicorn makes its return to XDA.
What is the goal of magical unicorn?
Code:
Best Performance without the need to overclock
Best Battery Life
original and innotive features
ROMS Supported
Code:
Samsung Based PureAOSP (aka GooglePlayEdition), Android 4.4 KitKat
Samsung Based PureAOSP (aka GPE), Android 4.4.2 KitKat
Samsung Based TouchWiz on Android 4.4.x (Not yet released by samsung)
Where to get ROMS?
[ROM] KOT49H【4.4.2】Danvdh - Google Edition【AOSP Features】【Optimized】01-01-2014b - NEW YEARS BUILD
http://forum.xda-developers.com/showthread.php?t=2539361
[ROM] VirginROM || a Google Play Edition ROM [4.3][4.4.2] - 12.17.13
http://forum.xda-developers.com/showthread.php?t=2343513
Devices Supported
Code:
Samsung S4 M919 <TESTED>
Samsung S4 I9505G <TESTED>
Samsung S4 I9505 <UNTESTED>
Release 1 is pretty much optimized stock with underclocking support.
This kernel is NOT locked to TW or AOSP, but it will NOT work on CyanogenMOD roms,
for the same reason google kernels dont work on CM on NEXUS devices.
This is NOT posted in original development, cause like most kernels here on XDA, the OP has very little original work in their kernel.
Im just sharing what was given to me, again with the blessing of a Sr. Moderator here on XDA.
About the Installer
Code:
The installer used does NOT alter your ramdisk, including any customizations
from your rom developer, as well as any TWEAKS other kernels may use.
These "tweaks" used by other developers may conflict with this kernel
causing random weirdness and reboots. This Kernel is tested on a i9505g
or a m919, depending on who tests it but EVERY build is tested. It is tested
using a STOCK rom.
This original feature of the installer also allows this kernel as is to be flashed
on any version of 4.4, including 4.4, 4.4.2 - as there is NO version specific
ramdisk.
Change Log
No credit will be given, or claimed - after all, its OPEN SOURCE
See source code for Copyright Owner Information
Code:
=>RELEASE 1 - Optimized Stock
BOARD: name the device (TMO)
L2: sync L2 speeds with CPU speeds, but cap at 1134000hz
CPU: allow underclocking (down to 81MHz)
DEBUG: disable a lot of DEBUGGING
GPU: add support for hardware revisions > 1.2
CPU: add dvfs monitor driver
KEXEC: add suport for kexec-hardboot
LINARO: linaro cpu power management
PANEL: add support for colorshifting via SYSFS, Default to Value of 1
exFAT: build exFAT support into zImage, and fix -O3 compile warnings
ARM: add NEON optimization flags
LIB: optimize square root algorithm
ARM: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs
ASM: word-at-a-time: make the interfaces truly generic
LIB: use generic strnlen_user and strncpy_from_user functions
LIB: use optimized MEMCOPY in STRING routines
LIB: use optimized MEMCOPY and MEMMOVE routines
MEM: allow lowmem to be non contiguous and mixed
FS: make system wide mounting possible
FS: change do_fsync() to fget_light()
RWSEM: steal writing sem for better performance
RWSEM: R/W semaphores implemented using ARM atomic functions
ARM: use -mcpu=cortex-a15 when targeting MSM Krait CPUs
VFP: compile using NEON flags
BUILD: apply -O3 fixes and build it using linaro -O3 flags
GITIGNORE: add root .gitignore file
BASE: stock samsung i9505 base - ML4
As REQUIRED by GPL, source, binutils, and toolchains used to build this kernel are listed below. (yes, GPL requires toolchain source)
SOURE CODE: http://projects.ziggy471.com/projects/samsung-8064ab-kk-xda/repository/revisions
TOOL CHAINS: http://releases.linaro.org/13.12/components/android/toolchain/4.7
BINUTILS: http://releases.linaro.org/13.12/components/toolchain/binutils-linaro
<REMOVED BY OP>
FAQ
What features, enhancements, fixes, etc will be added?
Im working with Chad, a person friend in real life, working on what features he is willing to allow posted to a
open and public git repo - what he is willing to share will be added to this kernel.
Click to expand...
Click to collapse
Now, you may ask: Chad had some features in open repos in the past, why are these features not in this kernel?
Well the answer to this is: some will be added shortly, while some will never be added due to a dispute of owership of the patch.
Click to expand...
Click to collapse
Will this kernel support CyanogenMod based rom, they are AOSP?
For reasons I wont go into on this forum, I have no plans to support CyanogenMod. Their rom is not TRUE aosp. For the same reason you can not use a google nexus kernel on a nexus CM build, this kernel wont work on CM builds.
Click to expand...
Click to collapse
Will you add support for additional devices?
YES - when some one, be it samsung, or a developer here ports a TRUE AOSP rom to a VZW, ATT, or SPR device - I will build the kernel for that device. As of today, there are only real AOSP builds available for TMO or the i9505/i9505g itself. If someone with a i9505 wishes to test on a GPE (real aosp) rom - let me know via PM. This kernel is tested to work on a i9505g.
Click to expand...
Click to collapse
Your OP states TW and AOSP, but I only see 1 kernel download, what is it for?
As I stated above, this kernel is android 4.4.x2 based, it is NOT AOSP or TW based. If the rom is a true AOSP build, and is version 4.4.x, it will work with this kernel. Samsung has not released TW for 4.4.x yet - so for now - its AOSP only. When TW is releasesd, the zip files you are downloading today will work on the TW builds.
Click to expand...
Click to collapse
and 1 more just in case
*stumbles in*
1st
Sent from my Nexus 5 using Tapatalk
Nice! Congrats
Sent from my EVO using Tapatalk
This kernel is NOT locked to TW or AOSP, but it will NOT work on CyanogenMOD roms
Click to expand...
Click to collapse
Specifically CM or any CM based?
ShinySide said:
Specifically CM or any CM based?
Click to expand...
Click to collapse
Wont work on any CM based. Some developers here on XDA claim they have built from source roms without ANY (and I mean ANY) CM code in them - this kernel "should" work on those roms. CM (and CM based) roms required a CM based kernel
erid2thed said:
roms without ANY (and I mean ANY) CM code in them
Click to expand...
Click to collapse
There's very few haha
Nice work tho bud
Sent from a Carbon'd Galaxy KitKat
Oh nice.
Sent from my SPH-L710 using Tapatalk
Cool Beans....
Sent from my HTCONE using Tapatalk
Sweet. Time to trade my Verizon S4
Sent from my SCH-I545 using Tapatalk
CONGRATZ !
Sent from my SCH-I535 using Tapatalk
Can you tell me about dvfs monitor and linaro CPU drivers?
Sent from my Optimus G using xda app-developers app
Thanks! Always good to see new development here. More kernels and Roms hopefully makes everyone's better with help of the community.
xboxfanj said:
Can you tell me about dvfs monitor and linaro CPU drivers?
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
GoogleFu my friend
Sent from my Nexus 5 using Tapatalk
xboxfanj said:
Can you tell me about dvfs monitor and linaro CPU drivers?
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
required patches for Chad's CPU/GPU Governor that makes voltage scaling dynamic for BOTH cpu and gpu based off of cpu (or gpu) load.
and they also help to support Chad's Dynamic FSB scaling mod, where the FSB clock will be scaled depending on cpu load - lower voltage and lower fsb = better battery life. This is one of the methods used to get double the battery life in the "full featured" kernel when compared to others.
Chad is working on a "open source" (or public) solution that does the same as his "private" builds.
erid2thed said:
required patches for Chad's CPU/GPU Governor that makes voltage scaling dynamic for BOTH cpu and gpu based off of cpu (or gpu) load.
and they also help to support Chad's Dynamic FSB scaling mod, where the FSB block will be scaled depending on cpu load - lower voltage and lower fsb = better battery life. This is one of the methods used to get double the battery life in the "full featured" kernel when compared to others.
Chad is working on a "open source" (or public) solution that does the same as his "private" builds.
Click to expand...
Click to collapse
Oh nice.
Sent from my SPH-L710 using Tapatalk
erid2thed said:
required patches for Chad's CPU/GPU Governor that makes voltage scaling dynamic for BOTH cpu and gpu based off of cpu (or gpu) load.
and they also help to support Chad's Dynamic FSB scaling mod, where the FSB clock will be scaled depending on cpu load - lower voltage and lower fsb = better battery life. This is one of the methods used to get double the battery life in the "full featured" kernel when compared to others.
Chad is working on a "open source" (or public) solution that does the same as his "private" builds.
Click to expand...
Click to collapse
Sounds kickass. Just a heads up, it looks like your source just went down. It was up earlier, so just thought I'd let you know.
Sent from my Optimus G using xda app-developers app
xboxfanj said:
Sounds kickass. Just a heads up, it looks like your source just went down. It was up earlier, so just thought I'd let you know.
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
should be back up now
NEW links posted in OP
old name conflicted w/ Chad's private build - last thing i want is his private full featured build on xda w/ no public source...
April 2 2015 - NEW VERSION 5.1! Ready for Lollipop 5.1!!!!!
Quick list of features:
Overclock up to 1.8GHZ
Voltage control
Custom GPU overclock
Dynamic Fsync Control
Interactive and ROW tweaks
I/O and MMC tweaks for better performance
Auto detects whether you are using data2sd, f2fs or EXT4 - meaning you don't need an f2fs version anymore. At boot time the kernel detects your file system and boots based on what YOU have. Also works with data2sd.
Extra governors and I/O Schedulers
Chanegelog
2015-04-02 - Version 5.1
- Updated the Wifi modules to work with CM12 and Omnirom
2014-10-01 - Version 5.0
- Updated to work with Lollipop.
2014-10-01 - Version 4.0
- Fixed the Bluetooth not turning on issue
- Fixed a few of the dock keys not working (such as disabling the touchpad)
- Added Pegasusq Governor
- Added SIO, VR and BFQ I/O Schedulers
- Made BFQ the default
- Created a separate build based on Linaro 4.8.3 Toolchains
2014-09-12 - Version 3.0
- I don't remember now LOL!
Everything should work fine, but this kernel has only been extensively tested on Omnirom and Zombi-Pop.
*NOTE - If you are running this kernel on Katkiss, Version 5.1 likely will not work. You will need 5.0 as 5.0 still uses the wifi modules that katkiss needs.
Also at the end of this post is an app called Performance Profiles. I would suggest anyone who uses this kernel on OMNIROM to install this app, as it will allow you to change the CPU frequency so you aren't always stuck at 1.7GHZ. In CM this feature can be added to the quick settings panel so it is not necessary. It will allow you to toggle between 1GHZ(power save) 1.3GHZ(normal mode) or 1.7GHZ(performance mode). I apologize for the hideous UI, but I'm not a app creater or designer. - NOTE - NOW OBSOLETE
[/HIDE]
A huge thanks to krash1256 and uga_boy for your very kind donations!
XDA:DevDB Information
[Kernel][5.1.x][GRIMLOCK KERNEL], Kernel for the Asus Transformer TF300T
Contributors
hardslog, lj50036
Source Code: https://github.com/Hardslog
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 5.1
Stable Release Date: 2015-04-02
Created 2014-03-26
Last Updated 2015-04-06
Download Links!
FLASHING THE KERNEL FROM RECOVERY
Steps
1. Download the Kernel below and save to your internal or external SD Card. Do not unzip the file.
GRIMLOCK KERNEL DOWNLOAD
GRIMLOCK KERNEL Full Mirror 1
GRIMLOCK KERNEL Full Mirror 2 Courtesy of the LEGEN..... wait for it.........
DARY @lj50036 :laugh:
Thank you!! Already excited and flashing!
Here's a benchmark:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sweet!! Your awesome and TY very much for your hard work.
Sent from my TF300T using xda app-developers app
post deleted
Yay! Installing after work tonight.
Installed, looking good.
I have a feeling like core0 is stuck at 1,7GHz on SmartassV2, so I switched back to interactive. Third pic is first half SmartassV2 and second half Interactive.
I hope we can expect NTFS support in the future? Not tomorrow but someday?
Really good work, man! :highfive:
Running well on cm11 for me right now.
Sent from my TF300T using Tapatalk
My previous post was on Omnirom. Now I flashed CBM and it is working too.
Awesome! A cm11 kernel has been at the top of my "Things I want/need for my tf300t" list, since cm11 Roms started showing up. lol
Thanks so much bro! You rock.
Sent from my TF300T using XDA Premium 4 mobile app
stenc55 said:
Installed, looking good.
I have a feeling like core0 is stuck at 1,7GHz on SmartassV2, so I switched back to interactive. Third pic is first half SmartassV2 and second half Interactive.
I hope we can expect NTFS support in the future? Not tomorrow but someday?
Really good work, man! :highfive:
Click to expand...
Click to collapse
What App is that?
CPU_Governors
cmendonc2 said:
What App is that?
Click to expand...
Click to collapse
If you are referring to smartassV2... Refer to the rootwiki here....CPU_Governors
lj50036 said:
If you are referring to smartassV2... Refer to the rootwiki here....CPU_Governors
Click to expand...
Click to collapse
No, I'm talking about the CPU information app. I've been looking around so i don't need to go into settings.
Is ART compatible on this kernel?
cmendonc2 said:
What App is that?
Click to expand...
Click to collapse
Android tuner
tmoulder said:
Is ART compatible on this kernel?
Click to expand...
Click to collapse
My CM11 is running ART and with this new kernel CPU 1.7GHz also working very good.
adyjob said:
My CM11 is running ART and with this new kernel CPU 1.7GHz also working very good.
Click to expand...
Click to collapse
I went ahead and tried it as well, running ART, and it purrs like a kitten so far.
Seems good so far,been running since yesterday and none of my Gameloft games are laggy.Thanks for this
Does someone know the answer at this question: what the ratio between overclock and battery drain? I mean, if I overclock to 1.7Ghz, what %% i will lost on battery? Stock, with a normal use, i'm charging at 2-3 days. Overclock to 1.7, what can I expect of battery life?
Rambytes said:
Does someone know the answer at this question: what the ratio between overclock and battery drain? I mean, if I overclock to 1.7Ghz, what %% i will lost on battery? Stock, with a normal use, i'm charging at 2-3 days. Overclock to 1.7, what can I expect of battery life?
Click to expand...
Click to collapse
No one can answer that accurately, since battery life is solely dependant on individual usage/configuration/added battery savings tweaks or lack thereof/etc...
Sent from my TF300T using Xparent Skyblue Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Liquid0624
Deadman96385
jsnweitzel
Somber73
TheBr0ken
Cdub50
CPA Poke
Code:
Linaro 4.9 GCC Toolchain
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimaztions
Slims DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slims QuickSettings
Halo (Renamed to bubble in settings)
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working wifi Tethering
Cell Broadcasts
Slims Configurable Power Menu
Slims Configurable Nav Bar
Gamma Configuration support
Custom animation controls (Listview)
LockScreen Notifications
And way more than this...
Code:
[url="http://goo.gl/Hkh7Kp"]LiquidSmooth v3.0 Full list of features[/URL]
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
[URL="https://github.com/LiquidSmooth/android_kernel_samsung_d2"]Deathly Kernel Source[/URL]
Code:
[url="http://goo.gl/azhHsk"]Main Thread (Download links and explanation)[/URL]
Please Support Liquid by Donating HERE
Deathly Kernel (Built in!)
*Deathly 1.3 Features*
Updated frequently from kernel.org and CM
CPU Related
CPU Voltage Control
CPU OC/UC
MSM_SLEEPER mod (max screen off frequency)
Will force the cpu cores to be set at 486Mhz to make battery life better.
Fast Charge
CPU Governor's:
Performance
PowerSave
UserSpace
Ondemand
OndemandX
Conservative
Lulzactive
Interactive
InteractiveX
LionHeart
Smartass2
Adaptive
Hyper
Intellidemand
Abyssplug
AbyssplugV2
Smartass
SmartassH3
Wheatley
BadAss
DanceDance
Intelliactive
SmartMax
Nightmare
AssWax
GPU Related
GPU Voltage Control
GPU OC (480Mhz, and 500Mhz steps)
GPU Governor:
Simple
TCP Congestion Control (Info http://goo.gl/GJ73jf )
Veno Set as default instead of cubic
The following were added
Advanced
BIC
HYBLA
HSTCP
ILLINOIS
LP
SCALABLE
VEGAS
RENO
VENO
YEAH
IO's
deadline
row
cfq
bfq (Default)
noop
sio
vr
zen
fifo
fiops
tripndroid
Dynamic F-Sync
This is a goodie by faux123, so all credits go to him for creating this unique feature !
Many kernels just disable synchronous writes to file to speed up system. While this works neatly, it is also dangerous as processes believe that file writes are actually synced to disk (or mmc media in our case) while this is not yet true ! The gain is a noticeably smoother user experience, but the risk of doing so is to have a corrupted filesystem if the device crashes, user pulls battery, battery fully depletes ... so that the device is turned off unexpectedly. To allow for the benefit, but to minimize the risk, faux123 created dynamic fsync, which while the screen is on, will defer file sync temporarily, but when screen gets turned off, a flush is called to synchronize all outstanding writes keeping your data safe.
SLIMBus OverClocked
This means SLIMbus will use its maximum potential to give the best audio quality for the hardware. Takes advantage of both hardware and the mods from zeroinfinity, also opening the door for more things that were previously limited by this. Researched and experimented by ZeroInfinity and Poondog
First! My first first as a matter of fact. Downloading now.
Edit: Do we post questions/comments here or in the other thread you linked that has the downloads?
Time to get this party started!!
Sick, nice to see the new forum. I just flashed the1/30 build on d2spr and everything seems to be working great. I did have one issue I had to install the exfat zip to pick up my SD card.
Sent from my SPH-L710 using XDA Premium 4 mobile app
1BadWolf said:
First! My first first as a matter of fact. Downloading now.
Edit: Do we post questions/comments here or in the other thread you linked that has the downloads?
Click to expand...
Click to collapse
Other thread
Downloading this now. Going to give it a run after I finish conditioning my new extended battery. Thanks again liquid and Deadman
Sent from my SPH-L710 using Tapatalk 2
I really, really want to try this but I just got all set up on slimkat...
Downloading now.
sent from my S3
I get no LTE with this version... I flash the 1/21 it works fine or a tw ROM this I get ehrpd...
Sent from my d2lte using Tapatalk 4
joeyddr said:
I get no LTE with this version... I flash the 1/21 it works fine or a tw ROM this I get ehrpd...
Sent from my d2lte using Tapatalk 4
Click to expand...
Click to collapse
I haven't seen lte come up yet either but I think were still getting it. I think its just not showing it cause my 3g is never this responsive. How is your 3g working? This rom is sick. Thanks LS.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Yeah not so much... Now I can only get LTE on a tw backup......
Sent from my Nexus 7 using Tapatalk 4
joeyddr said:
Yeah not so much... Now I can only get LTE on a tw backup......
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I lost LTE on this ROM as well as a Slimkat nandroid after flashing this. I'm trying to flash a TW ROM to see if I can get it back.
Edit: Flashed a stock TW ROM, updated PRL and profile, restored my slimkat nandroid and 4G is back.
MikeWjF said:
I lost LTE on this ROM as well as a Slimkat nandroid after flashing this. I'm trying to flash a TW ROM to see if I can get it back.
Click to expand...
Click to collapse
Same here. Flashing TW nandroid fixed it and now I'm back on my daily, Slim 4.3 build 2.2 w/LTE. Will try again with future builds of KK.
I actually had to flash TW first then go to the 1/21 build, going from the latest beta back to the 1/21 still broke LTE. It's a shame cause it was running so good.
Did you guys also flash the exfat.zip? People on Google+ are saying that's working.
hermeticist said:
Did you guys also flash the exfat.zip? People on Google+ are saying that's working.
Click to expand...
Click to collapse
That was for no data at all...
Technically the purpose of exfat.zip is to be able to access an exfat formatted sdcard. But users have reported getting data including LTE to work. There are many examples of this on Google+.
Just try it.
I have a D2SPR in an area where Sprint has no LTE so can't confirm that it works.
joeyddr said:
That was for no data at all...
Click to expand...
Click to collapse
I actually had LTE when I first flashed the ROM, then at some point it just went away and didn't come back.
hermeticist said:
Technically the purpose of exfat.zip is to be able to access an exfat formatted sdcard. But users have reported getting data including LTE to work. There are many examples of this on Google+.
Just try it.
I have a D2SPR in an area where Sprint has no LTE so can't confirm that it works.
Click to expand...
Click to collapse
I'll restore the backup and flash and let you know.
EDIT: nope flashed that and still no lte.
---------- Post added at 10:33 AM ---------- Previous post was at 10:24 AM ----------
MikeWjF said:
I actually had LTE when I first flashed the ROM, then at some point it just went away and didn't come back.
Click to expand...
Click to collapse
so did I after the first boot had LTE and after a reboot it was gone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A Kernel For OPO based on CM14 Branch
I will not be responsible for any damage to phone.
Click to expand...
Click to collapse
I do not work for money. I work for my Pleasure and Happiness which I get from developing, I will never ever ask you to donate me but if ever you like my work please press a THANKS which really motivates me to bring more STuFF!!! .
Click to expand...
Click to collapse
Features:
Code:
[B][U][COLOR="SeaGreen"]UKM support(synapse)
Kcal control by [user=4316709]@savoca[/user] (Ton thanks for making this)
Sound Control (Gain Volume)
Simple GPU Algorithm (faux123)
Camera Tweaks(Supressive logging ecc ecc)
CPU OC fixed - OC upto 2.88 ghz
Adreno Idler
KSM Optimized
Thermal Conflicts Fixed
Power-Efficient Qorques
Bricked Thermal.(no control. But temperature throttled)
bunch of governers
Speed and pvs levels exposed
Charge level interface. ( Cannot be operated for now. Need some changes in ukm)
MSM Limiter. - per app control
Cpu Voltage table
Deep Sleep enabled
boeffla led control and backlight control.
new IO schedulers
New TCP controllers
State Notified Driver
Added Bricked Hotplug
Added Intelli Plug Driver
Added Powersuspend
Added ASMP Hotplug
Optimized CPUBoost
New Logo Experimental
Oneplus Camera Vendor Edits
NFC Freq Drop to 19Hz
Much more.. [/COLOR]
[/U][/B]
Credits
cyanogen team
@ak @Megatron007 ( A good Friend of Mine. Helped me however, whenever I wanted. Because Of him this became possible ) @savoca for kcal
XDA
Please Let Me know if someones missing out there
Bugs
None
This kernel is Stable for now.. No major bugs except SeLinux... It should work with all the CM14 based roms. Nd about features, i will add them step. By step to. Make the kernel most stable and battery friendly.. Will keep this thread up time by providing all updates whenever necessary.
XDA:DevDB Information
AndyKernel , Kernel for the OnePlus One
Contributors
Andy1911
Source Code: https://github.com/Andy1911/AndyKernel_Noguat
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2016-10-20
Last Updated 2016-10-23
Reserved
Download Links -
20161024 - Grab It Here!
(Optional Link)- For Splash Logo Enabled
Added Bricked Hotplug
Added Intelli Plug Driver
Added Powersuspend
Added ASMP Hotplug
Optimized CPUBoost
New Logo Experimental
Oneplus Camera Vendor Edits
NFC Freq Drop to 19Hz
And More....
20161021 - Grab It Here!
- Bricked Thermal.(no control. But temperature throttled)
- bunch of governers
- speed and pvs levels exposed
- Charge level interface. ( Cannot be operated for now. Need some changes in ukm)
- MSM Limiter. - per app control
- Cpu Voltage table
- Deep Sleep enabled
- boeffla led control and backlight control.
- new IO schedulers
- New TCP controllers
- State Notified Driver
- Much more..
Grab it Here
Reserved
Good work Bro
Your kernel's source doesn't match to its feature list
ab123321 said:
Your kernel's source doesn't match to its feature list
Click to expand...
Click to collapse
Updated the Sources. Have A Look.
Edit: New Build will come tonight. Stay Tuned
Regards
Andy
Tnx for u work
Lets test
---------- Post added at 11:58 AM ---------- Previous post was at 11:21 AM ----------
Work on PureNexus N for Bacon.
Performance is very good.
@Andy1911 hi!
In governor with Synapse i cant see the option to choose Interactive, Ondemand or another.
Can u please check this?
Tnx!
Did you check the newer build? Please use the new one. Old one was missing msm-limiter.. Which was to be added. Please download the latest one
Andy1911 said:
Did you check the newer build? Please use the new one. Old one was missing msm-limiter.. Which was to be added. Please download the latest one
Click to expand...
Click to collapse
Is this kernel meant to be running in quad core mode? There doesn't seem to be any hotplug and all cores are active
I have made optimizations In the mp decision itself.. You don't need any special hotplug for modding the kernel.... And for performance it is best tuned. I will import the hotplug if really needed to... But yeah I will definitely give a thought upon your hotplug introduction concept and will plan my next build accordingly.. Thanks for the feedback
Kernel doesn't always run in the quad core mode.. It will when the screen is on.. I will make suitable changes in the next build.. In sleep time. No quad-core.
Regards
Andy
Andy1911 said:
I have made optimizations In the mp decision itself.. You don't need any special hotplug for modding the kernel.... And for performance it is best tuned. I will import the hotplug if really needed to... But yeah I will definitely give a thought upon your hotplug introduction concept and will plan my next build accordingly.. Thanks for the feedback
Kernel doesn't always run in the quad core mode.. It will when the screen is on.. I will make suitable changes in the next build.. In sleep time. No quad-core.
Regards
Andy
Click to expand...
Click to collapse
You can't modify mpdecision itself. It has closed source
Running great with latest COS 13.1.2
Battery is good without any tweaks, Thanks for the kernel
Have your kernel aux jack support ?
Thanks in advance
P$T said:
Have your kernel aux jack support ?
Thanks in advance
Click to expand...
Click to collapse
Umm not for now... Please give me the commit from repo. Of the kernel which u know having this feature. I would port it.. Thanks for all the positive responses...
Regards
Andy
I try to find this commits but not sure whitch one are suitable. You suould ask @acuicultor or @nikhil18. Their kernels have support aux jack, which tested myself and works fine.
P$T said:
I try to find this commits but not sure whitch one are suitable. You suould ask @acuicultor or @nikhil18. Their kernels have support aux jack, which tested myself and works fine.
Click to expand...
Click to collapse
Sure, I would Like to See those commits. Just Digitizer LcD destruction by my Dog.. Will come back in 3 days of replacement.. Because Oneplus One is Still A Killer!!
then will return to he aux jack commits..
Regards
Andy
New update up!
I request the users to try the optional link and please check whether Splash works and does the device boot...
Grab it Here!
Regards
Andy
Running great here on latest cm14 from jgcaap!
OnePlus One FTW
Thanks for your great work! It's been a long time to get over 6h of sot but using your kernel it's just amazing for battery life. Cheers mate
Sent from my A0001 using XDA-Developers mobile app